2010 Subaru Impreza Owners Manual

” or “

the way to the right. 3. Set the fan speed control dial to the highest speed. When the “ ” position is selected, the air conditioner compressor automati- cally operates regardless of the position of the air conditioner button to defog the windshield quickly. However, the air conditioner indicator light does not illuminate at this time. NOTE Warm air also comes out from the right and left air outlets. To stop warm air flow from these outlets, turn the corre- sponding thumb-wheel down.

To direct warm air to the windshield and front door windows: 1. Set the air flow control dial to the “ position. 2. Turn the temperature control dial all

”

Climate control 4-5

! Heating and defrosting

”

To direct warm air toward the floor and the windshield: 1. Set the air flow control dial to the “ position. 2. Set the temperature control dial to the most comfortable level. 3. Set the fan speed control dial to the desired speed. When the “ ” position is selected, the air conditioner compressor automati- cally operates regardless of the position of the air conditioner button to defog the windshield quickly. However, the air conditioner indicator light does not illuminate at this time.

” or “

– CONTINUED –

4-6 Climate control

NOTE Warm air also comes out from the right and left air outlets. To stop warm air flow from these outlets, turn the corre- sponding thumb-wheel down.

NOTE Warm air also comes out from the right and left air outlets. To stop warm air flow from these outlets, turn the corre- sponding thumb-wheel down.

! Heating

! Bi-level heating

desired speed.

Setting the temperature control dial fully turned to the red area or blue area decreases the temperature difference between the air from the instrument panel outlets and the air from the foot outlets. ! Ventilation

To direct warm air toward the floor: 1. Set the air inlet selection button to the OFF position. 2. Set the air flow control dial to the “ position. 3. Set the temperature control dial to the most comfortable level. 4. Set the fan speed control dial to the desired speed.

”

This setting allows you to direct air of different temperatures from the instrument panel and foot outlets. The air from the foot outlets is slightly warmer than from the instrument panel outlets. 1. Set the air inlet selection button to the OFF position. 2. Set the air flow control dial to the “ position. 3. Set the temperature control dial to the desired temperature level. 4. Set the fan speed control dial to the

”

To force outside air through the instrument panel outlets: 1. Set the air inlet selection button to the OFF position. 2. Set the air flow control dial to the “ position. 3. Set the temperature control dial all the way left. 4. Set the fan speed control dial to the desired speed.

”

Climate control 4-7

red side. 3. Set the fan speed control dial at the highest speed.

The air conditioner compressor automati- cally operates when the air flow control dial set ” position to provide better defogging performance.

in the “

” or “

When driving on a dusty road, set the air inlet selection button to the “ON” position.

WARNING

Continued operation with the air inlet selection button in the ON position may fog up the windows. Switch to the OFF position as soon as the outside dusty condition clears.

& Air conditioner operation ! Cooling or dehumidifying

through the instrument panel outlets: 1. Set the air inlet selection button to the OFF position. 2. Set the air flow control dial to the “ position. 3. Set the air conditioner button to the “ON” position. 4. Set the temperature control dial to the blue side. 5. Set the fan speed control dial at the highest speed.

”

! Defrosting or defogging

1) ON position

For cooling and dehumidification of the passenger compartment, performing the following steps will allow air to flow

To direct warm air to the windshield and front door windows: 1. Set the air flow control dial to the “ position. 2. Set the temperature control dial to the

”

4-8 Climate control

Automatic climate control system (if equipped)

sor automatically and the “A/C” indi- cator light on the air conditioner button illuminates.

Although this climate control system can be used as a full-automatic climate control system, it can also, if desired, be used as a semi-automatic climate control system. When it is used as a full-automatic climate control system, the outlet air temperature, fan speed, air flow distribution, air inlet control, and air conditioner compressor operation are all automatically controlled to maintain a constant, comfortable tem- perature inside the vehicle. NOTE . Operate the automatic climate con- trol system when the engine is running. . When the engine coolant is cold, the blower does not run. . In the “AUTO” mode, when the air temperature in the passenger compart- ment is sufficiently cool, the air condi- tioner compressor does not operate. For efficient defogging or dehumidify- ing in cold weather, press the “A/C” button to operate the air conditioner compressor. . Even when cooling is not necessary, setting the temperature much lower than the current outlet air temperature turns on the air conditioner compres-

& Control panel

Temperature control dial Fan speed control dial

1) 2) 3) Air flow control dial 4) Control switch of the defogger and deicer system (Refer to “Defogger and deicer” F3-45.)

5) Air inlet selection button 6) Air conditioner button

& To use as full-automatic cli-

mate control system

Place the temperature control dial in the position for your desired temperature, then set the other dials and buttons as de- scribed in the following. The system’s functions will then switch to AUTO mode and be controlled automatically. . Air flow control dial: AUTO position . Fan speed control dial: AUTO position

& To use as semi-automatic

climate control system

Each function can be individually set to AUTO mode independently of the others. Any function set to AUTO mode is con- trolled automatically. Any function not set to AUTO mode can be manually adjusted as desired. The temperature can be set within a range of 65 to 858F (20 to 308C).

& Fan speed control dial

Climate control 4-9

the system gives maximum cooling per- formance. If the dial is turned fully clock- wise, the system gives maximum heating performance.

& Air flow control dial

NOTE With the fan speed control dial in the AUTO position and the air flow control dial in the “ ”, or “ ” position, the fan does not operate during engine warm-up until the engine coolant tem- perature exceeds approximately 1228F (508C).

”, “

& Temperature control dial

The fan operates only with the ignition switch in the ON position. The fan speed control dial is used to select the AUTO (automatic control) mode or to select the desired fan speed. The dial’s positions and their functions are as follows. OFF: The fan does not operate. AUTO: The fan speed is adjusted auto- matically in accordance with the air temperature inside and outside the pas- senger compartment, the intensity of sun- light, and other factors. SUBARU recom- mends using the AUTO position. Other positions: The fan speed can be adjusted in 7 steps.

This dial is used to set the desired interior temperature. With the dial set to your desired temperature, the system automa- tically adjusts the temperature of air supplied from the outlets such that the desired temperature is achieved and maintained. If the dial is turned fully counterclockwise,

This dial has the following six positions. The outlets from which air is supplied in each position are as follows. AUTO: The air flow control is adjusted automatically in accordance with the air temperature inside and outside the pas- senger compartment, the intensity of sun- light, and other factors. SUBARU recom- mends using the AUTO position.

: Instrument panel outlets

Instrument panel outlets and foot

outlets

– CONTINUED –

4-10 Climate control

: Foot outlets and windshield defroster outlets (relatively little air from windshield defroster outlets)

: Windshield defroster outlets and foot

outlets

: Windshield defroster outlets

NOTE When the dial is placed in the “ ” or “ ” position, the air inlet selection is automatically set to “outside air” mode.

& Air inlet selection button

ON position (Recirculation): Interior air is recirculated inside the vehicle. Push the air inlet selection button to the ON position for fast cooling with the air conditioner or

when driving on a dusty road. The indicator light will illuminate. OFF position (Outside Air): Outside air is drawn into the passenger compartment. Push the air inlet selection button to the OFF position when the interior has cooled to a comfortable temperature and the road is no longer dusty. The indicator light will turn off. AUTO: Turn the fan speed control dial and air flow control dial to the AUTO position. The air is then adjusted automatically in accordance with the air temperature inside and outside the pas- senger compartment, the intensity of sun- light, and other factors. Pressing the air inlet selection button cancels the “AUTO” mode. To return to “AUTO” mode, turn the fan speed control dial or air flow control dial to a position other than the AUTO position. Then turn to “AUTO” mode. SUBARU recommends using the AUTO position.

inlet control

WARNING

Continued operation in the ON posi- tion may fog up the windows. Switch to the OFF position as soon as the outside dusty condition clears.

& Air conditioner button

The button positions and their functions are as follows. ON: The air conditioner operates while the fan is running. Push the button to select this position. The indicator light will illuminate. OFF: The air conditioner does not oper- ate. Push the button again to select position. The indicator light will turn off. AUTO: Turn the fan speed control dial and air flow control dial to the AUTO position. The air conditioner compressor operation is then adjusted automatically in accor- dance with the air temperature inside and outside the passenger compartment, the intensity of sunlight, and other factors.

this

& Temperature sensors

Pressing the button cancels the “AUTO” mode. To return to “AUTO” mode, turn the fan speed control dial or air flow control dial to a position other than the AUTO position. Then turn to “AUTO” mode. SUBARU recommends using the AUTO position. NOTE The air conditioner’s compressor does not operate with an outside tempera- ture of 328F (08C) or lower.

Climate control 4-11

properly and become damaged, the sys- tem may not be able to control the interior temperature correctly. To avoid damaging the sensors, observe the following pre- cautions. – Do not subject the sensors to impact. – Keep water away from the sensors. – Do not cover the sensors. The sensors are located as follows. – Solar sensor: beside the windshield defroster grille. – Interior air temperature sensor: near the ignition switch. – Outside temperature sensor: behind the front grille.

Interior air temperature sensor

1) 2) Solar sensor

The automatic climate control system employs several sensors. These sensors are delicate. treated

they are not

If

4-12 Climate control

Operating tips for heater and air conditioner & Cleaning ventilation grille

Always keep the front ventilation inlet grille free of snow, leaves, or other obstructions to ensure efficient heating and defrosting. Since the condenser is located in front of the radiator, this area should be kept clean because cooling performance is impaired by any accumulation of insects and leaves on the condenser.

& Efficient cooling after parking

in direct sunlight

After parking in direct sunlight, drive with the windows open for a few minutes to allow outside air to circulate into the

system.

& Air conditioner compressor

shut-off when engine is heavily loaded

To improve acceleration and gas mileage, the air conditioner compressor is designed to temporarily shut off during air condi- tioner operation whenever the accelerator is fully depressed such as during rapid acceleration or when driving on a steep upgrade.

& Refrigerant for your climate

control system

Your air conditioner uses ozone friendly refrigerant HFC134a. Therefore, the meth- od of adding, changing or checking the refrigerant is different from the method for CFC12 (freon). Consult your SUBARU dealer for service. Repairs needed as a result of using the wrong refrigerant are not covered under warranty.

heated interior. This results in quicker cooling by the air conditioner. Keep the windows closed during the operation of the air conditioner for maximum cooling efficiency.

& Lubrication oil circulation in

the refrigerant circuit

Operate the air conditioner compressor at a low engine speed (at idle or low driving speeds) a few minutes each month during the off-season to circulate its oil.

& Checking air conditioning

system before summer sea- son

Check the air conditioner unit for refriger- ant leaks, hose conditions, and proper operation each spring. Have the air con- ditioning system checked by your SUBARU dealer.

& Cooling and dehumidifying in

high humidity and low tem- perature weather conditions Under certain weather conditions (high relative humidity, low temperatures, etc.) a small amount of water vapor emission from the air outlets may be noticed. This condition is normal and does not indicate any problem with the air conditioning

Air filtration system

mance if not properly maintained.

Climate control 4-13

Replace the filter element according to the replacement schedule as follows. This schedule should be followed to maintain the filter’s dust collection ability. Under extremely dusty conditions, the filter should be replaced more frequently. It is recommended that you have your filter checked or replaced by your SUBARU dealer. For replacement, use only a genuine SUBARU air filter kit.

Replacement schedule:

Every 12 months or 7,500 miles (12,000
km) whichever comes first

CAUTION

Contact your SUBARU dealer if the following occurs, even if it is not yet time to change the filter: – Reduction of the air flow through

the vents.

– Windshield gets easily fogged or

misted.

NOTE The filter can influence the air condi- tioning, heating and defroster perfor-

& Replacing an air filter 1. Remove the glove box. (1) Open the glove box.

(3) Pull out the glove box.

(2) Remove the damper shaft from the glove box.

2. Remove the air filter.

– CONTINUED –

4-14 Climate control

3. Replace the air filter element with a new one.

CAUTION

The arrow mark on the filter must point UP.

4. Reinstall the glove box, and connect the damper shaft. 5. Close the glove box. 6. LABEL installation

(1) Attach the service label driver’s side door pillar.

to the

1) Caution label

(2) Attach the caution label next to the air filter as shown in the illustration.

Antenna system .................................................. Roof antenna ...................................................... FM reception ....................................................... XMTM satellite radio reception (if equipped)...... Installation of accessories.................................. Audio set ............................................................. Type A audio set (if equipped) ............................. Type B audio set (if equipped) ............................. Power and sound controls ................................. Power switch and volume control ........................ Sound control ..................................................... Adjustable level of each mode .............................

5-2
5-2
5-2
5-2
5-4
5-4
5-5
5-6
5-7
5-7
5-7
5-9
FM/AM radio operation ...................................... 5-10
FM/AM selection................................................. 5-10
Tuning ............................................................... 5-10
Displaying radio PS (Program Service Name) and

RT (Radio Text) ................................................ 5-12
Station preset .................................................... 5-12
Satellite radio operation (if equipped) .............. 5-13
XMTM satellite radio ............................................ 5-13
Sirius satellite radio ........................................... 5-13
Satellite radio reception...................................... 5-13
Displaying satellite radio ID of tuner ................... 5-13
Band selection ................................................... 5-14

Audio

Channel and category selection ......................... Channel preset .................................................. Display selection ............................................... CD player operation .......................................... How to insert a CD (type A)................................ How to insert a CD(s) (type B)............................ How to play back a CD ...................................... To select a track from its beginning.................... Fast-forwarding and fast-reversing ..................... Repeating .......................................................... Random playback .............................................. Scan ................................................................. Display selection ............................................... Folder selection ................................................. How to eject a CD from the player (type A) ......... How to eject CDs from the player (type B) .......... When the following messages are displayed....... AUX unit operation (if equipped)...................... AUX jack ........................................................... Audio control buttons (if equipped) ................. MODE button.....................................................

Precautions to observe when handling a

compact disc...................................................

5-14
5-15
5-16
5-16
5-17
5-17
5-18
5-19
5-20
5-20
5-21
5-22
5-22
5-23
5-23
5-23
5-24
5-25
5-25
5-26
5-26

5-28

5-2 Audio

Antenna system & Roof antenna

CAUTION

. Be sure to lower the antenna rod before entering garages, parking towers and other locations with low ceilings.

. Remove the antenna rod before washing your car at a car wash. If the antenna rod is left attached, it may scratch the roof.

. When reinstalling the removed antenna rod, be sure to fully tighten it.

XMTM satellite radio reception (if equipped) XMTM is a continental U.S. based satellite radio service, which includes music, news, sports, talk and children’s programming. XMTM provides digital quality audio and text information, including song title and artist name. A service fee is required to receive the XMTM service. For more information, contact XMTM at www.xmradio.com or call 1-800-XM- RADIO (1-800-967-2346) for U.S., www.xmradio.ca or 1-877-GET-XMSR (1- 877-438-9677) for Canada. The XMTM satellite radio receiver that is fitted to your vehicle receives the neces- sary signals from two specially designated satellites that are in a geostationary orbit over the equator. One satellite covers the east coast and the other covers the west coast. Both of their signals north. These signals are then relayed throughout the USA by a network of ground repeater stations. The satellite radio signals are transmitted as “line of sight” signals. Line of sight signals can be blocked by objects such as buildings, but the network of repeater stations allows signal coverage within urban areas such as cities.

them direct

1) Unscrew 2) Remove

The roof antenna is installed in the center at the rear part of the roof. It is possible to remove the antenna rod by unscrewing it from its base.

& FM reception Although FM is normally static free, reception can be affected by the surround- ing area, atmospheric conditions, station strength and transmitter distance. Build- ings or other obstructions may cause momentary static, flutter or station inter- ference. reception continues to be unsatisfactory, switch to a stronger station.

If

You may experience problems in receiving XMTM satellite radio signals in the follow- ing situations. . If you are driving northward in a coastal area the XMTM satellite You will notice that radio antenna is fixed to the upper right hand corner of your windshield.

Audio 5-3

The signal comes from the south and may not be able to reach the antenna in some circumstances when you are driving north.

. If you are driving in a tunnel or a covered parking area . If you are driving beneath the top level of a multi-level freeway . If you drive under a bridge . If you are driving next to a tall vehicle (such as a truck or a bus) that blocks the signal . If you are driving in a valley where the surrounding hills or peaks block the signal from the south . If you are driving on a mountain road where the southern direction is blocked by mountains

. If you are driving in an area with tall trees that block the signal (33 ft (10 m) or more), for example on a road that goes through a dense forest . The signal can become weak in some areas that are not covered by the repeater station network.

Please note that these may be other unforeseen circumstances when there are problems with the reception of XMTM satellite radio signals.

5-4 Audio

Installation of accessories

Always consult your SUBARU dealer before installing a citizen band radio or other transmitting device in your vehicle. Such devices may cause the electronic control system to malfunction if they are incorrectly installed or they are not suited for the vehicle.

if

Audio set

Your SUBARU may be equipped with one of the following audio sets. Refer to the pages indicated in this section for operat- ing details. NOTE If a cell phone is placed near the audio set, it may cause the audio set to emit noise when the phone receives calls. This noise does not indicate an audio set malfunction. Note that a cell phone should be placed as far as possible from the audio set.

& Type A audio set (if equipped)

Audio 5-5

refer

The audio set will operate only when the ignition switch is in the “Acc” or “ON” position. . Power and sound controls: page 5-7
. Radio operation: refer to page 5-10
. Satellite radio operation (if equipped): refer to page 5-13
. CD (compact disc) player operation: refer to page 5-16
. AUX unit operation: refer to page 5-25

to

– CONTINUED –

5-6 Audio

& Type B audio set (if equipped)

refer

The audio set will operate only when the ignition switch is in the “Acc” or “ON” position. . Power and sound controls: page 5-7
. Radio operation: refer to page 5-10
. Satellite radio operation (if equipped): refer to page 5-13
. CD (compact disc) player operation: refer to page 5-16
. AUX unit operation: refer to page 5-25

to

Power and sound controls & Power switch and volume

control

& Sound control ! Tone and balance control

Audio 5-7

! Other sound setting controls

The dial is used for both power (ON/OFF) and volume control. The radio is turned ON and OFF by pushing the dial, and the volume is controlled by turning the dial.

Each brief press of the sound control dial changes the control modes in the follow- ing sequence.

Each brief press of the “MENU” button changes the control modes in the follow- ing sequence. Type A audio:

Choose the desired level for each mode by turning the sound control dial. The control function returns to the tune/ track/channel control mode after approxi- mately 5 seconds.

Type B audio:

Choose the desired settings for each mode by turning the sound control dial. The control function returns to the tune/

– CONTINUED –

speakers can be heard at ear level (built in SRS FOCUS effect). 2) Ultra rich bass sound can be ob- tained from standard door mount speakers (built in SRS TruBass effect). 3) Surround sound can be obtained from 2-channel stereo sources such as CD, MP3 and FM (built in SRS Circle Surround II effect). 4) SRS CS Auto can position the center channel image in the center of the vehicle’s windshield. This elimi- nates the need for a center speaker (built in SRS Circle Surround II phan- tom center and SRS FOCUS effects).

CS Auto, TruBass, FOCUS, Circle Sur- round-II, SRS and “ ” symbol are trademarks of SRS Labs, Inc. CS Auto technology is incorporated under license from SRS Labs, inc.

5-8 Audio

in order

track/channel control mode after approxi- mately 5 seconds. ! SPEED VOLUME setting SPEED VOLUME CONTROL is a function that automatically adjusts the volume according to the vehicle speed. As the vehicle speed increases, the audio vo- lume automatically increases to match the vehicle speed, to create a pleasant listening environment even as the driving noise increases. The amount of this automatic volume change can be set in the range from OFF to 2. The initial setting is OFF. ! BEEP setting A beep sound (operation sound) that occurs when the audio system is operated can be set ON/OFF. The initial setting is ON. ! SRS CS Auto setting (type B audio) SRS CS Auto can be set ON/OFF. When this setting is ON, “ ” is displayed on the screen. NOTE SRS CS Auto creates a 5.1ch equiva- lent surround field using 10 speakers that are installed in the vehicle. SRS CS Auto features: 1) Sound originating from door mount

& Adjustable level of each mode

Mode

Volume

Volume control AUX volume control*

Tone and balance Bass control

Midrange control Treble control Balance Fader SPEED VOLUME BEEP CS Auto (Type B audio)

Other settings

Range of levels (displayed) 0 to 40
0 to 40
−8 to +8
−8 to +8
−8 to +8
L9 to R9
R9 to F9
OFF to 2
OFF to ON OFF to ON

*: Only when an AUX audio product is connected.

Audio 5-9

Initial setting

Turn counterclockwise

Turn clockwise

15
15
OFF ON OFF

For more volume For more volume For more bass sound For more midrange sound For more treble sound Left channel attenuated Rear attenuated

For less volume For less volume For less bass sound For less midrange sound For less treble sound Right channel attenuated Front attenuated For less auto volume change For more auto volume change OFF OFF

ON ON

5-10 Audio

FM/AM radio operation & FM/AM selection

& Tuning ! Manual tuning

! Seek tuning (SEEK)

Push the “FM AM” button when the radio is off to turn on the radio. Push the “FM AM” button when the radio is on to select FM1, FM2, FM3 or AM reception. Each brief press of the “FM AM” button changes the radio in the following se- quence starting from the last radio band with you selected.

Turn the “TUNE” dial clockwise to in- crease the tuning frequency and turn the “TUNE” dial counterclockwise to decrease it. Each time the dial is turned, the frequency interval can be changed between 10 kHz in the AM mode and 0.2 MHz in the FM mode. ! Stereo indicator The stereo indicator “ST” will illuminate when an FM stereo broadcast is received.

” or “

If you press the “ ” side of the “SEEK” button briefly, the radio will auto- matically search for a receivable station and stop at finds. This function may not be available, however, when radio signals are weak. In such a situation, perform manual tuning to select the desired station.

the first one it

! Scan tuning (SCAN)

! PTY (Program type) group tuning

(only FM reception)

! PTY (Program type) group selection

Audio 5-11

Press the “PTY/CAT” button to change to the PTY selection mode. At this time, the PTY group that you are currently listening to will be displayed for 10 seconds. In the PTY selection mode, “PTY” is displayed on the screen.

If you press the “SCAN” button, the radio will switch to the scan mode. In this mode, the radio scans through the radio band until a station is found. The radio will stop at the station for 5 seconds while display- ing the frequency, after which scanning will continue until the entire band has been scanned. Press the “SCAN” button again to cancel the SCAN mode and to stop at any displayed channel. Automatic tuning may not function prop- erly if the station reception is weakened by distance from the station or proximity to tall buildings and hills.

” or “

In the PTY selection mode, press the “PTY” button “ ” to change the PTY group by one step at a time. Pressing “ by one step. Pressing “ PTY group down by one step. This operation only changes the display. It does not change the station that is currently being received.

” changes the PTY group up ” changes the

– CONTINUED –

5-12 Audio

! Seek in PTY (Program type) group

& Displaying radio PS (Pro-

gram Service Name) and RT (Radio Text)

” or “

& Station preset ! How to preset stations 1. Press the “FM AM” button to select FM1, FM2, FM3 or AM reception. 2. Press the “ the “SEEK” button or tune the radio manually until the desired station frequency is displayed. 3. Press one of the preset buttons for more than 1.5 seconds to store the frequency. If the button is pressed for less than 1.5 seconds, the preceding selection will remain in memory.

” side of

In the PTY selection mode, when the desired PTY group has been selected, pressing the “SEEK” button “ ” seeks within that PTY group. Pressing “ seeks down. The control function returns to the normal mode after approximately 10 seconds.

” seeks up. Pressing “

” or “

”

If the PS (Program Service Name) and/or RT (Radio Text) are available, pressing the “TEXT” button changes the display among PS, RT and frequency. The initial setting is “PS”. NOTE . The maximum number of characters that can be displayed for PS is 8. . The maximum number of characters that can be displayed for RT is 64. . If RT is 13 characters or longer, press and hold the “TEXT” button for 0.5 second or longer in order to change the page.

NOTE . If the connection between the radio and battery is broken for any reason such as vehicle maintenance or radio removal, all stations stored in the this preset buttons are cleared. occurs, the preset buttons. . If a cell phone is placed near the radio, it may cause the radio to emit noise when it receives calls. This noise does not indicate a radio malfunction.

If is necessary to reset

it

! Selecting preset stations

Presetting a station with a preset button allows you to select that station in a single operation. Up to six AM, FM1, FM2 and FM3 stations each may be preset.

Satellite radio operation (if equipped)

To receive satellite radio, it is necessary to install the SUBARU genuine satellite receiver (optional equipment) and to enter into a contract. For details, please contact your SUBARU dealer. & XMTM satellite radio XMTM is a continental U.S. based satellite radio service, which includes music, news, sports, talk and children’s programming. XMTM provides digital quality audio and text information, including song title and artist name. A service fee is required to receive the XMTM service. For more information, contact XMTM at www.xmradio.com or call 1-800-XM- RADIO (1-800-967-2346) for U.S., www.xmradio.ca or 1-877-GET-XMSR (1- 877-438-9677) for Canada.

& Sirius satellite radio Sirius satellite radio is a recent innovation that allows the listener to experience digital sound quality and to have a greater variety of channels. Use of satellite radio (Sirius) requires a tuner, antenna and a service contract. For details, please contact your SUBARU

Audio 5-13

dealer or visit Sirius Satellite Radio at www.sirius.com or call 1-888-539-SIRIUS (7474) for more information. Sirius, the Sirius dog logo, channel names and logos are trademarks of SIRIUS Satellite Radio Inc.

& Satellite radio reception Satellite radio signals are best received in areas with a clear view of the open sky. In areas where there are tall buildings, trees, tunnels or other structures that may obstruct the signal of the satellites, there may be signal interruptions. Other circum- stances that may result loss include driving near a wall, steep cliff, hill or driving on the lower level of a multi- tiered road or inside of a parking garage. To help reduce this condition, satellite radio providers have installed ground- based repeaters in heavily populated areas. However, you may still experience reception problems in some areas.

in signal

& Displaying satellite radio ID

of tuner

When you activate satellite radio, you should have your satellite radio tuner ID ready because each tuner is identified by its unique satellite radio tuner ID. The satellite radio ID will be needed when

– CONTINUED –

5-14 Audio

you activate satellite radio and receive satellite radio customer support. The satellite radio ID can be found on the audio display by tuning the channel to “0”. Turn the “CH” dial to select the satellite radio channel. NOTE For Sirius, change the display to an indication mode other than the channel number after performing the above operation.

& Band selection

Push the “SAT” button when the radio is off to turn on the radio. Push the “SAT” button when the radio is on to select SAT1, SAT2 or SAT3 recep-

tion.

! Skip channel selection

& Channel and category selec-

tion

! Channel selection

“

” or

When in the SAT mode, press the “SEEK” button “ ” continuously to change to the channel selection mode. Pressing the “SEEK” button “ ” changes the channel up by 10 steps each time. Pressing “ ” changes the channel down by 10 steps each time.

Turn the “CH” dial clockwise to select the next channel and turn the “CH” dial counterclockwise to select the previous channel.

! Category selection

! Channel scan

”

“

” or

When in the SAT mode, press the “CAT” button “ to change to the category search mode. When in the category search mode, pressing the “CAT” button “ ” changes the category up by one step. Pressing “ ” changes the category down by one step. When a category is selected, turning the “CH” dial selects channels only within the selected category. The control function returns to the normal mode after approximately 10 seconds.

the selected category,

Press the “SCAN” button to change the radio to the SCAN mode. In this mode, under the radio scans through the channel until a station is found. The radio will stop at the station for 5 seconds while displaying the channel number, after which scanning will continue until the entire channel has been scanned from the low end to the high end. Press the “SCAN” button again to cancel the SCAN mode and to stop on any displayed channel.

Audio 5-15

& Channel preset ! How to preset channels 1. Press the “SAT” button to select SAT1, SAT2 and SAT3 reception. 2. Select the desired channel. 3. Press one of the preset buttons for more than 1.5 seconds to store the channel. If the button is pressed for less than 1.5 seconds, the preceding selection will remain in memory.

NOTE If the connection between the radio and battery is broken for any reason such as vehicle maintenance or radio re- moval, all channels stored in the preset buttons are cleared. If this occurs, it is necessary to reset the preset buttons.

– CONTINUED –

5-16 Audio

! Selecting preset channels

& Display selection

CD player operation

Presetting a channel with a preset button allows you to select in a single operation. Up to six SAT1, SAT2
and SAT3 channels each may be preset.

that channel

Press the “TEXT” button while receiving the satellite radio to change the display as follows.

NOTE . Make sure to always insert a disc with the label side up. If a disc is inserted with the label side down, the player displays “CHECK DISC”. Refer to “When the following messages are displayed” F5-24. . If a disc is inserted during a radio broadcast, the disc will interrupt the broadcast. . After the last song finishes, the disc will automatically return to track 1 (the first track on the disc) and will auto- matically play back. . The player is designed to be able to play music CD-Rs and music CD-RWs, but it may not be able to play certain ones. . CDs (i.e., 8 cm/3 inch CDs) are not supported, and if inserted, they will be immediately ejected. . A file (track) that is protected by copyright of WMA cannot be played, and the player will skip to the next file (track).

insert

indicator

If no indicator blinks, it means that there is no idle position in the magazine. illumi- 2. When the “LOAD” nates, the disc. Once you have inserted the disc, the “LOAD” indicator will turn off. The disc will then be automatically drawn in, and the player will begin to play back the first track of the disc. . To insert more discs in succession, repeat Steps 1 and 2. The magazine will be loaded with discs in the ascending order of position number. If you do not insert any disc in 15 seconds after you have pressed the “LOAD” button, the player will begin to play back the first track of the last disc you have inserted. . The disc indicator steadily lights up if a disc is already inserted in the correspond- ing position of the magazine. . While the player is in the loading mode, if you press “FM/AM”, “SAT” or “AUX” button, the player will enter the standby mode. Press the “CD” button to start playback.

& How to insert a CD (type A) Hold a disc with a finger in the center hole while gripping the edge of the disc, then insert it in to the slot (with the label side up) and the player will automatically pull the disc into position. NOTE DO NOT INSERT TWO DISCS INTO THE DISC INSERTION SLOT AT THE SAME TIME.

& How to insert a CD(s) (type B)

1. Briefly press the “LOAD” button. If the magazine in the player has an idle position where you can insert a disc, the disc number indicator associated with the idle position will blink.

Audio 5-17

! Inserting a disc in a desired posi-

tion

1. Briefly press the “LOAD” button. If the magazine in the player has an idle position where you can insert a disc, the disc number indicator associated with the idle position will blink. The positions in the magazine the indica- tor of which steadily lights up are already loaded with discs.

– CONTINUED –

5-18 Audio

Press the “CD” button to start playback. ! Loading all the magazine (full disc

loading mode)

insert

indicator

2. Press the disc select button at the position where you want to insert a disc. 3. When the “LOAD” illumi- nates, the disc. Once you have inserted the disc, the “LOAD” indicator will turn off. The disc will then be automatically drawn in, and the player will begin to play the first track on the disc. . If you wish to insert another disc, repeat the procedure beginning with step 1. If you do not insert any disc in 15 seconds after you have pressed the “LOAD” button, the player will begin to play back the first track of the last disc you have inserted. . While the player is in the loading mode, if you press “FM/AM”, “SAT” or “AUX” button, the player will enter standby mode.

If you continue to press the “LOAD” 1. the button for more than 1.5 seconds, player will produce beep sound and will enter the full disc loading mode. 2. When the disc number indicator flashes and “ALL LOAD” indicator illumi- nates, insert a disc within 15 seconds. If a disc is successfully loaded during this period, the disc number indicator will stop blinking and will steadily light. 3. When the loading of a disc is com- plete, the next disc number indicator will blink. Then repeat Step 2. 4. When the magazine is filled with discs by repeating Steps 2 and 3, the player will

start playback of the discs, beginning with the one inserted first.

If you fail to insert any disc during each 15
seconds interval, the full disc loading mode will be canceled, and the player will start playback of the disc inserted first. & How to play back a CD ! When there is no CD inserted Properly insert a CD. Refer to “How to insert a CD (type A)” F5-17/“How to insert a CD(s) (type B)” F5-17. When a CD is loaded, the player will start playback of the CD, beginning with the first track. ! When CD is in the player (type A)

When the “CD” button is pressed,

the

player will start playback. ! When there are CDs loaded (type B)

& To select a track from its

beginning

! Backward direction

! Forward direction

Audio 5-19

Press a desired one of the disc select buttons the disc number indicator of which steadily lights up. The player will then start playback of the selected CD, beginning with the first track. If a disc that the player cannot read has been loaded, the player will display the message “CHECK DISC”.

Turn the “TRACK” dial clockwise to skip to the beginning of the next track/file (track). Each time the dial is turned, the indicated track/file (track) number will increase. NOTE In an MP3 or WMA folder, skipping past the last track/file (track) will take you back to the first track/file (track) in the folder.

Turn the “TRACK” dial counterclockwise the current to skip to the beginning of track/file (track). Each time the dial is turned, the indicated track/file (track) number will decrease. NOTE In an MP3 or WMA folder, skipping past the first track/file (track) will take you to the last track/file (track) in the folder.

– CONTINUED –

5-20 Audio

& Fast-forwarding and fast-re-

versing

! Fast-reversing

& Repeating

! Fast-forwarding

Press the “ ” side of the “SEEK” button continuously to fast-forward the disc/ folder. Release the button to stop fast-forwarding. NOTE If you fast-forward to the end of the last track/file (track), fast-forwarding will stop and the player will start playback beginning with the first track/file (track).

Press the “ ” side of the “SEEK” button continuously to fast-reverse the disc/ folder. Release the button to stop fast-reversing. NOTE If you fast-reverse to the beginning of the first track/file (track), fast-reversing will stop and the player will start play- back.

To repeat a track/file (track), briefly press the “RPT” button while the track/file (track) is playing. Each time you briefly press the button, the mode changes in the following se- quences. Type A audio:

Type B audio:

NOTE . The “RPT” indication refers to the repeat playback of a single track. It repeats the track that is playing. . The “F-RPT” indication refers to the repeat playback of a folder. It repeats the all of the tracks in the folder. It is possible to select the function when the MP3/WMA format track is playing. . The “D-RPT” indication refers to the repeat playback of a disc. It repeats the tracks on the CD. It is only possible to select this function for type B audio. To cancel the track/file (track) repeat-play mode, briefly press the “RPT” button twice. The “RPT” indication will turn off, and the normal playback mode will be resumed. NOTE The repeat-play mode will be cancelled if you perform any of the following steps. . Press the “RPT” button and select CANCEL . Press the “ . Press the disc select button . Press the “SCAN” button . Press the “LOAD” button when there is free space in the CD magazine

” button

& Random playback

To playback a track/file(s) at random, press the “RPT” button for 0.5 second or longer while the track/file is playing. Each time you press the button, the mode changes in the following sequences.

NOTE . The “RDM” indication refers to the random playback of It randomly repeats the tracks on the CD. It is possible to select the function when formats other than the MP3/WMA

the tracks.

Audio 5-21

It

format CD is playing. . The “F-RDM” indication refers to the random playback in the folder. It ran- domly repeats the tracks in the folder. It is possible to select the function when an MP3/WMA format track is playing. . The “D-RDM” indication refers to the random playback of a disc. It randomly repeats the tracks in the CD. is possible to select the function when an MP3/WMA format track is playing. To cancel the random playback mode, press the “RPT” button again and select CANCEL. The “RDM” indication will turn off, and the normal playback mode will be resumed. NOTE Random playback will be cancelled if you perform any of the following steps. . Press the “RPT” button and select CANCEL . Press the “ . Press the disc select button . Press the “SCAN” button . Press the “LOAD” button when there is free space in the CD magazine

” button

– CONTINUED –

5-22 Audio

& Scan

The scan mode lets you listen to the first 10 seconds of each track/file in succes- sion. Press the “SCAN” button to start scanning upward beginning with the track/ file(s) following the currently selected one. After all track/file(s) in the disk/folder have been scanned, normal playback will be resumed. To cancel the scan mode, press the “SCAN” button again. NOTE The scan mode will be cancelled if you perform any of the following steps. . Press the “RPT” button . Turn the “TRACK” dial . Press the “ “FOLDER” button . Press the “

” side of the

” button

” or “

. Press the disc select button . Select the radio or AUX mode . Press the “LOAD” button when there is free space in the CD magazine . Press the “PTY/CAT” button . Turn off equipment . Turn the ignition switch to the “LOCK” position

the power of

the audio

For CD-DA:

For MP3/WMA:

& Display selection

! Page (track/folder title) scroll

If you press the “TEXT” button during playback, the indication will change to the next one in the following sequence.

If you press the “TEXT” button again for at least 0.5 second, the title will be scrolled so you can see all of it. NOTE The display is designed to show titles for up to 24 characters.

& Folder selection

& How to eject a CD from the

player (type A)

& How to eject CDs from the

player (type B)

Audio 5-23

! Ejecting a CD from the player Of the discs loaded, you can select and remove only one disc.

the “FOLDER” Press the “ ” side of the next folder. button briefly to select Press the “ ” side of the button briefly to go back to the previous folder. The folder title will be shown each time you press one of the buttons. NOTE . Selecting folders in this way is possible only within a single disc. . Only MP3/WMA folders are recog- nized when an attempt to select the next or previous folder is made. If no appropriate folder exists on the disc, pressing the “ ” side of the “FOLDER” button starts playback be- ginning with the first track/file (track).

” or “

”. The disc will be ejected.

When a disc is being played back or when a disc is in the player, press the eject button “ NOTE . Avoid driving the vehicle with a CD sticking out, because vibration might make it fall out. . If the disc is left ejected for more than approximately 15 seconds after the ignition switch is turned to the “OFF” position, a disc protection func- tion will operate, automatically reload- ing the disc. In this case, the disc is not played.

1. Use the disc select button to select the disc to be ejected.

– CONTINUED –

5-24 Audio

! Ejecting all discs from the player

(all disc ejection mode)

2. Briefly press the “ ” button. The selected disc will be ejected. The disc number indicator will this time. When you remove the ejected disc, the disc number indicator will turn off.

flash at

To remove more discs in succession, repeat steps 1 and 2.

If you continue to press the “

1. ” button, the player will produce beep sound and will enter the all disc ejection mode. At this time, the disc number indicator and “ALL EJECT” indicator will flash. 2. Remove the disc that has been ejected. The other discs loaded will then be ejected one after another. If you do not remove the disc that has been ejected, the “All disc ejection mode” will be canceled.

NOTE . Avoid driving the vehicle with a CD sticking out, because vibration might make it fall out. . If you press the “

” button while

the player is in all disc ejection mode, the mode will be cancelled following ejection of the disc that is currently being ejected. . If you press the “CD” button or “LOAD” button while the player is in all disc ejection mode, the player will draw in the discs that have been ejected and play them. & When the following mes-

sages are displayed

If one of the following messages is displayed while operating the CD player, determine the cause based on the follow- ing information. If you cannot clear those messages, please contact your SUBARU dealer. ! When “PUSH EJECT” is displayed Press the eject button to unload the disc. Check the disc for damage or deforma- tion, and also check that the correct disc is inserted. Do not try to unload the disc forcibly. Single CDs (i.e., 8 cm/3 inch CDs) are not supported, and if inserted, they will be immediately ejected and this message will be displayed. If the disc cannot be unloaded or this message remains dis- played, please contact your SUBARU dealer.

AUX unit operation (if equipped) & AUX jack

! When “CHECK DISC” is displayed Press the eject button to unload the discs. Check that the disc is not damaged or scratched, and also check that the disc is inserted correctly. This message may appear when using some CD-RW discs. Check that the disc type (i.e., 8 cm/3 inch CDs are not supported) and data format are correct. This player can only play MP3
and WMA data formats. If the disc cannot be unloaded or this message remains displayed, please contact your SUBARU dealer.

Except WRX STI

Audio 5-25

WRX STI

By connecting a commercial audio pro- duct to the vehicle, such as a portable audio player, you can hear its sound via the vehicle’s speakers. For the audio input jack, a stereo mini pin plug (3.5ø) can be connected. The con- nection cable is available at electrical appliance or similar stores. To use the AUX unit: 1. Connect a portable audio player to the AUX jack.

– CONTINUED –

5-26 Audio

2. Press the AUX input selection button “CD/AUX” on the audio control panel to turn on the auxiliary audio input. 3. Play back the portable audio player. Refer the portable audio player.

to the Owner’s Manual of

NOTE . The AUX jacks of the models with the genuine SUBARU navigation sys- tem are the RCA type. For detailed information, refer to the Owner’s Man- ual supplement for the navigation sys- tem. . The output sound of the portable audio player is not loud, and the sound via the vehicle’s speakers that are connected to the vehicle audio set may be very low. If you turn up the

Audio control buttons (if equipped)

These buttons are located on the spokes of the steering wheel. They allow the driver to control audio functions without taking his/her hands off the steering wheel.

& MODE button

volume of the audio set, the volume becomes louder. However, when you change from one portable audio player to another one, the volume levels via the vehicle’s speakers may be signifi- cantly louder compared to the prior device. To avoid a large volume differ- ence, turn down the volume when you change between portable audio players. . In some cases, when the sound volume of the portable audio player is low, the sound becomes bad when you turn up the volume of the vehicle audio system. In this case, adjust the sound volume of the portable audio player. . In some cases, noise occurs be- cause of a bad connection between the portable player of the vehicle audio system or for the player.

The “MODE” button is used to select the desired audio mode. Each time it is pressed, the mode changes to the next one in the following sequence:

Audio 5-27

! MUTE button

” button if you wish to

Press the “ immediately cut the volume to zero. The audio display will show “MUTE”. If you press the button again, the original sound volume will return and “MUTE” turns off.

*1: The frequency last received in the selected waveband will be displayed. *2: Only when a CD is in the player. *3: Only when with an auxiliary audio product is connected.

! “

” and “

” buttons

(track) order. The track/file (track) number will be shown on the audio display. ! With SAT mode selected Press the “ ” button to skip forward in the channel order. Press the “ ” button to skip backward in the channel order. The channel will be shown on the audio display. ! Volume control buttons

” button or “

! With radio mode selected Press the “ ” button. The radio will seek the next receivable station and stop on it. That station’s frequency will be shown on the audio display. ! With CD mode selected Press the “ ” button to skip forward in the track/file (track) order. Press the “ ” button to skip backward in the track/file

Press the “+” button to increase the volume. Press the “−” button to reduce the volume. A number indicating the volume will be shown on the audio display.

5-28 Audio

Precautions to observe when handling a compact disc

Use only compact discs (CDs, CD-Rs and CD-RWs) that have the mark shown in the following. Also, some compact discs cannot be played.

If

. You cannot use a DualDisc in the CD player. If you insert a DualDisc into the player, the disc may not come out again, possibly causing the player to malfunction. . In cold and/or rainy weather, dew can form inside the CD player, preventing normal operation. this happens, eject the CD and wait for the player to dry out. . Skipping may occur when the CD player is subjected to severe vibration (for example, when the vehicle is driven on a rough surface). . To remove a disc from the case, press the center of the case and hold both edges of the disc. If the disc surface is touched directly, contamination could cause poor tone quality. Do not touch the disc surface. . Use a clean disc whenever possible. If

Audio 5-29

there are deposits, wipe the disc surface from the center outward with a dry, soft cloth. Be sure not to use a hard cloth, thinner, benzine, alcohol, etc. . Do not use any disc that is scratched, deformed, or cracked. Also, do not use any disc that has a non-standard shape (for example, a heart shape). Malfunctions or problems might result. . A disc is vulnerable to heat. Never keep it either in places exposed to direct sunlight, near heaters or in vehicles parked in the sun or on hot days.

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

— — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Interior lights ....................................................... Dome light .......................................................... Cargo area light (5-door models) ......................... Map lights ........................................................... Sun visors ........................................................... Vanity mirror ....................................................... Storage compartment ......................................... Glove box ........................................................... Center console.................................................... Coin tray (if equipped)......................................... Cup holders ......................................................... Front passenger’s cup holder .............................. Rear passenger’s cup holder (if equipped) ........... Bottle holders ...................................................... Accessory power outlets.................................... Use with a cigarette lighter (if equipped) ..............

6-2
6-2
6-2
6-3
6-4
6-4
6-4
6-5
6-5
6-5
6-5
6-5
6-7
6-7
6-8
6-9

Interior equipment

Ashtray (if equipped)......................................... Center console .................................................. Rear ashtray...................................................... Floor mat (if equipped)...................................... Shopping bag hook (5-door)............................. Cargo area cover (5-door – if equipped).......... Using the cover ................................................. To remove the cover .......................................... To install the cover housing ...............................

Cargo tie-down hooks

(5-door – if equipped).....................................

Under-floor storage compartment

(if equipped) ....................................................

6-10
6-10
6-10
6-11
6-11
6-12
6-12
6-12
6-13

6-13

6-14

6-2 Interior equipment

Interior lights

When leaving your vehicle, make sure the light to avoid battery dis- charge.

is turned off

& Dome light

1) ON 2) DOOR 3) OFF

The dome light switch has the following three positions. ON: The light remains on continuously. OFF: The light remains off. DOOR: The dome light illuminates auto- matically in the following cases. . Any of the doors or the rear gate (5- door) is opened.

. The doors or the rear gate (5-door) are unlocked using the remote keyless entry transmitter. . The ignition switch is turned from the “Acc” position to the “LOCK” position. The automatically illuminated dome light remains on for several seconds and then gradually turns off after all doors and the rear gate (5-door) are closed. While the light is illuminated, if any of the following operations are performed, the dome light turns off immediately. . The ignition switch is turned from the “LOCK” position to “Acc” or “ON” position. . All doors and the rear gate (5-door) are locked using the remote keyless entry transmitter.

The setting of the period for which the light remains on (OFF delay timer) can be changed as follows. . Models with genuine SUBARU navi- gation system: The setting can be changed using the navigation monitor. For details, please refer to the Owner’s Manual supplement for the navigation system. Also, the setting can be changed by a SUBARU dealer. Contact your SUBARU dealer for details.

. Models without genuine SUBARU navigation system: The setting can be changed by a SUBARU dealer. Contact your SUBARU dealer for details.

& Cargo area light (5-door

models)

ON position: The light illuminates when the rear gate is opened. The light remains illuminated for several seconds and gra- dually turns off after the rear gate is closed. OFF position: The light remains off.

& Map lights

Type A

Type B

To turn on the map light, push the switch. To turn it off, push the switch again.

is turned off

When leaving the vehicle, make sure the light to avoid battery dis- charge. NOTE For the type A map lights, although the light switches are in the ON position, the lights are automatically turned off after approximately 30 seconds of illumination to prevent the vehicle battery from discharging. For details, refer to “Battery drainage prevention function” F2-5. ! Automatic illumination (models

with moonroof)

The map lights illuminate automatically in the following cases. . Any of the doors other than the rear gate is opened. (The map lights do not illuminate when only the rear gate is opened.) . The doors are unlocked using the remote keyless entry transmitter. . The ignition switch is turned from the “Acc” position to the “LOCK” position. The automatically illuminated map lights remain on for several seconds and then gradually turn off after all doors are closed. While the lights are on,

if any of

the

Interior equipment 6-3