2005 Toyota Sienna Owners Manual

ture, push this switch again.

4. “SCAN” switch (audio CD and CD text) Push the “SCAN” switch. The player will scan all the tracks on the disc. To stop scanning, push this switch again. When the player has scanned all the tracks on the disc, it will stop scan- ning.

5. “

” and “

” switches

” or “

Push the “ ” switch to fast forward or reverse the disc. When you push the switch again, the DVD player will resume playing.

You can adjust the color, contrast, tone and brightness of the screen. Push the “DISPLAY” button on the control- ler and then the “Display” screen will ap- pear. The screen may turn purple to deflect the sunlight. This is not a malfunction.

293

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

After adjusting the screen, push the “OK” switch to return to the previous screen.

—Selecting the video mode

Each time you push the “+” or “−” switch, you can adjust the color, contrast, tone and brightness of the screen.

+ or “GREEN”

Strengthens the green color Strengthens the contrast

− or “RED”

Strengthens the red color Weakens the contrast

Strengthens the tone

Weakens the tone

COLOR

CONTRAST

TONE

BRIGHTNESS Brightens

Darkens

294

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

The audio machine connected to the input terminal adapter can be played the video mode. To select the “VIDEO” button on the controller. You can also select the video mode on the mode selection screen mentioned above.

the video mode, push

in

05 SIENNA_U (L/O 0409)

—DVD video disc information DVD PLAYER AND DVD VIDEO DISCS This DVD player conforms to NTSC col- or TV formats. DVD video discs con- forming to other formats such as PAL or SECAM cannot be used. Region codes: Some DVD video discs have a region code indicating where you can use. If the DVD video disc is not labeled “ALL” or “1”, you cannot use it in this DVD player. If you attempt to play an inappropriate DVD video disc in this play- er, “REGION CODE ERROR” appears on the screen. Even if the DVD video disc does not have a region code, in some cases you cannot use it.

Marks shown on DVD video discs:

Indicates NTSC format of color TV.

Indicates the number of audio tracks.

Indicates the number of language subtitles.

Indicates the number of angles.

Indicates the screen to be selected. Wide screen: 16:9
Standard: 4:3

Indicates regions in which this video disc can be played. ALL: all countries Number: region code

295

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

DVD VIDEO DISC GLOSSARY DVD video discs: Digital Versatile Disc that holds video. DVD video discs have adopted “MPEG2”, one of the world stan- dards of digital compression technologies. The picture data is compressed by 1/40
on average and stored. Variable rate en- coded technology in which the volume of data assigned to the picture is changed depending on the picture format has also been adopted. Audio data is stored using PCM and Dolby digital, which enables higher quality of sound. Furthermore, mul- ti−angle and multi−language features will also help you enjoy the more advanced technology of DVD video. Viewer restrictions: This limits what can be viewed in conformity with the level of restrictions of the country. The level of restrictions varies depending on the DVD video disc. Some DVD video discs cannot be played at all, or violent scenes are skipped or replaced with other scenes. Level 1: DVD video discs for children can be played. Level 2—7: DVD video discs for children and G−rated movies can be played.

feature

Level 8: All types of DVD video discs can be played. Multi−angle feature: You can enjoy the same scene at different angles. Multi−language feature: You can select the language of the subtitles and audio. Region codes: Region codes are provided on DVD players and DVD discs. If the DVD video disc does not have the same region code as the DVD player, you can- not play the disc on the DVD player. For region codes, see page 295. Audio: This DVD player can play liner PCM, Dolby digital, dts and MPEG audio format DVD. Other decoded type cannot be played. Title and chapter: Video and audio pro- grams stored on DVD video discs are di- vided in parts by title and chapter. Title: The largest unit of the video and audio programs stored on DVD video discs. Usually, one piece of a movie, one album, or one audio program is assigned as a title. Chapter: A unit smaller than a title. A title comprises plural chapters.

296

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, and the double−D symbol are trademarks of Dolby Laboratories. Confidential unpub- lished works. E1992−1997 Dolby Laboratories. All rights reserved. incorporates copyright This product protection technology that is protected by method claims of certain U.S. pat- ents and other intellectual property rights owned by Macrovision Corpora- tion and other rights owners. Use of this copyright protection technology must be authorized by Macrovision Cor- poration, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision Corporation. Reverse engineering or disassembly is prohibited. “dts” is a trademark of Digital Theater Systems, Inc.

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

—Power outlet

—Input terminal adapter The rear entertainment system plays vid- eos and sound when your audio system is connected to the input terminal adapter. For details, refer the manufacturer’s instructions.

to

To use the input terminal adapter, open the cover. The input terminal adapter is composed of 3 input terminal adapters. Yellow: Image input adapter Red: Audio input adapter White: Audio input adapter

NOTICE

Close the input terminal adapter cover when the input terminal adapter is not in use. Inserting a foreign object oth- er than the appropriate plug that fits the adapter may cause electrical fail- ure or short circuit.

This power outlet is designed for use as a power supply for the audio device con- nected to the input terminal adapter. The key must be in the “ON” position for the power outlet to be used. The maximum capacity for this power out- let is 115 VAC/100W. If you attempt to use an appliance that requires more than 115 VAC or 100W, the protection circuit will activate and cut the power supply. The power supply will restart automatically when you use an appliance that operates within the 115 VAC/100W limits.

297

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

NOTICE

z To prevent the battery from being discharged, do not use the power outlet longer than necessary when the engine is not running.

z Close the power outlet lid when the power outlet is not in use. Inserting a foreign object other than the ap- propriate plug that fits the outlet may cause electrical failure or short circuit.

The power outlet is not designed for the following electric appliances even if their power consumption is under 115
VAC/100W. These appliances may not operate properly. D Appliances with high initial peak watt- age: cathode−ray tube type televisions, compressor−driven refrigerators, electric pumps, electric tools, etc.

D Measuring devices which process pre- cise data: medical equipment, measur- ing instruments, etc.

To use the power outlet, push the main switch on the instrument panel. An indicator light will illuminate to indicate that the power outlet is ready for use. Push the main switch once again to turn the power outlet off. When the power out- let is not in use, make sure that the main switch is turned off.

298

D Other appliances requiring an extremely stable power supply: microcomputer− controlled electric blankets, touch sen- sor lamps, etc.

Certain electrical appliances may cause radio noise.

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

—Headphone input jacks

CAUTION

Adjust the volume when you connect the headphones jack. Loud sounds may have a significant impact on the human body.

the

to

You can enjoy the rear seat entertain- ment system with commercial head- phones. To use the headphones, connect them to the jack. The key must be in the “ACC” or “ON” position.

To adjust the volume of the headphones, turn the dial. Left side dial: Turn it upward to increase the volume, turn it downward to decrease the volume. Right side dial: Turn it downward to in- crease the volume, turn it upward to de- crease the volume. The maximum volume depends on type of headphones. The recommended headphone impedance is from 16 Ω to 32 Ω. Please contact your Toyota dealer for fur- ther details.

the

299

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

Audio/video system operating hints

NOTICE

To ensure correct audio/video system operation: z Be careful not to spill beverages

over the system.

z Do not put anything other than a cassette tape or Compact Disc into the slot.

z Do not put anything other than a DVD video, DVD audio, video CD, dts−CD or audio CD into the DVD player.

z The use of a cellular phone inside or near the vehicle may cause a noise from the speakers of the sys- tem which you are to. However, this does not indicate a malfunction.

listening

RADIO RECEPTION Usually, a problem with radio reception does not mean there is a problem with your radio—it is just the normal result of conditions outside the vehicle.

300

reception

In addition,

For example, nearby buildings and terrain can interfere with FM reception. Power lines or telephone wires can interfere with AM signals. And of course, radio signals have a limited range. The farther you are from a station, the weaker its signal will be. conditions change constantly as your vehicle moves. Here are some common reception prob- lems that probably do not indicate a prob- lem with your radio: FM Fading and drifting stations—Generally, the effective range of FM is about 40 km (25
miles). Once outside this range, you may notice fading and drifting, which increase with the distance from the radio transmit- ter. They are often accompanied by distor- tion. Multi−path—FM reflective, making it possible for two signals to reach your antenna at the same time. If this happens, the signals will cancel each oth- er out, causing a momentary flutter or loss of reception.

signals are

listening to

Static and fluttering—These occur when signals are blocked by buildings, trees, or other large objects. Increasing the bass level may reduce static and fluttering. the FM signal you Station swapping—If are interrupted or weak- is ened, and there is another strong station nearby on the FM band, your radio may tune in the second station until the origi- nal signal can be picked up again. AM Fading—AM broadcasts are reflected by the upper atmosphere—especially at night. These reflected signals can interfere with those received directly from the radio sta- tion, causing the radio station to sound alternately strong and weak. Station interference—When a reflected sig- nal and a signal received directly from a radio station are very nearly the same frequency, interfere with each other, making it difficult to hear the broad- cast. Static—AM is easily affected by external sources of electrical noise, such as high tension power lines, lightening, or electri- cal motors. This results in static.

they can

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

CARING FOR YOUR CASSETTE PLAYER AND TAPES For the best performance for your cas- sette player and tapes: Clean the tape head and other parts regu- larly. D A dirty

tape head or tape path can decrease sound quality and tangle your cassette to clean them is by using a cleaning tape. (A wet type is recommended.)

tapes. The easiest way

Use high−quality cassettes. D Low−quality cassette tapes can cause many problems, including poor sound, inconsistent and constant auto−reversing. They can also get stuck or tangled in the cassette player.

playing

speed,

D Do not use a cassette if it has been damaged or tangled or if its label is peeling off.

D Do not leave a cassette in the player if you are not listening to it, especially if it is hot outside.

D Store cassettes in their cases and out

of direct sunlight.

05 SIENNA_U (L/O 0409)

CAUTION

Compact disc players and DVD play- ers use an invisible laser beam which could cause hazardous radiation ex- posure if directed outside the unit. Be sure to operate the players correctly.

D Avoid using cassettes with a total play- ing time longer than 100 minutes (50
minutes per side). The tape used in these cassettes is thin and could get stuck or tangled in the cassette player. CARING FOR YOUR COMPACT DISC PLAYER, DVD PLAYER AND DISCS D Extremely high temperatures can keep your compact disc player and DVD player from working. On hot days, use the air conditioning to cool the vehicle interior before you use the players.

D Bumpy roads or other vibrations may make your compact disc player and DVD player skip.

D If moisture gets into your compact disc the players player and DVD player, may not play even though they appear to be working. Remove the disc from the player and wait until it dries.

301

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

Audio CDs

DVD video discs

DVD audio discs

Video CDs

DVD player D Use only discs marked as shown above. The following products may not be playable on your DVD player. SACD Copy−protected CD CD−R (CD−Recordable) CD−RW (CD−Re−writable) CD−ROM DVD−R DVD+R DVD+RW DVD−RW DVD−ROM DVD−RAM

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

Compact disc player D Use only compact discs marked as shown above. The following products may not be playable on your compact disc player. SACD dts−CD Copy−protected CD CD−R (CD−Recordable) CD−RW (CD−Re−writable) CD−ROM

302

05 SIENNA_U (L/O 0409)

NOTICE

Do not use special shaped, transpar- ent/translucent, low quality or labeled discs such as those shown in the il- lustrations. The use of such discs may damage the player or changer, or it may be the disc.

impossible

to eject

Special shaped discs

Low quality discs

Transparent/translucent discs

Labeled discs

303

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

To clean a disc: Wipe it with a soft, lint− free cloth that has been dampened with water. Wipe in a straight line from the center to the edge of the disc (not in circles). Dry it with another soft, lint−free cloth. Do not use a conventional record cleaner or anti−static device.

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

Correct

Wrong

D Handle

the discs carefully, especially when you are them. Hold them on the edge and do not bend them. Avoid getting fingerprints on them, particularly on the shiny side.

inserting

D Dirt, scratches, warping, pin holes, or other disc damage could cause the player to skip or to repeat a section of a chapter or track. (To see a pin hole, hold the disc up to the light.)

D Remove discs from the compact disc player when you are not playing them. Store them in their plastic cases away from moisture, heat, and direct sun- light.

304

05 SIENNA_U (L/O 0409)

SECTION 1− 9

OPERATION OF INSTRUMENTS AND CONTROLS Air conditioning system Front manual air conditioning system

Controls Air flow selector settings Operating tips

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

306
309
309

Front automatic air conditioning system

Controls Air flow selector settings Operating tips

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Side vents Rear manual air conditioning system

312
315
315
317

Controls Air flow selector settings

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

318
319

Rear automatic air conditioning system

Controls Air flow selector settings

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Air conditioning filter

320
322
322

305

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

Front manual air conditioning system— —Controls

05 SIENNA_U (L/O 0409)

1. “A/C” button 2. Air intake selector 3. Air flow selector 4. Temperature selector 5. Fan speed selector

306

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

Fan speed selector Turn the knob to adjust the fan speed—to the right to increase, to the left to de- crease. Temperature selector Turn the knob to adjust the temperature— to the right to warm, to the left to cool.

This position allows the air intake to select FRESH automatically. This is to clean up the front view more quickly. If you want to return the setting to RECIRCULATE mode, press the air in- take selector button once again. Press the “A/C” button for dehumidified heating or cooling. This setting clears the front view more quickly.

5. Windshield—Air flows mainly from the

Air flow selector Turn the knob to select the vents used for air flow. 1. Panel—Air panel vents.

instrument

flows

from

the

2. Bi−level—Air flows from both the floor vents and the instrument panel vents. 3. Floor—Air flows mainly from the floor

vents.

the

4. Floor/Windshield—Air

flows mainly floor vents and windshield

from vents. the Turning floor/windshield position the defogging function with the purpose of clearing the front view.

to turns on

flow selector

the air

to

flow selector

windshield vents. the Turning the air windshield position turns on the defog- ging function with the purpose of clear- ing the front view. This position allows the air intake to select FRESH automatically. This is to clean up the front view more quickly. If you want to return the setting to RECIRCULATE mode, press the air in- take selector button once again. Press the “A/C” button for dehumidified heating or cooling. This setting clears the front view more quickly.

For details about air flow selector settings, see “—Air flow selector settings” on page 309.

307

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

“A/C” button To turn on the air conditioning, press the “A/C” button. The “A/C” button indicator will come on. To turn the air conditioning off, press the button again.

Air intake selector Press the button to select the air source. 1. Recirculate—Recirculates the air inside

the vehicle.

2. Fresh—Draws outside air into the sys-

tem.

To prevent fogging up of the windshield, the air intake mode may change automati- cally to FRESH depending on the condi- tion of the air conditioning system.

308

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

—Air flow selector settings

05 SIENNA_U (L/O 0409)

—Operating tips D To cool off your Toyota after

it has been parked in the hot sun, drive with the windows open for a few minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly.

D Make sure the air intake grilles in front of the windshield are not blocked (by leaves or snow, for example).

D On humid days, do not blow cold air on the windshield. The windshield could fog up because of the difference in air temperature on the inside and outside of the windshield.

D Keep the area under the front seats clear to allow air to circulate through- out the vehicle.

for a minute

D On cold days, set the fan speed to high the intake ducts of snow or moisture. This can reduce the amount of fogging on the windows.

to help clear

D When driving on dusty roads, close all windows. If dust thrown up by the ve- hicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake selector be set to FRESH and the fan speed selector to any setting except “OFF”.

309

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

D If following another vehicle on a dusty road, or driving in windy and dusty conditions, it is recommended that the air intake selector be temporarily set to RECIRCULATE, which will close off the outside passage and prevent outside air and dust from entering the vehicle interior.

Heating For best results, set controls to:

Fan speed—Any setting except “OFF” Temperature—Towards WARM

(red zone)

Air intake—FRESH (outside air) Air flow—FLOOR Air conditioning—OFF

for a

few minutes. To keep

D For quick heating, select recirculated air the windows from fogging, select fresh af- ter interior has been warmed.

the vehicle

D Press the “A/C” button on for dehumidi-

fied heating.

D Choose floor/windshield air flow to heat the vehicle interior while defrosting or defogging the windshield.

310

05 SIENNA_U (L/O 0409)

Air conditioning For best results, set controls to:

Fan speed—Any setting except “OFF” Temperature—Towards COLD

(blue zone)

Air intake—FRESH (outside air) Air flow—PANEL Air conditioning—ON

D For quick cooling, select recirculated

air for a few minutes.

Ventilation For best results, set controls to:

Fan speed—Any setting except “OFF” Temperature—Towards COLD

(blue zone)

Air intake—FRESH (outside air) Air flow—PANEL Air conditioning—OFF

Defogging —The inside of the windshield For best results, set controls to:

Fan speed—Any setting except “OFF” Temperature—Towards WARM

(red zone) to heat; COLD (blue zone) to cool

Air flow—WINDSHIELD

Turning the air flow selector to the wind- shield or floor/windshield position turns on the defogging function with the purpose of clearing the front view. When turning the air flow selector to the windshield or floor/windshield position, the air intake selects FRESH automatically. This is to clean up the front view more quickly. Press for dehumidified heating or cooling. This setting clears the front view more quickly. D On humid days, do not blow cold air on the windshield—the difference be- tween the outside and inside tempera- tures could make the fogging worse.

the “A/C” button

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

Defrosting —The outside of the windshield For best results, set controls to:

Fan speed—Any setting except “OFF” Temperature—Towards WARM

Air flow—WINDSHIELD

(red zone)

Turning the air flow selector to the wind- shield or floor/windshield position turns on the defrosting function with the purpose of clearing the front view. When turning the air flow selector to the windshield or floor/windshield position, the air intake selects FRESH automatically. This is to clean up the front view more quickly. Press for dehumidified heating. This setting clears the front view more quickly. D To heat the vehicle interior while de- choose

the “A/C” button

windshield,

frosting floor/windshield air flow.

the

311

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

Front automatic air conditioning system— —Controls

1. Temperature selector (“TEMP”)

(with “SYNC” button indicator on—simultaneous setting on driver, front passenger and rear passenger sides) (with “SYNC” button indicator off—individual setting on driver side only)

2. Temperature selector (“PASS TEMP”) (individual setting on front passenger side only)

3. “A/C” button 4. “SYNC” button

(with button indicator on—simultaneous temperature setting ) (with button indicator off—individual temperature setting)

5. “MODE” button (air flow selector) 6. Windshield air flow button 7. Temperature selector (“REAR TEMP”) (individual setting on rear passenger side only)

8. Fan speed selector 9. Air intake selector 10. “OFF” button 11. “AUTO” button

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

312

“AUTO” button For automatic operation of the air condi- tioning, press the “AUTO” button. An indi- cator light will illuminate to show that the automatic operation mode has been se- lected. In the automatic operation mode, the air conditioning selects the most suitable fan speed, air flow, air intake and on−off of the air conditioning according to the tem- perature. When you adjust the temperature selector button to maximum cooling, “LO” will ap- pear on the display and the air intake mode will be automatically changed to RE- CIRCULATE. You may use manual controls if you want to select your own settings. Fan speed selector (de- Push crease) side of the button to adjust the fan speed. In the automatic operation mode, the fan speed is adjusted automatically unless you desire another fan speed mode.

(increase) or

the

”

”

“

“

05 SIENNA_U (L/O 0409)

“SYNC” button Push the button to change the mode of the temperature setting. With the indicator on—Simultaneous tem- perature setting With the indicator off—Individual temper- ature setting With the indicator on, the rear air condi- tioning is turned on. However, controls on the rear control panel cannot be used. To cancel this function, push the “SYNC” but- ton. For details about the rear air conditioning, see “Rear automatic air conditioning sys- tem” on page 320 in this Section. Temperature selectors To “ side. “LO” appears when you adjust to maxi- mum cooling, and “HI” appears when you adjust to maximum warming. —“TEMP” button With the “SYNC” button indicator on— This button changes the temperature on the driver side, front passenger side and rear passenger side simultaneously.

increase temperature, press ” side. To decrease it, press the “

the ”

the

the

“SYNC” button

This function will be cancelled when the “PASS TEMP” or “REAR TEMP” button is pushed. With indicator off—This button changes the temperature on the driver side only. —“PASS TEMP” button This button changes the temperature on the front passenger side only. —“REAR TEMP” button This button changes the temperature on the rear passenger side only when the rear air conditioning is turned on. For details about the rear air conditioning, see “Rear automatic air conditioning sys- tem” on page 320 in this Section. The temperature display changes between “_C” and “_F” when the unit of the outside temperature display is changed. (For de- tails, see “Multi−information display” on page 326 in Section 1−10.) “OFF” button Push the button to turn off the air condi- tioning system.

313

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

is pressed, air

this button from

this button once again returns

Windshield air flow button flows When the windshield vents and mainly turns on the defogging function with the purpose of clearing the front view. Pressing the air flow mode to the last one used. This button allows the air intake to select FRESH automatically. This is to clean up the front view more quickly. Press for dehumidified heating or cooling. This setting clears the front view more quickly. For details about air flow selector settings, see “—Air flow selector settings” on page 315.

the “A/C” button

Air intake selector Press the button to select the air source. 1. Recirculate—Recirculates the air inside

the vehicle.

2. Fresh—Draws outside air into the sys-

tem.

To prevent fogging up of the windshield, the air intake mode may change automati- cally to FRESH depending on the condi- tion of the air conditioning system. “A/C” button To turn on the air conditioning, press the “A/C” button. The “A/C” button indicator will come on. To turn the air conditioning off, press the button again.

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

the

to select

the “MODE” button

“MODE” button (air flow selector) Push vents used for air flow. In the automatic operation mode, the air flow mode is selected automatically among Panel, Bi−level, Floor and Floor/Windshield unless you desire another air flow mode. 1. Panel—Air instrument panel vents.

flows

from

the

2. Bi−level—Air flows from both the floor vents and the instrument panel vents. 3. Floor—Air flows mainly from the floor

vents.

4. Floor/Windshield—Air

flows mainly floor vents and windshield

the

from vents.

314

—Air flow selector settings

05 SIENNA_U (L/O 0409)

—Operating tips D To cool off your Toyota after

it has been parked in the hot sun, drive with the windows open for a few minutes. This vents the hot air, allowing the air conditioning to cool the interior more quickly.

D Make sure the air intake grilles in front of the windshield are not blocked (by leaves or snow, for example).

D On humid days, do not blow cold air on the windshield. The windshield could fog up because of the difference in air temperature on the inside and outside of the windshield.

D Keep the area under the front seats clear to allow air to circulate through- out the vehicle.

D On cold days, set the fan speed selec- tor to adjust the fan speed high for a minute to help clear the intake ducts of snow or moisture. This can reduce the amount of fogging on the windows. D When driving on dusty roads, close all windows. If dust thrown up by the ve- hicle is still drawn into the vehicle after closing the windows, it is recommended that the air intake selector be set to FRESH and the fan speed selector to any setting.

315

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

D If following another vehicle on a dusty road, or driving in windy and dusty conditions, it is recommended that the air intake selector be temporarily set to RECIRCULATE, which will close off the outside passage and prevent outside air and dust from entering the vehicle interior.

05 SIENNA_U (L/O 0409)

AUTOMATIC OPERATION

Air conditioning

Press in the “AUTO” button. Temperature—To the desired

temperature

MANUAL OPERATION For best results, set controls to: Heating

Fan speed—To the desired fan speed Temperature—Towards high temperature Air intake—FRESH (outside air) Air flow—FLOOR Air conditioning—OFF

for a

few minutes. To keep

D For quick heating, select recirculated air the windows from fogging, select fresh af- ter interior has been warmed.

the vehicle

Fan speed—To the desired fan speed Temperature—Towards low temperature Air intake—FRESH (outside air) Air flow—PANEL Air conditioning—ON

D For quick cooling, select recirculated

air for a few minutes.

Ventilation

Fan speed—To the desired fan speed Temperature—Towards low temperature Air intake—FRESH (outside air) Air flow—PANEL Air conditioning—OFF

D Press the “A/C” button on for dehumidi-

fied heating.

D Choose floor/windshield air flow to heat the vehicle interior while defrosting or defogging the windshield.

316

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

OPERATION FOR DEFOGGING The inside of the windshield For best results, set controls to:

OPERATION FOR DEFROSTING The outside of the windshield For best results, set controls to:

Side vents

Fan speed—To the desired fan speed Temperature—Towards high temperature to heat; low temperature to cool

Air flow—WINDSHIELD

the windshield air

Pressing flow button turns on the defogging function with the purpose of clearing the front view. When pressing the windshield air flow but- ton, the air intake selects FRESH auto- matically. This is to clean up the front view more quickly. Press for dehumidified heating or cooling. This setting clears the front view more quickly. D On humid days, do not blow cold air the windshield—the difference be- on tween the outside and inside tempera- tures could make the fogging worse.

the “A/C” button

Fan speed—To the desired fan speed Temperature—Towards high temperature Air flow—WINDSHIELD

the windshield air

Pressing flow button turns on the defrosting function with the purpose of clearing the front view. When pressing the windshield air flow but- ton, the air intake selects FRESH auto- matically. This is to clean up the front view more quickly. Press for dehumidified heating. This setting clears the front view more quickly. D To heat the vehicle interior while de- choose

the “A/C” button

windshield,

frosting floor/windshield air flow.

the

If air flow control is not satisfactory, check the side vents. The side vents may be opened or closed as shown.

317

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

Rear manual air conditioning system— —Controls

05 SIENNA_U (L/O 0409)

1. Fan speed selector (rear) 2. Air flow selectors 3. Temperature selector 4. Fan speed selector (front)

318

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

the system off and

the knob to the “OFF” position it cannot be

Fan speed selector (front) This selector knob is used to turn the rear air conditioning system on/off and adjust the fan speed. In the “REAR” position, you can operate the system by the rear controllers. Turn the knob to adjust the fan speed—to the right to increase, to the left to de- crease. Turning turns operated by the rear controllers. Fan speed selector (rear) When the front fan speed selector is in the “REAR” position, you can operate the rear fan speed selector. Turn the knob to adjust the fan speed—to the right to increase, to the left to de- crease. Temperature selector Turn tempera- ture—to the right to warm, to the left to cool.

the knob

to adjust

the

05 SIENNA_U (L/O 0409)

—Air flow selector settings

Air flow selectors Push the button to select the vents used for air flow. 1. Panel—Air flows from the roof panel

vents.

2. Bi−level—Air flows from both the roof

panel vents and floor vent.

3. Floor—Air flows from the floor vent.

319

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

Rear automatic air conditioning system— —Controls

05 SIENNA_U (L/O 0409)

1. “AUTO” button 2. Air flow selectors 3. Temperature selector (rear) 4. Fan speed selectors 5. “OFF” button 6. “REAR” button 7. Temperature selector (front)

320

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

“AUTO” button For automatic operation of the rear air conditioning, press the “AUTO” button. An indicator light will illuminate to show that the automatic operation mode has been selected. In the automatic operation mode, the air conditioning selects the most suitable fan speed and air flow according to the tem- perature. You may use manual controls if you want to select your own settings. Fan speed selectors Push the button to select the fan speed mode. In the automatic operation mode, the fan speed is adjusted automatically unless you desire another fan speed mode.

the

increase

temperature, press

Temperature selectors To the “Ɯ” side. To decrease it, press the “Ɲ” side. “LO” appears when you adjust to maxi- mum cooling, and “HI” appears when you adjust to maximum warming. When “SYNC” appears on the rear tem- perature display, rear controls cannot be used. Use the controls on the front control panel. To cancel this function, push the “SYNC” button. For details about the “SYNC” button, see “Front automatic air conditioning system” on page 312 in this Section. The temperature display changes between “_C” and “_F” when the unit of the outside temperature display is changed. (For de- tails, see “Multi−information display” on page 326 in Section 1−10.) “REAR” button To turn on the rear air conditioning system front control panel, push the using the button. To turn the button again. “OFF” button Push the button to turn off the rear air conditioning system.

it off, push

Air flow selectors Push the button to select the vents used for air flow. 1. Panel—Air flows from the roof panel

vents.

2. Bi−level—Air flows from both the roof

panel vents and floor vent.

3. Floor—Air flows from the floor vent.

321

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

—Air flow selector settings

Air conditioning filter—

The air conditioning filter information label is placed on the right side of the glove box as shown and indicates that a filter has been installed. The air conditioning filter prevents dust from entering the vehicle through the air conditioning vent.

The air conditioning filter is behind the glove box.

322

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

—Checking and replacing the air conditioning filter The air conditioning filter may clog af- ter long use. The filter may need to be replaced if the air flow of the air condi- tioning and heater experiences extreme reductions in operating efficiency, or if the windows begin to fog up easily. To maintain the air conditioning efficiency, inspect and replace the air conditioning filter according to the maintenance sched- ule. In dusty areas or areas with heavy traffic flow, such as inner city or desert areas, early replacement may be required. (For scheduled maintenance information, please refer the “Scheduled Mainte- nance Guide” or “Owner’s Manual Supple- ment”.)

to

1. Open the glove box, and slide off

the damper as shown.

2. Push in each side of the glove box

to disconnect the claws.

323

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

3. Remove the filter case from the filter

outlet as shown in the illustration.

4. Remove

case.

the

filter

from

the

filter

5. Inspect the filter on the surface. If it is dirty, it should be replaced.

INFORMATION

The air filter should be installed prop- erly in position. The use of air condi- tioning with filter removed may cause deteriorated dustproof per- formance and then affect air condi- tioning performance.

the air

324

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

SECTION 1− 10

OPERATION OF INSTRUMENTS AND CONTROLS Other equipment Multi−information display Clock Conversation mirror Toyota park assist system Rear view monitor system Power outlets Glove box Garage door opener box Auxiliary boxes Coin holder Cup holders Bottle holders Storage box Removable console box Note pad holder Front seat side table Coat hooks Grocery bag hooks Cargo net hooks Tie−down hooks Roof luggage carrier Sun shade Floor mat

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

326
337
338
339
347
350
352
353
355
358
359
361
361
362
366
367
368
369
370
371
371
372
373

325

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

Multi−information display—

05 SIENNA_U (L/O 0409)

1. “E/M” button 2. Garage door opener buttons 3. “MODE” button 4. Garage door opener indicator 5. Outside temperature and cruise

information display

6. Compass

326

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

the

the multi−information display

—Before using the multi−information display Operate with the ignition switch on. to When “ON”, the last previously used mode dis- played just before the ignition switch is turned off will appear. When lights are turned on, the brightness of the display will be reduced.

instrument panel

ignition switch

turned

the

is

05 SIENNA_U (L/O 0409)

“E/M” button This button is used to switch between English/U.S. Customary System and metric units. Each time you push this button, the display switches. This is also linked to the front and rear air conditioning displays. The display variations are as follows;

Indication

English/U.S. Customary System (E) Metric (M)

Outside

temperature

Instantaneous fuel consumption/

Average fuel consumption

Distance to empty

_F

_C

MPG

L/100 km

MI

km

327

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

“MODE” button This button is used to select the item. Every time you push the “MODE” button, the display toggles. For more details, see “—Outside tempera- ture and cruise information display” on page 331.

CAUTION

Do not adjust the display while the vehicle is moving. Be sure to adjust the display only when the vehicle is stopped.

328

05 SIENNA_U (L/O 0409)

—Garage door opener

The garage door opener ( Universal Transceiver) is manufactured under license from HomeLinkR and can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, and security systems, etc. (a) Programming the HomeLinkR The HomeLinkR in your vehicle has 3
buttons and you can store one program for each button. To ensure correct programming into the HomeLinkR, install a new battery in the hand−held to program- ming. The battery side of the hand−held trans- mitter must be pointed away the HomeLinkR during the programming pro- cess. For Canadian users, follow the procedure “Programming an entrance gate/Pro- in gramming all devices the Canadian market”.

transmitter prior

from

in

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

1. Decide which of 3 HomeLinkR buttons you want to program. Push and hold down one of the buttons until the indi- cator corresponding the selected to channel begins to flash.

2. Place your hand−held garage transmit- ter 25 to 75 mm (1 to 3 in.) away from the surface of the HomeLinkR.

Keep the indicator light on the HomeLinkR in view while programming. 3. Simultaneously press and hold

the hand−held garage transmitter button along with the selected HomeLinkR but- ton.

4. When

the

indicator

the HomeLinkR changes from a slow to a rapid flash after 20 seconds, you can release both buttons.

light on

5. Test the operation of the HomeLinkR by pressing the newly programmed button. If programming a garage door opener, check to see if the garage door opens and closes.

(on

light

indicator

If the garage door does not operate, iden- tify if your garage transmitter is of the “Rolling Code” type. Press and hold the programmed HomeLinkR button. The ga- rage door has the rolling code feature if the HomeLinkR) the flashes rapidly and then remains lit after 2 seconds. If your garage transmitter is the “Rolling Code” type, proceed to the heading “Programming a rolling code sys- tem”. 6. Repeat steps 2 through 5 for each re- maining HomeLinkR button to program another device.

it

is

to

is necessary

Programming a rolling code system “Rolling Code” If your device equipped, follow steps 1 through 4 under the heading “Programming the HomeLinkR” before proceeding with the steps listed below. 1. Locate the “training” button on the ceil- ing mounted garage door opener motor. The exact the button may vary by brand of garage door opener. Refer the owner’s guide supplied by the garage door opener manufacturer for the location of this “training” button.

location and color of

to

2. Press the “training” button on the ceil- ing mounted garage door opener motor. Following this step, you have 30 seconds in which to initiate step 3 below. 3. Press and release the vehicle’s pro- grammed HomeLinkR button twice. The garage door may open. the door does open, the programming process is complete. If the door does not open, press and release the button a third time. This third press and release will complete the programming process by opening the garage door.

If

now

should

recognize

The ceiling mounted garage door opener motor the HomeLinkR unit and be able activate the garage door up/down. 4. Repeat steps 1 through 3 for each re- maining HomeLinkR button to program another rolling code system.

329

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

Programming other devices To program other devices such as home security systems, home door locks or lighting, contact your authorized Toyota dealer for assistance. Reprogramming a button Individual HomeLinkR buttons cannot be erased, however, to reprogram a single button, follow the procedure “Programming the HomeLinkR”. (b) Operating the HomeLinkR the To operate appropriate HomeLinkR button to activate the programmed device. The HomeLinkR indicator light should come on. The HomeLinkR continues to send the signal for up the button is pressed.

the HomeLinkR, press

to 20 seconds as

long as

Programming an entrance gate/program- ming all devices in the Canadian market 1. Decide which of the 3 HomeLinkR but-

2. Place

your

tons you want to program. hand−held

gate/device transmitter 25 to 75 mm (1 to 3 in.) away the HomeLinkR.

surface

from

the

of

Keep the indicator light on the HomeLinkR in view while programming. 3. Press

selected

hold

and

the

HomeLinkR button.

4. Continuously press and release (cycle) the hand−held gate/device transmitter button every two seconds until step 5
is complete. the

the HomeLinkR changes from a slow to a rapid flash after 20 seconds, you can release both buttons.

light on

5. When

indicator

6. Test the operation of the HomeLinkR by pressing the newly programmed button. Check to see if the gate/device oper- ates correctly.

7. Repeat steps 1 through 6 for each re- maining HomeLinkR button to program another device.

330

(c) Erasing

the

entire HomeLinkR

memory (all three programs)

To erase all previously programmed codes at one time, press and hold down the 2
outside buttons for 20 seconds until the indicator light flashes. If you sell your vehicle, be sure to erase the HomeLinkR the programs stored memory.

in

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

—Outside temperature and cruise information display

received,

This device complies with Part 15 of the FCC Rules and with RSS−210 of the IC Rules. Operation is subject to the fol- lowing two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interfer- ence interference that may cause undesired operation. WARNING: This transmitter has been tested and complies with FCC and IC rules. Changes or modifications not expressly approved by the party re- sponsible for compliance could void the user’s authority to operate the device.

including

CAUTION

D When programming the HomeLinkR Universal Transceiver, you may be operating a garage door or other device. Make sure people and ob- jects are out of the way of the ga- rage door or other device to pre- vent potential harm or damage.

D Do not use this HomeLinkR Univer- sal Transceiver with any garage door opener that lacks the safety stop and reverse feature as re- quired by federal safety standards. (This includes any garage door opener model manufactured before April 1, 1982.) A garage door open- er which cannot detect an object (signaling the door to stop and re- verse), does not meet current feder- al safety standards. Using a garage door opener without these features increases risk of serious injury or death.

331

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

The outside temperature and cruise in- formation display indicates the follow- ing information. 1. Outside temperature 2. Average fuel consumption 3. Instantaneous fuel consumption 4. Distance to empty 5. Display off (no compass) Every time you push the “MODE” button, the display toggles through this informa- tion. During the off mode, the compass display is also turned off. The displayed values in the cruise infor- mation display indicate general driving conditions. Accuracy varies with driving habits and road conditions. To set the unit, push the “E/M” button until the desired unit display appears. (At this time, front and rear air conditioning displays also change.)

332

from

indi-

temperature

1. Outside temperature The outside temperature display cates the outside air temperature. The displayed value is updated every 1
second. The displayed ranges −30_C (−22_F) up to 50_C (122_F). If an abnormality exists in the connection of temperature sensor, “−−_C” (“−−_F”) will appear on the display. If “−−_C” (“−−_F”) appears on the display, contact your Toyota dealer. There may be a case that “−−_C” (“−−_F”) appears momentarily when the ignition is quickly turned to “ON”. It is normal if it goes out soon. 2. Average fuel consumption

the outside air

(“AVG”)

total

Average fuel consumption is calculated and displayed based on total driving distance and fuel consumption with the engine running. The displayed value is updated every 1
seconds. To reset the calculations, return the mode to “AVG” and push and hold the “MODE” and “E/M” button simultaneously for 2 sec- onds.

3. Instantaneous fuel consumption

(“INST”)

The instantaneous fuel consumption is calculated and displayed based on dis- tance and fuel consumption for 1 sec- onds with the engine running. The displayed value is updated every 2
seconds. Note that an accurate figure may not be shown in the following cases. D The vehicle is stopped with the engine running. (The display will indicate the extremely high fuel consumption.) is driving down a

long slope applying the engine brake. (The display will indicate the extremely low fuel consumption.)

D The vehicle

The calculation is reset when the ignition switch is turned off. 4. Distance to empty

(“DTE”)

fuel

The distance the vehicle can travel with the remaining is calculated and displayed based on the quantity of re- maining fuel and past fuel consumption. The displayed value is updated every 1
second.

2005 SIENNA from Sep. ’04 Prod. (OM45431U)

05 SIENNA_U (L/O 0409)

—Compass

Every time you refuel the vehicle, the cal- culation is reset. The actual driving range varies with driv- ing habits and road conditions. If fuel con- sumption is good, the driving range will be longer.