smart key system) to indicate that a system check is being per- formed. They will turn off after the engine is started, or after a few seconds. There may be a malfunction in a system if a light does not come on, or if the lights do not turn off. Have the vehicle inspected by your Toyota dealer for details.
*2: The light flashes to indicate a malfunction.
250
SIENNA_U (OM45477U)
2-2. Instrument cluster and information display
CAUTION
■If a safety system warning light does not come on
Should a safety system light such as the ABS or SRS airbag warning light not come on when you start the engine, this could mean that these systems are not available to help protect you in an accident, which could result in death or serious injury. Have the vehicle inspected by your Toyota dealer immediately if this occurs.
251
SIENNA_U (OM45477U)
2-2. Instrument cluster and information display Multi-information display∗
The multi-information display presents the driver with a variety of driving-related data, including the clock and current outside temper- ature. The display varies depending on its specification.
● Clock
Indicates and sets the time.
● Outside temperature display
(→P. 256)
Indicates the outside temperature. The temperature range that can be displayed is from -40°F (-40°C) to 122°F (50°C).
● Air conditioning system display
(→P. 388)
Automatically displayed when the air conditioning is turned on.
● Rear view monitor
(→P. 321)
Automatically displayed when the shift lever is moved into R.
● Trip information
(→P. 253) Displays driving range, fuel consumption and other cruising-related information.
● Intuitive parking assist display (if equipped)
(→P. 314)
∗: If equipped
252
SIENNA_U (OM45477U)
2-2. Instrument cluster and information display
● Warning messages
(→P. 744) Automatically displayed when a malfunction occurs in one of the vehi- cle’s systems.
● Customizable features setting display
(→P. 820)
Switching the display
“INFO” button “SELECT RESET” button “SETUP” button
Display items
Display items can be switched by pressing the “INFO” button. The display varies depending on its specification. ■ Average Fuel Economy
Displays the average fuel consumption since the function was reset.
• The function can be reset by pressing and holding the “SELECT RESET” button when the average fuel economy is displayed.
• Use the displayed average fuel consumption as a
reference.
253
SIENNA_U (OM45477U)
2-2. Instrument cluster and information display
■ Current Fuel Economy
Displays the current rate of fuel consumption.
■ Distance to Empty
Displays the estimated maximum distance that can be driven with the quantity of fuel remaining.
• This distance is computed based on your average fuel consumption. As a result, the actual distance that can be driven may differ from that displayed. • When only a small amount of fuel is added to the
tank, the display may not be updated. When refueling, turn the “ENGINE START STOP” switch off (vehicles with a smart key system) or the engine switch is turned to the “OFF” position (vehicles without a smart key system). If the vehi- cle is refueled without turning the “ENGINE START STOP” switch off (vehicles with a smart key system) or the engine switch is turned to the “OFF” position (vehicles without a smart key sys- tem), the display may not be updated.
Displays the average vehicle speed since the engine was started or since the function was reset.
The function can be reset by pressing and holding the “SELECT RESET” button when the average speed is displayed.
■ Average Speed
254
SIENNA_U (OM45477U)
■ Trip Timer
2-2. Instrument cluster and information display
Displays the elapsed time since the timer was reset.
The timer only functions when the engine is running. The timer can be started and paused by pressing the “SELECT RESET” button, and reset by pressing and holding the “SELECT RESET” button when the trip timer is displayed.
Set up display
■ Before setting
STEP 1
Press the “SETUP” button while the vehicle is stopped. The “Custom Settings” screen is displayed on the multi-information display. If left idle for approximately 20 seconds, the display will revert to the previous screen.
STEP 2
“Display
Select / Clock” by pressing the “INFO” or “SETUP” button, and press the “SELECT RESET” button.
If you select “Exit” and press “SELECT RESET”, the display will revert to the previous screen.
255
SIENNA_U (OM45477U)
2-2. Instrument cluster and information display
STEP 3
Select the desired item by press- ing the “INFO” or “SETUP” but- ton.
Press the “SELECT RESET” but- ton to enter the setting mode. The current setting is indicated by yellow text.
■ Setting the clock
STEP 1
Select “Clock” on the “Display Settings” screen, and press the “SELECT RESET” button.
STEP 2
Press the “INFO” button to adjust the hours and the “SETUP” but- ton to adjust the minutes.
Press the “SELECT RESET” but- ton to set the clock.
■ Selecting the units
STEP 1
Select “Units” on the “Display Settings” screen, and press the “SELECT RESET” button.
Select the units you want to read by pressing “INFO” or “SETUP” button.
the
Press the “SELECT RESET” but- ton to set the units. The current setting is indicated by yellow text.
STEP 2
256
SIENNA_U (OM45477U)
2
2-2. Instrument cluster and information display
■ Selecting the language
STEP 1
Select “Language” on the “Display Settings” screen, and press the “SELECT RESET” button.
STEP 2
Select the language you want to read by pressing the “INFO” or “SETUP” button.
Press the “SELECT RESET” but- ton to set the language. The current setting is indicated by yellow text. To shortcut directly to the “Lan- guage” screen from the initial “Custom Settings” screen, press and hold the “SETUP” button for 5 seconds.
■ Setting up the information display
STEP 1
Select “Screen Settings” on the “Display Settings” screen, and press the “SELECT RESET” button.
STEP 2
For vehicles without a navigation system, select “Climate / Info” by pressing the “INFO” or “SETUP” button.
Press the “SELECT RESET” but- ton to enter the adjustment mode.
257
SIENNA_U (OM45477U)
2-2. Instrument cluster and information display
● Setting the brightness
STEP 1
STEP 2
“Brightness” on
Select the “Screen Settings” screen, and press the “SELECT RESET” but- ton.
Press the “INFO” or “SETUP” button to adjust the brightness. +: Brighter -: Darker
Press the “SELECT RESET” but- ton to exit the screen.
258
SIENNA_U (OM45477U)
2-2. Instrument cluster and information display
● Setting the contrast
STEP 1
Select “Contrast” on the “Screen Settings” screen, and press the “SELECT RESET” button.
STEP 2
Press the “INFO” or “SETUP” button to adjust the contrast. +: Strengthen -: Weaken
Press the “SELECT RESET” but- ton to exit the screen.
■ Setting up the rear view monitor display (if equipped with the
rear view monitor system)
STEP 1
Select “Screen Settings” on the “Display Settings” screen, and press the “SELECT RESET” button.
STEP 2
Select “Back Monitor” by press- ing the “INFO” or “SETUP” but- ton.
Press the “SELECT RESET” but- ton to enter the adjustment mode.
259
SIENNA_U (OM45477U)
2-2. Instrument cluster and information display
● Setting the brightness
STEP 1
STEP 2
● Setting the contrast
STEP 1
“Brightness” on
Select the “Screen Settings” screen, and press the “SELECT RESET” but- ton.
Press the “INFO” or “SETUP” button to adjust the brightness. +: Brighter -: Darker
Press the “SELECT RESET” but- ton to the exit screen.
Select “Contrast” on the “Screen Settings” screen, and press the “SELECT RESET” button.
260
SIENNA_U (OM45477U)
STEP 2
2-2. Instrument cluster and information display
Press the “INFO” or “SETUP” button to adjust the contrast. +: Strengthen -: Weaken
Press the “SELECT RESET” but- ton to exit the screen.
● Setting the color
STEP 1
Select “Color” on the “Screen Settings” screen, and press the “SELECT RESET” button.
STEP 2
Press the “INFO” or “SETUP” button to adjust the color. +: Green -: Red
Press the “SELECT RESET” but- ton to exit the screen.
261
SIENNA_U (OM45477U)
2-2. Instrument cluster and information display
● Setting the tone
STEP 1
STEP 2
Select “Tone” on the “Screen Settings” screen, and press the “SELECT RESET” button.
Press the “INFO” or “SETUP” button to adjust the tone. +: Brighter -: Darker
Press the “SELECT RESET” but- ton to exit the screen.
■ Returning to the previous screen
Select “Return” on the “Screen Settings” screen, and press the “SELECT RESET” button.
262
SIENNA_U (OM45477U)
2
2-2. Instrument cluster and information display
■If the vehicle is moved while settings are being changed on the multi-
information display
If the vehicle speed exceeds approxi- mately 3 mph (5 km/h) while the settings are being changed, “Please Stop Vehicle to Change Settings” will be displayed on the multi-information display, and setting mode will exit after several seconds. If the “SETUP” button is pressed at a speed in excess of 3 mph (5 km/h), only some of the settings can be changed. To change the other settings, press the “SETUP” button after bringing the vehicle to a com- plete stop.
263
SIENNA_U (OM45477U)
2-2. Instrument cluster and information display
■Eco Driving Indicator
Eco Driving Indicator Light During Eco-friendly acceleration (Eco driving), Eco Driving Indicator Light will turn on. Eco Driving Indicator Zone Display* Suggests Zone of Eco driving with cur- rent Eco driving ratio based on accel- eration. *: The display varies depending on its
specification.
Zone of Eco driving Eco driving ratio based on acceleration If the vehicle exceeds Zone of Eco driving, the right side of Eco Driving Indicator Zone Display will blink and Eco Driving Indicator Light will turn off. Eco Driving Indicator will operate in the following conditions: ●The shift lever is in D. ●Vehicle speed is below approximately
80mph (130 km/h).
264
SIENNA_U (OM45477U)
2
2-2. Instrument cluster and information display
■System check display
Vehicles without a smart key system
After switching the engine switch to the “ON” position, “SIENNA” is dis- played while system operation is checked. When the system check is complete, the normal screen will return.
Vehicles with a smart key system
After switching the “ENGINE START STOP” switch to IGNITION ON mode, “SIENNA” is displayed while system operation is checked. When the system check is complete, the normal screen will return.
■When “--”, “E” or “F” is displayed on the outside temperature display The system may be malfunctioning. Take your vehicle to your Toyota dealer.
■Outside temperature display
In the following situations, the correct outside temperature may not be dis- played, or the display may take longer than normal to change. ●When stopped, or driving at low speeds (less than 12 mph [20 km/h]) ●When the outside temperature has changed suddenly (at the entrance/
exit of a garage, tunnel, etc.)
NOTICE
■The multi-information display at low temperatures
Allow the interior of the vehicle to warm up before using the liquid crystal information display. At extremely low temperatures, the information display monitor may respond slowly, and display changes may be delayed.
265
SIENNA_U (OM45477U)
2-3. Operating the lights and wipers Headlight switch
The headlights can be operated manually or automatically. Turning the end of the lever turns on the lights as follows: The illustration is intended as an example. Type A
equipped)
The side marker, park- ing, tail, license plate, daytime running lights (if and instrument panel lights turn on. The headlights and all lights listed above turn on. The headlights, side marker, parking lights, daytime running lights and so on turn on and automatically off (when the engine switch is in the “ON” position [vehicles with- out a smart key sys- tem] or the “ENGINE START STOP” switch is IGNITION ON mode [vehicles with a smart key system]). The daytime running light system is on. The daytime running light system is off.
in
(if equipped)
(if equipped)
(if equipped)
Type B
266
SIENNA_U (OM45477U)
2
2-3. Operating the lights and wipers
(if equipped)
(if equipped)
Off. Vehicles with the day- time running light sys- tem: The daytime running light system is on. Off. Vehicles with the day- time running light sys- tem: The daytime running light system is on.
267
SIENNA_U (OM45477U)
2-3. Operating the lights and wipers
Turning on the high beam headlights
With the headlights on, push the lever away from you to turn on the high beams. When the light switch is in position, the Automatic High Beam system will be activated. (→P. 273) Pull the lever toward you to the center position to turn the high beams off. Pull the lever toward you and release it to flash the high beams once. You can flash the high beams with the headlights on or off.
268
SIENNA_U (OM45477U)
2-3. Operating the lights and wipers
Manual headlight headlights)
leveling dial
(vehicles with discharge
The level of the headlight aim can be adjusted according to the num- ber of passengers and the loading condition of the vehicle.
Raises the level of the head- lights Lowers the level of the head- lights
■ Guide to dial settings
Occupancy and luggage load conditions
Dial position
Occupants
Luggage load
2WD models
AWD models
Driver
Driver and front pas-
senger
Driver, front passen- ger and all passen- gers in the second
seat
All seats occupied All seats occupied
Driver
None
None
None
None
Full luggage loading Full luggage loading
0.5
1.5
0.5
3.5
1.5
269
SIENNA_U (OM45477U)
2-3. Operating the lights and wipers
■Daytime running light system (if equipped)
●To make your vehicle more visible to other drivers, the headlights turn on automatically (at a reduced intensity) whenever the engine is started and the parking brake is released. Daytime running lights are not designed for use at night. For the U.S.A.: Daytime running lights can be turned off by operating the headlight switch.
●Compared to turning on the headlights, the daytime running light system offers greater durability and consumes less electricity, so it can help improve fuel economy.
■Headlight control sensor (if equipped)
The sensor may not function properly if an object is placed on the sensor, or any- thing that blocks the sensor is affixed to the windshield. Doing so the sensor detecting the level of ambient light and may cause the automatic headlight sys- tem to malfunction.
interferes with
270
SIENNA_U (OM45477U)
2-3. Operating the lights and wipers
■Automatic light off system
Vehicles without a smart key system ●When the headlights are on: The headlights and tail lights turn off 30 sec- onds after a door is opened and closed if the engine switch is turned to the “ACC” or “LOCK” position. (The lights turn off immediately if on the key is pressed after all the doors are locked.)
●When only the tail lights are on: The tail lights turn off automatically if the engine switch is turned to the “ACC” or “LOCK” position and the driver’s door is opened.
To turn the lights on again, turn the engine switch to the “ON” position, or turn the light switch off once and then back to the Vehicles with a smart key system ●When the headlights are on: The headlights and tail lights turn off 30 sec- onds after a door is opened and closed if the “ENGINE START STOP” switch is turned to ACCESSORY mode or turned off. (The lights turn off immediately if on the key is pressed after all the doors are locked.)
or
●When only the tail lights are on: The tail lights turn off automatically if the “ENGINE START STOP” switch is turned to ACCESSORY mode or turned off and the driver’s door is opened.
To turn the lights on again, turn the “ENGINE START STOP” switch to IGNI- TION ON mode, or turn the light switch off and then back to or
271
SIENNA_U (OM45477U)
2-3. Operating the lights and wipers
■Customization that can be configured at Toyota dealer or by the multi-
information display Settings (e.g. light sensor sensitivity) can be changed. (Customizable features →P. 815)
NOTICE
■To prevent battery discharge
Do not leave the lights on longer than necessary when the engine is not run- ning.
272
SIENNA_U (OM45477U)
2
2-3. Operating the lights and wipers Automatic High Beam∗
The Automatic High Beam uses an in-vehicle camera sensor to assess the brightness of streetlights, the lights of oncoming and preceding vehicles, etc., and automatically turns high beam on or off as necessary. ■ Activating the Automatic High Beam system
position when
Push the lever away from you with the headlight switch in the the “ENGINE START STOP” switch is in IGNITION ON mode (vehicles with a smart key system) or the engine switch is in the “ON” position (vehicles without a smart key system).
The Automatic High Beam indi- cator will come on when the headlights are turned on auto- matically to indicate that the system is active.
∗: If equipped
273
SIENNA_U (OM45477U)
2-3. Operating the lights and wipers
■ Turning the high beam on/off manually Switching to low beam
Pull the lever to the original position.
Switching to high beam
Turn the light switch to the
position.
274
SIENNA_U (OM45477U)
2
2-3. Operating the lights and wipers
■ High beam automatic turning on or off conditions
When all of the following conditions are fulfilled, high beam will be automatically turned on (after approximately 1 second): ● Vehicle speed is above approximately 20 mph (32 km/h). ● The area ahead of the vehicle is dark. ● There are no oncoming or preceding vehicles with headlights or
tail lights turned on.
If any of the following conditions are fulfilled, high beam will be automatically turned off: ● Vehicle speed drops below approximately 20 mph (32 km/h). ● The area ahead of the vehicle is not dark. ● Oncoming or preceding vehicles have headlights or tail lights
turned on.
275
SIENNA_U (OM45477U)
2-3. Operating the lights and wipers
■Limitations of the Automatic High Beam
Do not rely on the Automatic High Beam. Always drive safely, taking care to observe your surroundings and turning high beam on or off manually if nec- essary.
■Camera sensor detection information
●High beam may not be automatically turned off in the following situations:
• When oncoming vehicles suddenly appear from a curve. • When the vehicle is cut in front of by another.
●High beam may be turned off if an oncoming vehicle that is using fog
lights without using the headlights is detected.
●Houselights, streetlights, red traffic signals, and illuminated billboards or
signs may cause the high beam to turn off.
●The following factors may affect the amount of time taken to turn high
beam on or off: • The brightness of headlights, fog lights, and tail lights of oncoming and
preceding vehicles
• Road conditions (wetness, ice, snow etc.) • The number of passengers and amount of baggage
●High beam may be turned on or off when unexpected by the driver.
276
SIENNA_U (OM45477U)
2-3. Operating the lights and wipers
●In the situations below, the system may not be able to correctly detect the surrounding brightness levels, and may flash or expose nearby pedestri- ans to the high beam. Therefore, you should consider turning the high beam on or off manually rather than relying on the Automatic High Beam system. • In bad weather (rain, snow, fog, sandstorms etc.) • The windshield is obscured by fog, mist, ice, dirt etc. • The windshield is cracked or damaged. • The inside rear view mirror or camera sensor is deformed or dirty. • Surrounding brightness levels are equal to those of headlights, tail
lights or fog lights.
• Vehicles ahead have headlights that are either switched off, dirty, are
changing color, or are not aimed properly.
• When driving through an area of intermittently changing brightness and
• When frequently and repeatedly driving ascending/descending roads, or roads with rough, bumpy or uneven surfaces (such as stone-paved roads, gravel tracks etc.)
• When frequently and repeatedly taking curves or driving on a winding
• There is a highly reflective object ahead of the vehicle, such as a sign
darkness
road
or a mirror.
• The vehicle’s headlights are damaged or dirty. • The vehicle is lifting or tilting, due to a flat tire, a trailer being towed etc. • The Automatic High Beam indicator is flashing. • The high beam and low beam are repeatedly being switched between
in an abnormal manner.
• The driver believes that the high beam may be causing problems or
distress to other drivers or pedestrians nearby.
277
SIENNA_U (OM45477U)
2-3. Operating the lights and wipers
■If the Automatic High Beam indicator flashes...
It may indicate a malfunction in the system. Contact your Toyota dealer.
■Customization that can be configured at Toyota dealer or by the multi-
information display The Automatic High Beam can be turned off. (Customizable features →P. 815)
■Temporary lowering sensor sensitivity
The sensitivity of the sensor can be temporarily lowered. To lower the sensitivity, push and hold on the inside rear view mirror for 15 to 20 seconds, and release. The indicator light on the inside rear view mirror will flash to indicate that the sensitivity has been lowered. Vehicles without a smart key system: When the engine switch is turned to the “LOCK” position, the sensitivity will be returned to its normal level. Vehicles with a smart key system: When the “ENGINE START STOP” switch is turned off, the sensitivity will be returned to its normal level.
278
SIENNA_U (OM45477U)
NOTICE
■Camera sensor
2-3. Operating the lights and wipers
Observe the following to ensure that the Automatic High Beam functions correctly.
●Do not touch the camera sensor. ●Do not subject the inside rear view mirror or the camera sensor to a strong
impact.
●Do not disassemble the camera sensor. ●Do not spill liquid onto the inside rear view mirror or the camera sensor. ●Do not apply window tinting or stickers to the camera sensor or the area of
windshield near the camera sensor.
●Do not place items on the dashboard. There is a possibility that the cam- era sensor will mistake items reflected in the windshield for streetlights, the headlights of other vehicles, etc.
●Do not install a parking tag or any other accessories near or around the
inside rear view mirror and the camera sensor.
●Do not overload the vehicle. ●Do not modify the vehicle. ●Do not replace windshield with a non-genuine windshield.
Contact your Toyota dealer.
■Headlight leveling
When the vehicle is loaded, headlight level should be adjusted to appropri- ate dial setting. (→P. 269)
279
SIENNA_U (OM45477U)
2-3. Operating the lights and wipers Fog light switch∗
The fog lights secure excellent visibility in difficult driving condi- tions, such as in rain and fog. Type A
Turns the front fog lights off Turns the front fog lights on
∗: If equipped
280
SIENNA_U (OM45477U)
Type B
2-3. Operating the lights and wipers
Turns the front fog lights off Turns the front fog lights on
■Fog lights can be used when
The headlights are on in low beam.
281
SIENNA_U (OM45477U)
2-3. Operating the lights and wipers Windshield wipers and washer
Intermittent windshield wipers with interval adjuster
The wiper operation is selected by moving the lever as follows. When intermittent windshield wiper operation is selected, the wiper interval can be also adjusted.
Type A
Off Intermittent wind- shield wiper opera- tion Low speed wind- shield wiper opera- tion High speed wind- shield wiper opera- tion Temporary operation
the
Increases intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency
282
SIENNA_U (OM45477U)
2-3. Operating the lights and wipers
Washer/wiper dual opera- tion The wipers will automatically operate a couple of times after the washer squirts.
Type B
Off Intermittent wind- shield wiper opera- tion Low speed wind- shield wiper opera- tion High speed wind- shield wiper opera- tion Temporary operation
283
SIENNA_U (OM45477U)
2-3. Operating the lights and wipers
the
Increases intermittent windshield wiper frequency Decreases the intermittent windshield wiper frequency
Washer/wiper dual opera- tion The wipers will automatically operate a couple of times after the washer squirts.
284
SIENNA_U (OM45477U)
2
2-3. Operating the lights and wipers
Rain-sensing windshield wipers (if equipped)
When “AUTO” is selected, the wipers will operate automatically when the sensor detects falling rain. The system automatically adjusts wiper timing in accordance with rain volume. When “AUTO” is selected, the sensor sensitivity can be adjusted as follows by turning the switch ring:
Type A
Off Rain-sensing wiper operation (“AUTO”) Low speed wiper operation High speed wiper operation Temporary operation
285
SIENNA_U (OM45477U)
Increases the sensitivity Decreases the sensitivity
Washer/wiper dual opera- tion The wipers will automatically operate a couple of times after the washer squirts.
Off Rain-sensing wiper operation (“AUTO”) Low speed wiper operation High speed wiper operation Temporary operation
2-3. Operating the lights and wipers
Type B
286
SIENNA_U (OM45477U)
2
2-3. Operating the lights and wipers
Increases the sensitivity Decreases the sensitivity
Washer/wiper dual opera- tion The wipers will automatically operate a couple of times after the washer squirts.
287
SIENNA_U (OM45477U)
2-3. Operating the lights and wipers
■The windshield wipers and washer can be operated when
Vehicles without a smart key system: The engine switch is in the “ON” position. Vehicles with a smart key system: The “ENGINE START STOP” switch is in IGNITION ON mode.
■Raindrop sensor (vehicles with rain-sensing windshield wipers)
●The raindrop sensor judges the amount
of raindrops.
●If the wiper switch is turned to “AUTO” position while the “ENGINE START STOP” switch is in IGNITION ON mode, the wiper will operate once to show that “AUTO” mode is activated.
●If the temperature of the raindrop sensor is 185°F (85°C) or higher, or 14°F (-10°C) or lower, automatic operation may not occur. In this case, operate the wipers in any mode other than “AUTO”.
■If no windshield washer fluid sprays
Check that the washer nozzles are not blocked if there is washer fluid in the windshield washer fluid reservoir.
288
SIENNA_U (OM45477U)
2-3. Operating the lights and wipers
CAUTION
■Caution regarding the use of windshield wipers in “AUTO” mode
The windshield wipers may operate unexpectedly if the sensor is touched or the windshield is subject to vibration in “AUTO” mode. Take care that your fingers etc. do not become caught in the windshield wipers.
NOTICE
■When the windshield is dry
Do not use the wipers, as they may damage the windshield.
■When the washer fluid tank is empty
Do not operate the switch continually as the washer fluid pump may over- heat.
■When a nozzle becomes blocked
In this case, contact your Toyota dealer. Do not try to clear it with a pin or other object. The nozzle will be damaged.
289
SIENNA_U (OM45477U)
2-3. Operating the lights and wipers Rear window wiper and washer
The wiper operation is selected by moving the lever as follows: Type A
window
Off Intermittent window wiper operation Normal wiper operation Washer/wiper dual operation Washer/wiper dual operation
290
SIENNA_U (OM45477U)
2
Type B
2-3. Operating the lights and wipers
window
Off Intermittent window wiper operation Normal wiper operation Washer/wiper dual operation Washer/wiper dual operation
■The rear window wiper and washer can be operated when
Vehicles without a smart key system: The engine switch is in the “ON” position. Vehicles with a smart key system: The “ENGINE START STOP” switch is in IGNITION ON mode.
■If no windshield washer fluid sprays
Check that the washer nozzles are not blocked if there is washer fluid in the windshield washer fluid reservoir.
291
SIENNA_U (OM45477U)
2-3. Operating the lights and wipers
NOTICE
■When the rear window is dry
Do not use the wiper, as it may damage the rear window.
■When the washer fluid tank is empty
Do not operate the switch continually as the washer fluid pump may over- heat.
292
SIENNA_U (OM45477U)
2-4. Using other driving systems Cruise control∗
Use cruise control to maintain a set speed without depressing the accelerator pedal.
Indicators Cruise control switch
■ Setting the vehicle speed
STEP 1
Press the “ON-OFF” button to activate the cruise control.
indicator will
Cruise control come on. Press the button again deactivate the cruise control.
to
Accelerate or decelerate the vehicle to the desired speed, and push the lever down to set the speed.
“SET” indicator will come on. The vehicle speed at the moment the lever is released becomes the set speed.
∗: If equipped
293
STEP 2
SIENNA_U (OM45477U)
2-4. Using other driving systems
■ Adjusting the set speed
To change the set speed, operate the lever until the desired set speed is obtained.
Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction. Large adjustment: Hold lever in the desired direction.
the
The set speed will be increased or decreased as follows: Fine adjustment: By approximately 1 mph (1.6 km/h) each time the lever is operated. Large adjustment: The set speed can be decreased continually until the lever is released.
increased or
294
SIENNA_U (OM45477U)
2
2-4. Using other driving systems
■ Canceling and resuming the constant speed control
Pulling the lever toward you cancels the constant speed control. The speed setting is also can- celed when the brakes are applied. Pushing resumes speed control. Resuming is available when the vehicle speed is more than approximately 25 mph (40 km/h).
lever up constant
the the
295
SIENNA_U (OM45477U)
2-4. Using other driving systems
■Cruise control can be set when
●The shift lever is in D or more than range 4 of S has been selected. ●Vehicle speed is above approximately 25 mph (40 km/h).
■Accelerating after setting the vehicle speed
●The vehicle can be accelerated normally. After acceleration, the set
speed resumes.
●Even without canceling the cruise control, the set speed can be increased by first accelerating the vehicle to the desired speed and then pushing the lever down to set the new speed.
■Automatic cruise control cancelation
Cruise control will stop maintaining the vehicle speed in any of the following situations. ●Actual vehicle speed falls more than approximately 10 mph (16 km/h)
below the preset vehicle speed. At this time, the memorized set speed is not retained.
●Actual vehicle speed is below approximately 25 mph (40 km/h). ●Enhanced VSC is activated.
■If the cruise control indicator light flashes
Press the “ON-OFF” button once to deactivate the system, and then press the button again to reactivate the system. If the cruise control speed cannot be set or if the cruise control cancels immediately after being activated, there may be a malfunction in the cruise control system. Have the vehicle inspected by your Toyota dealer.
296
SIENNA_U (OM45477U)
2
2-4. Using other driving systems
CAUTION
■To avoid operating the cruise control by mistake
Switch the cruise control off using the “ON-OFF” button when not in use.
■Situations unsuitable for cruise control
Do not use cruise control in any of the following situations. Doing so may result in loss of control and could cause an accident resulting in death or serious injury. ●In heavy traffic ●On roads with sharp bends ●On winding roads ●On slippery roads, such as those covered with rain, ice or snow ●On steep hills
Vehicle speed may exceed the set speed when driving down a steep hill.
●When your vehicle is towing a trailer or during emergency towing
297
SIENNA_U (OM45477U)
2-4. Using other driving systems Dynamic radar cruise control∗
Dynamic radar cruise control supplements conventional cruise con- trol with a vehicle-to-vehicle distance control. In vehicle-to-vehicle distance control mode, the vehicle automatically accelerates or decelerates in order to maintain a set following distance from vehi- cles ahead.
Display Set speed Indicators Vehicle-to-vehicle distance button Cruise control switch
∗: If equipped
298
SIENNA_U (OM45477U)
2-4. Using other driving systems
■ Setting the vehicle speed (vehicle-to-vehicle distance con-
trol mode)
STEP 1
STEP 2
Press the “ON-OFF” button to activate the cruise control.
Dynamic radar cruise control indicator will come on. Press the button again deactivate the cruise control.
to
Accelerate or decelerate to the desired speed and push the lever down to set the speed.
The vehicle speed at the moment the lever is released becomes the set speed.
299
SIENNA_U (OM45477U)
2-4. Using other driving systems
■ Adjusting the set speed
To change the set speed, operate the lever until the desired set speed is displayed.
Increases the speed Decreases the speed Fine adjustment: Momentarily move the lever in the desired direction. Large adjustment: Hold lever in the desired direction.
the
In the vehicle-to-vehicle distance control mode, the set speed will be increased or decreased as follows: • When the set speed is shown in “MPH”
Fine adjustment: By approximately 1 mph (1.6 km/h) each time the lever is operated Large adjustment: By approximately 5 mph (8 km/h) for each 0.75 seconds the lever is held
• When the set speed is shown in “km/h”
Fine adjustment: By approximately 0.6 mph (1 km/h) each time the lever is operated Large adjustment: By approximately 3.1 mph (5 km/h) for each 0.75 seconds the lever is held
In the constant speed control mode (→P. 305), the set speed will be increased or decreased as follows: Fine adjustment: By approximately 1 mph (1.6 km/h) each time the lever is operated Large adjustment: The set speed can be decreased continually until the lever is released.
increased or
300
SIENNA_U (OM45477U)
2
2-4. Using other driving systems
■ Changing the vehicle-to-vehicle distance
Pressing the button changes the vehicle-to-vehicle dis- tance as follows:
Long Medium Short Vehicles without a smart key system: The vehicle-to-vehicle distance is set automatically to long mode when the engine switch is turned to the “ON” position. Vehicles with a smart key sys- tem: The vehicle-to-vehicle distance is set automatically to long mode when “ENGINE START STOP” switch is turned to IGNITION ON mode. If a vehicle is running ahead of you, the preceding vehicle mark will be also displayed.
the
301
Preceding vehicle mark
SIENNA_U (OM45477U)
2-4. Using other driving systems
■ Vehicle-to-vehicle distance settings
Select a distance from the table below. Note that the distances shown correspond to a vehicle speed of 50 mph (80 km/h). Vehi- cle-to-vehicle distance increases/decreases in accordance with vehicle speed.
Distance options
Long Medium Short
Vehicle-to-vehicle distance Approximately 160 ft. (50 m) Approximately 130 ft. (40 m) Approximately 100 ft. (30 m)
■ Canceling and resuming the speed control
Pulling the lever toward you cancels the constant speed control. The speed setting is also can- celed when the brakes are applied. lever up Pushing resumes the cruise control and returns vehicle speed to the set speed. Resuming is available when the vehicle speed is more than approximately 25 mph (40 km/h).
the
302
SIENNA_U (OM45477U)
2-4. Using other driving systems
Driving in vehicle-to-vehicle distance control mode
This mode employs a radar sensor to detect the presence of vehicles up to approximately 400 ft. (120 m) ahead, determines the current vehicle-to-vehicle following distance, and operates to maintain a suit- able following distance from the vehicle ahead.
Note that vehicle-to-vehicle distance will close in when traveling on long downhill slopes.
Example of constant speed cruising When there are no vehicles ahead The vehicle travels at the speed set by the driver. The desired vehicle-to- vehicle distance can also be set by operating the vehicle-to-vehicle dis- tance control. Example of deceleration cruising When the vehicle ahead is driving slower than the set speed When a vehicle is detected running ahead of you, the system automati- cally decelerates your vehicle. When a greater reduction in vehicle speed is necessary, the system applies the brakes. A warning tone warns you when the system cannot decelerate sufficiently to prevent your vehicle from closing in on the vehicle ahead.
303
SIENNA_U (OM45477U)
2-4. Using other driving systems
Example of follow-up cruising When following a vehicle driving slower than the set speed The system continues follow-up cruising while adjusting for changes in the speed of the vehicle ahead in order to maintain the vehicle-to-vehicle dis- tance set by the driver. Example of acceleration When there are no longer any vehicles ahead driving slower than the set speed The system accelerates until the set speed is reached. The system then returns to constant speed cruising.
Approach warning
When your vehicle is too close to a vehicle ahead, and sufficient automatic deceleration via the cruise control is not possible, the dis- play will flash and the buzzer will sound to alert the driver. An exam- ple of this would be if another driver cuts in front of you while you are following a vehicle. Apply the brakes to ensure an appropriate vehi- cle-to-vehicle distance. ■ Warnings may not occur when
In the following instances, there is a possibility that the warnings will not occur: ● When the speed of the vehicle ahead matches or exceeds your
vehicle speed
● When the vehicle ahead is traveling at an extremely slow speed ● Immediately after the cruise control speed was set ● At the instant the accelerator is applied
304
SIENNA_U (OM45477U)
2
2-4. Using other driving systems
Selecting conventional constant speed control mode
Constant speed control mode differs from vehicle-to-vehicle distance control mode. When constant speed control mode is selected, your vehicle will maintain a set speed regardless of whether or not there are other vehicles in the lane ahead.
Press the “ON-OFF” button to activate the cruise control. Dynamic radar cruise control indi- cator will come on. Press the button again to deacti- vate the cruise control. Switch to constant speed con- trol mode. (Push the lever forward and hold for approximately one second) Constant speed control mode indicator will come on. When in constant speed control mode, to return to vehicle-to-vehi- cle distance control mode, push the lever forward again and hold for approximately 1 second. After the desired speed has been set, it is not possible to return to vehicle-to-vehicle distance con- trol mode.
305
SIENNA_U (OM45477U)
return
Vehicles without a smart key sys-
tem:
If the engine switch is turned off
and then turned to the “ON” posi-
tion again, the vehicle will auto-
matically
to vehicle-to-
vehicle distance control mode.
Vehicles with a smart key system:
If the “ENGINE START STOP”
switch is turned off and then
turned to IGNITION ON mode
again, the vehicle will automati-
cally return to vehicle-to-vehicle
distance control mode.
Adjusting the speed setting:
→P. 300
Canceling and
speed setting: →P. 302
resuming
the
2-4. Using other driving systems
306
SIENNA_U (OM45477U)
2-4. Using other driving systems
■Dynamic radar cruise control can be set when
●The shift lever is in the D or more than range 4 of S has been selected. ●Vehicle speed is above approximately 30 mph (50 km/h).
■Accelerating after setting the vehicle speed
The vehicle can accelerate normally. After acceleration, the set speed resumes. However, during vehicle-to-vehicle distance control mode, the vehicle speed may decrease below the set speed in order to maintain the distance to the vehicle ahead.
■Automatic cancelation of vehicle-to-vehicle distance control
Vehicle-to-vehicle distance control driving is automatically canceled in the following situations: ●Actual vehicle speed falls below approximately 25 mph (40 km/h). ●Enhanced VSC is activated. ●The sensor cannot operate correctly because it is covered in some way. ●The windshield wipers are operating at high speed (when the wiper switch is set to the “AUTO” mode or the high speed wiper operation posi- tion).
If vehicle-to-vehicle distance control driving is automatically canceled for any other reason, there may be a malfunction in the system. Contact your Toyota dealer.
307
SIENNA_U (OM45477U)
2-4. Using other driving systems
■Automatic cancelation of constant speed control
The cruise control will stop maintaining the vehicle speed in the following sit- uations. ●Actual vehicle speed is more than approximately 10 mph (16 km/h)
below the set vehicle speed. At this time, the memorized set speed is not retained.
●Vehicle speed falls below approximately 25 mph (40 km/h). ●Enhanced VSC is activated.
■Radar sensor and grille cover
Always keep the sensor and grille cover clean to ensure that the vehicle-to- vehicle distance control operates properly. (Some obstructions, such as snow, ice and plastic objects, cannot be detected by the obstruction sensor.) Dynamic radar cruise control is canceled if an obstruction is detected.
Grille cover Radar sensor
■Warning lights for dynamic radar cruise control
Warning light is used to indicate a system malfunction or to inform the driver of the need for caution while driving. (→P. 729)
308
SIENNA_U (OM45477U)
2
2-4. Using other driving systems
■Certification
U.S.A. FCC ID: HYQDNMWR005 This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interfer- ence, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC WARNING Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Radiofrequency radiation exposure Information: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance of 20 cm between the radiator (antenna) and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Canada Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, includ- ing interference that may cause undesired operation of the device.
309
SIENNA_U (OM45477U)
2-4. Using other driving systems
CAUTION
■Before using dynamic radar cruise control