Nissan Silvia S13.4  

Page 1 of 2
Jump to page
dylantrickey
  • dylantrickey
  • Standard User
  • Member No.: 182,086
  • Joined: 2-December 09
  • Posts: 208
Post #1 post 21st January 2012 - 03:31 PM
Engine: red top sr tomei 272 12 mil lift cams, valve springs, rocker stoppers, ported, metal head gasket, greddy intake plenum, sard 800cc injectors, oilcooler, microtech td06 10cm, inbay inter cooler setup, turbosmart 38mm wastegate etc

Suspension: tein rear cusco front height and damper adjust, caster arms, adjustable tie end etc

Wheels: 18 x 10 rota grids

Modifications:

Stereo Audio / Visual: 50 mm wide body rear and same with the front, front guards are still metal for roadworthy purposes, head deck soon lol

Estimated Power: hoping 370 on a power run 340 all day

THINGS TO DO
new bottom end going in next week then to the dyno, getting full cage 2way and 300zx gearbox with a twin plate

LET ME KNOW WHAT U THINK
 Nissan Silvia S13.4
 Nissan Silvia S13.4
 Nissan Silvia S13.4
 Nissan Silvia S13.4
 Nissan Silvia S13.4

Comments

  • Boost Network 37
  • 75 KINGSWOOD
    Post #2

    Dont like it........... shit kit and shit fitment of kit (unless you havent finished boging the screw holes), interior and engine bay doesnt look to pleasant

    N16T
    Post #3

    Most people try to clean their cars up before posting...

    But I don't mind the S14 front end...

    driftboy69
    Post #4

    i like it looks mad radiator brackets look mint but there over engineerd 3mm or thiner steel strap will do the same job ha also like the piston ring compreser as a joiner

    Jordad
    Post #5

    I like it.

    Astra Boi
    Post #6

    madd

    jamesjgts25t
    Post #7

    I think that once tidied up a bit it'll actually be pretty cool.

    DECOY
    Post #8

    I quiet like it... Looking forward to seeing the final product....

    skidin
    Post #9

    interior is disgusting engine bay needs a serious tidy up and colour is poo

    dylantrickey
    Post #10

    QUOTE (skidin @ Jan 22 2012, 11:39 AM) *
    interior is disgusting engine bay needs a serious tidy up and colour is poo


    commo driver obviously there is heaps to there is still heaps to go its not going on the road tomorrow just wanted to know what people think of the project so far fuck there is some negative cock suckers out there

    dylantrickey
    Post #11

    and for the record this is going to be a track car so i am going to be ripping kits off all the time

    N16T
    Post #12

    If this is to be a track car, why not run fairly standard guards in case you have an off into a wall, easier to source... Keep the kit for show...

    skidin
    Post #13

    QUOTE (dylantrickey @ Jan 22 2012, 11:59 AM) *
    commo driver obviously there is heaps to there is still heaps to go its not going on the road tomorrow just wanted to know what people think of the project so far fuck there is some negative cock suckers out there



    sorry mate never owned a commo in my life i was just saying what i dont like if u dont want negative comments dont put a half done car up to show the world, i do like the kit and wheels and the motor sounds like it will be quiet tuff too but common if u think the interior is good? ur living in fairy land engine bay is messy to so why cant i tell you and paint each to there own i just dont like it

    dylantrickey
    Post #14

    QUOTE (skidin @ Jan 22 2012, 12:58 PM) *
    sorry mate never owned a commo in my life i was just saying what i dont like if u dont want negative comments dont put a half done car up to show the world, i do like the kit and wheels and the motor sounds like it will be quiet tuff too but common if u think the interior is good? ur living in fairy land engine bay is messy to so why cant i tell you and paint each to there own i just dont like it


    well that would of been a much nicer way of putting it interior has to red fix back brides waiting for them in the next container and s15 dash to go in later on obviously it is unfinished and the last thing i will be doing is the inside

    ms982
    Post #15

    Some people just don't know what a unfinshed project is, I've seen this car in person, It's a very nice car, specially if you can kinda picture what it will look like when it's done... Good job dude keep it up, I asked you about this thing at JDM one day when you were there smile.gif

    dylantrickey
    Post #16

    QUOTE (ms982 @ Jan 22 2012, 01:51 PM) *
    Some people just don't know what a unfinshed project is, I've seen this car in person, It's a very nice car, specially if you can kinda picture what it will look like when it's done... Good job dude keep it up, I asked you about this thing at JDM one day when you were there smile.gif


    sweet thanks bud yeh should come out really well there is alot of fuckwitz on this site tho lol think ill stick with sd

    VL87DB
    Post #17

    People who rag on incomplete project cars really boil my shit. Try doing ground up builds on your own cars, its not easy, and takes a ridiculous amount of time and money.


    I like it, the color is different for an import and it works, the wheels work, but if all that interior is to be ripped out i don't really see the need for posting that last pic. That driveline is sounding farking expensive too lol

    mottley06
    Post #18

    ever heard of an 'in the build' thread ass clown? its where people post progress of projects in hope of recieving possitive feedback and ideas towards the final product. if you dont like what you see, then why waste your time typing shit about it. just shows your lack of intelligence and utter waste of space as a human being. if you want to carry on like a chimp and throw shit at people, go to the zoo and scream at whoever walks past your cage.

    mate, make a post on nissansilvia.com, youll find a much better response there. i like where 'i see this unfinished project going'. who knows, you may not even hit walls and need to source guards very often...

    davieb_16
    Post #19

    looks like a promising build.

    guessing its a drift car, are they 18x10 on the front and have u done any steering lock mods yet cos that seems huge for an s13.

    when u register it is that just to drive to and from track?

    dylantrickey
    Post #20

    QUOTE (mottley06 @ Jan 22 2012, 02:11 PM) *
    ever heard of an 'in the build' thread ass clown? its where people post progress of projects in hope of recieving possitive feedback and ideas towards the final product. if you dont like what you see, then why waste your time typing shit about it. just shows your lack of intelligence and utter waste of space as a human being. if you want to carry on like a chimp and throw shit at people, go to the zoo and scream at whoever walks past your cage.

    mate, make a post on nissansilvia.com, youll find a much better response there. i like where 'i see this unfinished project going'. who knows, you may not even hit walls and need to source guards very often...


    haha. thanks bud yeh just asking on ideas of the car not if people think it looks shit. thanks for the post, fuck some people are so negative

    dylantrickey
    Post #21

    QUOTE (davieb_16 @ Jan 22 2012, 04:21 PM) *
    looks like a promising build.

    guessing its a drift car, are they 18x10 on the front and have u done any steering lock mods yet cos that seems huge for an s13.

    when u register it is that just to drive to and from track?



    hey bud yeh 18x10 on the front i got that spacer on the tie end for a little extra lock for now then when i get use to the build ill shorten the knuckles for even more

    dylantrickey
    Post #22

    QUOTE (VL87DB @ Jan 22 2012, 02:11 PM) *
    People who rag on incomplete project cars really boil my shit. Try doing ground up builds on your own cars, its not easy, and takes a ridiculous amount of time and money.


    I like it, the color is different for an import and it works, the wheels work, but if all that interior is to be ripped out i don't really see the need for posting that last pic. That driveline is sounding farking expensive too lol


    thanks buddy yeh cost so far to build ground up is just over 12k but thats including everything (from the shell to every nut and bolt) got heaps of help and good parts through JDM garage

    thomo(00_00)
    Post #23

    I'm loving the s14 front. Not my choice in colour but at least you are doing something different. IMO this thing would look amazing in a nice gloss black. Don't see why people are picking at the interior and engine bay, they are both easy things to tidy up and get looking mint along with the rest of the car (in the end it's a track car, not an Autosalon contender). Should be a lot of fun when you have it all done brah, good luck with it.

    andyb749
    Post #24

    would look good ounce cleaned up and painted a nice colour

    Bevsta
    Post #25

    Very nice man! fuck everyone

    dylantrickey
    Post #26

    QUOTE (Bevsta @ Jan 22 2012, 08:11 PM) *
    Very nice man! fuck everyone


    thanks bud need more people like you on this site colour suits it just need to see in real life

    gutless
    Post #27

    Good luck with this project man! Should be a Ripper when done smile.gif

    Post up finished project for all the people interested in the finished product wink.gif

    NOL499
    Post #28

    Looks like it'll be awsome once finished, but maybe try post ur car up when its complete, i know its hard 2 be patient becuz im going thru the same thing atm lol

    Ryan_1
    Post #29

    Bobby i saw this the other month at jdm. when all the front suspension was out of it. should go pretty good when it is done

    01sik
    Post #30

    i like it

    LifeBehindBars
    Post #31

    Its not all bling, so people dont like it :-/
    lol at no drivers seat, sitting on phone books? jks
    GL with it tho ;-)

    osclux
    Post #32

    just ignore all those dumb fuck commo drivers that only like faggot auto salon spec cars, you got a mad rig there and dont change it for anyone except yourself, fucking haters piss me off...

    Hobbsy
    Post #33

    sweet silvia mate, fuck the haters.

    SUB81
    Post #34

    going to look pretty good when its finished. thumbs up..

    Protius
    Post #35

    Is that a piston ring compressing tool holding the intake pipe on the turbo?

    • Member Login

      If you have a BoostCruising account enter your user name and password into the yellow box.

      Alternatively, you can quickly login with Facebook.

      If you don't have an account create one below.

      Create Account
    • Login with Facebook

      Login using your Facebook account!

    Page 1 of 2
    Jump to page
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
Loading...
x