2003 Saab 9 5 Owners Manual

with directions, making reservations and other convenience services. *) New retail deliveries only.

Emergency button

In an emergency, press this button to connect with an OnStar advisor. Your call will be given the highest priority, and you will hear a tone fol- lowed by the words ”Connect- ing to OnStar Emergency.” An advisor will locate your Saab, find out what kind of assistance you require, and contact the nearest emergency services provider who can dispatch ambulance, fire, police or other emergency services. Please use this button only for true emergencies.

White dot button

Press this button at the end of a call. You’ll hear the words ”OnStar Request Ended.” Also, press this button to answer a call from the OnStar Center, or cancel a call if one of the other buttons is accidentally pressed. This button is also used to access OnStar Per- sonal Calling services which are described on page 116.

OnStar - Telematics

114
The OnStar Center Connecting to the OnStar center In addition to using the 3-button system found in your Saab, there are two other ways to connect to the OnStar Center. Toll-Free Call To take advantage of your OnStar services from outside your Saab, you can call OnStar toll-free at 1-888-4-OnStar (1-888-466-7827). Remember to have your Personal Identification Number (PIN) handy. Automatic Notification A priority signal will be sent to the OnStar Center with your exact location if an airbag deploys. (Vehicle electrical system and cellular service must be operable.)

Your personal identification number (PIN) When you signed up with OnStar, you were asked to provide a Personal Identification Number (PIN). You’ll need your PIN to access many of OnStar’s services. If, for example, your vehicle has been stolen, an OnStar advisor will ask for your PIN in order to provide assistance. Changing your PIN is easy. Call the OnStar Center and provide the advisor with your current number, and he or she will assist you in setting up a new number. If you have forgotten your PIN, just call the OnStar Cen- ter. For security reasons, we will send your PIN to you in the mail.

The OnStar Directions and Connections Plan The OnStar Safe and SoundPlan is part of the Directions and Connections Plan that comes with your vehicle.* With it, you have access to a complete range of services pro- viding you with an unsurpassed level of safety and security — 24 hours a day, 7 days a week. And you have it all at the touch of a button. So whether you’re on a lonesome country road or stuck in highway traffic, you have at your disposal a complete range of services providing you with unsurpassed security. And you have it all at the touch of a button. Automatic notification of air bag deployment Should your front air bags deploy, a priority signal will be sent to the OnStar Center with your Saab´s location (as long as cellular service and the vehicle’s electrical system are operable). An advisor will attempt to contact you to assess the nature of your emergency, and then notify the appropriate emergency services provider. Emergency services Should you require emergency assistance, press the red emergency button and On Star or an advisor will contact the nearest emergency services provider with your exact location and your request for help. * New retail deliveries only.

Roadside assistance** There’s nothing worse than being stranded on the road with car trouble. No matter what the problem is (flat tire, out of gas, or engine trouble), just call OnStar. They will contact the help you need to get you quickly back on the road. Stolen vehicle tracking OnStar doesn’t just protect you, it protects your Saab, too. If your vehicle is ever stolen, just contact OnStar by calling 1-888-4-ONSTAR. They will put you in touch with the authorities and aid them in locating your Saab. Ask your insurance car- rier about possible premium discounts. Accident Assist™ Accident Assist™ provides step-by-step guidance about what to do in case of a crash. Working with leading insurance com- panies OnStar has developed a ”best prac- tices” list to assist you through most acci- dent situations. OnStar Accident Assist™ can make the process of completing a police report and/or insurance claim less stressful.

OnStar Med-Net*** OnStar MED-NET securely stores your per- sonal medical information (e.g., physician’s name, emergency contacts, medications, chronic conditions) and, in an emergency, can quickly send it to a medical facility. This important information can help assist with diagnosis and treatment. **** **There will be no charge for Roadside Assistance as long as your vehicle is under warranty. ***Requires activation and additional fee. ****Not available in Canada. Hands-free communication Talking to an OnStar advisor is easy and hands-free. Simply press the OnStar but- ton, and a small microphone picks up your voice while the OnStar advisor talks to you through your stereo speakers. Note: Audio system must be switched on. You can even adjust the volume to your liking with the steering wheel controls or the radio volume knob. Your hands remain on the steering wheel, while your eyes remain on the road. Being safe on the road is important, but there’s more to life than security. There’s liv- ing. That’s why we have created the OnStar Directions and Connections Plan. It gives you not only the important protections of the Safe and Sound Plan, but also a whole range of services which truly change driving from a chore to a luxury. All new Saab models come with one full year of the OnStar Directions and Connections Plan.* * New retail deliveries only.

OnStar - Telematics

115

The OnStar Premium Services Plan * Route support With OnStar Route Support, an advisor can help you find your way, no matter how far off course you are. You can get exact street directions, or guidance to nearby gas sta- tions, restaurants, hotels or ATMs. Ride Assist If you need a lift, anytime of the day or night, just call OnStar. They’ll contact transporta- tion and send it right to you. Information and Convenience ser- vices OnStar advisors have access to over five million service listings including hotels, res- taurants, gas stations, dealerships, hospi- tals, ATMs and airports — more than 250 service categories in all. OnStar advisors can even assist you with hotel and restau- rant reservations. *All Saab models come with a full year of Premium Ser- vice. New retail deliveries only.

116

OnStar - Telematics

Online Concierge services From shopping to travel to entertainment and more, OnStar’s online concierge can help you make the most of your time. Login to www.myonstar.com and simply select a city, choose a category and ask away. Get instant answers in a live online chat with an OnStar Advisor or send an email if you pre- fer. You can also view OnStar’s recommen- dations for top picks in eight categories like dining, travel and sports and recreation.

Signing Up for Personal Calling As an OnStar subscriber, the Personal Call- ing capability is already built into your Saab’s OnStar hardware. In order to use this service, an OnStar advisor must set up your cellular account. You must also pro- vide a credit card in order to establish your prepaid cellular account. Usage charges will be deducted from this prepaid account of ”units.” Units are easily replenished using the credit card on file at OnStar. Once you sign up for OnStar Personal Calling, you will be given your own personal phone number that others can use to call into your Saab. To sign up for Personal Calling, simply (cid:127) Press the OnStar button in your Saab.

Inform the advisor that you would like to sign up for Personal Calling.

(cid:127) The advisor will set up your account.

You will need to provide account and credit card information.

Additional Services Personal Calling As an OnStar Safe and Sound Plan or Directions and Connections Plan sub- scriber, you have access to OnStar Per- sonal Calling. OnStar Personal Calling pro- vides you with a nationwide wireless phone service in your Saab that you can activate simply by pressing a button and using your voice. You can use Personal Calling in your Saab to place or to receive calls. The voice-activated system will dial the number. Your party will answer through your stereo speakers. With OnStar Personal Calling, you can enjoy the simplicity of a one-touch wireless connection. Whether you are placing or receiving a call, once you press the button, you never have to take your hands off the wheel or your eyes off the road. The ease of the hands-free communication service allows you to enjoy an even greater level of safety, security and convenience while driv- ing. This new service is not yet available in all areas. Complete availability in the U.S. is anticipated in 2001*. For system limitations and details, call OnStar at 1-800-ONSTAR-7. * Availability in Canada was undetermined at time of publication. Please contact your local dealer in Canada.

(cid:127) Voice Commands Personal Calling is made available through your voice commands to the system. This allows you to verbally control all of the phone functions. Your OnStar wireless phone system has been programmed to respond to a wide vari- ety of voices and accents. You should speak distinctly in a normal speaking vol- ume. It is not necessary to exaggerate your voice or to speak loudly. Speak numerical digits one at a time, and then wait for confir- mation before going to the next digit. Voice Command Error Messages Pardon – The system has not been able to match your command with a word that it knows. Repeating the command distinctly should fix the problem. Slower Please – Repeat the command after a short pause. This response normally happens if you say a command before the system is ready for it or if there is substantial background noise.

Universal Commands Help – The system will provide a list of avail- able commands. Clear – When you are entering digits, this command will erase the last digit entered. Cancel – This command takes you from the current function to the ”Ready” prompt. If the last response from the system was ”Ready,” this command will exit voice recognition. Placing a Call There are three ways to place a call: 1 By using a particular number, say ”DIAL” 2 By using a stored nametag, say ”CALL” 3 By dialing the last number, say

”REDIAL”

To dial a number:

1 Press the

OnStar White Dot button 2 Say ”DIAL”

3 Say the 1st

Digit

4 Say the 2nd

OnStar will respond ”Ready”

OnStar will respond ”Number Please” OnStar will repeat the number OnStar will repeat the number

Digit Continue saying numbers in this man- ner until finished

5 Say ”DIAL”

OnStar will respond ”Dialing ,” then make the call

OnStar - Telematics

117

To dial using a ”Nametag”:

1 Press the

OnStar White Dot button 2 Say ”CALL”

3 Say ”

nametag>”

OnStar will respond ”Ready”

OnStar will respond ”Nametag Please” OnStar will respond ”Calling ”, then make the call

To redial the last number dialed:

1 Press the

OnStar White Dot button

OnStar will respond ”Ready”

2 Say ”REDIAL” OnStar will respond

”Redialing”, then make the call

Receiving a Call If someone calls your wireless phone num- ber, the entertainment system in your Saab will mute (if it is on), and you will hear a phone ringing sound. To answer the call, simply press the White Dot button. Ending a Call When your call is finished, press the White Dot button to end the call. It is not possible to end a call using voice commands.

118

OnStar - Telematics

Storing/Deleting Numbers in Memory (Nametags) Storing a number Your OnStar system can store up to 20 numbers (up to 32 digits each) in memory that can be dialed by simply repeating the ”nametag.” To store a number:

1 Press the

OnStar White Dot button

OnStar will respond ”Ready”

2 Say ”STORE” OnStar will respond

3 Say the 1st

Digit

4 Say the 2nd

Digit

”Number Please” OnStar will repeat the number OnStar will repeat the digit

Continue saying numbers in this manner until finished 5 Say ”STORE”

again

6 Say ”” 7 Say ”” 8 Say ””

OnStar will respond ”Nametag Please” OnStar will respond ”Again” OnStar will respond ”Once More” OnStar will respond ”Storing ”

Deleting a Number from Memory To delete a nametag:

1 Press the

OnStar White Dot button

OnStar will respond ”Ready”

Units Remaining OnStar keeps track of the amount of calling time you have purchased and used in units. The number of total remaining units is stored within the OnStar system, and can be accessed easily.

2 Say ”DELETE” OnStar will respond

3 Say

””

4 Say ”YES”

”Nametag Please” OnStar will respond ”Delete , YES or NO” OnStar will respond ”Deleting ”

Setting Tone or Voice Response Your system comes from the factory with voice responses to your commands to con- firm that the system received the command or number you intended. For example, when you are entering a number, OnStar repeats the number back to you. You may change the system to respond with a tone response if you prefer. A ready tone, a digit tone, or a goodbye tone will respond instead of the voice. All other responses will still be by voice.

1 Press the

OnStar White Dot button 2 Say ”Voice Feedback”

OnStar will respond ”Ready”

OnStar will respond ”Voice Feedback is now ON/OFF”

1 Press the

OnStar White Dot button 2 Say ”Units”

3 Say ”Verify”

OnStar will respond ”Ready”

OnStar will respond ”Verify or Add” OnStar will respond ”You have # units remaining”

Adding More Calling Minutes / Units You can charge additional calling units with automatic refill by contacting OnStar, or by authorizing automatic unit refill on the OnStar subscriber website. For more infor- mation about the OnStar subscriber web- site, please see page 121. Automatic Replenishment If you run out of units during a call, your call will be terminated and you will be connected to OnStar for approval to replenish. You will be warned at the beginning of a call when you have ten or fewer calling units remain- ing.

Contact OnStar

1 Press the

OnStar White Dot button

OnStar will respond ”Ready”

2 Say ”Units” OnStar will respond

3 Say ”Add”

”Verify or Add” You will be connected to OnStar for replenish- ment

You will need your OnStar Personal Identi- fication Number (PIN) to authorize the charge to your credit card on file. If you are not in your Saab, you may call an OnStar Advisor at 1-888-4-ONSTAR (1-888-466-7827) to request unit replenish- ment.

OnStar - Telematics

119

Volume Control The volume of the audio portion of Personal Calling is controlled with your steering wheel volume controls or with the radio volume knob.

Security/Locking your System You can set up a four-digit Personal Secu- rity Code to ensure that unauthorized people do not use the calling capability of your system. With security set to ON, the system will not allow any personal calls. You must turn security OFF before calls can be made.

1 Press the

OnStar White Dot button

2 Say ”Security”

OnStar will respond ”Ready”

OnStar will respond ”Enter Four-Digit Security Code”

3 Say the 1st Digit OnStar will repeat

the digit

4 Say the 2nd Digit OnStar will repeat

the digit

5 Say the 3rd Digit OnStar will repeat

the digit

6 Say the 4th Digit OnStar reply ”Secu- rity (code # # # #) is now ON/OFF”

OnStar - Telematics

120
Virtual Advisor (expected availability fourth quarter 2000) Once you have activated Personal Calling, you can enjoy your time in your Saab even more with the OnStar Virtual Advisor. This service allows you to listen to your favorite news and information topics, such as weather reports, stock quotes and sports scores. You can even listen to your e-mail, whenever you want, without ever taking your eyes off the road. Using simple voice commands, you can browse your personal topics and skip or listen to those you choose. You can also search for additional information on special topics that interest you. To find out how to set up a customized pro- file, visit the OnStar subscriber website at www.onstar.com, or turn to the OnStar sub- scriber website section on page 31 of this guide. If you do not have Internet access, you can still take advantage of the OnStar Virtual Advisor services as a default profile will be set up for you. *

*Availability in Canada was undetermined at the time of publication. Please contact your local dealer in Canada.

Calling the Virtual Advisor

1 Press the

OnStar White Dot button

OnStar will respond ”Ready”

2 Say ”Virtual

Advisor”

You will be connected to Virtual Advisor

Getting Information from the Virtual Advisor The OnStar Virtual Advisor will prompt you for information you desire. These offerings will change to provide you with services and information that you and other subscribers want and need. The prompts are very clear and easy to understand and use. Information Available OnStar will continue to add new features and categories to the Virtual Advisor. The following general categories will give you an overview of the types of information avail- able to you. For complete up-to-date cate- gories, you can go to the Saab Cars USA, Inc. website at www.saabusa.com or the OnStar website at www.onstar.com, and then click on the link to the subscriber web- site.

Weather The OnStar Virtual advisor will deliver an up-to-date weather forecast for the current location of the vehicle. The forecast includes current temperature, daily high/low, tomorrow’s high/low, precipitation forecast, and unusual conditions. Stock Quotes The OnStar Virtual advisor can provide you with current quotes for the stocks you have specified in your customized profile as well as other requested stocks. All market data is delayed by twenty minutes. If you have not set your profile, you can still access the stock quote feature through your default profile and then request the stock of your choice. Sports Scores The OnStar Virtual advisor can provide you with scores for your favorite college and pro- fessional teams with up-to-the- minute high- lights, even if they are being broadcast on a local station. See the team selection option in your Mobile Profiler section of the sub- scriber section of OnStar.com. If you have not set your profile or are still using the default profile, you can access the sports option of the Virtual advisor and ask for an update on your favorite sport. You always have access to the options in the Vir- tual Advisor.

News Headlines The OnStar Virtual Advisor will provide cur- rent headlines for many different catego- ries, including:

International News Headlines

(cid:127) National News Headlines (cid:127) Technology Headlines (cid:127) Business Headlines (cid:127) Sports Headlines (cid:127) Entertainment Headlines E-mail Reader The OnStar Virtual Advisor allows you to lis- ten, and soon respond, to your e-mails any time you want. E-mail availability is based on the address(es) you provide to OnStar. Every Virtual Advisor enrollee will receive an E-mail account.

OnStar Subscriber Website As an OnStar subscriber, you have access to the OnStar subscriber website. The sub- scriber website will provide you with impor- tant facts about your OnStar subscription and allow you to customize your Virtual Advisor Mobile Profile. All this allows you to access up-to-the-minute information that can make your driving experience safer and more enjoyable. The subscriber website was designed to provide you with easy access to personal- ized information, learn more about OnStar, update your account information, plan your travel, receive weather information and interact with OnStar. You can also act like an OnStar advisor and pinpoint your Saab. To access the sub- scriber website, simply go to www.onstar.com, and then click on the OnStar subscriber link. The OnStar Sub- scriber website is a secured site that is password protected. You will be required to provide your OnStar account number and personal identification number (PIN). If you do not know your account number or PIN, contact OnStar at 1-888-4-ONSTAR. For security reasons, your PIN will be mailed to your address on record.

OnStar - Telematics

121

Limitations Not withstanding anything contained herein, OnStar's nonperformance hereun- der shall be excused if caused by act or omission of a cellular carrier or a third-party service provider, equipment failure, acts of God, strikes, equipment or facility shortage, or other causes beyond OnStar’s reason- able control. In addition, the liability of OnStar, if any, for any mistake, omission, interruption, delay, error, defect or other fail- ure in the service furnished, or in the equip- ment used in furnishing service, shall in no event exceed the amount of OnStar’s charges to subscriber for said service during the period so affected, provided that no liability shall result for outages of 24 hours or less. This manual includes the latest information at the time it was printed. We reserve the right to make changes to the products and services without prior notification. In order to provide you with excellent ser- vice, any call to the OnStar Center may be monitored or recorded. All features may not be available on all mod- els. Please consult your dealer for details.

(cid:127) 122

OnStar - Telematics

OnStar Operation: OnStar uses existing emergency service providers and cellular and satellite technol- ogies. OnStar requires cellular service to be available and operating for features to func- tion properly. Personal Calling: Existing OnStar service agreement required. Additional usage charges apply for Personal Calling. Interim 2001 model year availability in select markets. For system limitations and details, call 1-800-ONSTAR-7 or visit www.onstar.com. Virtual Advisor: Existing OnStar and Personal Calling ser- vice agreement required. Additional usage charges apply for Personal Calling. Interim 2001 model year availability in select mar- kets. For system limitations and details, call 1-800-ONSTAR-7 or visit www.onstar.com.

Additional Information Warranty OnStar is warranted as part of the Saab new vehicle limited warranty. A Note About Privacy At OnStar, we know you want to protect your privacy, and we take subscriber privacy very seriously. We never provide your per- sonal information to another company or person unless you authorize it, or we are required to by the legal process, or in such cases where you have provided it for billing purposes or you have requested a hotel res- ervation, are sending flowers, etc. Having this information on file with OnStar is a real advantage and helps you avoid repeating your credit card information over a cellular connection. Your trust is what we most value.

Transferring OnStar Because your OnStar 3-button system is an integral part of your Saab, it cannot be trans- ferred to another vehicle. Each OnStar system stays with the original car or truck in which it was installed. The one-year OnStar prepaid subscription applicable to new retail deliveries cannot be transferred to another vehicle. However, if you’ve purchased additional years of ser- vice and decide to dispose of your Saab, any remaining service will be refunded to you. Or, if you choose, you can have it trans- ferred to another vehicle on your account. Any service that is refunded or transferred will be prorated at the monthly rate in effect at the time of transfer. OnStar Subscription Information To renew your subscription or upgrade your plan, just push the OnStar button, or call the OnStar customer service department at 1-888-864-2801 between 7 am and 12 pm EST Monday-Friday; 8 am and 5 pm on Sat- urday.

Interior equipment and trunk

123
Interior equipment and trunk Steering wheel adjustment..................... 124 Rearview mirrors............. 125 Electric windows............. 131 Sunroof ............................ 132 Interior lighting................ 134 Sun visors........................ 135 Ashtrays........................... 135 Glove compartment ........ 136 Cup holders ..................... 138 Trunk ................................ 139 Spare wheel and tools .... 149 Fuel filler door ................. 150 Opening the fuel filler door in an emergency... 150

Interior equipment and trunk

124
Steering wheel adjustment Fore-and-aft and tilt adjustment of the steer- ing wheel is possible. Pull down the lever fully until you hear a click. Move the steering wheel to the desired position and then raise the lever. The lever should lock with a click. Make sure that the lever is fully locked before driving off.

WARNING

Never adjust the steering wheel unless the car is stationary.

To adjust the steering wheel

Horn The horn is sounded by pressing the central part of the steering wheel. Press closest to the steering wheel rim.

Interior equipment and trunk

125

Button for angling passenger’s mirror down on reversing

The mirrors are heated, and the heating comes on and goes off with the rear-window heater.

Adjusting the door mirrors 1 Select mirror 2 Use touch pad to adjust mirror

Rearview mirrors Door mirrors The door mirrors have auto dimming func- tion (option) and the passenger side door mirror is of the wide-angle ‘‘aspheric” type. The door mirrors are designed to fold back if knocked. They can also be fully retracted for parking in tight spaces, such as on the car deck of a ferry. Remember to fold them out again before driving off.

NOTICE

The door mirrors should be fully retracted before the car enters an automatic car wash.

Door mirror folded in

The adjusting switch is on the driver’s door. If the car is equipped with a programmable driver’s seat, the settings of the door mirrors can also be stored in the preset buttons for the seat (see page 14). Cars equipped with a programmable driver’s seat also have the ability to angle the passenger’s mirror down when revers- ing, e.g. for a better view of the curb. 1 Select reverse. 2 Press the tiny button adjacent to the

doormirror switch to tilt the mirror. The mirror will be reset automatically when reverse gear is deselected.

The mirror glass can also be adjusted man- ually by gently pressing the glass in the desired direction.

126

Interior equipment and trunk

Rearview mirror 1 Day position 2 Night position

Rearview mirror The rearview mirror has day/night positions that can be selected by means of a knob beneath the mirror. Adjust the mirror in day position.

Interior rearview mirror with garage opener, autodimming and compass (certain variants only)

WARNING

Make sure that people and objects are out of the way of a moving door or gate to pre- vent potential harm or damage. When programming the garage opener, you may be operating a garage door or gate operator. Do not use the garage opener with any garage door opener that lacks the safety stop and reverse feature as required by federal safety standards. (This includes any garage door opener model manufac- tured before April 1, 1982.). A garage door opener which cannot detect an object, signalling the door to stop and reverse, does not meet current federal safety standards. Using a garage door opener without these features increases risk of serious injury or death.

Retain your original garage door transmitter for future programming procedures (i.e., new vehicle purchase). It is also suggested that upon the sale of the vehicle, the pro- grammed garage opener buttons be erased for security purposes.

Buttons for garage opener and compass 1-3 Garage opener 4 LED 5 Compass/auto dimming ON/OFF 6 Compass bearing

Interior equipment and trunk

127

Preparations for first-time programming Before programming the garage opener for the first time, you must delete any factory codes. Press and hold buttons 1 and 3 for about 20 seconds until the LED starts to flash. This will delete the factory codes and initiate the programming phase. Programming the garage opener The garage opener can record and store the frequencies of three different remote con- trols. The battery in the remote control should be fairly new for programming to work well. 1 Turn the ignition to ON. 2 Hold the garage door remote control 3–7 cm from the rearview mirror. Sit where you can see the LED (4) during programming.

3 Press the remote control button and the desired button on the rear view mirror at the same time.

4 The LED will now start to flash, slowly at first and then rapidly. The rapidly flash- ing LED indicates that programming is complete and that you can release the buttons.

Reprogramming a button that has previ- ously been programmed 1 Press and hold the desired button on the

rearview mirror for the entire program- ming sequence.

2 The LED starts to flash slowly after

20 seconds.

3 Hold the garage door remote control 3 –7 cm from the rearview mirror and press the button on the remote control. 4 Reprogramming is complete when the

LED starts to flash rapidly.

The previous frequency is now erased and replaced by the new one. Reprogramming one button does not affect the other buttons. Complete erase Completely erase the memory of the garage opener by pressing and holding buttons 1 and 3 simultaneously for 20 seconds. Con- firmation is provided by the LED flashing rapidly for 10 seconds. A complete erase deletes the frequencies from all three buttons. It is not possible to erase the memory of a single button.

Opening a garage door Press and hold the appropriate button until the garage door starts to open. You can of course still use the original garage door remote control after you have programmed the garage opener in the rear- view mirror. Garage doors with rolling security codes Garage doors with rolling security codes manufactured after 1996 can be identified as follows: (cid:127) Read the garage door’s instruction man-

ual.

(cid:127) Programming the garage opener in the rearview mirror seems to be successful but the garage door does not open.

(cid:127) Press and hold the programmed button. The garage door uses a rolling security code if the LED flashes rapidly and after 2 seconds shines constantly.

128

Interior equipment and trunk

If the garage door remote control uses roll- ing security codes, proceed as follows having programmed the garage opener: 1 Localise the button labelled "learn" or

"smart" on the motor unit of the garage door. The location and colour of this button varies between makes.

2 Press and release the "learn" button on

the motor unit. Step 3 must be per- formed within 30 seconds of Step 2.

3 Press the programmed button on the rearview mirror twice (some garage doors require the button to be pressed three times; refer to the door’s instruc- tion manual).

Gate programming & Canada program- ming The remote control may stop transmitting during programming. If so, continue to hold the button on the rearview mirror and release and press the button on the remote control every other second, "cycling" until programming is completed. The LED will flash slowly at first and then rapidly. The rapidly flashing LED indicates that programming is complete and that you can release the buttons.

NOTICE

Switch off the power supply to the garage door or gate (or park the car beyond the range of the remote control) while pro- gramming using the "cycling" method to prevent damaging the electrical motor.

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) must accept any interference received, including inter- ference that may cause undesired operation. Changes or modifications not expressly approved by the manufacturer could void the user’s authority to operate the equipment. Canada only: This device complies with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interfer- ence that may cause undesired operation of this device.

Interior equipment and trunk

129

1 Forward-facing sensor 2 ON/OFF switch, auto dimming function 3 Rear-facing sensor

Rearview mirrors with auto dimming function (accessory/option) The autodimming is activated and deacti- vated with a short push on button 2. If the mirror is equipped with Garage Door Opener (option) the letter 1 is displayed on compass bearing display briefly when auto dimming is activated. When deactivating the letter 0 is displayed. The interior rearview mirror has two sen- sors, one forward-facing and one rear-fac- ing. They also activate and deactivate the auto dimming feature on door mirrors. The system is activated when the for- ward-facing sensor detects that it is dark outside and the rear-facing sensor detects. For example, if the car following has not dimmed its headlights. The rearview mirrors are then darkened to prevent the strong light source from dazzling the driver. This dark- ening is stepless. The mirrors return to their normal states when the strong light source diminishes. The auto dimming function can be turned OFF with the switch on the lower edge of the rear-view mirror. NOTE Towing a trailer can cause the system to malfunction, as the rear-facing sensor may sense light from the trailer.

130

Interior equipment and trunk

Compass The compass is integrated in the rearview mirror. The compass bearing is displayed in the top right-hand corner of the mirror and is updated every other second. The compass displays the car’s direction of travel: N, NE, E, etc. Switch the compass display on and off by pressing button 5 for 3 seconds.

Compass zones in Canada

Compass zones in US

Changing zones The earth’s magnetic fields vary depending on one’s position on the globe. If you drive your car from one magnetic zone to another the compass setting will need to be changed to ensure a correct bearing. 1 Study the illustrations to determine the

correct zone.

2 Press and hold button 5 until "ZONE" is shown in the display on the mirror (6 s). The zone number setting now is also shown.

3 Press button 5 repeatedly to change the zone number. There are 15 zones from which to choose. Once the correct zone is selected, release the button and wait 4 seconds. The compass will now display the bearing.

Calibration Calibration is performed automatically during travel. If an accessory, such as a mobile phone, is fitted and it can be assumed that the compass is affected, the compass may need to be calibrated manu- ally. 1 Press and hold button 5 until "CAL" and

the compass bearing are displayed (approx. 9 s).

2 Drive in circles (max. 5 mph/8 km/h) or drive as normal until "CAL" is no longer displayed.

Interior equipment and trunk

131

Electric windows

WARNING

Bear in mind the pinch hazard when the side windows are being wound up. (cid:127) Always remove the ignition key when you leave the car to prevent personal injury caused by the electric windows, for example, due to children playing. (cid:127) The person operating the electric win- dows is responsible for ensuring that no one, especially children, has their head, hands or fingers in the window openings, before raising the windows. Raising the windows could otherwise cause serious or fatal injuries.

The electric motors of the front windows are equipped with overload protection (inte- grated thermal protection). This protection operates when the windows are wound down automatically (switch pressed fully down).

1 Window switches 2 Switch for rendering rear door window switches inoperative

To open: Front windows: press the front of the switch Rear windows: Press the back of the switch. The switches for the front windows have a third position for automatic opening of the window. Press the switch fully down to lower the window completely. To cancel automatic lowering of the win- dow, lift the switch briefly.

To close: Front windows: Lift the front of the switch. Rear windows: Lift the back of the switch. The actuating motor will be switched off automatically when the window is fully closed or when the switch is released.

132

Interior equipment and trunk

Child safety: rear windows (ON/OFF) The window switches on the rear doors can be rendered inoperative by the ON/OFF switch in the panel on the center console. When the switch is ON, the rear side win- dows can be operated by the switch on each rear door. The switch’s back lighting will be activated. When the switch is OFF, the rear side win- dows can only be operated from the panel on the center console. When off, the switch’s back lighting will also be switched off.

Switch for rear side window

Sunroof (Option in Canada)

WARNING

Bear in mind the pinch hazard when clos- ing the sunroof. (cid:127) Always remove the ignition key when you leave the car to prevent personal injury caused by the electric sunroof, for example, due to children playing. (cid:127) The person operating the electric sun- roof is responsible for ensuring that no one, especially children, has their head, hands or fingers in the opening, before closing the sunroof. Operating the sunroof could otherwise cause serious or fatal injuries.

The sunroof is operated by the switch on the overhead panel above the rearview mirror. The sunroof can be opened partially or fully.

Interior equipment and trunk

133

Sunroof control 1 To open 2 To close 3 Ventilation position

The sunroof incorporates an interior, man- ual, sliding sun blind. After the car has been waxed, the sunroof may squeak or squeal on opening to the ventilation position. If this should occur, fully open the sunroof and, using washer fluid, wash the seal along the front edge, together with the paintwork that is in contact with the seal when the roof is closed.

Manual operation of sunroof

Emergency operation of sunroof In an emergency (e.g. if there is an electrical failure) the sunroof can be operated by a screwdriver. Remove the cover at the front of the sunroof opening, insert a screwdriver in the groove, and rotate. Rotate counterclockwise to close sunroof.

To open: (cid:127) Slide the control towards the rear to open

the sunroof to the comfort position. To open it fully, slide the control back a second time. Press the control to stop it earlier.

To close: (cid:127) Slide the control forwards until the sun-

roof is closed.

Ventilation position (cid:127) Press the middle of the control (when sun-

roof closed).

(cid:127) To close: slide the control forwards. To fully open the sunroof from the ventila- tion position, slide the control back.

134

Interior equipment and trunk

1 Interior lighting on continuously 2 Lighting comes on when a door is opened 3 Lighting always off

Interior lighting The interior lighting consists of one dome light in the front and one in the back, a map-reading light in the front, two reading lights in the back, floor courtesy lights in the front (in some model variants) and door courtesy lights on all doors. The courtesy lights come on automatically when the respective door is opened. Each reading light has its own switch adjacent to the lamp. The switch for the dome lights is on the front overhead panel. When the switch is in the mid-position (door-activated), the interior lighting will come on:

1 Reading lights 2 Dome light

Luggage-compartment lighting The luggage-compartment lighting comes on automatically when the trunk is opened and goes out when the trunk is closed. The lighting will also be switched off auto- matically after 20 minutes if the trunk has been left open.

(cid:127) When the car is unlocked from the out-

side.

(cid:127) When any door is opened. (cid:127) When the ignition key is withdrawn from

the ignition switch.

When the switch on the overhead panel is in the mid-position, the lighting is switched off automatically 30 seconds after the last door has been closed or when the ignition is switched ON. There is also a light in the sun visors. The light comes on when the cover over the vanity mirror is opened. When the ignition is OFF, if a door has been left open for 20 minutes, the interior lighting will be switched off automatically to save the battery.

Interior equipment and trunk

135

Sun visor

Front ashtray 1 Press soft to open/close 2 Pull out one side at an angle

Rear ashtray

Sun visors The car is equipped with double sun visors. One section of the visor can be indepen- dently pivoted to the side window. A vanity mirror is provided on the back of the sun visors. The vanity mirrors are illumi- nated when the cover is raised.

To refit, line up the slots on either side and slide it closed. Rear ashtrays Open the lid to use ashtray. To remove the ashtray, fully open the lid and lift the ashtray straight out. To refit the ashtray, make sure it engages the two square recesses in the door trim.

Ashtrays (accessory)

The car can be equipped with three ash- trays: one in the instrument panel fascia, and one in each rear door. A cigarette lighter is fitted adjacent to the front ashtray, and there is also one in the back of the center console. Front ashtray 1 To open the ashtray, push gently on the

center/upper part of the front and release to allow it to spring out.

2 Close the ashtray in the same way. To remove the ashtray, open it and after that pull left side out at an angle.

136

Interior equipment and trunk

Cigarette lighters (accessory/certain markets only)

Glove compartment

The car is provided with cigarette lighters next to the front ashtray and in the rear end of the center console. The cigarette lighter socket can also be used as power point, e.g. for a mobile phone. The ignition should be in the ON position. The cigarette lighter sockets can also be used for accessories (e.g. to charge a mobile phone) when the ignition is ON.

WARNING

The maximum combined load for the two cigarette lighter sockets is 240 W (20 A).

WARNING

The glove compartment must be closed while travelling. An open glove compart- ment door could cause leg injuries in the event of a crash.

The glove compartment can be cooled by the air conditioning (ACC) system. Cold air can be directed to the glove compartment for keeping drinks cool, etc. Slide the cover towards you to admit cold air. Additional storage facilities are provided (see next page).

Glove compartment. 1 To lock 2 To unlock

Sliding cover in glove compartment to admit cold air

Interior equipment and trunk

137

In the doors

On leading edge of front seats

On the back of the front seats

Console between front seats

At bottom of door pillars adjacent to front-seat backrests

Center armrest for rear seat

138

Interior equipment and trunk

WARNING

(cid:127) The cup holder should not be used to hold cups made of china, glass or hard plastic as these can cause injury in the event of a crash.

(cid:127) Use only for paper cups or aluminium

cans.

(cid:127) Avoid spillage, particularly of hot

drinks.

(cid:127) Avoid putting oversized cups in the

cup holder.

NOTICE

Take care not to spill any liquid on the audio system when using the cup holders. Soft drinks in particular can cause malfunction.

Cup holder in fascia 1 Press symbol to open 2 Lift bottom to close

Cup holders Cup holders are provided in the instrument panel fascia, in the center console compart- ment between the front seats, and in the rear-seat armrest. To access the cup holder in the instrument panel, press the symbol and release. To access the cup holder in the rear seat armrest, lower the armrest and press the front edge of the holder. Close in the same way. The number of cup holders provided may vary between models.

Cup holder in rear armrest Press the edge to open/close.

Cup holder in center console

Trunk Folding the rear seat, 9-5 Sedan The rear seat is split and the two sections can be folded indepen- dently. Folding down of the rear seat is easier if the front seats are not all the way back, and the rear head restraints are folded down. 1 Raise the rear seat cushions by pulling the loop located between the cushion and the backrest. A small pad will open up first. Con- tinue pulling the loop until the entire rear seat cushion is raised.

2 Tip the seat cushion forward. 3 Press the button adjacent to the respective backrest to release it. 4 Fold down the backrest.

Interior equipment and trunk

139

WARNING

(cid:127) Rear-seat passengers should always ensure that the head restraint is raised and in proper position for the seats to be occupied.

(cid:127) Keep hands well clear of all moving parts. (cid:127) Never place heavy objects on the rear window shelf. There is

always a danger of loose objects flying about and causing injury if the car should brake suddenly or be involved in a crash.

(cid:127) Before folding up the backrest, hang the outer safety belts

onto the hook on the respective courtesy handle to prevent them from becoming trapped.

(cid:127) Check that the back rest release button (3) is flush with the

surround before entering the rear seat.

Outer safety belt hooked onto courtesy handle

140

Interior equipment and trunk

WARNING

(cid:127) Place heavy items closest to the backrest and stow smaller

and lighter items on top.

(cid:127) Secure heavy and bulky items using the four tie down points

provided in the trunk. This will avert the danger of luggage flying around if the car should brake suddenly or be involved in a crash (see page 141).

(cid:127) Secure small items if the backrest is folded down or the

load-through hatch is open. Small items can also be thrown around inside the car and cause personal injury.

(cid:127) Do not exceed the load capacity of the car, as this will alter its

handling characteristics (see page 258).

(cid:127) Make sure that the seat cushions and backrests are properly

secured when folding them back to their normal position. Check that the button (item 3 on page 139) is flush with the surround before entering the back seat.

The tail pipe of the exhaust system can become very hot during driving. Bear this in mind when loading and unloading the car so that children, for example, do not burn themselves.

Trunk pass-through hatch A trunk pass-through hatch is incorporated in the rear seat backrest to enable long, narrow items to be carried inside the car. Items should not weigh more than 33 lbs. (15 kg) nor be more than 2 yards (2 metres) in length. See the label on the hatch. 1 Fold down the armrest. 2 Raise the hatch by lifting the handle. Before loading or unloading long items, switch off the engine and apply the handbrake. This averts the danger of the car moving off suddenly if a long item were to knock the gear or selector lever into gear.

WARNING

(cid:127) Anchor the load securely (e.g. using middle safety belt) to

avoid danger of injury resulting from displacement of load on hard braking.

(cid:127) Do not exceed the load capacity of the car, as this will alter its

handling characteristics (see page 258).

Tie Downs Four tie downs for securing the load are fitted inside the trunk. Place the load as far in as possible.

Interior equipment and trunk

141

142

Interior equipment and trunk

Safety belt located in its belt clip

Folding the rear seat, 9-5 Wagon Both the narrow and wide sections of the rear seat can be folded separately. Folding is facilitated if the front seats are not located too far back. The wide section cannot be folded separately if a cargo net is mounted on the rear of the backrest. 1 Make sure that the head restraint is in the down position. For

height adjustment refer to page 16.

2 Put the safety belts for the outer seat places in their respective belt clips, which are located near the backrest (see illustration). 3 Raise the rear seat cushions by pulling the loop located between the cushion and the backrest. A small pad will open up first. Con- tinue pulling the loop until the entire rear seat cushion is raised. 4 Fold the narrow section (right) of the backrest forward by raising

the opening handle on the right-hand side.

5 Fold the wide section of the backrest forward in the

corresponding manner.

6 Adjust the front seats for optimal driving/passenger comfort.

NOTICE

The safety belts for the outer seating positions should be put in their respective belt clips near the backrest to prevent them from being pinched when the rear seat is raised to the upright position.

Alternative location of the parcel shelf if this is removed: (cid:127) Folded up on the floor at the rear of the luggage compartment. (cid:127) On edge behind the backrests of the front seats.

WARNING

(cid:127) Do not travel in the back seat without ensuring that the head

restraint is set at a suitable height for the seats to be occupied.

(cid:127) Never allow anyone to sit on a folded backrest. (cid:127) Always be aware of the risk of pinching when handling moving

parts of the seating.

(cid:127) Never place heavy objects on the parcel shelf. There is always a danger of loose objects flying about and causing injury if the car should brake suddenly or be involved in a crash.

(cid:127) Make sure that the backrests are locked when they are folded back upright. Check that the two red warning-indication flags are fully down. This indicates that the backrests are locked. (cid:127) Check that the safety belt lock is not trapped under the seat

cushions when these are raised back up.

(cid:127) If the car is equipped with a pull-out cargo net on the rear of the backrest, take extra care when folding the rear seat so that no one is injured by the net’s storage cassette on the right-hand side.

Interior equipment and trunk

143

Folding the narrow section of the backrest The folding is facilitated if the front seat is not too far back. 1 Make sure that the head restraint is in the down position. For

height adjustment refer to page 16.

2 Put the safety belt in the belt clip near the backrest. 3 Raise the rear seat cushion by pulling the loop located at the rear

of the cushion. A small pad will open up first. Continue pulling the loop until the entire rear seat cushion is raised.

4 Fold the narrow section (right) of the backrest forward by raising

the opening handle.

5 Adjust the front seat for optimal passenger comfort.

NOTICE

The safety belts for the outer seating positions should be put in their respective belt clips near the back rest to prevent them being pinched when the rear seat is raised to the upright position, see illustration page 142.

144

Interior equipment and trunk

(cid:127) Never use the elastic floor net and

elastic side net when the rear seat is folded down. These nets are only intended to keep light objects tidy, not for the anchoring of loads.

(cid:127) If possible, avoid having the rear seat folded down when driving with a heavy load because the anchoring possibili- ties are restricted when the rear seat is in this position. That the rear seat is in the upright position is a basic requirement for protection against cargo displacement in the event of a crash.

(cid:127) Cargo can intrude into the passenger compartment during a sudden stop or front crash if the outer safety belts are not fastened. Check that the two red warning-indication flags are fully down. This shows that the backrests are locked.

WARNING

(cid:127) Match the speed and driving style

according to how the car is loaded. The driving characteristics of the car can be affected because the center of gravity is altered when there is a cargo in the luggage compartment.

(cid:127) An object weighing 55 lbs. (25 kg) cor-

responds to a weight of 2200 lbs. (1000 kg) in a head on crash at 32 mph (50 km/h).

(cid:127) Adjust the car’s load (passengers and

luggage) so that the gross vehicle weight or the axle weight is not exceeded, see page 258.

Driving with the trunk lid/tailgate open, see page 188.

Load anchoring

WARNING

(cid:127) Put heavy loads as low down and as

far forward as possible in the luggage compartment, i.e. against the back of the rear seat.

(cid:127) Never stack cargo so high that any part of the cargo lies above the edge of the backrest, if a cargo guard (accessory) is not being used.

(cid:127) Always tie down the cargo so that it

cannot be thrown forward during heavy braking or in the event of a crash.

(cid:127) Unsecured and heavy cargo can

increase the risk of injury during hard braking, sudden avoidance maneu- vers and in the event of a crash.

(cid:127) For the best load anchoring, use the special cargo bolts and load straps (accessory).

(cid:127) Load the cargo bolts evenly. Never

attach more than one strap to each tie down eye.

(cid:127) Provide protection on sharp edges to

prevent damage to the load straps.

Interior equipment and trunk

145

Cargo bolts mounted on the longitudinal rails

On the floor of the luggage compartment there are two longitudinal aluminium rails (CargoTracks™) where special cargo bolts can be mounted. The cargo bolts are mounted by lifting their locks and inserting them into the rail. Each cargo bolt is moved in the following way: pull up its lock and at the same time move it for- ward or backward to the desired position.

Example of cargo anchoring

Elastic cargo net for lighter objects.

Items for load anchoring: (cid:127) Cargo bolts (standard). (cid:127) Special load straps (accessory).

Items to keep light objects tidy: (cid:127) Elastic floor cargo net. (cid:127) Elastic side cargo net for the right-hand

side of the luggage compartment.

The elastic nets may only be used to keep light objects tidy, not for anchoring. The floor net should be attached to the cargo bolts that are mounted on the Car- goTracks™. Place the tie down eyes as far forward and as far back as possible on the CargoTracks™. The side netting should be attached to the two tie down eyes which are included in the

accessory kit and to two of the eyes mounted on the right-hand CargoTrack™ on the floor. The cargo bolts, load straps and elastic nets are stored in the two floor lockers on the right- and left-hand side of the luggage com- partment. The lockers are opened by lifting the respective fabric loop.

NOTICE

Do not place any objects so that the demisting and antenna elements on the inside of the window could be damaged.

146

Interior equipment and trunk

WARNING

(cid:127) The cargo in the luggage compart- ment must be anchored properly, even if the cargo net is correctly in position. The only purpose of the net is to prevent light objects from being thrown about in the cabin during heavy braking or in the event of a crash.

(cid:127) Take extra care when tipping the wide section of the rear seat forwards if the car has a pull-out cargo net on the rear of the backrest. Make sure that no one is injured by the cargo net’s storage cassette on the right-hand side where the backrest is already folded.

The pull-out cargo net can also be used when the whole rear seat is folded. There are two front attachment points in the roof for this purpose. Removing the cargo net storage cas- sette 1 Fold down the entire rear seat (see

page 142).

2 Push the cassette to the right.

Cover over the fixing point for the cargo net

Cargo net (accessory) The pull-out cargo net’s storage cassette is mounted on the rear of the backrest. 1 Remove the covers near the two rear

fixing points in the roof. Carefully bend in the lower edge of the cover with a screw- driver.

2 Pull the cargo net out directly back-

wards.

3 Snap the net’s two fasteners into the two

fixing points on the roof.

4 Make sure that the hooks on the net’s

own storage cassette fit against the net mesh.

Attaching the cargo net to the roof

Hooks on the net’s storage cassette

Interior equipment and trunk

147

Setting up the sliding floor

The function of the sliding floor is to facilitate loading and unloading. Securing loads, see page 141. When the car is parked and the floor is pulled out, it can bear the weight of two people (maximum 440 lbs./200 kg).

Setting up 1 Lift up the floor. 2 Fold out the support wheels. 3 Set the floor down on the support

wheels.

Sliding floor (accessory)

WARNING

To avoid personal injury take note of the following:

(cid:127) Do not leave children unsupervised when the sliding floor is drawn out.

(cid:127) Be aware of the risk of pinching when

handling the sliding floor.

(cid:127) Never drive the car with the sliding

floor pulled out.

(cid:127) Always use the car’s regular cargo

anchoring when transporting a cargo.

(cid:127) Provide protection on sharp edges to

prevent damage to the anchoring straps.

(cid:127) The sliding floor must not be changed

or modified in any way.

(cid:127) Put the sliding floor in the folded- down

position when it is not in use.

148

Interior equipment and trunk

Loading

Folding down the sliding floor

Trunk Release Handle

When the floor is not in use 1 Lift up the floor. 2 Fold down the support wheels. 3 Lay down the sliding floor and make sure

that it is locked in its lower position.

Loading/Unloading