2008 Toyota Camry HV Owners Manual

Deleting the phone book data

Deleting a registered speed dial

Listing the phone book data

Registering a speed dial

Callback

Redial

Dial by number Dial by name

Phonebook

Add Entry Change Name Delete Entry Delete Speed Dial (Del Dial) List Names Set Speed Dial (Speed Dial)

220

3-3. Using the hands-free phone system (for cellular phone)

First menu

Second menu

Third menu

Operation detail

Security

Setup

Phone Setup

System Setup

Set PIN Phonebook Lock Phonebook Unlock

Pair Phone

Change Name

Delete

List phones

Select phone

Set Passkey Guidance Vol- ume (Guidance Vol) Initialize

Setting a PIN code Locking the phone book

Unlocking the phone book

Registering a cellular phone to be used Changing the registered name of a cellular phone Deleting a registered cellular phone Listing the registered cellular phones Selecting a cellular phone to be used Changing the passkey

Setting voice guidance vol- ume

Initialization

221

3-3. Using the hands-free phone system (for cellular phone)

n Using a short cut key

First menu

Second menu

Operation detail

Dial “XXX (name)”

Phone book add entry

Phone book change name

Phone book delete entry Phone book set speed dial Phone book delete speed dial

Phonebook

Dialing a number registered in the phone book

Adding a new number

Changing the name of a phone number in the phone book

Deleting phone book data

Registering a speed dial

Deleting a speed dial

Phonebook Unlock Phonebook Lock

Unlocking the phone book Locking the phone book

222

3-3. Using the hands-free phone system (for cellular phone)

n Automatic adjustment of volume

When vehicle speed is 50 mph (80 km/h) or more, the volume automatically increases. The volume returns to the previous volume setting when vehicle speed drops to 43 mph (70 km/h) or less.

n When using a voice command

For numbers, say a combination of single digits from zero to nine, # (pound), ∗ (star), and + (plus). Say a command correctly and clearly.

n The system may not recognize your voice in the following situations:

l When driving on a rough road l When driving at high speeds l When air is blowing out of the vents onto the microphone l When the air conditioning fan emits a loud noise

n The following cannot be performed while driving:

l Operating the system with

l Registering a cellular phone to the system

n Changing the passkey

(→P. 231)

223

3-3. Using the hands-free phone system (for cellular phone) Making a phone call

n Making a phone call

l Dialing by inputting a number

“Dial by number”

l Dialing by inputting a name

“Dial by name” l Speed dialing l Dialing a number stored in the outgoing history memory

“Redial”

l Dialing a number stored in the incoming history memory

“Call back”

n Receiving a phone call l Answering the phone l Refusing the call n Transferring a call n Using the call history memory

l Dialing l Storing data in the phone book l Deleting

Dialing by inputting a number

STEP 1

STEP 2

STEP 3

Press the talk switch and say “Dial by number”. Press the talk switch and say the phone number. Dial by one of the following methods: a. Press the off-hook switch. b. Press the talk switch and say “Dial”.

c. Select “Dial” by using

224

3-3. Using the hands-free phone system (for cellular phone)

Dialing by inputting a name

STEP 1

STEP 2

Press the talk switch and say “Dial by name”. Select a registered name to be input by either of the following methods: a. Press the talk switch and say a registered name. b. Press the talk switch and say “List names”. Press the talk

switch while the desired name is being read aloud.

STEP 3

Dial by one of the following methods: a. Press the off-hook switch. b. Press the talk switch and say “Dial”.

c. Select “Dial” by using

Speed dialing

STEP 1

STEP 2

STEP 3

Press the off-hook switch. Press the preset button in which the desired number is regis- tered. Press the off-hook switch.

When receiving a phone call

n Answering the phone

Press the off-hook switch.

n Refusing the call

Press the on-hook switch.

225

3-3. Using the hands-free phone system (for cellular phone)

Transferring a call

A call can be transferred between the cellular phone and system while dialing, receiving a call, or during a call. Use one of the follow- ing methods:

a. Operate the cellular phone.

Refer to the manual that comes with the cellular phone for the oper- ation of the phone.

b. Press the off-hook switch *1. c. Press the talk switch and say “Call Transfer” *2. *1: This operation can be performed only when transferring a call

from the cellular phone to the system during a call.

*2: While the vehicle is in motion, a call cannot be transferred from

the system to the cellular phone.

Using the call history memory

Follow the procedure below to use a number stored in the call history memory: STEP 1

Press the talk switch and say “Redial” (when using a number stored in the outgoing call history memory) or “Call back” (when using a number stored in the incoming call history memory). Select the number by either of the following methods: a. Say “Previous” or “Go back” until the desired number is dis-

played.

b. Select the desired number by using

STEP 2

226

3-3. Using the hands-free phone system (for cellular phone)

The following operations can be performed:

Dialing: Press the off-hook switch or select “Dial” by using a voice

command or

Storing the number in the phone book: Select “Store” by using a

voice command or

Deleting: Select “Delete” by using a voice command or

n Call history

Up to 5 numbers can be stored in each of the outgoing and incoming call his- tory memories.

n When talking on the phone

l Do not talk simultaneously with the other party. l Keep the volume of the received voice down. Otherwise, voice echo will

increase.

227

3-3. Using the hands-free phone system (for cellular phone) Setting a cellular phone

Registering a cellular phone in the hands-free phone system allows the system to function. The following functions can be used for reg- istered cellular phones: n Functions and operation procedures To enter the menu for each function, follow the steps below by

using a voice command or

l Registering a cellular phone

1. “Setup” → 2. “Phone Setup” → 3. “Pair Phone”

l Selecting the cellular phone to be used

1. “Setup” → 2. “Phone Setup” → 3. “Select Phone”

l Changing a registered name

1. “Setup” → 2. “Phone Setup” → 3. “Change Name”

l Listing the registered cellular phones

1. “Setup” → 2. “Phone Setup” → 3. “List Phones”

l Deleting a cellular phone

1. “Setup” → 2. “Phone Setup” → 3. “Delete”

l Changing the passkey

1. “Setup” → 2. “Phone Setup” → 3. “Set Passkey”

Registering a cellular phone

Select “Pair Phone” by using a voice command or procedure for registering a cellular phone. (→P. 219)

, and do the

228

3-3. Using the hands-free phone system (for cellular phone)

Selecting the cellular phone to be used

STEP 1

Select “Select Phone” by using a voice command or

Pattern A

STEP 2

Select the cellular phone to be used by either of the following methods, and select “Confirm” by using a voice command or

a. Press the talk switch and say the desired phone name. b. Press the talk switch and say “List phones”. While the name of the desired cellular phone is being read aloud, press the talk switch.

Pattern B

STEP 2

Select the cellular phone to be used by using

Changing a registered name

STEP 1

Select “Change Name” by using a voice command or

STEP 2

Select the name of the cellular phone to be changed by either of the following methods: a. Press the talk switch and say the desired phone name, and

select “Confirm” by using a voice command or

b. Press the talk switch and say “List phones”. While the desired phone name is being read aloud, press the talk switch.

c. Select the desired phone name by using

229

3-3. Using the hands-free phone system (for cellular phone)

STEP 3

Press the talk switch or select “Record Name” by using

, and say a new name.

STEP 4

Select “Confirm” by using a voice command or

Listing the registered cellular phones

causes

Selecting “List Phones” by using a voice command or the list of registered cellular phone to be read aloud. When listing is complete, the system returns to “Phone Setup”. Pressing the talk switch while the name of a cellular phone is being read selects the cellular phone, and the following functions will be available: • Selecting a cellular phone: “Select Phone” • Changing a registered name: “Change Name” • Deleting a cellular phone: “Delete”

230

3-3. Using the hands-free phone system (for cellular phone)

Deleting a cellular phone

STEP 1

Select “Delete” by using a voice command or

Pattern A

STEP 2

Select the cellular phone to be deleted by either of the follow- ing methods and select “Confirm” by using a voice command

or

a. Press the talk switch and say the name of the desired cellu-

lar phone.

b. Press the talk switch and say “List phones”. While the name of the desired cellular phone is being read aloud, press the talk switch.

Pattern B

STEP 2

Select the desired cellular phone to be deleted by using

Changing the passkey

STEP 1

Select “Set Passkey” by using a voice command or

Pattern A

STEP 2

Press the talk switch, say a 4 to 8-digit number, and select

“Confirm” by using a voice command or

231

3-3. Using the hands-free phone system (for cellular phone)

Pattern B

STEP 2

Select a 4 to 8-digit number by using

The number should be input 1 digit at a time. When the entire number to be registered as a passkey has

STEP 3

been input, press

once again.

n The number of cellular phones that can be registered Up to 6 cellular phones can be registered in the system.

232

3-3. Using the hands-free phone system (for cellular phone) Security and system setup

To enter the menu of each setting, follow the steps below: n Security setting items and operation procedure

l Setting or changing the PIN (Personal Identification Number)

1. “Setup” → 2. “Security” → 3. “Set PIN”

l Locking the phone book

1. “Setup” → 2. “Security” → 3. “Phonebook Lock”

l Unlocking the phone book

1. “Setup” → 2. “Security” → 3. “Phonebook Unlock”

n System setup items and operation procedure

l Setting voice guidance volume

1. “Setup” → 2. “System Setup” → 3. “Guidance Vol” Initialization 1. “Setup” → 2. “System Setup” → 3. “Initialize”

can only be used for system setup operation.

Setting or changing the PIN

n Setting a PIN

STEP 1

Select “Set PIN” by using a voice command or

STEP 2

Enter a PIN by using a voice command or

When using

, input the code 1 digit at a time.

233

3-3. Using the hands-free phone system (for cellular phone)

n Changing the PIN

STEP 1

Select “Set PIN” by using a voice command or

STEP 2

Enter the registered PIN by using a voice command or

STEP 3

Enter a new PIN by using a voice command or

When using

, input the code 1 digit at a time.

Locking or unlocking the phone book

STEP 1

Select “Phonebook lock (Phbk Lock)” or “Phonebook unlock

(Phbk Unlock)” by using a voice command or

STEP 2

Input the PIN by either of the following methods and select

“Confirm” by using a voice command or

a. Press the talk switch and say the registered PIN.

b. Input a new PIN by using

234

3-3. Using the hands-free phone system (for cellular phone)

Setting voice guidance volume

STEP 1

Select “Guidance Vol” by using

STEP 2

Change the voice guidance volume.

To decrease the volume: Turn

counterclockwise.

To increase the volume: Turn

clockwise.

Initialization

STEP 1

Select “Initialize” and then “Confirm” by using

STEP 2

Select “Confirm” by using

235

3-3. Using the hands-free phone system (for cellular phone)

n Initialization

l The following data in the system can be initialized:

• Phone book • Outgoing and incoming call history • Speed dials • Registered cellular phone data • Security code

l Once the initialization has been completed, the data cannot be restored

to its original state.

n When the phone book is locked

The following functions cannot be used: l Dialing by inputting a name l Speed dialing l Dialing a number stored in the call history memory l Using the phone book

236

3-3. Using the hands-free phone system (for cellular phone) Using the phone book

To enter the menu of each setting, follow the steps below:

l Adding a new phone number

1. “Phonebook” → 2. “Add Entry”

l Setting speed dial

1. “Phonebook” → 2. “Set Speed Dial (Speed Dial)”

l Changing a registered name

1. “Phonebook” → 2. “Change Name”

l Deleting registered data

1. “Phonebook” → 2. “Delete Entry”

l Deleting speed dial

1. “Phonebook” → 2. “Delete Speed Dial (Del Spd Dial)”

l Listing the registered data

1. “Phonebook” → 2. “List Names”

Adding a new phone number

The following methods can be used to add a new phone number: l Transferring data from the cellular phone

Inputting a phone number by using a voice command

Inputting a phone number by using

l Selecting a phone number from outgoing or incoming call history

237

3-3. Using the hands-free phone system (for cellular phone)

n Adding procedure

STEP 1

Select “Add Entry” by using a voice command or

STEP 2

Use one of the following methods to input a telephone num- ber:

Inputting a telephone number by using a voice command

STEP2-1 Select “By Voice” by using a voice command or

STEP2-2 Press the talk switch, say the desired number, and

select “Confirm” by using a voice command.

Transferring data from the cellular phone

STEP2-1 Select “By Phone” and then “Confirm” by using a

voice command or

STEP2-2 Transfer the data from the cellular phone.

Refer to the manual that comes with the cellular phone for the details of transferring data.

STEP2-3 Select the data to be registered by either of the fol-

lowing methods: a. Say “Previous” or “Next” until the desired data is displayed, and select “Confirm” by using a voice command.

b. Select the desired data by using

238

3-3. Using the hands-free phone system (for cellular phone)

Inputting a phone number by using

STEP2-1 Select “Manual Input” by using

STEP2-2 Input a phone number by using

, and press

once again.

Input the phone number 1 digit at a time.

Selecting a phone number from outgoing or incoming call history

STEP2-1 Select “Call History” by using a voice command or

STEP2-2 Select “Outgoing” or “Incoming” by using a voice

command or

STEP2-3 Select the data to be registered by either of the fol-

lowing methods: a. Say “Previous” or “Go back” until the desired data is displayed, and select “Confirm” by using a voice command.

b. Select the desired data by using

239

3-3. Using the hands-free phone system (for cellular phone)

STEP 3

Select the name to be registered by either of the following methods, and select “Confirm” by using a voice command or

a. Press the talk switch and say the desired name.

b. Select “Record Name” by using

, and say the

desired name.

STEP 4

Select “Confirm” by using a voice command or

STEP 3

In firm” registers the newly added phone number as a speed dial.

, selecting “Set Speed Dial (Speed Dial)” instead of “Con-

Setting speed dials

STEP 1

Select “Set Speed Dial (Speed Dial)” by using a voice com-

mand or

STEP 2

Select the data to be registered as a speed dial by either of the following methods: a. Press the talk switch, say desired number, and select “Con-

firm” by using a voice command or

b. Press the talk switch, and say “List names”. While the desired name is being read aloud, press the talk switch,

and select “Confirm” by using a voice command or

c. Select the desired data by using

240

3-3. Using the hands-free phone system (for cellular phone)

STEP 3

Select the desired preset button, and register the data into speed dial by either of the following methods: a. Press the desired preset button, and select “Confirm” by

using a voice command or

b. Press and hold the desired preset button.

Changing a registered name

STEP 1

Select “Change Name” by using a voice command or

STEP 2

Select the name to be changed by either of the following methods. a. Press the talk switch, say desired name, and select “Con-

firm” by using a voice command or

b. Press the talk switch, and say “List names”. While the desired name is being read aloud, press the talk switch,

and select “Confirm” by using a voice command or

c. Select the desired name by using

STEP 3

Select “Record Name” with

or the talk switch.

STEP 4

Say a new name, and select “Confirm” by using a voice com-

mand or

241

3-3. Using the hands-free phone system (for cellular phone)

Deleting registered data

STEP 1

Select “Delete Entry” by using a voice command or

Pattern A

STEP 2

Select the data to be deleted by either of the following meth- ods, and select “Confirm” by using a voice command or

a. Press the talk switch, and say the name of the desired

phone number to be deleted.

b. Press the talk switch, say “List phones”. While the name of the desired phone number is being read aloud, press the talk switch.

Pattern B

STEP 2

Select the data to be deleted by using

Deleting speed dials

STEP 1

Select “Delete Speed Dial (Del Spd Dial)” by using a voice

command or

STEP 2

Press the preset button in which the desired speed dial is reg- istered, and select “Confirm” by using a voice command or

242

3-3. Using the hands-free phone system (for cellular phone)

Listing the registered data

Selecting “List names” by using a voice command causes a list of the registered data to be read aloud. When listing is complete, the system returns to “Phonebook”. Pressing the talk switch while the desired data is being read aloud selects the data, and the following function will be available. • Dialing: “Dial” • Changing a registered name: “Change Name” • Deleting an entry: “Delete Entry” • Setting a speed dial: “Set Speed Dial (Speed Dial)”

n Limitation of number of digits

A phone number that exceeds 24 digits cannot be registered.

243

3-4. Using the interior lights Interior lights list

Personal lights (→P. 246) Interior light (→P. 245) Front door courtesy light

n Illuminated entry system

The interior light (with the switch in the “DOOR” position) automatically turns on/off according to “POWER” switch mode, the presence of the electronic key, whether the doors are locked/unlocked and whether the doors are open/closed.

n To prevent the 12-volt battery from being discharged

If the interior light remains on when the door is not fully closed and the inte- rior light switch is in the “DOOR” position, the light will go off automatically after 20 minutes. n Customization

Settings (e.g. the time elapsed before lights turn off) can be changed. (→P. 421)

244

3-4. Using the interior lights

Interior light

Interior light

Vehicles without moon roof

Door position Off On

Vehicles with moon roof

Door position Off On

245

3-4. Using the interior lights

Personal lights

Front

On/off

Personal lights

Rear (vehicles with moon roof)

On/off

When either of the rear side doors is opened, the light on that side turns on automatically. Clos- ing the rear side doors will turn the lights off.

246

3-5. Using the storage features List of storage features

Auxiliary boxes Glove box Cup holders Console box

247

3-5. Using the storage features

Glove box

Glove box and console box

Open (pull the lever) Lock with the mechanical key Unlock with the mechanical key

n Glove box light

The glove box light turns on when the tail lights are turned on.

CAUTION

n Caution while driving

Keep the glove box closed. Injuries may result in the event of an accident or sudden braking.

Console box

Lift the lid while pulling the lever.

248

3-5. Using the storage features

Console box

n Tray in the console box

The tray slides forward/backward and can be removed.

CAUTION

n Caution while driving

Keep the console box closed. Injuries may result in the event of an accident or sudden braking.

249

3-5. Using the storage features

Cup holders

Front

Cup holders

To open, pull up and release the right side of the cup holder lid.

Rear

Pull the armrest down.

n Using the cup holder (front) to store small items

Remove the holder.

250

3-5. Using the storage features

Cup holders and auxiliary boxes

CAUTION

n Items unsuitable for the cup holder

Do not place anything other than cups or aluminum cans in the cup holders. Other items may be thrown out of the holders in the event of an accident or sudden braking and cause injury. If possible, cover hot drinks to prevent burns.

n When not in use

Keep the cup holders closed. Injuries may result in the event of an accident or sudden braking.

Auxiliary boxes

Driver's side instrument panel

Pull the handle.

Overhead console

Push the lid.

251

3-5. Using the storage features

Auxiliary boxes

Front console

Push the lid.

n Cable pass-through

The auxiliary box of the front console is provided with a hole that allows cables to be passed into the cabin from the inside power outlet and AUX adapter.

Remove the lid. Push out and remove the outer lid.

CAUTION

n Caution while driving

Keep the auxiliary boxes closed. Injuries may result in the event of an accident or sudden braking.

n Items that should not be left in the overhead console

Do not leave glasses or lighters in the console. If the interior of the vehicle becomes hot, lighters may explode and glasses may warp or become cracked.

252

3-6. Other interior features Sun visors

Forward position: Flip down. Side position: Flip down, unhook, and swing to the side.

253

3-6. Other interior features Vanity mirrors

Slide the cover.

The light turns on when the cover is opened. (if equipped)

254

3-6. Other interior features Clock

Adjusts the hour. Adjusts the minutes.

n The clock is displayed when

The “POWER” switch is in ACCESSORY or ON mode.

255

3-6. Other interior features Ashtrays (if equipped)

An ashtray can be installed in a cup holder. (→P. 250)

CAUTION

n When not in use

Keep the ashtray closed. Injuries may result in the event of an accident or sudden braking.

NOTICE

n To prevent fire

l Fully extinguish matches and cigarettes before putting them in the ashtray,

then make sure the ashtray is fully closed.

l Do not place paper or any other type of flammable object in the ashtray.

256

3-6. Other interior features Power outlet

The power outlet can be used for 12 V accessories that run on less than 10 A. Type A

Type B

n The power outlet can be used when

The “POWER” switch is in ACCESSORY or ON mode.

n Cable pass-through

Connected cables can be passed through the hole in the auxiliary box to the front passenger’s side of the auxiliary box. (→P. 252)

257

3-6. Other interior features

NOTICE

n To avoid damaging the power outlet

Close the power outlet lid when the power outlet is not in use. Foreign objects or liquids that enter the power outlet may cause a short cir- cuit.

n To prevent the fuse from being blown

Do not use an accessory that uses more than 12 V 10 A. n To prevent the 12-volt battery from being discharged

Do not use the power outlet longer than necessary when the hybrid system is off.

258

3-6. Other interior features Seat heaters (if equipped)

Heats the left front seat Heats the right front seat The indicator light comes on.

n The seat heaters can be used when The “POWER” switch is in ON mode.

n When not in use

Turn the seat heater off. The indicator light turns off.

CAUTION

n Burns

l Use caution when seating the following persons in a seat with the seat

heater on to avoid the possibility of burns: • Babies, small children, the elderly, the sick and the disabled • Persons with sensitive skin • Persons who are fatigued • Persons who have taken alcohol or drugs that induce sleep (sleeping

drugs, cold remedies, etc.)

l Do not cover the seat with anything when using the seat heater.

Using the seat heater with a blanket or cushion increases the temperature of the seat and may lead to overheating.

259

3-6. Other interior features

NOTICE

n To prevent seat heater damage

Do not put unevenly weighted objects on the seat and do not stick sharp objects (needles, nails, etc.) into the seat.

n To prevent the 12-volt battery from being discharged

Turn the switches off when the hybrid system is off.

260

3-6. Other interior features Armrest

Pull the armrest down for use.

NOTICE

n To prevent damage to the armrest

Do not place too much strain on the armrest.

261

3-6. Other interior features Floor mat

Securely place a mat that matches the size of the space on the car- pet.

Secure the driver's floor mat using the hooks provided.

CAUTION

n When inserting the floor mat

Make sure the floor mat is properly placed on the vehicle carpet. If the floor mat slips and interferes with the movement of the pedals during driving, it may cause an accident.

262

3-6. Other interior features Trunk features

n Grocery bag hooks

n Cargo net

NOTICE

n To prevent damage to the cargo net hooks

Avoid hanging things other than a cargo net on them.

263

3-6. Other interior features Garage door opener

The garage door opener can be programmed to operate garage doors, gates, entry doors, door locks, home lighting systems, and security systems, and other devices.

The garage door opener (HomeLink® Universal Transceiver) is manufac- tured under license from HomeLink®.

Programming HomeLink® (for U.S. owners)

The HomeLink® compatible transceiver in your vehicle has 3 buttons which can be programmed to operate 3 different devices. Refer to the programming method below appropriate for the device.

Buttons Indicator

n Programming HomeLink® STEP 1

Point the remote control for the device 1 to 3 in. (25 to 75 mm) from the HomeLink® control but- tons.

the

indicator

Keep light on HomeLink® in view while pro- gramming.

264

STEP 2

STEP 3

3-6. Other interior features

Press and hold down one of the buttons on HomeLink® and the button on the transmitter. When the indicator light on HomeLink® changes from a slow to a rapid flash after 20 seconds, you can release both buttons.

Test the operation of HomeLink® by pressing the newly pro- grammed button.

the

hold

If programming a garage door opener, check to see if the garage door opens and closes. If the garage door does not operate, see if your garage transmitter is of the Rolling Code type. Press and programmed HomeLink® button. The garage door has the rolling code feature if (on HomeLink®) flashes rapidly for 2
seconds and then remains lit. If your transmitter is of the Rolling Code type, proceed to the head- ing “Programming a rolling code system”.

indicator

light

the

STEP 4

Repeat the steps above to program another device for each of the remaining HomeLink® buttons.

265

3-6. Other interior features

n Programming a Rolling Code system (for U.S. owners)

If your device is Rolling Code equipped, follow the steps under the heading “Programming HomeLink®” before proceeding with the steps listed below.

STEP 1

STEP 2

STEP 3

STEP 4

Locate the training button on the ceiling-mounted garage door opener motor. The exact location and color of the button may vary by brand of garage door opener. Refer to the operation manual supplied with the garage door opener for the location of the training button. Press the training button. Press and release the vehicle’s programmed HomeLink® but- ton twice. The garage door may open. If the garage door opens, the programming process is complete. If the door does not open, press and release the button a third time. This third press and release will complete the programming process by opening the garage door. The ceiling-mounted garage door opener motor should now recog- nize the HomeLink® transceiver and operate the garage door. Repeat the steps above to program another rolling code sys- tem for any of the remaining HomeLink® buttons.

n Programming an entry gate (for U.S. owners)/Programming all

devices in the Canadian market

STEP 1

STEP 2

STEP 3

STEP 4

Place your transmitter 1 to 3 in. (25 to 75 mm) away from the surface of HomeLink®. Keep the indicator light on HomeLink® in view while programming. Press and hold the selected HomeLink® button. Repeatedly press and release (cycle) the device’s remote control button for two seconds each until step 4 is complete. When the indicator light on the HomeLink® compatible trans- ceiver starts to flash rapidly, release the buttons.

266

3-6. Other interior features

STEP 5

STEP 6

Test the operation of HomeLink® by pressing the newly pro- grammed button. Check to see if the gate/device operates correctly. Repeat the steps above to program another device for each of the remaining HomeLink® buttons.

n Programming other devices

To program other devices such as home security systems, home door locks or lighting, contact your authorized Toyota dealer for assistance.

n Reprogramming a button

The individual HomeLink® buttons cannot be erased but can be reprogrammed. To reprogram a button, follow the “Programming” instructions.

Operating HomeLink®

Press the appropriate HomeLink® button. The HomeLink® indicator light on the HomeLink® transceiver should turn on.

HomeLink® continues to send a signal for up to 20 seconds as long as the button is pressed.

Erasing the entire HomeLink® memory (all three programs)

Press and hold down the 2 out- side buttons for 20 seconds until the indicator light flashes.

If you sell your vehicle, be sure to erase the programs stored in the HomeLink® memory.

267

3-6. Other interior features

n Before programming

Install a new battery in the transmitter.

l The battery side of the transmitter must be pointed away from

HomeLink®.

n Certification for the garage door opener

This device complies with Part 15 of the FCC Rules and with RSS-210 of the IC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. WARNING: This transmitter has been tested and complies with FCC and IC rules. Changes or modifications not expressly approved by the party respon- sible for compliance could void the user's authority to operate the device.

CAUTION

n When programming a garage door or other remote control device

The garage door may operate, so ensure people and objects are out of dan- ger to prevent potential harm.

n Conforming to federal safety standards

Do not use the HomeLink® compatible transceiver with any garage door opener or device that lacks safety stop and reverse features as required by federal safety standards. This includes any garage door that cannot detect an obstruction object. A door or device without these features increases the risk of death or serious injury.

268

3-6. Other interior features Compass (if equipped)

The compass on the anti-glare inside rear view mirror indicates the direction in which the vehicle is heading. n Operation

To turn the compass on or off, press and hold “AUTO” for 3
seconds.

n Displays and directions

Display

NE SE SW NW

Direction

North

Northeast

East

Southeast

South

Southwest

West

Northwest

269

3-6. Other interior features

Calibrating the compass

The direction display deviates from the true direction determined by the earth’s magnetic field. The amount of deviation varies according to the geographic position of the vehicle.

If you cross over a map boundary shown in the illustration, the compass will deviate. To obtain higher precision or perfect calibration, refer to the following.

n Deviation calibration STEP 1

STEP 2

Stop the vehicle in a place where it is safe to drive in a circle. Press and hold “AUTO” for 6
seconds.

A number (1 to 15) appears on the compass display.

STEP 3

Press “AUTO” and, referring to the map above, select the number of the zone where you are. If the direction is displayed several seconds after adjustment, the calibration is complete.

270

3-6. Other interior features

n Circling calibration STEP 1

Stop the vehicle in a place where it is safe to drive in a circle. Press and hold “AUTO” for 9
seconds.

C appears on the compass dis- play.

Drive the vehicle at 5 mph (8 km/ h) or less in a circle until a direc- tion is displayed.

STEP 2

STEP 3

If there is not enough space to drive in a circle, drive around the block until the direction is dis- played.

n Conditions unfavorable for correct operation

The compass may not show the correct direction in the following situations: l The vehicle is stopped immediately after turning. l The vehicle is on an inclined surface. l The vehicle is in a place where the earth's magnetic field is subject to interference by artificial magnetic fields (underground car park/parking lot, under a steel tower, between buildings, roof car park/parking lot, near an intersection, near a large vehicle, etc.).

l The vehicle has become magnetized.

(There is a magnet or metal object near the anti-glare inside rear view mirror.)

l The 12-volt battery has been disconnected. l A door is open.

271

3-6. Other interior features

CAUTION

n While driving the vehicle

Do not adjust the display. Be sure to adjust the display only when the vehicle is stopped.