2007 Toyota Camry HV Owners Manual

than

TERMS Packet write— This is a general term that describes the process of writing data on−demand to CD−R, etc., in the same way that data is written to floppy or hard discs. ID3 Tag— This is a method of embedding track−re- lated information in an MP3 file. This em- bedded information can include the track title, the artist’s name, the album title, the music genre, the year of production, com- ments and other data. The contents can be freely edited using software with ID3
tag editing the tags are restricted to the number of characters, the information can be viewed when the track is played back. WMA Tag— WMA files can contain a WMA tag that is used in the same way as an ID3 tag. WMA tags carry information such as track title, artist name.

functions. Although

file names, with a 3 character

ISO 9660 format— This is the international standard for the formatting of CD−ROM folders and files. For the ISO 9660 format, there are two levels of regulations. Level 1: The file name is in 8.3 format (8 charac- ter file extension. File names must be composed of one−byte capital letters and numbers. The “_” symbol may also be included.) Level 2: The file name can have up to 31 charac- ters (including the separation mark “.” and file extension). Each folder must contain fewer than 8 hierarchies. m3u— Playlists created using “WINAMP” software have a playlist file extension (.m3u). MP3— MP3 is an audio compression standard determined by a working group (MPEG) of the ISO (International Standard Organiza- tion). MP3 compresses audio data to about 1/10 the size of that on convention- al discs.

209

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

Hands−free phone system— —Reference Phone Setup (see page 216) D Pair phone

the hands−free system, you To use need to register your phone in the sys- tem.

D Change name

The registered phone names can be changed.

D Delete

The registered phones can be deleted.

D List phones

The registered phone names can be checked.

D Select phone

The registered phones can be selected.

D Set passkey

The passkey can be changed.

Security (see page 221) D Set PIN

The PIN can be set or changed.

D Phone book lock

The phone book can be locked.

D Phone book unlock

locked phone book can be un-

The locked.

System Setup (see page 225) D Adjust Guidance Volume

Guidance volume can be adjusted.

D Initialize Phone Book (see page 225) D Add Entry

Phone numbers and voice tags can be registered.

D Change Name

The registered names can be changed.

D Delete Entry

The registered names can be deleted.

D Delete Speed Dial

The registered speed dial can be de- leted.

D List names

The registered names can be checked.

D Set Speed Dial

Speed dials can be set

Redial (see page 233) Callback (see page 234) Making a phone call (see page 235) Receiving a phone call (see page 238) Talking on the phone (see page 239)

210

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

—Some basics

that allows you

This system supports Bluetoothr, a wireless system to make or receive calls without taking your hands from the steering wheel and without using cables to connect the phone and system. The phone must be paired to the system before using If your cellular phone does not support Blue- toothr, this system will not function.

the hands−free

feature.

CAUTION

While you are driving, do not use a cellular phone the Bluetoothr phone.

connect

or

NOTICE

Do not leave your cellular phone in the car. The temperature indoor may be high and damage the phone.

The system may not function in the follow- ing conditions and places: D The cellular phone is turned off. D The current position

is outside

the

communication area.

D The cellular phone is not connected. D The cellular phone has a low battery. D The cellular phone is hiding behind the seat or in the glove box and console box.

D The cellular phone touches or is cov-

ered with metal materials.

the following ser-

This system supports vice. D HFP (Hands Free Profile) Ver. 1.0
D OPP (Object Push Profile) Ver. 1.1
If your cellular phone does not support the Bluetoothr HFP, you cannot enter phone, and take OPP service individually.

BLUETOOTH is a Bluetooth SIG. Inc.

trademark owned by

211

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

FCC Information

in construction of

Caution: Any changes or modifica- tions this device which are not expressly approved by the party responsible for compliance could void the user’s authority to op- erate the equipment.

FCC Label Information

the

following

This device complies with part 15 of the FCC Rules. Operation is subject to two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, In- cluding interference that may cause undesired operation.

lot of personal data

When transferring ownership of the ve- hicle: is registered when you use the hands−free system. When transferring ownership of the ve- hicle, initialize the system. If you initialize it, the former state will never come back again. Pay much atten- tion when initializing the data. You can initialize the following data in the system. D Phone book data D Dialed numbers and received calls D Speed dial D Bluetoothr phone data D Security code

212

to

interference

in a residential

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference installa- tion. This equipment generates, uses and can radiate radio frequency ener- gy and, if not installed and used in accordance with the instructions, may cause harmful radio communications. However, there is no guarantee that interference will not oc- cur in a particular installation. If this equipment does cause harmful inter- ference to radio or television recep- tion, which can be determined by turn- ing the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: −Reorient or relocate the receiving an- tenna. −Increase the separation between the equipment and receiver. −Connect the equipment into an outlet on a circuit different to which the receiver is connected. −Consult the dealer or an experienced radio/TV technician for help.

from

that

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

—Control and features "Steering switches and microphone

CAUTION: Radio Frequency Radiation Exposure This equipment complies with FCC radiation exposure limits set forth for uncontrolled equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. This equipment has very low levels of RF energy that it deemed to comply without maximum permissive exposure evaluation (MPE). But it is desirable that it should be installed and oper- ated with at least 20 cm and more between radiator and person’s body (excluding extremities: hands, wrists, feet and legs). Co−location: This transmitter must not be co−located or operated in con- junction with any other antenna or transmitter.

the

Steering switches

Overhead console

1. Volume control switch To increase the volume: Push “+”. To decrease the volume: Push “−”. When driving at 80 km/h (50 mph) or more, the volume automatically increases without switch adjustment. When your speed falls below 70 km/h (43 mph), the volume automatically returns to its original level. Voice guidance volume can be changed by pushing the volume control switch on the steering wheel. 2. Talk switch Pushing the talk switch turns the hands− free system on and initiates the speech command system. Pushing and holding the talk switch ends the speech command system. 3. Off−hook switch Pushing hands−free system on. When receiving a call, pushing the off− hook switch allows you to talk on the phone.

the off−hook switch

turns

the

213

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

4. On−hook switch When the hands−free system is on, push- ing the on−hook switch turns the hands− free system off. 5. Microphone The microphone is used when talking on the phone or using the speech command system.

214

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

"Audio unit

the

1. Display Displays such items as the reception lev- el, a party’s name and phone number. See “DISPLAY” described on following page for further details about the display. 2. “AUDIO CTRL” knob Turning the “AUDIO CTRL” knob displays the menu items, names, numbers, etc. to be selected. To select an item, push the “AUDIO CTRL” knob. Due to safety con- cerns, the “AUDIO CTRL” knob does not function while the vehicle is in motion. 3. Preset buttons Pushing registered speed dial numbers. 4. “TEXT” button When the party’s name or phone number is too long to be displayed, pushing and holding the “TEXT” button displays the re- maining characters.

the preset button displays

the

215

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

2. Reception level display Displays the reception level of the radio wave signals. This may not match the display on the cellular phone. The recep- tion level of some cellular phones may not be displayed. The number of bars is greater when the signal received is stronger. 3. Message display Displays phone numbers, names, com- ments, menu items, etc.

in registered

register your phone

—Phone Setup The phone setup menu includes the fol- lowing: D Pair Phone To use the hands−free system, you need the system. to Once you have it, you can make a hands−free call. Up to 6 phones can be registered. D Select Phone When the system connects to Bluetoothr, the phone previously used is automatically selected. Select a different phone if nec- essary. Only the selected phone can be used with the hands−free system. D Change Name The changed. D List Phones The checked. The following can be performed during the name playback: D Select phone D Change name D Delete

registered phone names can be

registered phone names can be

If

there

DISPLAY 1. Bluetoothr display Displays when a Bluetoothr connection is made. the Bluetoothr connection has not been made and communication between the phone and system is not possible. When using the hands−free system, make sure that “BT” is displayed. The display is updated in real time.

is no display,

216

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

D Set PassKey The passkey can be changed. A 4 to 8
digit code can be input as a passkey. D Delete The registered phones can be deleted. To enter the phone setup menu 1. Push the off−hook switch to turn the

hands−free system on.

2. Follow voice guidance instructions, or “AUDIO CTRL” knob until the

is displayed and push

the

turn “Setup” knob.

“Setup. Please push the talk switch and say security, or phone setup.” is heard. 3. Follow voice guidance instructions, or turn “AUDIO CTRL” knob until “Phone Setup” is displayed and push the knob.

the

“Phone setup. Push the talk switch and say pair phone, select phone, change name, list phones, set passkey or delete.” is heard. “XXX (phone name) already selected.” is heard and “XXX (phone name)” is dis- played. If no phone has been registered, the sys- tem may not function properly.

To pair phones 1. Push

the

talk switch and say “Pair “AUDIO CTRL” is displayed

turn

phone”, or knob until “Pair Phone” and push the knob.

the

the

talk switch and say a

“Pair. Push name for the phone.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until “Re- cord Name” the knob and say (desired phone name)”.

is displayed, push

“XXX

the talk switch and say confirm.

“Push Otherwise, say go back.” is heard. 3. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Confirm” knob.

“XXX Ready for phone pairing. Please use the phone to connect it to the hands−free system. The passkey for the phone is....” is heard. After “HANDS FREE” is displayed, a pass- key∗ is heard.

is displayed and

“Searching.”

4. Input phone.

the displayed passkey

into the

“The phone is paired and ready for use. Returning to the main menu.” is heard and “Paired” is displayed. The system may not function in the follow- ing cases: D If 6 phones have already been regis-

tered.

D If the vehicle is moving. D If the system cannot communicate with

the phone.

∗: Passkey is a password required to reg- ister a phone to the system.

INFORMATION

D To use the hands−free system, you need to register your phone in the system. Once you have registered it, you can make a hands−free call. Up to 6 phones can be registered.

D For the operation of the phone, see the manual that comes with your cellular phone.

D The passkey can be changed. See

page 220 for changing the passkey.

217

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

To select a phone 1. Push the talk switch and say “Select “AUDIO CTRL” phone”, or knob until “Select Phone” is displayed and push the knob.

turn

the

“Select phone. Push the talk switch and say the phone name or say list phones.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until the desired phone name is displayed and push the knob.

When the phone is selected by a voice command: “XXX Push the talk switch and say con- firm. Otherwise, say go back.” is heard and “XXX” is displayed. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until “Confirm” is displayed and push the knob. “XXX selected. Returning to setup.” is heard.

the phone

218

’07Camry hybrid_U (L/O 0610)

When the phone is selected by using the knob: “XXX selected. Returning setup.” is heard. The system may not function in the follow- ing cases: D If the phone is not found. D If the system does not recognize the

the phone

to

voice command.

To change a name 1. Push the talk switch and say “Change name”, or turn the “AUDIO CTRL” knob until “Change Name” is displayed and push the knob.

“Change name. Push the talk switch and say the phone name to change.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until the phone name that you want to change is displayed and push the knob.

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

When the phone is selected by a voice command: “XXX Push the talk switch and say con- firm. Otherwise, say go back.” is heard and “XXX” is displayed. 1. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Confirm” knob.

When the phone is selected by using the knob: “XXX Push the talk switch and say con- firm. Otherwise, say go back.” is heard and “XXX” is displayed. 1. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Confirm” knob.

the

talk switch and say a new

“Push name.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until “Re- cord Name” the knob and say (desired phone name)”.

is displayed, push

“XXX

the

talk switch and say a new

“Push name.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until “Re- cord Name” the knob and say (desired phone name)”.

is displayed, push

“XXX

“XXX Push the talk switch and say con- firm. Otherwise, say go back.” is heard. 3. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Confirm” knob.

“XXX Push the talk switch and say con- firm. Otherwise, say go back.” is heard. 3. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Confirm” knob.

“Name changed. Returning to the phone setup.” is dis- played.

is heard and “Changed”

“Name changed. Returning to the phone setup.” is dis- played.

is heard and “Changed”

The system may not function in the follow- ing cases: D If no phone has been registered. D If the system does not recognize the

voice command.

To list phones 1. Push

the

talk switch and say

“List the “AUDIO CTRL” is displayed

turn

phones”, or knob until “List Phones” and push the knob.

“List phones. To select a name, push the talk switch during the name playback.” is heard. 2. Follow voice guidance instructions. “Push talk switch and say select phone, change name, or delete.” is heard. Select one of the following:

the

219

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

When using the knob: 1. Turn the “AUDIO CTRL” knob to select the “AUDIO CTRL”

a number. Push knob to set.

2. When

the passkey “AUDIO CTRL” knob.

is set, push

the

“Passkey changed. Returning to the phone setup.” is heard. The system may not function in the follow- ing cases: D If the passkey has less than 4 digits. D If the passkey has more than 8 digits.

To set a passkey 1. Push

the

talk switch and say

“Set passkey”, or turn the “AUDIO CTRL” knob until “Set PassKey” is displayed and push the knob.

“Set Passkey. The passkey is required for the phone pairing process. Push the talk switch and say a new passkey.” is heard and passkey is displayed. 2. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob to select a number.

When using a voice command: “XXXX (new passkey) Push the talk switch and say confirm. Otherwise, continue add- ing numbers, or say go back or delete.” is heard and “XXXX (new passkey)” is displayed. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until “Confirm” is displayed and push the knob. “Passkey changed. Returning to the phone setup.” is heard.

the

the

“Change Name”

talk switch and say

Select phone Push “Select phone”, or turn the “AUDIO CTRL” knob until “Select Phone” is displayed and push the knob. For further details on selecting a phone, see page 218. Change name Push talk switch and say “Change name”, or turn the “AUDIO CTRL” knob until is displayed and push the knob. For further details on changing a name, see page 218. Delete Push the talk switch and say “Delete”, or turn the “AUDIO CTRL” knob until “Delete” is displayed and push the knob. For further details on deleting a phone, see page 221. If no phone has been registered, the sys- tem may not function properly.

220

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

The system may not function in the follow- ing cases: D If no phone has been registered. D If the system does not recognize the

voice command.

To delete a phone 1. Push the talk switch and say “Delete”, or turn the “AUDIO CTRL” knob until “Delete” the knob.

is displayed and push

“Delete. Push the talk switch and say the phone name to delete.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until the phone name you want to delete is dis- played and push the knob.

When using a voice command: “XXX Push the talk switch and say con- firm. Otherwise, say go back.” is heard and “XXX” is displayed. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until “Confirm” is displayed and push the knob. “Deleted. Returning to the phone setup.” is heard and “Deleted” is displayed. When using the knob: “Deleted. Returning to the phone setup.” is heard and “Deleted” is displayed.

—Security The security menu includes the following: D Set PIN (Personal Identification Num-

ber)

The PIN can be set or changed. D Phone book lock The phone book can be locked. When the phone book is locked, the fol- lowing functions cannot be used: D Dial by name D Redial D Callback D Speed Dial D PhoneBook D Phone book unlock The locked phone book can be unlocked.

221

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

To enter the security menu 1. Push the off−hook switch to turn the

hands−free system on.

2. Follow voice guidance instructions, or “AUDIO CTRL” knob until the

is displayed and push

the

turn “Setup” knob.

“Setup. Please push the talk switch and say security, or phone setup.” is heard. 3. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Security” knob.

“Security. Push the talk switch and say set PIN, phone book lock, or phone book unlock.” is heard.

222

’07Camry hybrid_U (L/O 0610)

To set a PIN Push the talk switch and say “Set PIN”, or turn the “AUDIO CTRL” knob until “Set PIN” is displayed and push the knob. “There is no PIN number set. Please reg- ister a PIN number. Please push the talk switch and say a four−digit PIN number.” is heard.

When using a voice command: 1. Push

talk switch and say “XXX

the

(new PIN number)”.

2. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Confirm” knob.

“The PIN number has been set. Returning to the security.” is heard and “Completed” is displayed. When using the knob: 1. Turn the “AUDIO CTRL” knob to select the “AUDIO CTRL”

a number. Push knob to set.

2. Repeat the above procedure until the

entire four−digit number is set.

3. When the PIN is set, push the “AUDIO

CTRL” knob.

4. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Confirm” knob.

“The PIN number has been set. Returning to the security.” is heard and “Completed” is displayed.

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

If the PIN is to be changed: “There is a PIN number in place. Push the talk switch and say the correct PIN number.” is heard and “Current PIN?” is displayed. 1. Follow voice guidance instructions, or use the “AUDIO CTRL” knob to input the current PIN number.

“Please push the talk switch and say a four−digit PIN number.” is heard. 2. Push the talk switch and say “XXXX

(new PIN number)”.

“The PIN number has been set. Returning to the security.” is heard and “Completed” is displayed. If the current number is not correct, the system does not function properly.

To lock the phone book 1. Push the talk switch and say “Phone book lock”, or turn the “AUDIO CTRL” knob until “Phbk Lock” is displayed and push the knob.

“There is a PIN number in place. Push the talk switch and say the correct PIN number.” is heard and “Current PIN?” is displayed. 2. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob to select a number.

When using a voice command: “XXXX Push the talk switch and say con- firm. Otherwise, say go back.” is heard and “XXXX” is displayed. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until “Confirm” is displayed and push the knob. “PIN number accepted. The phone book is now locked. Returning to the main menu.” is heard and “Locked” is displayed. When using the knob: 1. Turn the “AUDIO CTRL” knob to select the “AUDIO CTRL”

a number. Push knob to set.

2. When the PIN number is set, push the

“AUDIO CTRL” knob.

“XXXX Push the talk switch and say con- firm. Otherwise, say go back.” is heard and “XXXX” is displayed. 3. Follow voice guidance instructions, or “AUDIO CTRL” knob until the is displayed and push

turn the “Confirm” knob.

“PIN number accepted. The phone book is now locked. Returning to the main menu.” is heard and “Locked” is displayed.

223

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

The system may not function in the follow- ing cases: D If the current number is not correct. D If the phone book has already been

locked.

D If the PIN number does not exist. To unlock the phone book 1. Push the talk switch and say “Phone book unlock”, or “AUDIO CTRL” knob until “Phbk Unlock” is dis- played and push the knob.

turn

the

“Phonebook unlock. There is a PIN num- ber in place. Push the talk switch and say the correct PIN number.” is heard and “Current PIN?” is displayed. 2. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob to select a number.

224

When using a voice command: “XXXX Push the talk switch and say con- firm. Otherwise, say go back.” is heard and “XXXX” is displayed. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until “Confirm” is displayed and push the knob. “PIN number accepted. The phone book is the main now unlocked. Returning menu.” is dis- played. When using the knob: 1. Turn the “AUDIO CTRL” knob to select the “AUDIO CTRL”

is heard and “Unlocked”

to

a number. Push knob to set.

2. When the PIN number is set, push the

“AUDIO CTRL” knob.

“XXXX Push the talk switch and say con- firm. Otherwise, say go back.” is heard and “XXXX” is displayed. 3. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Confirm” knob.

“PIN number accepted. The phone book is the main now unlocked. Returning menu.” is dis- played.

is heard and “Unlocked”

to

The system may not function in the follow- ing cases: D If the current number is not correct. D If the phone book has already been

unlocked.

INFORMATION

is available. Enter

A shortcut to each of the following functions the phone book menu, push the off−hook switch, and say either of the follow- ing: D Phone book lock D Phone book unlock

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

—System Setup The system setup menu includes the fol- lowing: D Adjust Guidance Volume D Initialize To enter the system setup menu 1. Push the off−hook switch to turn the

hands−free system on.

2. Follow voice guidance instructions, or “AUDIO CTRL” knob until the

is displayed and push

the

turn “Setup” knob. 3. Turn

the

“AUDIO CTRL” knob until “System Setup” is displayed and push the knob.

“System setup. Please select guidance volume or initialize.” is heard. To adjust the guidance volume 1. Turn

“AUDIO CTRL” knob until “Guidance Vol” is displayed and push the knob.

the

“Guidance will be at this volume” is heard and the present volume level is displayed. 2. Turn the “AUDIO CTRL” knob to adjust

the volume and push the knob.

’07Camry hybrid_U (L/O 0610)

To initialize 1. Turn the “Initialize” knob.

“AUDIO CTRL” knob until is displayed and push the

“System initialization. This will erase all user information in the hands free system; including paired phones, phone book en- tries, and call history. Select confirm to initialize. Otherwise, select go back.” is heard. 2. Turn

“AUDIO CTRL” knob until is displayed and push the

the “Confirm” knob.

“System initialization. This will erase all user information in the hands free system; including paired phones, phone book en- tries, and call history. Select confirm to initialize. Otherwise, select go back.” is heard. 3. Turn

“AUDIO CTRL” knob until is displayed and push the

the “Confirm” knob.

“Initialized. Returning to the main menu.” is heard.

—Phone Book The phone book menu includes the follow- ing: D Add Entry Phone numbers and voice tags can be registered. D Change Name The registered names can be changed. D Delete Entry The registered names can be deleted. D Delete Speed Dial The registered speed dial can be deleted. D List Names The registered names can be checked. D Set Speed Dial Speed dials can be set.

225

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

To enter the phone book menu 1. Push the off−hook switch to turn the

hands−free system on.

2. Follow voice guidance instructions, or turn “AUDIO CTRL” knob until “Phonebook” is displayed and push the knob.

the

“Phone book. Please push the talk switch and say add entry, change name, delete entry, list names, set speed dial or delete speed dial.” is heard. If the phone book is locked, the system may not function properly.

To add entry The add entry includes the following: (a) By Voice (b) By Phone (c) Call History (d) Manual Input Push the talk switch and say “Add entry”, or turn the “AUDIO CTRL” knob until “Add Entry” is displayed and push the knob. “Add Entry. How will the number be en- tered. Push the talk switch and say by voice, by phone, or call history.” is heard.

(a) By voice 1. Push the

talk switch and say

“By voice”, or turn the “AUDIO CTRL” knob until “By Voice” is displayed and push the knob.

“Voice entry. Push the talk switch and say the number.” is heard. 2. Push the talk switch and say the dial

number that you want to register.

“To store, push the talk switch and say confirm. Otherwise, continue adding num- bers, or say go back, or delete.” is heard and number is displayed. 3. Follow voice guidance instructions.

226

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

If “Confirm” is said, then input a voice tag. “Push the talk switch and say a name.” is heard. 1. Push the talk switch and say the name of the dial number that you want to register.

“XXXX Push the talk switch and say con- firm. Otherwise, say go back.” is heard. 2. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Confirm” knob.

“Stored. To register this as a speed dial entry, push the talk switch and say set speed dial. Otherwise, say confirm.” is heard and “Stored” is displayed. 3. Select one of the following: D Confirm D Speed Dial

the

“AUDIO CTRL”

Confirm Push the talk switch and say “Confirm”, or turn knob until “Confirm” is displayed and push the knob. “Returning to the phone book.” is heard. Speed Dial 1. Push

“Set speed dial”, or turn the “AUDIO CTRL” knob until “Speed Dial” is displayed and push the knob.

talk switch and say

the

“Set speed dial. Push the preset button to assign to XXXX” is heard. 2. Push and hold the desired preset but-

ton.

“preset... is now assigned. Returning to the phone book.” is heard. The system may not function in the follow- ing cases: D If the phone book is full. D If the dial number has more than 24

digits.

(b) By Phone 1. Push the

talk switch and say

“By “AUDIO CTRL” phone”, or knob until “By Phone” is displayed and push the knob.

turn

the

“Phone entry. Prepare to send the informa- tion from the phone. When ready, push the talk switch and say confirm.” is heard. 2. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Confirm” knob.

is

the

this

time.”

information at

“Send heard. After the system has received the name and phone number, “Push the talk switch and say confirm. To select an alternate number, say next or previous. Otherwise, say go back.” is heard and “XXX (name)” and “XXX (number)” is displayed. 3. Follow

instructions, push the talk switch and say “Confirm”, or turn the “AUDIO CTRL” knob until the dial number that you want to regis- ter is displayed and push the knob.

voice guidance

Next, input a voice tag. For further details, see page 226.

227

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

Outgoing 1. Push the talk switch and say “Outgoin- turn the “AUDIO CTRL” knob g”, or until “Outgoing” is displayed and push the knob.

the outgoing number

“Most recent outgoing call was XXXX” is heard and is dis- played. “Push the talk switch and say confirm. Otherwise, say previous, or go back.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until the dial number that you want to register is displayed and push the knob.

Next, input a voice tag. For further details, see page 226.

(c) Call History 1. Push the talk switch and say “Call his- tory”, or turn the “AUDIO CTRL” knob until is displayed and push the knob.

“Call history”

“Call history. Push the talk switch and say incoming or outgoing.” is heard and “Call History” is displayed. 2. Select one of the following: D Incoming D Outgoing Incoming 1. Push the talk switch and say “Incom- ing”, or turn the “AUDIO CTRL” knob until “Incoming” is displayed and push the knob.

“Most recent incoming call was XXXX” is heard and the incoming number is dis- played. “Push the talk switch and say confirm. Otherwise, say previous, or go back.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until the dial number that you want to register is displayed and push the knob.

Next, input a voice tag. For further details, see page 226. 228

(d) Manual Input 1. Turn

the

“AUDIO CTRL” knob until “Manual Input” is displayed and push the knob.

2. Turn the “AUDIO CTRL” knob to select the “AUDIO CTRL”

a number. Push knob to set.

is set, push

3. When

the number “AUDIO CTRL” knob. Next, input a voice tag. For further details, see page 226.

the

INFORMATION

D The system can recognize single digits from zero to nine, # (pound), ∗ (star) and + (plus). Numbers that are ten or greater are not recog- nized.

D To speed up input, it is a good idea to group all digits into a continuous string. However, you can enter each digit individually or group digits to- gether in preferred string lengths.

The display corresponding to each op- eration appears on the screen as fol- lows:

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

Display: “995” Repeating the above operation deletes the last digits in reverse order of in- put. Delete operation— You say: “Delete” Voice output: “Deleted. Push the talk switch and say the number.” Display: “Delete” The display will return to the initial screen that allows a number to be input.

Input operation— You say: “Nine, nine, five” Voice output: “995 to store push the talk switch and say confirm. Other- wise, continue adding numbers, or say go back, or delete.” Display: “995” You say: “Seven, three, four” Voice output: “734 to store push the talk switch and say confirm. Other- wise, continue adding numbers, or say go back, or delete.” Display: “995734” Repeat the above procedure until the entire number that you want to regis- ter is input. Go back operation— You say: “Go back” Voice output: “Go back. The last num- bers said have been removed. Push the talk switch and say the number.”

To list names The voice tags can be edited during the name playback. 1. Push

talk switch and say

the

turn

names”, or knob until “List Names” and push the knob.

the

“List “AUDIO CTRL” is displayed

“List names. To select a name, push the talk switch during the name playback.” is heard. 2. Follow voice guidance instructions. “XXXX selected.” is heard and “Selected” is displayed. If you push the off−hook switch during the name playback, you can dial the number of the selected name.

229

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

Editing the voice tags The following can be performed: D Dial D Change Name D Delete Entry D Speed Dial “Push the talk switch and say dial, change name, delete entry, or set speed dial.” is heard and “Selected” is displayed. Dial Push the talk switch and say “Dial”, or turn the “AUDIO CTRL” knob until “Dial” is displayed and push the knob. Change Name talk switch and say “Change Push name”, or turn the “AUDIO CTRL” knob until is displayed and push the knob. For further details, see page 231.

“Change Name”

the

230

’07Camry hybrid_U (L/O 0610)

the

talk switch and say

Delete Entry Push “Delete entry”, or turn the “AUDIO CTRL” knob until “Delete Entry” is displayed and push the knob. For further details, see page 230. Speed dial Push the talk switch and say “Set speed dial”, or turn the “AUDIO CTRL” knob until “Speed Dial” is displayed and push the knob. For further details, see page 232.

To delete entry 1. Push the talk switch and say “Delete entry”, or turn the “AUDIO CTRL” knob until “Delete Entry” is displayed and push the knob.

“Delete entry. Push the talk switch and say the name to delete.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until the name that you want to delete is dis- played and push the knob.

When using a voice command: “XXXX Push the talk switch and say con- firm. Otherwise, say go back.” is heard and “XXXX” is displayed. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until “Confirm” is displayed and push the knob. “Deleted. Returning to the phone book.” is heard and “Deleted” is displayed. When using the knob: “Deleted. Returning to the phone book.” is heard and “Deleted” is displayed. The system may not function in the follow- ing cases: D If no name has been registered. D If the system does not recognize the

voice command.

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

To change name 1. Push the talk switch and say “Change name”, or turn the “AUDIO CTRL” knob until “Change Name” is displayed and push the knob.

“Change name. Push the talk switch and say the name to change.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until the dial number that you want to change is displayed and push the knob.

To delete speed dial 1. Push the talk switch and say “Delete speed dial”, or turn the “AUDIO CTRL” knob until “Del Spd Dial” is displayed and push the knob.

“Delete speed dial. Push the preset button to delete from speed dial.” is heard. 2. Select the preset button that you want

to delete.

“To delete preset... push the talk switch and say confirm. Otherwise, say go back.” is heard. 3. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Confirm” knob.

“Deleted.” is heard and “Deleted” is dis- played. “Returning to the phone book.” is heard. The system may not function in the follow- ing cases: D If no speed dial has been registered. D If the preset button has not been as-

signed.

When using a voice command: “XXXX Push the talk switch and say con- firm. Otherwise, say go back.” is heard and “XXXX” is displayed. 1. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Confirm” knob.

the

talk switch and say a new

“Push name.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until “Re- cord Name” the is displayed, push knob and say “XXX (new name)”.

“XXXX Push the talk switch and say con- firm. Otherwise, say go back.” is heard. 3. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Confirm” knob.

“Name changed. Returning to the phone book.” is dis- played.

is heard and “Changed”

231

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

To set speed dial 1. Push

the

talk switch and say

“Set Speed dial”, or turn the “AUDIO CTRL” knob until “Speed Dial” is displayed and push the knob.

“Set speed dial. Push the talk switch and say a name.” is heard. 2. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until the dial number that you want to register is displayed and push the knob.

the

talk switch and say a new

When using the knob: “Push name.” is heard. 1. Follow voice guidance instructions, or turn the “AUDIO CTRL” knob until “Re- cord Name” is displayed, push the knob and say “XXX (new name)”.

“XXXX Push the talk switch and say con- firm. Otherwise, say go back.” is heard. 2. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Confirm” knob.

is heard and “Changed”

“Name changed. Returning to the phone book.” is dis- played. The system may not function in the follow- ing cases: D If no name has been registered. D If the system does not recognize the

voice command.

232

When using a voice command: “XXXX To register this as a speed dial entry, push the talk switch and say con- firm. Otherwise, push the talk switch and say go back.” is heard and “XXXX” is displayed. 1. Follow voice guidance instructions, or “AUDIO CTRL” knob until the is displayed and push

turn the “Confirm” knob.

the preset button

“Push XXXX” is heard. 2. Push and hold the desired preset but-

to assign

to

ton.

to

to assign

the preset button

“preset... is now assigned. Returning to the phone book.” is heard. When using the knob: “Push XXXX” is heard. Push and hold the desired preset button. “preset... is now assigned. Returning to the phone book.” is heard. The system may not function in the follow- ing cases: D If no name has been registered. D If the system does not recognize the

voice command.

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

INFORMATION

A shortcut to each of the following functions is available. Push the off− hook switch and talk switch, and say one of the following: D Phone book add entry D Phone book change name D Phone book delete entry D Phone book delete speed dial D Phone book list names D Phone book set speed dial

—Redial The following can be performed: D Dial D Delete D Store To enter the redial 1. Push the off−hook switch to turn the

hands−free system on.

2. Follow voice guidance instructions, or “AUDIO CTRL” knob until the

is displayed and push

the

turn “Redial” knob.

“Redial. Most recent outgoing call was XXXX” is heard and outgoing history is displayed. “Please push the off−hook switch to dial. Otherwise, push the talk switch and say dial, previous, go back, store, or delete.” is heard.

the “AUDIO CTRL” knob until

Dial Turn the number that you want to dial is displayed and push the knob. After that, do the one of the following: D Push the off−hook switch. D Push the talk switch and say “dial”. D Turn

“AUDIO CTRL” knob until “Dial” is displayed and push the knob.

the

Delete 1. Turn the “AUDIO CTRL” knob until the dial number that you want to delete is displayed and push the knob.

2. Push the talk switch and say “Delete”, or turn the “AUDIO CTRL” knob until “Delete” the knob.

is displayed and push

“Delete. Push the talk switch and say con- firm. Otherwise, say go back” is heard. 3. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Confirm” knob.

“Deleted.” is heard.

233

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

INFORMATION

D Up to five outgoing calls can be

stored in the system.

D When five outgoing calls are stored in memory, the oldest outgoing call is deleted to make room in memory for new calls.

D Only

the

latest outgoing call

is telephone

stored when number is dialed.

the same

D A shortcut to “Redial” is available.

Push the off−hook switch twice.

Store 1. Turn the “AUDIO CTRL” knob until the dial number that you want to register is displayed and push the knob.

2. Push the talk switch and say “Store”, or turn the “AUDIO CTRL” knob until “Store” is displayed and push the knob. “Store. Push the talk switch and say con- firm. Otherwise, say go back.” is heard. 3. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Confirm” knob.

Next, input a voice tag. For further details, see page 226. The system may not function in the follow- ing cases: D If there is no outgoing history. D If the phone book is locked.

234

—Callback The following can be performed: D Dial D Delete D Store To enter the callback 1. Push the off−hook switch to turn the

hands−free system on.

2. Follow voice guidance instructions, or turn “AUDIO CTRL” knob until “Callback” is displayed and push the knob.

the

“Callback. Most recent incoming call was XXXX” is heard and incoming history is displayed. “Please push the off−hook switch to dial. Otherwise, push the talk switch and say dial, previous, go back, store, or delete.” is heard.

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

the “AUDIO CTRL” knob until

Dial Turn the number that you want to dial is displayed and push the knob. After that, do the one of the following: D Push the off−hook switch. D Push the talk switch and say “Dial”. D Turn

“AUDIO CTRL” knob until “Dial” is displayed and push the knob.

the

Delete 1. Turn the “AUDIO CTRL” knob until the dial number that you want to delete is displayed and push the knob.

2. Push the talk switch and say “Delete”, or turn the “AUDIO CTRL” knob until “Delete” the knob.

is displayed and push

“Delete. Push the talk switch and say con- firm. Otherwise, say go back” is heard. 3. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Confirm” knob.

“Deleted.” is heard.

Store 1. Turn the “AUDIO CTRL” knob until the dial number that you want to register is displayed and push the knob.

2. Push the talk switch and say “Store”, or turn the “AUDIO CTRL” knob until “Store” is displayed and push the knob. “Store. Push the talk switch and say con- firm. Otherwise, say go back.” is heard. 3. Follow voice guidance instructions, or “AUDIO CTRL” knob until is displayed and push the

turn the “Confirm” knob.

Next, input a voice tag. For further details, see page 226. The system may not function in the follow- ing cases: D If there is no incoming history. D If the phone book is locked.

INFORMATION

D Up to five incoming calls can be

stored in the system.

D When five incoming calls are stored in memory, the oldest incoming call is deleted to make room in memory for new calls.

—Making a phone call If the cellular phone is not registered, this system cannot be used. See page 216 for registering a cellular phone. Make sure that “BT” is displayed and get the cellular phone ready to use. There are 3 ways to make a phone call with this system. D Speed dial A phone call can be made with a preset button in which a phone number is regis- tered. See page 232 for setting the preset buttons. D Dial by Name The system dials the numbers correspond- ing to the spoken names registered in the system. D Dial by Number The system dials to the spoken numbers. To make a phone call Push hands−free system on.

the off−hook switch

turn

the

to

235

2007 CAMRY HV from Oct. ’06 Prod. (OM33749U)

’07Camry hybrid_U (L/O 0610)

When using a voice command: “XXXX Push the off−hook switch to dial. Otherwise, push the talk switch and say dial, or go back.” is heard. After that, do the one of the following: D Push the off−hook switch. D Push the talk switch and say “Dial”. D Turn

“AUDIO CTRL” knob until “Dial” is displayed and push the knob.

the

When using the knob: It calls the number. The system may not function in the follow- ing cases: D If there is no number registered in the

preset button.

D If the system does not recognize the

voice command.

To speed dial 1. Push the preset button where the de- sired number is set. The name or tele- phone number is displayed.

2. Push the off−hook switch to dial. To dial by Name 1. Push the talk switch and say “Dial by

name”.

the

“Dial by name. Please push talk switch and say the stored name, or say list names.” is heard and “Dial by Name” is displayed. 2. Push the talk switch and say “XXXX”, or turn the “AUDIO CTRL” knob until the phone name that you want to dial is displayed and push the knob.

236

INFORMATION

D The phone numbers registered the phone book can be retrieved.

in

D The system does not recognize that the voice tag is not registered in the registered cellular phone. For details about voice tags, see “To add entry” on page 226.

D A shortcut to “Dial by name”