2012 Toyota Sienna Owners Manual

550

SIENNA_U (OM45477U)

3-5. Using the hands-free phone system (for cellular phone)

Listing the registered cellular phones

causes the

Selecting “List Phones” using a voice command or list of registered cellular phones to be read aloud. When listing is complete, the system returns to “Phone Setup”. Pressing the talk switch while the name of a cellular phone is being read selects the cellular phone, and the following functions will be available: • Selecting a cellular phone: “Select Phone” • Changing a registered name: “Change Name” • Deleting a cellular phone: “Delete Phone”

Deleting a cellular phone

STEP 1

Select “Delete Phone” using a voice command or

STEP 2

Select the cellular phone to be deleted by either of the follow- ing methods and select “Confirm” using a voice command or

a. Press the talk switch and say the name of the desired cellu-

lar phone.

b. Press the talk switch and say “List phones”. While the name of the desired cellular phone is being read aloud, press the talk switch.

551

SIENNA_U (OM45477U)

3-5. Using the hands-free phone system (for cellular phone)

Changing the passkey

STEP 1

Select “Set Passkey” using a voice command or

STEP 2

Press the talk switch, say a 4 to 8-digit number, and select

“Confirm” using a voice command or

The number should be input 1 digit at a time. When the entire number to be registered as a passkey has

STEP 3

been input, press

once again.

■ Turning on the automatic connection

Select “Hands-free Power” using a voice command or

Select “Turn on” using a voice command or

■The number of cellular phones that can be registered Up to 6 cellular phones can be registered in the system.

552

SIENNA_U (OM45477U)

3-5. Using the hands-free phone system (for cellular phone) Security and system setup

To enter the menu of each setting, follow the steps below: ■ Security setting items and operation procedure

● Setting or changing the PIN (Personal Identification Number)

1. “Setup” → 2. “Security” → 3. “Set PIN”

● Locking the phone book

1. “Setup” → 2. “Security” → 3. “Phonebook Lock”

● Unlocking the phone book

1. “Setup” → 2. “Security” → 3. “Phonebook Unlock”

■ System setup items and operation procedure

● Setting voice guidance volume

1. “Setup” → 2. “System Setup” → 3. “Guidance Volume”

● Displaying the Bluetooth® device address and name 1. “Setup” → 2. “System Setup” → 3. “Device Name”

● Initialization

1. “Setup” → 2. “System Setup” → 3. “Initialize”

can only be used for system setup operation.

553

SIENNA_U (OM45477U)

3-5. Using the hands-free phone system (for cellular phone)

Setting or changing the PIN

■ Setting a PIN

STEP 1

Select “Set PIN” using a voice command or

STEP 2

Enter a PIN using a voice command or

When using

, input the code 1 digit at a time.

■ Changing the PIN

STEP 1

Select “Set PIN” using a voice command or

STEP 2

Enter the registered PIN using a voice command or

STEP 3

Enter a new PIN using a voice command or

When using

, input the code 1 digit at a time.

554

SIENNA_U (OM45477U)

3-5. Using the hands-free phone system (for cellular phone)

Locking or unlocking the phone book

STEP 1

Select “Phonebook Lock (Phbk Lock)” or “Phonebook unlock

(Phbk Unlock)” using a voice command or

STEP 2

Input the PIN by either of the following methods and select

“Confirm” using a voice command or

a. Press the talk switch and say the registered PIN.

b. Input a registered PIN using

Setting voice guidance volume

STEP 1

Select “Guidance Volume” using

STEP 2

Change the voice guidance volume.

To decrease the volume: Turn

counterclockwise.

To increase the volume: Turn

clockwise.

555

SIENNA_U (OM45477U)

3-5. Using the hands-free phone system (for cellular phone)

Displaying the Bluetooth® device address and name

STEP 1

Select “Device Name” using

STEP 2

Turn name.

to display the Bluetooth® device address and

STEP 3

Select “Go Back” using

to return to “System Setup”.

Initialization

STEP 1

Select “Initialize” and then “Confirm” using

STEP 2

Select “Confirm” using

556

SIENNA_U (OM45477U)

3-5. Using the hands-free phone system (for cellular phone)

■Initialization

●The following data in the system can be initialized:

• Phone book • Outgoing and incoming call history • Speed dials • Registered cellular phone data • Security code

●Once the initialization has been completed, the data cannot be restored

to its original state.

■When the phone book is locked

The following functions cannot be used: ●Dialing by inputting a name ●Speed dialing ●Dialing a number stored in the call history memory ●Using the phone book

557

SIENNA_U (OM45477U)

3-5. Using the hands-free phone system (for cellular phone) Using the phone book

To enter the menu of each setting, follow the steps below:

● Adding a new phone number

1. “Phonebook” → 2. “Add Entry”

● Setting speed dial

1. “Phonebook” → 2. “Set Speed Dial (Speed Dial)”

● Changing a registered name

1. “Phonebook” → 2. “Change Name”

● Deleting registered data

1. “Phonebook” → 2. “Delete Entry”

● Deleting speed dial

1. “Phonebook” → 2. “Delete Speed Dial (Del Spd Dial)”

● Listing the registered data

1. “Phonebook” → 2. “List Names”

Adding a new phone number

The following methods can be used to add a new phone number: ● Inputting a phone number using a voice command ● Transferring data from the cellular phone

● Inputting a phone number using

● Selecting a phone number from outgoing or incoming call history

558

SIENNA_U (OM45477U)

3-5. Using the hands-free phone system (for cellular phone)

■ Adding procedure

STEP 1

Select “Add Entry” using a voice command or

STEP 2

Use one of the following methods to input a phone number:

Inputting a phone number using a voice command

STEP2-1: Select “By Voice” using a voice command or

STEP2-2: Press the talk switch, say the desired number, and

select “Confirm” using a voice command.

Transferring data from the cellular phone

STEP2-1: Select “By Phone” and then “Confirm” using a voice

command or

STEP2-2: Transfer the data from the cellular phone.

Refer to the manual that comes with the cellular phone for the details of transferring data.

STEP2-3: Select the data to be registered by either of the fol-

lowing methods: a. Say “Previous” or “Next” until the desired data is displayed, and select “Confirm” using a voice command.

b. Select the desired data using

559

SIENNA_U (OM45477U)

3-5. Using the hands-free phone system (for cellular phone)

Inputting a phone number using

STEP2-1: Select “Manual Input” using

STEP2-2: Input a phone number using

, and press

once again.

Input the phone number 1 digit at a time.

Selecting a phone number from outgoing or incoming call his- tory

STEP2-1: Select “Call History” using a voice command or

STEP2-2: Select “Outgoing” or “Incoming” using a voice com-

mand or

STEP2-3: Select the data to be registered by either of the fol-

lowing methods: a. Say “Previous” or “Go back” until the desired data is displayed, and select “Confirm” using a voice command.

b. Select the desired data using

560

SIENNA_U (OM45477U)

3-5. Using the hands-free phone system (for cellular phone)

STEP 3

Select the name to be registered by either of the following methods, and select “Confirm” using a voice command or

a. Press the talk switch and say the desired name.

b. Select “Record Name” using

, and say the desired

name.

STEP 4

Select “Confirm” using a voice command or

STEP 4

In firm” registers the newly added phone number as a speed dial.

, selecting “Set Speed Dial (Speed Dial)” instead of “Con-

561

SIENNA_U (OM45477U)

3-5. Using the hands-free phone system (for cellular phone)

Setting speed dials

STEP 1

Select “Set Speed Dial (Speed Dial)” using a voice command

or

STEP 2

Select the data to be registered as a speed dial by one of the following methods: a. Press the talk switch, say desired name, and select “Con-

firm” using a voice command or

b. Press the talk switch, and say “List names”. While the desired name is being read aloud, press the talk switch,

and select “Confirm” using a voice command or

c. Select the desired data using

STEP 3

Select the desired preset button, and register the data into speed dial by either of the following methods: a. Press the desired preset button, and select “Confirm” using

a voice command or

b. Press and hold the desired preset button.

562

SIENNA_U (OM45477U)

3-5. Using the hands-free phone system (for cellular phone)

Changing a registered name

STEP 1

Select “Change Name” using a voice command or

STEP 2

Select the name to be changed by one of the following meth- ods. a. Press the talk switch, say desired name, and select “Con-

firm” using a voice command or

b. Press the talk switch, and say “List names”. While the desired name is being read aloud, press the talk switch,

and select “Confirm” using a voice command or

c. Select the desired name using

STEP 3

Press the talk switch or select “Record Name” using and say a new name.

STEP 4

Select “Confirm” using a voice command or

563

SIENNA_U (OM45477U)

3-5. Using the hands-free phone system (for cellular phone)

Deleting registered data

STEP 1

Select “Delete Entry” using a voice command or

STEP 2

Select the data to be deleted by either of the following meth-

ods, and select “Confirm” using a voice command or

a. Press the talk switch, and say the name of the desired

phone number to be deleted.

b. Press the talk switch, say “List Names”. While the name of the desired phone number is being read aloud, press the talk switch.

c. Select the desired data using

Deleting speed dials

STEP 1

Select “Delete Speed Dial (Del Spd Dial)” using a voice com-

mand or

STEP 2

Press the preset button in which the desired speed dial is reg- istered, and select “Confirm” using a voice command or

564

SIENNA_U (OM45477U)

3-5. Using the hands-free phone system (for cellular phone)

Listing the registered data

Selecting “List names” using a voice command causes a list of the registered data to be read aloud. When listing is complete, the system returns to “Phonebook”. Pressing the talk switch while the desired data is being read aloud selects the data, and the following functions will be available. • Dialing: “Dial” • Changing a registered name: “Change Name” • Deleting an entry: “Delete Entry” • Setting a speed dial: “Set Speed Dial (Speed Dial)”

■Limitation of number of digits

A phone number that exceeds 24 digits cannot be registered.

565

SIENNA_U (OM45477U)

3-6. Using the interior lights Interior lights list

Outer foot lights (if equipped) Rear interior light Rear personal/interior lights (→P. 569) Rear ceiling lights (if equipped) (→P. 570) Front personal/interior lights (→P. 568) Engine switch light (if equipped) Front door courtesy lights (if equipped)

566

SIENNA_U (OM45477U)

3-6. Using the interior lights

Personal/interior light main switch

Personal/interior light main switch (vehicles with overhead console)

Type A

Type B

On

to activate the inte-

Push rior lights. The personal/interior lights can- not be individually turned off with this switch. Door position When door mode is active it will be indicated by a green light on the button. In door mode, interior lights will turn on when a door is opened. The personal/interior lights cannot be individually turned off with this switch.

567

SIENNA_U (OM45477U)

3-6. Using the interior lights

Personal/interior lights

Personal/interior lights (vehicles with overhead console) Front type A

On/off

Front type B

568

SIENNA_U (OM45477U)

Rear

3-6. Using the interior lights

Personal/interior lights

On/off

Rear personal/interior lights turn on when the personal/interior main switch is in door position. Personal/interior lights can also be turned on/off from each indi- vidual light. When an individual light is activated it must be turned off at its location. It will not turn off immediately once the doors are closed. To conserve your battery any interior lights left on will turn off 20 minutes after engine off. These lights will come back on with engine on.

569

SIENNA_U (OM45477U)

3-6. Using the interior lights

Personal lights and rear ceiling lights

Personal lights (vehicles without overhead console)

Front

Rear

Rear ceiling lights (if equipped)

On/off

On/off

On/off

570

SIENNA_U (OM45477U)

3-6. Using the interior lights

■Adjusting the rear personal/interior lights angle

Push the edge of the light lens.

■Illuminated entry system (if equipped) Vehicles without a smart key system The lights automatically turn on/off according to the engine switch position, whether the doors are locked/ unlocked, and whether the doors are open/ closed. Vehicles with a smart key system The lights automatically turn on/off according to “ENGINE START STOP” switch mode, the presence of the electronic key, whether the doors are locked/unlocked, and whether the doors are open/closed.

■To prevent battery discharge

If the lights remain on when a door is not fully closed and the personal/inte- rior light main switch is in door position, the lights will go off automatically after 30 seconds.

■Customization that can be configured at Toyota dealer

Settings (e.g. the time elapsed before lights turn off) can be changed. (Customizable features →P. 815)

NOTICE

■Rear ceiling lights (if equipped)

Do not hang anything on the gap between the ceiling light cover and the ceil- ing or pull the ceiling light cover strongly. Doing so may cause damage.

571

SIENNA_U (OM45477U)

3-7. Using the storage features List of storage features

Auxiliary boxes Cup holders Door pockets Bottle holders Overhead console (if equipped) Glove boxes Console box (if equipped)

572

SIENNA_U (OM45477U)

3-7. Using the storage features

Glove boxes

CAUTION

■Items that should not be left in the storage spaces

Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: ●Glasses may be deformed by heat or cracked if they come into contact

with other stored items.

●Lighters or spray cans may explode. If they come into contact with other stored items, the lighter may catch fire or the spray can may release gas, causing a fire hazard.

Glove boxes

Upper glove box

Push the button.

573

SIENNA_U (OM45477U)

3-7. Using the storage features

Glove boxes

Lower glove box The lower glove box can be opened by pulling the lever and can be locked and unlocked by using the master key (vehicles without a smart key) or the mechanical key (vehicles with a smart key system).

Unlock Lock Open

■Removing the separate tray (upper glove box)

Pull out the separate tray.

CAUTION

■Caution while driving

Keep the glove box closed when not in use. In the event of sudden braking or sudden swerving, an accident may occur due to an occupant being struck by the open glove box or the items stored inside.

574

SIENNA_U (OM45477U)

3-7. Using the storage features

Console box

Console box (if equipped)

■ Using the console box Type A

Press the tab.

Type B

Press the tab.

575

SIENNA_U (OM45477U)

3-7. Using the storage features

Console box

■Sliding the console box (type B)

From front

Press the tab and slide the console box.

From rear

Pull up the lever and slide the console box.

■Console box light

The console box light turns on when the headlight switch is on.

576

SIENNA_U (OM45477U)

3-7. Using the storage features

Console box

CAUTION

■Caution while driving

Keep the console box closed when not in use. In the event of sudden brak- ing or sudden swerving, an accident may occur due to an occupant being struck by the open console box or the items stored inside.

■Console box adjustment precaution (type B)

●Do not adjust the position of the console box while the vehicle is moving. This may cause the driver to mishandle the vehicle and may lead to an accident that results in death or serious injury.

●Be careful not to get hands or feet pinched between the console box and

the rear sliding console or rear seat.

●Be careful not to allow the console box to hit any passenger while adjust-

ing its position.

●After adjusting the console box, make sure it is securely locked in position.

577

SIENNA_U (OM45477U)

3-7. Using the storage features

Overhead console (if equipped)

Overhead console

Push the lid.

The overhead console is useful for temporarily storing small items.

CAUTION

■While driving

Do not leave the overhead console open. Items may fall out and cause injury.

■Maximum storage weight

Do not place any object heavier than 0.4 lb. (200 g) in it. The console may be opened and cause injury.

578

SIENNA_U (OM45477U)

Cup holders

Front

3-7. Using the storage features

Cup holders

Press in and release the front cup holder.

Console box (if equipped)

Console box type A (if equipped)

Pull the lid down.

579

SIENNA_U (OM45477U)

3-7. Using the storage features

Console box type B (if equipped)

Cup holders

Second center seat (if equipped)

Removing seat. (→P. 106)

the second center

Rear

580

SIENNA_U (OM45477U)

3-7. Using the storage features

Cup holders

■Removing the separator (front)

Pull the separator up. The separator may be removed for clean- ing.

■Cup holder light (console box type A and B)

The cup holder light turns on when the headlight switch is on.

CAUTION

■Items unsuitable for the cup holder

Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury. If possible, cover hot drinks to prevent burns.

■When not in use (front and console box type A)

Keep the cup holders closed. In the event of sudden braking or sudden swerving, an accident may occur due to an occupant being struck by the open cup holders or the items stored inside.

581

SIENNA_U (OM45477U)

Bottle holders

3-7. Using the storage features

Bottle holders

Type A

Type B

582

SIENNA_U (OM45477U)

3-7. Using the storage features

Bottle holders

CAUTION

■Items unsuitable for the bottle holder

Do not place anything other than a bottle in the bottle holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury.

NOTICE

■When stowing a bottle

Put the cap on before stowing a bottle. Do not place open bottles in the bot- tle holders. The contents may spill. Type B: Make sure items in the sliding door bottle holder will not interfere with the motion of the door before operating the door. Items that protrude from the bottle holder may prevent door opening or damage the vehicle.

583

SIENNA_U (OM45477U)

Door pockets

Make sure magazines are not bent or protruding from the sliding door pockets. Do not insert anything too big so that the shape of the sliding door pockets is dis- torted. Such objects may obstruct the opening/closing of the sliding doors, dam- age the sliding door pockets or the vehi- cle body, and may result in a malfunction.

3-7. Using the storage features

Door pockets

Type A

Type B

NOTICE

■Door pockets (type B)

584

SIENNA_U (OM45477U)

3-7. Using the storage features

Auxiliary boxes

Auxiliary boxes

Type A

Push down the knob.

Type B (if equipped)

Type C

SIENNA_U (OM45477U)

585

3-7. Using the storage features

Type D (if equipped)

Auxiliary boxes

Type E (if equipped)

Type F

Lift the lid.

586

SIENNA_U (OM45477U)

Type G

3-7. Using the storage features

Auxiliary boxes

Removing seat. (→P. 106)

the second center

Type H (if equipped)

ITN37N026

Type I (if equipped)

ITN37N027

SIENNA_U (OM45477U)

587

3-7. Using the storage features

Type J (if equipped)

Auxiliary boxes

Type K (if equipped)

588

SIENNA_U (OM45477U)

3-7. Using the storage features

Auxiliary boxes

■Coin holder (type A)

Nickels, quarters and dimes can be stored separately.

CAUTION

■Caution while driving (type A and F)

Keep the auxiliary boxes closed. Injuries may result in the event of an accident or sudden braking.

589

SIENNA_U (OM45477U)

3-8. Other interior features Sun visors

To set the visor in the for- ward position, flip it down. To set the visor in the side position, flip down, unhook, and swing it to the side. To use the side extender, place the visor in the side position, then slide it back- ward.

590

SIENNA_U (OM45477U)

3-8. Other interior features Vanity mirrors

Flip down. Open the cover. The light turns on when the cover is opened.

NOTICE

■To prevent battery discharge

Do not leave the vanity lights on for extended periods while the engine is off.

591

SIENNA_U (OM45477U)

3-8. Other interior features Clock∗

Adjusts the hours. Adjusts the minutes.

■The clock is displayed when

Vehicles without a smart key system The engine switch is in the “ACC” or “ON” position. Vehicles with a smart key system The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.

■When disconnecting and reconnecting battery terminals

The time display will automatically be set to 1:00.

∗: If equipped

592

SIENNA_U (OM45477U)

3-8. Other interior features Conversation mirror∗

The conversation mirror can provide the driver and the front passen- ger with a view of the rear seat area without the need to turn around.

STEP 1

STEP 2

Push the lid and allow the lid to open.

Push the lid. To first locked position.

∗: If equipped 593

SIENNA_U (OM45477U)

3-8. Other interior features Power outlets

The power outlet can be used for the following components:

12 V: Accessories that run on less than 10 A 120 V AC: Accessories that use less than 100 W

■ 12 V Center panel type A

Center panel type B

594

SIENNA_U (OM45477U)

3-8. Other interior features

Luggage compartment

■ 120 V AC (if equipped) Power outlet socket console box type A

Power outlet socket console box type B

SIENNA_U (OM45477U)

595

3-8. Other interior features

Power outlet socket luggage compartment

■The power outlet can be used when Vehicles without a smart key system 12 V: The engine switch is in the “ACC” or “ON” position. 120 V AC: The engine switch is in the “ON” position. Vehicles with a smart key system 12 V: The “ENGINE START STOP” switch is in ACCESSORY or IGNITION

ON mode.

120 V AC: The “ENGINE START STOP” switch is in IGNITION ON mode.

596

SIENNA_U (OM45477U)

3-8. Other interior features

NOTICE

■To avoid damaging the power outlet

Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short cir- cuit.

■To prevent blown fuse

12 V Do not use an accessory that uses more than 12 V 10 A. 120 V AC Do not use a 120 V AC appliance that requires more than 100 W. If a 120 V AC appliance that consumes more than 100 W is used, the protec- tion circuit may cut the power supply.

■To prevent battery discharge

Do not use the power outlet longer than necessary when the engine is not running.

■Appliances that may not operate properly (120 V AC)

The following 120 V AC appliances may not operate properly even if their power consumption is under 100 W: ●Appliances with high initial peak wattage ●Measuring devices that process precise data ●Other appliances that require an extremely stable power supply

597

SIENNA_U (OM45477U)

3-8. Other interior features Seat heaters∗

For driver’s seat For front passenger’s seat On The indicator light comes on. Adjusts the seat tempera- ture The further you move the dial upward, the warmer the seat becomes.

■The seat heaters can be used when

Vehicles without a smart key system The engine switch is in the “ON” position. Vehicles with a smart key system The “ENGINE START STOP” switch is in IGNITION ON mode.

■When not in use

Move the dial fully downward. The indicator light turns off.

∗: If equipped

598

SIENNA_U (OM45477U)

3-8. Other interior features

CAUTION

■Burns

●Use caution when seating the following persons in a seat with the seat

heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the physically chal-

lenged

• Persons with sensitive skin • Persons who are fatigued • Persons who have taken alcohol or drugs that induce sleep (sleeping

drugs, cold remedies, etc.)

●Do not cover the seat with anything when using the seat heater.

Using the seat heater with a blanket or cushion increases the temperature of the seat and may lead to overheating.

●Do not use the seat heater more than necessary. Doing so may cause

minor burns or overheating.

NOTICE

■To prevent seat heater damage

Do not put heavy objects that have an uneven surface on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.

■To prevent battery discharge

Turn the seat heaters off when the engine is not running.

599

SIENNA_U (OM45477U)

3-8. Other interior features Armrests

Front seat

Pull the armrest down for use.

Second seat (if equipped)

Pull the armrest down for use.

600

SIENNA_U (OM45477U)

3-8. Other interior features

■Adjusting the armrests (if equipped)

Push the armrest down while pressing the button.

NOTICE

■To prevent damage to the armrest

Do not place too much strain on the armrest.

SIENNA_U (OM45477U)

601

3-8. Other interior features Rear side sunshades∗

Rear door window

Rear quarter window

Pull the tab up. Secure the sunshade using the hooks. To retract the sunshade, pull the tab up slightly to unhook the sunshade, and lower the sunshade slowly.

Pull the tab up. Secure the sunshade using the hooks. To retract the sunshade, pull the tab up slightly to unhook the sunshade, and lower the sunshade slowly.

NOTICE

■To ensure normal operation of the sunshade

Observe the following precautions. ●Do not place anything where it may hinder the opening/closing of the sun-

shade.

●Do not place anything on the sunshade.

∗: If equipped

602

SIENNA_U (OM45477U)

3-8. Other interior features Grocery bag hooks

The hooks are designed to hang things like a grocery bag. Type A (front seatback) (if equipped)

Type B (third seatback)

Type C (luggage compartment)

Pull the hook up.

603

SIENNA_U (OM45477U)

3-8. Other interior features

Type D (luggage compartment)

ITN38N036

CAUTION

■When not in use (type C)

Keep the grocery bag hook stowed. Injuries may result in the event of sudden braking, sudden swerving or an accident.

NOTICE

■Grocery bag hook weight capacity (type A and B)

Do not hang any object heavier than 8.8 lb. (4 kg) on the grocery bag hook.

604

SIENNA_U (OM45477U)

3-8. Other interior features Floor mat

Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet.

Fix the floor mat in place using the retaining hooks (clips) pro- vided.

The shape of the retaining hooks (clips) and the fixing procedure of the floor mat for your vehicle may differ from those shown in the illustration. For details, refer to the floor mat retention clip installation instructions supplied with the clips.

CAUTION

Observe the following precautions. Failure to do so may cause the driver’s floor mat to slip, possibly interfering with the pedals while driving. An unexpectedly high speed may result or it may become difficult to stop the vehicle, leading to a serious accident. ■When installing the driver’s floor mat

●Do not use floor mats designed for other models or different model year

vehicles, even if they are Toyota Genuine floor mats.

●Only use floor mats designed for the driver’s seat. ●Always install the floor mat securely using the retaining hooks (clips) pro-

vided.

●Do not use two or more floor mats on top of each other. ●Do not place the floor mat bottom-side up or upside-down.

605

SIENNA_U (OM45477U)

3-8. Other interior features

CAUTION

■Before driving

●Check that the floor mat is securely fixed in the correct place with all the provided retaining hooks (clips). Be especially careful to perform this check after cleaning the floor.

●With the engine stopped and the shift lever in P, fully depress each pedal to the floor to make sure it does not inter- fere with the floor mat.

606

SIENNA_U (OM45477U)

3-8. Other interior features Luggage compartment features

■ Cargo hooks

Cargo hooks are provided for securing loose items.

■ Cargo net hooks Pattern 1

Pattern 2

SIENNA_U (OM45477U)

607

3-8. Other interior features

■ Storage box (if equipped)

Engage the latch buckle.

CAUTION

■When the cargo hooks are not in use

To avoid injury, always return the cargo hooks to their positions when they are not in use.

NOTICE

■To prevent damage to the cargo net hooks

Avoid hanging things other than a cargo net on them.

608

SIENNA_U (OM45477U)

3-8. Other interior features Garage door opener∗

The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, secu- rity systems, and other devices.

The garage door opener (HomeLink® Universal Transceiver) is manufac- tured under license from HomeLink®.

Programming the HomeLink® (for U.S.A. owners)

The HomeLink® compatible transceiver in your vehicle has 3 buttons which can be programmed to operate 3 different devices. Refer to the programming method below appropriate for the device.

Indicator light Buttons

∗: If equipped 609

SIENNA_U (OM45477U)

3-8. Other interior features

■ Programming the HomeLink® STEP 1

STEP 2

Point the remote control for the device 1 to 3 in. (25 to 75 mm) from the HomeLink® control but- tons.

Keep the indicator light on the HomeLink® in view while pro- gramming.

the Press and hold one of HomeLink® buttons and the the transmitter button. When HomeLink® light changes from a slow to a rapid flash, you can release both but- tons.

indicator

If the HomeLink® indicator light comes on but does not flash, or flashes rapidly for 2 seconds and remains lit, the HomeLink® button is already programmed. Use the other buttons or the “Reprogramming a HomeLink® button” instructions. (→P. 614)

follow