2011 Toyota Highlander Owners Manual

STEP 2

Select the portable player to be used by either of the following methods, and select “Confirm” using a voice command or

a. Press the talk switch and say the name of the desired por-

table player.

b. Press the talk switch and say “List audio players”. When the name of the desired portable player is read aloud, press the talk switch.

335

3-3. Using the Bluetooth® audio system

STEP 3

Press the talk switch and say “From car” or “From audio”, and

select “Confirm” using a voice command or

Vehicles with smart key system: If “From car” is selected, the porta- ble player will be automatically connected whenever the “ENGINE START STOP” switch is in either ACCESSORY or IGNITION ON mode. Vehicles without smart key system: If “From car” is selected, the por- table player will be automatically connected whenever the engine switch is in either the “ACC” or “ON” position.

Changing the registered name of a portable player

STEP 1

Select “Change Name” using a voice command or

STEP 2

Select the name of the portable player to be changed by either of the following methods, and select “Confirm” using a

voice command or

a. Press the talk switch and say the name of the desired por-

table player.

b. Press the talk switch and say “List audio players”. When the name of the desired portable player is read aloud, press the talk switch.

STEP 3

Press the talk switch or select “Record Name” using

and say the new name.

STEP 4

Select “Confirm” using a voice command or

336

3-3. Using the Bluetooth® audio system

Listing the registered portable players

Select “List Audio Players” using a voice command or

. The

list of registered portable players will be read aloud. When listing is complete, the system returns to “BT Audio Setup”. Pressing the talk switch while the name of a portable player is being read aloud selects the portable player, and the following functions will become available: ● Selecting a portable player: “Select Audio Player” ● Changing a registered name: “Change Name” ● Deleting a portable player: “Delete Audio Player”

Changing the passkey

STEP 1

Select “Set Passkey” using a voice command or

STEP 2

Press the talk switch, say a 4 to 8-digit number, and select

“Confirm” using a voice command or

STEP 3

When the entire number to be registered as a passkey has

been input, press

again.

337

3-3. Using the Bluetooth® audio system

Deleting a registered portable player

STEP 1

Select “Delete Audio Player” using a voice command or

STEP 2

Select the portable player to be deleted by either of the follow- ing methods and select “Confirm” using a voice command or

a. Press the talk switch and say the name of the desired por-

table player.

b. Press the talk switch and say “List audio players”. When the name of the desired portable player is read aloud, press the talk switch.

If the portable player to be deleted is paired as a Bluetooth® phone, the registration of the mobile phone can be deleted at the same time. A voice guidance instruction to delete a mobile phone is heard.

STEP 3

Select “Confirm” using a voice command or

■The number of portable players that can be registered Up to 2 portable players can be registered in the system.

338

3-3. Using the Bluetooth® audio system Bluetooth® audio system setup

■ System setup items and operation procedures →P. 362

339

3-4. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) features∗

This system supports Bluetooth®, which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone. Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”. ■ Hands-free system quick guide STEP 1

Setting a cellular phone. (→P. 344) Adding an entry to the phonebook (Up to 20 names can be stored). (→P. 366) Dialing by inputting a name. (→P. 354)

STEP 2

STEP 3

340

∗: If equipped

3-4. Using the hands-free phone system (for cellular phone)

Title

Using the hands-free phone system ■ Operating the system using a voice

■ Using the hands-free phone system for

■ Menu list of the hands-free phone

command

the first time

system

Making a phone call ■ Dialing by inputting a number ■ Dialing by inputting a name ■ Speed dialing ■ When receiving a phone call ■ Transferring a phone call ■ Using the call history Setting a cellular phone ■ Registering a cellular phone ■ Selecting a cellular phone to be used ■ Changing a registered name ■ Listing the registered cellular phones ■ Deleting a cellular phone ■ Changing the passkey ■ Turning the hands-free phone

automatic connection on/off

Security and system setup ■ Setting or changing the PIN ■ Locking or unlocking the phone book ■ Setting voice guidance volume ■ Initialization Using the phone book ■ Adding a new phone number ■ Setting speed dials ■ Changing a registered name ■ Deleting registered data ■ Deleting speed dials ■ Listing the registered data

Page

P. 344

P. 353

P. 357

P. 362

P. 366

341

3-4. Using the hands-free phone system (for cellular phone)

■Conditions under which the system will not operate

●If using a cellular phone that does not support Bluetooth® ●If the cellular phone is switched off ●If you are outside service range ●If the cellular phone is not connected ●If the cellular phone's battery is low ●If the cellular phone is behind the seat or in the glove box or console box ●If metal is covering or touching the cellular phone

■When transferring ownership of the vehicle

Be sure to initialize the system to prevent personal data from being improp- erly accessed.

■Required profiles for the cellular phone

●HFP (Hands Free Profile) Ver. 1.0
●OPP (Object Push Profile) Ver. 1.1

■About Bluetooth®

Bluetooth is a registered trademark of Bluetooth SIG. Inc.

■Certification for the hands-free phone system

216J-C5ZZZ035

FCC ID: ACJ932C5ZZZ035
IC ID: MADE IN JAPAN This device complies with Part 15 of the FCC Rules and RSS-Gen of IC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired oper- ation.

342

3-4. Using the hands-free phone system (for cellular phone)

CAUTION

■FCC WARNING

Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radio Frequency Radiation Exposure. This equipment complies with FCC/ IC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF) Exposure rules. This equipment has very low levels of RF energy that it deemed to comply with- out maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and operated with at least 7.9 in. (20 cm) and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and ankles). This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

■Caution while driving

Do not use a cellular phone, or connect the Bluetooth® phone.

NOTICE

■To prevent damage to a cellular phone

Do not leave a cellular phone in the vehicle. The temperature inside may become high resulting in damage to the phone.

343

3-4. Using the hands-free phone system (for cellular phone) Using the hands-free phone system∗

■ Audio unit

Display A message, name, phone number, etc. is displayed.

Lower-case characters and special characters, such as an umlaut, cannot be dis- played.

Selects speed dials Selects items such as menu or number Turn: Selects an item Press: Inputs the selected item Bluetooth® connection con- dition and reception level

If “BT” is not displayed, the hands-free phone system cannot be used.

344

∗: If equipped

3-4. Using the hands-free phone system (for cellular phone)

■ Steering wheel telephone switches

■ Microphone

Volume The voice guidance volume cannot be adjusted by using this switch. On-hook switch Turns the hands-free sys- tem off/ends a call/refuses a call Off-hook switch Turns the hands-free sys- tem on/starts a call Talk switch Turns the voice command system on (press)/turns the voice command system off (press and hold)

345

3-4. Using the hands-free phone system (for cellular phone)

Operating the system using a voice command

By following voice guidance instructions output from the speaker, voice commands enable the operation of the hands-free phone sys-

tem without the need to check the display or operate

■ Operation procedure when using a voice command

Press the talk switch and follow voice guidance instructions.

■ Auxiliary commands when using a voice command

The following auxiliary commands can be used when operating the system using a voice command: “Cancel”: Exits the hands-free phone system “Repeat”: Repeats the previous voice guidance instruction “Go back”: Returns to the previous procedure “Help”: Reads aloud the function summary if a help comment is registered for the selected function

346

3-4. Using the hands-free phone system (for cellular phone)

Using the hands-free phone system for the first time

Before using the hands-free phone system, it is necessary to register a cellular phone in the system. The phone registration mode will be entered automatically when starting the system with no cellular phone registered. Follow the procedure below to register a cellular phone: STEP 1
The introductory guidance and phone name registration instructions are heard.

Press the off-hook switch or the talk switch.

STEP 2

Select “Pair Phone” using a voice command or

STEP 3

Register a phone name by either of the following methods.

a. Select “Record Name” using

, and say a name to be

registered.

b. Press the talk switch and say a name to be registered.

Voice guidance instruction to confirm the input is heard.

STEP 4

Select “Confirm” using a voice command or

347

3-4. Using the hands-free phone system (for cellular phone)

Registration to the hands-free phone system only

STEP 5

Select “Phone Only” using a voice command or

Registration to the hands-free phone system and Bluetooth® audio system at the same time

STEP 5

Select “Int. Audio (Internal audio)” using a voice command or

STEP 6

Select “Confirm” using a voice command or

A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the cellular phone is heard. STEP 7

Input the passkey into the cellular phone. Refer to the manual that comes with the cellular phone for the oper- ation of the phone.

Guidance for registration completion is heard.

348

3-4. Using the hands-free phone system (for cellular phone)

Menu list of the hands-free phone system

■ Normal operation

First menu

Second menu

Third menu

Operation detail

CallBack (Call back)

Redial

Dial by Number Dial by Name (Dial by name)

Phonebook

Add Entry Change Name Delete Entry Delete Speed Dial List Names Speed Dial (Set speed dial)

Dialing a number stored in the incoming call history

Dialing a number stored in the outgoing call history

Dialing by inputting a number

Dialing by inputting a name registered in the phone book

Adding a new number Changing a name in the phone book Deleting the phone book data

Deleting a registered speed dial

Listing the phone book data

Registering a speed dial

349

3-4. Using the hands-free phone system (for cellular phone)

First menu

Second menu

Third menu

Operation detail

Set PIN Phonebook Lock (Phone book lock) Phonebook Unlock (Phone book unlock)

Pair Phone

Change Phone Name (Change name)

Delete Phone

List Phones

Select Phone

Set Passkey Handsfree Power Guidance Vol- ume

Device Name

Reset Setting

Setting a PIN code

Locking the phone book

Unlocking the phone book

Registering the cellular phone to be used

Changing the registered name of a cellular phone

Deleting a registered cellular phone Listing the registered cellular phones Selecting a cellular phone to be used Changing the passkey Turning the Hands-free power on/off Setting voice guidance vol- ume Displaying a device’s infor- mation Initialization

Security

Setup (Setup)

Phone Setup

System Setup

350

3-4. Using the hands-free phone system (for cellular phone)

■ Using a short cut key

First menu

Second menu

Operation detail

Dial “XXX (name)”

Dial “XXX (number)” Phone book add entry

Phone book change name

Phone book delete entry Phone book set speed dial Phone book delete speed dial Phone book List names

Dialing a number registered in the phone book Dialing the input numbers

Adding a new number

Changing the name of a phone number in the phone book

Deleting phone book data

Registering a speed dial

Deleting a speed dial

Listing the phone book data

351

3-4. Using the hands-free phone system (for cellular phone)

■Automatic volume adjustment

When vehicle speed reaches 50 mph (80 km/h) or more, the volume auto- matically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less.

■When using a voice command

For numbers, say a combination of single digits from zero to nine, # (pound), ∗ (star), and + (plus). Say the command correctly and clearly.

■Situations that the system may not recognize your voice

●When driving on a rough road ●When driving at high speeds ●When air is blowing out of the vents onto the microphone ●When the air conditioning fan emits a loud noise

■Operations that cannot be performed while driving

●Operating the system with

●Registering a cellular phone to the system

■Changing the passkey

→P. 360

352

3-4. Using the hands-free phone system (for cellular phone) Making a phone call

■ Making a phone call

● Dialing by inputting a number

“Dial by Number”

● Dialing by inputting a name

“Dial by Name (Dial by name)”

● Speed dialing ● Dialing a number stored in the outgoing history

“Redial”

● Dialing a number stored in the incoming history

“CallBack (Callback)” ■ Receiving a phone call ● Answering the phone ● Refusing the call

■ Transferring a phone call ■ Using the call history

● Dialing ● Storing data in the phone book ● Deleting

Dialing by inputting a number

STEP 1

STEP 2

Press the talk switch and say “Dial by number”. Press the talk switch and say the phone number.

353

3-4. Using the hands-free phone system (for cellular phone)

STEP 3

Dial by one of the following methods: a. Press the off-hook switch. b. Press the talk switch and say “Dial”.

c. Select “Dial” using

Dialing by inputting a name

STEP 1

STEP 2

Press the talk switch and say “Dial by name”. Select a registered name to be input by either of the following methods: a. Press the talk switch and say a registered name. b. Press the talk switch and say “List names”. Press the talk

switch while the desired name is being read aloud.

STEP 3

Dial by one of the following methods: a. Press the off-hook switch. b. Press the talk switch and say “Dial”.

c. Select “Dial” using

Speed dialing

STEP 1

STEP 2

STEP 3

Press the off-hook switch. Press the preset button to which the desired number is regis- tered. Press the off-hook switch.

354

3-4. Using the hands-free phone system (for cellular phone)

When receiving a phone call

■ Answering a phone call Press the off-hook switch.

■ Refusing a phone call

Press the on-hook switch.

Transferring a phone call

A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the follow- ing methods:

a. Operate the cellular phone.

Refer to the manual that comes with the cellular phone for the oper- ation of the phone.

b. Press the off-hook switch*1. c. Press the talk switch and say “Call transfer”*2. *1: This operation can be performed only when transferring a call

from the cellular phone to the system during a call.

*2: While the vehicle is in motion, a call cannot be transferred from the system to the cellular phone. Also, this operation is invalid while dialing or receiving a call.

Using the call history

Follow the procedure below to use a number stored in the call history: Press the talk switch and say “Redial” (when using a number STEP 1
stored in the outgoing call history) or “Callback” (when using a number stored in the incoming call history).

355

3-4. Using the hands-free phone system (for cellular phone)

STEP 2

Select the number by either of the following methods: a. Say “Previous” or “Go back” until the desired number is dis-

played.

b. Select the desired number using

The following operations can be performed:

Dialing: Press the off-hook switch or select “Dial” using a voice

command or

Storing the number in the phone book: Select “Store” using a voice

command or

Deleting: Select “Delete” using a voice command or

■Call history

Up to 5 numbers can be stored in each of the outgoing and incoming call his- tory memories.

■When talking on the phone

●Do not talk at the same time as the other party. ●Keep the volume of the incoming voice down. Otherwise, voice echo will

increase.

356

3-4. Using the hands-free phone system (for cellular phone) Setting a cellular phone

Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for reg- istered cellular phones: ■ Functions and operation procedures To enter the menu for each function, follow the steps below using a

voice command or

● Registering a cellular phone

1. “Setup (Setup)” → 2. “Phone Setup” → 3. “Pair Phone”

● Selecting the cellular phone to be used

1. “Setup (Setup)” → 2. “Phone Setup” → 3. “Select Phone”

● Changing a registered name

1. “Setup (Setup)” → 2. “Phone Setup” → 3. “Change Phone Name (Change name)”

● Listing the registered cellular phones

1. “Setup (Setup)” → 2. “Phone Setup” → 3. “List Phones”

● Deleting a cellular phone

1. “Setup (Setup)” → 2. “Phone Setup” → 3. “Delete Phone”

● Changing the passkey

1. “Setup (Setup)” → 2. “Phone Setup” → 3. “Set Passkey” ● Turning the hands-free phone automatic connection on/off

1. “Setup (Setup)” → 2. “Phone Setup” → 3. “Handsfree Power”

Registering a cellular phone

Select “Pair Phone” using a voice command or

, and perform

the procedure for registering a cellular phone. (→P. 347)

357

3-4. Using the hands-free phone system (for cellular phone)

Selecting a cellular phone to be used

STEP 1

Select “Select Phone” using a voice command or

Pattern A

STEP 2

Select a cellular phone to be used by either of the following methods, and select “Confirm” using a voice command or

a. Press the talk switch and say the desired phone name. b. Press the talk switch and say “List phones”. While the name of the desired cellular phone is being read aloud, press the talk switch.

Pattern B

STEP 2

Select a cellular phone to be used using

Changing a registered name

STEP 1

Select “Change Phone Name (Change name)” using a voice

command or

STEP 2

Select the name of the cellular phone to be changed by either of the following methods: a. Press the talk switch and say the desired phone name, and

select “Confirm” using a voice command or

b. Press the talk switch and say “List phones”. While the desired phone name is being read aloud, press the talk switch.

c. Select the desired phone name using

358

3-4. Using the hands-free phone system (for cellular phone)

STEP 3

Press the talk switch or select “Record Name” using

and say a new name.

STEP 4

Select “Confirm” using a voice command or

Listing the registered cellular phones

Selecting “List Phones” using a voice command or

causes the

list of registered cellular phones to be read aloud. When listing is complete, the system returns to “Phone Setup”. Pressing the talk switch while the name of a cellular phone is being read selects the cellular phone, and the following functions will be available: • Selecting a cellular phone: “Select Phone” • Changing a registered name: “Change Name” • Deleting a cellular phone: “Delete Phone”

359

3-4. Using the hands-free phone system (for cellular phone)

Deleting a cellular phone

STEP 1

Select “Delete Phone” using a voice command or

STEP 2

Select a cellular phone to be deleted by either of the following methods and select “Confirm” using a voice command or

a. Press the talk switch and say the name of the desired cellu-

lar phone.

b. Press the talk switch and say “List phones”. While the name of the desired cellular phone is being read aloud, press the talk switch.

Changing the passkey

STEP 1

Select “Set Passkey” using a voice command or

STEP 2

Press the talk switch, say a 4 to 8-digit number, and select

“Confirm” using a voice command or

The number should be input 1 digit at a time. When the entire number to be registered as a passkey has

STEP 3

been input, press

again.

360

3-4. Using the hands-free phone system (for cellular phone)

Turning the hands-free phone automatic connection on/off

■ Turning off the automatic connection

STEP 1

Select “Handsfree Power” using a voice command or

STEP 2

Select “Turn off” using a voice command or

■ Turning on the automatic connection

STEP 1

Select “Handsfree Power” using a voice command or

STEP 2

Select “Turn on” using a voice command or

■The number of cellular phones that can be registered Up to 6 cellular phones can be registered in the system.

361

3-4. Using the hands-free phone system (for cellular phone) Security and system setup

To enter the menu of each setting, follow the steps below: ■ Security setting items and operation procedure

● Setting or changing the PIN (Personal Identification Number)

1. “Setup (Setup)” → 2. “Security” → 3. “Set PIN”

● Locking the phone book

1. “Setup (Setup)” → 2. “Security” → 3. “Phonebook Lock (Phone book lock)”

● Unlocking the phone book

1. “Setup (Setup)” → 2. “Security” → 3. “Phonebook Unlock (Phone book unlock)”

■ System setup items and operation procedure

● Setting voice guidance volume

1. “Setup (Setup)” → 2. “System Setup” → 3. “Guidance Vol- ume”

● Initialization

1. “Setup (Setup)” → 2. “System Setup” → 3. “Reset Settings”

can only be used for system setup operation.

Setting or changing the PIN

■ Setting a PIN

STEP 1

Select “Set PIN” using a voice command or

STEP 2

Enter a PIN using a voice command or

When using

, input the code 1 digit at a time.

362

3-4. Using the hands-free phone system (for cellular phone)

■ Changing the PIN

STEP 1

Select “Set PIN” using a voice command or

STEP 2

Enter the registered PIN using a voice command or

STEP 3

Enter a new PIN using a voice command or

When using

, input the code 1 digit at a time.

Locking or unlocking the phone book

STEP 1

Select “Phonebook Lock (Phone book lock)” or “Phonebook Unlock (Phone book unlock)” using a voice command or

STEP 2

Input the PIN by either of the following methods and select

“Confirm” using a voice command or

a. Press the talk switch and say the registered PIN.

b. Input a new PIN using

363

3-4. Using the hands-free phone system (for cellular phone)

Setting voice guidance volume

STEP 1

Select “Guidance Volume” using

STEP 2

Change the voice guidance volume.

To decrease the volume: Turn

counterclockwise.

To increase the volume: Turn

clockwise.

Initialization

STEP 1

Select “Reset Settings” and then “Confirm” using

STEP 2

Select “Confirm” using

364

3-4. Using the hands-free phone system (for cellular phone)

■Initialization

●The following data in the system can be initialized:

• Phone book • Outgoing and incoming call history • Speed dials • Registered cellular phone data • Security code

●Once the initialization has been completed, the data cannot be restored

to its original state.

■When the phone book is locked

The following functions cannot be used: ●Dialing by inputting a name ●Speed dialing ●Dialing a number stored in the call history ●Using the phone book

365

3-4. Using the hands-free phone system (for cellular phone) Using the phone book

To enter the menu of each setting, follow the steps below:

● Adding a new phone number

1. “Phonebook” → 2. “Add Entry”

● Setting speed dial

1. “Phonebook” → 2. “Speed Dial (Set speed dial)”

● Changing a registered name

1. “Phonebook” → 2. “Change Name”

● Deleting registered data

1. “Phonebook” → 2. “Delete Entry”

● Deleting speed dial

1. “Phonebook” → 2. “Delete Speed Dial”

● Listing the registered data

1. “Phonebook” → 2. “List Names”

Adding a new phone number

The following methods can be used to add a new phone number: ● Inputting a phone number by using a voice command ● Transferring data from the cellular phone

● Inputting a phone number using

● Selecting a phone number from the outgoing or incoming call his-

tory

■ Adding procedure

STEP 1

Select “Add Entry” using a voice command or

366

3-4. Using the hands-free phone system (for cellular phone)

STEP 2

Use one of the following methods to input a telephone num- ber:

Inputting a telephone number using a voice command

STEP2-1 Select “By Voice (By voice)” using a voice command

or

STEP2-2 Press the talk switch, say the desired number, and

select “Confirm” using a voice command.

Transferring data from the cellular phone

STEP2-1 Select “By Phone” and then “Confirm” using a voice

command or

STEP2-2 Transfer the data from the cellular phone.

Refer to the manual that comes with the cellular phone for the details of transferring data.

STEP2-3 Select the data to be registered by either of the fol-

lowing methods: a. Say “Previous” or “Next” until the desired data is displayed, and select “Confirm” using a voice command.

b. Select the desired data using

367

3-4. Using the hands-free phone system (for cellular phone)

Inputting a phone number using

STEP2-1 Select “Manual Input” using

STEP2-2 Input a phone number using

, and press

once again.

Input the phone number 1 digit at a time.

Selecting a phone number from outgoing or incoming call history

STEP2-1 Select “Call History” using a voice command or

STEP2-2 Select “Outgoing Call History (Outgoing)” or “Incom- ing Call History (Incoming)” using a voice command

or

STEP2-3 Select the data to be registered by either of the fol-

lowing methods: a. Say “Previous” or “Go back” until the desired data is displayed, and select “Confirm” using a voice command.

b. Select the desired data using

368

3-4. Using the hands-free phone system (for cellular phone)

STEP 3

Select the name to be registered by either of the following methods, and select “Confirm” using a voice command or

a. Press the talk switch and say the desired name.

b. Select “Record Name” using

, and say the desired

name.

STEP 4

Select “Confirm” using a voice command or

STEP 3

In firm” registers the newly added phone number as a speed dial.

, selecting “Speed Dial (Set speed dial)” instead of “Con-

Setting speed dials

STEP 1

Select “Speed Dial (Set speed dial)” using a voice command

or

STEP 2

Select data to be registered as a speed dial by either of the following methods: a. Press the talk switch, say the desired number, and select

“Confirm” using a voice command or

b. Press the talk switch, and say “List names”. While the desired name is being read aloud, press the talk switch,

and select “Confirm” using a voice command or

c. Select the desired data using

369

3-4. Using the hands-free phone system (for cellular phone)

STEP 3

Select a desired preset button, and register the data into speed dial by either of the following methods: a. Press the desired preset button, and select “Confirm” using

a voice command or

b. Press and hold the desired preset button.

Changing a registered name

STEP 1

Select “Change Name” using a voice command or

STEP 2

Select a name to be changed by either of the following meth- ods: a. Press the talk switch, say the desired name, and select

“Confirm” using a voice command or

b. Press the talk switch, and say “List names”. While the desired name is being read aloud, press the talk switch,

and select “Confirm” using a voice command or

c. Select the desired name using

STEP 3

Select “Record Name” with

or the talk switch.

STEP 4

Say a new name, and select “Confirm” using a voice com-

mand or

370

3-4. Using the hands-free phone system (for cellular phone)

Deleting registered data

STEP 1

Select “Delete Entry” using a voice command or

STEP 2

Select the data to be deleted by either of the following meth-

ods, and select “Confirm” using a voice command or

a. Press the talk switch, and say the name of the desired

phone number to be deleted.

b. Press the talk switch, say “List phones”. While the name of the desired phone number is being read aloud, press the talk switch.

Deleting speed dials

STEP 1

Select “Delete Speed Dial” using a voice command or

STEP 2

Press the preset button in which the desired speed dial is reg- istered, and select “Confirm” using a voice command or

371

3-4. Using the hands-free phone system (for cellular phone)

Listing the registered data

Selecting “List names” using a voice command causes a list of the registered data to be read aloud. When listing is complete, the system returns to “Phonebook”. Pressing the talk switch while the desired data is being read aloud selects the data, and the following function will become available. • Dialing: “Dial” • Changing a registered name: “Change Name” • Deleting an entry: “Delete Entry” • Setting a speed dial: “Speed Dial (Set speed dial)”

■Limitation of number of digits

A phone number that exceeds 24 digits cannot be registered.

372

3-5. Using the interior lights Interior lights list

Your Toyota is equipped with an illuminated entry system to assist in entering the vehicle. Owing to the function of the system, the lights shown in the following illustration automatically turn on/off accord- ing to the presence of the electronic key (vehicles with smart key system), whether the doors are locked/unlocked, whether the doors or glass hatch (if equipped) are opened/closed, the “ENGINE START STOP” switch mode and engine switch position.

Outer foot lights (vehicles with smart key system) Personal/interior lights (→P. 374) Engine switch light (vehicles without smart key system) Front door courtesy light Personal/interior light or interior light (→P. 374, 375) Interior light (→P. 375)

373

3-5. Using the interior lights

Personal/interior light main switch and personal/interior lights

Personal/interior light main switch

“OFF” The personal/interior lights and interior light can be individually turned on or off. Door position The personal/interior lights and interior light come on when a door or the glass hatch (if equipped) is opened. They turn off when the doors and glass hatch are closed. On The personal/interior lights and interior light cannot be individually turned off.

Personal/interior lights

Front

On/off

The illuminated entry system is activated even is turned off when the personal/inte- rior light main switch is in door position.

light

the

if

374

3-5. Using the interior lights

Personal/interior lights and interior light

Center (if equipped)

On/off

The illuminated entry system is activated even is turned off when the personal/inte- rior light main switch is in door position.

light

the

if

Interior light

Center (if equipped)

Rear

On Off The illuminated entry system is activated even is turned off when the personal/inte- rior light main switch is in door position.

light

the

if

■To prevent battery discharge

If the lights remain on when the door is not fully closed and the personal/inte- rior light main switch is in the door position, the lights will go off automatically after 20 minutes.

■Customization that can be configured at Toyota dealer

Settings (e.g. The time elapsed before lights turn off) can be changed. (Customizable features →P. 582)

375

3-6. Using the storage features List of storage features

Auxiliary boxes Overhead console Glove box Bottle holders Cup holders Side table Console box

376

3-6. Using the storage features

Glove box

CAUTION

■Items that should not be left in the storage spaces

Do not leave glasses, lighters or spray cans in the storage spaces, as this may cause the following when cabin temperature becomes high: ●Glasses may be deformed by heat or cracked if they come into contact

with other stored items.

●Lighters or spray cans may explode. If they come into contact with other stored items, the lighter may catch fire or the spray can may release gas, causing a fire hazard.

Glove box

Unlock with the master key (vehicles without smart key system) or mechanical key (vehicles with smart key sys- tem) the master key Lock with (vehicles without smart key system) or mechanical key (vehicles with smart key sys- tem) Open (pull lever)

■Power back door main switch (vehicles with power back door)

The power back door main switch is located in the glove box. (→P. 59)

CAUTION

■Caution while driving

Keep the glove box closed. Injuries may result in the event of an accident or sudden braking.

377

3-6. Using the storage features

Console box

Upper

Console box

Pull up the knob to release the lock. Lift the lid.

Lower

Push down the lever.

CAUTION

■Caution while driving

Keep the console box closed. Injuries may result in the event of an accident or sudden braking.

378

3-6. Using the storage features

Overhead console

Overhead console

The overhead console is useful for temporarily storing sunglasses and similar small items.

Press in the lid.

CAUTION

■Caution while driving

Do not leave the overhead console open while driving. Items stored in it may fall out and cause injury.

■Size of stored items

Do not put large items in the overhead console. The overhead console may not be able to be shut from the conversation mir- ror position.

■Maximum storage weight

Do not place any object heavier than 0.4 lb. (200 g) in it. The console may be opened and cause injury.

379

3-6. Using the storage features

Cup holders

Front (type A)

Cup holders

Front (type B)

Lift the lid.

Console box

Pull out the cup holder.

380

Side table

Rear

3-6. Using the storage features

Cup holders

Install the side table before using the cup holder. (→P. 387) Removing the adapters changes the size. (→P. 382)

Removing the adapters changes the size. (→P. 382)