2009 Toyota Camry Owners Manual

Adjusting the volume

Press “+” on the volume control switch to increase the volume and “-” to decrease the volume.

Press and hold the switch to continue increasing or decreasing the vol- ume.

Selecting a radio station

STEP 1

STEP 2

Press the “MODE” switch to select the radio mode. Press the “∨ ∧” switch to select a preset station. To scan for receivable stations, press and hold the switch until you hear a beep.

Selecting a track/file

STEP 1

STEP 2

Press the “MODE” switch to select the CD mode. Press the “∨ ∧” switch to select the desired track/file.

Selecting a folder (CD player without changer only)

STEP 1

STEP 2

Press the “MODE” switch to select the CD mode. Press and hold the “∨ ∧” switch until you hear a beep.

230

3-2. Using the audio system

Selecting a disc in the CD player (CD player with changer only)

STEP 1

STEP 2

Press the “MODE” switch to select the CD mode. Press and hold the “∨ ∧” switch until you hear a beep.

CAUTION

â– To reduce the risk of an accident

Exercise care when operating the audio switches on the steering wheel.

231

3-3. Using the hands-free phone system (for cellular phone) Hands-free phone system (for cellular phone) features (CD player with changer only)

This system supports Bluetooth®, which allows you to make or receive calls without using cables to connect a cellular phone and the system, and without operating the cellular phone. Owners of models equipped with a navigation system should refer to the “Navigation System Owner's Manual”.

Title

Using the hands-free phone system Making a phone call Setting a cellular phone Security and system setup Using the phone book

Page P. 235
P. 244
P. 248
P. 253
P. 257

â– Conditions affecting operation

The hands-free phone system may not operate normally in the following situ- ations: ●The cellular phone is turned off, or located outside the service area. ●The cellular phone has a low battery. ●The cellular phone is not connected to the system. ●The cellular phone is behind the seat or in the glove box, or metal mate-

rial covers or touches the phone.

â– When transferring ownership of the vehicle

Be sure to initialize the system to prevent personal data from being improp- erly accessed.

â– Required profiles for the cellular phone

●HFP (Hands Free Profile) Ver. 1.0
●OPP (Object Push Profile) Ver. 1.1

232

3-3. Using the hands-free phone system (for cellular phone)

â– Trademark owned by Bluetooth SIG. Inc.

â– Certification for the hands-free phone system

FCC ID: HYQBTAU01A IC ID: 1551A-BTAU01A MADE IN JAPAN

NOTE: This device complies with Part 15 of the FCC Rules and RSS-210 of industry Canada. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired oper- ation. NOTICE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. How- ever, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ●Reorient or relocate the receiving antenna. ●Increase the separation between the equipment and receiver. ●Connect the equipment into an outlet on a circuit different from that to

which the receiver is connected.

●Consult the dealer or an experienced radio/TV technician for help.

233

3-3. Using the hands-free phone system (for cellular phone)

FCC WARNING: Changes or modifications in construction not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive expo- sure evaluation (MPE). But it is desirable that it should be installed and oper- ated with at least 20 cm and more between the radiator and person’s body (excluding extremities: hands, wrists, feet and legs). Co-location: This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.

CAUTION

â– Caution while driving

Do not use a cellular phone, or connect the Bluetooth® phone.

NOTICE

â– To prevent damage to a cellular phone

Do not leave a cellular phone in the vehicle. The temperature inside may become high resulting in damage to the phone.

234

3-3. Using the hands-free phone system (for cellular phone) Using the hands-free phone system (for cellular phone)

â–  Audio unit

Displays such items as message, name, and phone number

Lower-case characters and special characters, such as an umlaut, cannot be dis- played.

Press and hold: Displays information that is too long to be displayed at one time on the screen Selects speed dials Selects items such as menu or number Turn: Selects an item Press: Inputs the selected item Displays Bluetooth® con- nection condition

If BT is not displayed, the hands-free phone system cannot be used.

Displays the reception level

235

3-3. Using the hands-free phone system (for cellular phone)

â–  Steering wheel

Type A

Volume

The voice guidance volume cannot be adjusted by using this button.

Hands-free phone system off/ends a call/refuses a call (on-hook switch) Hands-free phone system on/starts a call (off-hook switch) Press: Voice command sys- tem on Press and hold: Voice com- mand system off (talk switch)

236

3-3. Using the hands-free phone system (for cellular phone)

Type B

â–  Microphone

Volume

The voice guidance volume cannot be adjusted by using this button.

Hands-free phone system on/starts a call (off-hook switch) Hands-free phone system off/ends a call/refuses a call (on-hook switch) Press: Voice command sys- tem on Press and hold: Voice com- mand system off (talk switch)

237

3-3. Using the hands-free phone system (for cellular phone)

Operating the system by using a voice command

By following voice guidance instructions output from the speaker, voice commands can be given to allow for operation of the hands-

free phone system without checking the display or operating

â–  Operation procedure when using a voice command

Press the talk switch and say the command for a desired function. (→P. 240)

â–  Auxiliary commands when using a voice command

The following auxiliary commands can be used when operating the system using a voice command: Cancel: Exits the hands-free phone system Repeat: Repeats the previous voice guidance instruction Go back: Returns to the previous procedure Help: Reads aloud the function summary if a help comment is registered for the selected function

238

3-3. Using the hands-free phone system (for cellular phone)

Using the hands-free phone system for the first time

Before using the hands-free phone system, it is necessary to register a cellular phone in the system. The phone registration mode will be entered automatically when starting the system with no cellular phone registered. Follow the procedure below to register a cellular phone: STEP 1
The introductory guidance and phone name registration instructions are heard. STEP 2

Register a phone name by either of the following methods.

Press the off-hook switch or the talk switch.

a. Select “Record Name” by using

, and say a name to

be registered.

b. Press the talk switch and say a name to be registered.

A voice guidance instruction to confirm the input is heard.

STEP 3

Select “Confirm” by using a voice command or

A passkey is displayed and heard, and a voice guidance instruction for inputting the passkey into the cellular phone is heard. STEP 4

Input the passkey into the cellular phone. Refer to the manual that comes with the cellular phone for the oper- ation of the phone.

Guidance for registration completion is heard.

239

3-3. Using the hands-free phone system (for cellular phone)

Menu list of the hands-free phone system

â–  Normal operation

First menu

Second menu

Third menu

Operation detail

Dialing a number stored in the incoming call history memory Dialing a number stored in the outgoing call history memory

Dialing by inputting a number

Dialing by inputting a name registered in the phone book Adding a new number Changing a name in the phone book Deleting the phone book data

Deleting a registered speed dial

Listing the phone book data

Registering a speed dial

Add Entry Change Name Delete Entry Delete Speed Dial (Del Spd Dial) List Names Set Speed Dial (Speed Dial)

Callback

Redial

Dial by number Dial by name

Phonebook

240

3-3. Using the hands-free phone system (for cellular phone)

First menu

Second menu

Third menu

Operation detail

Security

Setup

Phone Setup

System Setup

Set PIN Phonebook Lock Phonebook Unlock

Pair Phone

Change Name

Delete

List phones

Select phone

Set Passkey Guidance Vol- ume (Guidance Vol) Initialize

Setting a PIN code Locking the phone book

Unlocking the phone book

Registering the cellular phone to be used Changing a registered name of a cellular phone Deleting a registered cellular phone Listing the registered cellular phones Selecting a cellular phone to be used Changing the passkey

Setting voice guidance vol- ume

Initialization

241

3-3. Using the hands-free phone system (for cellular phone)

â–  Using a short cut key

First menu

Second menu

Operation detail

Dial “XXX (name)”

Phone book add entry

Phone book change name

Phone book delete entry Phone book set speed dial Phone book delete speed dial

Phonebook

Dialing a number registered in the phone book

Adding a new number

Changing the name of a phone number in the phone book

Deleting phone book data

Registering a speed dial

Deleting a speed dial

Phonebook Unlock Phonebook Lock

Unlocking the phone book Locking the phone book

242

3-3. Using the hands-free phone system (for cellular phone)

â– Automatic adjustment of volume

When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less.

â– When using a voice command

For numbers, say a combination of single digits from zero to nine, # (pound), ∗ (star), and + (plus). Say a command correctly and clearly.

â– The system may not recognize your voice in the following situations:

●When driving on a rough road ●When driving at high speeds ●When air is blowing out of the vents onto the microphone ●When the air conditioning fan emits a loud noise

â– The following cannot be performed while driving:

●Operating the system with

●Registering a cellular phone to the system

â– Changing the passkey

→P. 251

243

3-3. Using the hands-free phone system (for cellular phone) Making a phone call

â–  Making a phone call

● Dialing by inputting a number

“Dial by number”

● Dialing by inputting a name

“Dial by name” ● Speed dialing ● Dialing a number stored in the outgoing history memory

“Redial”

● Dialing a number stored in the incoming history memory

“Call back”

■ Receiving a phone call ● Answering the phone ● Refusing the call ■ Transferring a call ■ Using the call history memory

● Dialing ● Storing data in the phone book ● Deleting

Dialing by inputting a number

STEP 1

STEP 2

STEP 3

Press the talk switch and say “Dial by number”. Press the talk switch and say the phone number. Dial by one of the following methods: a. Press the off-hook switch. b. Press the talk switch and say “Dial”.

c. Select “Dial” by using

244

3-3. Using the hands-free phone system (for cellular phone)

Dialing by inputting a name

STEP 1

STEP 2

Press the talk switch and say “Dial by name”. Select a registered name to be input by either of the following methods: a. Press the talk switch and say a registered name. b. Press the talk switch and say “List names”. Press the talk

switch while the desired name is being read aloud.

STEP 3

Dial by one of the following methods: a. Press the off-hook switch. b. Press the talk switch and say “Dial”.

c. Select “Dial” by using

Speed dialing

STEP 1

STEP 2

STEP 3

Press the off-hook switch. Press the preset button in which the desired number is regis- tered. Press the off-hook switch.

When receiving a phone call

â–  Answering the phone

Press the off-hook switch.

â–  Refusing the call

Press the on-hook switch.

245

3-3. Using the hands-free phone system (for cellular phone)

Transferring a call

A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the follow- ing methods:

a. Operate the cellular phone.

Refer to the manual that comes with the cellular phone for the oper- ation of the phone.

b. Press the off-hook switch*1. c. Press the talk switch and say “Call Transfer”*2. *1: This operation can be performed only when transferring a call

from the cellular phone to the system during a call.

*2: While the vehicle is in motion, a call cannot be transferred from

the system to the cellular phone.

Using the call history memory

Follow the procedure below to use a number stored in the call history memory: STEP 1

Press the talk switch and say “Redial” (when using a number stored in the outgoing call history memory) or “Call back” (when using a number stored in the incoming call history memory). Select the number by either of the following methods: a. Say “Previous” or “Go back” until the desired number is dis-

played.

b. Select the desired number by using

STEP 2

246

3-3. Using the hands-free phone system (for cellular phone)

The following operations can be performed:

Dialing: Press the off-hook switch or select “Dial” by using a voice

command or

Storing the number in the phone book: Select “Store” by using a

voice command or

Deleting: Select “Delete” by using a voice command or

â– Call history

Up to 5 numbers can be stored in each of the outgoing and incoming call his- tory memories.

â– When talking on the phone

●Do not talk simultaneously with the other party. ●Keep the volume of the received voice down. Otherwise, voice echo will

increase.

247

3-3. Using the hands-free phone system (for cellular phone) Setting a cellular phone

Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for reg- istered cellular phones: â–  Functions and operation procedures To enter the menu for each function, follow the steps below by

using a voice command or

● Registering a cellular phone

1. “Setup” → 2. “Phone Setup” → 3. “Pair Phone”

● Selecting the cellular phone to be used

1. “Setup” → 2. “Phone Setup” → 3. “Select Phone”

● Changing a registered name

1. “Setup” → 2. “Phone Setup” → 3. “Change Name”

● Listing the registered cellular phones

1. “Setup” → 2. “Phone Setup” → 3. “List Phones”

● Deleting a cellular phone

1. “Setup” → 2. “Phone Setup” → 3. “Delete”

● Changing the passkey

1. “Setup” → 2. “Phone Setup” → 3. “Set Passkey”

Registering a cellular phone

Select “Pair Phone” by using a voice command or procedure for registering a cellular phone. (→P. 239)

, and do the

248

3-3. Using the hands-free phone system (for cellular phone)

Selecting the cellular phone to be used

STEP 1

Select “Select Phone” by using a voice command or

Pattern A

STEP 2

Select the cellular phone to be used by either of the following methods, and select “Confirm” by using a voice command or

a. Press the talk switch and say the desired phone name. b. Press the talk switch and say “List phones”. While the name of the desired cellular phone is being read aloud, press the talk switch.

Pattern B

STEP 2

Select the cellular phone to be used by using

Changing a registered name

STEP 1

Select “Change Name” by using a voice command or

STEP 2

Select the name of the cellular phone to be changed by either of the following methods: a. Press the talk switch and say the desired phone name, and

select “Confirm” by using a voice command or

b. Press the talk switch and say “List phones”. While the desired phone name is being read aloud, press the talk switch.

c. Select the desired phone name by using

249

3-3. Using the hands-free phone system (for cellular phone)

STEP 3

Press the talk switch or select “Record Name” by using

, and say a new name.

STEP 4

Select “Confirm” by using a voice command or

Listing the registered cellular phones

causes

Selecting “List Phones” by using a voice command or the list of registered cellular phones to be read aloud. When listing is complete, the system returns to “Phone Setup”. Pressing the talk switch while the name of a cellular phone is being read selects the cellular phone, and the following functions will be available: • Selecting a cellular phone: “Select Phone” • Changing a registered name: “Change Name” • Deleting a cellular phone: “Delete”

250

3-3. Using the hands-free phone system (for cellular phone)

Deleting a cellular phone

STEP 1

Select “Delete” by using a voice command or

Pattern A

STEP 2

Select the cellular phone to be deleted by either of the follow- ing methods and select “Confirm” by using a voice command

or

a. Press the talk switch and say the name of the desired cellu-

lar phone.

b. Press the talk switch and say “List phones”. While the name of the desired cellular phone is being read aloud, press the talk switch.

Pattern B

STEP 2

Select the desired cellular phone to be deleted by using

Changing the passkey

STEP 1

Select “Set Passkey” by using a voice command or

Pattern A

STEP 2

Press the talk switch, say a 4 to 8-digit number, and select

“Confirm” by using a voice command or

251

3-3. Using the hands-free phone system (for cellular phone)

Pattern B

STEP 2

Select a 4 to 8-digit number by using

The number should be input 1 digit at a time. When the entire number to be registered as a passkey has

STEP 3

been input, press

once again.

â– The number of cellular phones that can be registered Up to 6 cellular phones can be registered in the system.

252

3-3. Using the hands-free phone system (for cellular phone) Security and system setup

To enter the menu of each setting, follow the steps below: â–  Security setting items and operation procedure

● Setting or changing the PIN (Personal Identification Number)

1. “Setup” → 2. “Security” → 3. “Set PIN”

● Locking the phone book

1. “Setup” → 2. “Security” → 3. “Phonebook Lock”

● Unlocking the phone book

1. “Setup” → 2. “Security” → 3. “Phonebook Unlock”

â–  System setup items and operation procedure

● Setting voice guidance volume

1. “Setup” → 2. “System Setup” → 3. “Guidance Vol”

● Initialization

1. “Setup” → 2. “System Setup” → 3. “Initialize”

can only be used for system setup operation.

Setting or changing the PIN

â–  Setting a PIN

STEP 1

Select “Set PIN” by using a voice command or

STEP 2

Enter a PIN by using a voice command or

When using

, input the code 1 digit at a time.

253

3-3. Using the hands-free phone system (for cellular phone)

â–  Changing the PIN

STEP 1

Select “Set PIN” by using a voice command or

STEP 2

Enter the registered PIN by using a voice command or

STEP 3

Enter a new PIN by using a voice command or

When using

, input the code 1 digit at a time.

Locking or unlocking the phone book

STEP 1

Select “Phonebook lock (Phbk Lock)” or “Phonebook unlock

(Phbk Unlock)” by using a voice command or

STEP 2

Input the PIN by either of the following methods and select

“Confirm” by using a voice command or

a. Press the talk switch and say the registered PIN.

b. Input a new PIN by using

254

3-3. Using the hands-free phone system (for cellular phone)

Setting voice guidance volume

STEP 1

Select “Guidance Vol” by using

STEP 2

Change the voice guidance volume.

To decrease the volume: Turn

counterclockwise.

To increase the volume: Turn

clockwise.

Initialization

STEP 1

Select “Initialize” and then “Confirm” by using

STEP 2

Select “Confirm” by using

255

3-3. Using the hands-free phone system (for cellular phone)

â– Initialization

●The following data in the system can be initialized:

• Phone book • Outgoing and incoming call history • Speed dials • Registered cellular phone data • Security code

●Once the initialization has been completed, the data cannot be restored

to its original state.

â– When the phone book is locked

The following functions cannot be used: ●Dialing by inputting a name ●Speed dialing ●Dialing a number stored in the call history memory ●Using the phone book

256

3-3. Using the hands-free phone system (for cellular phone) Using the phone book

To enter the menu of each setting, follow the steps below:

● Adding a new phone number

1. “Phonebook” → 2. “Add Entry”

● Setting speed dial

1. “Phonebook” → 2. “Set Speed Dial (Speed Dial)”

● Changing a registered name

1. “Phonebook” → 2. “Change Name”

● Deleting registered data

1. “Phonebook” → 2. “Delete Entry”

● Deleting speed dial

1. “Phonebook” → 2. “Delete Speed Dial (Del Spd Dial)”

● Listing the registered data

1. “Phonebook” → 2. “List Names”

Adding a new phone number

The following methods can be used to add a new phone number: ● Inputting a phone number by using a voice command ● Transferring data from the cellular phone

● Inputting a phone number by using

● Selecting a phone number from outgoing or incoming call history

257

3-3. Using the hands-free phone system (for cellular phone)

â–  Adding procedure

STEP 1

Select “Add Entry” by using a voice command or

STEP 2

Use one of the following methods to input a telephone num- ber:

Inputting a telephone number by using a voice command

STEP2-1 Select “By Voice” by using a voice command or

STEP2-2 Press the talk switch, say the desired number, and

select “Confirm” by using a voice command.

Transferring data from the cellular phone

STEP2-1 Select “By Phone” and then “Confirm” by using a

voice command or

STEP2-2 Transfer the data from the cellular phone.

Refer to the manual that comes with the cellular phone for the details of transferring data.

STEP2-3 Select the data to be registered by either of the fol-

lowing methods: a. Say “Previous” or “Next” until the desired data is displayed, and select “Confirm” by using a voice command.

b. Select the desired data by using

258

3-3. Using the hands-free phone system (for cellular phone)

Inputting a phone number by using

STEP2-1 Select “Manual Input” by using

STEP2-2 Input a phone number by using

, and press

once again.

Input the phone number 1 digit at a time.

Selecting a phone number from outgoing or incoming call history

STEP2-1 Select “Call History” by using a voice command or

STEP2-2 Select “Outgoing” or “Incoming” by using a voice

command or

STEP2-3 Select the data to be registered by either of the fol-

lowing methods: a. Say “Previous” or “Go back” until the desired data is displayed, and select “Confirm” by using a voice command.

b. Select the desired data by using

259

3-3. Using the hands-free phone system (for cellular phone)

STEP 3

Select the name to be registered by either of the following methods, and select “Confirm” by using a voice command or

a. Press the talk switch and say the desired name.

b. Select “Record Name” by using

, and say the

desired name.

STEP 4

Select “Confirm” by using a voice command or

STEP 3

In firm” registers the newly added phone number as a speed dial.

, selecting “Set Speed Dial (Speed Dial)” instead of “Con-

Setting speed dials

STEP 1

Select “Set Speed Dial (Speed Dial)” by using a voice com-

mand or

STEP 2

Select the data to be registered as a speed dial by either of the following methods: a. Press the talk switch, say desired number, and select “Con-

firm” by using a voice command or

b. Press the talk switch, and say “List names”. While the desired name is being read aloud, press the talk switch,

and select “Confirm” by using a voice command or

c. Select the desired data by using

260

3-3. Using the hands-free phone system (for cellular phone)

STEP 3

Select the desired preset button, and register the data into speed dial by either of the following methods: a. Press the desired preset button, and select “Confirm” by

using a voice command or

b. Press and hold the desired preset button.

Changing a registered name

STEP 1

Select “Change Name” by using a voice command or

STEP 2

Select the name to be changed by either of the following methods. a. Press the talk switch, say desired name, and select “Con-

firm” by using a voice command or

b. Press the talk switch, and say “List names”. While the desired name is being read aloud, press the talk switch,

and select “Confirm” by using a voice command or

c. Select the desired name by using

STEP 3

Select “Record Name” with

or the talk switch.

STEP 4

Say a new name, and select “Confirm” by using a voice com-

mand or

261

3-3. Using the hands-free phone system (for cellular phone)

Deleting registered data

STEP 1

Select “Delete Entry” by using a voice command or

Pattern A

STEP 2

Select the data to be deleted by either of the following meth- ods, and select “Confirm” by using a voice command or

a. Press the talk switch, and say the name of the desired

phone number to be deleted.

b. Press the talk switch, say “List phones”. While the name of the desired phone number is being read aloud, press the talk switch.

Pattern B

STEP 2

Select the data to be deleted by using

Deleting speed dials

STEP 1

Select “Delete Speed Dial (Del Spd Dial)” by using a voice

command or

STEP 2

Press the preset button in which the desired speed dial is reg- istered, and select “Confirm” by using a voice command or

262

3-3. Using the hands-free phone system (for cellular phone)

Listing the registered data

Selecting “List names” by using a voice command causes a list of the registered data to be read aloud. When listing is complete, the system returns to “Phonebook”. Pressing the talk switch while the desired data is being read aloud selects the data, and the following function will be available. • Dialing: “Dial” • Changing a registered name: “Change Name” • Deleting an entry: “Delete Entry” • Setting a speed dial: “Set Speed Dial (Speed Dial)”

â– Limitation of number of digits

A phone number that exceeds 24 digits cannot be registered.

263

3-4. Using the interior lights Interior lights list

Personal lights (→P. 266) Interior light (→P. 265) Engine switch light (vehicles without smart key system) Front door courtesy light

264

3-4. Using the interior lights

Interior light

â– Illuminated entry system

The interior light (with the switch in the “DOOR” position) and engine switch light (vehicles without smart key system) automatically turn on/off according to “ENGINE START STOP” switch mode (vehicles with smart key system) or engine switch position (vehicles without smart key system), the presence of the electronic key (vehicles with smart key system), whether the doors are locked/unlocked and whether the doors are open/closed.

â– To prevent the battery from being discharged

If the interior light and engine switch light (vehicles without smart key sys- tem) remain on when the door is not fully closed and the interior light switch is in the “DOOR” position, the lights will go off automatically after 20 minutes.

â– Customization that can be configured at Toyota dealer

Settings (e.g. The time elapsed before lights turn off) can be changed. (Customizable features →P. 454)

Interior light

Vehicles without moon roof

Door position Off On

265

3-4. Using the interior lights

Vehicles with moon roof

Interior light and personal lights

Door position Off On

Personal lights

Front

On/off

Rear (vehicles with moon roof)

On/off

When either of the rear side doors is opened, the light on that side turns on automatically. Clos- ing the rear side doors will turn the lights off.

266

3-5. Using the storage features List of storage features

Auxiliary boxes Glove box Cup holders Console box

267

3-5. Using the storage features

Glove box

Glove box and console box

Open (pull the lever) Lock with the master key (vehicles without smart key system) or mechanical key (vehicles with smart key sys- tem) Unlock with the master key (vehicles without smart key system) or mechanical key (vehicles with smart key sys- tem)

â– Glove box light

The glove box light turns on when the tail lights are turned on.

CAUTION

â– Caution while driving

Keep the glove box closed. Injuries may result in the event of an accident or sudden braking.

Console box

Lift the lid while pulling the lever.

268

3-5. Using the storage features

Console box

â– When using the console box lid as an armrest (if equipped)

If necessary, the console box lid can slide forward. Pull the lid forward by grasping the front of the lid.

â– Tray in the rear console box

The tray slides forward/backward and can be removed.

CAUTION

â– Caution while driving

Keep the console box closed. Injuries may result in the event of an accident or sudden braking.

269

3-5. Using the storage features

Cup holders

Manual transmission

Lift the lid.

Cup holders

Automatic transmission (type A)

Lift the lid.

Automatic transmission (type B)

To open, press down and release the right side of the cup holder lid.

270

3-5. Using the storage features

Cup holders

Rear (type A)

Pull the armrest down.

Rear (type B)

Pull the armrest down and lift the lid.

â– Using the cup holder (front) to store small items (automatic transmis-

sion)

Remove the holder.

271

3-5. Using the storage features

Cup holders and auxiliary boxes

CAUTION

â– Items unsuitable for the cup holder

Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury. If possible, cover hot drinks to prevent burns.

â– When not in use

Keep the cup holders closed. Injuries may result in the event of an accident or sudden braking.

Auxiliary boxes

Driver's side instrument panel

Pull the handle.

272

3-5. Using the storage features

Auxiliary boxes

Overhead console

Push the lid.

Front console

Push the lid.

Center console (if equipped)

Push the lid.

273

3-5. Using the storage features

â– Cable pass-through

Auxiliary boxes

The auxiliary box of the front console is provided with a hole that allows cables to be passed into the cabin from the power outlet and AUX adapter inside.

Remove the lid. Push out and remove the outer lid.

CAUTION

â– Caution while driving

Keep the auxiliary boxes closed. Injuries may result in the event of an accident or sudden braking.

â– Items that should not be left in the overhead console

Do not leave glasses or lighters in the console. If the interior of the vehicle becomes hot, lighters may explode and glasses may warp or become cracked.

274

3-6. Other interior features Sun visors

Forward position: Flip down. Side position: Flip down, unhook, and swing to the side.

275

3-6. Other interior features Vanity mirrors

Slide the cover.

The light turns on when the cover is opened. (if equipped)

276

3-6. Other interior features Clock

Adjusts the hour. Adjusts the minutes.

â– The clock is displayed when

Vehicles with smart key system

The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.

Vehicles without smart key system

The engine switch is in the “ACC” or “ON” position.

277

3-6. Other interior features Ashtrays (if equipped)

An ashtray can be installed in a cup holder. (→P. 270)

CAUTION

â– When not in use

Keep the ashtray closed. Injuries may result in the event of an accident or sudden braking.

â– To prevent fire

●Fully extinguish matches and cigarettes before putting them in the ashtray,

then make sure the ashtray is fully closed.

●Do not place paper or any other type of flammable object in the ashtray.

278

3-6. Other interior features Power outlet

The power outlet can be used for 12 V accessories that run on less than 10 A. Type A

Type B

Type C

279

3-6. Other interior features

â– The power outlet can be used when

Vehicles with smart key system

The “ENGINE START STOP” switch is in ACCESSORY or IGNITION ON mode.

Vehicles without smart key system

The engine switch is in the “ACC” or “ON” position.

â– Cable pass-through

Connected cables can be passed through the hole in the auxiliary box to the front passenger’s side of the auxiliary box. (→P. 274)

NOTICE

â– To avoid damaging the power outlet

Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short cir- cuit.

â– To prevent the fuse from being blown

Do not use an accessory that uses more than 12 V 10 A.

â– To prevent the battery from being discharged

Do not use the power outlet longer than necessary when the engine is not running.

280

3-6. Other interior features Seat heaters (if equipped)

Heats the left front seat Heats the right front seat The indicator light comes on.

â– The seat heaters can be used when

Vehicles with smart key system

The “ENGINE START STOP” switch is in IGNITION ON mode.

Vehicles without smart key system The engine switch is in “ON” position.

â– When not in use

Turn the seat heater off. The indicator light turns off.

CAUTION

â– Burns