2012 Nissan Titan Owners Manual

it

2. Press and hold the M button to advance

1. Press and hold the H button to advance

2. The hours will start flashing. Press the CAT button or SEEK button, to adjust the

or

or

FOLDER TRACK hours.

3. Press the DISP/CLOCK button again to

switch to the minute adjustment.

4. Press the CAT FOLDER button or SEEK TRACK button to adjust the minutes.

or or

5. Press the DISP/CLOCK button again to exit

the clock set mode.

The display will return to the regular clock display after 7 seconds, or you may press the DISP/CLOCK button again to return to the regu- lar clock display. For setting the clock on Type A and B audio systems see “Adjusting the time” in this section. DISP (display) button: The DISP (display) button will show text about MP3, SAT or CD information in the audio display. CD display mode To change the text displayed while playing a CD with text, press the DISP button. The DISP button will allow you to scroll through CD text as follows: Disc title ←→ Track title.

To change the default display mode, press the AUDIO knob repeatedly until DISPLAY MODE appears on the display, then rotate the knob to select the following display modes: Type A, B and E: Disc number ←→ Folder number. Type C and D: Disc title ←→ Track number ←→ Track title. Once the display mode is selected, press the AUDIO knob again to store the setting. If the AUDIO knob is not pressed within 8 seconds, the display will refresh with the last selected display mode setting. ● Disc number mode displays the current disc

number playing in the changer.

● Folder number mode displays the selected folder number and the track number that is currently being played.

● Disc title mode displays the title of the CD

being played.

● Track number mode displays the number selected disc and the track that is currently being played on the disk.

● Track title mode displays the title of the se-

lected CD track.

MP3 display mode

To change the text displayed when listening to an MP3/WMA CD with MP3/WMA text (when CD with text is being used), press the DISP button. The DISP button will scroll through the CD text as follows: Type A, B, C and D: Track title ←→ Artist title ←→ Folder title. Type E: Track title ←→ Folder title ←→ Artist title ←→ Disc number ←→ Folder number. To change the default display mode, press the AUDIO knob repeatedly until DISPLAY MODE appears on the display, then rotate the knob to select the following display modes: Type A, B and E: Disc number ←→ Folder number. Type C and D: Disc number ←→ Folder number ←→ Track title ←→ Artist title ←→ Folder title. Once a display mode is selected, press the AU- DIO knob again to store the setting. ● Disc number mode displays the selected disc number and the track number that is currently being played.

● Track title mode displays the track title of the

MP3/WMA file.

● Artist title mode displays the artist title of the

MP3/WMA file.

● Folder title mode displays the folder name

given to the MP3/WMA folder.

Display satellite radio display mode (if so equipped)

To change the text displayed when listening to satellite radio (if so equipped) press the DISP button. The DISP button will scroll through the broadcast information as follows: Name ←→ Title ←→ Current display mode. To change the default display mode press the AUDIO button to display mode and press the TUNE button to select the following display modes: Channel number ←→ Channel name ←→ Name ←→ Title. Once the display mode is selected press the AUDIO button again to store the setting. If the AUDIO button is not pressed after 8 seconds the display will refresh with the last selected display mode setting. ● Channel number mode displays the channel number of the selected satellite radio sta- tion.

● Folder number mode displays the selected folder number and the track number that is currently being played.

● Channel name mode displays the channel name of the selected satellite radio station. Display screen, heater, air conditioner, audio and phone systems 4-47

● Name mode displays the name of the artist, host or weather condition of the selected satellite radio station.

● Title mode displays the song title, show name, or temperature of the selected satel- lite radio station.

compact disc will automatically be turned off and the last radio station played will come on.

The FM stereo indicator ST will illuminate during FM stereo reception. When the stereo broadcast signal is weak, the radio will automatically change from stereo to monaural reception. FM/AM/SAT band select (Type A, D and E only):

Pressing the RADIO button will change the band as follows: AM ←→ FM or SAT* (satellite, if so equipped) When the RADIO button is pressed while the ignition switch is in the ACC or ON position, the radio will come on at the station last played.

FM/AM/SAT radio operation FM/AM/SAT band select (Type B and C only): Pressing the FM, AM, FM/AM or SAT radio select button will change the band to either FM, AM or SAT (satellite - if so equipped) radio stations. When the FM, AM, FM/AM or SAT* radio select button is pushed while the ignition switch is in the ACC or ON, the radio will come on at the station last played. The last station played will also come on when the POWER/VOLUME control knob is pressed ON. *No satellite radio reception is available and “NO SAT” is displayed when the SAT button is pressed unless optional satellite receiver and antenna are installed and an XM姞 satellite radio service subscription is active. Satellite radio is not available in Alaska, Hawaii and Guam. If a compact disc is playing when the FM, AM, FM/AM or SAT radio select button is pressed, the 4-48 Display screen, heater, air conditioner, audio and phone systems

*No satellite radio reception is available and “NO SAT” is displayed when the RADIO button is pressed to access satellite radio stations unless optional satellite receiver and antenna are in- stalled and an XM姞 satellite radio service sub- scription is active. Satellite radio is not available in Alaska, Hawaii and Guam.

The last station played will also come on when the POWER/VOLUME control knob is pressed ON.

If a compact disc is playing when the RADIO button is pressed, the compact disc will auto- matically be turned off and the last radio station played will come on.

The FM stereo indicator ST will illuminate during FM stereo reception. When the stereo broadcast signal is weak, the radio will automatically change from stereo to monaural reception.

TUNE/FOLDER·CAT button (Type A, B, C and D only):

Manual tuning

the

tune

radio, press

To manually TUNE/FOLDER·CAT button turn the tuning knob to right or left. To move quickly through the channels, press and or button down for hold either the more than 1.5 seconds.

the , or

or

CAT FOLDER (tuning) button (Type E only):

Manual tuning To manually tune the radio, press the CAT , or turn the tun- FOLDER button ing knob to right or left.

or

To move quickly through the channels, press and hold either the or button down for more than 1.5 seconds.

SEEK/TRACK button:

Seek tuning

or

Press the SEEK/TRACK button for less than 1.5 seconds to tune from high to low or low to high frequencies and stop at the next broadcasting station. To seek quickly through the channels, press and hold the SEEK/TRACK button for more than 1.5
seconds. When the button is released the radio will seek to the next broadcasting station. SCAN tuning (Type C only): Press the SCAN button to stop at each broad- casting station for 5 seconds. Pressing the SCAN button again during this 5 second period will stop scan tuning and the radio will remain tuned to that station. If the SCAN button is not pressed within 5 seconds, scan tuning moves to the next station. SCAN RPT tuning (Type A, B and D only): Press the SCAN RPT button for more than 1.5
seconds to stop at each broadcasting station (AM, FM or SAT if so equipped) for 5 seconds. Pressing the button again during this 5 second

period will stop scan tuning and the radio will remain tuned to that station. If the SCAN RPT button is not pressed within 5 seconds, scan tuning moves to the next station. PRESET A·B·C (Station memory opera- tions):

18 stations can be set for the FM, AM and SAT (satellite, if so equipped) radio to the A, B and C preset button in any combination of FM, AM or SAT stations.

1. Choose preset bank A, B or C using the

PRESET A·B·C select button.

2. Select the desired FM, AM or SAT station

band.

3. Tune to the desired station using manual, SEEK or SCAN tuning. Press and hold any of the desired station memory buttons (1 – 6) until a beep sound is heard.

4. The channel indicator will then come on and the sound will resume. Programming is now complete.

5. Other buttons can be set in the same man-

ner.

If the battery cable is disconnected, or if the fuse opens, the radio memory will be canceled. In that case, reset the desired stations.

Radio data system (RDS):

RDS stands for Radio Data System, and is a data information service transmitted by some radio stations on the FM band (not AM band). Cur- rently, most RDS stations are in large cities, but many stations are now considering broadcasting RDS data.

RDS can display: ● Station call sign, such as “WHFR 98.3”. ● Station name, such as “The Groove”. ● Music or programming type such as “Clas-

sical”, “Country”, or “Rock”. ● Artist and song information. If the station broadcasts RDS information, the RDS icon is displayed. Compact disc (CD) changer operation Place the ignition switch in the ACC or ON button, position and press the LOAD or then press one of the CD insert slots (1 – 6) . Insert the compact disc into the slot with the label side facing up. The compact disc will be guided automatically into the slot and start playing.

If the radio is already operating, it will automati- cally turn off and the compact disc will play.

Display screen, heater, air conditioner, audio and phone systems 4-49

disc was

If the system has been turned off while the com- pact the POWER/VOLUME or PWR/VOL control knob will start the compact disc. LOAD button (Type A, B, C and D only):

pressing

playing,

To insert a CD in the CD changer, press the LOAD button for less than 1.5 seconds. Select the loading slot by pressing a CD insert select button (1 – 6), then insert the CD.

To insert 6 CDs to the CD changer, press the LOAD button for more than 1.5 seconds.

The slot numbers (1 – 6) will illuminate on the display when CDs are loaded into the changer.

LOAD button (Type E only):

To insert a CD in the CD changer, press the button for less than 1.5 seconds. Se- lect the loading slot by pressing a CD insert select button (1 – 6), then insert the CD.

To insert 6 CDs to the CD changer, press and button for more than 1.5 seconds. hold the The slot numbers (1 – 6) will illuminate on the display when CDs are loaded into the changer.

CD button (Type B, C and E only):

When the CD button is pressed with the system off and the compact disc loaded, the system will turn on and the compact disc will start to play.

When the CD button is pressed with the com- pact disc loaded with the radio playing, the radio will automatically be turned off and the compact disc will start to play. CD·DVD button (Type A and D only): Press the CD·DVD button to toggle the radio between CD and DVD modes. When the CD·DVD button is pressed with the system off and the compact disc loaded, the system will turn on and the compact disc will start to play. When the CD·DVD button is pressed with the compact disc loaded with the radio playing, the radio will automatically be turned off and the compact disc will start to play. For more information on the DVD system see “Playing a digital video disc (DVD)” later in this section.

SEEK/TRACK button:

When the button is pressed while a com- pact disc is playing, the track being played re- turns to its beginning. Press several times to skip

back through tracks. The compact disc will go back the number of times the button is pressed.

button is pressed while the When the compact disc is playing, the next track will start to play from its beginning. Press several times to skip through tracks. The compact disc will ad- vance the number of times the button is pressed. (When the last track on the compact disc is skipped through, the first track will be played.)

TUNE/FOLDER·CAT button (Type A, B, C and D only):

CD: ● While playing a CD, press and hold the

TUNE/FOLDER·CAT button to fast forward or rewind a track on a CD.

or

MP3 CD: ● While playing an MP3 CD, press the

TUNE/FOLDER·CAT button to scan backward or forward through avail- able folders.

or

● Press and hold the TUNE/FOLDER·CAT to fast forward or re-

button wind a track on an MP3 CD.

or

4-50 Display screen, heater, air conditioner, audio and phone systems

CAT FOLDER button (Type E only):

CD: ● While playing a CD press the CAT FOLDER to fast forward or re-

or

button wind a track on a CD.

MP3 CD: ● While playing an MP3 CD, press the CAT to scan FOLDER button backward or forward through available fold- ers.

or

●

Press and hold the CAT FOLDER to fast forward or re-

button wind a track on an MP3 CD.

or

CD select buttons:

To play another CD that has been loaded, press a CD select button (1 – 6). SCAN/RPT button (Type A, B, D and E only):

When the SCAN/RPT play button is pressed while the compact disc is played, the play pattern can be changed as follows:

ALL DISC RPT → 1 DISC RPT→ 1 TRACK RPT → ALL DISC RDM → 1 DISC RDM → ALL DISC RPT

ALL DISC RPT: All discs loaded will be repeated. 1 DISC RPT: The disc that is currently playing will be repeated. 1 TRACK RPT: The track that is currently playing will be repeated ALL DISC RDM: Tracks from all discs will be played randomly 1 DISC RDM: Tracks from the disc that is cur- rently playing will be played randomly RPT RDM button (Type C only):

When the RPT RDM play button is pressed while the compact disc is played, the play pattern can be changed as follows: ALL DISC RPT → 1 DISC RPT→ 1 TRACK RPT → ALL DISC RDM → 1 DISC RDM → ALL DISC RPT ALL DISC RPT: All discs loaded will be repeated. 1 DISC RPT: The disc that is currently playing will be repeated. 1 TRACK RPT: The track that is currently playing will be repeated ALL DISC RDM: Tracks from all discs will be played randomly 1 DISC RDM: Tracks from the disc that is cur- rently playing will be played randomly

REAR ON·OFF (if so equipped): Pressing the REAR ON·OFF button for less than 1.5 seconds turns the rear seat audio controller on. REAR CONT ON will display. Pressing it again will turn the rear seat audio controller off. REAR CONT OFF will display. If the vehicle is not equipped with a rear seat audio controller, the display will show “REAR AV N/A”.

(SPEAKER CONTROL) button (Type A and D only):

button to turn the rear speakers Press the off and the headphones on. Press the but- ton again to turn rear seat speakers back on and the headphones off. CD EJECT:

Current/Selected disc:

● Press the

button, then press the slot number (1 – 6) for the desired disc. The compact disc will be ejected. If no slot num- ber (1 – 6) is pressed, the current loaded disc will be ejected. If the ejected disc is not removed within 15 seconds, the disc will reload.

Display screen, heater, air conditioner, audio and phone systems 4-51

All discs:

● Press and hold the

button for more than 1.5 seconds. The compact discs will be ejected one by one. If a disc is not removed button is within 20 seconds or the pressed again during the eject sequence, the entire disc eject sequence will be can- celed.

When this button is pressed while a compact disc is playing, the compact disc will eject and the last source will be played. CD IN indicator: The slot numbers (1 – 6) will illuminate if CDs have been loaded into the changer in CD mode only.

WHA0869

LHA0049

AUX jack (if so equipped) The AUX jack 䊊1 is located below the air condi- tioner controls. The AUX audio input jack accepts any standard analog audio input such as from a portable cassette tape player, MP3 player or a laptop computer. Press the AUX button to play a compatible device when it is plugged into the AUX jack.

CD CARE AND CLEANING ● Handle a CD by its edges. Do not bend the

disc. Never touch the surface of the disc.

● Always place the discs in the storage case

when they are not being used.

● To clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion.

● Do not use a conventional record cleaner or

alcohol intended for industrial use.

4-52 Display screen, heater, air conditioner, audio and phone systems

● A new disc may be rough on the inner and outer edges. Remove the rough edges by rubbing the inner and outer edges with the side of a pen or pencil as illustrated.

Type A Volume control switch 1. 2. MODE select switch 3. 4.

POWER on/off switch Tuning switch

WHA0611

WHA0612

Type B Volume control switch Phone operation switch Power on and MODE select switch Tuning switch

1. 2. 3. 4.

Display screen, heater, air conditioner, audio and phone systems 4-53

Change disc (CD):

for more Push the tuning switch than 1.5 seconds to change the playing disc up or down.

or

STEERING WHEEL SWITCH FOR AUDIO CONTROL (if so equipped) The audio system can be operated using the controls on the steering wheel. POWER on/off switch If you have the Type A switch, with the ignition switch placed in the ACC or ON position, push the POWER switch to turn the audio system on or off.

If you have the Type B switch, with the ignition switch placed in the ACC or ON position, push the MODE switch to turn the audio system on. MODE select switch Push the mode select switch to change the mode in the following sequence: PRESET A → PRE- SET B → PRESET C → CD* → DVD** (if so equipped) → AUX***. *This mode is only available when a CD is loaded.

**This mode is only available when a DVD is loaded into the DVD player.

***This mode is only available when a compatible auxiliary device is plugged into the AUX jack.

Volume control switch Push the volume control switch up or down to increase or decrease the volume.

Tuning

Memory change (radio):

While in one of the preset radio station banks (A, B or C), push the tuning switch for less than 1.5 seconds to change to the next preset station in memory. Seek tuning (radio):

or

for more Push the tuning switch than 1.5 seconds to seek the next or previous radio station. Next/Previous track (CD):

or

for less Push the tuning switch than 1.5 seconds to return to the beginning of the present track or skip to the next track. Push several times to skip back or skip through tracks.

or

This system searches for the blank intervals be- tween selections. If there is a blank interval within 1 program or there is no interval between pro- grams, the system may not stop in the desired or expected location.

4-54 Display screen, heater, air conditioner, audio and phone systems

REAR AUDIO CONTROLS (if so equipped) The headphones symbol illuminates on the front display when the rear audio controls are on. Two headphone jacks are provided so two rear seat passengers may listen to the audio system pri- vately. The rear volume controls can only increase the volume to the level at which the front radio volume control is set. One or two infrared headphones are included if the vehicle is equipped with the DVD entertain- ment system. Most portable radio headphones work with the rear audio controls. VOL (volume) button:

(SPEAKER CONTROL) button:

button to turn the rear speakers Press this off and headphones on. Press this button again to turn rear seat speakers back on and headphones off.

7.

Infrared headphone transmitter lens*

LHA0322

*Red transmitters will be visible when infrared headphones are on.

Display screen, heater, air conditioner, audio and phone systems 4-55

VOL (volume) control button

1. 2. MODE select button 3. 4. 5. 6. Headphone jacks

NEXT button SEEK button

speaker control button

To install the antenna rod, turn the antenna clock- wise. Tighten the antenna rod to specification using a suitable tool such as an open-end wrench. The antenna rod tightening specification is 3.4 – 3.6 N·m (30 – 32 in-lb). Do not use pliers to tighten the antenna as they can leave marks on the antenna surface. The antenna rod cannot be hand tightened to the proper specification.

CAUTION

Always properly tighten the antenna rod during installation or the antenna rod may break during vehicle operation.

MODE button: The MODE button allows the rear passengers to change between AM, FM, CD, DVD and AUX. The media options are listed on the face plate of the rear audio controls. When a source of media is selected, the media label will be illuminated. SEEK button: In AM or FM mode, the SEEK button allows the rear seat passengers to find the next radio station up or down the station band frequency. In CD mode, the SEEK button allows the rear passengers to find the next or previous selection on the CD. NEXT button: When the NEXT button is pressed while in AM or FM mode, the radio will change to the next preset. The NEXT button does not function while in SAT radio mode or when playing a DVD or CD. ANTENNA The antenna cannot be shortened, but can be removed. When you need to remove the antenna, turn the antenna rod counterclockwise.

4-56 Display screen, heater, air conditioner, audio and phone systems

NISSAN MOBILE ENTERTAINMENT SYSTEM (MES) (if so equipped)

LHA0389

WARNING

● The Mobile Entertainment System is designed for rear seat passenger view- ing only.

● The driver must not attempt to operate the Mobile Entertainment System while the vehicle is in motion so that full at- tention may be given to vehicle operation.

CAUTION

● The glass screen on the liquid crystal display may break if hit with a hard or sharp object. If the glass breaks, do not touch the liquid crystalline material, which contains a small amount of mer- cury. In case of contact with skin, wash immediately with soap and water.

● Use a damp, soft cloth when cleaning the Mobile Entertainment System com- ponents. Do not use solvents or clean- ing solutions.

Do not attempt to use the system in extreme temperature conditions [below -4°F (-20°C) or above 158°F (70°C)]. To avoid discharging the vehicle battery, do not operate the system more than 15 minutes without starting the engine.

LHA0316
DIGITAL VIDEO DISC (DVD) PLAYER CONTROLS Refer to “Playing a digital video disc (DVD)” later in this section for the function of each button.

EJECT button DVD slot ENTER button POWER on/off button

1. 2. 3. 4. 5. MODE button 6. 7. 8. 9. MENU button 10. DISPLAY button 11. NAVIGATION keys

Input jacks STOP button PLAY/PAUSE button

Display screen, heater, air conditioner, audio and phone systems 4-57

DISPLAY button

6. 7. MODE button SUBTITLE button 8. 9. AUDIO button 10. ANGLE button 11. CLEAR button 12. PAUSE button 13. PLAY button 14. FAST FORWARD/FAST REVERSE

button

15. MENU button 16. NAVIGATION keys 17. BACK button 18. NUMERIC KEYPAD REMOTE CONTROL Refer to “Playing a digital video disc (DVD)” later in this section for the function of each button.

LHA0317

LHA0315

FLIP-DOWN SCREEN The flip-down screen has a wireless remote con- trol receiver 䊊1 located at the bottom of the screen.

1. 2. 3.

POWER button STOP button NEXT TRACK/CHAPTER and PREVI- OUS TRACK/CHAPTER button TITLE button ENTER button

4. 5. 4-58 Display screen, heater, air conditioner, audio and phone systems

CAUTION

● The glass screen on the liquid crystal display may break if hit with a hard or sharp object. If the glass screen breaks, do not touch it. Doing so could result in an injury.

● The screen rotates down to view and up into the housing to store when not in use. Ensure that the screen is latched securely into the housing when stored.

SAA0720

SAA0721

Headphones Power ON/OFF:

Press the power button to turn the headphones on or off. Volume control:

Turn the volume control knob to adjust the vol- ume.

The headphones will automatically be turned off in 30 seconds if there is no sound during that period. To prevent the battery from being dis- charged, keep the power supply turned off when not in use.

NOTE: For optimum infrared headphone perfor- mance, increase the volume on the rear seat controller to the maximum level and adjust the infrared headphone volume us- ing the volume control on the headphones. Using a lower volume setting on the rear seat controller can cause static noise in the infrared headphones.

Display screen, heater, air conditioner, audio and phone systems 4-59

PLAYING A DIGITAL VIDEO DISC (DVD)

CAUTION

● Only operate the DVD while the vehicle engine is running. Operating the DVD for extended periods of time with the engine OFF can discharge the vehicle battery.

● Do not allow the system to get wet. Excessive moisture such as spilled liq- uids may system to malfunction.

cause

the

The driver must not attempt to wear the head- phones while the vehicle is in motion so that full attention may be given to vehicle operation.

While playing video CD media, this DVD player does not guarantee complete functionality of all video CD formats.

With the DVD player, you can hear DVD videos, video CDs and CDs using headphones. Passen- gers in the rear seat can enjoy the sound inde- pendently of the front seat.

Press the CD·DVD button located on the front controls to hear the sound of the DVD play through the speakers.

Press the REAR ON·OFF button located on the front controls to disable or enable rear seat audio controls. For more information on rear seat audio controls see, “Rear Audio Controls” earlier in this section.

button on the front controls Pressing the turns the rear speakers on or off and enables or disables the wireless headphones .

It is possible to operate the DVD player by remote control.

Headphones are a wireless type and no cables are necessary. You can use them in almost all the ranges in the rear seat. (It is not possible to use the headphones in the front seat.) POWER on/off button:

With the ignition switch placed in the ACC or ON position, press the POWER button to turn the DVD player on or off.

Insert the DVD into the slot with the label side facing up. The DVD will be guided automatically into the slot.

If the DVD player is off and a DVD is inserted, the DVD player will automatically turn on.

CAUTION

Do not force the compact disc into the slot. This could damage the player.

MODE select button:

Press the MODE button to select Audio/Video source between DVD and AUX input (input jacks on the faceplate, Red = right channel audio input, White = left channel audio input, and Yellow = Video input).

The display will show the “AUX” in the upper left corner of the display for 4 seconds once the Mode is changed to AUX.

To use the input jacks, refer to “Auxiliary input jacks” in this section.

or

PLAY:

When the PLAY/PAUSE button on the player or the PLAY button on the remote control is pressed, the player will play.

In play mode, the display will briefly show on the upper left corner of the display.

4-60 Display screen, heater, air conditioner, audio and phone systems

FF (Fast Forward), REW (Remote control only):

Press the FAST FORWARD/FAST REVERSE buttons to carry out the fast forward or fast re- verse presentation at 5 times normal play speed.

Press the FAST FORWARD/FAST REVERSE buttons again or PLAY button to resume the normal play speed.

NEXT CHAPTER/PREVIOUS CHAPTER (Remote con- trol only):

When the (NEXT CHAPTER) button is pressed while the DVD is playing, the program next to the present one will start to play from its beginning. Press several times to skip through programs. The DVD will advance the number of times the button is pressed. When the (PREVIOUS CHAPTER) button is pressed, the program being played returns to its beginning. Press several times to skip back through pro- grams. The DVD will go back the number of times the button is pressed.

or

PAUSE:

When the PLAY/PAUSE button on the player or the PAUSE button on the remote control is pressed, the player will pause playing of the media. In pause mode, the player will show on the upper left corner of the display until the player is changed to another mode.

STOP:

Press the STOP button once to stop playing the in the upper media. The display will show left corner of the display for 4 seconds, and the last disc position will be stored. When the PLAY button is pressed again, it will resume at the stored disc track and time position.

If the STOP button is pressed again when the player is already in Stop mode, it will reinitialize the pointer to the beginning of the disc. In effect, it will ignore the last stored disc position and upon receipt of the next play message, will begin at the Title Menu or at “the beginning of the disc”.

EJECT:

When the EJECT button is pressed with the DVD loaded, it will be ejected.

in The display will show the EJECT symbol the upper left corner of the display for 4 seconds once the EJECT button is pressed. If the DVD is not loaded, the display will show “NO DISC”. If the DVD comes out and is not removed within 25 seconds, it will be pulled back into the slot to protect it. DISPLAY: If the DISPLAY control is pressed for less than 2
seconds, the display menu will appear on the screen. ● The display menu will remain on the screen for 10 seconds if no subsequent control activations occur.

● Use the NAVIGATION KEYS to navigate within the display menu and use ENTER to select the item.

● Holding the DISPLAY control on the face- plate for longer than approximately 2 sec- onds while in the display menu will reset the display characteristics to their nominal val- ues. (Faceplate feature only)

Display screen, heater, air conditioner, audio and phone systems 4-61

If the DISPLAY control button on the faceplate is pressed for more than 2 seconds, the media track/time information will be displayed along the bottom of the display. Pressing the DISPLAY control for more than 2 seconds will remove the media track/time information from the display. (Faceplate feature only) NAVIGATION KEYS:

If media is in PLAY mode, activation of the NAVI- GATION KEYS (Up, Down, Left, and Right) will next perform the chapter/track, previous chapter/track, fast re- forward, and the display will verse and fast

functions:

following

respec- show tively in the upper left corner of the display for 4
seconds. (Faceplate feature only)

and

following

If media is in PAUSE mode, activation of the NAVIGATION KEYS (Up, Down and Right) will perform the next chapter/track, previous chapter/track and slow forward, and the display will show and a forward arrow symbol respectively in the upper left corner of the display for 4 seconds. (Faceplate feature only)

functions:

If display control menu is on, the NAVIGATION KEYS will be used to navigate Up, Down, Left, and Right within the menu. ENTER:

In MENU mode, press the ENTER button to se- lect MENU items.

In the display menu, press the ENTER button to select items for modification, as per the on- screen instructions. MENU:

If the media is in PLAY mode and the MENU button is pressed, the DVD menu will appear on the screen. Use the Navigation Keys to navigate within the menu and use ENTER to select the item. Press the MENU button again to return to PLAY mode. TITLE (Remote control only): Press the TITLE button to return the DVD media to the “title” of the DVD. Press the TITLE button again to return to the previous stop point and play. BACK (Remote control only): Press the BACK button to exit the current active menu and return to the previous menu.

SUBTITLE (Remote control only):

Press the SUBTITLE button to call up subtitle selection menu.

Repeatedly press the SUBTITLE button to cycle through each available subtitle. AUDIO (Remote control only):

Press the AUDIO button to call up the audio menu.

Repeatedly press the AUDIO button to cycle through each available audio track. ANGLE (Remote control only):

Press the ANGLE button to call up the camera angle menu.

Repeatedly press the ANGLE button to cycle through each available angle. CLEAR (Remote control only):

if actuated prior

Press the CLEAR button to clear all numeric inputs, the to expiration of 3-second timer. NUMERIC KEYPAD (0–9 & ≥10) (Remote control only):

Press the NUMERIC KEYPAD to directly access disc chapters, titles or tracks by inputting their numeric value.

If media is in activated MENU mode, the NAVI- GATION KEYS will be used to navigate Up, Down, Left, and Right within the menu. 4-62 Display screen, heater, air conditioner, audio and phone systems

the

can

cancel

operator

Use the “≥10” button to input numbers greater than or equal to 10. Up to three digits can be inputted when selecting the chapter/title/track number. The subsequent actuation of numeric buttons will continuously shift the previously input number to the “left”. The chapter/title/track number will be automati- cally selected (if valid, based on media content) if 3 seconds expire without any keypad inputs. The input chapter/title/track number by actuating the CLEAR control prior to the expiration of the 3-second timer. These functions can be used only for the DVD discs which correspond to them. Auxiliary input jacks The auxiliary input jacks are located on the control panel. Compatible devices such as video games, camcorders and portable video players can be connected to the auxiliary jacks. The auxiliary jacks are color coded for identifica- tion purposes. ● Yellow - video input ● White - left channel audio input ● Red - right channel audio input

To view the compatible device connected to the AUX jacks, press the MODE button. For more information, see “Mode select button” earlier in this section. CARE AND MAINTENANCE Use a lightly dampened, lint free cloth to clean the surfaces of your NISSAN Mobile Entertainment System (DVD player face, screen, remote control, etc.). Do not attempt to use the system in extreme temperature conditions [below -4°F (-20°C) or above 158°F (70°C)]. Do not attempt to operate the system in extreme humidity conditions (less than 10% or more than 75%).

CAUTION

● Do not use any solvents or cleaning solutions when cleaning the video system.

● Do not use excessive force on the moni-

tor screen.

● Avoid touching or scratching the moni- tor screen as it may become dirty or damaged.

HOW TO HANDLE THE DVD

LHA0049

CAUTION

● Handle a DVD by its edges. Never touch

the surface of the disc.

● To clean a disc, wipe the surface from the center to the outer edge using a clean, soft cloth. Do not wipe the disc using a circular motion.

● Do not use a conventional

record cleaner, benzine, thinner or alcohol in- tended for industrial use.

Display screen, heater, air conditioner, audio and phone systems 4-63

● A new disc may be rough on its inner and outer edges. Remove the rough edges using the side of a pen or pencil as illustrated.

● Never attempt to use a DVD that has been cracked, deformed, or repaired using adhesive. Doing so may cause damage to the equipment.

● Handle the DVD carefully to avoid contami- nation or flaws. Otherwise, signals may not be read properly.

● Do not write, draw or attach anything on any

side of the DVD.

● Do not store the DVD in locations with direct sunlight or in high temperatures or humidity. ● Always place discs in the storage case when

they are not being used.

● Do not put on any sticker or write anything

on either surface of the DVD.

LHA0484

DVD player operation precautions Do not use the following DVDs as they may cause the DVD player to malfunction:

● 3.1 in (8 cm) discs with an adapter.

4-64 Display screen, heater, air conditioner, audio and phone systems

● DVDs with a region code other than “1”. The region code 䊊A is displayed in a small symbol printed on the top of the DVD 䊊B .

● DVDs that are not round.

● DVDs with a paper label.

● DVDs that are warped, scratched, or

have unequal edges.

● Recordable

digital

video

discs

(DVD+R).

● Rewritable (DVD+RW).

digital

video

discs

If a DVD with a paper label is used and becomes jammed, you may be able to reset the unit and eject the jammed disc with the following procedure:

1. Record the radio presets. 2. Disconnect the negative terminal from

the battery for five minutes.

3. Reconnect the negative battery termi-

nal.

4. Check to see if the jammed DVD has been ejected. If it has not, try to eject the DVD by pushing the eject button.

5. If the disc cannot be ejected see your NISSAN dealer for further assistance.

6. Re-program the radio presets.

LHA0318

Remote control and headphones battery replacement Replace the battery as follows:

1. Open the lid.

2. Replace batteries with new ones. ● Size AA (remote control) ● Size AAA (headphones)

and

ends on Make sure that the the batteries match the markings inside the compartment. 3. Close the lid securely.

SAA0723
If the battery is removed for any reason other than replacement, close the lid se- curely. ● If you will not be using the remote control for long periods of time, remove the batteries.

● Replacement of

the batteries is needed when the remote control only functions at extremely close distances to the DVD player or not at all.

● Be careful not to touch the battery terminal. ● An improperly disposed battery can harm the environment. Always confirm local regu- lations for battery disposal.

Display screen, heater, air conditioner, audio and phone systems 4-65

● When changing batteries, do not let dust or oil get on the remote control and head- phones. FCC Notice: Changes or modifications not expressly ap- proved by the party responsible for compli- ance could void the user’s authority to op- erate the equipment. This device complies with Part 15 of the FCC Rules and RSS-210
of Industry Canada. Operation is subject to the following two conditions: (1) This de- vice may not cause harmful interference, and (2) this device must accept any inter- ference received, including interference that may cause undesired operation of the device.

CAR PHONE OR CB RADIO

When installing a CB, ham radio or car phone in your NISSAN, be sure to observe the following precautions; otherwise, the new equipment may adversely affect the engine control system and other electronic parts.

WARNING

● A cellular telephone should not be used for any purpose while driving so full attention may be given to vehicle op- eration. Some jurisdictions prohibit the use of cellular telephones while driving. ● If you must make a call while your ve- hicle is in motion, the hands free cellu- lar phone operational mode (if so equipped) is highly recommended. Ex- ercise extreme caution at all times so full attention may be given to vehicle operation.

● If you are unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop your vehicle.

CAUTION

● Keep the antenna as far away as pos- control

sible from the electronic modules.

● Keep the antenna wire more than 8 in (20 cm) away from the electronic con- trol system harnesses. Do not route the antenna wire next to any harness.

● Adjust the antenna standing-wave ratio as recommended by the manufacturer. ● Connect the ground wire from the CB

radio chassis to the body.

● For details, consult a NISSAN dealer.

4-66 Display screen, heater, air conditioner, audio and phone systems

BLUETOOTH姞 HANDS-FREE PHONE SYSTEM (if so equipped)

WARNING

● Use a phone after stopping your vehicle in a safe location. If you have to use a phone while driving, exercise extreme caution at all times so full attention may be given to vehicle operation.

● If you are unable to devote full attention to vehicle operation while talking on the phone, pull off the road to a safe location and stop your vehicle.

CAUTION

To avoid discharging the vehicle battery, use a phone after starting the engine.

WHA0878
make or receive a hands-free telephone call with your cellular phone in the vehicle.

Your NISSAN is equipped with the Bluetooth姞 Hands-Free Phone System. If you have a com- patible Bluetooth姞 enabled cellular phone, you can set up the wireless connection between your cellular phone and the in-vehicle phone module. With Bluetooth姞 wireless technology, you can

Once your cellular phone is paired to the in- vehicle phone module, no other phone connect- ing procedure is required. Your phone is auto- matically connected with the in-vehicle phone Display screen, heater, air conditioner, audio and phone systems 4-67

module when the ignition switch is placed in the ON position with the paired cellular phone turned on and carried in the vehicle. You can register up to 5 different Bluetooth姞 cellular phones to the in-vehicle phone module. However, you can talk on only one cellular phone at a time. Before using the Bluetooth姞 Hands-Free Phone System, refer to the following notes. ● Set up the wireless connection between a cellular phone and the in-vehicle phone module before using the hands-free phone system.

● Some Bluetooth姞 enabled cellular phones may not be recognized by the in-vehicle phone visit www.nissanusa.com/bluetooth for a recom- mended phone list and pairing.

module.

Please

● You will not be able to use a hands-free

phone under the following conditions: – Your vehicle is outside of the cellular ser-

vice area.

– Your cellular phone is locked to prevent it

from being dialed.

● When the radio wave condition is not ideal or ambient sound is too loud, it may be difficult to hear the other person’s voice dur- ing a call.

● Do not place the cellular phone in an area surrounded by metal or far away from the in-vehicle phone module to prevent tone quality degradation and wireless connection disruption.

● While a cellular phone is connected through the Bluetooth姞 wireless connection, the bat- tery power of the cellular phone may dis- charge quicker than usual. The Bluetooth姞 Hands-Free Phone System cannot charge cellular phones.

● If the hands-free phone system seems to be malfunctioning, see “Troubleshooting guide” later in this section. You can also visit www.nissanusa.com/bluetooth for trouble- shooting help.

– Your vehicle is in an area where it is difficult to receive a cellular signal; such as in a tunnel, in an underground parking garage, near a tall building or in a moun- tainous area.

● Some cellular phones or other devices may cause interference or a buzzing noise to come from the audio system speakers. Stor- ing the device in a different location may reduce or eliminate the noise. 4-68 Display screen, heater, air conditioner, audio and phone systems

● Refer to the cellular phone Owner’s Manual regarding the telephone charges, cellular phone antenna and body, etc.

REGULATORY INFORMATION FCC Regulatory information

– CAUTION: To maintain compliance with FCC’s RF exposure guidelines, use only the supplied antenna. Unauthorized antenna, modification, or attachments could damage the transmitter and may violate FCC regula- tions.

– Operation is subject to the following two con-

ditions:

1. This device may not cause interference and 2. this device must accept any interference, including interference that may cause unde- sired operation of the device.

IC Regulatory information – Operation is subject to the following two con- ditions: (1) this device may not cause interfer- ence, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

– This Class B digital apparatus meets all re- the Canadian Interference-

quirements of Causing Equipment Regulations.

BLUETOOTH威 is a trademark owned by Bluetooth SIG, Inc., U.S.A. and licensed to Visteon.

USING THE SYSTEM The NISSAN Voice Recognition system allows hands-free operation of the Bluetooth姞 Phone System.

If the vehicle is in motion, some commands may not be available so full attention may be given to vehicle operation. Initialization When the ignition switch is placed in the ON position, NISSAN Voice Recognition is initialized, which takes a few seconds. When completed, the amber light on the overhead console illumi- nates and the system is ready to accept voice button is pressed before commands. If the the initialization completes, the system will an- nounce “Hands-free phone system not ready” and will not react to voice commands.

Operating tips To get the best performance out of the NISSAN Voice Recognition system, observe the following: ● Keep the interior of the vehicle as quiet as possible. Close the windows to eliminate surrounding noises (traffic noises, vibration sounds, etc.), which may prevent the system from recognizing voice commands correctly. ● Wait until the tone sounds before speaking a command. Otherwise, the command will not be received properly.

● Start speaking a command within 5 seconds

after the tone sounds.

● Speak in a natural voice without pausing

between words.

Giving voice commands To operate NISSAN Voice Recognition, press and release the button located on the steering wheel. After the tone sounds, speak a command. The command given is picked up by the micro- phone, and voice feedback is given when the command is accepted. ● If you need to hear the available commands for the current menu again, say “Help” and the system will repeat them.

● If a command is not recognized, the system announces, recognized. Please try again.” Repeat the command in a clear voice.

“Command not

● If you want to go back to the previous com- mand, you can say “Go back” or “Correc- tion” any time the system is waiting for a response.

● You can cancel a command when the sys- tem is waiting for a response by saying, “Cancel” or “Quit.” The system announces “Cancel” and ends the VR session. You can button on the steering also press the wheel at any time. Whenever the VR session is cancelled, a double beep is played to indicate you have exited the system.

● If you want to adjust the volume of the voice feedback, press the volume control switches (+ or -) on the steering wheel while being provided with feedback. You can also use the radio volume control knob.

● In most cases you can interrupt the voice feedback to speak the next command by button on the steering pressing the wheel.

Display screen, heater, air conditioner, audio and phone systems 4-69

● To speed the operation you can say multiple

commands. For example, press the button then say “Phonebook, New entry” rather than “Phonebook.” Wait for the voice feedback prompt then say “New entry”.

How to say numbers

NISSAN Voice Recognition requires a certain way to speak numbers in voice commands. Refer to the following rules and examples. ● Either “zero” or “oh” can be used for “0”.

Example: 1-800-662-6200

– “One eight oh oh six six two six two oh

oh”, or

– “One eight zero zero six six two six two oh

oh”

● Words can be used for the first 4 digits

places only.

Example: 1-800-662-6200

– “One eight hundred six six two six two oh

oh”,

– NOT “One eight hundred six six two sixty

two hundred, and

– NOT “One eight oh oh six six two sixty two

hundred.

● Numbers can be spoken in small groups. The system will prompt you to continue en- tering digits, if desired.

Example: 1-555-1212 *123
– “One five five five one two one two star

one two three”

NOTE: For best results, say phone numbers as single digits. The voice command “Help” is available at any time. Please use the “Help” command to get information on how to use the system.

Example: 1-800-662-6200

– “One eight zero zero”

The system repeats the numbers and prompts you to enter more.

– “six six two”

The system repeats the numbers and prompts you to enter more.

– “six two zero zero”

● Say “pound” for “#”. Say “star” for “*” (avail- able when using the “Call International” command and the “Send” command during a call).

● Say “plus” for “+” (available only when using

the “Call International” command).

● Say “pause” for a 2 second pause (available

only when storing a phone book number).

● You can say “star” for “*” and “pound” for “#” at any time in any position of the phone number (available only when using “Call In- ternational” command). See “List of voice commands” and “Interna- tional” in this section for more information.

4-70 Display screen, heater, air conditioner, audio and phone systems

PHONE/END Press the session or end a call.

button to cancel a VR

GETTING STARTED The following procedures will help you get started using the Bluetooth姞 Hands-Free Phone System with NISSAN Voice Recognition. For ad- ditional command options, refer to “List of voice commands” in this section. Choosing a language You can interact with the Bluetooth姞 Hands-Free Phone System using English, Spanish or French. To change the language, perform the following.

1. Press and hold the

than 5 seconds.

button for more

2. The

system announces:

the “Press the ) button for PHONE/SEND ( the hands-free phone system to enter speaker adaptation mode or press the ) button to select a dif- PHONE/END ( ferent language.”

3. Press the

button.

For information on speaker adaptation, see “Speaker Adaptation (SA) mode” later in this section.

4. The system announces the current language and gives you the option to change the lan- guage to Spanish (in Spanish) or French (in French). Use the following chart to select the language.

NOTE:

You must press the the change the language.

button or button within 5 seconds to

Current language

English Spanish French

Press

(PHONE/SEND)

Press (PHONE/END)

to select Spanish English English

to select French French Spanish

5.

If you decide not to change the language, do not press either button. After 5 seconds, the VR session will end, and the language will not be changed.

Display screen, heater, air conditioner, audio and phone systems 4-71

WHA0879

CONTROL BUTTONS The control buttons for the Bluetooth姞 Hands- Free Phone System are located on the steering wheel.

PHONE/SEND Press the session or answer an incoming call.

button to initiate a VR

You can also use the button to skip through system feedback and to enter commands during a call. See “List of voice commands” and “During a call” later in this section for more information.

Pairing procedure

NOTE:

The pairing procedure must be performed when the vehicle is stationary. If the vehicle starts moving during the procedure, the procedure will be cancelled.

Main Menu “Setup” 䊊A

“Pair phone” 䊊B

“New phone” 䊊C

Initiate from handset 䊊D

Name phone 䊊E

Assign priority 䊊F

Choose ringtone 䊊G

1. Press the

button on the steering wheel. The system announces the available commands.

2. Say: “Setup” 䊊A . The system acknowledges the command and announces the next set of available commands.

3. Say: “Pair phone” 䊊B . The system acknowl- edges the command and announces the next set of available commands.

4. Say: “New phone” 䊊C . The system acknowl- edges the command and asks you to initiate pairing from the phone handset 䊊D . The pairing procedure of the cellular phone varies according to each cellular phone model. See the cellular phone Owner’s Manual for details. You can also visit www.nissanusa.com/bluetooth for instruc- tions on pairing NISSAN recommended cel- lular phones. When prompted for a Passkey code, enter “1234” from the handset. The Passkey code “1234” has been assigned by NISSAN and cannot be changed.

5. The system asks you to say a name for the

phone 䊊E . If the name is too long or too short, the system tells you, then prompts you for a name again. Also, if more than one phone is paired and the name sounds too much like a name already used, the system tells you, then prompts you for a name again.

6. The system asks you to assign a priority level 䊊F . The priority level determines which phone is active when more than one paired Bluetooth姞 phone is in the vehicle. Follow the instructions provided by the system or

refer to “Setup” later in this section for more information on changing priorities.

7. The system will ask if you would like to select a custom ring tone 䊊G . Follow the instruc- tions provided by the system or refer to “Setup” later in this section for more infor- mation on selecting ringtones.

Making a call by entering a phone number

Main Menu

“Call” 䊊A

Number (speak digits) 䊊B

“Dial” 䊊C

1. Press the

button on the steering

wheel. A tone will sound.

2. Say: “Call” 䊊A . The system acknowledges the command and announces the next set of available commands.

Say: “Call International” to dial more than 10
digits or any special characters.

3. Say the number you wish to call starting with the area code in single digit format 䊊B . If the system has trouble recognizing the correct phone number, try entering the number in the following groups: 3-digit area code,

4-72 Display screen, heater, air conditioner, audio and phone systems

3-digit prefix and the last 4-digits. For ex- ample, 555-121-3354 can be said as “five five five” as the 1st group, then “one two one” as the 2nd group, and “three three five four” as the 3rd group. For dialing more than 10 digits or any special characters, say “In- ternational”. See “How to say numbers” in this section, for more information.

4. When you have finished speaking the phone number, the system repeats it back and an- nounces the available commands.

5. Say: “Dial” 䊊C . The system acknowledges

the command and makes the call.

For additional command options, see “List of voice commands” in this section. Receiving a call When you hear the ring tone, press the button on the steering wheel.

Once the call has ended, press the on the steering wheel.

button

NOTE: If you do not wish to take the call when you button hear the ring tone, press the on the steering wheel.

For additional command options, see “List of voice commands” later in this section. LIST OF VOICE COMMANDS

Main Menu

“Call” or “Call International” “Phone Book” “Memo Pad” “Setup”

When you press and release the button on the steering wheel, you can choose from the commands on the Main Menu. The following pages describe these commands and the com- mands in each sub-menu. Remember to wait for the tone before speaking.

You can say “Help” to hear the list of commands currently available any time the system is waiting for a response.

If you want to end an action without completing it, you can say “Cancel” or “Quit” at any time the system is waiting for a response. The system will end the VR session. Whenever the VR session is cancelled, a double beep is played to indicate you have exited the system.

If you want to go back to the previous command, you can say “Go back” or “Correction” any time the system is waiting for a response.

When you get used to the menus in the system, you can talk ahead by saying more than one command at a time. For example, say, “Call five five five one two one two” or “Memo pad record.”

Also, when you get used to the system re- sponses, you can skip ahead to the tone by button on the steering wheel. pressing the button when the However, if you press the system is waiting for a response from you it will end the VR session. “Call”

Main Menu

“Call” or “Call International”

Name (speak name) 䊊A Number (speak digits) 䊊B “Redial” 䊊C “Call Back” 䊊D

Name (speak name) 䊊A If you have stored entries in the Phone Book, you can dial a number associated with a name and location.

Display screen, heater, air conditioner, audio and phone systems 4-73

See “Phone book” later in this section to learn how to store entries.

When prompted by the system, say the name of the phone book entry you wish to call. The system acknowledges the name.

If there are multiple locations associated with the name, the system asks you to choose the loca- tion.

Once you have confirmed the name and location, the system begins the call. Number (speak digits) 䊊B When prompted by the system, say the number you wish to call. Refer to “How to say numbers” and “Making a call by entering a phone number” in this section for more details. “Redial” 䊊C Use the Redial command to call the last number that was dialed within the vehicle.

NOTE:

The system will not redial the last number dialed by the handset keypad.

The system acknowledges the command, re- peats the number and begins dialing.

If a redial number does not exist, the system announces, “There is no number to redial” and ends the VR session. “Call back” 䊊D Use the Call Back command to dial the number of the last incoming call within the vehicle. The system acknowledges the command, re- peats the number and begins dialing. If a call back number does not exist, the system announces, “There is no number to call back” and ends the VR session. International For dialing more than 10 digits or any special characters, please say “international”. When the system acknowledges the command, the system will prompt you to speak the number. During a call During a call there are several command options button on the steering available. Press the wheel to mute the receiving voice and enter com- mands. ● “Help” — The system announces the avail-

able commands.

● “Go back/Correction” — The system an- nounces “Go back,” ends the VR session and returns to the call.

● “Cancel/Quit” — The system announces “Cancel,” ends the VR session and returns to the call.

● “Send/Enter/Call/Dial” — Use the Send command to enter numbers, “*” or “#” during a call. For example, if you were directed to dial an extension by an automated system:

Say: “Send one two three four.”

The system acknowledges the command and sends the tones associated with the numbers. The system then ends the VR ses- sion and returns to the call. Say “star” for “*”, Say “pound” for “#”.

● “Transfer call” — Use the Transfer Call com- mand to transfer the call from the Bluetooth姞 Hands-Free Phone System to the cellular phone when privacy is desired. The system announces, “Transfer call. Call transferred to privacy mode.” The system then ends the VR session. You can also issue the Transfer Call com- mand again to return to a hands-free call through the vehicle.

● “Mute” — Use the Mute command to mute your voice so the other party cannot hear it. Use the mute command again to unmute your voice.

4-74 Display screen, heater, air conditioner, audio and phone systems

NOTE:

If a call is ended or the cellular phone network connection is lost while the Mute feature is on, the Mute feature will be reset to “off” for the next call so the other party can hear your voice. “Phone book”

NOTE:

Phone book commands are not available when the vehicle is moving.

Main Menu

“Phone Book”

“New Entry” 䊊A “Edit” 䊊B “Delete” 䊊C “List Names” 䊊D

The Phone Book stores up to 40 names for each phone paired with the system. Each name can have up to 4 locations/phone numbers associ- ated with it.

NOTE: Each phone has its own separate phone book. You cannot access Phone A’s phone book if you are currently connected with Phone B. “New entry” 䊊A Use the New Entry command to store a new name in the system. When prompted by the system, say the name you would like to give the new entry. For example, say: “Mary.”

If the name is too long or too short, the system tells you, then prompts you for a name again. Also, if the name sounds too much like a name already stored, the system tells you, then prompts you for a name again. Once the system accepts the name and you confirm it is correct, the system asks for a location (Home, Office, Mobile or Other). For example, say: “Home.”

The system acknowledges the location. The system will ask you to say a phone number or to transfer a phone number stored in the cellular phone’s memory.

Enter a phone number by voice command:

For example, say: “five five five one two one two.” See “How to say numbers” in this section for more information.

To transfer a phone number stored in the cellular phone’s memory:

Say “Transfer entry.” The system acknowledges the command and asks you to initiate the transfer from the phone handset. The new contact phone number will be transferred from the cellular phone via the Bluetooth姞 communication link. The transfer procedure varies according to each cellular phone. See the cellular phone Owner’s also Manual can visit www.nissanusa.com/bluetooth for instructions on transferring phone numbers from NISSAN recommended cellular phones.

for details. You

The system repeats the number and prompts you for the next command. When you have finished entering numbers or transferring an entry, choose “Store.”

The system confirms the name, location and number. The system then asks if you would like to store another location for the same name. If you do not wish to store another location, the system ends the VR session.

Display screen, heater, air conditioner, audio and phone systems 4-75

“Edit” 䊊B Use the Edit command to alter an existing phone book entry or to add a 2nd, 3rd or 4th phone number to an existing entry.

When prompted by the system, say the name of the entry you wish to edit.

The system acknowledges the name and asks you for the location you would like to edit.

Say the name of the location.

The system acknowledges the location.

The system will ask you to say a phone number or to transfer a phone number stored in the cellular phone’s memory.

Enter a phone number by voice command:

For example, say: “five five five one two one two.” See “How to say numbers” in this section for more information.

To transfer a phone number stored in the cellular phone’s memory:

Say “Transfer entry.” The system acknowledges the command and asks you to initiate the transfer from the phone handset. The new contact phone number will be transferred from the cellular phone via the Bluetooth姞 communication link.

The transfer procedure varies according to each cellular phone. See the cellular phone Owner’s also Manual visit can