Download PDF Manual

The camera is temporarily not functioning, due to snow, ice, or dirt on the windshield. Clean the area of the windshield in front of the camera. See page 162 for information on the camera’s limitations.


Driver Alert Sys Service required


The system is not functioning. Contact a trained and qualified Volvo service technician if the message remains in the display.


168


* Option/accessory, for more information, see Introduction.


Lane Departure Warning (LDW)– introduction


Operation and function


This function is designed to help reduce the risk of accidents in situations where the vehicle leaves its lane and there is a risk of driving off the road or into the opposite lane. LDW con- sists of a camera that monitors the lane’s side marker lines. The driver is alerted by an audible signal if the vehicle crosses a side marker line or the road’s center dividing line.


LDW can be switched on or off by pressing the button on the center console. A light in the but- ton illuminates when the function is on. The trip computer display shows Lane Depart Warn Standby <40 mph (Lane Depart Warn Standby <65 km/h) when the function is in standby mode. When LDW is in standby mode, the function is activated automatically after the camera has monitored the road’s side marker lines and the vehicle’s speed exceeds 40 mph (65 km/h). Lane Depart Warn Unavailable will be dis- played. If the vehicle’s speed falls below 37 mph (60 km/h), LDW will return to standby mode


1 When Increased sensitivity has been selected, a warning will be issued if a side marker line is crossed in this situation.


04 Driver support


Driver Alert System*


and Driver Alert Standby <40 mph will be displayed. If the camera can no longer monitor the road’s side marker lines, Lane Depart Warn Unavailable will be displayed. If the vehicle unexpectedly crosses the lane’s left or right side marker lines, the driver will be alerted by an audible signal. No warning signal will be given in the follow- ing situations: • The turn signal is being used • The driver’s foot is on the brake pedal1
• The throttle pedal is pressed quickly1
• If the steering wheel is moved quickly1
• In sharp turns that cause the vehicle’s


body to sway


See page 162 for information on the camera’s limitations.


WARNING


The driver will only be warned once for each time the wheels cross a marker line. No alarm will be given if a marker line is between the wheels.


04


* Option/accessory, for more information, see Introduction.


169


04 Driver support


Driver Alert System*


Settings Settings for Lane Departure Warning can be made in the menu system by pressing My Car. Go to Settings support systems Warning. There are two alternatives: On at start-up: This selection switches LDW on each time the engine is started. Otherwise,


Car settings Driver


Lane Departure


the system will be in the mode that it was in when the engine was switched off. Increased sensitivity: This selection increa- ses the function’s sensitivity. Warnings will be given at an earlier stage and fewer limitations apply. When this setting is being used, the sys- tem only needs to monitor lane marker lines on one side of the vehicle to change status to Lane Depart Warn Available.


04


Symbols and messages in the display


Symbol Message


Description


Lane departure warning ON/Lane departure warning OFF


The function is switched on or off. The text disappears after 5 seconds.


Lane Depart Warn Available


The function is monitoring the road’s marker lines.


Lane Depart Warn Standby <40
mph (Lane Depart Warn Standby <65 km/h)


The function has gone into standby mode because the vehicle's speed is below 40 mph (65 km/h).


Lane Depart Warn Unavailable


The road lacks clear marker lines.


170


* Option/accessory, for more information, see Introduction.


04 Driver support


Driver Alert System*


Symbol Message


Description


Windscreen Sensors blocked


The camera is temporarily not functioning, due to snow, ice, or dirt on the windshield. Clean the area of the windshield in front of the camera. See page 162 for information on the camera’s limitations.


Driver Alert Sys Service required


The system is not functioning. Contact a trained and qualified Volvo service technician if the message remains in the display.


04


* Option/accessory, for more information, see Introduction.


171


04 Driver support


Park assist*


Introduction The park assist system is designed to assist you when driving into parking spaces, garages, etc. It utilizes ultrasound sensors in the front bumper and rear bumper(s) to measure the dis- tance to a vehicle or an object that may be close to the front or rear of your vehicle. An audible signal and symbols in the audio sys- tem’s display indicate the distance to the object.


04


NOTE


A trailer hitch whose wiring is integrated with the vehicle's electrical system will be included in the measurement of the availa- ble space behind the vehicle.


WARNING


Park Assist is an information system, NOT a safety system. This system is designed to be a supplementary aid when parking the vehicle. It is not, however, intended to replace the driver's attention and judge- ment.


Activating/deactivating The system is activated automatically when the vehicle is started. – Press the Park assist button on the center console to temporarily deactivate the sys- tem(s). > The indicator light in the button will go out when the system has been deacti- vated.


Park assist will be automatically reactivated the next time the engine is started, or if the button is pressed (the indicator light in the button will illuminate).


NOTE


Park assist is disengaged automatically when the parking brake is applied.


Function


Park assist button The system is activated automatically when the vehicle is started. The indicator light in the but- ton in the center console illuminates when the system is on. • The front park assist system is active from the time the engine is started until the vehi- cle exceeds a speed of approximately 10 mph (15 km/h). It is also active when the vehicle is backing up.


• Rear park assist is active when the engine


is running and reverse gear has been selected.


172


* Option/accessory, for more information, see Introduction.


Audible signal The Park Assist system uses an intermittent tone that pulses faster as you come close to an object, and becomes constant when you are within approximately 1 ft (30 cm) of an object in front of or behind the vehicle. If there are objects within this distance both behind and in front of the vehicle, the tone alternates between front and rear speakers.


NOTE


The level of the audible signal can be low- ered/raised with the infotainment volume control. The level can also be set in the MY CAR menu system. See page 189 for a description of the menu system.


If the volume of another source from the audio system is high, this will be automatically low- ered.


Signals from the park assist system


View in the display (warning for objects front left/ right rear)


Visual indicator The audio system’s display gives an overview of the vehicle’s position in relation to a detected object. The marked sectors in the display indicate that one or more of the sensors has detected an object. The closer the car symbol comes to a sector, the closer the vehicle is to the object. If the infotainment system is switched off, the park assist system will not be able to provide a visual indicator. An audible signal will still be provided.


04 Driver support


Park assist*


Rear park assist


04


The distance monitored behind the vehicle is approximately 5 ft (1.5 m). The audible signal comes from the rear speakers. The system must be deactivated when towing a trailer, carrying bicycles in a rear-mounted carrier, etc, which could trigger the rear park assist system's sensors.


NOTE


Rear park assist is deactivated automati- cally when towing a trailer if Volvo genuine trailer wiring is used.


* Option/accessory, for more information, see Introduction.


173


04 Driver support


Park assist*


Front park assist


04


The distance monitored in front of the vehicle is approximately 2.5 ft (0.8 m). The audible sig- nal comes from the audio system's front speakers. It may not be possible to combine auxiliary headlights and front park assist since these lights could trigger the system's sensors.


NOTE


Front park assist is deactivated when the parking brake is applied and or when the gear selector is in the P position.


Faults in the system If the information symbol illuminates and Park assist syst Service required is shown on the information display, this indicates that the sys- tem is not functioning properly and has been disengaged. Consult a trained and qualified Volvo service technician.


CAUTION


In certain circumstances, the park assist system may give unexpected warning sig- nals that can be caused by external sound sources that use the same ultrasound fre- quencies as the system. This may include such things as the horns of other vehicles, wet tires on asphalt, pneumatic brakes, motorcycle exhaust pipes, etc. This does not indicate a fault in the system.


Cleaning the sensors


Location of the front sensors


174


* Option/accessory, for more information, see Introduction.


Location of the rear sensors The sensors must be cleaned regularly to ensure that they work properly. Clean them


with water and a suitable car washing deter- gent. Ice and snow covering the sensors may cause incorrect warning signals.


NOTE


If the sensors are obstructed by e.g., dirt, snow, or ice, this could result in false warn- ing signals from the park assist system.


04 Driver support


Park assist*


04


* Option/accessory, for more information, see Introduction.


175


04 Driver support


Rear Park Assist Camera (PAC)*


Introduction The Park Assist Camera uses the display in the center console to show the area behind the car while you are backing up. PAC also shows guiding lines in the on-screen image to indicate the direction that the vehicle will take as it moves rearward, which helps simplify parallel parking, backing into a tight space or when attaching a trailer to the vehicle.


Function


04


NOTE


A trailer hitch whose wiring is integrated with the vehicle's electrical system will be included in the measurement of the availa- ble space behind the vehicle.


WARNING


• PAC is designed to be a supplementary aid when parking the vehicle. It is not, however, intended to replace the driver’s attention and judgment.


• The camera has blind spots where it


cannot detect objects or people behind the vehicle.


• Pay particular attention to people or ani-


mals that are close to the vehicle.


The driver sees what is behind the vehicle and if a person or animal should suddenly appear from the side. PAC is mounted on the tailgate, near the open- ing handle. The camera has built-in electronics that help reduce the “fish-eye” effect so that the image shown on the screen is as natural as possible. This may cause some objects on the screen to “lean,” which is normal.


WARNING


Objects seen on the screen may be closer than they appear to be.


176


* Option/accessory, for more information, see Introduction.


Ambient lighting conditions The camera automatically monitors the ambi- ent lighting conditions behind the vehicle and constantly adjusts sensitivity to light. This may cause the brightness and quality of the image on the screen to vary slightly. Sensitivity to light is increased in dark conditions or in bad weather, which may affect image quality. If the image on the screen seems too dark, brightness can be increased with the thumb wheel on the lighting panel.


NOTE


In order to function properly, the camera lens should always be kept clean. This is particularly important in bad weather. Keep the lens free of dirt, ice or snow.


04 Driver support


Rear Park Assist Camera (PAC)*


Guiding lines


04


The lines on the screen are projected as if they were a path on the ground behind the vehicle and are affected by the way in which the steer- ing wheel is turned. This enables the driver to see path the vehicle will take, even if he/she turns the steering wheel while backing up.


NOTE


When backing up with a trailer, the guiding lines show the path that the vehicle will take, not the trailer.


Using PAC


Activation


PAC is activated when the gear selector is moved to R if the system is selected in the MY CAR menu system or by pressing the CAM button in the center console. See page 189 for a description of the menu system. If the Volvo Navigation System (VNS) is in use, PAC will automatically override the navigation system to show the camera's image on the screen instead of navigation information, for as long as reverse gear is selected.


Zoom The camera can be useful when attaching a trailer. Press CAM to zoom in on the trailer hitch (and press this button again to return to the normal camera view).


With the camera zoomed in on the trailer hitch, a guiding line showing the hitch's path toward the trailer will be projected. This feature can be activated in the MY CAR menu. See page 189 for a description of the menu system. The guiding lines for the wheels (see the following section "Guiding lines") and for the trailer hitch cannot be displayed at the same time. If the camera shows an enlarged (zoomed) image, turn TUNE counterclockwise, or press EXIT, CAM or OK to return to a normal view.


Deactivation Move the gear selector from R to another posi- tion. There is a slight delay in the PAC system, which means that the view from behind the vehicle will remain on the screen for approxi- mately 15 seconds after the gear selector has been moved from the R position or until the vehicle reaches a forward speed of 6 mph (10 km/h). The screen will then revert to the mode that it was in before R was selected and will, for example, display navigation system information.


NOTE


If any button on the center console control panel is pressed, the camera image will dis- appear from the display. Pressing CAM will return the camera image to the display.


* Option/accessory, for more information, see Introduction.


177


04 Driver support


Rear Park Assist Camera (PAC)*


WARNING


Keep in mind that the image on the screen only shows the area behind the vehicle. The driver must always watch for people, ani- mals, other vehicles, etc., near the sides of the vehicle when turning while backing up.


Marker lines


04


The dashed line (2) indicates the clear zone of approximately 5 feet (1.5 m) behind the bumper. These lines also indicate the outmost limits that any object (door mirrors, corners of the body, etc.) extends out from the vehicle, even when it turns. The "wheel tracks" (3) between the side marker lines show where the wheels will roll and can extend up to approximately 10.5 ft (3.2 m) behind the bumper if there are no objects in the way.


Vehicles equipped with Park Assist


The PAC system's lines


Marker line for a 1-foot (30-centimeter) zone behind the vehicle Marker line for the clear back-up zone


"Wheel tracks"


The solid line (1) indicates a zone within 1 ft (30 centimeters) of the rear bumper.


Colored fields (4-one per sensor) indicate distance If the vehicle is equipped with the optional Park Assist system, the distance to an object will be indicated more exactly and colored markers in the display indicate which of the sensor(s) has detected the object.


178


* Option/accessory, for more information, see Introduction.


The markers change color (from yellow to orange to red) as the vehicle comes closer to the object.


Marker (color)


Yellow


Orange


Red


Distance to


object


more than 5 ft (1.5 m)


5–1 ft (0.3–1.5 m)


0–1 ft (0–0.3 m)


Settings Press OK/MENU when a normal camera view is displayed and make the desired settings. Parking camera settings • Mark Guide lines to display the sidelines


while backing up.


• Mark Distance bars to display the inter-


secting lines while backing up.


Activating the system • Mark Automatic activation of rear


camera to activate PAC each time reverse gear is selected.


• Mark Off to turn off PAC completely. Summary • The camera is activated when the gear


selector is moved to R (this can be changed in the MY CAR menu) and the


04 Driver support


Rear Park Assist Camera (PAC)*


04


image is shown on the center console dis- play.


• When backing up, two solid lines are pro- jected on the screen to show the path that the vehicle's rear wheels will take. These lines are affected by movements of the steering wheel. The vehicle's approximate outer dimension are shown by two dashed lines.


• The graphic lines will not be displayed


when backing up with a trailer that is con- nected to the vehicle's electrical system. • Objects on the ground that are closer than 1 ft (30 centimeters) cannot be detected by the camera.


• The camera is active for approx.


5 seconds after the gear selector is moved to R or until the vehicle's speed exceeds 6 mph (10 km/h).


• The optional Park Assist sensors and the parking camera work together and infor- mation from the sensors is shown graphi- cally on the display.


• The graphic lines shown on the screen


when the vehicle backs up can be disabled in the settings menu.


• Manual zoom can be selected in the MY


CAR menu.


• The system can be switched off by press-


ing CAM. By default, the system is acti- vated when the gear selector is moved to


R. This setting can be changed in the MY CAR menu.


• If there are two cameras installed on the vehicle*, to switch between cameras, turn TUNE (at least one of the cameras has to be active), press CAM repeatedly or use the center console controls. If the front camera is on, it overrides the optional park assist system's visual indicator but there will still be an audible signal.


Limitations Even if a fairly small section of the screen image appears to be obstructed, this may mean that a relatively large area behind the vehicle is hid- den and objects there may not be detected until they are very near the vehicle.


NOTE


Bicycle carriers or other accessories moun- ted on the tailgate may obstruct the cam- era's field of view.


Keep in mind • Keep the camera's lens free of dirt, ice and snow. Remove ice and snow carefully to avoid scratching the lens.


• Clean the lens regularly with warm water


and a suitable car washing detergent.


* Option/accessory, for more information, see Introduction.


179


04 Driver support


Blind Spot Information System*


Introduction


WARNING


NOTE


04


BLIS camera


Indicator light


BLIS symbol


The Blind Spot Information System (BLIS) is an information system that indicates the presence of another vehicle moving in the same direction as your vehicle in the side-view mirror's "blind area."


CAUTION


The BLIS system should only be repaired by a trained and qualified Volvo service tech- nician.


The door panel indicator light illuminates on the side of the vehicle where the system has detected another vehicle. If your vehicle is passed on both sides at the same time, both lights will illuminate.


BLIS has an integrated function that alerts the driver if a fault should occur with the system. For example, if one or both of the system's cameras are obscured, a message (see the table on page 182) will appear in the informa- tion display in the instrument panel. If this occurs, clean the camera lenses. If necessary, the system can be temporarily switched off (for instructions, see page 182).


• BLIS is an information system, NOT a


warning or safety system.


• BLIS does not eliminate the need for you to visually confirm the conditions around you, and the need for you to turn your head and shoulders to make sure that you can safely change lanes.


• As the driver, you have full responsibility


for changing lanes in a safe manner.


The system is based on digital camera tech- nology. The cameras are located beneath the side-view mirrors. When one (or both) of the cameras have detected a vehicle in the blind area (up to approximately 10 ft. (3 meters) from the side of your vehicle, and up to approximately 31 ft. (9.5 meters) behind the side-view mirror), see the illustration, the indicator light in the door panel illuminates. The light will glow continu- ously to alert the driver of the vehicle in the blind area.


Areas monitored by BLIS Distance A = approx. 31 ft. (9.5 meters), Distance B = approx. 10 ft. (3 meters)


180


* Option/accessory, for more information, see Introduction.


04 Driver support


Blind Spot Information System*


Darkness BLIS reacts to the headlights of surrounding vehicles. In order to be detected by BLIS, a vehicle in the blind area must have its head- lights on. This means, for example, that the system will not detect a trailer without head- lights that is being towed behind a car or truck.


NOTE


If the BLIS indicator lights illuminate occa- sionally even when there are no other vehi- cles in the blind area, this does not indicate a fault in the system. In the event of a fault, Blind spot syst. Service required will be displayed.


WARNING


• BLIS does not react to cyclists or


mopeds.


• BLIS does not react to vehicles that are


standing still.


• The BLIS cameras have the same limi- tation as the human eye. In other words, their "vision is impaired" by adverse weather conditions such as heavy snowfall, intense light directly into the camera, dense fog, etc.


Limitations In certain situations, the BLIS indicator light(s) may illuminate even when there are no other vehicles in the area monitored by the system.


The following are several examples of situa- tions in which the BLIS indicator light(s) may illuminate even when there are no other vehi- cles in the area monitored by the system.


04


Light reflected from a wet road surface


When does BLIS function The system functions when your vehicle is moving at speeds above 6 mph (10 km/h).


When you pass another vehicle: The system reacts when you pass another vehicle at a speed of up to 6 mph (10 km/h) faster than that vehicle. When you are passed by another vehicle: The system reacts if your vehicle is passed by another vehicle at a speed of up to 43 mph (70 km/h) faster than your vehicle.


WARNING


• BLIS does not function in sharp curves. • BLIS does not function when your vehi-


cle is backing up.


• If you are towing a wide trailer, this may prevent the BLIS cameras from detect- ing other vehicles in adjacent lanes.


How BLIS functions in daylight and darkness Daylight BLIS reacts to the shape of surrounding vehi- cles. The system is designed to help detect motor vehicles such as cars, trucks, buses, motorcycles, etc.


* Option/accessory, for more information, see Introduction.


181


04 Driver support


Blind Spot Information System*


CAUTION


• Clean the lenses carefully to avoid


scratching.


• The lenses are electrically heated to


help melt ice or snow. If necessary, gen- tly brush away snow from the lenses.


The vehicle's own shadow against a large, light, smooth surface such as barriers between lanes on a highway


04


Switching BLIS on and off


Sunlight directly in the camera when the sun is low on the horizon


Cleaning the BLIS camera lenses In order to function optimally, the BLIS camera lenses must be kept clean. They can be wiped clean with a soft cloth or wet sponge.


BLIS is automatically activated when the igni- tion is switched on. The indicator lights will provide confirmation by flashing 3 times. • The system can be switched off by press- ing the BLIS button in the center console (see the illustration). The indicator light in the button goes out when the system is


182


* Option/accessory, for more information, see Introduction.


switched off, and a text message is dis- played.


• BLIS can be switched on again by pressing the button. The indicator light in the button will illuminate and a new text message will be displayed. Press the OK button (see page 187) to erase the message.


Depending on the vehicle's optional equip- ment, there may not be space for the BLIS but- ton in the center console. In this case, BLIS can be switched on and off in the menu system by pressing MY CAR and going to Settings BLIS. See page 189 for a Car settings description of the menu system.


BLIS system messages Text in the dis- play


System status


Blind spot syst. Service required


Blind spot syst. Camera blocked


Blind-spot info system ON


BLIS not functioning properly. Contact an authorized Volvo service technician.


BLIS camera obscured. Clean the lenses.


BLIS system on


Text in the dis- play


Blind-spot info system OFF


Blind spot syst. Reduced function


System status


BLIS system off


The BLIS cameras' function has been reduced due to weak or impaired data transfer between the BLIS system's cameras and the vehicle's electrical system. The cameras will reset themselves when this data transfer has returned to normal.


04 Driver support


Blind Spot Information System*


04


* Option/accessory, for more information, see Introduction.


183


Volvo Sensus........................................................................................ 186
Menus and messages........................................................................... 187
The MY CAR menus.............................................................................. 189
Climate system..................................................................................... 195
Trip computer........................................................................................ 204
Active chassis system–Four C*............................................................. 206
Passenger compartment convenience................................................. 207


184


* Option/accessory, for more information, see Introduction.


COMFORT AND DRIVING PLEASURE


05 Comfort and driving pleasure


as well as other options such as the park assist camera(s), etc. Volvo Sensus uses the screen in the center instrument panel to display information and selections are made using this panel’s controls and buttons. Certain features can also be con- trolled using the steering wheel keypad. Press MY CAR to present all of the available settings related to driving and/or controlling the vehicle, such as City Safety, setting the clock, lock settings, etc. Press RADIO, MEDIA, TEL, NAV* and CAM* to change a source and to activated systems or functions such as AM, FM1, CD, DVD, Blue- tooth, navigation* and the park assist camera *. See the respective sections in this manual for more detailed information about your vehicle's various features and functions.


Volvo Sensus


Introduction


05


Center console control panel


Volvo Navigation System (VNS)* – NAV: see the separate VNS manual for operating instructions. Infotainment (RADIO, MEDIA, TEL): see page 214 . Vehicle-related settings - MY CAR: see page 189. Park assist camera - CAM*: see page 176.


Climate system: see page 195.


Volvo Sensus is the operating system in your vehicle providing a coordinated interface for a number of functions such as the individualized settings that can be made in the MY CAR menus, the climate and infotainment systems


186


* Option/accessory, for more information, see Introduction.


Main instrument panel


Information display and menu controls


OK – access to the list of messages and message confirmation. Thumb wheel – browse among menus and options in the list of functions. RESET – reset the active function. Used in certain cases to select/activate a function, see the explanation under each respective function.


The menus shown on the information displays in the instrument panel are controlled with the left lever. The menus shown depend on ignition mode. Press OK to erase a message and return to the menus.


Menu overview Driving distance on current fuel reserve


05 Comfort and driving pleasure


Menus and messages


Average Instantaneous Average speed Current speed in mph (Canadian models only) Engine oil level* Calibrate tire pressure*


Press OK to acknowledge and scroll among the messages.


NOTE


If a warning message appears while you are using the trip computer, the message must be read and confirmed by pressing OK before the previous activity can be resumed.


Messages


When a warning, information or indicator sym- bol comes on, a corresponding message appears on the information display. An error message is stored in a memory list until the fault is rectified.


Message


Stop engineA


Stop safelyA


05


Description


Stop and switch off the engine as soon as possible. Serious risk of damage. Contact an author- ized Volvo work- shop.


Stop and switch off the engine. Serious risk of damage. Contact an author- ized Volvo work- shop.


* Option/accessory, for more information, see Introduction.


187


05 Comfort and driving pleasure


Menus and messages


Message


Description


Message


Description


Maintenance over- due


Temporarily OFFA


Low battery Power save mode


If the service inter- vals are not fol- lowed, the warranty does not cover any damaged parts. Contact an author- ized Volvo workshop for service.


A function has been temporarily switched off and is reset automatically while driving or after starting again.


The audio system is switched off to save current. Charge the battery.


A There will also be a system-specific part of this message


Service urgentA


Service requiredA


05


See manualA


Book time for maintenance


Time for regular maintenance


Have the vehicle checked by an authorized Volvo workshop immedi- ately.


Have the vehicle checked by an authorized Volvo workshop as soon as possible.


Read the owner's manual.


Time to book service at an authorized Volvo retailer.


Time for regular service at an author- ized Volvo work- shop. The timing is determined by the number of miles driven, number of months since the last service, engine running time.


188


Operation


Center console controls


Introduction


The menu system provides access to menus for operating many of the vehi- cle's functions, such as setting the


clock, door mirrors, locks, etc. Navigating in the menus is done using the but- tons on the center console control panel or with the right-side steering wheel keypad. Some of the features mentioned in this section are optional.


05 Comfort and driving pleasure


The MY CAR menus


• Reject and incoming phone call • The current function will be cancelled • Characters that have been entered will be


erased


• The most recent selection will be cancelled • Go back (upward) in the menu system A long press will take you to the highest menu level (the main view), giving you access to all of the vehicles/menus. See page 215 for addi- tional information.


Steering wheel keypad


Center console controls for menu navigation Press MY CAR to access the My Car menus. Press OK/MENU to select a highlighted selection or to store a certain function in the system's memory. Turn to navigate up/down among menu selections. EXIT


EXIT functions The results of a short press on EXIT vary, depending on where the cursor is and where you are in the menu structure.


The keypad varies according to the vehicle's equipment


Turn the thumb wheel to go up/down among menu selections. Press the thumb


05


``


189


05 Comfort and driving pleasure


The MY CAR menus


wheel to make a selection or store a func- tion in the system's memory. EXIT.


Paths The current menu level is displayed at the upper right of the center console display. Menu paths are displayed as follows, for example:


Settings


Car settings


Doors unlock


Lock settings Driver door, then all


The following is an example of how to set a function in the menu system:


1. Press the MY CAR button on the center


console control panel.


2. Navigate to a menu, for example


Settings using the thumb wheel (1) and press it to open a submenu.


3. Navigate to the desired submenu such as


Car settings.


4. Navigate to Lock settings and press the


thumb wheel to open a new submenu.


5. Navigate to Doors unlock and press the thumb wheel to open a submenu with alter- natives that can be selected.


05


190


6. Use the thumb wheel to move to the


desired choice and press the thumb wheel to put an X in the box.


7. Finish by exiting the menu system either one step at a time with short presses on EXIT (2) or press and hold this button to return to the main menu.


The OK/MENU (2), EXIT (4) and control (3) in the center console can be used in the same way.


MY CAR When the MY CAR symbol has been selected, the following menu alternatives are displayed.


My XC70


MY CAR My XC70
The display shows all of the vehicle's driver support systems, which can be activated/ deactivated here.


• My XC70
• Support systems • Settings


Driver support systems


Doors unlock


See page 55 for more information.


05 Comfort and driving pleasure


The MY CAR menus


MY CAR


Support systems


(MY CAR > Support systems) The screen shows the current status (settings) for the vehicle's driver support systems.


Menu settings The following pages list the main menus/sub- menus and possible selections. Car key memory See pages 86 and 55 for more information. Lock settings


Automatic door locking


All doors Driver door, then all


Keyless entry


All doors Any door Doors on same side Both front doors


Audible confirmation


See page 55 and 63 for more information. Reduced Guard


Activate once Ask when exiting


See page 70 for more information. Side mirror settings Fold mirrors Tilt left mirror Tilt right mirror


See page 105 for more information. Light settings


Door lock confirmation light Unlock confirmation light


Approach light duration


Off 30 sec 60 sec 90 sec


See page 57 for more information.


Home safe light duration


30 sec 60 sec 90 sec


See page 99 for more information.


Triple indicator


See page 98 for more information.


Daytime running lights


See page 92 for more information.


Active bending lights


See page 95 for more information. Tire pressure system


Warns if tyre pressure is too low


05


``


191


05 Comfort and driving pleasure


The MY CAR menus


Calibrate tire pressure


Lane Departure Warning


See page 317 for more information. This sys- tem is optional in Canada. Steering wheel force


High Medium Low


See page 206 for more information. Reset car settings This feature returns the "Car settings" menu to the original factory settings.


05


MY CAR systems


Settings


Driver support


Collision Warning


Collision Warning Warning distance


Long Normal Short


Warning sound


See page 160 for more information.


Lane Departure Warning On at start-up Increased sensitivity


See page 169 for more information. Road Sign Information


On Off


Speed alert


On Off


DSTC See page 132 for more information. City Safety See page 152 for more information. BLIS See page 180 for more information. Distance Alert See page 149 for more information. Driver Alert See page 166 for more information.


192


MY CAR


Settings


System options


Set/change time See page 80 for more information. Time format 12 h 24 h


Screen saver The contents of the screen are replaced by another image if this selection is marked. The contents of the screen will be displayed again if one of the buttons (1-4) is pressed, see page 189. Uncheck the selection to turn the screen saver off. Language Select the language for menu texts. Show help text This displays help texts for the current menu. Distance and fuel units


MPG (UK) MPG (US) km/l l/100km


05 Comfort and driving pleasure


See page 204 for more information about the trip computer. Temperature unit


Celsius Fahrenheit


Select the temperature scale to be displayed by the climate control unit. Volume levels


Voice output volume Front park assist volume Rear park assist volume Phone ringing volume


Reset system options This feature returns the "System options" menu to the original factory settings.


MY CAR


Settings


Voice settingsA.


A Only on vehicles with the optional Volvo Navigation System


and/or a Bluetooth(cid:159)-connected cell phone


Voice tutorial Select this menu alternative and press OK for spoken information about how the system works.


Voice command list


Phone commands


Phone Phone call contact Phone dial number


Navigation commands


Navigation Navigation repeat instruction Navigation go to address


General commands


Help Cancel Voice tutorial


The menu alternatives under Phone commands show examples of the voice com- mands available when a cell phone is con- nected to the Bluetooth(cid:159) hands-free system. See page 251 for more detailed information. The menu alternatives under Navigation commands show examples of the voice com- mands available for the optional Volvo Navigation System. Refer to the navigation system's manual for detailed information.


The MY CAR menus


Voice user setting


Default setting User 1
User 2


Two user profiles can be set, which is useful if more than one person uses voice commands regularly. Default setting resets the factory settings. Voice training User 1
User 2


Voice training enables the system to become familiar with the driver's voice and pronuncia- tion. A list of phrases is presented on the screen for the driver to read aloud. When the system has registered the driver's pronuncia- tion, no additional phrases will be displayed. After completed voice training, select User 1
or User 2 in Voice user setting to set the sys- tem to the current user. Voice output volume • A volume control will be displayed. To set


the volume level:


1. Adjust the volume using the thumb wheel 2. Test the setting by pressing OK 3. Store the setting and leave the menu by


pressing EXIT.


05


``


193


05 Comfort and driving pleasure


The MY CAR menus


Voice POI list Edit list


The navigation system has a large number of points of interest (POIs). A maximum of 30 POIs can be stored in this list. The menu alternative Voice POI list is only displayed if the vehicle is equipped with the optional Volvo Navigation System. Refer to the navigation system's manual for detailed infor- mation.


MY CAR


Settings


Audio settings


05


See page 214 for more information about the infotainment system.


MY CAR


Settings


Climate settings


Automatic blower adjustment


Normal High Low


Recirculation timer Automatic rear defroster Interior air quality system Reset climate settings


194


This feature returns the "Climate settings" menu to the original factory settings. For more information about the climate sys- tem, see page 195.


MY CAR


Settings


Favourites (FAV)


See page 220 for more information about this feature.


MY CAR


Settings


Information


Number of keys See page 54 for more information. VIN number See page 359 for more information. DivX® VOD code See page 236 for more information. Bluetooth software version in car See page 224 for more information. Map and software version Refer to the optional Volvo Navigation System manual for more information.


Introduction


Air conditioning The vehicle is equipped with Electronic Climate Control (ECC). The climate control system cools, heats or dehumidifies the air in the pas- senger compartment.


NOTE


• The air conditioning can be switched


off, but to ensure the best possible cli- mate comfort in the passenger com- partment and to prevent the windows from misting, it should always be on. • In warm weather, a small amount of water may accumulate under the car when it has been parked. This water is condensation from the A/C system and is normal.


Sensor location • The sunlight sensor is located on the top


side of the dashboard.


05 Comfort and driving pleasure


NOTE


The sunlight sensor monitors which side of the car that is most exposed to sunlight. This can mean that the temperature may differ between the right and left-side air vents, even if the temperatures set for both sides of the passenger compartment are the same.


• The temperature sensor for the passenger compartment is located below the climate control panel.


• The outside (ambient) temperature sensor


is located on the door mirror.


• The humidity sensor* is located in the inte-


rior rearview mirror.


NOTE


Do not cover or block the sensors with clothing or other objects.


Side windows and moonroof To ensure that the air conditioning works opti- mally, the side windows, and the optional moonroof should be closed.


Fog on the inside of the windows The defroster function should be used to remove fog or mist from the inside of the win- dows. Keeping the windows clean with a com-


Climate system


mercially available window washing spray will also help prevent fogging or misting.


Temporary shut-off of the air conditioning The air conditioning is momentarily disen- gaged during full-throttle acceleration or when driving uphill with a trailer. This may result in a temporary increase in cabin temperature.


Ice and snow Always keep the air intake grille at the base of the windshield free of snow.


Climate system maintenance Special tools and equipment are required to maintain and carry out repairs on the climate system. Work of this type should only be done by a trained and qualified Volvo service tech- nician.


Refrigerant Volvo cares about the environment. The air conditioning system in your car contains a CFC-free refrigerant – R134a. This substance will not deplete the ozone layer. The air condi- tioning system contains 1.8 lbs (820 g) of R134a. The systems uses PAG oil.


Passenger compartment filter Replace the cabin air filter with a new one at the recommended intervals. Please refer to


05


* Option/accessory, for more information, see Introduction.


195


05 Comfort and driving pleasure


Materials used in the cabin The materials used in the cabin have been developed to help minimize the amount of dust and make the cabin easier to keep clean. All floor mats can be easily removed for cleaning. Use car cleaning products recommended by Volvo. See also the information beginning on page 351.


Menu settings The default settings for four of the climate sys- tem's functions can be changed in the menu system. • Blower speed in automatic mode. • Recirculation timer for passenger com-


partment air.


• Automatic rear window defrosting. • The optional Interior Air Quality System


(IAQS).


The functions can also be returned to factory settings in the menu system. See page 189 for a description of the menu system.


Air distribution


The incoming air is distributed from a number of different vents in the passenger compart- ment. Air distribution is fully automatic in AUTO mode. If desired, air distribution can be controlled manually, see page 202.


Climate system


your Warranty and Service Records Informa- tion booklet, or consult a trained and qualified Volvo service technician for these intervals. The filter should be replaced more often when driving under dirty and dusty conditions. The filter cannot be cleaned and therefore should always be replaced with a new one.


NOTE


There are different types of cabin air filters. Ensure that the correct type is installed.


Interior Air Quality System (IAQS) A multifilter helps reduce gases and particles in the incoming air, thereby reducing the levels of odors and contaminants entering the vehi- cle. The air quality sensor detects increased levels of contaminants in the outside air. When the air quality sensor detects contaminated outside air, the air intake closes and the air inside the passenger compartment is recircu- lated, i.e. no outside air enters the vehicle. The filter also cleans recirculated passenger com- partment air.


NOTE


Contact your Volvo retailer for IAQS air filter replacement intervals.


05


196


Air vents in the dashboard


Air vents in the door pillars


05 Comfort and driving pleasure


Climate system


Open


Closed


Horizontal airflow


Vertical airflow


Open


Closed


Horizontal airflow


Vertical airflow


Direct the outer air vents toward the side win- dows to defrost.


Direct the outer air vents toward the side win- dows to defrost. Direct the vents into the passenger compart- ment to help maintain the desired temperature in the rear seat.


05


``


197


05 Comfort and driving pleasure


Climate system


Electronic climate control, ECC


05


Temperature control, driver's side


Heated driver's seat1*


Defroster (maximum effect)


Blower


Manual air distribution—floor


Manual air distribution—dashboard air vents Manual air distribution—defroster


Heated rear window and door mirrors, see page 106
Heated front passenger's seat*


Temperature control, passenger's side


Recirculation


AUTO


A/C on/off


Ventilated driver's seat *


Ventilated passenger's seat*


Climate system controls


Ventilated front seats* The ventilation system consists of fans in the seats and backrests that draw air through the seat upholstery. The cooling effect increases as the air in the passenger compartment becomes cooler. The ventilation is controlled by the ECC sys- tem, which takes into account the seat tem- perature, sunlight in the passenger compart- ment, and the ambient temperature.


1 The location of the button varies, depending on whether the vehicle is equipped with the optional ventilated front seats


198


* Option/accessory, for more information, see Introduction.


The ventilation can be used at the same time as seat heating. The ventilation system can be activated when the engine is running. There are three comfort levels that produce different cooling and dehu- midifying effects: • Level three: press the button once for


maximum output – three indicator lights come on.


• Level two: press the button twice for a


lower output – two indicator lights come on.


• Level one: press the button three times for


the lowest output – one indicator light comes on.


• Press the button a fourth time to switch off the function – the indicator light will go out.


05 Comfort and driving pleasure


Climate system


Heated front seats*


Heated rear seats*2


The current seat temperature is shown in the cen- ter console display


Press the button once for the highest heat level – three indi- cator lights come on. Press the button twice for a lower heat level – two indica- tor lights come on.


Press the button three times for the lowest heat level – one indicator light comes on. Press the button four times to switch off the heat – no indicator lights come on. Seat heating will automatically switch off when the engine is switched off.


Heat control for the outboard seating positions is done in the same way as for the front seats.


05


Blower control


Turn the control clockwise to increase or counterclockwise to decrease the blower speed. If AUTO is selected, blower speed will be regula- ted automatically and this will override manual adjustment.


NOTE


If the blower is turned off completely, the air conditioning is disengaged, which may result in fogging on the windows.


2 Not available on models equipped with the optional integrated booster cushions


* Option/accessory, for more information, see Introduction.


199


05 Comfort and driving pleasure


Climate system


Air distribution


05


Manual air distribution—defroster


Manual air distribution—dashboard air vents Manual air distribution—floor


The figure consists of three buttons. When a button is pressed, the corresponding figure will appear in the display with an arrow indicating which manual air flow has been selected (see the following illustration). See also the air dis- tribution chart on page 202.


Air distribution is shown in the center console dis- play


Auto


The function automatically regulates cooling, heating, blower speed, recirculation, and air distribution to main- tain the chosen temperature. If you select one or more man- ual functions, the other func- tions continue to be controlled automatically. The air quality sensor is engaged and all man- ual settings are switched off when AUTO is pressed. The display shows AUTO CLIMATE. Blower speed in automatic mode can be set under Climate settings Automatic blower adjustment. Choose between Low, Normal or High.


200


NOTE


Selecting the lowest blower speed may increases the risk of fog forming on the win- dows.


Temperature control


The temperatures on the driver and passenger sides can be set separately. When the vehicle is started, the most recent setting is resumed.


NOTE


Heating or cooling cannot be speeded up by selecting a higher/lower temperature than the actual temperature required.


05 Comfort and driving pleasure


A/C – ON/OFF


When the indicator light in the button is on, the air condition- ing is controlled automati- cally. This cools/heats and dehumidifies the incoming air. When the indicator light in the button is off, the air condition- ing is disengaged. Other functions are still con- trolled automatically. When maximum defroster is selected, the air conditioning sys- tem is set for maximum blower speed and dehumidification.


Defroster


This function defrosts/de-ices the windshield and front side windows. The indicator light in the defroster button lights when the function is active.


• Blower speed increases automatically and


the air conditioning will switch on (if not already on and if the passenger compart- ment blower is not turned off) to dehumid- ify the air in the passenger compartment. Air conditioning can be switched off by pressing the AC button.


• Recirculation will not function while defrost


is engaged.


The climate system will return to its previous settings when the defroster function is switched off.


Recirculation/air quality system Recirculation


This function can be used to shut out exhaust fumes, smoke, etc., from the passen- ger compartment. The air in the passenger compartment is then recirculated, i.e., no air from outside the car is taken into the car when this function is activated. The indicator light in the button will illuminate when recirculation is selected. If the air in the car recirculates for too long, there is a risk of condensation forming on the insides of the windows, especially in winter. Timer The timer function minimizes the risk of fog- ging, or stale air when the recirculation function is selected by automatically switching off the function after a certain length of time, depend- ing on the ambient temperature. Activate/ deactivate the function under Climate Recirculation timer. See page settings 189 for a description of the menu system.


Climate system


NOTE


When Defroster is selected, recirculation is always deactivated.


Interior Air Quality System–IAQS* This system consists of a multifilter and an air quality sensor. The filter helps remove gases and particles from the incoming air, thereby reducing the amounts of odors and contami- nants entering the vehicle. The air quality sen- sor detects increased levels of contaminants in the outside air. When the air quality sensor detects contaminated outside air, the air intake closes and the air inside the passenger com- partment is recirculated, i.e., no outside air enters the vehicle. The filter also cleans recir- culated passenger compartment air. When the AUTO button is depressed the air quality sen- sor is always engaged. Activate or deactivate this function in Climate settings


Interior air quality system.


05


* Option/accessory, for more information, see Introduction.


201


05 Comfort and driving pleasure


Climate system


NOTE


• The air quality sensor should always be engaged in order to obtain the best air in the passenger compartment.


• Recirculation is limited in cold weather


to avoid fogging.


Air distribution table


• If the insides of the windows start fog- ging, disengage the air quality sensor. Use the defroster function to increase airflow to the front, side, and rear win- dows.


Air distribution


Use


Air distribution


Use


Air to windows. Some air flows from the dashboard air vents. The air is not recirculated. Air condition- ing is always engaged.


To remove de-fog/de- ice the front side win- dows and windshield quickly.


Air to windshield and side windows. Some air flows from the air dashboard vents.


In cold or humid weather (blower speed should be moderate to high).


Air to the floor and windows. Some air flows from the dashboard air vents.


To ensure comfortable conditions and good de- fogging in cold or humid weather.


Air to floor and from dash- board air vents.


In sunny weather with cool outside tempera- tures.


05


202


05 Comfort and driving pleasure


Climate system


Air distribution


Use


Air distribution


Use


Airflow to windows and from dashboard air vents.


To ensure good com- fort in warm, dry weather.


Air to floor. Some air flows to the dashboard air vents and windows.


To warm or cool the feet.


Airflow to the head and chest from the dashboard air vents.


To ensure efficient cooling in warm weather.


Airflow to windows, from dashboard air vents and to the floor.


To cool the feet or pro- vide warmer air to the upper body in cold weather or hot, dry weather.


05


203


05 Comfort and driving pleasure


Trip computer


Introduction


05


Information display and controls


OK–press to acknowledge/confirm/erase a message) Thumb wheel (used to scroll among the trip computer menus) RESET–resets certain functions


To scroll through trip computer information, move the thumb wheel up or down. Continue turning to return to the starting point.


204


Functions


NOTE


Loading...
x