Download PDF Manual

The audio system can be turned off by holding the switch down until you hear a beep.


Changing the audio source


Press when the audio system is turned on. The audio source changes as follows each time the button is pressed. If a mode cannot be used, it will be skipped. Type A: FM (1, 2) → CD player → AUX → AM → SAT (1, 2, 3) Type B and C: FM → SAT → CD player (type B) or CD changer (type C) → RSE* → Bluetooth® audio → AUX → iPod or USB memory → AM *: If equipped


Adjusting the volume


Press “+” on volume.


to increase the volume and “-” to decrease the


Hold down the button to continue increasing or decreasing the volume.


464


SIENNA_U (OM45477U)


3-2. Using the audio system


Selecting a radio station


STEP 1


Press


to select the radio mode.


STEP 2


Press “∧” or “∨” on


to select a radio station.


To scan for receivable stations, press and hold the switch until you hear a beep.


Selecting a track/file or song


STEP 1


Press USB memory mode.


to select CD, RSE, Bluetooth® audio, iPod or


STEP 2


Press “∧” or “∨” on song.


Selecting an album


to select the desired track/file or


STEP 1


Press


to select Bluetooth® audio mode.


STEP 2


Press and hold “∧” or “∨” on


until you hear a beep.


Selecting a folder


STEP 1


Press


to select USB memory mode.


STEP 2


Press and hold “∧” or “∨” on


until you hear a beep.


465


SIENNA_U (OM45477U)


3-2. Using the audio system


Selecting a disc in the CD changer (type C only)


STEP 1


Press


to select the CD mode.


STEP 2


Press and hold “∧” or “∨” on


until you hear a beep.


Selecting a track/file or chapter (vehicles with rear seat entertainment system)


STEP 1


Press


to select the RSE mode.


STEP 2


Press “∧” or “∨” on chapter.


to select the desired track/file or


■Canceling automatic selection of a radio station


Press


again.


CAUTION


■To reduce the risk of an accident


Exercise care when operating the audio switches on the steering wheel.


466


SIENNA_U (OM45477U)


3-2. Using the audio system Detachable pole antenna∗


The antenna can be removed. ■ Removing the antenna STEP 1


the


Place around the antenna.


included wrench


When not in use, the wrench is stored in glove box.


STEP 2


Loosen the antenna with the wrench and remove it.


∗: If equipped 467


SIENNA_U (OM45477U)


3-2. Using the audio system


■ Installing the antenna STEP 1


STEP 2


Tighten the antenna by one hand until it will not turn any more.


Using the wrench, tighten the antenna an additional 1/8th turn (20 to 45 degrees) to secure it in place.


After tightening the antenna, remove the wrench.


■About the wrench


After using the included wrench, store it in the glove box for safekeeping.


468


SIENNA_U (OM45477U)


3-2. Using the audio system


NOTICE


■To avoid damaging the antenna


Remove the antenna in the following situations. ●When using an automatic carwash. ●When the antenna will touch the ceiling of a garage, etc. ●When covering the vehicle with a car cover.


■Removing the antenna


●For normal driving, make sure the antenna is installed. ●When removing the antenna to use an automatic carwash, etc., be careful not to lose the antenna. Also, make sure to reinstall the antenna before driving the vehicle.


■Using the wrench


●When installing or removing the antenna, use the included wrench. ●Be careful not to scratch or damage the vehicle body with the wrench. ●Do not over-tighten the antenna.


Over-tightening may damage the antenna.


●Do not use any tools other than the included wrench to install or remove


the antenna. Otherwise damage may result on the antenna’s finish.


469


SIENNA_U (OM45477U)


3-3. Using the Bluetooth® audio system Bluetooth® audio system∗


The Bluetooth® audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehicle speakers via wireless communication. This audio system supports Bluetooth®, a wireless data system capable of playing portable audio music without cables. If your por- table player does not support Bluetooth®, the Bluetooth® audio sys- tem will not function. Vehicles with a navigation system


Owners of models equipped with a navigation system should refer to the “NAVIGATION SYSTEM OWNER’S MANUAL”.


Vehicles without a navigation system


Title


Using the Bluetooth® audio system Operating a Bluetooth® enabled portable player Setting up a Bluetooth® enabled portable player Bluetooth® audio system setup


Page P. 474
P. 480
P. 482
P. 487


∗: If equipped


470


SIENNA_U (OM45477U)


3-3. Using the Bluetooth® audio system


■Conditions under which the system will not operate


●If using a portable player that does not support Bluetooth® ●If the portable player is switched off ●If the portable player is not connected ●If the portable player’s battery is low ●If the portable player is behind the seat or in the glove box or console box ●If metal is covering or touching the portable player


■When transferring ownership of the vehicle


Be sure to initialize the system to prevent personal data from being improp- erly accessed. (→P. 557)


■About Bluetooth®


Bluetooth is a registered trademark of Bluetooth SIG. Inc.


471


SIENNA_U (OM45477U)


3-3. Using the Bluetooth® audio system


■Compatible models


●Bluetooth® specifications:


Ver. 1.2, or higher (Recommended: Ver. 2.0+EDR or higher)


●Following Profiles:


• A2DP (Advanced Audio Distribution Profile) Ver. 1.0 or higher • AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Ver. 1.3 or higher recommended)


Portable players must correspond to the above specifications in order to be connected to the Bluetooth® audio system. However, please note that some functions may be limited depending on the type of portable player.


■Certification for the Bluetooth® audio system


FCC ID: AJDK025 IC ID: 775E-K025
MADE IN THAILAND This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired oper- ation.


472


SIENNA_U (OM45477U)


3-3. Using the Bluetooth® audio system


CAUTION


■FCC WARNING


Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC/ IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply with- out maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 7.9 in. (20 cm) and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles). This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.


■While driving


Do not connect portable players or operate the controls.


NOTICE


■To prevent damage to portable players


Do not leave portable players in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the player.


473


SIENNA_U (OM45477U)


3-3. Using the Bluetooth® audio system Using the Bluetooth® audio system


■ Audio unit


Display A message, name, number, etc. is displayed. Lower-case characters and special characters cannot be displayed.


Selects items such as menu and number Turn: Selects an item Press: Inputs the selected item Bluetooth® connection con- dition


If “BT” is not displayed, the Bluetooth® audio sys- tem cannot be used.


■ Microphone


474


SIENNA_U (OM45477U)


3-3. Using the Bluetooth® audio system


Operating the system using voice commands


By following voice guidance instructions output from the speaker, voice commands enable to the operation of the Bluetooth® audio sys-


tem without the need to check the display or operate


■ Operation procedure when using voice commands


Press the talk switch and follow voice guidance instructions.


■ Auxiliary commands when using voice commands


The following auxiliary commands can be used when operating the system using a voice command: Cancel: Exits the Bluetooth® audio system Repeat: Repeats the previous voice guidance instruction Go back: Returns to the previous procedure Help: Reads aloud the function summary if a help comment is registered for the selected function


475


SIENNA_U (OM45477U)


3-3. Using the Bluetooth® audio system


Using the Bluetooth® audio system for the first time


Before using the Bluetooth® audio system, it is necessary to register a Bluetooth® enabled portable player in the system. Follow the proce- dure below to register (pair) a portable player:


STEP 1


Press


until “BT AUDIO” is displayed.


STEP 2


Press


that corresponds to “SETUP”.


The introductory guidance and portable player name registration instructions are heard.


STEP 3


Select “Pair Audio Player (Pair Audio)” using a voice com-


mand or


STEP 4


Register a portable player name by either of the following methods:


a. Select “Record Name” using


, and say the name to


be registered.


b. Press the talk switch and say the name to be registered.


A voice guidance instruction to confirm the input is heard.


476


SIENNA_U (OM45477U)


3-3. Using the Bluetooth® audio system


STEP 5


Select “Confirm” using a voice command or


A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the portable player is heard. STEP 6


Input the passkey into the portable player. Refer to the manual that comes with the portable player for the oper- ation of the portable player.


Guidance for registration completion is heard. If the portable player has a Bluetooth® phone, the phone can be reg- istered at the same time. (→P. 537)


477


SIENNA_U (OM45477U)


3-3. Using the Bluetooth® audio system


Menu list of the Bluetooth® audio system


■ Normal operation


First menu


Second menu


“BT•A Setup”


“Setup”


“System Setup”*


Third menu


Operation detail


“Pair Audio Player” “Select Audio Player”


“Change Name”


“List Audio Play- ers” “Set Passkey”


“Delete Audio”


“Guidance Vol- ume”


“Device Name”


“Initialize”


Registering a portable player


Selecting a portable player to be used Changing the registered name of a portable player Listing the registered porta- ble players Changing the passkey Deleting a registered porta- ble player Setting voice guidance vol- ume Displaying the Bluetooth® device address and name Initializing the system


“BT•A Setup” can be canceled by pressing the on-hook switch or saying the voice command, “Cancel”. *: Selection of system set-up is possible only by the operation of


the steering wheel switch.


478


SIENNA_U (OM45477U)


3-3. Using the Bluetooth® audio system


■When using a voice command


For numbers, say a combination of single digits from zero to nine. Say the command correctly and clearly.


■Situations in which the system may not recognize your voice


●When driving on rough roads ●When driving at high speeds ●When air is blowing out of the vents onto the microphone ●When the air conditioning fan emits a loud noise


■Operations that cannot be performed while driving


●Operating the system with


●Registering a portable player to the system


■Changing the passkey


→P. 485


479


SIENNA_U (OM45477U)


3-3. Using the Bluetooth® audio system Operating a Bluetooth® enabled portable player


Power


Volume


Selecting a track/ fast-forwarding and reversing


Selecting an album


Selector buttons


Playback/pause


Displaying text messages


Playback


Selecting an album


Press “∧” or “∨” on


Selecting tracks


Press “∧” or “∨” on


to select the desired track.


480


SIENNA_U (OM45477U)


3-3. Using the Bluetooth® audio system


Playing and pausing tracks


Press


Fast-forwarding and rewinding tracks


Press and hold “∧” or “∨” on


Switching the display


Press


Each time the button is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time


Using the steering wheel audio switches


→P. 463


■Bluetooth® audio system functions


Depending on the portable player that is connected to the system, certain functions may not be available.


481


SIENNA_U (OM45477U)


3-3. Using the Bluetooth® audio system Setting up a Bluetooth® enabled portable player


Registering a portable player in the Bluetooth® audio system allows the system to function. The following functions can be used for reg- istered portable players: ■ Functions and operation procedures


STEP 1


Press


until “BT AUDIO” is displayed.


STEP 2


STEP 3


that corresponds to “SETUP”


Press Select one of the following functions using a voice com-


mand or


● Registering a portable player


“Pair Audio Player”


● Selecting a portable player to be used


“Select Audio Player”


● Changing the registered name


“Change Name”


● Listing the registered portable players


“List Audio Players”


● Changing the passkey


“Set Passkey”


● Deleting a registered portable player


“Delete Audio Player”


482


SIENNA_U (OM45477U)


3-3. Using the Bluetooth® audio system


Registering a portable player


Select “Pair Audio Player” using a voice command or perform the procedure for registering a portable player. (→P. 476)


, and


Selecting a portable player to be used


STEP 1


Select “Select Audio Player” using a voice command or


STEP 2


Select the portable player to be used by either of the following methods, and select “Confirm” by using a voice command or


a. Press the talk switch and say the name of the desired por-


table player.


b. Press the talk switch and say “List Audio Players”. When the name of the desired portable player is read aloud, press the talk switch.


STEP 3


Press the talk switch and say “From Car” or “From Audio”, and


select “Confirm” by using a voice command or


483


SIENNA_U (OM45477U)


3-3. Using the Bluetooth® audio system


Vehicles without a smart key system When the portable player is on standby for the connection, it will be automatically connected whenever the engine switch is in either “ACC” or “ON” position. If a portable player that has already been paired is selected, it is nec- essary to select “From Car” or “From audio” setting. Vehicles with a smart key system When the portable player is on standby for the connection, it will be automatically connected whenever the “ENGINE START STOP” switch is in either ACCESSORY or IGNITION ON position. If a portable player that has already been paired is selected, it is nec- essary to select “From Car” or “From audio” setting.


Changing the registered name of a portable player


STEP 1


Select “Change Name” using a voice command or


STEP 2


Select the name of the portable player to be changed by either of the following methods, and select “Confirm” using a


voice command or


a. Press the talk switch and say the name of the desired por-


table player.


b. Press the talk switch and say “List Audio Players”. When the name of the desired portable player is read aloud, press the talk switch.


STEP 3


Press the talk switch or select “Record Name” using and say the new name.


STEP 4


Select “Confirm” using a voice command or


484


SIENNA_U (OM45477U)


3-3. Using the Bluetooth® audio system


Listing the registered portable players


. The list


Select “List Audio Players” using a voice command or of registered portable players will be read aloud. When listing is complete, the system returns to “BT•A Setup”. Pressing the talk switch while the name of a portable player is being read aloud selects the portable player, and the following functions will become available: ● Selecting a portable player: “Select Audio Player” ● Changing a registered name: “Change Name” ● Deleting a portable player: “Delete Audio Player”


Changing the passkey


STEP 1


Select “Set Passkey” using a voice command or


STEP 2


Press the talk switch, say a 4 to 8-digit number, and select


“Confirm” using a voice command or


STEP 3


When the entire number to be registered as a passkey has


been input, press


again.


If the number to be registered has 8 digits, pressing of the knob is not necessary.


485


SIENNA_U (OM45477U)


3-3. Using the Bluetooth® audio system


Deleting a registered portable player


STEP 1


Select “Delete Audio Player” using a voice command or


STEP 2


Select the portable player to be deleted by either of the follow- ing methods and select “Confirm” using a voice command or


a. Press the talk switch and say the name of the desired por-


table player.


b. Press the talk switch and say “List Audio Players”. When the name of the desired portable player is read aloud, press the talk switch.


If the portable player to be deleted is paired as a Bluetooth® phone, the registration of the mobile phone can be deleted at the same time. A voice guidance instruction to delete a mobile phone is heard.


STEP 3


Select “Confirm” by using a voice command or


■The number of portable players that can be registered Up to 2 portable players can be registered in the system.


486


SIENNA_U (OM45477U)


3-3. Using the Bluetooth® audio system Bluetooth® audio system setup


■ System setup items and operation procedures


→P. 553


487


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) features∗


The hands-free system is a function that allows you to use your cel- lular phone without touching it. This system supports Bluetooth®, which allows you to make or receive calls without using cables to connect a cellular phone to the system, and without operating the cellular phone. With navigation system Owners of models equipped with a navigation system should refer to the “NAVIGATION SYSTEM OWNER’S MANUAL”. Without navigation system ■ Hands-free system quick guide STEP 1


Setting a cellular phone. (→P. 534) Adding an entry to the phonebook (Up to 20 names can be stored). (→P. 558) Dialing by inputting a name. (→P. 544)


STEP 2


STEP 3


∗: If equipped 529


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone)


Title


Using the hands-free phone system ■ Operating the system using a voice


■ Using the hands-free phone system for


■ Menu list of the hands-free phone sys-


command


the first time


tem


Making a phone call ■ Dialing by inputting a number ■ Dialing by inputting a name ■ Speed dialing ■ When receiving a phone call ■ Transferring a call ■ Using the call history memory Setting a cellular phone ■ Registering a cellular phone ■ Selecting the cellular phone to be used ■ Changing a registered name ■ Listing the registered cellular phone ■ Deleting a cellular phone ■ Changing the passkey ■ Turning the hands-free phone auto-


matic connection on/off Security and system setup ■ Setting or changing the PIN ■ Locking or unlocking the phone book ■ Setting voice guidance volume ■ Initialization Using the phone book ■ Adding a new phone number ■ Setting speed dials ■ Changing a registered name ■ Deleting registered data ■ Deleting speed dials ■ Listing the registered data


530


SIENNA_U (OM45477U)


Page


P. 534


P. 543


P. 548


P. 553


P. 558


3-5. Using the hands-free phone system (for cellular phone)


■Conditions under which the system will not operate


●If using a mobile phone that does not support Bluetooth® ●If the mobile phone is switched off ●If you are outside service range ●If the mobile phone is not connected ●If the mobile phone’s battery is low ●If the mobile phone is behind the seat or in the glove box or console box ●If metal is covering or touching the phone


■When using the hands-free system


●The audio system and voice guidance are muted when making a call. ●If both parties speak at the same time, it may be difficult to hear. ●If the incoming call volume is overly loud, an echo may be heard. ●Try to face toward the microphone as much as possible when speaking. ●In the following circumstances, it may be difficult to hear the other party:


• When driving on unpaved roads • When driving at high speeds • When a window is open • When the air conditioning is blowing directly on the microphone • When the air conditioning is set to high


■When transferring ownership of the vehicle


Be sure to initialize the system to prevent personal data from being improp- erly accessed.


531


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone)


■About Bluetooth®


Bluetooth is a registered trademark of Bluetooth SIG. Inc.


■Compatible models


Compatible with HFP (Hands Free Profile) Ver. 1.5 and OPP (Object Push Profile) Ver. 1.1. If your cellular phone does not support HFP, you cannot enter the Bluetooth® phone. If your cellular phone supports OPP alone, you cannot use the Bluetooth® phone.


■Certification for the hands-free phone system


FCC ID: AJDK025 IC ID: 775E-K025
MADE IN THAILAND This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired oper- ation.


532


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone)


CAUTION


■FCC WARNING


Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC/ IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply with- out maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 7.9 in. (20 cm) and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles). This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.


■Caution while driving


Do not use a cellular phone, or connect the Bluetooth® phone.


NOTICE


■To prevent damage to a cellular phone


Do not leave a cellular phone in the vehicle. The temperature inside may become high resulting in damage to the phone.


533


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone) Using the hands-free phone system (for cellular phone)∗


■ Audio unit


Displays such messages, phone number


items as and


name,


Lower-case characters and special characters, such as an umlaut, cannot be dis- played.


Selects items such as menu or number Turn: Selects an item Press: Inputs the selected item Selects speed dials Bluetooth® connection con- dition and reception level


If “BT” is not displayed, the hands-free phone system cannot be used.


∗: If equipped


534


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone)


■ Steering wheel telephone switches


Volume


The voice guidance volume cannot be adjusted using this button.


Hands-free phone system off/ends a call/refuses a call Hands-free phone system on/starts a call Press: Voice command sys- tem on Press and hold: Voice com- mand system off


■ Microphone


535


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone)


Operating the system using a voice command


By following voice guidance instructions output from the speaker, voice commands can be given to allow for operation of the hands-


free phone system without checking the display or operating


■ Operation procedure when using a voice command


Press the talk switch and follow voice guidance instructions.


■ Auxiliary commands when using a voice command


The following auxiliary commands can be used when operating the system using a voice command: Cancel: Exits the hands-free phone system Repeat: Repeats the previous voice guidance instruction Go back: Returns to the previous procedure Help: Reads aloud the function summary if a help comment is registered for the selected function


536


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone)


Using the hands-free phone system for the first time


Before using the hands-free phone system, it is necessary to register a cellular phone in the system. The phone registration mode will be entered automatically when starting the system with no cellular phone registered. Follow the procedure below to register a cellular phone: STEP 1
The introductory guidance and phone name registration instructions are heard.


Press off-hook switch or talk switch.


STEP 2


Select “Pair Phone” using a voice command or


STEP 3


Register a phone name by either of the following methods.


a. Select “Record Name” using


, and say a name to be


registered.


b. Press the talk switch and say a name to be registered.


A voice guidance instruction to confirm the input is heard.


STEP 4


Select “Confirm” using a voice command or


537


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone)


Registration to the hands-free phone system only


STEP 5


Select “Phone Only” using a voice command or


Registration to the hands-free phone system and Bluetooth® audio system at the same time STEP 5


Select “Internal Audio (Int, Audio)” using a voice command or


Select “Confirm” by using a voice command or


STEP 6
A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the cellular phone is heard. STEP 7


Input the passkey into the cellular phone. Refer to the manual that comes with the cellular phone for the oper- ation of the phone.


Guidance for registration completion is heard.


538


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone)


Menu list of the hands-free phone system


■ Normal operation


First menu


Second menu


Third menu


Operation detail


“Callback”


“Redial”


“Dial by number” “Dial by name”


“Phone- book”


“Add Entry” “Change Name” “Delete Entry” “Delete Speed Dial (Del Spd Dial)” “List Names” “Set Speed Dial (Speed Dial)”


Dialing a number stored in the incoming call history memory Dialing a number stored in the outgoing call history memory


Dialing by inputting a number


Dialing by inputting a name registered in the phone book


Adding a new number


Changing a name in the phone book


Deleting the phone book data


Deleting a registered speed dial


Listing the phone book data


Registering a speed dial


539


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone)


First menu


Second menu


Third menu


Operation detail


“Security”


“Setup”


“Phone Setup”


“System Setup”


“Set PIN” “Phonebook Lock” “Phonebook Unlock”


“Pair Phone”


“Change Name”


“Delete Phone”


“List Phones”


“Select Phone”


“Set Passkey” “Hands-free power” “Guidance Vol- ume” “Device Name” “Initialize”


Setting a PIN code


Locking the phone book


Unlocking the phone book


Registering the cellular phone to be used Changing a registered name of a cellular phone Deleting a registered cellular phone Listing the registered cellular phones Selecting a cellular phone to be used Changing the passkey Setting the hands-free power on/off Setting voice guidance vol- ume Displaying device information Initialization


540


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone)


■ Using a short cut key


First menu


Second menu


Operation detail


“Dial XXX (name)”


“Dial XXX (number)” “Phone book add entry”


“Phone book change name”


“Phone book delete entry” “Phone book set speed dial” “Phone book delete speed dial”


“Phonebook”


“Phone book list names”


Dialing a number registered in the phone book Dialing the input numbers


Adding a new number


Changing the name of a phone number in the phone book


Deleting phone book data


Registering a speed dial


Deleting a speed dial


“Phonebook Unlock” Unlocking the phone book “Phonebook Lock”


Locking the phone book


Listing the phone book data


541


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone)


■Automatic adjustment of volume


When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less.


■When using a voice command


●For numbers, say a combination of single digits from zero to nine, #


(pound), ∗ (star), and + (plus).


●Say a command correctly and clearly.


■The system may not recognize your voice in the following situations:


●When driving on a rough road ●When driving at high speeds ●When air is blowing out of the vents onto the microphone ●When the air conditioning fan emits a loud noise


■The following cannot be performed while driving:


●Operating the system with


●Registering a cellular phone to the system


■Changing the passkey


→P. 552


542


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone) Making a phone call


■ Making a phone call


● Dialing by inputting a number


“Dial by number”


● Dialing by inputting a name


“Dial by name” ● Speed dialing ● Dialing a number stored in the outgoing history memory


“Redial”


● Dialing a number stored in the incoming history memory


“Call back”


■ Receiving a phone call ● Answering the phone ● Refusing the call ■ Transferring a call ■ Using the call history memory


● Dialing ● Storing data in the phone book ● Deleting


SIENNA_U (OM45477U)


543


3-5. Using the hands-free phone system (for cellular phone)


Dialing by inputting a number


STEP 1


STEP 2


STEP 3


Press the talk switch and say “Dial by number”. Press the talk switch and say the phone number. Dial by one of the following methods: a. Press the off- hook switch. b. Press the talk switch and say “Dial”.


c. Select “Dial” using


Dialing by inputting a name


STEP 1


STEP 2


Press the talk switch and say “Dial by name”. Select a registered name to be input by either of the following methods: a. Press the talk switch and say a registered name. b. Press the talk switch and say “List names”. Press the talk


switch while the desired name is being read aloud.


STEP 3


Dial by one of the following methods: a. Press the off-hook switch. b. Press the talk switch and say “Dial”.


c. Select “Dial” using


544


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone)


Speed dialing


STEP 1


STEP 2


STEP 3


Press the off-hook switch. Press the preset button in which the desired number is regis- tered. Press the off-hook switch.


When receiving a phone call


■ Answering the phone


Press the off-hook switch.


■ Refusing the call


Press the on-hook switch.


Transferring a call


A call can be transferred between the cellular phone and system while dialing or receiving a call, or during a call. Use one of the follow- ing methods:


a. Operate the cellular phone.


Refer to the manual that comes with the cellular phone for the oper- ation of the phone.


b. Press the off-hook switch*1. c. Press the talk switch and say “Call Transfer”*2. *1: This operation can be performed only when transferring a call


from the cellular phone to the system during a call.


*2: While the vehicle is in motion, a call cannot be transferred


from the system to the cellular phone.


545


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone)


Using the call history memory


Follow the procedure below to use a number stored in the call history memory:


STEP 1


STEP 2


Press the talk switch and say “Redial” (when using a number stored in the outgoing call history memory) or “Call back” (when using a number stored in the incoming call history memory). Select the number by either of the following methods: a. Say “Previous” or “Go back” until the desired number is dis-


played.


b. Select the desired number using


The following operations can be performed:


Dialing: Press the off-hook switch or select “Dial” using a voice


command or


Storing the number in the phone book: Select “Store” using a voice


command or


Deleting: Select “Delete” using a voice command or


546


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone)


■Call history


Up to 5 phone numbers can be stored in each of the outgoing and incoming call history memories.


■When talking on the phone


●Do not talk simultaneously with the other party. ●Keep the volume of the received voice down. Otherwise, voice echo will


increase.


547


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone) Setting a cellular phone


Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for reg- istered cellular phones: ■ Functions and operation procedures To enter the menu for each function, follow the steps below using a


voice command or


● Registering a cellular phone


1. “Setup” → 2. “Phone Setup” → 3. “Pair Phone”


● Selecting the cellular phone to be used


1. “Setup” → 2. “Phone Setup” → 3. “Select Phone”


● Changing a registered name


1. “Setup” → 2. “Phone Setup” → 3. “Change Name”


● Listing the registered cellular phones


1. “Setup” → 2. “Phone Setup” → 3. “List Phones”


● Deleting a cellular phone


1. “Setup” → 2. “Phone Setup” → 3. “Delete Phone”


● Changing the passkey


1. “Setup” → 2. “Phone Setup” → 3. “Set Passkey”


● Turning the hands-free phone automatic connection on/off


1. “Setup” → 2. “Phone Setup” → 3. “Hands-free power”


548


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone)


Registering a cellular phone


Select “Pair Phone” using a voice command or procedure for registering a cellular phone. (→P. 537)


, and do the


Selecting the cellular phone to be used


STEP 1


Select “Select Phone” using a voice command or


Pattern A STEP 2


Select the cellular phone to be used by either of the following methods, and select “Confirm” using a voice command or


a. Press the talk switch and say the desired phone name. b. Press the talk switch and say “List phones”. While the name of the desired cellular phone is being read aloud, press the talk switch.


Pattern B STEP 2


Select the cellular phone to be used using


549


SIENNA_U (OM45477U)


3-5. Using the hands-free phone system (for cellular phone)


Changing a registered name


STEP 1


Select “Change Name” using a voice command or


STEP 2


Select the name of the cellular phone to be changed by one of the following methods: a. Press the talk switch and say the desired phone name, and


select “Confirm” using a voice command or


b. Press the talk switch and say “List phones”. While the desired phone name is being read aloud, press the talk switch.


c. Select the desired phone name using


STEP 3


Press the talk switch or select “Record Name” using and say a new name.


STEP 4


Select “Confirm” using a voice command or


Loading...
x