2009 Nissan Titan Owners Manual

Download PDF Manual
Spin balancing the wheels on the vehicle could lead to mechanical damage. c For additional information regarding tires, refer to (cid:147)Important Tire Safety Information(cid:148) (US) or (cid:147)Tire Safety Infor- mation(cid:148) (Canada) in the Warranty In- formation Booklet . Care of wheels c Wash the wheels when washing the vehicle to maintain their appearance. c Clean the inner side of the wheels when the is changed or the underside of the wheel vehicle is washed. c Do not use abrasive cleaners when washing the wheels. c Inspect wheel rims regularly for dents or corrosion. Such damage may cause loss of pressure or poor seal at the tire bead. c NISSAN recommends waxing the road wheels to protect against road salt in areas where it is used during winter. Maintenance and do-it-yourself 8-41 Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X 9 Technical and consumer information Capacities and recommended fuel/lubricants . . . . . . . . . 9-2 Fuel recommendation (without Flexible Fuel Vehicle option). . . . . . . . . . . . . . 9-3 Flexible fuel vehicle (FFV) fuel recommendation (if so equipped) . . . . . . . . . . . . . 9-4 Engine oil and oil filter recommendations . . . . . . . . . . 9-6 Air conditioner system refrigerant and oil recommendations . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-7 Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8 Engine . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-8 Wheels and tires . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-9 Dimensions and weights . . . . . . . . . . . . . . . . . . . . . . . . 9-9 When traveling or registering your vehicle in another country . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10 Vehicle identification . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10 Vehicle identification number (VIN) plate . . . . . . . . . 9-10 Vehicle identification number (chassis number) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-10 Engine serial number. . . . . . . . . . . . . . . . . . . . . . . . . . . 9-11 F.M.V.S.S./C.M.V.S.S. certification label . . . . . . . . . . 9-11 Emission control information label . . . . . . . . . . . . . . . 9-11 Tire and loading information label. . . . . . . . . . . . . . . . 9-12 Air conditioner specification label. . . . . . . . . . . . . . . . 9-12 Installing front license plate . . . . . . . . . . . . . . . . . . . . . . . . 9-12 Vehicle loading information . . . . . . . . . . . . . . . . . . . . . . . . 9-13 Terms . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9-13 Vehicle load capacity . . . . . . . . . . . . . . . . . . . . . . . . . . 9-13 Securing the load. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-16 Utili-track(cid:153) channel system (if so equipped) . . . . . . 9-17 Loading tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-22 Truck-camper loading information . . . . . . . . . . . . . . . . . . 9-23 Crew Cab Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-23 King Cab models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-23 Special Body vehicles. . . . . . . . . . . . . . . . . . . . . . . . . . 9-23 Location for center of gravity . . . . . . . . . . . . . . . . . . . . 9-23 Payload weight capacity. . . . . . . . . . . . . . . . . . . . . . . . 9-24 Measurement of weights . . . . . . . . . . . . . . . . . . . . . . . 9-24 Towing a trailer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-25 Maximum load limits . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-25 Towing load/specification. . . . . . . . . . . . . . . . . . . . . . . 9-29 Towing safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-33 Flat towing. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-41 Snow plow . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9-42 Uniform tire quality grading . . . . . . . . . . . . . . . . . . . . . . . . 9-42 Emission control system warranty . . . . . . . . . . . . . . . . . . 9-43 Reporting safety defects (US only) . . . . . . . . . . . . . . . . . 9-44 Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/20/08—tbrooks X Readiness for inspection/maintenance (I/M) test . . . . . 9-44 Event Data Recorders (EDR). . . . . . . . . . . . . . . . . . . . . . . 9-45 Owner(cid:146)s Manual/Service Manual order information . . . 9-46 In the event of a collision . . . . . . . . . . . . . . . . . . . . . . . 9-46 Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/20/08—tbrooks X CAPACITIES AND RECOMMENDED FUEL/LUBRICANTS The following are approximate capacities. The actual refill capacities may be a little different. When refilling, follow the procedure described in the (cid:147)Maintenance and do-it-yourself(cid:148) section to determine the proper refill capacity. Fuel Short wheel base Long wheel base Engine oil *8 Drain and Refill With oil filter change Without oil filter change Capacity (Approximate) US measure 28 gal 37 gal Imp measure 23-1/4 gal 30 gal 6-4/5 qt 6-1/2 qt 5-3/4 qt 5-1/2 qt Cooling system With reservoir 3-1/4 gal 2-5/8 gal Liter 105.8 140 6.5 6.2 12.2 Automatic transmission fluid Power steering fluid (PSF) Brake fluid Multi-purpose grease Air conditioning system refrigerant Air conditioning system oil Transfer fluid Front final drive oil Refill to the proper level according to the instructions in the (cid:147)Maintenance and do-it-yourself(cid:148) section. (cid:151) (cid:151) (cid:151) (cid:151) (cid:151) (cid:151) (cid:151) (cid:151) (cid:151) (cid:151) (cid:151) (cid:151) (cid:151) (cid:151) (cid:151) Recommended Fluids and Lubricants Unleaded gasoline with an octane rating of at least 87 AKI (RON 91) or E-85 Ethanol fuel for Flexible Fuel Vehicles *1 (cid:149) Engine oil with API Certification Mark *2 (cid:149) Viscosity SAE 5W-30 50% Genuine NISSAN Long Life Antifreeze/Coolant or equivalent 50% Demineralized or distilled water Genuine NISSAN Matic S ATF *3 Genuine NISSAN PSF or equivalent.*4 Genuine NISSAN Super Heavy Duty Brake Fluid*5 or equivalent DOT 3 NLGI No. 2 (Lithium Soap base) HFC-134a (R-134a)*6 NISSAN A/C System Oil Type S or equivalent *6 Genuine NISSAN Matic D ATF (Continental U.S. and Alaska) or Canada NISSAN Auto- matic Transmission Fluid *7 Genuine NISSAN Differential Oil Hypoid Super GL-5 80W - 90 or API GL-5 Viscosity SAE 80W-90 Gear Oil, *9 API GL-5 Synthetic 75W-140 Gear Oil or equivalent, *10 Genuine NISSAN Windshield Washer Concentrate Cleaner & Antifreeze or equivalent (cid:151) 1 gal (cid:151) 1-1/4 gal Rear final drive oil Windshield washer fluid (shared between front and rear wipers) *1: For further details, see (cid:147)Fuel recommendation.(cid:148) *2: For further details, see (cid:147)Engine oil and oil filter recommendations.(cid:148) *3: If Genuine NISSAN Matic S ATF is not available, Genuine NISSAN Matic J ATF may also be used. Using automatic transmission fluid other than Genuine NISSAN Matic S ATF or Matic J AFT will cause deterioration in driveability and automatic transmission durability, and may damage the automatic transmission, which is not covered by the NISSAN new vehicle limited warranty. *4: DEXRON(cid:153) VI type ATF or Canada, NISSAN Automatic Transmission Fluid (ATF) may also be used. *5: Available in mainland USA through your NISSAN dealer. *6: For further details, see (cid:147)Air conditioner specification label.(cid:148) *7: Genuine NISSAN Matic D ATF or equivalent (if available). *8: For further details, see (cid:147)Changing engine oil.(cid:148) *9: For hot climates, viscosity SAE 90 is suitable for ambient temperatures above 0(cid:176) C (32(cid:176) F). *10: See your NISSAN dealer for service. (cid:151) 4.5 9-2 Technical and consumer information Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X FUEL RECOMMENDATION (without Flexible Fuel Vehicle option) Use unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) num- ber (Research octane number 91). CAUTION c Only vehicles with the E-85 filler door label can operate on E-85. Fuel system or other damage can occur if E-85 is used in vehicles that are not designed to run on E-85. c Using a fuel other than that specified could adversely affect the emission control system, and may also affect the warranty coverage. c Under no circumstances should a leaded gasoline be used, because this will damage the three-way catalyst. c Do not use E-85 fuel in your vehicle. Your vehicle is not designed to run on E-85 fuel. Using E-85 fuel can damage the fuel system components and is not covered by the NISSAN new vehicle lim- ited warranty. Gasoline specifications NISSAN recommends using gasoline that meets the World-Wide Fuel Charter (WWFC) specifi- cations where it is available. Many of the automo- bile manufacturers developed this specification to improve emission control system and vehicle performance. Ask your service station manager if the gasoline meets the WWFC specifications. Reformulated gasoline Some fuel suppliers are now producing reformu- lated gasolines. These gasolines are specially designed to reduce vehicle emissions. NISSAN supports efforts towards cleaner air and sug- gests that you use reformulated gasoline when available. Gasoline containing oxygenates Some fuel suppliers sell gasoline containing oxy- genates such as ethanol, MTBE and methanol with or without advertising their presence. NISSAN does not recommend the use of fuels of which the oxygenate content and the fuel compatibility for your NISSAN cannot be readily determined. If in doubt, ask your service station manager. If you use oxygenate-blend gasoline, please take the following precautions as the usage of such fuels may cause vehicle performance problems and/or fuel system damage. c The fuel should be unleaded and have an octane rating no lower than that recommended for unleaded gasoline. c If an oxygenate-blend other than methanol blend is used, it should con- tain no more than 10% oxygenate. (MTBE may, however, be added up to 15%.) c If a methanol blend is used, it should contain no more than 5% methanol (methyl alcohol, wood alcohol). It should also contain a suitable amount of appropriate cosolvents and corro- sion inhibitors. If not properly formu- lated with appropriate cosolvents and corrosion inhibitors, such methanol blends may cause fuel system damage and/or vehicle performance problems. At this time, sufficient data is not avail- able to ensure that all methanol blends are suitable for use in NISSAN ve- hicles. If any driveability problems such as engine stall- ing and difficult hot-starting are experienced after using immediately change to a non-oxygenate fuel or a fuel with a low blend of MTBE. oxygenate-blend fuels, Technical and consumer information 9-3 Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X Take care not to spill gasoline during refu- eling. Gasoline containing oxygenates can cause paint damage. E(cid:150)85 fuel E-85 fuel is a mixture of approximately 85% fuel ethanol and 15% unleaded gasoline. E-85 can only be used in a Flexible Fuel Vehicle (FFV). Do not use E-85 in your vehicle. U.S. government regulations require fuel ethanol dispensing pumps to be identified by a small, square, orange and black label with the common abbreviation or the appropriate percentage for that region. Aftermarket fuel additives NISSAN does not recommend the use of any aftermarket fuel additives (for example, fuel injec- tor cleaner, octane booster, intake valve deposit removers, etc.) which are sold commercially. Many of these additives intended for gum, varnish or deposit removal may contain active solvents or similar ingredients that can be harmful to the fuel system and engine. Octane rating tips Using unleaded gasoline with an octane rating lower than recommended can cause persistent, heavy (cid:147)spark knock.(cid:148) ((cid:147)Spark knock(cid:148) is a metallic rapping noise.) If se- vere, this can lead to engine damage. If you 9-4 Technical and consumer information ignition timing may result detect a persistent heavy spark knock even when using gasoline of the stated octane rating, or if you hear steady spark knock while holding a steady speed on level roads, have a NISSAN dealer correct the condition. Failure to correct the condition is misuse of the vehicle, for which NISSAN is not responsible. Incorrect in spark knock, after-run and/or overheating, which may cause excessive fuel consumption or engine damage. If any of the above symptoms are en- countered, have your vehicle checked at a NISSAN dealer. However, now and then you may notice light spark knock for a short time while accelerating or driving up hills. This is not a cause for concern, because you get the greatest fuel benefit when there is light spark knock for a short time under heavy engine load. CAUTION c Your vehicle is not designed to run on E-85 fuel. Using E-85 fuel in a vehicle not specifically designed for E-85 fuel can damage fuel system components and is not covered by the NISSAN new vehicle limited warranty. c E-85 is a mixture of approximately 85% 15% unleaded ethanol and fuel gasoline. c U.S. government regulations require ethanol dispensing pumps to be identi- fied by a small, square, orange and black label with the common abbrevia- tion or the appropriate percentage for that region. FLEXIBLE FUEL VEHICLE (FFV) FUEL RECOMMENDATION (if so equipped) Your vehicle is designed to use (E-85) Fuel Etha- nol, (cid:147)Regular(cid:148) unleaded regular gasoline or any percentage of the two fuels combined. U.S. government regulations require Fuel Ethanol dispensing pumps to have a small, square, orange and black label with the common abbreviation or the appropriate percentage for that region. CAUTION Use of other fuels such as Fuel Methanol may cause powertrain damage or a loss of vehicle performance. Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X General information This information is for Flexible Fuel vehicles (FFV) only. FFV vehicles can be identified by the fuel filler door label that states Ethanol (E-85) or Unleaded Gasoline Only. This section only covers those sub- jects that are unique to Flexible Fuel vehicles. CAUTION Only vehicles with the E-85 filler door la- bel can operate on E-85. Fuel system or other damage can occur if E-85 is used in vehicles that are not designed to run on E-85. Ethanol Fuel (E-85) E-85 is a mixture of approximately 85% fuel etha- nol and 15% unleaded gasoline. WARNING c Ethanol vapors are extremely flam- mable and could cause serious per- sonal injury. c Never have any smoking materials lit in or near the vehicle when removing the fuel filler cap or filling the tank. c Do not use E-85 as a cleaning agent and never use it near an open flame. Fuel requirements Your vehicle will operate on both unleaded regular gasoline with an octane rating of at least 87 AKI (Anti-Knock Index) number (Research octane num- ber 91), or E-85 fuel, or any mixture of these two. For the best starting and vehicle driveability re- sults, do not continually switch between E-85 and unleaded regular gasoline. If you must switch fuels, NISSAN recommends the following: c do not switch when the fuel gauge indicates less than 1/4 full c add more than 5 gallons of fuel c operate the vehicle immediately after refuel- ing for a period of at least 5 minutes NOTE: When the ambient temperature is above 90(cid:176)F (32(cid:176)C), you may experience hard start- ing and rough idle following start up even if the above recommendations are followed. Starting The characteristics of E-85 fuel make it unsuit- able for use when ambient temperatures fall be- low 0(cid:176)F (-18(cid:176)C). In the range of 0(cid:176)F (-18(cid:176)C) to 32(cid:176)F (0(cid:176)C), you may experience an increase in the time it takes for you engine to start, and a deterioration in drivability (sags and/or hesita- tions) until the engine is fully warmed up. Fuel consumption Because E-85 fuel contains less energy per gal- lon than gasoline, you will experience an increase in fuel consumption. You can expect your fuel mileage to decrease by about 30% compared to gasoline operation. Replacement parts Many components in your Flexible Fuel Vehicle (FFV) are designed to be compatible with etha- nol. Always be sure that your vehicle is serviced with correct ethanol compatible parts. CAUTION Replacing fuel system components with non-ethanol compatible components can damage your vehicle and may also affect the warranty coverage. Maintenance If you operate your vehicle using E-85 fuel, follow the correct maintenance log shown in the (cid:147)NISSAN Service and Maintenance Guide(cid:148). CAUTION Do not use ethanol mixture greater than 85% in your vehicle. It will cause difficulty in cold starting and may affect drivability. Technical and consumer information 9-5 Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X Oil viscosity The engine oil viscosity or thickness changes with temperature. Because of this, it is important to select the engine oil viscosity based on the temperatures at which the vehicle will be oper- ated before the next oil change. Choosing an oil viscosity other than that recommended could cause serious engine damage. Selecting the correct oil filter Your new NISSAN vehicle is equipped with a high-quality genuine NISSAN oil filter. When re- placing, use a genuine NISSAN oil filter or its equivalent for the reason described in (cid:147)Change intervals(cid:148). Change intervals The oil and oil filter change intervals for your engine are based on the use of the specified quality oils and filters. Using engine oil and filters that are not of the specified quality, or exceeding recommended oil and filter change intervals could reduce engine life. Damage to the engine caused by improper maintenance or use of incor- rect oil and filter quality and/or viscosity is not covered by the NISSAN new vehicle limited war- ranty. ENGINE OIL AND OIL FILTER RECOMMENDATIONS Selecting the correct oil It is essential to choose the correct grade, quality and viscosity engine oil to ensure satisfactory engine life and performance. See (cid:147)Capacities and recommended fuel/lubricants(cid:148) earlier in this section. NISSAN recommends the use of an energy conserving oil in order to improve fuel economy. Select only engine oils that meet the American Petroleum Institute (API) certification or Interna- tional Lubricant Standardization and Approval 9-6 Technical and consumer information WTI0183 Committee (ILSAC) certification and SAE vis- cosity standard. These oils have the API certifica- tion mark on the front of the container. Oils which do not have the specified quality label should not be used as they could cause engine damage. Oil additives NISSAN does not recommend the use of oil additives. The use of an oil additive is not neces- sary when the proper oil type is used and main- tenance intervals are followed. Oil which may contain foreign matter or has been previously used should not be used. Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X CAUTION The use of any other refrigerant or oil will cause severe damage to the air condition- ing system and will require the replace- ment of all air conditioner system components. The refrigerant HFC-134a (R-134a) in your NISSAN vehicle does not harm the earth(cid:146)s ozone layer. Although this refrigerant does not affect the earth(cid:146)s atmosphere, certain government regula- tions require the recovery and recycling of any refrigerant during automotive air conditioner sys- tem service. A NISSAN dealer has the trained technicians and equipment needed to recover and recycle your air conditioner system refriger- ant. Contact a NISSAN dealer when servicing your air conditioner system. Your engine was filled with a high-quality engine oil when it was built. You do not have to change the oil before the first recommended change interval. Oil and filter change intervals depend upon how you use your vehicle. Operation under the following conditions may require more frequent oil and filter changes: c repeated short distance driving at cold out- side temperatures c driving in dusty conditions c extensive idling c towing a trailer c stop and go commuting Refer to the (cid:147)NISSAN Service and Maintenance Guide(cid:148) for the maintenance schedule. AIR CONDITIONER SYSTEM REFRIGERANT AND OIL RECOMMENDATIONS The air conditioner system in your NISSAN vehicle must be charged with the refriger- ant HFC-134a (R-134a) and the oil, NISSAN A/C system oil Type S or the exact equiva- lents. Technical and consumer information 9-7 Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X SPECIFICATIONS ENGINE Model Type Cylinder arrangement Bore x Stroke Displacement Firing order Idle speed A/T (in (cid:147)N(cid:148) position) Ignition timing (degree B.T.D.C. at idle speed) CO % at idle Spark plug Spark plug gap (Nominal) Camshaft operation This spark ignition system complies with the Canadian standard ICES-002. 9-8 Technical and consumer information VK56DE Gasoline, 4-cycle, DOHC 8-cylinder, V-block, Slanted at 90(cid:176) in (mm) 3.858 x 3.622 (98 x 92) cu in (cm3) 338.78 (5,552) 1(cid:150)8(cid:150)7(cid:150)3(cid:150)6(cid:150)5(cid:150)4(cid:150)2 No adjustment is necessary. Standard Model DILFR5A-11 FFV Model DILFR5A-11D in (mm) 0.043 (1.1) Timing chain Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X WHEELS AND TIRES DIMENSIONS AND WEIGHTS Wheels Tires Spare tire 18 x 8.0J 20 x 8.0J P265/70R18 P275/70R18 P275/60R20 Full size Overall length Short Bed Long Bed Overall width Overall height 2wd KC 4wd KC 2wd CC 4wd CC Front Track 18 inch tire (offroad package) 18 inch tire 20 inch tire Rear Track 18 inch tire (offroad package) 18 inch tire 20 inch tire Wheelbase Short Bed Long Bed Gross vehicle weight rating Gross axle weight rating Front Rear in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) in (mm) lb (kg) lb (kg) lb (kg) 224.6 (5,704) 244.3 (6,204) 79.6 (2,021) 75.1 (1,907) 76.6 (1,946) 75.4 (1,916) 76.9 (1,954) 67.9 (1,725) 67.9 (1,725) 68.1 (1,729) 67.9 (1,725) 67.9 (1,725) 68.1 (1,729) 139.8 (3,550) 159.4 (4,050) See the (cid:147)F.M.V.S.S./C. M.V.S.S. certification label(cid:148) on the center pil- lar between the driver(cid:146)s side front and side doors. Technical and consumer information 9-9 Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X VEHICLE IDENTIFICATION LTI0085 VEHICLE IDENTIFICATION NUMBER (VIN) PLATE The vehicle identification number (VIN) plate is attached as shown. This number is the identifica- tion for your vehicle and is used in the vehicle registration. LTI0086 VEHICLE IDENTIFICATION NUMBER (chassis number) The vehicle identification number is located as shown. WHEN TRAVELING OR REGISTERING YOUR VEHICLE IN ANOTHER COUNTRY When planning to drive your NISSAN ve- hicle in another country, you should first find out if the fuel available is suitable for your vehi- cle(cid:146)s engine. Using fuel with an octane rating that is too low may cause engine damage. All gasoline vehicles must be operated with unleaded gasoline. There- fore, avoid taking your vehicle to areas where appropriate fuel is not available. When transferring the registration of your vehicle to another country, state, province or district, it may be necessary to modify the vehicle to meet local laws and regulations. The laws and regulations for motor vehicle emis- sion control and safety standards vary according to the country, state, province or district; there- fore, vehicle specifications may differ. When any vehicle is to be taken into an- other country, state, province or district and registered, its modifications, transpor- tation, and registration are the responsibil- ity of the user. NISSAN is not responsible for any inconvenience that may result. 9-10 Technical and consumer information Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X WTI0095 WTI0099 WTI0189 ENGINE SERIAL NUMBER The number is stamped on the engine as shown. F.M.V.S.S./C.M.V.S.S. CERTIFICATION LABEL The Federal/Canadian Motor Vehicle Safety Standard (F.M.V.S.S./C.M.V.S.S.) certification la- bel is affixed as shown. This label contains valu- able vehicle information, such as: Gross Vehicle Weight Ratings (GVWR), Gross Axle Weight Rating (GAWR), month and year of manufacture, Vehicle Identification Number (VIN), etc. Review it carefully. EMISSION CONTROL INFORMATION LABEL The emission control tached to the underside of the hood as shown. information label is at- Technical and consumer information 9-11 Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X INSTALLING FRONT LICENSE PLATE WTI0100 TIRE AND LOADING INFORMATION LABEL The cold tire pressure is shown on the Tire and Loading Information label. The label is located as shown. WTI0188 AIR CONDITIONER SPECIFICATION LABEL The air conditioner specification label is affixed to the underside of the hood as shown. LTI0093 Use the following steps to mount the front license plate: 1. Make holes on the plastic finisher at the location mark (small dimple) using a 0.20 in (5 mm) drill. Apply light pressure to the drill. Install the license plate holder using the two screws provided with the holder. 2. Mount the license plate using two M6- 14mm bolts. License plate bolt tightening torque: 3.8 - 4.7 ft-lb (5.10 - 6.37 N•m) 9-12 Technical and consumer information Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X VEHICLE LOADING INFORMATION WARNING c It is extremely dangerous to ride in a cargo area inside a vehicle. In a collision, people riding in these areas are more likely to be seri- ously injured or killed. c Do not allow people to ride in any area of your vehicle that is not equipped with seats and seat belts. c Be sure everyone in your vehicle is in a seat and using a seat belt properly. TERMS It is important to familiarize yourself with the following terms before loading your vehicle: c Curb Weight (actual weight of your vehicle) - vehicle weight including: standard and optional equipment, flu- ids, emergency tools, and spare tire assembly. This weight does not in- clude passengers and cargo. c GVW (Gross Vehicle Weight) - curb weight plus the combined weight of passengers and cargo. c GVWR (Gross Vehicle Weight Rat- - maximum total combined ing) weight of the unloaded vehicle, pas- sengers, trailer tongue load and any other optional equipment. This information is lo- cated on the F.M.V.S.S./C.M.V.S.S. certification label. luggage, hitch, c GAWR (Gross Axle Weight Rating) - maximum weight (load) limit specified for the front or rear axle. This informa- tion the located F.M.V.S.S./C.M.V.S.S. certification label. on is c GCWR (Gross Combined Weight rating) - The maximum total weight rating of the vehicle, passengers, cargo, and trailer. limit specified of c Vehicle Capacity Weight, Load limit, Total load capacity - maximum total weight the load (passengers and cargo) for the ve- hicle. This is the maximum combined weight of occupants and cargo that can be loaded into the vehicle. If the vehicle is used to tow a trailer, the trailer tongue weight must be in- cluded as part of the cargo load. This information is located on the Tire and Loading Information label (if so equipped). c Cargo capacity - permissible weight of cargo, the subtracted weight of occupants from the load limit. VEHICLE LOAD CAPACITY Before driving a loaded vehicle, confirm that you do not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR) for your vehicle. Both the GVWR and GAWR are located on the F.M.V.S.S./C.M.V.S.S. certification label. See (cid:147)Measurement of Weights(cid:148) later in this section. Technical and consumer information 9-13 Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X (if label Information Do not exceed the load limit of your ve- hicle shown as (cid:147)The combined weight of occupants and cargo(cid:148) on the Tire and Loading so equipped). Do not exceed the number of occupants shown as (cid:147)Seating Capacity(cid:148) on the Tire and Loading Information label (if so equipped). To get (cid:147)the combined weight of occu- pants and cargo(cid:148), add the weight of all occupants, then add the total luggage weight. Examples are shown in the follow- ing illustration. 9-14 Technical and consumer information Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X Steps for determining correct load limit 1. Locate the statement (cid:147)The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs(cid:148) on your vehicle(cid:146)s placard. 2. Determine the combined weight of the driver and passengers that will be riding in your vehicle. 3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs. 4. The resulting figure equals the avail- able amount of cargo and luggage load capacity. For example, if the XXX amount equals 1400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of avail- able cargo and luggage load capac- ity is 650 lbs. (1400-750 (5 X 150) = 650 lbs) or (640-340 (5 X 70) = 300 kg.) Example LTI0152 Technical and consumer information 9-15 Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X c Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWRs. If you do, parts of your vehicle can break, tire damage could occur, or it can change the way your vehicle handles. This could result in loss of control and cause personal injury. 5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. If your vehicle will be towing a trailer, load from your trailer will be trans- ferred to your vehicle. Consult this manual to determine how this re- duces the available cargo and lug- gage load capacity of your vehicle. 6. Before driving a loaded vehicle, confirm that you do not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR) for your vehicle. See (cid:147)Measurement of Weights(cid:148) later in this section. Also check tires for proper inflation pres- sures. See the Tire and Loading Informa- tion label. 9-16 Technical and consumer information LTI0102 SECURING THE LOAD For your convenience, tie down hooks are placed at each corner of the truck box. These may be used to help secure cargo loaded into the truck box. WARNING c Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seatbacks. In a sudden stop or col- lision, unsecured cargo could cause personal injury. Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X LTI0107 Side channels 1. 2. Header channel 3. Channel sections 4. UTILI-TRACK(cid:153) CHANNEL SYSTEM (if so equipped) Floor channels Check the tightness of the tie-down cleat peri- odically during a trip to make sure the center bolt has not become loose. Install the tie-down cleat as follows: 1. Remove the channel protectors by sliding them out the back of the truck bed. Properly store the channel protectors. 2. Loosen the center bolt completely. WARNING c Properly install and tighten the tie- down cleats into the Utili-track(cid:153) chan- nel system. Also, do not attach any rope or straps directly to the channel. Failure to properly install the tie-down cleats or attaching ropes or straps directly to the channel can cause the cargo to become unsecured. In a sudden stop or colli- sion, unsecured cargo could cause per- sonal injury. c Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. In a sudden stop or collision, unsecured cargo could cause personal injury. The Utili-track(cid:153) channel system allows you to move tie-down clamps in the bed to the best location to secure a load. The tie-down cleats must be installed so the clamp is properly seated in the notches in the rail. If the tie-down cleat is not seated in the notches, it will not be flush with the rail and cannot be properly tightened. The bolt in the center of the cleat must be tightened hand tight (20 (cid:150) 40 inch pounds) Technical and consumer information 9-17 Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X 3. LTI0103 Insert the cleat into the channel perpendicu- lar to the channel as shown. Then rotate the cleat clockwise 90(cid:176) and slide it to the de- sired location. 9-18 Technical and consumer information LTI0104 4. Position the cleat so the nubs on the bottom fully seat into the channel detents. Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X 5. There should be no gap between the bottom of the cleat and the top of the channel. Tighten the center bolt hand tight (20- 40 inch pounds). WTI0124 Technical and consumer information 9-19 Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X LTI0106 CAUTION c Install only one cleat per section of channel. c Applying loads at angles to the cleats greater then 45(cid:176) or loads greater than 150 lbs. (header and floor channels) or 200 lbs. (side channels) may cause damage to the channel or bed. 9-20 Technical and consumer information Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X 1 correct installation, 2 incorrect installation WARNING Do not install accessories over the gap between the front and rear side channels. Doing this could affect the rear structure in certain rear impacts, which could result in serious injury. LTI0123 WTI0119 CAUTION Properly secure all cargo with ropes or straps to prevent it from sliding or shifting. Use the channel end stoppers to help se- cure items in the channels from sliding off the end of the truck bed. Channel end stoppers The channel end stoppers should be used to help prevent accessories installed in the channels from sliding or shifting off the end of the truck bed. They must be installed so they are properly seated in the detents in the channel. Technical and consumer information 9-21 Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X c Overloading not only can shorten the life of your vehicle and the tire, but can also cause unsafe vehicle handling and longer brak- ing distances. This may cause a premature tire failure which could result in a serious accident and personal injury. Failures caused by overloading are not covered vehicle(cid:146)s warranty. the by WARNING c Properly secure all cargo with ropes or straps to help prevent it from sliding or shifting. Do not place cargo higher than the seat- backs. In a sudden stop or colli- sion, unsecured cargo could cause personal injury. c Do not load your vehicle any heavier than the GVWR or the maximum front and rear GAWRs. If you do, parts of your vehicle can break, tire damage could oc- cur, or it can change the way your vehicle handles. This could result in loss of control and cause per- sonal injury. Install the channels end stoppers as follows: 1. Remove the channel protectors by sliding them out the back of the truck bed. Properly store the channel protectors. 2. Loosen the bolt on the center of the end stopper with the provided wrench and insert it into the channel. 3. Position the end stopper to the desired lo- cation on the channel so the nubs on the bottom of the end stopper fully seat into the channel detents. 4. Tighten the bolt on the center of the end stopper with the provided wrench. LOADING TIPS c The GVW must not exceed GVWR or GAWR as specified on the F.M.V.S.S./C.M.V.S.S. certification label. c Do not load the front and rear axle to the GAWR. Doing so will exceed the GVWR. 9-22 Technical and consumer information Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X TRUCK-CAMPER LOADING INFORMATION CREW CAB MODELS Crew Cab short wheel base models should not be used to carry a slide-in camper. KING CAB MODELS This information is provided for you to properly install a slide-in camper and is based on the National Highway Traffic Safety Administration regulations. It is recommended that, before in- stalling the camper, you carefully read the follow- ing information and ensure that the camper meets the specifications. This information may not apply to some Canada model vehicles. SPECIAL BODY VEHICLES Some vehicles are equipped with commercial or camper bodies. However, this Owner(cid:146)s Manual does not cover these options. For further infor- mation, please refer to the body manufacturer(cid:146)s instruction manual. WARNING Improper loading may be dangerous. If a load is too far back, it can affect handling characteristics. If a load is too far forward, the front axle may be overloaded. WTI0195 LOCATION FOR CENTER OF GRAVITY The illustration indicates the recommended cargo center of gravity location. King Cab short wheel base: L1 = 1115.7 mm (43.9 in) King Cab long wheel base: L1 = 1365.7 mm (53.8 in) Crew Cab long wheel base: L1 = 1215.7 mm (47.9 in) Technical and consumer information 9-23 Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X loads. Individual axle loads should not ex- ceed either of the gross axle weight rat- ings (GAWR). The total of the axle loads should not exceed the gross vehicle weight rating (GVWR). These ratings are given on the vehicle certification label. If weight ratings are exceeded, move or re- move items to bring all weights below the ratings. WARNING Overloading or improper loading can ad- versely affect vehicle handling, braking and performance and may lead to accidents. PAYLOAD WEIGHT CAPACITY The vehicle payload weight capacity shown on the Tire and Loading Information label, see (cid:147)Tire and Loading Information label(cid:148) in this section, indicates the maximum total weight of passen- gers, optional equipment (air conditioning, trailer hitch, etc) and cargo that your vehicle is designed to carry. Before driving a loaded vehicle, confirm that you do not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR) for your vehicle. See (cid:146)(cid:146)Vehicle Loading Information(cid:146)(cid:146) earlier in this section for details. Also check tires for proper inflation pressures. See the Tire and Loading Information label. MEASUREMENT OF WEIGHTS Secure loose items to prevent weight shifts that could affect the balance of your vehicle. When the vehicle is loaded, drive to a scale and weigh the front and the rear wheels separately to determine axle LTI0129 When the truck is used to carry a slide-in camper, the total cargo load of the truck consists of the camper manufacturer(cid:146)s weight figure, plus: c the weight of installed additional camper included in the camper equipment not manufacturer(cid:146)s weight figure, c the weight of camper cargo, c and the weight of occupants in the camper. The total cargo load should not exceed the truck(cid:146)s pay load weight rating and the camper(cid:146)s center of gravity should fall within the truck(cid:146)s recommended center of gravity location when installed. 9-24 Technical and consumer information Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X TOWING A TRAILER WARNING Overloading or improper loading of a trailer and its cargo can adversely affect vehicle handling, braking and perfor- mance and may lead to accidents. CAUTION c Do not tow a trailer or haul a heavy load for the first 500 miles (800 km). Your engine, axle or other parts could be damaged. c For the first 500 miles (800 km) that you tow a trailer, do not drive over 50 mph (80 km/h) and do not make starts at full throttle. This helps the engine and other parts of your vehicle wear in at the heavier loads. Your new vehicle was designed to be used pri- marily to carry passengers and cargo. Remember that towing a trailer places additional loads on your vehicle(cid:146)s engine, drive train, steering, brak- ing and other systems. A NISSAN Towing Guide (U.S. only) is available on the website at www.nissanusa.com. This guide includes information on trailer towing ca- pability and the special equipment required for proper towing. specified MAXIMUM LOAD LIMITS Maximum trailer loads Never allow the total trailer load to exceed the value (cid:147)Towing Load/Specification(cid:148) chart found later in this sec- tion. The total trailer load equals trailer weight plus its cargo weight. c When towing a trailer load of 3,500 lbs. (1587 kg) or more, trailers with a brake system MUST be used. the in The maximum Gross Combined Weight Rating (GCWR) should not exceed the value specified in the following (cid:147)Towing Load/Specification(cid:148) chart. LTI0161 The GCWR equals the combined weight of the towing vehicle (including passengers and cargo) plus the total trailer load. Towing loads greater than these or using improper towing equipment could adversely affect vehicle handling, braking and performance. The ability of your vehicle to tow a trailer is not only related to the maximum trailer loads, but also the places you plan to tow. Tow weights appro- priate for level highway driving may have to be reduced for low traction situations (for example, on slippery boat ramps). Technical and consumer information 9-25 Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X King pin load When using a 5th wheel hitch, keep the tongue load between 15 - 25 percent of the total trailer load within the maximum king pin load limits shown (cid:147)Towing Load/Specification(cid:148) chart. If the king pin load becomes excessive, rearrange cargo to allow for proper king pin load. following the in Temperature conditions can also affect towing. For example, towing a heavy trailer in high outside temperatures on graded roads can affect engine performance and cause overheating. The engine protection mode, which helps reduce the chance of engine damage, could activate and automati- cally decrease engine power. Vehicle speed may decrease under high load. Plan your trip carefully to account for trailer and vehicle load, weather and road conditions. WARNING Overheating can result in reduced engine power and vehicle speed. The reduced speed may be lower than other traffic, which could increase the chance of a col- lision. Be especially careful when driving. If the vehicle cannot maintain a safe driv- ing speed, pull to the side of the road in a safe area. Allow the engine to cool and return to normal operation. See (cid:147)If your vehicle overheats(cid:148) in the (cid:147)In case of emer- gency(cid:148) section of this manual. CAUTION Vehicle damage resulting from improper towing procedures is not covered by NISSAN warranties. 9-26 Technical and consumer information WTI0160 Tongue load When using a weight carrying or a weight distrib- uting hitch, keep the tongue load between 10 - 15 percent of the total trailer load or use the trailer tongue load specified by the trailer manu- facturer. The tongue load must be within the maximum tongue load limits shown in the follow- ing (cid:147)Towing Load/Specification(cid:148) chart. the tongue load becomes excessive, rearrange cargo to allow for proper tongue load. If Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X CA0036 Maximum Gross Vehicle Weight (GVW)/maximum Gross Axle Weight (GAW) The GVW of the towing vehicle must not exceed the Gross Vehicle Weight Rating (GVWR) shown on the F.M.V.S.S./C.M.V.S.S. certification label. The GVW equals the combined weight of the unloaded vehicle, passengers, luggage, hitch, trailer tongue load and any other optional equipment. In addition, front or rear GAW must not exceed the Gross Axle Weight Rating (GAWR) shown on the F.M.V.S.S./C.M.V.S.S. certification label. Towing capacities are calculated assuming a base vehicle with driver and any options required to achieve the rating. Additional passengers, cargo and/or optional equipment, such as the trailer hitch, will add weight to the vehicle and reduce your vehicle(cid:146)s maximum towing capacity and trailer tongue load. The vehicle and trailer need to be weighed to confirm the vehicle is within the GVWR, Front GAWR, Rear GAWR, Gross Combined Weight Rating (GCWR) and Towing capacity. All vehicle and trailer weights can be measured using platform type scales commonly found at truck stops, highway weigh stations, building supply centers or salvage yards. To determine the available payload capacity for tongue/king pin load, use the following proce- dure. 1. Locate the GVWR on the F.M.V.S.S./C.M.V.S.S. certification label. 2. Weigh your vehicle on the scale with all of the passengers and cargo that are normally in the vehicle when towing a trailer. 3. Subtract the actual vehicle weight from the GVWR. The remaining amount is the avail- able maximum tongue/king pin load. To determine the available towing capacity, use the following procedure. 1. Find the GCWR for your vehicle on the found 9Towing Load/Specification9 chart later in this section. 2. Subtract the actual vehicle weight from the GCWR. The remaining amount is the avail- able maximum towing capacity. To determine the Gross Trailer Weight, weigh your trailer on a scale with all equipment and cargo, that are normally in the trailer when it is towed. Make sure the Gross trailer weight is not more than the Gross Trailer Weight Rating shown on the trailer and is not more than the calculated available maximum towing capacity. Also weigh the front and rear axles on the scale to make sure the Front Gross Axle Weight and Rear Gross Axle Weight are not more than Front Gross Axle Weight and Rear Gross Axle Weight on the F.M.V.S.S./C.M.V.S.S. certification label. The cargo in the trailer and vehicle may need to be moved or removed to meet the specified rat- ings. Example: c Gross Vehicle Weight (GVW) as weighed on a scale - including passengers, cargo and hitch - 6,200 lb. (2812 kg). Technical and consumer information 9-27 Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X The available towing capacity may be less than the maximum towing capacity due to the passen- ger and cargo load in the vehicle. Remember to keep trailer tongue weight be- tween 10 - 15% of the trailer weight or within the trailer tongue load specification recommended by the trailer manufacturer. If the tongue load becomes excessive, rearrange the cargo to ob- tain the proper tongue load. Do not exceed the maximum tongue weight specification shown in the (cid:147)Towing load/specification(cid:148) chart even if the calculated available tongue weight is greater than 15%. If the calculated tongue weight is less than 10% , reduce the total trailer weight to match the available tongue weight. Always verify that available capacities are within the required ratings. c Gross Vehicle Weight Rating (GVWR) from F.M.V.S.S./C.M.V.S.S. certification label - 7,100 lb. (3221 kg). c Gross Combined Weight Rating (GCWR) from (cid:147)Towing Load/Specification9 chart - 15,100 lb. (6849 kg). c Maximum Trailer towing capacity from (cid:147)Tow- ing Load/Specification9 chart - 9,200 lb. (4173 kg). 7,100 lb. (3221 kg) (cid:150) 6,200 lb. (2812 kg) GVWR GVW = 900 lb. (408 kg) Available for tongue/ king pin weight 15,100 lb. (6849 kg) (cid:150) 6,200 lb. (2812 kg) GCWR GVW = 8,900 lb. (4036 kg) Capacity available for towing 900 lb. (408 kg) Available tongue weight / 8,900 lb. (4036 kg) Available capacity 10 % tongue weight 9-28 Technical and consumer information Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X TOWING LOAD/SPECIFICATION Towing load specification chart with tow package (cid:151) short wheel base XE KC SE 2WD LE XE CC SE LE 9,500 lb. (4309 kg) 9,500 lb. (4309 kg) 9,200 lb. (4173 kg) 9,400 lb. (4264 kg) 9,400 lb. (4264 kg) 9,200 lb. (4173 kg) KC OR 4WD LE XE 9,300 lb. (4218 kg) 9,200 lb. (4173 kg) 9,400 lb. (4264 kg) XE/SE 9,400 lb. (4264 kg) CC SE/OR 9,300 lb. (4218 kg) LE 9,100 lb. (4128 kg) Maximum Towing Capacity *1, *2, *3 Maximum Tongue load 950 lb. (431 kg) 950 lb. (431 kg) 920 lb. (417 kg) 940 lb. (426 kg) 940 lb. (426 kg) 920 lb. (417 kg) 940 lb. (426 kg) 930 lb. (422 kg) 920 lb. (417 kg) 940 lb. (426 kg) 930 lb. (422 kg) 910 lb. (413 kg) 1,425 lb. (646 kg) 1,425 lb. (646 kg) 1,380 lb. (626 kg) 1,410 lb. (640 kg) 1,410 lb. (640 kg) 1,380 lb. (626 kg) 1,410 lb. (640 kg) 1,395 lb (633 kg) 1,380 lb. (626 kg) 1,410 lb. (640 kg) 1,395 lb (633 kg) 1,365 lb. (619 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) *2, *3 Maximum King pin load Maximum Gross Combined Weight Rat- ing Technical and consumer information 9-29 Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X Towing load specification chart with tow package (cid:151) long wheel base XE KC SE 2WD LE XE CC SE LE XE KC SE LE 4WD 9,400 lb. (4264 kg) 9,400 lb. (4264 kg) 9,100 lb. (4128 kg) 9,300 lb. (4218 kg) 9,300 lb. (4218 kg) 9,100 lb. (4128 kg) 9,200 lb. (4173 kg) 9,100 lb. (4128 kg) 8,900 lb. (4037 kg) Maximum Towing Capacity *1, *2, *3 XE/SE 9,100 lb. (4128 kg) CC OR LE 9,000 lb. (4082 kg) 8,900 lb. (4037 kg) Maximum Tongue load 940 lb. (426 kg) 940 lb. (426 kg) 910 lb. (413 kg) 930 lb. (422 kg) 930 lb. (422 kg) 910 lb. (413 kg) 920 lb. (417 kg) 910 lb. (413 kg) 890 lb. (404 kg) 910 lb. (413 kg) 900 lb. (408 kg) 890 lb. (404 kg) 1,410 lb. (640 kg) 1,410 lb. (640 kg) 1,365 lb. (619 kg) 1,395 lb. (633 kg) 1,395 lb. (633 kg) 1,365 lb. (619 kg) 1,380 lb. (626 kg) 1,365 lb. (619 kg) 1,335 lb. (606 kg) 1,365 lb. (619 kg) 1,350 lb. (612 kg) 1,335 lb. (606 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) 15,100 lb. (6849 kg) *2, *3 Maximum King pin load Maximum Gross Combined Weight Rat- ing 9-30 Technical and consumer information Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X Towing load specification chart without tow package (cid:151) short wheel base XE KC SE 2WD LE XE CC SE LE XE KC SE 6,500 lb. (2948 kg) 7,400 lb. (3357 kg) 7,200 lb. (3266 kg) 6,500 lb. (2948 kg) 7,400 lb. (3357 kg) 7,100 lb. (3221 kg) 6,500 lb. (2948 kg) 7,400 lb. (3357 kg) 4WD LE/OR 7,200 lb. (3266 kg) XE 6,500 lb. (2948 kg) CC SE/OR 7,300 lb. (3311 kg) LE 7,000 lb. (3175 kg) Maximum Towing capacity*1, *2, *3 Maximum Tongue load 650 lb. (295 kg) 740 lb. (336 kg) 720 lb. (327 kg) 650 lb. (295 kg) 740 lb. (336 kg) 710 lb. (322 kg) 650 lb. (295 kg) 740 lb. (336 kg) 720 lb. (327 kg) 650 lb. (295 kg) 730 lb. (331 kg) 700 lb. (318 kg) 975 lb. (442 kg) 1,110 lb. (503 kg) 1,080 lb. (490 kg) 975 lb. (442 kg) 1,110 lb. (504 kg) 1,065 lb. (483 kg) 975 lb. (442 kg) 1,110 lb. (503 kg) 1,080 lb. (490 kg) 975 lb. (442 kg) 1,095 lb. (497 kg) 1,050 lb. (476 kg) 12,800 lb. (5806 kg) 12,800 lb. (5806 kg) 12,800 lb. (5806 kg) 12,800 lb. (5806 kg) 12,800 lb. (5806 kg) 12,800 lb. (5806 kg) 13,000 lb. (5897 kg) 13,000 lb. (5897 kg) 13,000 lb. (5897 kg) 13,000 lb. (5897 kg) 13,000 lb. (5897 kg) 13,000 lb. (5897 kg) *2, *3 Maximum King pin load Maximum Gross Combined Weight Rat- ing Technical and consumer information 9-31 Z REVIEW COPY—2009 Titan (tzw) Owners Manual—USA_English (nna) 02/19/08—tbrooks X Towing load specification chart without tow package (cid:151) long wheel base XE KC SE 2WD LE XE CC SE LE XE KC SE 4WD LE XE

Boost Classifieds - Car Advice, Reviews, Events & Classifieds

2009 Nissan Titan Owners Manual