2010 Toyota Camry Owners Manual

Albums select

Songs select

Albums select

Songs select

Songs select

Depending on the model, the name of your iPod® may be displayed at the top of the list.

241

3-2. Using the audio system

■ Selecting a list

STEP 1

Turn

to display the first selection list.

STEP 2

Press

to select the desired item.

that corresponds to “MORE” changes to the second

Pressing selection list. Repeat the same procedure to select the desired song name.

STEP 3

To return to the previous selection list, press

that corresponds

to “

”.

Selecting songs from a song list

STEP 1

Press The current playlist is displayed.

that corresponds to “LIST”.

STEP 2

Turning

to select the desired song.

returns the screen from list display to the previous

Press

screen.

242

3-2. Using the audio system

Selecting songs

Turn

or press “∧” or “∨” on

to select the desired song.

Playing and pausing songs

Press

Fast-forwarding and reversing songs

Press and hold “∧” or “∨” on

Shuffle playback

■ Playing songs from one playlist or album in random order

Press To cancel, press the button twice.

that corresponds to “RDM”.

■ Playing songs from all the playlists or albums in random order

Press To cancel, press the button again.

that corresponds to “RDM” twice.

Repeat play

Press

that corresponds to “RPT”.

To cancel, press the button again. Even when the repeat play option has not been selected, playback will automatically continue from the first song in the current play list once the last song has ended.

243

3-2. Using the audio system

Switching the display

Press

Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time

■About iPod®

iPod® is registered trademarks of Apple computer, Inc.

■iPod® player functions

●When an iPod® player is connected and the audio source is changed to iPod® player mode, the iPod® player will resume play from the same point in which it was last used.

●Depending on the iPod® player that is connected to the system, certain functions may not be available. Disconnecting the device and reconnect- ing it once again may resolve some malfunctions.

■iPod® player problems

To resolve most problems encountered when using your iPod® player, dis- connect your iPod® player from the vehicle iPod® player connection and reset it. For instructions on how to reset your iPod® player, refer to your iPod® player Owner's Manual.

■Cable pass-through

→P. 323

■Error messages “IPOD ERROR”:

“NO SONGS”:

This indicates a problem in the iPod® player, inside the USB box or the connection between them. This indicates that there is no music data in the iPod® player.

“UPDATE YOUR IPOD”: This indicates that the version of the iPod® player

is not compatible.

244

3-2. Using the audio system

■Compatible models

●iPod® 5th generation Version 1.2 or later ●iPod® nano 3rd generation Version 1.0 or later ●iPod® nano 2nd generation Version 1.1.2 or later ●iPod® nano Version 1.2 or later ●iPod® touch Version 1.1 or later ●iPod® classic Version 1.0 or later iPhone®, iPod® mini, iPod® shuffle, iPod® photo and 4th generation and ear- lier models of iPod® are not compatible with this system. Items related to standards and limitations are as follows: ●Maximum number of lists in device: 9999
●Maximum number of songs in device: 65,025
●Maximum number of songs per list: 65,025

CAUTION

■Caution while driving

Do not connect iPod® players or operate the controls.

NOTICE

■To prevent damage to iPod® players

●Do not leave iPod® players in the vehicle. The temperature inside may

become high, resulting in damage to the player.

●Do not push down on or apply unnecessary pressure to the iPod® player while it is connected as this may damage the iPod® player or its terminal. ●Do not insert foreign objects into the port as this may damage the iPod®

player or its terminal.

245

3-2. Using the audio system Operating a USB memory player∗

Connecting a USB memory player enables you to enjoy music from the vehicle speakers. ■ Connecting a USB memory player STEP 1

Open the cover and connect a USB memory player.

STEP 2

Press

■ Control panel

Power

Volume

Selecting a folder and files

Selector knob

Fast-forwarding and reversing

Selector buttons

Searching playback

Playback/ pause

Playback

Displaying text messages

246

∗: If equipped

3-2. Using the audio system

Selecting and scanning a folder

■ Selecting a folder Press “∧” or “∨” on

to select the desired folder.

■ Returning to the first file of the first folder

Press and hold “∨” on

until you hear a beep.

■ Scanning the first file of all the folders

STEP 1

Press and hold

until you hear a beep.

The first ten seconds of the first file in each folder will be played.

STEP 2

When the desired folder is reached, press

again.

Selecting and scanning files

■ Selecting a file

Turn

or press “∧” or “∨” on

to select the desired file.

■ Scanning the files in a folder

Press

The first ten seconds of each file will be played.

To cancel, press

again.

When the desired file is reached, press

again.

247

3-2. Using the audio system

Playing and pausing files

Press

Fast-forwarding and reversing files

Press and hold “∧” or “∨” on

Random playback

■ Playing files from a folder in random order

Press

that corresponds to “RDM”.

To cancel, press the button twice.

■ Playing all the files from a USB memory player in random

order Press To cancel, press the button again.

that corresponds to “RDM” twice.

Repeat play

■ Repeating a file

Press

that corresponds to “RPT”.

To cancel, press the button twice.

■ Repeating all the files in a folder

Press

that corresponds to “RPT” twice.

To cancel, press the button again.

248

3-2. Using the audio system

Switching the display

Press

Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time

■USB memory player functions

Depending on the USB memory player that is connected to the system, cer- tain functions may not be available. Disconnecting the device and recon- necting it once again may resolve some malfunctions.

■Cable pass-through

→P. 323

■Error messages

“USB ERROR”: This indicates a problem either in the USB memory player or

“NO MUSIC”:

inside the USB box or connection between them. This indicates that no MP3/WMA files are included in the USB memory player.

249

3-2. Using the audio system

■USB memory player ●Compatible device

USB memory players that can be used for MP3 and WMA playback. Depending on the type of USB device, playback may not be possible.

●Compatible device formats

The following device formats can be used: • USB communication formats: USB2.0 FS (12 mbps) • File formats: FAT16/32 (Windows) • Correspondence class: Mass storage class

MP3 and WMA files written in any format other than those listed above may not play correctly, and their file names and folder names may not be displayed correctly.

Items related to standards and limitations are as follows: • Maximum directory hierarchy: 8 levels • Maximum number of folder in device: 999 (including the root) • Maximum number of files in device: 65,025
• Maximum number of files per folder: 255

●MP3 and WMA files MP3 (MPEG Audio LAYER 3) is a standard audio compression format. Files can be compressed to approximately 1/10 of their original size using MP3 compression. WMA (Windows MediaTM Audio) is a Microsoft audio compression format. This format compresses audio data to a size smaller than that of the MP3
format. There is a limit to the MP3 and WMA file standards that can be used and to the media/formats on which the files are recorded.

250

3-2. Using the audio system

●MP3 file compatibility

• Compatible standards

MP3 (MPEG1 AUDIO LAYERII, III, MPEG2 AUDIO LAYERII, III, MPEG2.5)

• Compatible sampling frequencies

MPEG1 AUDIO LAYERII, III: 32, 44.1, 48 (kHz) MPEG2 AUDIO LAYERII, III: 16, 22.05, 24 (kHz) MPEG2.5: 8, 11.025, 12 (kHz)

• Compatible bit rates (compatible with VBR) MPEG1 AUDIO LAYERII, III: 32-320 (kbps) MPEG2 AUDIO LAYERII, III: 32-160 (kbps) MPEG2.5: 32-160 (kbps)

• Compatible channel modes: stereo, joint stereo, dual channel and

monaural

●WMA file compatibility

• Compatible standards

WMA Ver. 9

• Compatible sampling frequencies HIGH PROFILE 32, 44.1, 48 (kHz)

• Compatible bit rates

HIGH PROFILE 32-320 (kbps, VBR)

●File names

The only files that can be recognized as MP3/WMA and played are those with the extension .mp3 or .wma.

●ID3 and WMA tags

ID3 tags can be added to MP3 files, making it possible to record the track title, artist name, etc. The system is compatible with ID3 Ver. 1.0, 1.1, and Ver. 2.2, 2.3, 2.4 ID3
tags. (The number of characters is based on ID3 Ver. 1.0 and 1.1.) WMA tags can be added to WMA files, making it possible to record the track title and artist name in the same way as with ID3 tags.

●MP3 and WMA playback

When a device containing MP3 or WMA files is plugged, all files in the USB memory device are first checked. Once the file check is finished, the first MP3 or WMA file is played. To make the file check finish more quickly, we recommend you do not write in any files other than MP3 or WMA files or create any unnecessary folders.

251

3-2. Using the audio system

●Extensions

If the file extensions .mp3 and .wma are used for files other than MP3 and WMA files, they will be mistakenly recognized and played as MP3 and WMA files. This may result in large amounts of interference and damage to the speakers.

●Playback

• To play MP3 file with steady sound quality, we recommend a fixed bit

rate of at least 128 kbps and a sampling frequency of 44.1 kHz.

• There is a wide variety of freeware and other encoding software for MP3 and WMA files on the market, and depending on the status of the encoding and the file format, poor sound quality or noise at the start of playback may result. In some cases, playback may not be possible at all.

• Microsoft, Windows, and Windows Media are the registered trade-

marks of Microsoft Corporation in the U.S.A. and other countries.

CAUTION

■Caution while driving

Do not use a USB memory player, or connect a USB memory player.

NOTICE

■To prevent damage to a USB memory player

●Do not leave a USB memory player in the vehicle. The temperature inside

may become high, resulting in damage to the player.

●Do not push down on or apply unnecessary pressure to the USB memory player while it is connected as this may damage the USB memory player or its terminal.

●Do not insert foreign objects into the port as this may damage the USB

memory player or its terminal.

252

3-2. Using the audio system Optimal use of the audio system

Type A

Adjusting the sound quality and ASL

Type B and C

Adjusting the sound quality

Menu button

Selector buttons

253

3-2. Using the audio system

Using the audio control function

■ Changing sound quality modes

Type A

selects the mode to be changed in the following

Pressing order: “BAS”→“TRE”→“FAD”→“BAL”→“ASL” Type B and C

STEP 1

Press

STEP 2

Press “BASS”, “MID” (type B only), “TREB”, “FADE”, or “BAL”

that corresponds to the desired mode.

■ Adjusting sound quality

Turning

or

adjusts the level.

Type A

Mode displayed

BAS TRE

FAD

BAL

Sound qual-

ity mode Bass* Treble* Front/rear volume balance Left/right volume balance

Level

-5 to 5
-5 to 5

Turn to the

left

Turn to the

right

Low

High

F7 to R7

Shifts to rear

Shifts to

front

L7 to R7

Shifts to left Shifts to right

*: The sound quality level is adjusted individually in each radio

mode or CD mode.

254

3-2. Using the audio system

Type B and C

Mode displayed

BASS

MID

TREB

FADE

BAL

Sound qual-

ity mode Bass*

Mid-range* (type B only)

Treble* Front/rear volume balance Left/right volume balance

Turn to the

left

Turn to the

right

Low

High

Level

-5 to 5

-5 to 5

-5 to 5

F7 to R7

Shifts to rear

Shifts to

front

L7 to R7

Shifts to left Shifts to right

*: The sound quality level is adjusted individually in each audio

mode.

■ Adjusting the Automatic Sound Levelizer (ASL)

Type A

When “ASL” is selected, turning

to the right changes the

“ASL” level in the order of “LOW”, “MID” and “HIGH”.

Turning

to the left turns “ASL” off.

ASL automatically adjusts the volume and tone quality according to vehi- cle speed.

255

3-2. Using the audio system

Type B and C

STEP 1

Press

STEP 2

Press

that corresponds to “MORE”.

STEP 3

Press

that corresponds to “ASL”.

that corresponds to the desired mode.

Press

STEP 4
Type B: “ON” or “OFF” Type C: “LOW”, “MID”, “HIGH”, or “OFF”

ASL automatically adjusts the volume and tone quality according to vehi- cle speed.

■ Setting the number of preset pages (type B and C) The number of preset pages desired can be set from 1 to 6. The initial setting is 6 pages.

STEP 1

Press

STEP 2

STEP 3

STEP 4

Press Press Press pages.

that corresponds to “MORE”. that corresponds to “PRESET”. that corresponds to the desired number of preset

■ Language settings (type B and C)

→P. 213

256

3-2. Using the audio system

■Trademark owned by SRS Labs, Inc. (type A only)

The audio systems utilize SRS FOCUS® and SRS TruBass® audio enhancement technologies, under license from SRS Labs, Inc., in all modes except AM radio mode.

FOCUS, TruBass, SRS and Inc. FOCUS and TruBass technologies are incorporated under license from SRS Labs, Inc.

symbols are trademarks of SRS Labs,

257

3-2. Using the audio system Using the AUX adapter

This adapter can be used to connect a portable audio device and lis- ten to it through the vehicle’s speakers. STEP 1

Open the cover and connect the portable audio device.

Type A

Type B

STEP 2

Press

or

258

3-2. Using the audio system

■Operating portable audio devices connected to the audio system

The volume can be adjusted using the vehicle's audio controls. All other adjustments must be made on the portable audio device itself.

■When using a portable audio device connected to the power outlet

Noise may occur during playback. Use the power source of the portable audio device.

■Cable pass-through

→P. 323

259

3-2. Using the audio system Using the steering wheel audio switches

Some audio features can be controlled using the switches on the steering wheel.

4-spoke steering wheel

vol-

Increases/decreases ume Radio mode: Select radio stations CD mode: Select tracks, files (MP3 and WMA) and discs iPod® player mode: Selects a song

USB memory player mode: file and

Selects a folder

Bluetooth® audio mode:

Selects a track and album

Turn the power on, selects an audio source

3-spoke steering wheel

260

3-2. Using the audio system

Turning the power on

Press

or

when the audio system is turned off.

The audio system can be turned off by holding the switch down until you hear a beep.

Changing the audio source

or

when the audio system is turned on. The

Press audio source changes as follows each time the switch is pressed. If no discs are inserted in the player, that mode will be skipped. Type A:

FM1→FM2→CD→AUX→AM→SAT1→SAT2→SAT3

Type B and C:

FM→SAT→CD→CD changer (type B only)→Bluetooth® Audio→AUX→ USB/iPod®→AM

Adjusting the volume

Press “+” on decrease the volume.

or

to increase the volume and “-” to

Press and hold the switch to continue increasing or decreasing the vol- ume.

Selecting a radio station

STEP 1

STEP 2

Press Press “∨” or “∧” on

or

to select the radio mode.

or

to select a radio station.

To scan for receivable stations, press and hold “∨” or “∧” on

or

until you hear a beep.

261

3-2. Using the audio system

Selecting a track/file or folder

STEP 1

STEP 2

or

Press memory player mode. Press “∨” or “∧” on track/file or folder.

Selecting a folder

to select the CD, iPod® player or USB

or

to select the desired

STEP 1

STEP 2

or

Press Press and hold “∨” or “∧” on beep.

to select the MP3 and WMA mode.

or

until you hear a

Selecting a disc in the CD player (CD player with changer only)

STEP 1

STEP 2

or

Press Press and hold “∨” or “∧” on beep.

to select the CD mode.

or

until you hear a

CAUTION

■To reduce the risk of an accident

Exercise care when operating the audio switches on the steering wheel.

262

3-3. Using the Bluetooth® audio system Bluetooth® audio system∗

The Bluetooth® audio system enables you to enjoy music played on a portable digital audio player (portable player) from the vehicle speakers via wireless communication. This audio system supports Bluetooth®, a wireless data system capable of playing portable audio music without cables. If your por- table player does not support Bluetooth®, the Bluetooth® audio sys- tem will not function. Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”.

Title

Using the Bluetooth® audio system Operating a Bluetooth® enabled portable player Setting up a Bluetooth® enabled portable player Bluetooth® audio system setup

Page P. 266
P. 271
P. 273
P. 278

■Conditions under which the system will not operate

●If using a portable player that does not support Bluetooth® ●If the portable player is switched off ●If the portable player is not connected ●If the portable player’s battery is low ●If the portable player is behind the seat or in the glove box or console box ●If metal is covering or touching the portable player

∗: If equipped 263

3-3. Using the Bluetooth® audio system

■When transferring ownership of the vehicle

Be sure to initialize the system to prevent personal data from being improp- erly accessed. (→P. 303)

■About Bluetooth®

Bluetooth is a registered trademark of Bluetooth SIG. Inc.

■Compatible models

●Bluetooth® specifications:

Ver. 1.2

●Following Profiles:

• A2DP (Advanced Audio Distribution Profile) Ver. 1.0
• AVRCP (Audio/Video Remote Control Profile) Ver. 1.0 or higher (Ver.

1.3 or higher recommended)

Portable players must correspond to the above specifications in order to be connected to the Bluetooth® audio system. However, please note that some functions may be limited depending on the type of portable player.

■Certification for the Bluetooth® audio system

Type B

FCC ID: BABFT0001A IC ID: MADE IN JAPAN

2024B-FT0001A

Type C

216J-C5ZZZ035

FCC ID: ACJ932C5ZZZ035
IC ID: MADE IN JAPAN This device complies with Part 15 of the FCC Rules and RSS-210 Rules. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) This device must accept any interfer- ence received, including interference that may cause undesired operation.

264

3-3. Using the Bluetooth® audio system

CAUTION

■FCC WARNING

Changes or modifications in construction not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radio frequency exposure. This device is approved for Mobile Application only and, to comply with applicable FCC radio frequency exposure regula- tions, must be used with a distance of at least 7.9 in. (20 cm) between the antenna and the body of any person at all time during use.

■Caution while driving

Do not connect portable players or operate the controls.

NOTICE

■To prevent damage to portable players

Do not leave portable players in the vehicle. The temperature inside the vehicle may become high, resulting in damage to the player.

265

3-3. Using the Bluetooth® audio system Using the Bluetooth® audio system

■ Audio unit

Display A message, name, number, etc. is displayed.

Lower-case characters and special characters cannot be displayed.

Displays information that is too long to be displayed at one time on the display (press and hold) Selects items such as menu and number Turn: Selects an item Press: Inputs the selected item Bluetooth® connection con- dition

If “BT” is not displayed, the Bluetooth® audio system cannot be used.

■ Microphone

266

3-3. Using the Bluetooth® audio system

Operating the system using voice commands

By following voice guidance instructions output from the speaker, voice commands enable to the operation of the Bluetooth® audio sys-

tem without the need to check the display or operate

■ Operation procedure when using voice commands

Press the talk switch and follow voice guidance instructions.

■ Auxiliary commands when using voice commands

The following auxiliary commands can be used when operating the system using a voice command: “Cancel”: Exits the Bluetooth® audio system “Repeat”: Repeats the previous voice guidance instruction “Go back”: Returns to the previous procedure “Help”: Reads aloud the function summary if a help comment is registered for the selected function

267

3-3. Using the Bluetooth® audio system

Using the Bluetooth® audio system for the first time

Before using the Bluetooth® audio system, it is necessary to register a Bluetooth® enabled portable player in the system. Follow the proce- dure below to register (pair) a portable player:

STEP 1

Press

until “BT AUDIO” is displayed.

Press

that corresponds to “SETUP”.

STEP 2
The introductory guidance and portable player name registration instructions are heard.

STEP 3

Select “Pair Audio Player” using a voice command or

STEP 4

Register a portable player name by either of the following methods:

a. Select “Record Name” using

, and say the name to

be registered.

b. Press the talk switch and say the name to be registered.

A voice guidance instruction to confirm the input is heard.

STEP 5

Select “Confirm” using a voice command or

A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the portable player is heard. STEP 6

Input the passkey into the portable player. Refer to the manual that comes with the portable player for the oper- ation of the portable player.

Guidance for registration completion is heard.

268

3-3. Using the Bluetooth® audio system

If the portable player has a Bluetooth® phone, the phone can be reg- istered at the same time. (→P. 286)

Menu list of the Bluetooth® audio system

■ Normal operation

First menu

Second menu

“BT•A Setup”

“Setup”

“System Setup”

Third menu

Operation detail

“Pair Audio Player” “Select Audio Player”

“Change Name”

“List Audio Player” “Set Passkey”

“Delete Audio”

“Guidance Vol- ume”

“Device Name”

“Initialize”

Registering a portable player

Selecting a portable player to be used Changing the registered name of a portable player Listing the registered porta- ble players Changing the passkey Deleting a registered porta- ble player Setting voice guidance vol- ume Displaying the Bluetooth® device address and name Initializing the system

“BT•A Setup” can be canceled by pressing the on-hook switch or saying the voice command, “Cancel”.

269

3-3. Using the Bluetooth® audio system

■When using a voice command

For numbers, say a combination of single digits from zero to nine. Say the command correctly and clearly.

■Situations that the system may not recognize your voice

●When driving on rough roads ●When driving at high speeds ●When air is blowing out of the vents onto the microphone ●When the air conditioning fan emits a loud noise

■Operations that cannot be performed while driving

●Operating the system with

●Registering a portable player to the system

■Changing the passkey

→P. 276

270

3-3. Using the Bluetooth® audio system Operating a Bluetooth® enabled portable player

Power

Volume

Fast- forwarding and reversing

Selector knob

Selecting tracks

Playback

Playback/pause

Displaying text messages

Selecting an album

Press “∨” or “∧” on

Selecting tracks

Press “∧” or “∨” on

Playing and pausing tracks

Press

271

3-3. Using the Bluetooth® audio system

Fast-forwarding and reversing tracks

Press and hold “∧” or “∨” on

Switching the display

Press

Each time is pressed, the display changes in the following order: Track title → Track title/Artist name → Track title/Album name → Track title/Elapsed time

Using the steering wheel audio switches

→P. 260

■Bluetooth® audio system functions

Depending on the portable player that is connected to the system, certain functions may not be available.

■Error messages

“BT AUDIO ERROR”: This indicates a problem in the system.

272

3-3. Using the Bluetooth® audio system Setting up a Bluetooth® enabled portable player

Registering a portable player in the Bluetooth® audio system allows the system to function. The following functions can be used for reg- istered portable players: ■ Functions and operation procedures

STEP 1

Press

until “BT AUDIO” is displayed.

STEP 2

STEP 3

Press Select one of the following functions using a voice com-

that corresponds to “SETUP”.

mand or

● Registering a portable player

“Pair Audio Player”

● Selecting a portable player to be used

“Select Audio Player”

● Changing the registered name

“Change Name”

● Listing the registered portable players

“List Audio Players”

● Changing the passkey

“Set Passkey”

● Deleting a registered portable player “Delete Audio Player (Delete Audio)”

273

3-3. Using the Bluetooth® audio system

Registering a portable player

Select “Pair Audio Player” using a voice command or

, and

perform the procedure for registering a portable player. (→P. 268)

Selecting a portable player to be used

STEP 1

Select “Select Audio Player” using a voice command or

STEP 2

Select the portable player to be used by either of the following methods, and select “Confirm” by using a voice command or

a. Press the talk switch and say the name of the desired por-

table player.

b. Press the talk switch and say “List Audio Players”. When the name of the desired portable player is read aloud, press the talk switch.

274

3-3. Using the Bluetooth® audio system

STEP 3

Press the talk switch and say “From Car” or “From Audio”, and

select “Confirm” by using a voice command or

Vehicles with smart key system: If “From Car” is selected, the porta- ble player will be automatically connected whenever the “ENGINE START STOP” switch is in either ACCESSORY or IGNITION ON mode. Vehicles without smart key system: If “From Car” is selected, the portable player will be automatically connected whenever the engine switch is in either the “ACC” or “ON” position.

Changing the registered name of a portable player

STEP 1

Select “Change Name” using a voice command or

STEP 2

Select the name of the portable player to be changed by either of the following methods, and select “Confirm” using a

voice command or

a. Press the talk switch and say the name of desired portable

player.

b. Press the talk switch and say “List Audio Players”. When the name of the desired portable player is read aloud, press the talk switch.

STEP 3

Press the talk switch or select “Record Name” using

and say the new name.

STEP 4

Select “Confirm” using a voice command or

275

3-3. Using the Bluetooth® audio system

Listing the registered portable players

Select “List Audio Players” using a voice command or

. The list

of registered portable players will be read aloud. When listing is complete, the system returns to “BT•A Setup”. Pressing the talk switch while the name of a portable player is being read aloud selects the portable player, and the following functions will become available: ● Selecting a portable player: “Select Audio Player” ● Changing a registered name: “Change Name” ● Deleting a portable player: “Delete Audio Player (Delete Audio)”

Changing the passkey

STEP 1

Select “Set Passkey” using a voice command or

STEP 2

Press the talk switch, say a 4 to 8-digit number, and select

“Confirm” using a voice command or

STEP 3

When the entire number to be registered as a passkey has

been input, press

again.

If the number to be registered has 8 digits, pressing of the knob is not necessary.

276

3-3. Using the Bluetooth® audio system

Deleting a registered portable player

STEP 1

Select “Delete Audio Player (Delete Audio)” using a voice

command or

STEP 2

Select the portable player to be deleted by either of the follow- ing methods and select “Confirm” using a voice command or

a. Press the talk switch and say the name of the desired por-

table player.

b. Press the talk switch and say “List Audio Players”. When the name of the desired portable player is read aloud, press the talk switch.

If the portable player to be deleted is paired as a Bluetooth® phone, the registration of the mobile phone can be deleted at the same time. A voice guidance instruction to delete a mobile phone is heard.

STEP 3

Select “Confirm” by using a voice command or

■The number of portable players that can be registered Up to 2 portable players can be registered in the system.

277

3-3. Using the Bluetooth® audio system Bluetooth® audio system setup

■ System setup items and operation procedures →P. 301

278

3-4. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) features∗

This system supports Bluetooth®, which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone. Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”. ■ Hands-free system quick guide STEP 1

Setting a cellular phone. (→P. 283) Adding an entry to the phonebook (Up to 20 names can be stored). (→P. 305) Dialing by inputting a name. (→P. 293)

STEP 2

STEP 3

∗: If equipped 279

3-4. Using the hands-free phone system (for cellular phone)

Title

Using the hands-free phone system ■ Operating the system by using a voice

■ Using the hands-free phone system for

■ Menu list of the hands-free phone

command

the first time

system

Making a phone call ■ Dialing by inputting a number ■ Dialing by inputting a name ■ Speed dialing ■ When receiving a phone call ■ Transferring a call ■ Using the call history memory Setting a cellular phone ■ Registering a cellular phone ■ Selecting the cellular phone to be used ■ Changing a registered name ■ Listing the registered cellular phone ■ Deleting a cellular phone ■ Changing the passkey ■ Turning the hands-free phone

automatic connection on/off

Security and system setup ■ Setting or changing the PIN ■ Locking or unlocking the phone book ■ Setting voice guidance volume ■ Initialization Using the phone book ■ Adding a new phone number ■ Setting speed dials ■ Changing a registered name ■ Deleting registered data ■ Deleting speed dials ■ Listing the registered data

280

Page

P. 283

P. 292

P. 296

P. 301

P. 305

3-4. Using the hands-free phone system (for cellular phone)

■Conditions affecting operation

The hands-free phone system may not operate normally in the following situ- ations: ●The cellular phone is turned off, or located outside the service area. ●The cellular phone has a low battery. ●The cellular phone is not connected to the system. ●The cellular phone is behind the seat or in the glove box, or metal mate-

rial covers or touches the phone.

■When transferring ownership of the vehicle

Be sure to initialize the system to prevent personal data from being improp- erly accessed.

■Required profiles for the cellular phone

●HFP (Hands Free Profile) Ver. 1.0
●OPP (Object Push Profile) Ver. 1.1

■About Bluetooth®

Bluetooth is a registered trademark of Bluetooth SIG. Inc.

281

3-4. Using the hands-free phone system (for cellular phone)

■Certification for the hands-free phone system

Type B

FCC ID: BABFT0001A IC ID: MADE IN JAPAN

2024B-FT0001A

Type C

216J-C5ZZZ035

FCC ID: ACJ932C5ZZZ035
IC ID: MADE IN JAPAN This device complies with Part 15 of the FCC Rules and RSS-210 Rules. Operation is subject to the following two conditions; (1) This device may not cause harmful interference, and (2) This device must accept any interfer- ence received, including interference that may cause undesired operation.

CAUTION

■FCC WARNING

Changes or modifications in construction not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Radio frequency exposure. This device is approved for Mobile Application only and, to comply with applicable FCC radio frequency exposure regula- tions, must be used with a distance of at least 7.9 in. (20 cm) between the antenna and the body of any person at all time during use.

■Caution while driving

Do not use a cellular phone, or connect the Bluetooth® phone.

NOTICE

■To prevent damage to a cellular phone

Do not leave a cellular phone in the vehicle. The temperature inside may become high resulting in damage to the phone.

282

3-4. Using the hands-free phone system (for cellular phone) Using the hands-free phone system (for cellular phone)

■ Audio unit

Display A message, name, phone number, etc. is displayed.

Lower-case characters and special characters, such as an umlaut, cannot be dis- played.

Displays information that is too long to be displayed at one time on the display (press and hold) Selects speed dials Selects items such as menu or number Turn: Selects an item Press: Inputs the selected item Bluetooth® connection con- dition and reception level

If “BT” is not displayed, the hands-free phone system cannot be used.

283

3-4. Using the hands-free phone system (for cellular phone)

■ Steering wheel

4-spoke steering wheel

Volume The voice guidance volume cannot be adjusted using this button. On-hook switch Turns the hands-free sys- tem off/ends a call/refuses a call Off-hook switch Turns the hands-free sys- tem on/starts a call Talk switch Turns the voice command system on (press)/turns the voice command system off (press and hold)

284

3-4. Using the hands-free phone system (for cellular phone)

3-spoke steering wheel

■ Microphone

Volume The voice guidance volume cannot be adjusted using this button. Off-hook switch Turns the hands-free sys- tem on/starts a call On-hook switch Turns the hands-free sys- tem off/ends a call/refuses a call Talk switch Turns the voice command system on (press)/turns the