2010 Toyota Highlander Owners Manual

An XM® Satellite Radio is a tuner designed exclusively to receive broadcasts provided under a separate subscription. Availability is limited to the 48 con- tiguous states and 10 Canadian provinces. ●XM® subscriptions

For detailed information about XM® Satellite Radio or to subscribe: U.S.A. ⎯ Visit on the web at www.xmradio.com or call 1-800-967-2346. Canada ⎯ Visit on the web at www.xmradio.ca or call 1-877-438-9677.

●Radio ID

You will need the radio ID when activating XM® service or reporting a

problem. Select “CH000” using

, and the receiver's 8-character ID

number will appear.

●Satellite tuner

The tuner supports only Audio Services (Music and Talk) and the accom- panying Text Information of XM® Satellite Radio.

287

3-2. Using the audio system

■If the satellite radio does not operate normally (type B and C)

If a problem occurs with the XM® tuner, a message will appear on the dis- play. Refer to the table below to identify the problem, and take the suggested corrective action.

ANTENNA

UPDATING

NO SIGNAL

LOADING

OFF AIR

-----

The XM® antenna is not connected. Check whether the XM® antenna cable is attached securely. There is a short-circuit in the antenna or the sur- rounding antenna cable. See a Toyota certified dealer. You have not subscribed to the XM® Satellite Radio. The radio is being updated with the latest encryption code. Contact the XM® Satellite Radio for subscription information. When a contract is canceled, you can choose the “CH000” and all free-to-air channels. The premium channel you selected is not autho- rized. Wait for about 2 seconds until the radio returns to the previous channel or “CH001”. If it does not change automatically, select another channel. If you want to listen to the premium chan- nel, contact the XM® Satellite Radio. The XM® signal is too weak at the current location. Wait until your vehicle reaches a location with a stronger signal. The unit is acquiring audio or program information. Wait until the unit has received the information. The channel you selected is not broadcasting any programming. Select another channel. There is no song/program title or artist name/fea- ture associated with the channel at that time. No action needed.

288

3-2. Using the audio system

---

The channel you selected is no longer available. Wait for about 2 seconds until the radio returns to the previous channel or “CH001”. If it does not change automatically, select another channel.

Contact the XM® Listener Care Center at 1-800-967-2346 (U.S.A.) or 1-877- 438-9677 (Canada).

■Certifications for the radio tuner

This equipment has been tested and found to comply with the limits for a class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. How- ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by trying one or more of the following: ●Reorienting or relocating the receiving antenna. ●Increasing the separation between the equipment and receiver. ●Connecting the equipment into an outlet on a circuit different from that to

which the receiver is connected.

●Consulting the dealer or an experienced radio/TV technician for help.

NOTICE

■To prevent damage, remove the antenna in the following cases.

(mast type antenna) ●The antenna will touch the ceiling of a garage. ●A cover will be put on the vehicle.

289

3-2. Using the audio system Using the CD player

Power

Volume

CD eject

Reverse

Displaying text message

Search playback

CD slot

Fast-forward CD insert (type B and C)

Playback CD selection (with a CD changer)

Repeat play

Random playback

Track selection

Loading CDs

■ Loading a CD

Type A Insert a CD. Type B and C Press STEP 1
“WAIT” is shown on the display. Insert a CD when the indicator on the slot turns from amber to green. The display changes from “WAIT” to “LOAD”.

STEP 2

290

3-2. Using the audio system

■ Loading multiple CDs (type B and C) STEP 1

STEP 2

STEP 3

until you hear a beep.

Press and hold “WAIT” is shown on the display. Insert a CD when the indicator on the slot turns from amber to green. The display changes from “WAIT” to “LOAD”. The indicator on the slot turns to amber when the CD is inserted. Insert the next CD when the indicator on the slot turns from amber to green again. Repeat the procedure for the remaining CDs. To stop the operation, press

Ejecting CDs

■ Ejecting a CD

Type A Press Type B and C STEP 1

and remove the CD.

To select the CD to be ejected, press (∧). The number of the CD selected is shown on the display. Press

and remove the CD.

(∨) or

STEP 2

■ Ejecting all the CDs (type B and C)

until you hear a beep, and then remove the

Press and hold CDs.

Selecting a track

Press “∧” to move up or “∨” to move down using

until the

desired track number is displayed.

291

3-2. Using the audio system

Fast-forwarding and reversing tracks

To fast-forward or reverse, press and hold “∧” or “∨” on

Scanning tracks

STEP 1

STEP 2

Press The first ten seconds of each track will be played. Press

again when the desired track is reached.

Selecting a CD (with a CD changer)

■ To select a CD to play

To select the desired CD, press

(∨) or

(∧).

■ To scan loaded CDs Press and hold STEP 1
The first ten seconds of the first track on each CD will be played. Press

again when the desired CD is reached.

until you hear a beep.

STEP 2

Repeat play

■ To repeat a track

Press

(RPT).

■ To repeat all of the tracks on a CD (CD player with changer

only) Press and hold

(RPT) until you hear a beep.

292

3-2. Using the audio system

Random playback

■ Current CD

Press Tracks are played in a random order until

(RAND).

■ All CDs (with a CD changer)

is pressed once more.

Press and hold Tracks on all loaded CDs are played in a random order until (RAND) is pressed once more.

until you hear a beep.

Switching the display

Press

Each time no./Elapsed time”→“CD title”→“Track name”.

is pressed, the display changes in the order of “Track

Silencing a sound (type A only)

→P. 286

293

3-2. Using the audio system

■Display

Up to 12 characters can be displayed at a time. If there are 13 characters or more, pressing and holding or more will display the remaining characters. A maximum of 24 characters can be displayed. If 6 seconds or more, the display will return to the first 12 characters. Depending on the contents recorded, the characters may not be displayed properly or may not be displayed at all.

is pressed for 1 second or more again or has not been pressed for

for 1 second

■Canceling random and repeat playback

Press

(RAND),

(RPT) or

again.

■Error messages

“ERROR”:

This indicates a trouble either in the CD or inside the player. The CD may be dirty, damaged or inserted up-side down.

■Discs that can be used

Discs with the marks shown below can be used. Playback may not be possible depending on recording format or disc fea- tures, or due to scratches, dirt or deterioration.

CDs with copy-protect features may not be used.

■CD player protection feature

To protect the internal components, playback is automatically stopped when a problem is detected while the CD player is being used.

■If CDs are left inside the CD player or in the ejected position for

extended periods CDs may be damaged and may not play properly.

■Lens cleaners

Do not use lens cleaners. Doing so may damage the CD player.

294

3-2. Using the audio system

NOTICE

■CDs and adapters that cannot be used

Do not use the following types of CDs, 3 in. (8 cm) CD adapters or Dual Disc. Doing so may damage the CD player and/or the CD insert/eject function.

●CDs that have a diameter that is not 4.7

in. (12 cm)

●Low-quality and deformed CDs

●CDs with a transparent or translucent

recording area

●CDs that have had tape, stickers or CD- R labels attached to them, or that have had the label peeled off

295

3-2. Using the audio system

NOTICE

■CD player precautions

Failure to follow the precautions below may result in serious damage to the CDs or the player itself. ●Do not insert anything other than CDs into the CD slot. ●Do not apply oil to the CD player. ●Store CDs away from direct sunlight. ●Never try to disassemble any part of the CD player.

●Do not insert more than one CD at a

time.

296

3-2. Using the audio system Playing back MP3 and WMA discs

Power

Volume

CD eject

Reverse

Search playback

CD slot

Fast-forward

Displaying text message CD insert (type B and C)

File selection

Playback CD selection (with a CD changer)

Folder selection

File selection

Random playback

Repeat play

Loading and ejecting MP3 and WMA discs

→P. 290

Selecting a CD (with a CD changer)

→P. 292

297

3-2. Using the audio system

Selecting and scanning a folder

■ Selecting folders one at a time

Press “∧” or “∨” on

to select the desired folder.

■ Selecting the desired folder by cueing the first file of each

folder Press and hold folder is reached, press

until you hear a beep. When the desired

once again.

■ Returning to the first folder

Press and hold “∨” on

until you hear a beep.

Selecting and scanning files

■ Selecting one file at a time

Turn the

or press “∧” or “∨” on

to select the desired

file.

■ Selecting the desired file by cueing the files in the folder

Press When the desired file is reached, press

once again.

Fast-forwarding and reversing files

To fast-forward or reverse, press and hold “∧” or “∨” on

298

3-2. Using the audio system

Repeat play

■ To repeat a file

Press

(RPT).

■ To repeat all of the files on a folder

Press and hold

(RPT) until you hear a beep.

Random playback

■ To play files from a particular folder in random order

Press

(RAND).

■ To play all of the files on a disc in random order

Press and hold

(RAND) until you hear a beep.

Switching the display

Press

Each time is pressed, the display changes in the order of “Folder no./File no./Elapsed time”→“Folder name”→“File name”→“Album title” (MP3 only)→“Track title”→“Artist name”.

Silencing a sound (type A only)

→P. 286

299

3-2. Using the audio system

■Display →P. 294

■Canceling random and repeat playback

→P. 294

■Error messages

“ERROR”:

This indicates a trouble either in the CD or inside the player. The CD may be dirty, damaged or inserted up-side down.

“NO MUSIC”: This indicates that the MP3/WMA file is not included in the

CD.

■Discs that can be used

→P. 294

■CD player protection feature

→P. 294

■If CDs are left inside the CD player or in the ejected position for

extended periods →P. 294

■Lens cleaners

→P. 294

300

3-2. Using the audio system

■MP3 and WMA files

MP3 (MPEG Audio LAYER3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size by using MP3 compression. WMA (Windows Media TM Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3
format. There is a limit to the MP3 and WMA file standards that can be used and to the media/formats on which the files are recorded. ●MP3 file compatibility

• Compatible standards

MP3 (MPEG1 LAYER3, MPEG2 LSF LAYER3)

• Compatible sampling frequencies

MPEG1 LAYER3: 32, 44.1, 48 (kHz) MPEG2 LSF LAYER3: 16, 22.05, 24 (kHz) • Compatible bit rates (compatible with VBR)

MPEG1 LAYER3: 64, 80, 96, 112, 128, 160, 192, 224, 256, 320 (kbps) MPEG2 LSF LAYER3: 64, 80, 96, 112, 128, 144, 160 (kbps)

• Compatible channel modes: stereo, joint stereo, dual channel and

monaural

●WMA file compatibility

• Compatible standards

WMA Ver. 7, 8, 9

• Compatible sampling frequencies

32, 44.1, 48 (kHz)

• Compatible bit rates (only compatible with 2-channel playback)

Ver. 7, 8: CBR 48, 64, 80, 96, 128, 160, 192 (kbps) Ver. 9: CBR 48, 64, 80, 96, 128, 160, 192, 256, 320 (kbps)

●Compatible media

Media that can be used for MP3 and WMA playback are CD-Rs and CD- RWs. Playback in some instances may not be possible, depending on the status of the CD-R or CD-RW. Playback may not be possible or the audio may jump if the disc is scratched or marked with fingerprints.

301

3-2. Using the audio system

●Compatible disc formats

The following disc formats can be used. • Disc formats: CD-ROM Mode 1 and Mode 2

CD-ROM XA Mode 2, Form 1 and Form 2
• File formats: ISO9660 Level 1, Level 2, (Romeo, Joliet)

MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.

Items related to standards and limitations are as follows. • Maximum directory hierarchy: 8 levels • Maximum length of folder names/file names: 32 characters • Maximum number of folders: 192 (including the root) • Maximum number of files per disc: 255

●File names

The only files that can be recognized as MP3/WMA and played are those with the extension .mp3 or .wma.

●Multi-sessions

As the audio system is compatible with multi-sessions, it is possible to play discs that contain MP3 and WMA files. However, only the first session can be played.

●ID3 and WMA tags

ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3 ID3 tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.) WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with ID3 tags.

●MP3 and WMA playback

When a disc containing MP3 or WMA files is inserted, all files on the disc are first checked. Once the file check is finished, the first MP3 or WMA file is played. To make the file check finish more quickly, we recommend you do not write in any files other than MP3 or WMA files or create any unnec- essary folders. If the discs contain a mixture of music data and MP3 or WMA format data, only music data can be played.

302

3-2. Using the audio system

●Extensions

If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.

●Playback

• To play MP3 file with steady sound quality, we recommend a fixed bit

rate of at least 128 kbps and a sampling frequency of 44.1 kHz.

• CD-R or CD-RW playback may not be possible in some instances,

depending on the characteristics of the disc.

• There is a wide variety of freeware and other encoding software for MP3 and WMA files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be possible at all.

• When files other than MP3 or WMA files are recorded on a disc, it may take more time to recognize the disc and in some cases, playback may not be possible at all.

• Microsoft, Windows, and Windows Media are the registered trade-

marks of Microsoft Corporation in the U.S. and other countries.

NOTICE

■CDs and adapters that cannot be used

→P. 295

■CD player precautions

→P. 296

303

3-2. Using the audio system Optimal use of the audio system

Displays the current mode Changes the following set- ting ● Sound quality and vol-

ume balance (→P. 305) The sound quality and bal- be ance changed the best sound.

can to produce

setting

● Automatic Sound Level-

izer on/off (→P. 306)

● Rear seat entertainment

system lock on/off (→P. 306)

304

3-2. Using the audio system

Using the audio control function

■ Changing sound quality modes

Pressing

selects the mode to be changed in the following

order. “BAS”→“MID”*1→“TRE”→“FAD”→“BAL”→“ASL”→“RSE”*2
*1: Type C only *2: Vehicles with rear seat entertainment system

■ Adjusting sound quality

Turning

adjusts the level.

Mode displayed

BAS

MID

TRE

FAD

BAL

Sound qual-

ity mode Bass*

Mid-range* (type C only)

Treble* Front/rear volume balance Left/right volume balance

Turn to the

left

Turn to the

right

Low

High

Level

-5 to 5

-5 to 5

-5 to 5

R7 to F7

Shifts to rear

Shifts to

front

L7 to R7

Shifts to left Shifts to right

*: The sound quality level is adjusted individually in each radio mode or

CD mode.

305

3-2. Using the audio system

■ Adjusting the Automatic Sound Levelizer (ASL)

Type A and B

When “ASL” is selected, turning

to the right changes the

amount of “ASL” in the order of “LOW”, “MID” and “HIGH”.

Turning

to the left turns “ASL” off.

ASL automatically adjusts the volume and tone quality according to vehi- cle speed. Type C

When “ASL” is selected, turning

to the right turns “ASL” on,

and turning

to the left turns “ASL” off.

“ASL” automatically adjusts the volume and tone quality according to the noise level as you drive your vehicle.

■ Setting the rear seat entertainment system lock (if equipped) When “RSE” is selected, turn

until “ON”/“OFF” is dis-

played.

The rear seat entertainment sys- tem lock remains on, even when the “ENGINE START STOP” switch or the engine switch is turned off.

306

3-2. Using the audio system Using the AUX adapter

This adapter can be used to connect a portable audio device and lis- ten to it through the vehicle’s speakers. STEP 1

Open the cover and connect the portable audio device.

Vehicles without seat heater

Vehicles with seat heater

STEP 2

Press

307

3-2. Using the audio system

■Operating portable audio devices connected to the audio system

The volume can be adjusted using the vehicle's audio controls. All other adjustments must be made on the portable audio device itself.

■When using a portable audio device connected to the power outlet

Noise may occur during playback. Use the power source of the portable audio device.

308

3-2. Using the audio system Using the steering wheel audio switches∗

Some audio features can be controlled using the switches on the steering wheel.

Volume Radio: Selects radio sta- tions CD: Selects files (MP3 and WMA) and discs Turns the power on, selects audio source

tracks,

Turning on the power

Press

when the audio system is turned off.

The audio system can be turned off by holding a beep.

down until you hear

Changing the audio source

when the audio system is turned on. The audio source

is pressed.

Press changes as follows each time CD player without changer:

FM1→FM2→CD→AUX→AM

CD player with changer:

FM1→FM2→CD changer→AUX→AM→SAT1→SAT2→SAT3

∗: If equipped 309

3-2. Using the audio system

Adjusting the volume

Press “+” on volume.

to increase the volume and “-” to decrease the

Press and hold

to continue increasing or decreasing the volume.

Selecting a radio station

STEP 1

STEP 2

to select radio mode.

Press Press “∧” or “∨” on To scan for receivable stations, press and hold a beep.

to select a preset station.

until you hear

Selecting a track/file

STEP 1

STEP 2

Press Press “∧” or “∨” on

to select CD mode.

to select the desired track/file.

Selecting a folder (CD player without changer only)

STEP 1

STEP 2

Press Press and hold “∧” or “∨” on

to select CD mode.

until you hear a beep.

Selecting a disc in the CD player (CD player with changer only)

STEP 1

STEP 2

Press Press and hold “∧” or “∨” on

to select CD mode.

until you hear a beep.

CAUTION

■To reduce the risk of an accident

Exercise care when operating the audio switches on the steering wheel.

310

3-3. Using the rear audio system Rear seat entertainment system features∗

The rear seat entertainment system is designed for the rear passen- gers to enjoy audio and DVD video separately from the front audio system.

Front audio system Power outlet main switch Display Headphone volume control dials and headphone jacks DVD player Rear seat entertainment system controller Power outlet A/V input adapter

∗: If equipped 311

3-3. Using the rear audio system

Opening and closing the display

Loading a disc

312

Press the lock release button to open the display.

Pull the display down to an easily viewable angle (between 90° and 125°).

To close the display, push the display up until a click is heard.

The illumination of the screen is automatically turned off when the display is closed. However, the rear seat entertainment system is not turned off.

Insert the disc into the slot with the label side up.

The “DISC” indicator light turns on while the disc is loaded. The player will play the track or chapter, and will repeat it after it reaches the end.

3-3. Using the rear audio system

Ejecting a disc

Press

and remove the disc.

Headphone jacks

To use the headphones, con- nect them to the jack. To adjust the volume Right side dial: Turn it toward the front of the vehicle to increase the volume. Turn it toward the rear of the vehicle to decrease the volume. Left side dial: Turn it toward the rear of to increase the volume. Turn it toward the front of the vehicle to decrease the volume.

the vehicle

313

3-3. Using the rear audio system

■The rear seat entertainment system can be used when

Vehicles without smart key system

The engine switch is in the “ACC” or “ON” position.

Vehicles with smart key system

The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.

■Discs that can be used

Discs with the marks shown below can be used. Playback may not be possible depending on recording format or disc fea- tures, or due to scratches, dirt or deterioration.

■When

appears on the screen

It indicates that the selected switch cannot work.

■Rear system lock

→P. 306

■Error messages “DISC CHECK”:

Indicates that the disc is dirty, damaged or was inserted upside down. Clean the disc or insert it correctly.

“REGION ERROR”: Indicates that the DVD region code is not set properly. “DVD ERROR”:

Indicates that there is a problem inside the player. Eject the disc. Set the disc again. If the malfunction still exists, take the vehicle to your Toyota dealer.

314

3-3. Using the rear audio system

■Before using the remote controller (for new vehicle owners)

STEP 1

Remove the cover.

STEP 2

Remove the insulating sheet.

■When the remote controller battery is fully depleted

Remove the depleted batteries and install new 3 AA batteries.

■If the remote controller batteries are discharged

The following symptoms may occur. ●The rear seat entertainment system control will not function properly. ●The operational range is reduced.

■When using 3 AA batteries

Batteries can be purchased at your Toyota dealer, electric appliance shop, or camera stores. Replace only with the same or equivalent type recommended by a Toyota dealer. Dispose of used batteries according to the local laws.

315

3-3. Using the rear audio system

■Headphones

With some headphones generally available in the market, it may be difficult to catch signals properly. Toyota recommends the use of Toyota genuine wireless headphones. Please contact your Toyota dealer for further details.

■Volume

●Adjust the volume when you connect the headphones to the jack. Loud

sounds may have a significant impact on the human body.

●Conversational speech on some DVDs is recorded at a low volume to emphasize the impact of sound effects. If you adjust the volume assum- ing that the conversations represent the maximum volume level that the DVD will play, you may be startled by louder sound effects or when you change to a different audio source. Be sure to adjust the volume with this in mind.

CAUTION

■While driving

Do not use headphones. Doing so may cause an accident, resulting in death or serious injury.

■When the rear seat entertainment system is not used

Keep the display closed. In the event of an accident or sudden braking, the opened display may hit an occupant's body, resulting in injury.

■To prevent accidents and electric shock

Do not disassemble or modify the remote controller.

■When the remote controller is not used

Stow the remote controller. Injuries may result in the event of an accident or sudden braking.

■Removed battery and other parts

Keep away from children. These parts are small and if swallowed by a child they can cause choking.

316

3-3. Using the rear audio system

NOTICE

■For normal operation after replacing the battery

Observe the following precautions to prevent accidents. ●Always work with dry hands.

Moisture may cause the battery to rust.

●Do not touch or move any other components inside the remote control. ●Do not bend either of the battery terminals.

317

3-3. Using the rear audio system Using the DVD player (DVD video)

■ Remote controller

Turning on the DVD mode Turning on or off the opera- tion switches (icon) on the display Selecting a chapter Reversing a disc Turning on the menu screen Turning on the title selection screen Searching the title Changing the screen angle Inputting selected switch (icon) Selecting a switch (icon) Playing/pausing a disc Fast forwarding a disc Stopping a disc Changing the subtitle lan- guage Changing guage

the audio

the

lan-

318

3-3. Using the rear audio system

to

the desired

Turning on the DVD mode Skipping chapter Playing/pausing a disc Turning on or off the opera- tion switches (icon) on the display Selecting a switch (icon) Inputting switch (icon)

selected

the

■ Unit

■ Display (page 1)

Turning off the operation switches (icon) on the dis- play Displaying page 2
Turning on or off the title selection screen for the disc Turning on or off the menu screen for the disc Reversing a disc Stopping a disc Pausing the disc/canceling the pause Fast forwarding a disc

319

3-3. Using the rear audio system

■ Display (page 2)

Displaying the initial setting screen Displaying page 1
Search for a title Returning to the previous screen Changing guage Changing the subtitle lan- guage Changing the angle

the audio

lan-

■ Operating from the front audio system

Selecting a chapter This operation is available only when the DVD player system is selected for the speakers. Selecting either the front audio system or DVD player audio for the speakers

320

3-3. Using the rear audio system

NOTICE

■Cleaning the display

Wipe the display with a dry soft cloth. If the screen is wiped with a rough cloth, the surface of the screen may be scratched.

■To prevent damage to the remote controller

●Keep the remote control away from direct sunlight, temperature heat and

high humidity.

●Do not drop or knock the remote controller against hard objects. ●Do not sit on or place heavy objects on the remote controller.

■DVD player

Never try to disassemble or oil any part of the DVD player. Do not insert any- thing other than a disc into the slot.

Turning on or off the operation switches

Press Press tion switches.

or or

to turn on the operation switches. once again or select

to turn off the opera-

Turning on the title selection screen

or select

Press to turn on the title selection screen. For the operation of the title selection screen, see the separate manual for the DVD disc.

Turning on the menu screen

Press to turn on the menu screen. For the oper- ation of the menu screen, see the separate manual for the DVD disc.

or select

321

3-3. Using the rear audio system

Returning to the previous screen

Select menu screen, see the separate manual for the DVD disc.

to return to the previous screen. For the operation of the

Searching for a title

Changing the subtitle language

or select

Press to display the screen to search for a title.

Select the title number, and press

or

to input it.

Select vious screen.

to return to the pre-

Press display screen.

or select the subtitle

to language

Each time

is pressed or

is selected, another lan- is

the disc

guage stored on selected. Select vious screen.

to return to the pre-

322

Changing the audio language

3-3. Using the rear audio system

Press display screen.

or select

the audio

to language

Each time

is pressed or

is selected, another lan- is

the disc

guage stored on selected. Select vious screen.

to return to the pre-

Changing the angle

or select

to Press display the screen to change the angle.

Each time

is pressed or

is selected,

the angle

changes. Select vious screen.

to return to the pre-

323

3-3. Using the rear audio system

■DVD player and DVD video discs

This DVD player is compatible NTSC color TV formats. DVD video discs conforming to other formats such as PAL or SECAM cannot be used.

■Region codes

Some DVD video discs have a region code indicating where you can use them. If the DVD video disc is not labeled “ALL” or “1”, you cannot use it in this DVD player. If you attempt to play an inappropriate DVD video disc in this player, “REGION CODE ERROR” appears on the screen. Even if the DVD video disc does not have a region code, in some cases you cannot use it.

■Marks shown on DVD video discs

Indicates NTSC format of color TV.

Indicates the number of audio tracks.

Indicates the number of language subtitles.

Indicates the number of angles.

Indicates the screen to be selected. Wide screen: 16:9
Standard: 4:3
Indicates regions in which this video disc can be played. ALL: all countries Number: region code

324

3-3. Using the rear audio system

■DVD video disc glossary

●DVD video discs: Digital Versatile Discs that hold world’s standard video. DVD video discs have adopted “MPEG2”, one of the world standards of digital compression technologies. The picture data is compressed by 1/ 40 on average and stored. Variable rate encoded technology has been adopted in which the volume of data assigned to the picture is changed depending on the picture format. Audio data is stored using PCM and Dolby digital, which enables higher sound. Furthermore, multi-angle and multi-language features will also help you enjoy the more advanced tech- nology of DVD video.

●Viewer restrictions: This feature limits what can be viewed in conformity with the level of restrictions of the country. The level of restrictions varies depending on the DVD video disc. Some DVD video discs cannot be played at all, or violent scenes are skipped or replaced with other scenes. • Level 1: DVD video discs for children can be played. • Level 2 - 7: DVD video discs for children and G-rated movies can be

played.

• Level 8: All types of DVD video discs can be played.

●Multi-angle feature: Allows you to enjoy the same scene at different

angles.

●Multi-language feature: Allows you to select the language of the subtitles

and audio.

●Region codes: Region codes are provided on DVD players and DVD discs. If the DVD video disc does not have the same region code as the DVD player, you cannot play the disc on the DVD player.

●Audio: This DVD player can play liner PCM, Dolby digital, dts and MPEG

audio format DVD. Other decoded type cannot be played.

●Title and chapter: Video and audio programs stored on DVD video discs

are divided into sections by title and chapter.

●Title: The largest unit of the video and audio programs stored on DVD video discs. Usually, one piece of a movie, one album, or one audio pro- gram is assigned as a title.

●Chapter: A unit smaller than a title. A title comprises multiple chapters.

325

3-3. Using the rear audio system

■Audio

Manufactured under license from Dolby Laboratories. “Dolby”, “Pro Logic”, are trademarks of Dolby© Laboratories. Confidential unpublished and works. 1992-1997 Dolby© Laboratories. All rights reserved. “dts” is a trademark of Digital Theater Systems, Inc.

326

3-3. Using the rear audio system Using the DVD player (video CD)

■ Remote controller

Selecting a switch (icon) Selecting a chapter Playing/pausing a disc Reversing a disc Displaying switches (icon) Inputting the switch (icon) Fast forwarding a disc Stopping a disc Changing the initial setting

operation

selected

■ Unit

the desired

to

Skipping chapter Playing/pausing a disc Selecting a switch (icon) Inputting switch (icon)

the

selected

327

Selecting a disc menu num- ber Turning off the menu screen Displaying page 2
Turning on the disc menu Returning to the previous page screen (with the disc menu displayed) Proceeding to the next page screen (with the disc menu displayed) Changing transmission

to a multiplex

Displaying page 1
Reversing a disc Pausing the disc/canceling the pause Fast forwarding a disc

3-3. Using the rear audio system

■ Display (page 1)

■ Display (page 2)

328

3-3. Using the rear audio system

■ Operating from the front audio system

Selecting a chapter This operation is available only when the DVD player system is selected for the speakers. Selecting either the front audio system or DVD player audio for the speakers

Selecting a disc menu number

Select

to display the disc menu number search screen.

Select the disc menu number, and press

or

to input it.

Select

to return to the previous screen.

329

3-3. Using the rear audio system Using the DVD player (audio CD/CD text)

the control screen, to display

Using press the control screen.

or

Repeat play Random playback Search playback

■ Operating from the front audio system

Selecting a track This operation is available only when the DVD player system is selected for the speakers. Selecting either the front audio system or DVD player audio for the speakers

■Canceling random, repeat and scan play

Select

or

again.

330

3-3. Using the rear audio system Using the DVD player (MP3 discs)

■ Using the control screen

Press play the control screen.

or

to dis-

Repeat play Random playback Search playback Displaying file information Selecting a folder

■ Operating from the front audio system

Selecting a file This operation is available only when the DVD player system is selected for the speakers. Selecting either the front audio system or DVD player audio for the speakers

331

3-3. Using the rear audio system

Repeat play

■ Repeat a file

Select

■ Repeat all of files in a folder

Select

, and press and hold

or

Random playback

■ Playing files from a particular folder in random order

Select

■ Playing all of the files on a disc in random order

Select

, and press and hold

or

Search playback

■ Selecting the desired file by cueing the files in the folder

Select The player will scan all the files in the folder. Each file will be played for 10 seconds.

■ Selecting the desired file by cueing the folders on the disc

Select

, and press and hold

or

The player will scan all the folders on the disc. The first file in each folder will be played for 10 seconds.

■Canceling random, repeat and play back

Select