Login- Download PDF Manual
-
iously injured or killed in a collision if the child restraint top tether strap is damaged.
Model "Z12-D" EDITED: 2009/ 1/ 28
. Do not allow cargo to contact the top tether strap when it is attached to the top tether anchor. Properly secure the cargo so it does not contact the top tether strap. Cargo that is not properly secured or that contacts the top tether strap may damage the top tether strap during a collision. Your child could be seriously injured or killed in a colli- sion if the child restraint top tether strap is damaged.
LUGGAGE HOOKS
SIC4141
WARNING
. Do not attach upper tether anchors to the luggage hooks. The child restraint will not be properly in- stalled. Your child could be injured or killed in a sudden stop or colli- sion.
. Always make sure that the luggage is properly secured. Use the suitable ropes and hooks.
. Unsecured luggage can become
Black plate (105,1)
dangerous in an accident or sudden stop.
CAUTION
Do not apply a total load of more than 7
lb (3 kg) *A or 22 lb (10 kg) *B to a single hook.Instruments and controls 2-35
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (106,1)
WINDOWS
POWER WINDOWS
WARNING
. Make sure that all passengers have their hands, etc. inside the vehicle while it is in motion and before closing the windows. Use the win- dow lock switch to prevent unex- pected use of the power windows.
. Do not leave children unattended inside the vehicle. They could un- knowingly activate switches or con- trols and become trapped in the window. Unattended children could become involved in serious acci- dents.
The power windows operate when the ignition switch is in the ON position, or for about 45
seconds after the ignition switch is placed in the OFF position. If the driver’s or front passenger’s door is opened during this period of about 45
seconds, power to the windows is canceled.Model "Z12-D" EDITED: 2009/ 1/ 28
Instrument panel
Rear door
SIC4142
SIC4143
The utility hooks can be attached to the holes as illustrated.
UTILITY HOOKS (if so equipped) Two removable utility hooks are supplied with your vehicle. The utility hooks can be attached to or removed from the holes on the instrument panel and the rear doors.
CAUTION
Do not apply a total load of more than 3
lb (1.5 kg) to a single hook.To remove the hook from the hole, pull it straight up. Do not twist or turn the hooks for installation or removal.
2-36 Instruments and controls
Black plate (107,1)
Push it in again to cancel.
SIC3507
Main power window switch (driver’s side) 1. Window lock button 2. Driver side window 3. Rear left passenger side window 4. 5. Rear right passenger side window To open or close the window, push down *A or pull up *B the switch and hold it. The main switch (driver side switches) will open or close all the windows.
Front passenger side window
Locking passengers’ windows When the lock button *C is pushed in, only the driver side window can be opened or closed.
SIC3508
Passenger side power window switch The passenger side switch will open or close only the corresponding window. To open or close the window, push down or pull up the switch and hold it.
Instruments and controls 2-37
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (108,1)
Auto-reverse function
1. Place the ignition switch in the ON position.
WARNING
There are some small distances imme- diately before the closed position which cannot be detected. Make sure that all passengers have their hands, etc., in- side the vehicle before closing the window.
If the control unit detects something caught in the window as it is closing, the window will be immediately lowered.
The auto reverse function can be activated when the window is closed by automatic operation when the ignition switch is in the ON position or for 45 seconds after the ignition switch is placed in the OFF position.
Depending on the environment or driving conditions, the auto reverse function may be activated if an impact or load similar to something being caught in the window occurs.
If the windows do not close automatically If the power window automatic function (closing only) does not operate properly, perform the following procedure to initialize the power window system.
SIC3509
Automatic operation The automatic operation is available for switch that has an
mark on its surface.
the
To fully open or close the window, completely push down or pull up the switch and release it; the switch need not be held. The window will automatically open or close all the way. To stop the window, just push or lift the switch in the opposite direction.
A light push or pull on the switch will cause the window to open or close until the switch is released.
2-38 Instruments and controls
2. Close the door.
3. Open the window completely by operating
the power window switch.
4. Pull the power window switch and hold it to close the window, and then hold the switch more than 3 seconds after the window is closed completely.
5. Release the power window switch. Operate the window by the automatic function to confirm the initialization is complete.
If the power window automatic function does not operate properly after performing the pro- cedure above, have your vehicle checked by a NISSAN dealer.
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (109,1)
INTERIOR LIGHTS
CAUTION
Do not use for extended periods of time with the engine stopped. This could result in a discharged battery.
SIC4166
SIC4167
MAP LIGHTS (if so equipped) Operate the map light switch to turn the map light on or off. *1 : ON position *2 : OFF position
MAP LIGHT CONTROL SWITCH (if so equipped) The map lights control switch has three posi- tions: ON *1 , OFF *2 and center *3 . ON position When the switch is in the ON position *1 , the map lights will illuminate.
OFF position When the switch is in the OFF position *2 , the map lights will not illuminate, regardless of the condition.
Center position When the switch is in the center position *3 , Instruments and controls 2-39
Model "Z12-D" EDITED: 2009/ 1/ 28
the map lights will illuminate under the following conditions:
ignition switch is placed in the OFF position (models with Intelligent Key system)
— remain on for about 15 seconds.
the key is removed from the ignition switch (models without Intelligent Key system)
— remain on for about 15 seconds.
doors are unlocked by pushing the UN- LOCK button (on the keyfob or Intelligent Key) or the request switch (In- telligent Key system equipped model), with the ignition switch in the LOCK position
— remain on for about 15 seconds.
any door is opened and then closed with the ignition switch in the LOCK position
— remain on for about 15 seconds.
any door is opened with the ignition switch in the ACC or ON position
— remain on while the door
is opened. When the door is closed, the lights go off.
The lights will turn off after 30 minutes when the lights remain illuminated to prevent the battery from becoming dis- charged.
2-40 Instruments and controls
SIC4148
CEILING LIGHT The ceiling light switch has three positions: ON *1 , center *2 and OFF *3 . ON position When the switch is in the ON position *1 , the ceiling light will illuminate.
Center position When the switch is in the center *2 , the ceiling light will following conditions:
position illuminate under the
ignition switch is placed in the OFF position (models with Intelligent Key system)
— remain on for about 15 seconds.
Black plate (110,1)
the key is removed from the ignition switch (models without Intelligent Key system)
— remain on for about 15 seconds.
doors are unlocked by pushing the UN- LOCK button (on the keyfob or Intelligent Key) or the request switch (In- telligent Key system equipped model), with the ignition switch in the LOCK position
— remain on for about 15 seconds.
any door is opened and then closed with the ignition switch in the LOCK position
— remain on for about 15 seconds.
any door is opened with the ignition switch in the ACC or ON position
— remain on while the door
is opened. When the door is closed, the lights go off.
The light will turn off after 30 minutes when the lights remain illuminated to prevent the battery from becoming dis- charged.
OFF position When the switch is in the OFF position *3 , the ceiling light will not illuminate, regardless of the condition.
Model "Z12-D" EDITED: 2009/ 1/ 28
CARGO LIGHT (if so equipped)
SIC4144
When the switch is in the ON position *1 , the light illuminates while the back door is opened. When the back door is closed, the light will turn off. When the switch is in the OFF position *2 , the light will turn off.
Black plate (111,1)
Instruments and controls 2-41
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (112,1)
MEMO
2-42 Instruments and controls
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (10,1)
3 Pre-driving checks and adjustments
Keys . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-2
NISSAN Vehicle Immobilizer System keys . . . . . . . . . . . . 3-2
Intelligent Keys (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . 3-3
Doors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Locking with key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-4
Locking with inside lock knob . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Locking with power door lock switch . . . . . . . . . . . . . . . . . . 3-5
Automatic door locks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-5
Child safety rear door lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-6
Remote keyless entry system (if so equipped) . . . . . . . . . . . 3-7
How to use remote keyless entry system . . . . . . . . . . . . . 3-8
Intelligent Key system (if so equipped) . . . . . . . . . . . . . . . . . . 3-10
Intelligent Key operating range . . . . . . . . . . . . . . . . . . . . . . . . 3-12
Door locks/unlocks precaution . . . . . . . . . . . . . . . . . . . . . . . . 3-12
Intelligent Key operation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-13
Battery saver system. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-14Warning lights and audible reminders . . . . . . . . . . . . . . . 3-14
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-15
How to use remote keyless entry function . . . . . . . . . . 3-17
Hood . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-21
Back door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-22
Bumpers and side sill extensions (Kro¯ m models) . . . . . 3-23
Fuel-filler door . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24
Opening the fuel-filler door. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24
Fuel-filler cap . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-24
Tilt steering column . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-25
Tilt operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26
Sun visors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26
Mirrors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26
Inside mirror. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-26
Outside mirrors. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-27Model "Z12-D" EDITED: 2009/ 1/ 28
KEYS
A key number plate is supplied with your keys. Record the key number and keep it in a safe place (such as your wallet), not in the vehicle. If you lose your keys, see a NISSAN dealer for duplicates by using the key number. NISSAN does not record any key numbers so it is very important to keep track of your key number plate.
A key number is only necessary when you have lost all keys and do not have one to duplicate from. If you still have a key, this key can be duplicated by a NISSAN dealer.
Black plate (114,1)
duplicate your existing key. As many as 5 keys can be used with one vehicle. You should bring all the registered keys that you have to a NISSAN dealer for registration. This is because the registration process will erase the memory of all key codes previously registered into the NISSAN Vehicle Immobilizer System. After the registration process, these components will only recognize keys coded into the NISSAN Vehicle Immobilizer System during registration. Any key that is not given to your dealer at the time of registration will no longer be able to start your vehicle.
SPA2405
CAUTION
Do not allow the NISSAN Vehicle Im- mobilizer System key, which contains an electrical transponder, to come in contact with salt water. This could cause the system to malfunction.
1. Master key (2 sets) 2. Key number plate NISSAN VEHICLE IMMOBILIZER SYS- TEM KEYS Your vehicle can only be driven with the master keys which are registered to the NISSAN Vehicle Immobilizer System components in your vehicle. These keys have a transponder chip in the key head.
Never leave these keys in the vehicle.
Additional or replacement keys:
If you still have a key, the key number is not necessary when you need extra NISSAN Vehicle Immobilizer System keys. Your dealer can
3-2 Pre-driving checks and adjustments
Model "Z12-D" EDITED: 2009/ 1/ 28
nents when registering new keys, be sure to take all Intelligent Keys that you have to the NISSAN dealer.
CAUTION
. Be sure to carry the Intelligent Key with you when driving. The Intelli- gent Key is a precision device with a built-in transmitter. To avoid dama- ging it, please note the following.
SPA2406
Intelligent Key (2 sets)
1. 2. Mechanical key (inside Intelligent Key) (2 sets) 3. Key number plate INTELLIGENT KEYS (if so equipped) Your vehicle can only be driven with the Intelligent Keys which are registered to your vehicle’s Intelligent Key system components and NISSAN Vehicle Immobilizer System compo- nents. As many as 4 Intelligent Keys can be registered and used with one vehicle. The new keys must be registered by a NISSAN dealer prior to use with the Intelligent Key system and NISSAN Vehicle Immobilizer System of your vehicle. Since the registration process requires erasing all memory in the Intelligent Key compo-
— The Intelligent Key is water resistant; however, wetting may damage the Intelligent Key. If the Intelligent Key gets wet, immediately wipe until it is com- pletely dry.
— Do not bend, drop or strike it
against another object.
— Do not place the Intelligent Key for an extended period in a place where temperatures ex- ceed 1408F (608C).
— Do not change or modify the
Intelligent Key.
— Do not use a magnet key holder. — Do not place the Intelligent Key near an electric appliance such as a television set, personal
Black plate (115,1)
computer or cellular phone.
— Do not allow the Intelligent Key to come into contact with water or salt water, and do not wash it in a washing machine. This could affect the system function. If an Intelligent Key is lost or stolen, NISSAN recommends erasing the ID code of that Intelligent Key. This will prevent the Intelligent Key from unauthorized use to unlock the vehicle. For information regarding the erasing procedure, please con- tact a NISSAN dealer.
Pre-driving checks and adjustments 3-3
Model "Z12-D" EDITED: 2009/ 1/ 28
DOORS
WARNING
. Always have the doors locked while driving. Along with the use of seat belts, this provides greater safety in the event of an accident by helping to prevent persons from being thrown from the vehicle. This also helps keep children and others from unintentionally opening the doors, and will help keep out intruders.
. Before opening any door, always look for and avoid oncoming traffic. . Do not leave children unattended inside the vehicle. They could un- knowingly activate switches or con- trols. Unattended children could become involved in serious acci- dents.
Black plate (116,1)
SPA2602
LOCKING WITH KEY The power door lock system allows you to lock or unlock all doors simultaneously.
Turning the driver’s door key cylinder to the front of the vehicle *1 will lock all doors and the back door.
Turning the driver’s door key cylinder once to the rear of the vehicle *2 will unlock the driver’s door. After returning the key to the neutral position, turning it to the rear again within 5 seconds will unlock all doors and the back door.
Model "Z12-D" EDITED: 2009/ 1/ 28
SPA2033
Mechanical key To remove the mechanical key, release the lock knob at the back of the Intelligent Key.
To install the mechanical key, firmly insert it into the Intelligent Key until the lock knob returns to the lock position.
Use the mechanical key to lock or unlock the doors. (See “DOORS” later in this section.)
CAUTION
Always carry the mechanical key in- stalled in the Intelligent Key.
3-4 Pre-driving checks and adjustments
Black plate (117,1)
Lockout protection Lockout protection function helps to prevent the keys from being accidentally locked inside the vehicle.
For models with Intelligent Key system: . When the power door lock switch (driver’s or front passenger’s) is moved to the lock position with the ignition switch placed in the ACC or ON position and any door open, all doors will lock and then unlock auto- matically.
. When the power door lock switch is moved to the lock position with the Intelligent Key left in the vehicle and any door open, all doors will unlock automatically and a chime will sound after the door is closed.
For models without Intelligent Key system:
When the power door lock switch is moved to the lock position with the key in the ignition switch and any door open, all doors will lock and then unlock automatically.
AUTOMATIC DOOR LOCKS . All doors will be locked automatically when the vehicle speed reaches 15 MPH (24
km/h).. All doors will be unlocked automatically when the ignition switch is placed in the Pre-driving checks and adjustments 3-5
Model "Z12-D" EDITED: 2009/ 1/ 28
SPA2603
SPA2300
LOCKING WITH INSIDE LOCK KNOB To lock the door without the key, move the inside lock knob to the lock position *1
then close the door.To unlock, move the inside lock knob to the unlock position *2 . When locking the door without a key, be sure not to leave the key inside the vehicle.
LOCKING WITH POWER DOOR LOCK SWITCH Operating the power door lock switch will lock or unlock all the doors. The switches are located on the driver’s and front passenger’s door armrests.
To lock the doors, push the power door lock switch to the lock position *1 with the driver’s or front passenger’s door open, then close the door.
When locking the door this way, be sure not to leave the key inside the vehicle.
To unlock the doors, push the power door lock switch to the unlock position *2 .
Black plate (118,1)
5. The ignition must be placed in the OFF and ON position again between each setting change.
SPA2604
CHILD SAFETY REAR DOOR LOCK Child safety rear door locks help prevent the rear doors from being opened accidentally, espe- cially when small children are in the vehicle.
When the levers are in the lock position *1 , the rear doors can be opened only from the outside.
To disengage, move the levers to the unlock position *2 .
Model "Z12-D" EDITED: 2009/ 1/ 28
OFF position (models with Intelligent Key system).
. All doors will be unlocked automatically when the key is removed from the ignition switch (models without Intelligent Key sys- tem).
The automatic lock and unlock functions can be deactivated or activated indepen- dently of each other.
To deactivate or activate the automatic lock or unlock system, perform the following procedure.
1. Close all doors.
2. Place the ignition switch in the ON position.
3. Do one of the following within 20 seconds of
performing step 2.
To change AUTO UNLOCK settings: push and hold the power door lock switch to the position (UNLOCK) for more than 5 seconds.
To change AUTO LOCK settings: push and hold the power door lock switch to the position (LOCK) for more than 5 seconds.
4. When activated,
the hazard indicator will flash twice. When deactivated, the hazard indicator will flash once.
3-6 Pre-driving checks and adjustments
REMOTE KEYLESS ENTRY SYSTEM (if so equipped)
It is possible to lock/unlock all doors (including the back door), and activate the panic alarm by using the keyfob from outside the vehicle. Before locking the doors, make sure the key is not left in the vehicle. The keyfob can operate at a distance of approximately 33 ft (10 m) from the vehicle. (The effective distance depends upon the conditions around the vehicle.) As many as 5 keyfobs can be used with one vehicle. For information concerning the pur- chase and use of additional keyfobs, contact a NISSAN dealer.
The keyfob will not function: . When the keyfob is not within the opera-
tional range.
. When the doors are open or not closed
securely.
. When the key is in the ignition switch. . When the battery is discharged.
WARNING
The remote keyless entry keyfob trans- mits radio waves when the buttons are pushed. The FAA advises that the radio waves may affect aircraft navigation and communication systems. Do not operate the keyfob while on an air-
Black plate (119,1)
plane. Make sure the buttons are not operated unintentionally when the unit is stored during a flight.
battery, see “KEY BATTERY REPLACEMENT” in the “8. Maintenance and do-it-yourself” section.
CAUTION
The following conditions or occur- rences will damage the keyfob. . Do not allow the keyfob to become
wet.
. Do not drop the keyfob. . Do not strike the keyfob sharply
against another object.
. Do not place the keyfob for an extended period in an area where temperatures exceed 1408F (608C). If a keyfob is lost or stolen, NISSAN recommends erasing the ID code of that keyfob. This will prevent the keyfob from unauthorized use to unlock the vehicle. For information regarding the erasing procedure, please contact a NISSAN dealer.
If the indicator light on the keyfob does not illuminate when pushing the buttons, the keyfob battery may be discharged.
For information regarding the replacement of a
Pre-driving checks and adjustments 3-7
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (120,1)
remains open.
position.
5. The hazard indicator flashes twice and the
horn chirps once. . When the LOCK
button is pushed with all doors locked, the hazard indicator flashes twice and the horn chirps once as a reminder that the doors are already locked. . Operate the door handles to confirm that the
doors have been securely locked.
Unlocking doors 1. Push the UNLOCK
button *2 on the
keyfob.
The driver’s door unlocks.
The hazard indicator flashes once if all doors are completely closed.
2. Push the UNLOCK
button again within
5 seconds. . All the doors and the back door unlock.
The hazard indicator flashes once if all doors are completely closed.
All doors will be locked automatically unless one of the following operations is performed within 1
minute of pushing the UNLOCK . Opening any door (including the back door). . Placing the ignition switch in the ONbutton.
SPA2416
*1 LOCK button *2 UNLOCK button *3 PANIC button HOW TO USE REMOTE KEYLESS ENTRY SYSTEM Locking doors 1. Remove the key from the ignition switch.
2. Close all the doors.
3. Push the LOCK
keyfob.
4. All the doors will lock.
button *1
on the
All of the doors will
lock when the LOCK button is pushed even though a door
3-8 Pre-driving checks and adjustments
Using panic alarm If you are near your vehicle and feel threatened, you may activate the alarm to call attention as follows:
1. Push the PANIC
button *3
keyfob for more than 1 second.on the
2. The theft warning alarm and headlights will
stay on for 25 seconds.
3. The panic alarm stops when:
It has run for 25 seconds, or
. Any of
the buttons on the keyfob is pushed. (Note: the PANIC button must be pushed for more than 1 second.)
Setting hazard indicator and horn mode This vehicle is set in hazard indicator and horn mode when you first receive the vehicle.
button *1
In hazard indicator and horn mode, when the LOCK is pushed, the hazard indicator flashes twice and the horn chirps once. button *2
When the UNLOCK is pushed, the hazard indicator flashes once.If the horn chirp is not necessary, you can switch to hazard indicator only mode by following the switching procedure.
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (121,1)
button is pushed,
In hazard indicator only mode, when the LOCK the hazard indicator flashes twice. When the UNLOCK button is pushed, neither the hazard indicator nor the horn operates.
Mode (Pushing the
or
button)
DOOR LOCK
DOOR UNLOCK
Hazard indicator and horn mode
Hazard indicator mode
HAZARD - twice HORN - once
HAZARD - twice
HAZARD - once HORN - none
HAZARD - none
Pre-driving checks and adjustments 3-9
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (122,1)
INTELLIGENT KEY SYSTEM (if so equipped)
WARNING
CAUTION
. Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should con- tact the electric medical equipment manufacturer for the possible influ- ences before use.
The Intelligent Key transmits radio waves when the buttons are pushed. The FAA advises that the radio waves may affect aircraft na- vigation and communication sys- t e m s . D o n o t o p e r a t e t h e Intelligent Key while on an airplane. Make sure the buttons are not operated unintentionally when the unit is stored during a flight.
The Intelligent Key system can operate all the door locks using the remote controller function or pushing the request switch on the vehicle without taking the key out from a pocket or purse. The operating environment and/or condi- tions may affect the Intelligent Key system operation.
Be sure to read the following before using the Intelligent Key system.
. Be sure to carry the Intelligent Key with you when operating the vehi- cle.
. Never leave the Intelligent Key in the vehicle when you leave the vehicle.
The Intelligent Key is always communicating with the vehicle as it receives radio waves. The Intelligent Key system transmits weak radio waves. Environmental conditions may interfere with the operation of the Intelligent Key system under the following operating conditions. . When operating near a location where strong radio waves are transmitted, such as a TV tower, power station and broad- casting station.
. When in possession of wireless equipment, such as a cellular phone, transceiver, and CB radio.
. When the Intelligent Key is in contact with or
covered by metallic materials.
. When any type of radio wave remote control
is used nearby.
. When the Intelligent Key is placed near an electric appliance such as a personal
Model "Z12-D" EDITED: 2009/ 1/ 28
Switching procedure:
To switch the hazard indicator and horn opera- tion, push the LOCK *1
and UNLOCK *2 buttons on the keyfob simultaneouslyfor more than 2 seconds. . When the hazard indicator mode is set, the
hazard indicator flashes 3 times.
. When the hazard indicator and horn mode is set, the hazard indicator flashes once and the horn chirps once.
3-10 Pre-driving checks and adjustments
Black plate (123,1)
computer.
Keys, contact a NISSAN dealer.
cellular phone.
. When the vehicle is parked near a parking
meter.
In such cases, correct the operating conditions before using the Intelligent Key function or use the mechanical key.
Although the life of the battery varies depending on the operating conditions, the battery’s life is approximately 2 years. the battery is dis- charged, replace it with a new one.
If
Since the Intelligent Key is continuously receiv- ing radio waves, if the key is left near equipment which transmits strong radio waves, such as signals from a TV and personal computer, the battery life may become shorter.
information regarding replacement of a For battery, see “KEY BATTERY REPLACEMENT” in the “8. Maintenance and do-it-yourself” section.
Because the steering wheel is locked electri- cally, unlocking the steering wheel with the ignition switch in the LOCK position is impos- sible when the vehicle battery is completely discharged. Always be careful that the vehicle battery is not completely discharged.
As many as 4 Intelligent Keys can be registered and used with one vehicle. For information about the purchase and use of additional Intelligent
CAUTION
. Do not allow the Intelligent Key, which contains electrical compo- nents, to come into contact with water or salt water. This could affect the system function.
. Do not drop the Intelligent Key. . Do not strike the Intelligent Key
sharply against another object.
. Do not change or modify the Intel-
ligent Key.
. Wetting may damage the Intelligent Key. If the Intelligent Key gets wet, immediately wipe until it is comple- tely dry.
. Do not place the Intelligent Key for an extended period in an area where temperatures exceed 1408F (608C). . Do not attach the Intelligent Key with a key holder that contains a magnet.
. Do not place the Intelligent Key near equipment that produces a mag- netic field, such as a TV, audio equipment, personal computers or
If an Intelligent Key is lost or stolen, NISSAN recommends erasing the ID code of that Intelligent Key from the vehicle. This may prevent the unauthorized use of the Intelligent Key to operate the vehicle. For information regarding the erasing procedure, contact a NISSAN deal- er.
The Intelligent Key function can be disabled. For information about disabling the Intelligent Key function, contact a NISSAN dealer.
Pre-driving checks and adjustments 3-11
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (124,1)
SPA2612
SPA2407
switches may not function.
When the Intelligent Key is within the operating range, it is possible for anyone who does not carry the Intelligent Key to push the request switch to lock/unlock the doors including the back door.
INTELLIGENT KEY OPERATING RANGE The Intelligent Key functions can only be used when the Intelligent Key is within the specified operating range from the request switch *1 . When the Intelligent Key battery is discharged or strong radio waves are present near the operat- ing location, the Intelligent Key system’s operat- ing range becomes narrower, and the Intelligent Key may not function properly.
The operating range is within 31.50 in (80 cm) from each request switch *1 . If the Intelligent Key is too close to the door glass, handle or the request 3-12 Pre-driving checks and adjustments
rear bumper,
DOOR LOCKS/UNLOCKS PRECAU- TION . Do not push the door handle request switch with the Intelligent Key held in your hand as illustrated. The close distance to the door handle will cause the Intelligent Key system to have difficulty recognizing that the In- telligent Key is outside the vehicle.
. After locking with the door handle request switch, verify the doors are securely locked by testing them.
To prevent the Intelligent Key from being left inside the vehicle, make sure you carry the key with you and then lock the doors.
Model "Z12-D" EDITED: 2009/ 1/ 28
. Do not pull the door handle before pushing the door handle request switch. The door will be unlocked but will not open. Release the door handle once and pull it again to open the door.
Black plate (125,1)
SPA2408
SPA2606
INTELLIGENT KEY OPERATION You can lock or unlock the doors without taking the key out from your pocket or bag.
When you carry the Intelligent Key with you, you can lock or unlock all doors by pushing the door handle request switch (driver’s or front passen- ger’s) *A or back door request switch *B within the range of operation.
When you lock or unlock the doors, the hazard indicator will flash and the horn (or the outside chime) will sound as a confirmation. For details, see “Setting hazard indicator and horn mode” later in this section.
Pre-driving checks and adjustments 3-13
Model "Z12-D" EDITED: 2009/ 1/ 28
SPA2605
Locking doors 1. Place the ignition switch in the OFF position
and carry the Intelligent Key with you.*1
side chime sounds once. The corresponding door or the back door will unlock.
3. Push the request switch again within 1
2. Close all the doors.*2
3. Push the door handle request switch (dri- ver’s or front passenger’s) *A or the back door request switch *B while carrying the Intelligent Key with you.*3
4. All the doors and the back door will lock.
5. The hazard indicator flashes twice and the
outside chime sounds twice.
*1: Doors will lock with the request switch while the ignition switch is in the ACC or ON position.
*2: Doors will not lock with the request switch
while any door is open.
*3: Doors will not lock with the request switch when the Intelligent Key is left inside the vehicle. However, when an Intelligent Key is inside the vehicle, doors can be locked with another registered Intelligent Key.
Unlocking doors 1. Push the door handle request switch *A or the back door request switch *B while carrying the Intelligent Key with you.
2. The hazard indicator flashes once and out-
3-14 Pre-driving checks and adjustments
minute.
4. The hazard indicator flashes once and out- side chime sounds once again. All the doors and the back door will unlock.
All doors will be locked automatically unless one of the following operations is performed within 1
minute after pushing the request switch while the doors are locked. . Opening any door. . Pushing the ignition switch.During this 1-minute time period, if the UNLOCK button on the Intelligent Key is pushed, all doors will be locked automatically after another 1 minute.
BATTERY SAVER SYSTEM When all the following conditions are met for 60
minutes, the battery saver system will cut off the power supply to prevent battery discharge.The ignition switch is in the ACC position, and
. All doors are closed, and
The selector lever is in the P (Park) position.
Black plate (126,1)
WARNING LIGHTS AND AUDIBLE REMINDERS the vehicle from moving To help prevent unexpectedly by erroneous operation of the Intelligent Key listed on the following chart or to help prevent the vehicle from being stolen, chime or beep sounds inside and outside the vehicle and a warning light illuminates or blinks.
When a chime or beep sounds or the warning light illuminates or blinks, be sure to check the vehicle and Intelligent Key.
in See “TROUBLESHOOTING GUIDE” later this section and “WARNING/INDICATOR LIGHTS AND AUDIBLE REMINDERS” in the “2. Instruments and controls” section.
Intelligent Key system warning light:
P position selecting warning light:
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (127,1)
TROUBLESHOOTING GUIDE
Symptom
Possible cause
Action to take
When pushing the ignition switch to stop the engine
The P position selecting warning light in the meter illuminates and the inside warning chime sounds continuously.
The selector lever is not in the P (Park) position.
Shift the selector lever to the P (Park) position.
When shifting the selector lever to the P (Park) position.
When opening the driver’s door to get out of the vehicle
When closing the door after get- ting out of the vehicle
The inside warning chime sounds continuously.
The inside warning chime sounds continuously.
The Intelligent Key system warning light in the meter blinks in yellow, and the outside chime sounds 3 times and the inside warning chime sounds for a few seconds.
The ignition switch is in the ACC or ON position.
Push the ignition switch to the OFF posi- tion.
The ignition switch is in the ACC position.
Push the ignition switch to the OFF posi- tion.
The ignition switch is in the ACC or ON position.
Push the ignition switch to the OFF posi- tion.
The P position selecting warning light in the meter illuminates and the outside chime sounds continuously.
The ignition switch is in the ACC or OFF position and the selector lever is not in the P (Park) position.
Move the selector lever to the P (Park) position and push the ignition switch to the OFF position.
When closing the door with the inside lock knob turned to LOCK
The outside chime sounds for a few seconds and all the doors unlock.
The outside chime sounds for a few seconds.
The Intelligent Key is inside the vehicle. Carry the Intelligent Key with you.
The Intelligent Key is inside the vehicle. Carry the Intelligent Key with you.
A door is not closed securely.
Close the door securely.
When pushing the request switch or the LOCK button on the Intelligent Key to lock the door
When pushing the ignition switch to start the engine
The Intelligent Key system warning light in the meter blinks in green.
The battery charge is low.
Replace the battery with a new one. (See “KEY BATTERY REPLACEMENT” in the “8. Maintenance and do-it-yourself” section.)
The Intelligent Key system warning light in the meter blinks in yellow and the inside warning chime sounds for a few seconds.
The Intelligent Key is not in the vehicle. Carry the Intelligent Key with you.
Pre-driving checks and adjustments 3-15
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (128,1)
Symptom
Possible cause
Action to take
When pushing the ignition switch
The Intelligent Key system warning light in the meter illuminates in yellow.
It warns of a malfunction with the electrical steering lock system or the Intelligent Key system.
Contact a NISSAN dealer.
3-16 Pre-driving checks and adjustments
Model "Z12-D" EDITED: 2009/ 1/ 28
HOW TO USE REMOTE KEYLESS ENTRY FUNCTION
WARNING
. Radio waves could adversely affect electric medical equipment. Those who use a pacemaker should con- tact the electric medical equipment manufacturer for the possible influ- ences before use.
The Intelligent Key transmits radio waves when the buttons are pushed. The FAA advises that the radio waves may affect aircraft na- vigation and communication sys- t e m s . D o n o t o p e r a t e t h e Intelligent Key while on an airplane. Make sure the buttons are not operated unintentionally when the unit is stored during a flight.
CAUTION
. Do not allow the Intelligent Key, which contains electrical compo- nents, to come into contact with water or salt water. This could affect the system function.
. Do not drop the Intelligent Key. . Do not strike the Intelligent Key
sharply against another object.
. Do not change or modify the Intel-
ligent Key.
. Wetting may damage the Intelligent Key. If the Intelligent Key gets wet, immediately wipe until it is comple- tely dry.
. Do not place the Intelligent Key for an extended period in an area where temperatures exceed 1408F (608C). . Do not attach the Intelligent Key with a key holder that contains a magnet.
. Do not place the Intelligent Key near equipment that produces a mag- netic field, such as a TV, audio equipment, personal computers or cellular phone.
The remote keyless entry function can operate all door locks using the remote keyless entry function of the Intelligent Key. The remote keyless entry function can operate at a distance of approximately 33 ft (10 m) from the vehicle. (The operating distance depends upon the conditions around the vehicle.)
Black plate (129,1)
The remote keyless entry function will not operate: . When the Intelligent Key is not within the
operational range.
. When the doors are open or not closed
securely.
. When the Intelligent Key battery is dis-
charged.
The remote keyless entry function can also operate the vehicle alarm.
Pre-driving checks and adjustments 3-17
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (130,1)
Intelligent Key.
. Pushing the ignition switch.
5. All the doors and the back door will lock.
6. The hazard indicator flashes twice and the
horn chirps once.
*1: Doors will lock with the Intelligent Key while the ignition switch is in the ACC or ON position.
*2: Doors will not lock with the Intelligent Key
while any door is open.
Operate the door handles to confirm that the doors have been securely locked.
Unlocking doors 1. Push the UNLOCK Intelligent Key once.
button *2 on the
2. The hazard indicator
flashes once. The
driver’s door will unlock.
3. Push the UNLOCK
button again within
1 minute.
4. The hazard indicator flashes once. All the
doors and the back door will unlock.
All doors will be locked automatically unless one of the following operations is performed within 1
minute after pushing the UNLOCK button while the doors are locked. . Opening any door (including the back door).SPA2252
button
button
*1 LOCK *2 UNLOCK *3 PANIC When you lock or unlock the doors, the hazard indicator will flash and the horn will sound as a confirmation. For details, see “Setting hazard indicator and horn mode” later in this section.
button
Locking doors 1. Place the ignition switch in the OFF position
and carry the Intelligent Key with you.*1
2. Carry the Intelligent Key with you.
3. Close all the doors.*2
4. Push the LOCK
button *1
on the
3-18 Pre-driving checks and adjustments
During this 1-minute time period, if the UNLOCK button is pushed, all doors will be locked
automatically after another 1 minute.
Using panic alarm If you are near your vehicle and feel threatened, you may activate the alarm to call attention as follows:
1. Push the PANIC
button *3
on the
Intelligent Key for more than 1 second.
2. The theft warning alarm and headlights will
stay on for 25 seconds.
3. The panic alarm stops when:
It has run for 25 seconds, or
. Any of the buttons on the Intelligent Key is pushed. the PANIC button must be pushed for more than 1
second.)(Note:
Setting hazard indicator and horn mode This vehicle is set in hazard indicator and horn mode when you first receive the vehicle.
button *1
In hazard indicator and horn mode, when the LOCK is pushed, the hazard indicator flashes twice and the horn chirps once. button *2
When the UNLOCK is pushed, the hazard indicator flashes once.Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (131,1)
If horns are not necessary, the system can be switched to the hazard indicator mode.
In hazard indicator mode, when the LOCK button is pushed, the hazard indicator flashes twice. When the UNLOCK button is pushed, neither the hazard indicator nor the horn operates.
Hazard indicator and horn mode:
Operation
DOOR LOCK
DOOR UNLOCK
Pushing door handle request switch
or back door request switch
HAZARD - twice OUTSIDE CHIME - twice
HAZARD - once OUTSIDE CHIME - once
Pushing
or
button
HAZARD - twice HORN - once
HAZARD - once HORN - none
Hazard indicator mode:
Operation
DOOR LOCK
DOOR UNLOCK
Pushing door handle request switch
or back door request switch
HAZARD - twice OUTSIDE CHIME - none
HAZARD - none OUTSIDE CHIME - none
Pushing
or
button
HAZARD - twice HORN - none
HAZARD - none HORN - none
Pre-driving checks and adjustments 3-19
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (132,1)
Switching procedure:
To switch the hazard indicator and horn (chime) operation, push the LOCK *1
and UN- LOCK *2
buttons on the Intelligent Key simultaneously for more than 2 seconds. . When the hazard indicator mode is set, thehazard indicator flashes 3 times.
. When the hazard indicator and horn mode is set, the hazard indicator flashes once and the horn chirps once.
3-20 Pre-driving checks and adjustments
Model "Z12-D" EDITED: 2009/ 1/ 28
HOOD
WARNING
. Make sure the hood is completely closed and latched before driving. Failure to do so could cause the hood to fly open and result in an accident.
If you see steam or smoke coming from the engine compartment, to avoid injury do not open the hood.
Black plate (133,1)
SPA2607
be hot immediately after the engine has been stopped.
When closing the hood:
1. Return the support
rod to its original
position.
2. Slowly move the hood down to latch the
lock.
3. Push the hood down to lock the hood
Pre-driving checks and adjustments 3-21
Model "Z12-D" EDITED: 2009/ 1/ 28
When opening the hood: 1. Pull the hood release handle *1
located below the instrument panel; the hood will then spring up slightly. 2. Locate the lever *2
in between the hood and grille, and push the lever sideways with your fingertips.
3. Raise the hood *3 . 4. Remove the support rod *4
and insert it into the slot *5 .Hold the coated part *A when removing or resetting the support rod. Avoid direct contact with the metal parts, as they may
from the hood
securely into place.
Black plate (134,1)
BACK DOOR
WARNING
. Always be sure the back door has been closed securely to prevent it from opening while driving.
. Do not drive with the back door open. This could allow dangerous exhaust gases to be drawn into the vehicle. See “EXHAUST GAS (car- bon monoxide)” in the “5. Starting and driving” section of this manual. . Make sure that all passengers have their hands, etc. inside the vehicle before closing the back door.
3-22 Pre-driving checks and adjustments
SPA2608
SPA2609
CAUTION
Do not step or place heavy objects on the back door opening (over the rear combination lights). Doing so could cause damage to the rear combination lights and/or personal injury.
To open the back door, unlock it and pull the handle.
The back door can be unlocked by:
— pushing the unlock button
on the keyfob or the Intelligent Key (if so equipped) twice.
— pushing the back door request switch (if so
equipped).
— pushing the power door lock switch to the
unlock position.
— inserting the key into the driver’s door key cylinder and turning it to the rear of the vehicle twice.
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (135,1)
BUMPERS AND SIDE SILL EXTENSIONS (Kro¯ m models)
The Kro¯ m models have unique front and rear bumpers and side sill extensions. These parts are close to the ground and may be damaged if they contact objects such as curbs, parking blocks, etc.
CAUTION
Reduce vehicle speed to decrease the possibility of damaging these parts when: . driving on bumpy or rutted roads
entering or exiting parking garages and driveways
. driving over speed bumps.
SPA2623
SPA2624
CAUTION
The approach and departure angles are small. Reduce vehicle speed when the vehicle approaches or leaves a steep hill. Otherwise, the front and rear bum- pers may contact the road surface and be damaged.
Pre-driving checks and adjustments 3-23
Model "Z12-D" EDITED: 2009/ 1/ 28
FUEL-FILLER DOOR
SPA2336
SPA2610
OPENING THE FUEL-FILLER DOOR To open the fuel-filler door, pull the release handle located below the instrument panel. To lock, close the fuel-filler door securely.
3-24 Pre-driving checks and adjustments
FUEL-FILLER CAP The fuel-filler cap is a ratcheting type. Turn the cap counterclockwise *1
to remove. To tighten, turn the cap clockwise *2 until ratcheting clicks are heard. Put the fuel-filler cap on the cap holder *A while refueling.WARNING
. Gasoline is extremely flammable and highly explosive under certain conditions. You could be burned or seriously injured if it is misused or
Black plate (136,1)
mishandled. Always stop engine and do not smoke or allow open flames or sparks near the vehicle when refueling.
. Do not attempt to top off the fuel tank after the fuel pump nozzle shuts off automatically. Continued refueling may cause fuel overflow, resulting in fuel spray and possibly a fire.
. Use only an original equipment type fuel-filler cap as a replacement. It has a built-in safety valve needed for proper operation of the fuel system and emission control sys- tem. An incorrect cap can result in a serious malfunction and possible injury. It could also cause the mal- function indicator light to come on.
. Never pour fuel
into the throttle body to attempt to start your vehi- cle.
. Do not fill a portable fuel container in the vehicle or trailer. Static elec- tricity can cause an explosion of flammable liquid, vapor or gas in any vehicle or trailer. To reduce the risk of serious injury or death when
Model "Z12-D" EDITED: 2009/ 1/ 28
filling portable fuel containers:
— Always place the container on
the ground when filling.
— Do not use electronic devices
when filling.
— Keep the pump nozzle in contact with the container while you are filling it.
— Use only approved portable fuel containers for flammable liquid.
CAUTION
If fuel is spilled on the vehicle body, flush it away with water to avoid paint damage.
Insert the cap straight into the fuel- filler tube, then tighten until the fuel-filler cap clicks. Failure to tight- en the fuel-filler cap properly may malfunction indicator cause the light (MIL) to illuminate. If the light illuminates because the fuel- filler cap is loose or missing, tighten or install the cap and continue to light drive the vehicle. The should turn off after a few driving light does not turn trips. If the
Black plate (137,1)
off after a few driving trips, have the vehicle inspected by a NISSAN deal- er.
For additional information, see “Malfunction Indicator Light (MIL)” in the “2. Instruments and controls” section.
TILT STEERING COLUMN
WARNING
Do not adjust the steering wheel while driving. You could lose control of your vehicle and cause an accident.
Pre-driving checks and adjustments 3-25
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (138,1)
SUN VISORS
MIRRORS
SPA2611
and adjust the to the desired
SPA2447
INSIDE MIRROR Adjust the angle of desired position.
the inside mirror to the
TILT OPERATION Push the lock lever down *1
steering wheel up or down *2
position. Pull the lock lever up *3
steering wheel in place.securely to lock the
SIC2872
1. To block out glare from the front, swing
down the sun visor *1 .
2. To block glare from the side, remove the sun visor from the center mount and swing it to the side *2 .
3-26 Pre-driving checks and adjustments
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (139,1)
The outside mirror will operate only when the ignition switch is in the ACC or ON position. Move the switch right *1 or left *2
to select the right or left side mirror, then adjust *3 using the control switch.Defrosting outside mirrors (if so equipped) The outside mirrors will be heated when the rear window defroster switch is operated. (See “REAR WINDOW AND OUTSIDE MIRROR DEFROSTER SWITCH” in the “2. Instruments and controls” section.)
Pre-driving checks and adjustments 3-27
Model "Z12-D" EDITED: 2009/ 1/ 28
SPA2143
SPA2214
Manual anti-glare type The night position *1 will reduce glare from the headlights of vehicles behind you at night. Use the day position *2 when driving in daylight hours.
WARNING
Use the night position only when ne- cessary, because it reduces rear view clarity.
OUTSIDE MIRRORS
WARNING
Objects viewed in the outside mirror on the passenger side are closer than they appear. Be careful when moving to the right. Using only this mirror could cause an accident. Use the inside mirror or glance over your shoulder to properly judge distances to other objects.
Adjusting outside mirrors The outside mirror control switch is located at the lower part of the instrument panel.
Black plate (140,1)
SPA1829
Foldable outside mirrors Fold the outside mirror by pushing it toward the rear of the vehicle.
3-28 Pre-driving checks and adjustments
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (141,1)
MEMO
Pre-driving checks and adjustments 3-29
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (142,1)
MEMO
3-30 Pre-driving checks and adjustments
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (13,1)
4 Heater, air conditioner, audio and phone
systems
Ventilators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Center ventilators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Side ventilators. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Heater and air conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2
Manual air conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-3
Automatic air conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-6
Operating tips . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
In-cabin microfilter. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-8
Servicing air conditioner . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Audio system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
Audio operation precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-9
FM-AM radio with Compact Disc (CD) player . . . . . 4-17FM-AM-SAT radio with Compact Disc (CD) player . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-21
CD care and cleaning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-27
Steering wheel switch for audio control (if so equipped) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-28
Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-29
Car phone or CB radio. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-31
Bluetooth® Hands-Free Phone System with NISSAN voice recognition (if so equipped) . . . . . . . . . . . . 4-31
Using system . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-33
Speaker Adaptation (SA) mode . . . . . . . . . . . . . . . . . . . . . . . 4-42
Troubleshooting guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-45Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (144,1)
VENTILATORS
HEATER AND AIR CONDITIONER
WARNING
The air conditioner cooling function operates only when the engine is running.
. Do not leave children or adults who would normally require the support of others alone in your vehicle. Pets should not be left alone either. On hot, sunny days, temperatures in a closed vehicle could quickly become high enough to cause severe or possibly fatal injuries to people or animals.
. Do not use the recirculation mode for long periods as it may cause the interior air to become stale and the windows to fog up.
Start the engine and operate the heater and the air conditioner system.
SAA2343
SAA2344
CENTER VENTILATORS Open or close, and adjust the air flow direction of ventilators as illustrated.
SIDE VENTILATORS Adjust the air flow direction of ventilators as illustrated.
This symbol indicates that the vents are closed.
This symbol indicates that the vents are open.
4-2 Heater, air conditioner, audio and phone systems
Model "Z12-D" EDITED: 2009/ 1/ 28
Black plate (145,1)
Air flow control:
Turn the air flow control dial to change the air flow mode.
— Air
flows from the center and side
ventilators.
— Air
flows from the center and side
ventilators and foot outlets.
— Air flows mainly from the foot outlets.
— Air flows from the defroster and foot
outlets.
SAA2345
— Air
flows mainly from the defroster
outlets.
. With air conditioner system: When the
or position is selected, the air condi- tioner will automatically turn on. This will dehumidify the air and help to defog the windows. The A/C indicator light will illumi- nate when the air conditioner automatically turns on. The air conditioner and A/C indicator flow control modes until the A/C button is pressed or the fan control dial is turned to off.
remain on in all
light will
. When the
or
position is selected,
