Back

 2002 Nissan 200SX S15  

Upload Entry
GHOSTY
  • GHOSTY
  • Member No.: 26,285
  • Member No.: 151,236
  • Joined: 7-December 08
  • Posts: 3,776
  • From: Brisbane
Post #1 post 6th June 2012 - 08:15 PM
Hey boost, pretty much finished my S15 so thought I'd chuck it up. In a nut shell; fresh rebuilt SR20, solid head, massive intake porting and port-matched exhaust side, custom Tomei cams - 260/10.5mm lift and retains VCT, splitfire coilpacks, Garret 3071r T2, on 16psi and on a very safe conservative tune on the rebuilt engine makes 240kw.

6 point roll cage, Driftworks CS7 coilovers, Cusco/Silk Road/D1 control arms, Tomei 2 way LSD, Work VSKF's, Apexi PowerFC engine management and RSM, Defi style gauges (oil temp, water temp, oil pressure), Greddy Oil relo kit, interchangble street and track exhaust systems from the dump back, Jim Berry custom Exedy Hyper Single clutch - 3600lb pressure plate, 4 puk solid center, 8.2mm carbonic buttons, 5 bolt half shafts, stainless steel everything, braided lines, drycell battery, nismo mounts, solid cradle bushes, custom metal guards etc, the list goes on and on.

Bought it completely stock in 2010, much time, money and effort put into it, hope you enjoy smile.gif

Many thanks to
- East Coast Customs
- JDM Garage
- Cameron's Bodyworks
- Countless mates who have donated their time and skills to help me get this to where it is today
















The old engine..





This post has been edited by GHOSTY: Jun 6 2012, 11:08 PM
2002 Nissan 200SX S15


--------------------
TOP

Comments

  • Boost Network 31
  • Stephen92
    Post #2

    can't see anything ?

    dont worry now i cant :S Looks awesome man, good work thumbsup.gif

    GHOSTY
    Post #3

    QUOTE (Stephen92 @ Jun 7 2012, 02:20 PM) *
    can't see anything ?

    boost uploader makes me cry, fixed now.
    xtreme_mitch
    Post #4

    looks bloody awesome mate, well done i'm sure alot of fun times are to be had in it smile.gif

    GHOSTY
    Post #5

    QUOTE (xtreme_mitch @ Jun 7 2012, 02:45 PM) *
    looks bloody awesome mate, well done i'm sure alot of fun times are to be had in it smile.gif

    It's a love/hate relationship..



    ...have fun...suff breaks...get depressed...decide to fix it...have fun...stuff breaks...get depressed...decide to fix it...

    ^ pretty much how it goes lol

    75 KINGSWOOD
    Post #6

    awesome so you took your old engine out in an underground garage?

    GHOSTY
    Post #7

    QUOTE (75 KINGSWOOD @ Jun 7 2012, 02:54 PM) *
    awesome so you took your old engine out in an underground garage?

    yeah, that was awkward... ph34r.gif

    75 KINGSWOOD
    Post #8

    QUOTE (GHOSTY @ Jun 7 2012, 03:55 PM) *
    yeah, that was awkward... ph34r.gif

    haha nice

    r32 gtst
    Post #9

    Love your work mate, u got good taste

    BlueKE
    Post #10

    This car use to wake me up at times, haha

    Looks simple, clean and sounds great,

    Nice work mate

    EssR20
    Post #11

    Epic car dude, no hard Parker eigher.

    Gerry Giraffe
    Post #12

    This looks amazing! Good work mate.

    Is this still running the 6 speed box??

    jamesjgts25t
    Post #13

    Really like how this looks now thumbsup.gif

    GHOSTY
    Post #14

    QUOTE (Gerry Giraffe @ Jun 7 2012, 06:23 PM) *
    Is this still running the 6 speed box??

    Yeah and surprisingly still going strong.
    Gerry Giraffe
    Post #15

    QUOTE (GHOSTY @ Jun 7 2012, 07:08 PM) *
    Yeah and surprisingly still going strong.


    Lol, i have read that they are not overly strong, kinda like the rb20 box's.

    Who dat
    Post #16

    love it michael! smile.gif

    GHOSTY
    Post #17

    QUOTE (Gerry Giraffe @ Jun 7 2012, 07:47 PM) *
    Lol, i have read that they are not overly strong, kinda like the rb20 box's.

    Yeah I know it certainly is strange how some break and some don't.

    Clint with the pewter s15 has a whole collection of broken 5 speeds in his garage
    Tristan with less than 300hp has gone through three 5 speeds
    Markos's old s15 smashed his 6 speed after the 200kw mark

    Funny you should mention the rb20 box, on my last car, the rb25 s1480, that was running an rb20 box and it loved life, (albeit only a stock rb25 making 305hp).

    I can understand people breaking them from crappy shifting, but when it strips the teeth off the gears under acceleration don't think there's much you can do to prevent that, if it's gonna break it's gonna break.

    Gerry Giraffe
    Post #18

    QUOTE (GHOSTY @ Jun 7 2012, 07:58 PM) *
    Yeah I know it certainly is strange how some break and some don't.

    Clint with the pewter s15 has a whole collection of broken 5 speeds in his garage
    Tristan with less than 300hp has gone through three 5 speeds
    Markos's old s15 smashed his 6 speed after the 200kw mark

    Funny you should mention the rb20 box, on my last car, the rb25 s1480, that was running an rb20 box and it loved life, (albeit only a stock rb25 making 305hp).

    I can understand people breaking them from crappy shifting, but when it strips the teeth off the gears under acceleration don't think there's much you can do to prevent that, if it's gonna break it's gonna break.


    My rb20 box only lasted 3 months behind my standard rb20 lol

    SR 5 speeds not much better?? I always thought they were pretty reliable.

    tavomagoo
    Post #19

    Clean 15

    gutless
    Post #20

    Can Appreciate everything youve done as you have done an amazing job but the look just isnt for me especially with the rims.

    S1480 is my favourite combo tongue.gif and with an RB its the icing on the cake tongue.gif

    Some day aha.

    Good luck with it!

    azitiz
    Post #21

    i used your guide on learning to drift and have loved your car ever since

    good work!

    socal
    Post #22

    Fuuuuucccckkkkkkk I just bought VS-KF's for my S15, although it's Pewter. What specs are yours? P.S. looks great smile.gif

    ITS2EZ
    Post #23

    are you selling this?? car is mint mate. built and driven the way its meant to be.

    osclux
    Post #24

    wow spun bearing much...

    GHOSTY
    Post #25

    QUOTE (socal @ Jun 8 2012, 01:16 PM) *
    Fuuuuucccckkkkkkk I just bought VS-KF's for my S15, although it's Pewter. What specs are yours? P.S. looks great smile.gif

    Yeah VSKF and Kranze are my favourite rims. My VSKF's are:
    Front - 18x9" +9 R-Disk (BKB) with 215/40/18
    Rear - 18x9.5" +14 O-Disk (BKB) with 225/40/18
    and each corner owes me about $500 on modified metal guard work + paint

    GHOSTY
    Post #26

    QUOTE (ITS2EZ @ Jun 8 2012, 01:25 PM) *
    are you selling this??

    I am actually. I've been playing with Silvia's since I was 17, I'm 25 next month and I'm supposed to be buying a house at the end of the year and at the rate I spend money on cars that's not going to happen so unfortunately it has to go.

    GHOSTY
    Post #27

    QUOTE (osclux @ Jun 8 2012, 01:31 PM) *
    wow spun bearing much...

    Yeah I was pretty devo'd. It happened on the 3rd corner of the 1st lap at the first drift day I went to after getting the new turbo, cams, injectors and fpr put in and tuned.

    Was even more disappointing because the car had been driving great for the week prior between getting it tuned and the track day. I even had it serviced (oils changed etc) before the track day. Sadly I think it was just that engines time.

    Vid of it dying, literally first lap (car in front spun twice that's why start/stop so often)
    Ticc
    Post #28

    am in love with how pumped your guards are in my opinoin looks way better that way then a wide body kit... i could only get about a 40mm flare out of mine.... looks weak when i see yours haha
    pulsarator
    Post #29

    awesome man! loving it! roll cage needs more zip ties tho tongue.gif

    socal
    Post #30

    QUOTE (GHOSTY @ Jun 8 2012, 01:40 PM) *
    Yeah VSKF and Kranze are my favourite rims. My VSKF's are:
    Front - 18x9" +9 R-Disk (BKB) with 215/40/18
    Rear - 18x9.5" +14 O-Disk (BKB) with 225/40/18
    and each corner owes me about $500 on modified metal guard work + paint


    Yeah I could see the pump in the guards, looks great. Didn't you have this up for sale ages ago?

    GHOSTY
    Post #31

    QUOTE (socal @ Jun 8 2012, 05:40 PM) *
    Yeah I could see the pump in the guards, looks great. Didn't you have this up for sale ages ago?

    Yeah but then I decided to keep it for another year.

    evl_ways
    Post #32

    dey some nice looking bearings bro

    • Member Login

      If you have a BoostCruising account enter your user name and password into the yellow box.

      Alternatively, you can quickly login with Facebook.

      If you don't have an account create one below.

      Create Account
    • Forgotten your password?
    • Login with Facebook

      Login using your Facebook account!

4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
Loading...
x