Login- Download PDF Manual
-
CAUTION
■Caution while driving
Keep the glove box closed. In the event of sudden braking or sudden swerv- ing, an accident may occur due to an occupant being struck by the open glove box or the items stored inside.
Coin holder (if equipped)
Open the lid.
319
3-4. Using the storage features
CAUTION
■Caution while driving
Coin holder and front console box
Keep the coin holder closed. Injuries may result in the event of an accident or sudden braking.
Front console box
Pull the knob up and lift the lid.
320
3-4. Using the storage features
Front console box
■When using the front console box lid as an armrest
Pull the knob up and slide the lid forward. If necessary, the console box lid can slide forward. Pull the lid forward by grasping the front of the lid. When the lid is forward, it cannot be lifted.
■Tray in the front console box
The tray slides forward or backward. The tray can be removed.
321
3-4. Using the storage features
Front console box
The box can be removed. Hanging file folders can be hung on the rails when the box is removed.
CAUTION
■Caution while driving
Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
322
Card holder
3-4. Using the storage features
Card holder
Pull the knob up and lift the lid.
CAUTION
■Caution while driving
Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
323
3-4. Using the storage features
Map holder
Center console
Map holder
Push the tab down to release the lock. Remove the lid. Stow the lid.
CAUTION
■Caution while driving
Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
324
3-4. Using the storage features
Map holder
Front console box
Pull the knob up and lift the lid.
CAUTION
■Caution while driving
Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
325
3-4. Using the storage features
Pen holder
Pen holder
Pull the knob up and lift the lid.
CAUTION
■Caution while driving
Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
326
Tissue pocket
3-4. Using the storage features
Tissue pocket
Pull the knob up and lift the lid.
CAUTION
■Caution while driving
Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
327
3-4. Using the storage features
Rear console box (if equipped)
Upper box
Rear console box
Push the knob and lift the lid.
Lower box
Pull the knob up and lift the upper box.
328
3-4. Using the storage features
Rear console box
■The separator can be used at either of two positions shown in the illus-
tration
Change the separator position.
■The separator can be stowed
Stow the separator to the lid.
■Back side tray
Open the upper box to use the back side tray.
329
3-4. Using the storage features
Rear console box
■The inside tray can be removed
Pull the tray up.
■When closing the rear console box lid
Close the rear console box by lifting the grip on the inside of the upper box.
330
3-4. Using the storage features
Rear console box and overhead console
CAUTION
■Caution while driving
Keep the console box closed. Injuries may result in the event of an accident or sudden braking.
■When opening/closing the lower box
Be careful not to get your hands or feet caught between the lower box and the upper box. Failure to do so may result in serious injury.
■When opening the lower box
Make sure that the upper box is locked. Items stored inside may fall out and cause injury.
Overhead console
The overhead console is useful for temporarily storing sunglasses and similar small items.
Type A
Push the knob forward to open the console.
331
3-4. Using the storage features
Type B
Overhead console
Push the knob forward to open the console.
CAUTION
■Caution while driving
Do not leave the overhead console open while driving. Items stored in it may fall out and cause injury.
332
3-4. Using the storage features
Cup holders
Cup holders
Front
Front console box
Pull the lid down.
Rear
333
3-4. Using the storage features
Rear console box (if equipped)
Cup holders
Attach the separator when using either console box as a cup holder.
Both cup holders cannot be used at the same time.
■Removing the cup holder (front)
Push the tab down to release the lock. Remove the lid. Stow the lid.
334
3-4. Using the storage features
Cup holders
Pull the cup holder up.
■Removing the separator (rear console box)
Inside
Pull the separator up.
Outside
Pull the separator up.
335
3-4. Using the storage features
Cup holders
■The position of the separator can be changed (rear console box)
Inside
Outside
Change the separator position.
Change the separator position.
■The separator can be adjusted (rear console box)
Adjust the separator.
336
3-4. Using the storage features
Cup holders and bottle holders
CAUTION
■Items unsuitable for the cup holder
Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury. If possible, cover hot drinks to prevent burns.
■When not in use
Front console box and rear console box (inside) cup holder: Keep the cup holders closed. Injuries may result in the event of an accident or sudden braking.
NOTICE
■Before sliding the second center seat to the most forward position
(vehicles with bench type second seat) Ensure that the cup holder on the front console box is closed.
Bottle holders
Front
337
3-4. Using the storage features
Bottle holders and auxiliary boxes
Rear
NOTICE
■Items that should not be stowed in the bottle holders
Put the cap on before stowing a bottle. Do not place open bottles in the bot- tle holders, or glasses and paper cups containing liquid. The contents may spill and glasses may break.
Auxiliary boxes
Front
Press the knob then pull the lid down.
338
3-4. Using the storage features
Auxiliary boxes
Rear
Pull the lid up.
Rear console box (if equipped)
Pull the lever up to release the lock. Pull the handle.
CAUTION
■Caution while driving
Keep the auxiliary boxes closed. Injuries may result in the event of an accident or sudden braking.
339
3-5. Using the other interior features Sun visors
■ Main visor
Forward position: Flip down. Side position: Flip down, unhook, and swing to the side. Side extender: Place in side position then slide backwards.
■ Sub visor (if equipped)
Flip down.
340
3-5. Using the other interior features Vanity mirrors
Vehicles without vanity light
Open the cover.
Vehicles with vanity light
Open the cover. The light turns on when the cover is opened. Adjust the brightness of the light.
341
3-5. Using the other interior features Clock
Adjusts the hours. Adjusts the minutes.
■For quicker adjustment of the clock
Hold down the M or H button continuously. This allows faster advancement of the minutes and hours.
■The clock is displayed when
The engine switch is in the ACC or ON position.
■When disconnecting and reconnecting battery terminals
The time display will automatically be set to 1:00.
342
3-5. Using the other interior features Outside temperature display
(Fahrenheit).
the outside air
Displays temperature. The temperature range that can be displayed is from -40°F (-40°C) to 122°F (50°C). the outside air Switches temperature display between °C (Celsius) and °F (if equipped) Vehicles without multi-informa- tion display: Push the SETUP button until the desired unit of measure- ment is displayed. Vehicles with multi-information display: With the customized unit- change operation for the multi- information display, the unit of measurement can be changed. (P. 184)
343
3-5. Using the other interior features
■When – –°C or – –°F is displayed
The system may be malfunctioning. Take your vehicle to your Toyota dealer.
■The outside air temperature is displayed when
The engine switch is in the ON position.
■When disconnecting and reconnecting battery terminals
The display will automatically be set to the initial mode.
■Display
In the following situations, the correct outside temperature may not be dis- played, or the display may take longer than normal to change. ●When stopped, or driving at low speeds (less than 16 mph [25 km/h]) ●When the outside temperature has changed suddenly (at the entrance/
exit of a garage, tunnel, etc.)
344
3-5. Using the other interior features Portable ashtray
The ashtray can be installed in a cup holder.
■The ashtray can be removed
Pull the ashtray up.
CAUTION
■When not in use
Keep the ashtray closed. Injuries may result in the event of sudden braking, sudden swerving or an accident.
■To prevent fire
●Fully extinguish matches and cigarettes before putting them in the ashtray,
and then make sure the ashtray is fully closed.
●Do not place paper or any other type of flammable object in the ashtray.
345
3-5. Using the other interior features Cigarette lighter
Push the cigarette lighter.
The cigarette lighter will pop up when it is ready for use.
■The cigarette lighter can be used when
The engine switch is in the ACC or ON position.
CAUTION
■To avoid burns or fires
●Do not touch the metal parts of the cigarette lighter. ●Do not hold the cigarette lighter down. It could overheat and cause a fire. ●Do not insert anything other than the cigarette lighter into the outlet.
346
3-5. Using the other interior features Conversation mirror
Push the lid.
The mirror can be adjusted by pushing the mirror edge.
CAUTION
■Caution while driving
Do not adjust the position of the mirror while driving. Doing so may lead to mishandling of the vehicle and an accident, resulting in death or serious injury.
347
3-5. Using the other interior features Power outlets
The power outlet can be used for a following component.
12 V: Accessories that run on less than 10 A. 120 V AC: Accessories that use less than 100 W. Instrument panel (12 V)
348
3-5. Using the other interior features
Inside the front console box (12 V)
Pull the knob up to release the lock. Lift the lid.
Back of the front console box (12 V)*1
*1: Vehicles without rear seat entertainment system
349
3-5. Using the other interior features
Back of the front console box (120 V AC)*2
Power outlet socket
Luggage compartment (12 V)
*2: Vehicles with rear seat entertainment system
■The power outlet can be used when
12 V The engine switch is in the ACC or ON position. 120 V AC The engine switch is in the ON position.
350
3-5. Using the other interior features
CAUTION
■Using a power outlet
Observe the following precautions to reduce the risk of injury. ●Use of the power outlet when it is wet with drinks or snow may result in electrical shocks and is extremely dangerous. The power outlet must be thoroughly dried before use.
●Do not allow children to use or play with the power outlet. ●Be careful not to get any part of your body caught in the power outlet lid. ●When using electrical appliances, strictly follow any cautions and notices
written on their labels and in the manufacturers’ instruction manuals.
●Do not modify, disassemble or repair the power outlet or its inverter, in any way. Doing so may result in unexpected malfunctions or accidents, which could cause serious damage or injuries. Contact a Toyota dealer for any necessary repairs.
■To prevent injuries and accidents, securely fix all electric appliances before use and do not use any appliances that may do any of the fol- lowing: ●Distract the driver while driving, or hamper safe driving. ●Result in a fire or burn injuries due to the appliance rolling, falling or over-
heating while driving.
●Emit steam, while the windows of the cabin are closed.
■To prevent unexpected accidents, such as electric shocks, do not per-
form any of the following. ●Using the power outlet for electric heaters while sleeping. ●Contaminating the power outlet with liquid substances or mud. ●Handling electrical appliance plugs at the power outlet with wet hands or
feet.
●Inserting foreign objects into the power outlet. ●Using malfunctioning electric appliances. ●Inserting inappropriate or badly fitting plugs into the power outlet.
351
3-5. Using the other interior features
NOTICE
■To avoid damaging the power outlet and the plug
●Close the power outlet lid when not in use. ●Foreign objects or liquids that enter the power outlet may cause a short
circuit.
●Do not use plug adaptors to connect too many plugs to the power outlet. ●After inserting a plug, gently close the power outlet lid.
■To prevent the fuse from being blown
12 V Do not use an accessory that uses more than 12 V 10 A. 120 V AC Do not use a 120 V AC appliance that requires more than 100 W. If a 120 V AC appliance that consumes more than 100 W is used, the pro- tection circuit will cut the power supply.
■Appliances that may not operate properly (120 V AC)
The following 120 V AC appliances may not operate even if their power con- sumption is under 100 W. ●Appliances with high initial peak wattage ●Measuring devices that process precise data ●Other appliances that require an extremely stable power supply
■To prevent the battery from being discharged
Turn off all the vehicle’s electronic equipment and accessories, such as the headlights and air conditioning, when electrical appliances that consume in excess of 100 W are used continuously for long periods of time.
■To prevent any damage caused by heat
●Do not use any electrical appliances that give off intense heat such as toasters, in any locations including the internal or external trim, seats and deck.
●Do not use any electrical appliances, which are easily affected by vibration
or heat, inside the vehicle. Vibration while driving, or the heat of the sun while parking, may result in damage to those electrical appliances.
352
3-5. Using the other interior features
NOTICE
■If any electrical appliances are to be used while driving
Securely fasten both the appliances and their cables to prevent them from falling or getting caught any of the power train components.
■If the power outlet is loose when an electrical appliance plug is con-
nected Replace the outlet. Contact a Toyota dealer for any necessary replacements.
■If the power outlet gets dirty
Turn the main switch off and use a soft, clean cloth to wipe it gently. Do not use any cleansing materials, such as organic solvents, wax, or com- pound cleaners, as these may damage the power outlet or cause it to mal- function.
353
3-5. Using the other interior features Seat heaters
■ Front seat
On The indicator comes on. Adjusts the seat tempera- ture. The further you turn the dial upward, the warmer the seat becomes.
354
: If equipped
3-5. Using the other interior features
■ Rear seat (vehicles with rear console box)
Press the LO or HI switch to warm the seats to a low or high temperature respectively.
High temperature The indicator (yellow) comes on. Low temperature The indicator (green) comes on.
■The seat heaters can be used when
The engine switch is in the ON position.
■When not in use
Front seat: Turn the dial fully downward. The indicator turns off. Rear seat (vehicles with rear console box): Push lightly on the opposite side. The indicator turns off.
355
3-5. Using the other interior features
CAUTION
■Burns
●Use caution when seating the following persons in a seat with the seat
heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled • Persons with sensitive skin • Persons who are fatigued • Persons who have taken alcohol or drugs that induce sleep (sleeping
drugs, cold remedies, etc.)
●Do not cover the seat with anything when using the seat heater.
Using the seat heater with a blanket or cushion increases the temperature of the seat and may lead to overheating.
NOTICE
■To prevent seat heater damage
Do not put unevenly weighted objects on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.
■To prevent battery discharge
Turn the switches off when the engine is not running.
356
3-5. Using the other interior features Seat heaters and ventilators
Blows air from the seats The indicator comes on. The higher the number, the stron- ger the airflow becomes. Heats the seats The indicator comes on. The higher the number, the warmer the seats become.
■The seat heaters can be used when
The engine switch is in the ON position.
■When not in use
Set the dial to 0. The indicator turns off.
: If equipped 357
3-5. Using the other interior features
CAUTION
■Burns
●Use caution when seating the following persons in a seat with the seat
heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled • Persons with sensitive skin • Persons who are fatigued • Persons who have taken alcohol or drugs that induce sleep (sleeping
drugs, cold remedies, etc.)
●Do not cover the seat with anything when using the seat heater.
Using the seat heater with a blanket or cushion increases the temperature of the seat and may lead to overheating.
NOTICE
■To prevent seat heater damage
Do not put unevenly weighted objects on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.
■To prevent battery discharge
Turn the switches off when the engine is not running.
358
3-5. Using the other interior features Armrests
Separated seat
Adjusting to the desired angle: Lower the armrest from the highest position to the lowest position. Raise the armrest to the desired angle. Unlock the armrest: Lift the armrest to raise it to the highest position.
Pull the armrest down for use.
Bench seat
NOTICE
■To prevent damage to the armrest
●Do not place too much strain on the armrest. ●Do not sit on the armrest.
: If equipped 359
3-5. Using the other interior features Rear side sunshades
Rear door window
Pull the tab up. Hook the sunshade onto the anchors. To lower the sunshade, pull the tab slightly the to unhook shade, and lower it slowly.
360
: If equipped
Rear quarter window
3-5. Using the other interior features
Pull the tab up. Hook the sunshade onto the anchors. To lower the sunshade, pull the tab slightly to unhook the shade, and lower it slowly.
NOTICE
■To ensure normal operation of the sunshade
Observe the following precautions. ●Do not place anything where it may hinder the opening/closing of the sun-
shade.
●Do not place anything on the sunshade.
361
3-5. Using the other interior features Assist grips
An assist grip (type A) installed on the ceiling can be used to sup- port your body while sitting on the seat. An assist grip (type B) installed on the pillar can be used when get- ting in or out of the vehicle and others.
Assist grip (type A) Assist grip (type B)
CAUTION
■Assist grip (type A)
Do not use the assist grip (type A) when getting in or out of the vehicle or ris- ing from your seat.
NOTICE
■To prevent damage to the assist grip
Do not hang any heavy object or put a heavy load on the assist grip.
362
3-5. Using the other interior features Floor mat
Use only floor mats designed specifically for vehicles of the same model and model year as your vehicle. Fix them securely in place onto the carpet.
the
Insert retaining hooks (clips) into the floor mat eye- lets.
Turn the upper knob of each retaining hook (clip) to secure the floor mats in place. *: Always align the
marks.
The shape of the retaining hooks (clips) may differ from that shown in the illustration.
363
3-5. Using the other interior features
CAUTION
Observe the following precautions. Failure to do so may cause the driver’s floor mat to slip, possibly interfering with the pedals while driving. An unexpectedly high speed may result or it may become difficult to stop the vehicle. This could lead to an accident, resulting in death or serious injury. ■When installing the driver’s floor mat
●Do not use floor mats designed for other models or different model year
vehicles, even if they are Toyota Genuine floor mats.
●Only use floor mats designed for the driver’s seat. ●Always install the floor mat securely using the retaining hooks (clips) pro-
vided.
●Do not use two or more floor mats on top of each other. ●Do not place the floor mat bottom-side up or upside-down.
■Before driving
●Check that the floor mat is securely fixed in the correct place with all the provided retaining hooks (clips). Be especially careful to perform this check after cleaning the floor.
●With the engine stopped and the shift lever in P, fully depress each pedal to the floor to make sure it does not inter- fere with the floor mat.
364
3-5. Using the other interior features Luggage compartment features
■ Tie-down hooks
Tie-down hooks are provided for securing loose items.
365
3-5. Using the other interior features
■ Cargo net hooks
To hang the cargo net, use the cargo net hooks.
The cargo net itself is not included as original equipment.
366
3-5. Using the other interior features
■ Shopping bag hooks
To hang shopping bags, use the shopping bag hooks.
367
3-5. Using the other interior features
■ Auxiliary boxes
Type A
Pull the lever upwards to lift the deck board.
Type B (if equipped)
Open the cover.
368
3-5. Using the other interior features
CAUTION
■When the tie-down hooks are not in use
To avoid injury, always return the tie-down hooks to their retracted positions when they are not in use.
■Caution while driving
Keep the auxiliary box closed. Injuries may result in the event of an accident or sudden braking.
369
3-5. Using the other interior features Garage door opener
The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, secu- rity systems, and other devices.
The garage door opener (HomeLink® Universal Transceiver) is manufac- tured under license from HomeLink®.
Programming the HomeLink® (for U.S.A. owners)
The HomeLink® compatible transceiver in your vehicle has 3 buttons which can be programmed to operate 3 different devices. Refer to the programming method below appropriate for the device.
Indicator Buttons
■ Programming the HomeLink
Point the remote control trans- mitter for the device 1 to 3 in. (25
to 75 mm) from the HomeLink® control buttons.the
indicator on
Keep the HomeLink® in view while pro- gramming.
370
: If equipped
3-5. Using the other interior features
Press and hold down one of the buttons on the HomeLink® and the button on the transmitter. When the HomeLink® changes from a slow to a rapid flash, you can release both buttons.
indicator on
the
If the HomeLink® indicator comes on but does not flash, or flashes rapidly for 2 seconds and remains the HomeLink® button is lit, the already programmed. Use other buttons or follow the “Reprogramming a HomeLink® button” instructions. (P. 373)
Test the operation of HomeLink® by pressing newly programmed button.
the the
the
hold
If programming a garage door opener, check to see if the garage door opens and closes. If the garage door does not operate, see if your garage transmitter is of the Rolling Code type. Press and programmed HomeLink® button. The garage door has the rolling code feature if the HomeLink®) flashes rapidly for 2
seconds and then remains lit. If your transmitter is the Rolling Code type, proceed to the head- ing “Programming a rolling code system”.indicator
(on
the
Repeat the steps above to program another device for each of the remaining HomeLink® buttons.
371
3-5. Using the other interior features
■ Programming a Rolling Code system (for U.S.A. owners)
If your device is Rolling Code equipped, follow the steps under the heading “Programming the HomeLink®” before proceeding with the steps listed below.
Locate the training button on the ceiling mounted garage door opener motor. The exact location and color of the button may vary by brand of garage door opener. Refer to the operation manual supplied with the garage door opener for the location of the training button. Press the training button. Following this step, you have 30 seconds in which to initiate step 3
below. Press and hold the vehicle’s programmed HomeLink® button for 2 seconds and release it. Repeat this step once again. The garage door may open. If the garage door opens, the programming process is complete. If the door does not open, press and release the button a third time. This third press and release will complete the programming process by opening the garage door. The ceiling mounted garage door opener motor should now recog- nize the HomeLink® transceiver and operate the garage door. Repeat the steps above to program another rolling code sys- tem for any of the remaining HomeLink® buttons.■ Programming an entry gate (for U.S.A. owners)/Programming
all devices in the Canadian market
Place your transmitter 1 to 3 in. (25 to 75 mm) away from the surface of the HomeLink®. Keep the indicator on the HomeLink® in view while programming. Press and hold the selected HomeLink® button. Repeatedly press and release (cycle) the device’s remote control button for two seconds each until step 4 is completed. When the indicator on the HomeLink® compatible transceiver start to flashing rapidly, release the buttons.
372
3-5. Using the other interior features
Test the operation of the HomeLink® by pressing the newly programmed button. Check to see if the gate/device operates correctly. Repeat the steps above to program another device for each of the remaining HomeLink® buttons.
■ Programming other devices
To program other devices such as home security systems, home door locks or lighting, contact your authorized Toyota dealer for assistance.
■ Reprogramming a button
The individual HomeLink® buttons cannot be erased but can be reprogrammed. To reprogram a button, follow the programming instructions.
Operating the HomeLink®
Press the appropriate HomeLink® button. The HomeLink® indicator on the HomeLink® transceiver should turn on.
The HomeLink® continues to send a signal for a maximum of 20 seconds as long as the button is pressed.
Reprogramming a HomeLink® button
Press and hold the desired HomeLink® button. After 20 seconds, the HomeLink® indicator light will start flashing slowly. Keep pressing the HomeLink® button and then follow the “Programming the HomeLink® (for U.S.A. owners)” instructions. (P. 370)
373
3-5. Using the other interior features
Erasing the entire HomeLink® memory (all three programs)
Press and hold down the 2 out- side buttons for 10 seconds until the indicator flashes.
If you sell your vehicle, be sure to erase the programs stored in the HomeLink® memory.
■Before programming
●Install a new battery in the remote control transmitter. ●The battery side of the remote control transmitter must be pointed away
from the HomeLink®.
■Certification for the garage door opener
For vehicles sold in the U.S.A. FCC ID: NZLWZLHL4
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any inter- ference received, including interference that may cause undesired opera- tion. FCC WARNING: Changes or modifications not expressly approved by the party responsi- ble for compliance could void the user’s authority to operate the equip- ment. For vehicles sold in Canada NOTE: This device complies with Industry Canada licence-exempt RSS stan- dard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.374
3-5. Using the other interior features
■When support is necessary
Visit on the web at www.homelink.com or call 1-800-355-3515.
CAUTION
■When programming a garage door or other remote control device
The garage door may operate, so ensure that people and objects are out of danger to prevent potential harm.
■Conforming to federal safety standards
Do not use the HomeLink® Compatible Transceiver with any garage door opener or device that lacks safety stop and reverse features as required by federal safety standards. This includes any garage door that cannot detect an obstruction object. A door or device without these features increases the risk of death or serious injury.
375
3-5. Using the other interior features Compass
The compass on the inside rear view mirror indicates the direction in which the vehicle is heading. ■ Operation
To turn the compass on or off, press the switch.
■ Displays and directions
Display
NE SE SW NW
Direction
North
Northeast
East
Southeast
South
Southwest
West
Northwest
376
: If equipped
3-5. Using the other interior features
Calibrating the compass
Samoa: 5 Guam: 8 Saipan: 8
The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle.
If you cross over a map boundary shown in illustration, the compass will deviate. To obtain higher precision or accurate calibration, refer to the following.
377
3-5. Using the other interior features
■ Deviation calibration
Stop the vehicle where it is safe to drive in a circle.
Press the switch until a number (1 to 15) appears on the com- pass display.
Press the switch, and referring to the map above, select the number of the zone where you are. If the direction is displayed several seconds after adjustment, the calibration is complete.
■ Circling calibration
When “C” appears on the dis- play, drive the vehicle at 5 mph (8 km/h) or less in a circle until a direction is displayed.
If there is not enough space to drive in a circle, drive around the block until the direction is dis- played.
378
3-5. Using the other interior features
■Conditions unfavorable to correct operation
The compass may not show the correct direction in the following conditions: ●The vehicle is stopped immediately after turning. ●The vehicle is on an inclined surface. ●The vehicle is in a place where the earth’s magnetic field is subject to interference by artificial magnetic fields (underground car park/parking lot, under a steel tower, between buildings, roof car park/parking lot, near an intersection, near a large vehicle, etc.).
●The vehicle has become magnetized.
(There is a magnet or metal object near the inside rear view mirror.)
●The battery has been disconnected. ●A door is open.
CAUTION
■While driving the vehicle
Do not adjust the display. Be sure to adjust the display only when the vehicle is stopped.
■When doing the circling calibration
Be sure to secure a wide space, and watch out for people and vehicles in the neighborhood. Do not violate any local traffic rules while performing circling calibration.
NOTICE
■To avoid the compass malfunctions
Do not place magnets or any metal objects near the inside rear view mirror. Doing this may cause a malfunction of the compass sensor.
■To ensure normal operation of the compass
●Do not perform circling calibration of the compass in a place where the earth’s magnetic field is subject to interference by artificial magnetic fields. ●During calibration, do not operate electric systems (moon roof, power win-
dows, etc.) as they may interfere with the calibration.
379
3-5. Using the other interior features
380
Maintenance and care
4-1. Maintenance and care Cleaning and protecting the vehicle exterior......... 382
Cleaning and protecting the vehicle interior.......... 3854-2. Maintenance Maintenance requirements.................. 388
General maintenance....... 391
Emission inspection and maintenance (I/M) programs.......................... 3944-3. Do-it-yourself maintenance
Do-it-yourself service precautions .................... 395
Hood ................................ 399
Engine compartment........ 400
Tires ................................. 415
Tire inflation pressure ...... 423
Wheels ............................. 427
Air conditioning filter......... 430
Wireless remote control battery............................ 433
Checking and replacing fuses .............................. 435
Light bulbs........................ 447381
4-1. Maintenance and care Cleaning and protecting the vehicle exterior
Perform the following to protect the vehicle and maintain it in prime condition.
● Working from top to bottom, liberally apply water to the vehicle body, wheel wells and underside of the vehicle to remove any dirt and dust. Wash the vehicle body using a sponge or soft cloth, such as a chamois.
● For hard-to-remove marks, use car wash soap and rinse thor-
oughly with water.
● Wipe away any water. ● Wax the vehicle when the waterproof coating deteriorates. If water does not bead on a clean surface, apply wax when the vehicle body is cool.
■Automatic car washes
●Fold the mirrors back before washing the vehicle. ●Brushes used in automatic car washes may scratch the vehicle surface
and harm your vehicle’s paint.
■High pressure car washes
Do not allow the nozzles of the car wash to come within close proximity of the windows. Before entering an automatic car wash, check that the fuel filler door on your vehicle is closed properly.
■Aluminum wheels
●Remove any dirt immediately by using a neutral detergent. Do not use hard brushes or abrasive cleaners. Do not use strong or harsh chemical cleaners. Use the same mild detergent and wax as used on the paint.
●Do not use detergent on the wheels when they are hot, for example after
driving for long distance in the hot weather.
●Wash detergent from the wheels immediately after use.
382
4-1. Maintenance and care
■Bumpers and side moldings
Do not scrub with abrasive cleaners.
CAUTION
■Caution about the exhaust pipe
Exhaust gasses cause the exhaust pipe to become quite hot. When washing the vehicle, be careful not to touch the pipe until it has cooled sufficiently, as touching a hot exhaust pipe can cause burns.
■Precaution regarding the Blind Spot Monitor
If the paint of the rear bumper is chipped or scratched, the system may mal- function. If this occurs, consult your Toyota dealer.
383
4-1. Maintenance and care
NOTICE
■To prevent paint deterioration and corrosion on the body and compo-
nents (aluminum wheels etc.) ●Wash the vehicle immediately in the following cases:
• After driving near the sea coast • After driving on salted roads • If you see coal tar or tree sap on the paint surface • If you see dead insects, insect droppings or bird droppings on the paint • After driving in an area contaminated with soot, oily smoke, mine dust,
iron powder or chemical substances
• If the vehicle becomes heavily soiled in dust or mud • If liquids such as benzene and gasoline are spilled on the paint surface
●If the paint is chipped or scratched, have it repaired immediately. ●To prevent the wheels from corroding, remove any dirt and store in a place
with low humidity when storing the wheels.
■Cleaning the exterior lights
●Wash carefully. Do not use organic substances or scrub with a hard brush.
This may damage the surfaces of the lights.
●Do not apply wax on the surfaces of the lights.
Wax may cause damage to the lenses. ■When using a high pressure car wash
Do not bring the nozzle tip close to boots (rubber or resin manufactured cover), connectors or the following parts. The parts may be damaged if they come into contact with high-pressure water.
• Traction related parts • Steering parts • Suspension parts • Brake parts
384
4-1. Maintenance and care Cleaning and protecting the vehicle interior
The following procedures will help protect your vehicle’s interior and keep it in top condition: ■ Protecting the vehicle interior
Remove dirt and dust using a vacuum cleaner. Wipe dirty sur- faces with a cloth dampened with lukewarm water.
■ Cleaning the leather areas
● Remove dirt and dust using a vacuum cleaner. ● Wipe any excess dirt and dust with a soft cloth dampened with
diluted detergent. Use a diluted water solution of approximately 5% neutral wool deter- gent.
● Wring out any excess water from the cloth and thoroughly
wipe off all remaining traces of detergent.
● Wipe the surface with a dry, soft cloth to remove any remain- ing moisture. Allow the leather to dry in a shaded and venti- lated area.
■ Synthetic leather areas
● Remove loose dirt using a vacuum cleaner. ● Apply a mild soap solution to the synthetic leather using a
sponge or soft cloth.
● Allow the solution to soak in for a few minutes. Remove the
dirt and wipe off the solution with a clean, damp cloth.
