2011 Subaru Tribeca Owners Manual

(9) Disc select button (10) Load button

NOTE . Be sure to insert a disc with the label side up. If you insert the disc the label side down, “CHECK DISC” will appear on the display and the player will not play anything. . If a disc is inserted during a radio broadcast, the disc will interrupt the broadcast. . The player is designed to be able to play music CD-Rs and music CD-RWs, but it may not be able to play certain ones. . CDs (i.e., 8 cm/3 inch CDs) are not supported, and if inserted, they will be immediately ejected. . Insert discs slowly, one at a time. Inserting discs one over another could result in malfunction of the CD chan- ger.

– CONTINUED –

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

5-22 Audio

insert

! How to insert a CD(s) ! Inserting a CD 1. Briefly press the “LOAD” button (10). If the magazine in the player has an idle position where you can insert a disc, the disc number indicator associated with the idle position will blink. If no indicator blinks, it means that there is no idle position in the magazine. 2. After the disc number indicator has started to flash, the disc when “LOAD” flashes on the display. The disc will then be automatically drawn in, and the player will begin to play back the first track of the disc. . To insert more discs in succession, repeat Steps 1 and 2. The magazine will be loaded with discs in the ascending order of position number. If you do not insert any disc in 15 seconds after you have pressed the “LOAD” button, the player will begin to play back the first track of the last disc you have inserted. . The disc indicator steadily lights up if a disc is already inserted in the correspond- ing position of the magazine. . While the player is in the loading mode, if you press “FM AM” button, the player will enter the standby mode. Press the “CD” button (1) to start playback.

! Inserting a disc in a desired position 1. Briefly press the “LOAD” button (10). If the magazine in the player has an idle position where you can insert a disc, the disc number indicator associated with the idle position will blink. The positions in the magazine the indica- tor of which steadily lights up are already loaded with discs. 2. Press the disc select button (9) at the position where you want to insert a disc. Insert the disc when “LOAD” flashes 3. on the display. The disc will then be automatically drawn in, and the player will begin to play the first track on the disc. . If you wish to insert another disc, repeat the procedure beginning with step 1. If you do not insert any disc in 15 seconds after you have pressed the “LOAD” button, the player will begin to play back the first track of the last disc you have inserted. . While the player is in the loading mode, if you press “FM AM” button, the player will enter standby mode. Press the “CD” button (1) to start playback.

! Loading all the magazine (full disc

loading mode) If you continue to press the “LOAD”

1.

Black plate (210,1)

button (10) for more than 1.5 seconds, the player will produce beep sound and will enter the full disc loading mode. 2. A “disc number” indicator will blink, and “ALL LOAD” will be on display for a period of 15 seconds. If a disc is success- fully loaded during this period, the disc number indicator will stop blinking and will steadily light. 3. When the loading of a disc is com- plete, the next disc number indicator will blink. Then repeat Step 2. 4. When the magazine is filled with discs by repeating Steps 2 and 3, the player will start playback of the discs, beginning with the one inserted first.

If you fail to insert any disc during each 15
seconds interval, the full disc loading mode will be canceled, and the player will start playback of the disc inserted first. ! How to play back a CD or make a

pause

! When there is no CD inserted: Properly insert a CD. Refer to “How to insert a CD(s)” F5-22. When a CD is loaded, the player will start playback of the CD, beginning with the first track.

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

! When there are CDs loaded: Press a desired one of the disc select buttons (9) the disc number indicator of which steadily lights up. The player will then start playback of the selected CD, beginning with the first track. If a disc that the player cannot read has been loaded, “CHECK DISC” will appear on the display and the player will not play anything. ! To select a song from its beginning ! Forward direction Briefly press the “ ” side of the “TUNE TRACK” button (2) to skip to the beginning of the next track/file (track). Each time the button is pressed, the indicated track/file (track) number will increase. NOTE In an MP3 folder, skipping past the last track/file (track) will take you back to the first track/file (track) in the folder. ! Backward direction Briefly press the “ ” side of the “TUNE TRACK” button (2) to skip to the beginning of the current track/file (track). Each time the button is pressed, the indicated track/ file (track) number will decrease.

NOTE In an MP3 folder, skipping past the first track/file (track) will take you to the last track/file (track) in the folder. ! Fast-forwarding and rewinding ! Fast-forwarding Press the “ ” side of the “TUNE TRACK” button (2) continuously to fast-forward the track/file. Release the button to stop fast-forwarding. NOTE If you fast-forward to the end of the last track/file (track), fast-forwarding will stop and the player will start playback beginning with the first track/file (track). ! Rewinding Press the “ ” side of the “TUNE TRACK” button (2) continuously to rewind the track/ file. Release the button to stop rewinding. NOTE If you rewind to the beginning of the first track/file (track), the rewinding will stop and the player will start playback.

Black plate (211,1)

Audio 5-23

! Repeating ! To repeat the currently playing track/

file (track)

To repeat a track/file (track), briefly press the “RPT” button (6) while the track/file (track) is playing. The display will show “RPT”, and the track/file (track) will be repeated. To cancel the track/file (track) repeat-play mode, briefly press the “RPT” button twice. The “RPT” indication will turn off, and the normal playback mode will be resumed. NOTE . Each time you briefly press the button, the mode will change to the next one in the following sequence.

If you accidentally press the button and cancel the track/file (track) repeat-play mode, press it again to reselect the repeat-play mode. . The repeat-play mode will be can- celled if you perform any of the follow- ing steps.

– Press the “RDM” button – Press the “SCAN” button – Press the “

” button

– CONTINUED –

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

5-24 Audio

Black plate (212,1)

– Press the disc select button – Select the radio mode – Press the “RSE AUX” button – Press the “ “SEEK FLDR” button (MP3 disc) – Turn off the power of the audio equipment – Turn the ignition switch to the “LOCK” position

” side of the

” or “

! To repeat the currently playing disc/

folder

the disc/folder

To repeat the currently playing disc/folder, press the “RPT” button (6) twice while a track/file (track) is playing. The display will show “D-RPT”, and the disc/folder will be played repeatedly. To cancel repeat-play mode, press the “RPT” button once more. The “D-RPT” indication will turn off, and the normal playback mode will be re- sumed. NOTE . Each time you briefly press the button, the mode will change to the next one in the following sequence.

If you accidentally press the button and cancel the disc/folder repeat-play

mode, press it again to reselect the disc/folder repeat-play mode. . The disc/folder repeat-play mode will be cancelled if you perform any of the following steps.

” or “

” button

” side of the

– Press the “RDM” button – Press the “SCAN” button – Press the “ – Press the disc select button – Select the radio mode – Press the “RSE AUX” button – Press the “ “SEEK FLDR” button (MP3 disc) – Turn off the power of the audio equipment – Turn the ignition switch to the “LOCK” position ! Random playback ! Non-MP3 disc Press the “RDM” button (5) briefly during disc playback to play all of the tracks on the disc in a random order. The display will show “RDM”, and all of the tracks on the disc will be played in a random order. To cancel random mode, press the button again. The “RDM” indication will turn off, and the normal playback mode will be resumed.

” or “

the audio

the power of

” side of the

NOTE Random playback will be cancelled if you perform any of the following steps. . Press the “RPT” button . Press the “SCAN” button . Press the “ ” button . Select the radio mode . Press the “RSE AUX” button . Press the “ “SEEK FLDR” button . Turn off equipment . Turn the ignition switch to the “LOCK” position ! MP3 disc Press the “RDM” button (5) during disc playback to play all of the tracks in the folder currently being played in random order. Press the “RDM” button again to play all of the tracks on the disc in random order. The display will show “RDM” during the random mode. To cancel the random mode, press the “RDM” button during “in-disc” random playback. The “RDM” indication will turn off, and the normal playback mode will be resumed. NOTE . Each time you briefly press the button, the mode will change to the

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

” side of the

normal playback will be resumed. To cancel the scan mode, press the button again. NOTE The scan mode will be cancelled if you perform any of the following steps. . Press the “RPT” button . Press the “RDM” button . Press the “ ” or “ “TUNE TRACK” button . Press the “ ” or “ “SEEK FLDR” button (MP3 disc) . Press the “ . Press the disc select button . Select the radio mode . Press the “RSE AUX” button . Turn off equipment . Turn the ignition switch to the “LOCK” position ! Display selection (MP3 disc) If you press the “AUDIO” button (3) during playback, the indication will change to the next one in the following sequence.

” side of the

the power of

the audio

” button

next one in the following sequence.

If you accidentally press the button and cancel the random mode, press it again to reselect the random mode. . Random playback will be cancelled if you perform any of the following steps.

– Press the “RPT” button – Press the “SCAN” button – Press the “ ” button – Select the radio mode – Press the “RSE AUX” button – Press the “ ” or “ “SEEK FLDR” button – Turn off the power of the audio equipment – Turn the ignition switch to the “LOCK” position

” side of the

! SCAN The scan mode lets you listen to the first 10 seconds of each track/file (track) in succession. Press the “SCAN” button (7) to start scanning upward beginning with the track/file (track) following the currently selected one. When all tracks/files (tracks) in the disc/folder have been scanned,

Black plate (213,1)

Audio 5-25

! Page (track/folder title) scroll (MP3

disc)

If, having pressed the “AUDIO” button (3) to select track title or folder title display, you press the “AUDIO” button again for less than 0.5 second, the title will be scrolled so you can see all of it. You will see eight characters at a time. NOTE The display is designed to show titles for up to three pages (64 characters in total). ! Folder selection (MP3 disc) Press the “ ” side of the “SEEK FLDR” button (4) briefly to select the next folder. Pressing the “ ” side of the same button the first time makes the player go back to the beginning of the currently selected file; pressing it a second time makes it go back to the previously selected file. NOTE Only MP3 folders are recognized when an attempt to select the next or pre- vious folder is made. If no appropriate folder exists on the disc, pressing the “ ” side of the “SEEK FLDR” button has no effect.

” or “

– CONTINUED –

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

Black plate (214,1)

5-26 Audio

! How to unload CDs from the player ! Ejecting a CD from the player Of the discs loaded, you can select and remove only one disc. 1. Use the disc select button (9) to select the disc to be ejected. 2. Briefly press the “ ” button (8). The selected disc will be ejected. The disc number indicator will this time. When you remove the ejected disc, the disc number indicator will turn off.

flash at

the player is in all disc ejection mode, the mode will be cancelled following ejection of the disc that is currently being ejected. . If you press the “CD” button while the player is in all disc ejection mode, the player will draw in the discs that have been ejected and play them.

Audio control buttons

These buttons are located on the spokes of the steering wheel. They allow the driver to control audio functions without taking his/her hands off the steering wheel.

& MODE button

To remove more discs in succession, repeat Steps 1 and 2. ! Ejecting all discs from the player (all

disc ejection mode) If you continue to press the “

” button 1. (8), the player will produce beep sound and will enter the all disc ejection mode. 2. Remove the disc that has been ejected. The other discs loaded will then be ejected one after another. If you do not remove the disc that has been ejected, the “All disc ejection mode” will be canceled.

NOTE . Avoid driving the vehicle with a CD sticking out, because vibration might make it fall out. . If you press the “

” button while

This button is used to select the desired audio mode. Each time it is pressed, the mode changes to the next one in the following sequence.

*1: The frequency last received in the selected

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

Black plate (215,1)

Audio 5-27

waveband will be displayed.

*2: Only when a CD is in the player. *3: Only vehicle equipped with RSE (Rear Seat

Entertainment) ” and “

! “

” buttons

file (track); pressing it the second time makes it go back to the previous track/file (track). The track/file (track) number will be shown on the audio display. ! Volume control buttons

! MUTE button

Press the “+” button to increase the volume. Press the “−” button to reduce the volume. A number indicating the volume will be shown on the audio display.

Press this button if you wish to immedi- ately cut the volume to zero. The audio display will show “MUTE”. If you press the button again, the original return and “MUTE” sound volume will turns off. NOTE If your vehicle is equipped with a genuine SUBARU navigation system, the display will show “ ”.

” button to select the next ” button to select

! With radio mode selected Press the “ channel and press the “ the previous channel. That station’s frequency will be shown on the audio display. ! With CD mode selected Press the “ ” button to skip forward in the track/file (track) order. Pressing the “ ” button the first time makes the player go back to the beginning of the current track/

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

5-28 Audio

Auxiliary input jack

3. Play back the portable audio player. Refer the portable audio player.

to the Owner’s Manual

for

NOTE . The output sound of the portable audio player is not loud, and the sound via the vehicle’s speakers that are connected to the vehicle audio set may be very low. If you turn up the volume of the audio set, the volume becomes louder. However, when you change from one portable audio player to another one, the volume levels via the vehicle’s speakers may be signifi- cantly louder compared to the prior device. To avoid a large volume differ- ence, turn down the volume when you change between portable audio players. . In some cases, when the sound volume of the portable audio player is low, the sound becomes bad when you turn up the volume of the vehicle audio system. In this case, adjust the sound volume of the portable audio player. . In some cases, noise occurs be- cause of a bad connection between the portable player and the vehicle audio system. Try cleaning the stereo jack and audio plug. . If noise is not reduced, check for

By connecting a commercial audio pro- duct to the vehicle, such as a portable audio player, you can hear its sound via the vehicle’s speaker. An auxiliary (AUX) input jack is equipped in the lower compartment of the center console. A stereo mini pin plug (3.5ø) can be inserted in this jack. The connection cable is available at electrical appliance or similar stores.

To use the AUX input jack: 1. Connect a portable audio player to the AUX input jack. 2. Press the “RSE AUX” button on the audio control panel to turn on the auxiliary audio input.

Black plate (216,1)

disconnection of the cord or malfunc- tions of the portable player.

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

Precautions to observe when handling a compact disc

Use only compact discs (CDs, CD-Rs and CD-RWs) that have the mark shown in the following illustration. Also, some compact discs cannot be played.

Black plate (217,1)

Audio 5-29

Rear Seat Entertainment (RSE) system operation (if equipped)

If your vehicle is equipped with the Rear Seat Entertainment (RSE) system, you can listen to the audio via the vehicle speakers. Push the “RSE AUX” button to play a DVD using the Rear Seat Entertain- ment system. For detailed operating procedures, refer to the Owner’s Manual supplement for the Rear Seat Entertainment (RSE) system. NOTE . To watch a DVD in the front seats using the monitor of the navigation system, park the vehicle in a safe location and apply the parking brake. Images of the DVD will not be displayed on the front monitor unless the parking brake is applied. . The harman/kardon® audio system is a stereo system with 2 channels. If a harman/kardon® audio system is equipped, the Rear Seat Entertainment (RSE) system may not generate a satisfying realistic sound when playing 5.1 channel audio sources.

– CONTINUED –

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

there are deposits, wipe the disc surface from the center outward with a dry, soft cloth. Be sure not to use a hard cloth, thinner, benzine, alcohol, etc. . Do not use any disc that is scratched, deformed, or cracked. Also, do not use any disc that has a non-standard shape (for example, a heart shape). Malfunctions or problems might result. . A disc is vulnerable to heat. Never keep it either in places exposed to direct sunlight, near heaters or in vehicles parked in the sun or on hot days.

5-30 Audio

If

. You cannot use a DualDisc in the CD player. If you insert a DualDisc into the player, the disc may not come out again, possibly causing the player to malfunction. . In cold and/or rainy weather, dew can form inside the CD player, preventing normal operation. this happens, eject the CD and wait for the player to dry out. . Skipping may occur when the CD player is subjected to severe vibration (for example, when the vehicle is driven on a rough surface). . To remove a disc from the case, press the center of the case and hold both edges of the disc. If the disc surface is touched directly, contamination could cause poor tone quality. Do not touch the disc surface. . Use a clean disc whenever possible. If

Black plate (218,1)

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

Interior light ......................................................... Dome light .......................................................... Cargo area light .................................................. Rear gate light .................................................... Map light............................................................. Automatic ambient light for center console area

6-2
6-2
6-3
6-3
6-3

6-4
(if equipped)...................................................... 6-4
Sun visors ........................................................... 6-5
Sun visor extension plate .................................... 6-5
Vanity mirror with light ........................................ 6-6
Storage compartment ......................................... 6-6
Glove box ........................................................... 6-6
Center console box ............................................. 6-7
Rear console....................................................... 6-8
Overhead console ............................................... 6-8
Cup holder ........................................................... Front passenger’s cup holder .............................. 6-8
6-9
Second-row seat cup holders .............................. 6-9
Third-row seat cup holders.................................. Bottle holders ...................................................... 6-9
Accessory power outlets................................... 6-10
Coat hook ........................................................... 6-12
Shopping bag hook............................................ 6-13
Floor mat ............................................................ 6-13

Black plate (11,1)

Interior equipment

Cargo area cover (if equipped) ......................... Using the cover ................................................. To remove the cover .......................................... To install the cover housing ............................... Convenient tie-down hooks .............................. Under-floor storage compartment .................... HomeLink® Wireless Control System

(if equipped) .................................................... Garage door opener programming in the

U.S.A............................................................... Programming rolling-code-protected garage door openers in the U.S.A. ....................................... Programming for entrance gates and garage door openers in Canada........................................... Programming other devices ............................... Operating the HomeLink® Wireless Control

System............................................................ Reprogramming a single HomeLink® button ....... Erasing HomeLink® button memory.................... In case a problem occurs................................... Rear view camera (if equipped) ........................ How to use the rear view camera ....................... Viewing range on the screen.............................. Help line............................................................

6-14
6-14
6-15
6-15
6-16
6-16

6-17

6-18

6-19

6-20
6-20

6-20
6-20
6-21
6-21
6-21
6-22
6-23
6-24

北米Model "A3160BE-C" EDITED: 2010/ 11/ 17

6-2 Interior equipment

Interior light

When leaving your vehicle, make sure the lights are turned off to avoid battery discharge.

& Dome light

Models with Rear Seat Entertainment

Models without Rear Seat Entertainment 1) ON 2) DOOR 3) OFF

The dome light switch has the following three positions.

ON: The light remains on continuously. OFF: The light remains off. DOOR: The dome light illuminates auto- matically in the following cases. . Any of the doors or the rear gate is opened. . The doors or the rear gate are un- locked using the remote keyless entry transmitter. . The ignition switch is turned from the “Acc” position to the “LOCK” position.

Black plate (222,1)

The automatically illuminated dome light remains on for several seconds and then gradually turns off after all doors and the rear gate are closed. While the light is illuminated, if any of the following opera- tions are performed, the dome light turns off immediately. . The ignition switch is turned from the “LOCK” position to “Acc” or “ON” position. . All doors and the rear gate are locked using the remote keyless entry transmitter.

The setting of the period for which the light remains on (OFF delay timer) can be changed by a SUBARU dealer. Contact the nearest SUBARU dealer for details.

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

& Cargo area light

& Rear gate light

& Map light

Black plate (223,1)

Interior equipment 6-3

1) DOOR 2) OFF 3) ON

The cargo area light switch has the following three positions. DOOR: The light illuminates when the rear gate is opened. The light remains illumi- nated for several seconds and turns off after the rear gate is closed. OFF: The light remains off. ON: The light remains on continuously.

The rear gate light is located inside the vehicle on the rear gate. Push the right side of the switch to turn it on, and push the left side of the switch to turn it off.

To turn on the map light, push the switch. To turn it off, push the switch again.

When leaving the vehicle, make sure the lights are turned off to avoid battery discharge.

Although the map light switches are in the OFF position, the map lights illuminate automatically in the following cases. . Any of the doors or the rear gate is opened.

– The operational/non-operational setting of this function can be changed by a SUBARU dealer. Contact your SUBARU dealer to change the setting. – The factory setting (default setting) for this function is set as “operational”

– CONTINUED –

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

6-4 Interior equipment

(automatic illumination - ON).

. The doors are unlocked using the remote keyless entry transmitter. . The ignition switch is turned from the “Acc” position to the “LOCK” position.

The automatically illuminated map lights remain illuminated for several seconds and then gradually turn off after all doors are closed.

While the lights are illuminated, if any of the following operations are performed, the map lights turn off immediately. . The ignition switch is turned from the “LOCK” position to the “Acc” or “ON” position. . All doors and the rear gate are locked using the remote keyless entry transmitter.

The setting of the period for which the light remains illuminated (OFF delay timer) can be changed by a SUBARU dealer. Con- tact your SUBARU dealer for details. NOTE If any of the doors or the rear gate is not completely closed, the map lights will remain illuminated as a result. However, the map lights are automati- cally turned off by the battery drainage prevention function to prevent the battery from discharging. For details,

Black plate (224,1)

refer to “Battery drainage prevention function” F2-6.

Sun visors

& Automatic ambient light for

center console area (if equipped)

light

” position or “

The automatic ambient illuminates when the ignition switch is in the “ON” position and the light control switch is in the “ ” position. The light dimly illuminates the area around the center console. The light turns off when the light control switch is in the “OFF” position. Also, the brightness of the light is adjusted by the illumination brightness control dial.

To block out glare, swing down the visors. To use the sun visor at a side window, swing it down and move it sideways.

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

& Sun visor extension plate

Black plate (225,1)

Interior equipment 6-5

With the sun visor positioned over the side window, you can use the sun visor extension plate to prevent glare through the gap between the sun visor and center pillar. To use the extension plate, pull it toward the rear of the vehicle. When you have finished using it, stow it by pushing it toward the front of the vehicle.

CAUTION

Do not pull out the extension plate with the sun visor positioned over the windshield. The extension plate would obstruct your view of the rearview mirror.

& Vanity mirror with light

CAUTION

Keep the vanity mirror cover closed while the car is being driven to avoid being temporarily blinded by the glare of bright light.

To use the vanity mirror, swing down the sun visor and open the vanity mirror cover. The light beside the vanity mirror illumi- nates when the mirror cover is opened. NOTE Use of the vanity mirror light for a long period of time while the engine is not running can cause battery discharge.

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

Black plate (226,1)

6-6 Interior equipment

Storage compartment

& Glove box

& Center console box

CAUTION

. Always keep the storage com- partment closed while driving to reduce the risk of injury in the event of sudden stops or an accident.

. Do not store spray cans, contain- ers with flammable or corrosive liquids or any other dangerous items in the storage compart- ment.

Lock

1) 2) Unlock

To open the glove box, pull the handle. To close it, push the lid firmly upward. To lock the glove box, insert the key and turn it clockwise. To unlock the glove box, insert the key and turn it counterclockwise.

The center console box has a two-layer structure consisting of an upper compart- ment and a lower compartment.

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

! Upper compartment

! Lower compartment

& Rear console

Black plate (227,1)

Interior equipment 6-7

1) Upper compartment lock release

1)

Lower compartment lock release

Pull up the upper compartment release to open the upper compartment.

lock

Pull up the lower compartment release to open the lower compartment.

lock

The rear console is located in the back of the center console box. Pull it out to use it.

– CONTINUED –

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

6-8 Interior equipment

& Overhead console

Cup holder

CAUTION

Take care to avoid spills. Beverages, if hot, might burn you or your passengers. Spilled beverages may also damage upholstery or carpets.

& Front passenger’s cup holder

CAUTION

Do not pick up a cup from the cup holder or put a cup in the holder while you are driving, as this may distract you and lead to an accident.

To open the console, push on the lid lightly and it will automatically open.

CAUTION

When your vehicle is parked in the sun or on a warm day, the inside of the overhead console heats up. Avoid storing plastic or other heat- vulnerable or flammable articles such as a lighter in the overhead console.

Black plate (228,1)

The dual cup holder is built into the center console near the select lever.

To access the cup holder, push the release button.

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

& Second-row seat cup holders

& Third-row seat cup holders

Bottle holders

Black plate (229,1)

Interior equipment 6-9

A dual cup holder is built in the armrest.

CAUTION

When a cup containing a beverage is in the cup holder, do not slide or recline any seat. Otherwise, the beverage could spill while driving and, if the beverage is hot, it could scald you.

A cup holder is located at each side of the third-row seat.

CAUTION

When placing a beverage in a cup holder, make sure it is capped. Otherwise, the beverage could spill while driving and, if the beverage is hot, it could scald you.

CAUTION

. Do not pick up a bottle from the bottle holder or put a bottle in the holder while you are driving, as this may distract you and lead to an accident.

. When placing a beverage in a door pocket, make sure it is capped. Otherwise, the beverage could spill when opening/closing the door or while driving and, if the beverage is hot, it could scald you.

The door pocket equipped on each door

– CONTINUED –

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

6-10 Interior equipment

trim can be used to hold beverage bottles and other items.

Accessory power outlets

Power outlets in the center console

Power outlets in the rear cabin

Black plate (230,1)

Accessory power outlets are provided in the center console (lower compartment) and in the rear cabin.

Electrical power (12V DC) from the battery is available at any of the outlets when the ignition switch is in either the “Acc” or “ON” position. You can use an in-vehicle electrical appliance by connecting it to an outlet. The maximum power rating of an appli- ance that can be connected is shown in the following list. Do not use an appliance which exceeds the indicated wattage for each outlet. . The two outlets in the center console: 120W or less (When using appliances connected to two outlets simultaneously, the total power consumed by them must not exceed 120W.) . The two outlets in the rear cabin: 120W or less (When using appliances con- nected to two outlets simultaneously, the total power consumed by them must not exceed 120W.)

CAUTION

. Do not attempt to use a cigarette lighter in the accessory power outlets.

. Do not place any foreign objects,

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

ance.

. If the plug on your electric appli- ance is either too loose or too tight for the accessory power outlet, this can result in a poor contact or cause the plug to get stuck. Only use plugs that fit properly.

. Use of an electric appliance in the accessory power outlet for a long period of time while the engine is not running can cause battery discharge.

. Before driving your vehicle, make sure that the plug and the cord on your electrical appliance will not interfere with your shifting gears and operating the accel- erator and brake pedals. If they do, do not use the electrical appliance while driving.

especially metal ones such as coins or aluminum foil, into the accessory power outlet. That could cause a short circuit. Al- ways put the cap on the acces- sory power outlet when it is not in use.

. Use only electrical appliances which are designed for 12V DC. The maximum power rating of an appliance that can be connected is shown in the following list. Do not use an appliance which ex- ceeds the indicated wattage for each outlet. – The two outlets in the center console: 120W or less (When using appliances connected to two outlets simultaneously, the total power consumed by them must not exceed 120W.) – The two outlets in the rear cabin: 120W or less (When using appliances connected to two outlets simultaneously, the total power consumed by them must not exceed 120W.) Overloading the accessory power outlet can cause a short circuit. Do not use dual adapters or more than one electrical appli-

Black plate (231,1)

Interior equipment 6-11

NOTE It is possible, when using the outlet in the center console (lower compart- ment) with the lid closed, to pass the electrical appliance’s cord through a gap between the center console (lower

– CONTINUED –

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

6-12 Interior equipment

compartment) and the lid. It is also possible to pass the cord through a groove in the lid and up to the center console (upper compartment).

Coat hook

A coat hook is attached to each hand grip for the outboard second-row passenger’s seats.

Black plate (232,1)

Hang clothing directly on the coat hooks without using hangers.

CAUTION

Never hang anything on the coat hook that might obstruct the driver’s view or that could cause injury in sudden stops or in a collision. And do not hang items on the coat hook that weigh 11 lbs (5 kg) or more.

WARNING

Do not hang coat hangers or other hard or pointed objects on the coat hooks. If such items were hanging on the coat hooks during deploy- ment of the SRS curtain airbags, they could cause serious injuries by coming off the coat hooks and being thrown through the cabin or by preventing correct airbag deploy- ment. Before hanging clothing on the coat hooks, make sure there are no pointed objects in the pockets.

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

Black plate (233,1)

Interior equipment 6-13

Shopping bag hook

Floor mat

CAUTION

Do not hang items on the shopping bag hook that weigh 11 lbs (5 kg) or more.

A retaining pin is located on the driver’s side of the vehicle next to the fuel filler door release. Fit the grommet in the carpet onto the pin to prevent the carpet from moving.

CAUTION

Make sure the driver’s floor mat is placed back in its proper location and correctly secured on its retain- ing pin. Also, do not use more than one floor mat. If the floor mat slips forward and interferes with the movement of the pedals during driving, it could cause an accident.

A shopping bag hook is attached to each side of the cargo area.

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

6-14 Interior equipment

Cargo area cover (if equipped)

The cargo area cover is provided for covering the cargo area and to protect its contents from direct sunlight. This cover is detachable to make room for additional cargo.

& Using the cover

1) Holder

Insert the seatbelt webbing to the holder of the third-row seat.

To extend the cover, pull the end of the cover out of the housing, then insert its hooks into the catches as shown. To rewind it, unhook it from the catches and it will rewind automatically. You should hold on to the cover and guide it back into the cover housing while it is rewinding.

WARNING

Do not place anything on the ex- tended cover. Putting excessive weight on the extended cover can break it and an object on the cover could tumble forward in the event of a sudden stop or collision. This could cause serious injury.

Black plate (234,1)

CAUTION

. Be careful not to pinch your hand between the headrest and the cargo area cover when you re- cline the rear seat.

. Be careful not to scratch the rear gate stays while extending and rewinding the cover. Scratches on the stays could cause leakage of gas from the stays, which may result in their inability to hold the rear gate open.

NOTE When the head restraint is adjusted at the rearmost position of the seat with the seatback leaned back, the head restraint comes in contact with the cargo area cover. In this case, raise the seatback before adjusting the head restraint. If the head restraint is correctly fixed in any of the head restraint does not contact the cargo area cover even when the seatback is reclined.

the lock positions,

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

& To remove the cover 1. Rewind the cover.

& To install the cover housing

Black plate (235,1)

Interior equipment 6-15

2. Pull either sleeve on the end of the cover housing to shorten the cover’s length. 3. Take it off the retainer.

1. Remove the cover at the cover hous- ing retaining part using a flat-head screw- driver. 2. Pull either sleeve on the end of the cover housing to shorten the cover’s length.

3. Insert the projections located on the both ends of the sleeve into the recesses of the retainers.

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

Under-floor storage compart- ment

The subfloor storage compartment is located under the floor of the cargo area and can be used to store small items. To open the lid, pull the handle up.

CAUTION

. Always keep the lid of the sub- floor storage compartment closed while driving to reduce the risk of injury in the event of sudden stop or an accident.

. Do not store spray cans, contain- ers with flammable or corrosive liquids or any other dangerous items in the subfloor storage compartment.

6-16 Interior equipment

Convenient tie-down hooks

CAUTION

The convenient tie-down hooks are designed only for securing light cargo. Never try to secure cargo that exceeds the capacity of the hooks. The maximum load capacity is 44 lbs (20 kg) per hook.

The cargo area is equipped with four tie- down hooks so that cargo can be secured with a luggage net or ropes.

When using the tie-down hooks, turn them down out of the storing recesses. When not the hooks up into the in use, put storing recesses.

Black plate (236,1)

Hang the hook provided on the underside of the lid on the rear edge of the roof to keep the lid open.

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

HomeLink® Wireless Control System (if equipped)

1) HomeLink® buttons 2) 3) Hand-held transmitter*

Indicator light

* Not part of your vehicle’s remote keyless entry system but of a HomeLink®-compatible device.

The HomeLink® Wireless Control System, located on the driver’s sun visor, is a handy way to operate, from inside of your vehicle, up to three remote-controlled indoor and outdoor devices, such as garage door openers, entrance gates, door locks, home lighting, and security systems. There are three HomeLink® buttons on the sun visor, each of which you can program for operation of one

desired device. For details on the device types which can be operated by this system, consult the HomeLink website at www.homelink.com or call 1-800-355- 3515.

Note the following about this system: If your vehicle is equipped with the HomeLink® Wireless Control System, it complies with Part 15 of the Federal Communication Commission Rules in the U.S. and the RSS-210 of Industry Canada in Canada. Its operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, includ- ing interference that may cause undesired operation.

Changes and modifications to this system by anyone other than an authorized service facility could void authorization to use this equipment.

HomeLink and the HomeLink house are registered trademarks of Johnson Con- trols, Inc.

WARNING

. W h e n p r o g r a m m i n g t h e HomeLink® Wireless Control System, you may be operating a

Black plate (237,1)

Interior equipment 6-17

garage door opener or other device. Make sure that people and objects are out of the way of the garage door opener or other device to prevent potential harm or damage.

. Do not use the HomeLink® Wire- less Control System with any garage door opener that lacks the safety stop and reverse fea- ture as required by applicable safety standards. A garage door opener which cannot detect an object, signaling the door to stop and reverse, does not meet these safety standards. Using a garage door opener without these fea- tures increases risk of serious injury or death. For more infor- mation, consult the HomeLink website at www.homelink.com or call 1-800-355-3515.

CAUTION

When programming the HomeLink® Wireless Control System to operate a garage door opener or an entrance gate, unplug the device’s motor from the outlet during programming to prevent motor burnout.

– CONTINUED –

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

Black plate (238,1)

6-18 Interior equipment

NOTE . After programming your HomeLink® Wireless Control System for the de- sired devices, retain the hand-held transmitters for further programming or device testing in the event of a problem. . It is recommended that you insert a new battery in the hand-held transmit- ter of a device to ensure correct programming.

& Garage door opener pro-

gramming in the U.S.A.

NOTE When programming the HomeLink® Wireless Control System for a garage door opener, it is suggested that you park the vehicle outside the garage. 1. Unplug the motor of the garage door opener from the outlet. NOTE If any of the HomeLink® buttons are already programmed for other devices, skip step 2 because it clears the memory of all the three buttons.

2. Press and hold the two outside HomeLink® buttons until the indicator light begins to flash (after 20 seconds). Re- lease both buttons. 3. Hold the end of the garage door opener’s hand-held transmitter between 1 and 3 inches (25 and 76 mm) away from the HomeLink® buttons on the driver’s sun visor, keeping the indicator light in view.

light

4. Using both hands, simultaneously push the hand-held transmitter button and the desired HomeLink® button. DO NOT release the buttons until step 5 has been completed. 5. Hold down both buttons until the HomeLink® indicator flashes, first slowly then rapidly. When the indicator light flashes rapidly, both buttons may be released. (The rapidly flashing light indi- cates successful programming of the new frequency signal.) 6. Press and hold the programmed but- ton and check the HomeLink® indicator light. If the indicator light stays on con- tinuously, your garage door should acti- vate and the programming is completed. If the indicator light flashes rapidly for 2
seconds and then stays on continuously,

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

and easier.

1. Locate the training button on the garage door opener motor head unit. The exact location and color of the button may vary by brand of garage door opener. If it is difficult to locate the training button, refer to your garage door opener’s instruc- tion manual.

your garage door opener may be pro- tected by a rolling code feature. In this case you need to perform additional steps. Refer to “Programming rolling-code-pro- tected garage door openers in the U.S.A.” F6-19. NOTE Rolling-code-protected garage door openers are manufactured after 1996. See the instruction manual of your garage opener for confirmation. 7. Reconnect the motor of your garage door opener to the outlet. 8. Test your garage door opener by pressing the programmed HomeLink® button.

& Programming rolling-code-

protected garage door open- ers in the U.S.A.

If your garage door opener has a rolling code feature, program the HomeLink® Wireless Control System for it by following steps 1 through 5 in “Garage door opener programming in the U.S.A.” F6-18 above. Then continue with the following steps. NOTE The assistance of a second person may make the programming quicker

Black plate (239,1)

Interior equipment 6-19

1)

Training button

Inside the vehicle,

2. Press the training button on the garage door opener motor head unit (which activates the “training light” on the unit). Proceed to step 3 within 30 seconds. 3. firmly press and release the HomeLink® button that was programmed in the section above. Press and release the button a second time to complete the programming procedure. NOTE Some garage door openers may re- quire you to do the above procedure a third time to complete the program- ming. 4. The garage door opener should now recognize the HomeLink® Wireless Con-

– CONTINUED –

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

6-20 Interior equipment

trol System and your garage door opener should activate when the HomeLink® button is pressed.

& Programming for entrance

gates and garage door open- ers in Canada

1. Unplug the motor of the entrance gate or garage door opener from the outlet.

memory of all three buttons. 3. Hold the end of the entrance gate’s/ garage door opener’s hand-held transmit- ter between 1 and 3 inches (25 and 76
mm) away from the HomeLink® buttons on the driver’s sun visor, keeping the indica- tor light in view.

2. Press and hold the two outside buttons until the HomeLink® indicator light begins to flash (after 20 seconds). Release both buttons. NOTE If any of the HomeLink® buttons are already programmed for other devices, skip step 2 because it clears the

4. P r e s s a n d h o l d t h e d e s i r e d HomeLink® button. 5. Press and release (“cycle”) the hand- held transmitter button every 2 seconds until step 6 is complete. 6. When the indicator light flashes slowly and then rapidly after several seconds, release both buttons. 7. Plug the motor of the entrance gate/ garage door opener to the outlet. 8. Test your entrance gate/garage door

Black plate (240,1)

opener by pressing the programmed HomeLink® button.

& Programming other devices To program other devices such as door locks, home lighting and security systems, contact HomeLink at www.homelink.com or call 1-800-355-3515.

& Operating the HomeLink® Wireless Control System

Once programmed, the HomeLink® Wire- less Control System can be used to remote-control the devices to which its buttons are programmed. To activate a device, simply press the appropriate but- ton. The indicator light illuminates, indicat- ing that the signal is being transmitted.

& Reprogramming a single

HomeLink® button

1. Press and hold the HomeLink® button you wish to reprogram. DO NOT release the button until step 4 has been com- pleted. 2. When the HomeLink® indicator light begins to flash slowly (after 20 seconds), position the hand-held transmitter of the device for which you wish to program the button at 1 to 3 inches (25 to 76 mm) away from the HomeLink® button surface.

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

3. Press and hold the hand-held trans- mitter button. The HomeLink® indicator light will flash, first slowly and then rapidly. 4. When the indicator light begins to flash rapidly, release both buttons.

The programming for the previous device is now erased and the new device can be operated by pushing the HomeLink® button. & Erasing HomeLink® button

memory

NOTE . Performing this procedure erases the memory of all the preprogrammed buttons simultaneously. The memory of individual buttons cannot be erased. . It is recommended that upon the sale of the vehicle, the memory of all programmed HomeLink® buttons be erased for security purposes. 1. Press and hold the two outside buttons until the indicator light begins to flash (after 20 seconds). 2. Release both buttons.

Black plate (241,1)

Interior equipment 6-21

Rear view camera (if equipped)

& In case a problem occurs If you cannot activate a device using the corresponding HomeLink® button after programming, contact HomeLink at www.homelink.com or call 1-800-355- 3515 for assistance.

A rear view camera is attached to the rear gate. When the ignition switch is “ON” and the select lever is set to “R”, the rear view camera automatically displays the rear view image behind the vehicle on the navigation monitor or on the inside mirror.

WARNING

. Since the rear view camera uses a wide-angle lens, the image on the monitor is different from the actual view in terms of distance. . Since the range of the image on the monitor is limited, you should always check the rear view and

– CONTINUED –

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

Black plate (242,1)

6-22 Interior equipment

the surrounding area with your eyes and mirrors, and move backward at a slow speed. Mov- ing backward only by checking the rear view image from the camera could cause an accident. . Do not disassemble or modify the camera, switch or wiring. If smoke comes out or you smell a strange odor, stop using the rear view camera immediately. Contact your SUBARU dealer for an inspection. Continued use may result fire or electric shock.

in accident,

CAUTION

. If your vehicle is washed with a high-pressure washer, do not allow water to contact the camera directly. Entry of water in the camera lens may result in con- densation, malfunction, fire or electric shock.

. Since the camera is a precision device, do not subject it to strong impacts. Otherwise, malfunction, fire or electric shock may occur. . If mud or snow sticks to or is frozen on the camera, you must

be very careful removing it. Otherwise, damage done to the camera may cause a fire or electric shock. Pour water or lukewarm water over the camera to remove mud and ice, and wipe it with a soft, dry cloth.

. Do not put a flame close to the camera or wiring. Otherwise, da- mage or fire may occur.

. When replacing the fuse, be sure to use a fuse with the specified rating. Use of a fuse with a different rating may result in a malfunction.

. If the rear view camera is used for a long time while the engine is not operated, the battery may become completely discharged.

NOTE . Do not wipe the camera with alcohol, benzine or paint thinner. Otherwise, discoloration may occur. To remove contamination, wipe the camera with a cloth moistened with a diluted neutral detergent and then wipe it with a soft, dry cloth. . When waxing the vehicle, be careful not to apply the wax to the camera. If it comes in contact with the camera,

moisten a clean cloth with a diluted neutral detergent to remove the wax. . The camera lens has hard coating to help prevent scratches. However, when washing the vehicle or cleaning the camera lens, be careful not to scratch the camera lens. Do not use a washing brush directly on the camera lens. The monitor screen may be adversely af- fected. . Strong light shined on the camera lens may develop white light stripes around the light source. This is not a malfunction. . Under the fluorescent light, the dis- play may flicker. However, this is not a malfunction. . The image of the rear view camera may be slightly different from the actual color of the objects.

& How to use the rear view

camera

When the select lever is set to “R”, the rear view camera automatically displays the rear view image from the vehicle. When the lever is set the image before setting to “R” is displayed. 1. Set the ignition switch to “ON”. 2. Set the select lever to “R”.

to other positions,

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

NOTE . The image of the rear view camera has priority over other screen displays. . The image of the rear view camera is horizontally reversed as is the case with the vehicle rearview mirror or the side view mirror. . It may be difficult to see the image of the rearview camera in the following cases. This is not a malfunction of the camera.

– The vehicle is in a dark place (at night, in a tunnel, etc.). – The vehicle is in an extremely hot or cold place. – An object (such as raindrops, snow, dirt, etc.) that disturbs the view of the rear view camera sticks to the lens of the camera. – Strong light shined directly on the camera lens (occasionally, there are vertical lines on the screen).

Black plate (243,1)

Interior equipment 6-23

& Viewing range on the screen

Range of view

Range of view

Image from camera

The area from the rear end of the bumper can be viewed. Areas at both ends of the bumper and areas just under the bumper cannot be viewed. Also, the image from the rear view camera looks shorter than the actual distance.

CAUTION

The range that can be viewed with the rear view camera is limited. Always be sure to check with your eyes when moving backward and proceed slowly.

– CONTINUED –

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

6-24 Interior equipment

Range of view

tion cannot be seen on the screen.

CAUTION

The range that can be viewed with the rear view camera is limited. Always be sure to check with your eyes when moving backward and proceed slowly.

& Help line The help line (distance marker and vehicle width line) is a guide to help you realize the actual distance from the screen.

Image from camera

The area above the camera cannot be viewed. If there is an object that has a wide projection on its upper part such as a sign pole behind the vehicle, the projec-

Help lines displayed on the navigation monitor

Black plate (244,1)

Help lines displayed on the inside mirror 1) Vehicle width line (oblique vertical line) 2) Approx. 10 feet (3 m) from the bumper

(green horizontal line)

3) Approx. 6.5 feet (2 m) from the bumper

(green horizontal line)

4) Approx. 3 feet (1 m) from the bumper

(yellow horizontal line)

5) Approx. 1.5 feet (0.5 m) from the bumper

(red horizontal line)

When the select lever is set to position “R”, the monitor screen displays the help lines together with the rear view image.

CAUTION

. When moving backward, always check the back with your eyes without relying on the help lines. . The actual position may be dif-

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

ferent from the indication of the help lines.

. Differences may occur due to number of passengers or loaded cargo.

. When the vehicle is on a slope or when the vehicle is inclined against the road, the indication is different from the actual posi- tion.

! Difference between screen and ac-

tual road

The distance markers show the distance for a level road when the vehicle is not loaded. It may be different from the actual distance depending on the loading condi- tions or road conditions.

Black plate (245,1)

Interior equipment 6-25

! When there is an upward slope at the

back

! When there is a downward slope at

the back

1)

3 feet (1 m)

1)

3 feet (1 m)

The distance on the screen looks farther than the actual distance.

The distance on the screen looks nearer than the actual distance. NOTE When cargo is loaded, the rear view distance on the screen looks farther than the actual distance as in an upward slope.

– CONTINUED –

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

6-26 Interior equipment

! Feature of distance marker

1) 2) 3)

3 feet (1 m) line 6.5 feet (2 m) line 10 feet (3 m) line

The distance marker shows the distance on the road. If there is a car or other object close behind, distance cannot be correctly displayed.

Black plate (246,1)

北米Model "A3160BE-C" EDITED: 2010/ 11/ 19

Fuel ...................................................................... Fuel requirements ............................................... Fuel filler lid and cap........................................... State emission testing (U.S. only)...................... Preparing to drive ............................................... Starting the engine.............................................. Stopping the engine............................................ Remote engine start system (dealer option) ..... Starting your vehicle ........................................... Remote start safety features ................................ Entering the vehicle while it is running via remote start.................................................................. Entering the vehicle following remote engine start shutdown..........................................................

7-2
7-2
7-3
7-5
7-7
7-7
7-8
7-8
7-9
7-9

7-9

7-9

Pre-heating or pre-cooling the interior of the

vehicle ............................................................. 7-10
Service mode ..................................................... 7-10
Remote engine start transmitter programming

System maintenance ..........................................

and programmable feature option ..................... 7-10
7-11
Automatic transmission..................................... 7-12
Select lever ........................................................ 7-13
Shift lock function .............................................. 7-14
Selection of manual mode .................................. 7-16
Driving tips ........................................................ 7-17
SPORT mode ..................................................... 7-18

Black plate (13,1)

Starting and operating

Power steering................................................... Braking ............................................................... Braking tips....................................................... Brake system .................................................... Disc brake pad wear warning indicators ............. ABS (Anti-lock Brake System).......................... ABS system self-check ...................................... ABS warning light..............................................

Electronic Brake Force Distribution (EBD)

system ............................................................. Steps to take if EBD system malfunctions .......... Vehicle Dynamics Control system.................... Vehicle Dynamics Control system monitor.......... Traction Control system OFF switch................... Tire pressure monitoring system (TPMS) ........ Parking your vehicle ......................................... Parking brake .................................................... Parking tips ....................................................... Cruise control .................................................... To set cruise control .......................................... To temporarily cancel the cruise control ............. To turn off the cruise control.............................. To change the cruising speed ............................ Cruise control indicator light.............................. Cruise control set indicator light ........................

7-18
7-19
7-19
7-19
7-20
7-20
7-21
7-21

7-22
7-22
7-23
7-25
7-27
7-28
7-29
7-29
7-30