2008 Toyota Camry HV Owners Manual

Download PDF Manual
Remove the fuse with the pull- out tool. STEP 5 Check if the fuse has blown. Type A Normal fuse Blown fuse Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. Normal fuse Blown fuse Replace it with one of an appropriate amperage rating. The amperage rating can be found on the fuse box lid. Type B 326 Type C 4-3. Do-it-yourself maintenance Normal fuse Blown fuse Contact your Toyota dealer. 327 4-3. Do-it-yourself maintenance Fuse layout and amperage ratings n Engine compartment Fuse box cover Fuse block Fuse SPARE SPARE SPARE 328 Circuit Ampere 30 A 15 A 10 A Spare fuse Spare fuse Spare fuse Fuse AM2 ABS MAIN NO.2 ABS MAIN NO.1 ABS MAIN NO.3 BATT FAN ETCS 10 HAZ 11 IG2 12 STR LOCK 13 DOME 14 ECU-B NO.1 15 RADIO NO.1 16 DOOR NO.1 17 IGCT 18 AMP 19 EFI MAIN 4-3. Do-it-yourself maintenance Ampere 7.5 A 10 A 10 A 10 A 10 A 10 A 15 A 20 A 20 A 10 A 10 A 15 A 25 A 30 A 25 A 30 A Circuit “POWER” switch Electronically controlled brake sys- tem Electronically controlled brake sys- tem Electronically controlled brake sys- tem Hybrid battery fan Electronic throttle control system Turn signal lights Multiport fuel injection system/ sequential multiport fuel injection system, starting system, “GAUGE NO.2”, “INJ” and “IGN” fuses Steering lock system Gauges and meters, vanity lights, trunk light, “POWER” switch light, door courtesy lights, interior light, personal lights, clock, smart key system Front passenger occupant classifi- cation system, main body ECU Audio system, navigation system Main body ECU, power door lock Hybrid system ECU, “PWR”, “IGCT No.2” and “INV W/P” fuses Audio system Multiport fuel injection system/ sequential multiport fuel injection system, electronic throttle control system and “EFI NO.3” fuses 329 4-3. Do-it-yourself maintenance Fuse Ampere Circuit 10 A 10 A 15 A 7.5 A 20 A 10 A 10 A 10 A 15 A 15 A 15 A 15 A 50 A 50 A 50 A 50 A 40 A 40 A Fuel tank system, multiport fuel injection system/sequential multi- port fuel injection system Hybrid system ECU, motor genera- tor ECU Hybrid system ECU, hybrid battery (traction battery), DC/DC converter, multiport fuel injection system/ sequential multiport fuel injection system No circuit No circuit Gauges and meters Smart key system Horns Right-hand headlight (low beam) Left-hand headlight (low beam) Right-hand headlight (high beam) Left-hand headlight (high beam) Air conditioning system PTC heater PTC heater Rear window defogger, “MIR HTR” fuse Electric cooling fan Electric cooling fan 20 EFI NO.3 21 IGCT No.2 22 INV W/P 23 S-HORN 24 A/F 25 MPX-B 26 EFI NO.1 27 HORN 28 H-LP(RL) 29 H-LP(LL) 30 H-LP(RH) 31 H-LP(LH) 32 HTR 33 HTR SUB2 34 HTR SUB1 35 RR DEF 36 CDS FAN 37 RDI FAN 330 4-3. Do-it-yourself maintenance Fuse Ampere Circuit 38 DC/DC 120 A 39 EPS 40 ABS MTR2 41 ABS MTR1 80 A 40 A 50 A “ABS MTR2”, “EPS”, “ABS MTR”, “AM2”, “DOOR NO.1”, “ETCS”, “IG2”, “HAZ”, “AMP”, “ABS MAIN1”, “ABS MAIN2”, “STR LOCK”, “ABS MAIN3”, “BTT FAN”, “EFI MAIN”, “EFI NO.1” and “IGCT” fuses Electric power steering system Electronically controlled brake sys- tem Electronically controlled brake sys- tem 331 4-3. Do-it-yourself maintenance n Under the instrument panel Fuse Ampere Circuit RR DOOR RH RR DOOR LH FUEL OPN FR FOG 5 OBD ECU-B NO.2 25 A 25 A 7.5 A 15 A 7.5 A 7.5 A STOP 10 A TI&TE AM1 10 A/C 11 PWR 332 30 A 7.5 A 7.5 A 25 A Rear right power window Rear left power window Fuel filter door opening system No circuit On-board diagnosis system No circuit Stop lights, high mounted stop- light, shift lock control system, mul- tiport fuel injection system/ sequential multiport fuel injection system, main body ECU, electroni- cally controlled brake system, elec- tronic throttle control system No circuit Starting system, multiport fuel injection system/sequential multi- port fuel injection system Air conditioning system Power windows 4-3. Do-it-yourself maintenance Fuse Ampere Circuit 12 DOOR NO.2 13 S/ROOF 14 TAIL 25 A 30 A 15 A 15 PANEL 7.5 A 16 ECU IG NO.1 10 A 17 ECU IG NO.2 7.5 A 18 A/C NO.2 19 WASH 20 S-HTR 21 GAUGE NO.1 22 WIP 23 H-LP LVL 24 INJ 10 A 10 A 20 A 10 A 25 A 7.5 A 15 A Main body ECU Electric moon roof Front side marker lights, tail lights, rear side marker lights, license plate lights Navigation system, seat heaters, emergency flashers, air condition- ing system, audio system, clock, glove box light, instrument panel lights, steering switches Main body ECU, electric moon roof, tire pressure warning system, auto anti-glare inside rear view mir- ror, starting system, navigation sys- tem Electronically controlled brake sys- tem, electric power steering sys- tem, shift lock control system Air conditioning system, rear win- dow defogger Windshield wipers and washer Seat heaters Emergency flashers, back-up lights Windshield wipers and washer No circuit Multiport fuel injection system/ sequential multiport fuel injection system 333 4-3. Do-it-yourself maintenance Fuse Ampere Circuit 25 IGN 10 A 26 GAUGE NO.2 7.5 A 27 ECU-ACC 28 CIG 29 PWR OUTLET 30 RADIO NO.2 31 MIR HTR 32 POWER 33 P/SEAT 7.5 A 20 A 20 A 7.5 A 10 A 30 A 30 A Multiport fuel injection system/ sequential multiport fuel injection system, SRS airbag system, steer- ing lock system, front passenger occupant classification system, smart key system, electronic throt- tle control system Gauges and meters, clock Clock, main body ECU, shift lock control system, outside rear view mirrors, smart key system, starting system No circuit Power outlet Audio system, navigation system Outside rear view mirror defoggers Power windows Power seat n After a fuse is replaced If the lights do not turn on even after the fuse has been replaced, a bulb may need replacing. (→P. 336) If the replaced fuse blows again, have the vehicle inspected by your Toyota dealer. n If there is an overload in the circuits The fuses are designed to blow before the entire wiring harness is damaged. 334 4-3. Do-it-yourself maintenance CAUTION n To prevent system breakdowns and vehicle fire Observe the following precautions. Failing to do so may cause damage, and possibly a fire or injury. l Never use a fuse of a higher amperage rating than indicated, or use any other object in place of a fuse. l Always use a genuine Toyota fuse or equivalent. Never replace a fuse with a wire, even as a temporary fix. This can cause extensive damage or even fire. l Do not modify the fuse or the fuse box. NOTICE n Before replacing fuses Have the cause of electrical overload determined and repaired by your Toyota dealer, as soon as possible. 335 4-3. Do-it-yourself maintenance Light bulbs You may replace the following bulbs yourself. The difficulty level of replacement varies depending on the bulb. If necessary bulb replacement seems difficult to perform, contact your Toyota dealer. For more information about replacing other light bulbs, contact your Toyota dealer. n Prepare a replacement light bulb. Check the wattage of the light bulb being replaced. (→P. 405) n Bulb locations Headlight high beam Rear turn signal light Headlight low beam 336 Replacing light bulbs n Headlight STEP 1 STEP 2 4-3. Do-it-yourself maintenance Turn the bulb base counterclock- wise. Headlight (low beam) Headlight (high beam) Unplug depressing the lock release. the connector while Headlight (low beam) Headlight (high beam) 337 4-3. Do-it-yourself maintenance n Rear turn signal lights STEP 1 Open the trunk lid and remove the cover. STEP 2 Turn the bulb bases counter- clockwise. STEP 3 Remove the light bulb. 338 4-3. Do-it-yourself maintenance n Lights other than the above If any of the lights listed below has burnt out, have it replaced by your Toyota dealer. l Front turn signal/parking lights l High mounted stoplight l Side marker lights l Tail lights l Back-up lights n Condensation build-up on the inside of the lens Contact your Toyota dealer for more information in the following situations. Temporary condensation build-up on the inside of the headlight lens does not indicate a malfunction. l Large drops of water have built up on the inside of the lens. l Water has built up inside the headlight. n LED high mounted stoplight The high mounted stoplight consists of a number of LEDs. If any of the LEDs burn out, take your vehicle to your Toyota dealer to have the light replaced. 339 4-3. Do-it-yourself maintenance CAUTION n Replacing light bulbs l Turn off the headlights. Do not attempt to replace the bulb immediately after turning off the headlights. The bulbs become very hot and may cause burns. l Do not touch the glass portion of the light bulb with bare hands. Hold the bulb by the plastic or metal portion. If the bulb is scratched or dropped it may blow out or crack. l Fully install light bulbs and any parts used to secure them. Failing to do so may result in heat damage, fire, or water entering the headlight unit. This may damage the headlights or cause condensation to build up on the lens. n To prevent damage or fire Make sure bulbs are fully seated and locked. 340 5-1. Essential information If your vehicle needs to be towed If towing is necessary, we recommend having your vehicle towed by your Toyota dealer or a commercial towing service, using a lift-type truck or a flat bed truck. Use a safety chain system for all towing, and abide by all state/pro- vincial and local laws. If towing from the front, the vehicle's rear wheels and axles must be in good condition. (→P. 343) If they are damaged, use a towing dolly or flat bed truck. Before towing The following may indicate a problem with your transmission. Contact your Toyota dealer before towing. l The hybrid system is operating, but the vehicle will not move. l The vehicle makes an abnormal sound. 342 5-1. Essential information Towing with a sling-type truck NOTICE n To prevent body damage Do not tow with a sling-type truck, either from the front or rear. Towing with a wheel-lift type truck from the front Release the parking brake. NOTICE n To prevent damaging the vehicle When raising the vehicle, ensure adequate ground clearance for towing at the opposite end of the raised vehicle. Without adequate clearance, the vehicle could be damaged while being towed. 343 5-1. Essential information Towing with a wheel-lift type truck from the rear Use a towing dolly under the front wheels. NOTICE n To prevent causing serious damage to the transmission Never tow this vehicle from the rear with the front wheels on the ground. Using a flat bed truck If you use chains or cables to tie down your vehicle, the angles shaded in black must be 45°. Do not overly tighten the tie downs or the vehicle may be damaged. 344 5-1. Essential information If you think something is wrong If you notice any of the following symptoms, your vehicle probably needs adjustment or repair. Contact your Toyota dealer as soon as possible. n Visible symptoms l Fluid leaks under the vehicle (Water dripping from the air conditioning after use is normal.) l Flat-looking tires or uneven tire wear l Engine coolant temperature gauge needle continually points higher than normal n Audible symptoms l Changes in exhaust sound l Excessive tire squeal when cornering l Strange noises related to the suspension system l Pinging or other noises related to the hybrid system n Operational symptoms l Engine missing, stumbling or running rough l Appreciable loss of power l Vehicle pulls heavily to one side when braking l Vehicle pulls heavily to one side when driving on a level road l Loss of brake effectiveness, spongy feeling, pedal almost touches the floor 345 5-1. Essential information Event data recorder Your vehicle has computers that monitor and control certain aspects of your vehicle. These computers assist in driving and maintaining optimal vehicle performance. Besides storing data useful for troubleshooting, there is an event data recorder (EDR) that records data in a crash or a near car crash event. In a crash or a near car crash event The SRS airbag sensor assembly contains the EDR. In a crash or a near car crash event, this device may record some or all of the follow- ing information: l Gasoline engine speed l Whether the brake pedal was applied or not l Vehicle speed l To what extent the accelerator pedal was depressed l Position of the transmission shift lever l Whether the driver and front passenger wore seat belts or not l Driver's seat position l Front passenger’s occupant classification l SRS airbag deployment data l SRS airbag system diagnostic data The VSC Electronic Control Unit (ECU) may contain another EDR. In the event that the VSC or Brake Assist system is activated, or the lat- eral acceleration is beyond a certain value, this device may record some or all of the following information: l Behavior of the vehicle l Steering wheel angle 346 5-1. Essential information l Vehicle speed l To what extent the accelerator pedal was depressed l To what extent the brake pedal was applied l To what extent the ECU controlled the condition of the 4 wheels l Vehicle stability control system diagnostic data The information above is intended to be used for the purpose of improving vehicle safety performance. Unlike general data recorders, the EDR does not record sound data such as conversation between passengers. Disclosure of the data Toyota will not disclose the data recorded in an EDR to a third party except when: l An agreement from the vehicle's owner (or the leasing company for a leased vehicle) is obtained l Officially requested by the police or other authorities l Used as a defense for Toyota in a law suit l Ordered by a court law However, if necessary Toyota will: l Use the data for research on Toyota vehicle safety performance l Disclose the data to a third party for research purposes without dis- closing details of the vehicle owner, and only when it is deemed necessary l Disclose summarized data cleared of vehicle identification informa- tion to a non-Toyota organization for research purposes 347 5-2. Steps to take in an emergency If a warning light turns on or a warning buzzer sounds... Calmly perform the following actions if any of the warning lights turn on or flash. If a light turns on or flashes, but then turns off, this does not necessarily indicate a malfunction in the system. Stop the vehicle immediately. Continuing to drive the vehicle may be dangerous. The following warning indicates a possible problem in the brake sys- tem. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning light Warning light/Details Brake system warning light (red indicator) and warning buzzer* • Low brake fluid • Malfunction in the electronically controlled brake system This light also comes on when the parking brake is not released. If the light turns off after the parking brake is fully released the system is operating normally. (U.S.A.) (Canada) *: Parking brake engaged warning buzzer: The buzzer sounds to indicate that the parking brake is still engaged (with the vehicle having reached a speed of 3 mph [5 km/h]). Stop the vehicle immediately. The following warning indicates the possibility of damage to the vehi- cle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning light Warning light/Details Charging system warning light Indicates a malfunction in the vehicle’s charging system. 348 5-2. Steps to take in an emergency Have the vehicle inspected immediately. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning light Warning light/Details Malfunction indicator lamp Indicates a malfunction in: • The electronic engine control system; • The electronic throttle control system; or • The transmission control system. (U.S.A.) (Canada) SRS warning light Indicates a malfunction in: • The SRS airbag system; • The front passenger occupant classification system; or • The seat belt pretensioner system. ABS warning light Indicates a malfunction in: • ABS; or • The brake assist system. (U.S.A.) (Canada) Brake system warning light (yellow indicator) Indicates a malfunction in: • The regenerative braking system; or • The electronically controlled brake system. Electric power steering warning light Indicates a malfunction in the EPS (Electric Power Steering) system. 349 5-2. Steps to take in an emergency n If the malfunction indicator lamp comes on while driving First check the following: Is the fuel tank empty? If it is, fill the fuel tank immediately. Is the fuel tank cap loose? If it is, tighten it securely. The light will go off after taking several driving trips. If the light does not go off even after several trips, contact your Toyota dealer as soon as possible. n Brake system warning light operation The following does not indicate a malfunction: l After the hybrid system is turned on, the red and yellow brake system warning lights may stay on for about 60 seconds. l Depressing the brake pedal repeatedly may turn on the red brake system warning light and buzzer. 350 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning light turns off. Warning light Warning light/Details Correction procedure Check that all doors and the trunk are closed. Refuel the vehicle. Fasten the seat belt. Fasten the seat belt. Open door warning light (warning buzzer)*1 Indicates that a door or the trunk is not fully closed. Low fuel level warning light Indicates that remaining fuel is about 2.5 gal. (9.8 L, 2.1 lmp. gal.) or less Driver’s seat belt reminder light (warning buzzer)*2 Warns the driver to fasten his/her seat belt. Front passenger’s seat belt reminder light (warning buzzer)*2 Warns the front passen- ger to fasten his or her seat belt. Tire pressure warning light (on the center cluster) When the light comes on: Low tire inflation pressure. Adjust the tire inflation pres- sure. (U.S.A.) When the light comes on after blinking for 1 minute: Malfunction in the tire pres- sure warning system. Have the system checked by your Toyota dealer. 351 5-2. Steps to take in an emergency Warning light Warning light/Details Correction procedure Master warning light A buzzer sounds and the warning light comes on and flashes to indicate that the master warning system has detected a malfunc- tion. →P. 357 *1: Open door warning buzzer: The open door warning buzzer sounds to alert the driver that one or more of the doors is not fully closed (with the vehicle having reached a speed of 3 mph [5 km/h]). *2:Driver's and front passenger’s seat belt reminders: The driver’s and front passenger’s seat belts reminder sound to alert the driver and front passenger that his or her seat belt is not fastened. The buzzer sounds intermittently for 10 seconds after the vehicle has reached a speed of at least 12 mph (20 km/h). Then, if the seat belt is still unfastened, the buzzer will sound in a different tone for 20 more seconds. n Front passenger detection sensor and passenger seat belt reminder If luggage is placed on the front passenger seat, the front passenger detection sensor may cause the warning light to flash, even if a passen- ger is not sitting in the seat. If a cushion is placed on the seat, the sensor may not detect a passen- ger, and the warning light may not operate properly. n When the tire pressure warning light comes on Check the tire inflation pressure and adjust to the appropriate level. Pushing the tire pressure warning reset switch does not turn off the tire pressure warning light. n The tire pressure warning light may turn on due to natural causes The tire pressure warning light may turn on due to natural causes such as natural air leaks or tire inflation pressure changes caused by temperature. In this case, adjusting the tire inflation pressure will turn off the warning light (after a few minutes). 352 5-2. Steps to take in an emergency n When a tires is replaced with a spare tire The compact spare tire is not equipped with the tire pressure warning valve and transmitter. If a tire goes flat, the tire pressure warning light will not turn off even though the flat tire is replaced with the spare tire. Replace the spare tire with the repaired tire and adjust the proper tire inflation pressure. The tire pressure warning light will turn off after a few minutes. n If the tire pressure warning system is inoperative The tire pressure warning system may become inoperative in the following conditions: (When the condition becomes normal, the system will work properly.) If tires not equipped with tire pressure warning valves and transmitters are used. If the ID code on the tire pressure warning valves and transmitters is not registered in the tire pressure warning computer. If electronic devices or facilities using similar radio wave frequencies are nearby. If a radio set at similar frequencies is in use in the vehicle. If there is a lot of snow or ice on the vehicle, in particular around the wheels or wheel housings. If non-genuine Toyota wheels are used. (Even if you use Toyota wheels, the tire pressure warning system may not work properly with some types of tires.) If tire chains are used. If the tire inflation pressure is 73 psi (500 kPa, 5.1 kgf/cm2 or bar) or higher n If the tire pressure warning light comes on after blinking frequently for 1 minute If the tire pressure warning light comes on after blinking frequently for 1 minute when the “POWER” switch is turned to ON mode, have it checked by your Toyota dealer. 353 5-2. Steps to take in an emergency n Customization The vehicle speed linked seat belt reminder buzzer can be disabled. (→P. 421) However, Toyota recommends that the seat belt reminder buzzer be opera- tional to alert the driver and front passenger that the seat belts are not fas- tened. CAUTION n If the tire pressure warning light comes on Be sure to observe the following precautions. Failure to do so could cause loss of vehicle control and result in death or serious injury. l Stop your vehicle in a safe place as soon as possible. Adjust the tire infla- tion pressure immediately. If the tire pressure warning light comes on even after tire inflation pressure adjustment, it is probable that you have a flat tire. Check the tires. If the tire is flat, change to the spare tire and have the flat tire repaired by the nearest Toyota dealer. l Avoid abrupt maneuvering and braking. If the vehicle tires deteriorate, you could lose control of the steering wheel or the brakes. n If a blowout or sudden air leakage should occur The tire pressure warning system may not activate immediately. 354 5-2. Steps to take in an emergency CAUTION n Maintenance of the tires Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle man- ufacturer on the vehicle placard or tire inflation pressure label (tire and load information label). (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label [tire and load information label], you should determine the proper tire inflation pressure for those tires.) As an added safety feature, your vehicle has been equipped with a tire pres- sure monitoring system (TPMS-tire pressure warning system) that illumi- nates a low tire pressure telltale (tire pressure warning light) when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale (tire pressure warning light) illuminates, you should stop and check your tires as soon as possible, and inflate them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to over- heat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability. Please note that the TPMS (tire pressure warning system) is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trig- ger illumination of the TPMS low tire pressure telltale (tire pressure warning light). 355 5-2. Steps to take in an emergency CAUTION Your vehicle has also been equipped with a TPMS (tire pressure warning system) malfunction indicator to indicate when the system is not operating properly. The TPMS (tire pressure warning system) malfunction indicator is combined with the low tire pressure telltale (tire pressure warning light). When the system detects a malfunction, the telltale will flash for approxi- mately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists. When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS (tire pressure warning system) malfunction may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS (tire pressure warning system) from functioning properly. Always check the TPMS (tire pressure warning system) malfunction telltale after replacing one or more tires or wheels on your vehi- cle to ensure that the replacement or alternate tires and wheels allow the TPMS (tire pressure warning system) to continue to function properly. NOTICE n Precaution when installing a different tire When a tire of a different specification or maker is installed, the tire pressure warning system may not operate properly. 356 5-2. Steps to take in an emergency If a warning message is displayed If a warning is shown on the multi-information display, stay calm and perform the following actions: Master warning light The master warning light also comes on or flashes in order to indicate that a message is cur- rently being displayed on the multi-information display. Multi-information display If any of the warning lights turns on again after performing the fol- lowing actions, contact your Toyota dealer. 357 5-2. Steps to take in an emergency Stop the vehicle immediately. l The following warning indicates the possibility of damage to the vehicle that may lead to an accident. Immediately stop the vehicle in a safe place and contact your Toyota dealer. Warning message Details Indicates an abnormal engine oil pressure. A buzzer also sounds. The warning light may turn on if the engine oil pressure is too low. Indicates a malfunction in the hybrid system. A buzzer also sounds. l The following warning indicates the possibility of damage to the vehicle that may lead to an accident. Immediately stop the vehicle in a safe place and allow the engine to cool. Warning message Details Indicates that the engine coolant temperature is too high. A buzzer also sounds. 358 5-2. Steps to take in an emergency l The following warning indicates the possibility of damage to the vehicle that may lead to an accident. Immediately stop the vehicle in a safe place and allow the power control unit and electric motor (traction motor) to cool. Warning message Details Indicates that the temperature for the power control unit coolant or electric motor (traction motor) is too high. A buzzer also sounds. Have the vehicle inspected immediately. Failing to investigate the cause of the following warnings may lead to the system operating abnormally and possibly cause an accident. Have the vehicle inspected by your Toyota dealer immediately. Warning message Details Indicates a malfunction in the steering lock sys- tem. A buzzer also sounds. Indicates a malfunction in the TRAC and VSC systems. A buzzer also sounds. 359 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning light turns off. Warning message Details Correction procedure Indicates that one or more of the doors is not fully closed. A buzzer sounds to indicate that one or more of the doors is not fully closed (with the vehicle having reached a speed of 3 mph [5 km/h]). Indicates that the trunk is not fully closed. A buzzer sounds to indicate that the trunk is not fully closed (with the vehicle having reached a speed of 3 mph [5 km/h]). Indicates that the moon roof is not fully closed (with the “POWER” switch is turned OFF and the driver's door open). A buzzer also sounds. Make sure that all of the doors are closed. Close the trunk. Close the moon roof. 360 5-2. Steps to take in an emergency Warning message Details Correction procedure (U.S.A. only) (U.S.A. only) Indicates that the parking brake is still engaged with the vehicle having reached a speed of more than 3 mph (5 km/h). A buzzer also sounds. Indicates that the washer fluid level is low. A buzzer also sounds. Indicates that the engine oil is sched- uled to be changed. A buzzer also sounds. Comes on approxi- mately 4500 miles (7200 km) after the engine oil is changed. (The indicator will not work properly unless the oil maintenance data has been reset). Indicates that the engine oil should be changed. A buzzer also sounds. Comes on approxi- mately 5000 miles (8000 km) after the engine oil is changed (and the oil mainte- nance data has been reset). Release the parking brake. Add washer fluid. Check the engine oil, and change if neces- sary. Check and change the engine oil. 361 5-2. Steps to take in an emergency Warning message Details Correction procedure Indicates that the hybrid battery (trac- tion battery) is low. A buzzer also sounds. Indicates that the transmission is not in P when attempting to start the hybrid sys- tem. A buzzer also sounds. Stop the vehicle and shift the shift lever to P. Shift the shift lever to P before pressing the “POWER” switch. 362 5-2. Steps to take in an emergency n Changing the engine oil (U.S.A. only) Make sure to reset the oil change system. (→P. 295) Messages displayed when refueling The following messages are displayed after the fuel lid opener is pressed. If the messages do not change or are displayed continu- ously, have the vehicle checked by your Toyota dealer. Message Details Preparing the vehicle for refueling. Wait a moment. You may commence refueling. Finish refueling within 30 minutes. Close the fuel lid. 363 5-2. Steps to take in an emergency Other messages If the following message is displayed, take appropriate action and confirm that the message has disappeared. Message Details The driver’s door is opened when the transmis- sion is not in P with the hybrid system on. Shift the shift lever to P. A buzzer also sounds. 364 5-2. Steps to take in an emergency Follow the correction procedures. After taking the specified steps to correct the suspected problem, check that the warning light turns off. Interior buzzer Exterior buzzer Warning message Details Correction procedure Once ⎯ (Comes on for 8 seconds) Once 3 times Confirm the location of the electronic key. Confirm the location of the electronic key. Indicates that the electronic key is not present when the “POWER” switch is pressed. Indicates that a door other than the driver’s door has been opened and closed with the “POWER” switch in any mode other than OFF and the electronic key outside of the detection area. 365 5-2. Steps to take in an emergency Interior buzzer Exterior buzzer Warning message Details Correction procedure Indicates that the driver’s door has been opened or closed with the shift lever in P, the “POWER” switch in any mode other than OFF and the electronic key outside of the detection area. Indicates that the driver’s door has been opened or closed (with the shift lever not in P, the “POWER” switch in any mode other than OFF and the electronic key outside of the detection area). Turn the “POWER” switch OFF or confirm the location of the electronic key. • Shift the shift lever to P. • Confirm the location of the electronic key. Indicates that the key battery is low. Replace the battery. (→P. 322) Once 3 times Once Continuous (Displayed alternately) Once ⎯ 366 5-2. Steps to take in an emergency Interior buzzer Exterior buzzer Warning message Details Correction procedure Once ⎯ Once ⎯ Indicates that a door has been opened or closed and the “POWER” switch has been turned twice to ACCESSORY mode the “POWER” switch OFF. Indicates that the steering lock has not released within 3 seconds of pressing the “POWER” switch. Press the “POWER” switch while depressing the brake pedal. Press the “POWER” switch again while turning the steering wheel with the brake pedal depressed. 367 5-2. Steps to take in an emergency If you have a flat tire Remove the flat tire and replace it with the spare provided. n Before jacking up the vehicle l Stop the vehicle on a hard, flat surface. l Set the parking brake. l Shift the shift lever to P. l Stop the hybrid system. l Turn on the emergency flashers. n Location of the spare tire, jack and tools Transport eyelet (if equipped) Wheel nut wrench Jack Spare tire Jack handle 368 5-2. Steps to take in an emergency Taking out the jack and spare tire STEP 1 Remove the luggage floor cover. STEP 2 Loosen the nut and remove it. Remove the spare tire cover. Loosen the bolt and remove it. Remove the jack tray. STEP 3 Remove the hook. 369 5-2. Steps to take in an emergency Replacing a flat tire STEP 1 Chock the tires. Flat tire Front Rear Left- hand side Right- hand side Left- hand side Right- hand side Wheel chock positions Behind the rear right- hand side tire Behind the rear left- hand side tire In front of the front right-hand side tire In front of the front left-hand side tire STEP 2 Slightly loosen the wheel nuts (one turn). 370 STEP 3 STEP 4 STEP 5 5-2. Steps to take in an emergency Turn the tire jack portion “A” by hand until the notch of the jack is in contact with the jack point. Raise the vehicle until the tire is slightly raised off the ground. Remove all the wheel nuts and the tire. When resting the tire on the ground, place the tire so that the wheel design faces up to avoid scratching the wheel surface. 371 5-2. Steps to take in an emergency Installing the tire STEP 1 Remove any dirt or foreign mat- ter from the wheel contact sur- face. If foreign matter is on the wheel contact surface, the wheel nuts may loosen while the vehicle is in motion, and the tire may come off the vehicle. STEP 2 Install the tire and loosely tighten each wheel nut by hand by approximately the same amount. Replacing an aluminum wheel with a compact spare tire Disc wheel sheet Tighten the nuts until the tapered portion comes into loose contact with the disc wheel sheet. Tapered portion Replacing an aluminum wheel with an aluminum Disc wheel Turn the nut washers until they come into contact with the disc wheel. Washer 372 5-2. Steps to take in an emergency STEP 3 Lower the vehicle. STEP 4 Firmly tighten each nut two or three times in the order shown in the illustration. Tightening torque: 76 ft•lbf (103 N•m, 10.5 kgf•m) STEP 5 Stow the flat tire, tire jack and all tools. n The compact spare tire l The compact spare tire is identified by the label “TEMPORARY USE ONLY” on the tire sidewall. Use the compact spare tire temporarily only in an emergency. l Make sure to check the tire pressure of the compact spare tire. (→P. 404)

Boost Classifieds - Car Advice, Reviews, Events & Classifieds

2008 Toyota Camry HV Owners Manual