Login- Download PDF Manual
-
Activating/deactivating Bluetooth link Bluetooth is not permitted everywhere. Comply with all safety guidelines and regulations. 1. "Telephone" 2. Open "Options". 3. "Bluetooth®"
4. To perform other operations on the mobile phone, refer to the Owner's Manual for the mobile phone: e.g. search for and connect Bluetooth device or a new device. The Bluetooth name of the vehicle appears on the mobile phone display.
5. Select the Bluetooth name of the vehicle on
the mobile phone display.
6. The onboard computer or the mobile phone will prompt you to enter the same Bluetooth passkey.
Pairing and connecting
Only pair the mobile phone when the vehicle is stopped; otherwise, inattention
may lead to endangerment of passengers or other road users.< 1. "Telephone" 2. "Bluetooth® (phone)" 3. "Add new phone"
The Bluetooth name of the vehicle is dis- played.
Enter the passkey and confirm. or Compare the control number on the vehicle display with the control number on the mobile phone display. Confirm the control number in the mobile phone and in the vehi- cle. "OK"
7. Select the functions that are to be used for
the mobile phone.
8. "OK" 9. Move the MINI joystick to the left. If pairing was successful, the mobile phone appears at the top of the list of mobile phones. If the pairing was not successful: What to do if…, refer to page 160.
Following the initial pairing > The mobile phone is detected/connected in
the vehicle within a short period of time when the engine is running or radio readi- ness is switched on.
159
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG COMMUNICATIONS
Hands-free device Bluetooth
> After identification, phone book entries are imported from the mobile phone and/or SIM card of the telephone, depending on the telephone.
> Four mobile phones can be paired. > Specific settings may be necessary in some
mobile phones, e.g. authorization or a secure connection, refer to the Owner's Manual for the mobile phone.
Connecting a particular mobile phone 1. "Telephone" 2. "Bluetooth® (phone)"
All paired mobile phones are listed.
3. Select the mobile phone to be connected.
Unpairing mobile phone 1. "Telephone" 2. "Bluetooth® (phone)"
All paired mobile phones are listed.
3. Highlight the mobile phone to be unpaired. 4. Open "Options". 5. "Remove phone from list"
What to do if… For information on suitable mobile phones, refer to page 158. The mobile phone could not be paired or con- nected. > Is Bluetooth activated in the vehicle and in the mobile phone? Activate Bluetooth in the vehicle and in the mobile phone.
> Do the Bluetooth passkeys on the mobile phone and the vehicle match? Enter the same passkey on the mobile phone and via the onboard computer.
> Is the passkey input taking longer than
30 seconds? Repeat the pairing procedure. > Are too many Bluetooth devices connected to the mobile phone? If so, delete the con- nections with other devices on the mobile phone.
> Is the mobile phone in power economy
mode or does it only have a small amount of battery charge remaining? Charge the mobile phone using a charging cable.
> Depending on the mobile phone, it may only
be possible to connect one device to the vehicle. Unpair the connected device from the vehicle and only pair and connect one device.
> Is the mobile phone no longer responding?
Switch the mobile phone off and back on again. Repeat the pairing procedure.
Is the mobile phone no longer responding? > Switch the mobile phone off and back on
again. Repeat the pairing procedure.
> Is the ambient temperature too high or too low? Do not subject your mobile phone to extreme ambient temperatures.
Phone book entries are not displayed, not all of them are displayed, or they are displayed incompletely. > The transfer of phone book entries has not
yet completed.
160
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG Hands-free device Bluetooth
COMMUNICATIONS
> It is possible that only the phone book
entries of the mobile phone or the SIM card are transferred.
> It may not be possible to display phone book
entries with special characters.
> The number of phone book entries to be
stored is too high.
> Is the amount of data for the contact too large, e.g., because of stored information such as addresses? Reduce the number of data entries.
The telephone connection quality is low. > Depending on the mobile phone, it is possi- ble to adjust the strength of the Bluetooth signal.
> Place mobile phone in the area of the center
console.
If you have gone through all items in the list and still cannot activate the desired function please contact the Hotline or your MINI dealer.
Operation
Adjusting volume
Turn the knob until the desired volume is reached. The setting is stored for the remote control cur- rently in use.
Incoming call
Receiving calls If the number of the caller is stored in the phone book and is transmitted by the network, then the name and number of the contact are dis- played; otherwise, only the number is displayed. If a contact is assigned more than one phone number, then only the name of the caller is transmitted.
Accepting a call Press the or
button on the steering wheel
"Accept"
Rejecting a call
"Reject"
The caller is redirected to the mailbox if it has been activated.
button on the steering wheel
Ending a call Press the or 1. "Telephone" 2. "End call"
161
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG COMMUNICATIONS
Hands-free device Bluetooth
Entering phone numbers
3.
"Hold"
The existing call is put on hold.
Dialing a number 1. "Telephone" 2. "Dial number" 3. Select the digits individually. 4. Select the
symbol.
4. Dial the new phone number or select it from
a list. "Return" The conversion that was on hold is continued.
Switching between two calls, toggling Active call: highlighted. The call on hold is identified with: "on hold...". Select the hold.
symbol to switch to the call on
Establishing a conference call Two calls can be connected to a single tele- phone conference call. 1. Establish two calls. 2.
"Conference call"
Both calls are always ended when a conference call is terminated. If one call is terminated by another party, the other call can be continued.
It is also possible to enter phone numbers by voice, page 176.
Calls with multiple parties
General information It is possible to switch between two calls and to connect two calls to form a conference call. These functions must be supported by the mobile phone and by the service provider.
Accepting a call while speaking to another party This function may have to be activated by the service provider and the mobile phone may need to be adjusted for this. When a second call comes in during an ongoing call, a call-waiting signal sounds.
"Accept"
The call is accepted and the existing call is put on hold.
Establishing a second call Establish another call during an active call. 1. "Telephone" 2. "Active calls"
162
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG Hands-free device Bluetooth
COMMUNICATIONS
Keypad dialing Use keypad dialing to gain access to network services or to control devices, e.g. to remotely access an answering machine. This requires the DTMF code. 1. "Telephone" 2. Select contact from a list or
"Dial number"
3.
"Keypad dialing"
4. Enter the DTMF code via the onboard com-
puter.
Calling a contact 1. Select the desired contact.
Select the symbol. Contact with one phone number. The connection is estab- lished.
2. Select the
symbol. Contact with more than one phone number. Select phone number, the connection is established. Call not possible, the mobile phone has no
reception or network.
Editing a contact Changing entries in the "Contacts" menu. If a contact is changed, the changes are not stored in the mobile phone. A copy of the entry is stored in the vehicle. 1. Highlight the contact. 2. Open "Options". 3. "Edit entry" The contact can be edited.
For a conference call in progress, DTMF dialing is not possible.
Redialing
Phone book
Displays The phone book accesses the contacts of the telephone and shows all contacts for which a phone number is entered. The entries can be selected to make a call. 1. "Telephone" 2. "Phone book" A symbol indicates the storage location of the contacts, refer to page 165.
General information The list of dialed numbers in the telephone are transferred to the vehicle, depending on the mobile phone. The last 20 phone numbers dialed are displayed. The sorting of the phone numbers depends on the mobile phone.
Selecting the number using the onboard computer 1. "Telephone" 2. "Redial"
163
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG COMMUNICATIONS
Hands-free device Bluetooth
3. Select the desired entry and phone number,
if necessary.
The connection is established.
Calling a number from the list Select an entry. The connection is established.
Deleting a single entry or all entries Deleting entries depends upon the mobile phone. 1. Highlight the entry. 2. Open "Options". 3. "Delete entry" or "Delete list".
Deleting a single entry or all entries Deleting entries depends upon the mobile phone. 1. Highlight the entry. 2. Open "Options". 3. "Delete entry" or "Delete list".
Saving an entry in the contacts 1. Highlight the entry. 2. Open "Options". 3. "Store as new contact" or "Add to existing
Saving an entry in the contacts 1. Highlight the entry. 2. Open "Options". 3. "Store as new contact" or "Add to existing
contact".
contact".
4. Select the type of number: "Home", "Busi-
4. Select the type of number: "Home", "Busi-
ness", "Mobile" or "Other".
5. Complete the entries if necessary. 6. "Store contact" if necessary
ness", "Mobile" or "Other".
5. Complete the entries if necessary. 6. "Store contact" if necessary
Received calls
Hands-free system
Displaying calls The list of received calls in the telephone is transferred into the vehicle, depending on the mobile phone. The last 20 calls received are dis- played. The sorting and displaying of phone numbers depends on the mobile phone. 1. "Telephone" 2. "Received calls"
General information Calls being conducted using the hands-free sys- tem can be continued using the mobile phone and vice versa.
From the mobile phone to the hands- free system Calls that have been initiated from outside the Bluetooth range of the vehicle can be continued using the hands-free system if the ignition is switched on. Depending on the mobile phone, the call is automatically switched to hands-free mode. If the switch does not occur automatically, then follow the instructions that appear on the dis- play of the mobile phone, also refer to the Owner's Manual for the mobile phone.
164
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG Hands-free device Bluetooth
COMMUNICATIONS
From hands-free system to mobile phone Calls being conducted using the hands-free sys- tem can also be continued using the mobile phone if so desired, depending on the mobile phone. At this point, follow the instructions that appear on the display of the mobile phone, also refer to the Owner's Manual for the mobile phone.
Contacts
General information Contacts can be created and edited. The addresses can be used as destinations for navi- gation.
5.
Input text, refer to page 20. When equipped with a navigation system: Enter address. It is only possible to enter addresses that are contained in the naviga- tion data stored in the vehicle. This ensures that route guidance is possible for all addresses.
6. "Store" if necessary 7. "Store contact in vehicle"
Defining a home address It is possible to store a home address. It is listed at the beginning of the contacts. 1. "Home" 2. Create a contact. 3. "Store contact in vehicle"
New contact 1. "Contacts" 2. "New contact"
My contacts
General information Listing all contacts from the vehicle.
Displaying contacts 1. "Contacts" 2. "My contacts"
3.
If input boxes are already filled with previous entries: "Delete input fields"
4. To fill in the entry fields: Select the symbol
next to the entry field.
All contacts are listed in alphabetical order. Depending on the number of contacts, an A-Z search is offered.
165
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG COMMUNICATIONS
Hands-free device Bluetooth
Checking the address as a destination An address that is to be used in route guidance must correspond to the navigation data stored in the vehicle. The address can be checked to ensure this. 1. Select the desired contact and highlight the
address.
2. Open "Options". 3. "Check as destination" 4. Correct and store the address, if necessary.
Selecting name sorting Names can be displayed in different orders. 1. "My contacts" 2. Open "Options". 3. "Display: last, first name" or "Display: first,
last name"
Depending on how the contacts were stored in the mobile phone, the sorting of names can dif- fer from the sorting selected.
Deleting contacts 1. "My contacts" 2. Highlight the contact. 3. Open "Options". 4. "Delete contact" or "Delete all contacts".
A symbol indicates the storage location of the contacts:
Symbol
Storage location
No symbol
In the vehicle; the address has not been checked as a destination.
In the vehicle; the address has been checked as a desti- nation.
Mobile phone
Editing a contact 1. Select the desired contact. 2. "Edit contact"
3. Change the entry. 4. Move the MINI joystick to the left. 5. "Yes" If a contact that comes from the mobile phone is edited, the changes are not stored on the mobile phone. A copy of the entry is stored in the vehi- cle, and only this copy is displayed. Under cer- tain conditions, an identical contact entry is gen- erated.
Selecting a contact as a destination 1. Select the desired contact. 2. Select address. 3. "Start guidance" or "Add as another destina-
tion"
166
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG Mobile phone preparation Bluetooth
COMMUNICATIONS
Mobile phone preparation Bluetooth
Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems.
Overview
The concept Mobile phones or other external devices, e.g. audio players, can be connected to the vehicle via Bluetooth. Bluetooth® is a registered trademark of Blue- tooth® SIG, Inc. After being paired once, when the ignition is switched on, these devices are automatically detected as soon as they are present in the vehi- cle and can be controlled via the onboard com- puter, the buttons on the steering wheel, and by voice. Depending on whether they are functioning as a telephone and/or as an audio source, external devices can be used via the vehicle. The tele- phone functions will be described below. Oper- ation of audio functions, refer to page 150. It may be necessary for some functions to be activated by the mobile phone provider.
Only make entries when traffic conditions permit. Do not hold the mobile phone in your hand while you are driving; use the hands- free system instead. If you do not observe this precaution, your being distracted can endanger vehicle occupants and other road users.<
Snap-in adapter The snap-in adapter, refer to page 178, makes it possible to: > Accommodate the mobile phone. > Recharge its battery. > Connect it to an external antenna of the
vehicle. This assures a better network connection and constant sound quality.
A mobile phone that is connected to the vehicle should not be operated via the mobile phone keypad; otherwise, malfunctions may occur.
Suitable mobile phones For precise information as to which mobile phones and external devices with Bluetooth interfaces are supported by the mobile phone preparation package, go to www.mini.com/con- nectivity. With a certain software version, these suitable mobile phones support the vehicle functions described below. With other mobile phones or software versions, malfunctions may occur. It is possible to perform a software update, refer to page 153.
Displaying vehicle identification number and software part number Checking which mobile phones are supported by the mobile phone preparation requires the vehicle identification number and software part number. The software version of the mobile phone may also be required. 1. "Telephone" 2. Open "Options". 3. "Bluetooth® info" 4. "Display system information"
167
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG COMMUNICATIONS
Mobile phone preparation Bluetooth
> Bluetooth presets in the mobile phone are required, e.g. connection not confirmed or visible, refer to Owner's Manual for the mobile phone.
> If necessary, deactivate the audio connec-
tion, refer to page 169.
> A number with at least 4 and at most
16 digits has been established as the Blue- tooth passkey. Only required once for pair- ing.
> Ignition switched on.
Activating/deactivating Bluetooth link Bluetooth is not permitted everywhere. Comply with all safety guidelines and regulations. 1. "Telephone" 2. Open "Options". 3. "Bluetooth®"
Activating/deactivating additional functions To use these functions in the vehicle, activate them before pairing. For information on suitable mobile phones that support this function, refer to page 167. 1. "Telephone" 2. "Bluetooth® (phone)" 3. Open "Options". 4. "Configure Bluetooth®" 5. Select desired additional function.
Notes Do not expose your mobile phone to extreme ambient conditions, for example, very high tem- peratures; otherwise, functions on your mobile phone may not work. Follow the operating instructions for your mobile phone.
Pairing/unpairing mobile phone
Overview > Using a mobile phone as a telephone. > Using the mobile phone as an auxiliary
phone.
> Using a mobile phone as an audio source. > Using an audio device as an audio source,
refer to page 150.
Functions supported by the mobile phone and audio device are displayed as symbols during the pairing. White symbol: function active. Gray symbol: Function inactive.
Symbol
Function
Telephone
Auxiliary phone
Audio source
Up to four external devices can be paired. Two devices can be connected to the vehicle at a time and used for different functions. The phone can be used to perform all of the following phone functions.
Requirements > Suitable mobile phone, refer to page 167. > Mobile phone operational. > Bluetooth activated in vehicle, refer to
page 168, and in the mobile phone.
168
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG Mobile phone preparation Bluetooth
COMMUNICATIONS
Bluetooth audio Use a mobile phone as a telephone and as an audio device in the vehicle. "Bluetooth® audio" To use a mobile phone exclusively as a tele- phone in the vehicle, deactivate the function and reconnect the mobile phone.
Office Contacts, appointments, tasks, notes, text mes- sages, and e-mails are imported from the mobile phone into the vehicle. "Office"
Auxiliary phone Another mobile phone can be used as an auxil- iary phone. "Additional telephone" Incoming calls to the auxiliary phone can be accepted, refer to page 172. Missed calls to the auxiliary phone are shown in the Control Dis- play.
Pairing and connecting
Only pair the mobile phone when the vehicle is stopped; otherwise, inattention
may lead to endangerment of passengers or other road users.< 1. "Telephone" 2. "Bluetooth® (phone)" 3. "Add new phone"
The Bluetooth name of the vehicle is dis- played.
4. To perform other operations on the mobile phone, refer to the Owner's Manual for the mobile phone: e.g. search for and connect Bluetooth device or a new device. The Bluetooth name of the vehicle appears on the mobile phone display.
5. Select the Bluetooth name of the vehicle on
the mobile phone display.
6. The onboard computer or the mobile phone will prompt you to enter the same Bluetooth passkey.
Enter the passkey and confirm. or Compare the control number on the vehicle display with the control number on the mobile phone display. Confirm the control number in the mobile phone and in the vehi- cle. "OK"
7. Select the functions that are to be used for
the mobile phone.
8. "OK" 9. Move the MINI joystick to the left.
169
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG COMMUNICATIONS
Mobile phone preparation Bluetooth
If pairing was successful, the mobile phone appears at the top of the list of mobile phones. If the pairing was not successful: What to do if…, refer to page 171.
Following the initial pairing > The mobile phone is detected/connected in
the vehicle within a short period of time when the engine is running or radio readi- ness is switched on.
> After identification, phone book entries are imported from the mobile phone and/or SIM card of the telephone, depending on the telephone.
> Specific settings may be necessary in some
mobile phones, e.g. authorization or a secure connection, refer to the Owner's Manual for the mobile phone.
Connecting a particular mobile phone 1. "Telephone" 2. "Bluetooth® (phone)"
All paired mobile phones are listed.
3. Select the mobile phone to be connected.
The assigned functions before the unpairing of the mobile phone are assigned to the mobile phone when it is reconnected. If a mobile phone is already connected, then these functions are deactivated if necessary.
Device options Device options in devices that are paired and connected can be activated or deactivated.
170
Configuring device 1. "Telephone" 2. "Bluetooth® (phone)" 3. Highlight the device to be configured. 4. Open "Options". 5. "Configure phone"
6. Activate/deactivate functions. At least one
function must be selected. > "Telephone" > "Additional telephone" > "Audio"
7. "OK" If a device is assigned a function, this may deac- tivate the function in an already connected device and cause the other device to be unpaired.
Exchanging the telephone and auxiliary phone If the telephone and auxiliary phone are con- nected to the vehicle, the function can be swapped between the two devices. 1. "Telephone" 2. "Bluetooth® (phone)" 3. "Swap phone/addit. phone"
Using the mobile phone as an audio source Using the audio-capable mobile phone as an audio source. Activate Bluetooth audio, refer to page 169.
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG Mobile phone preparation Bluetooth
COMMUNICATIONS
Activate and connect the mobile phone in vehi- cle, refer to page 169. The mobile phone is used as an audio source if no other device is connected as an audio source. If a device is already connected as an audio source: 1. Activate and connect the mobile phone in
vehicle, refer to page 169.
2. "Use for audio"
The mobile phone is connected as an audio source. The previous audio source is no longer connected to the vehicle.
Unpairing device 1. "Telephone" 2. "Bluetooth® (phone)"
All paired mobile phones are listed. 3. Highlight the device to be unpaired. 4. Open "Options". 5. "Remove phone from list"
What to do if… For information on suitable mobile phones, refer to page 167. The mobile phone could not be paired or con- nected. > Is Bluetooth activated in the vehicle and in the mobile phone? Activate Bluetooth in the vehicle and in the mobile phone.
> Do the Bluetooth passkeys on the mobile phone and the vehicle match? Enter the same passkey on the mobile phone and via the onboard computer.
> Is the passkey input taking longer than
30 seconds? Repeat the pairing procedure. > Are too many Bluetooth devices connected to the mobile phone? If so, delete the con- nections with other devices on the mobile phone.
> Is the audio connection activated? Deacti-
vate the audio connection.
> Is the mobile phone in power economy
mode or does it only have a small amount of battery charge remaining? Charge the mobile phone in the snap-in adapter or via a charging cable.
> Depending on the mobile phone, it may only
be possible to connect one device to the vehicle. Unpair the connected device from the vehicle and only pair and connect one device.
> Telephone functions not possible. > Is the mobile phone paired as an auxiliary phone and is the auxiliary phone function deactivated? Activate the function.
> Outgoing call not possible? Connect the
mobile phone as a telephone.
Is the mobile phone no longer responding? > Switch the mobile phone off and back on
again. Repeat the pairing procedure.
> Is the ambient temperature too high or too low? Do not subject your mobile phone to extreme ambient temperatures.
Phone book entries are not displayed, not all of them are displayed, or they are displayed incompletely. > The transfer of phone book entries has not
yet completed.
> It is possible that only the phone book
entries of the mobile phone or the SIM card are transferred.
> It may not be possible to display phone book
entries with special characters.
> The number of phone book entries to be
stored is too high.
171
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG COMMUNICATIONS
Mobile phone preparation Bluetooth
Adjustments are only possible during a call and must be carried out separately for each phone. When the telephone is unpaired, this deletes the settings. 1. "Settings" 2. "Tone" 3. "Volume settings" 4. To select the desired setting:
"Microphone" or "Loudspeak."
5. To adjust: Turn the MINI joystick. 6. To store: Press the MINI joystick.
Incoming call
Receiving calls If the number of the caller is stored in the phone book and is transmitted by the network, then the name and number of the contact are dis- played; otherwise, only the number is displayed. If a contact is assigned more than one phone number, then only the name of the caller is transmitted. With calls to the auxiliary phone, only the num- ber is displayed if it is transmitted by the net- work. An incoming call on a phone will be rejected automatically when a call is active on the other phone.
Accepting a call Press the or
button on the steering wheel
"Accept"
> The data volume of the phone book entry is
too great, e.g. due to additionally stored information such as notes? Reduce the data volume.
> Is the mobile phone connected as an audio
source or auxiliary phone? The mobile phone must be connected as a telephone.
The telephone connection quality is low. > Depending on the mobile phone, it is possi- ble to adjust the strength of the Bluetooth signal.
> Insert the mobile phone into the snap-in
adapter or place it in the vicinity of the cen- ter console.
> Adjust the volume of the microphone and
speaker separately.
If you have gone through all items in the list and still cannot activate the desired function please contact the Hotline or your MINI dealer.
Operation
Adjusting volume
Turn the knob until the desired volume is reached. The setting is stored for the remote control cur- rently in use. The vehicle automatically adjusts the volume of the microphone on the mobile phone and the volume of the person on the phone with you. Depending on the mobile phone, it may be nec- essary to adjust the volumes.
172
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG Mobile phone preparation Bluetooth
COMMUNICATIONS
Rejecting a call
"Reject"
The caller is redirected to the mailbox if it has been activated.
button on the steering wheel
Ending a call Press the or 1. "Telephone" "End call" 2.
Entering phone numbers
Dialing a number 1. "Telephone" 2. "Dial number" 3. Select the digits individually. 4. Select the
symbol.
It is also possible to enter phone numbers by voice.
Calls with multiple parties
General information It is possible to switch between two calls and to connect two calls to form a conference call. These functions must be supported by the mobile phone and by the service provider.
Accepting a call while speaking to another party This function may have to be activated by the service provider and the mobile phone may need to be adjusted for this. When a second call comes in during an ongoing call, a call-waiting signal sounds.
"Accept"
The call is accepted and the existing call is put on hold.
Establishing a second call Establish another call during an active call. 1. "Telephone" 2. "Active calls" 3.
"Hold"
The existing call is put on hold.
4. Dial the new phone number or select it from
a list.
Switching between two calls, toggling Active call: highlighted. The call on hold is identified with: "on hold...". Select the hold.
symbol to switch to the call on
173
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG COMMUNICATIONS
Mobile phone preparation Bluetooth
Establishing a conference call Two calls can be connected to a single tele- phone conference call. 1. Establish two calls. 2.
"Conference call"
1. "Telephone" 2. Select contact from a list or
"Dial number"
3.
"Keypad dialing"
Both calls are always ended when a conference call is terminated. If one call is terminated by another party, the other call can be continued.
puter.
Phone book
4. Enter the DTMF code via the onboard com-
Muting the microphone The microphone can be muted in active calls. 1. "Telephone" 2. "Active calls" 3.
"Microphone mute"
Displays The phone book accesses the contacts of the telephone and shows all contacts for which a phone number is entered. The entries can be selected to make a call. 1. "Telephone" 2. "Phone book" A symbol indicates the storage location of the contacts, refer to page 181.
The muted microphone is automatically acti- vated: > If a new call is made. > When switching between callers on hold.
Keypad dialing Use keypad dialing to gain access to network services or to control devices, e.g. to remotely access an answering machine. This requires the DTMF code.
174
Calling a contact 1. Select the desired contact.
Select the symbol. Contact with one phone number. The connection is estab- lished.
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG Mobile phone preparation Bluetooth
COMMUNICATIONS
2. Select the
symbol. Contact with more than one phone number. Select phone number, the connection is established. Call not possible, the mobile phone has no
reception or network.
Editing a contact Changing entries in the "Contacts" menu. If a contact is changed, the changes are not stored in the mobile phone. A copy of the entry is stored in the vehicle. 1. Highlight the contact. 2. Open "Options". 3. "Edit entry" The contact can be edited.
Redialing
General information The list of dialed numbers in the telephone are transferred to the vehicle, depending on the mobile phone. The last 20 phone numbers dialed are displayed. The sorting of the phone numbers depends on the mobile phone.
Selecting the number using the onboard computer 1. "Telephone" 2. "Redial"
Deleting a single entry or all entries Deleting entries depends upon the mobile phone. 1. Highlight the entry. 2. Open "Options". 3. "Delete entry" or "Delete list".
Saving an entry in the contacts 1. Highlight the entry. 2. Open "Options". 3. "Store as new contact" or "Add to existing
contact".
4. Select the type of number: "Home", "Busi-
ness", "Mobile" or "Other".
5. Complete the entries if necessary. 6. "Store contact" if necessary
Received calls
Displaying calls The list of received calls in the telephone is transferred into the vehicle, depending on the mobile phone. The last 20 calls received are dis- played. The sorting and displaying of phone numbers depends on the mobile phone. 1. "Telephone" 2. "Received calls"
3. Select the desired entry and phone number,
if necessary.
The connection is established.
Calling a number from the list Select an entry. The connection is established.
175
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG COMMUNICATIONS
Mobile phone preparation Bluetooth
At this point, follow the instructions that appear on the display of the mobile phone, also refer to the Owner's Manual for the mobile phone.
Operation by voice Equipped with voice activation system: Opera- tion, refer to page 21. For the list with the short commands, refer to page 232, does not apply for this type of voice operation. Equipped without voice activation system: Depending upon the equipment, the mobile phone can be voice-operated as described below.
The concept > The mobile phone can be operated without
removing your hand from the steering wheel.
> In many cases, the entry process is sup- ported by means of announcements or questions.
> {...} Verbal instructions to use with the voice
operation system.
> {{...}} Identifies the answers generated by
the voice operation system.
Voice commands
Activating voice activation system 1. Briefly press the
button on the steering
wheel.
2. Say the command.
Finishing voice input Press the briefly or
button on the steering wheel
{Cancel}.
Deleting a single entry or all entries Deleting entries depends upon the mobile phone. 1. Highlight the entry. 2. Open "Options". 3. "Delete entry" or "Delete list".
Saving an entry in the contacts 1. Highlight the entry. 2. Open "Options". 3. "Store as new contact" or "Add to existing
contact".
4. Select the type of number: "Home", "Busi-
ness", "Mobile" or "Other".
5. Complete the entries if necessary. 6. "Store contact" if necessary
Hands-free system
General information Calls being conducted using the hands-free sys- tem can be continued using the mobile phone and vice versa.
From the mobile phone to the hands- free system Calls that have been initiated from outside the Bluetooth range of the vehicle can be continued using the hands-free system if the ignition is switched on. Depending on the mobile phone, the call is automatically switched to hands-free mode. If the switch does not occur automatically, then follow the instructions that appear on the dis- play of the mobile phone, also refer to the Owner's Manual for the mobile phone.
From hands-free system to mobile phone Calls being conducted using the hands-free sys- tem can also be continued using the mobile phone if so desired, depending on the mobile phone.
176
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG Mobile phone preparation Bluetooth
COMMUNICATIONS
Possible commands
Having possible commands read aloud Press the
button on the steering wheel.
{Help}.
Possible commands are read aloud. Each digit can be spoken individually or com- bined into a sequence to accelerate the entry process.
Using alternative commands There are often a number of commands to run a function, e.g.:
{Dial name} or {Name}.
Example: Dialing phone numbers 1. Briefly press the
button on the steering
wheel. {Dial number}
2. 3. The system replies: {{Please say the num-
ber.}}
4. For example: {123 456 7890} 5. The system replies: {{123 456 7890. Con-
6.
tinue?}} {Dial} System replies: {{Dialing number.}}
Calling
Dialing phone numbers
{Dial number}.
1. 2. Say the phone number. 3.
{Dial}.
The connection to the desired subscriber is established.
Correcting phone number Digit sequences can be deleted after the system has repeated the digits. {Correct number}.
The command can be repeated as often as nec- essary.
Deleting phone number
{Delete}.
All digits entered up to this point are deleted.
Redialing
{Redial}.
Voice phone book Depending on how your vehicle is equipped, it may be necessary to create your own voice phone book. The entries must be entered by voice and are independent of the mobile phone's memory. Up to 50 entries can be set up.
Storing the entry
{Save name}.
1. 2. Say the name aloud. Do not exceed a speaking duration of about 2 seconds.
3. Say the phone number after being prompted to do so by the system. {Save}.
4.
Deleting the entry
{Delete name}.
1. 2. Say the name when prompted. 3. Confirm prompt with {Yes}.
Deleting all entries
1.
{Delete phonebook}. The dialog for deleting phone book is opened.
2. Confirm prompt with {Yes}. 3. Confirm repeated prompt with {Yes}.
177
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG COMMUNICATIONS
Mobile phone preparation Bluetooth
Reading and selecting the entries
Snap-in adapter
General information Detailed information on snap-in adapters that compatibly support mobile phone functions can be found at your MINI dealer. Do not expose your mobile phone to extreme ambient conditions, for example, very high tem- peratures; otherwise, functions on your mobile phone may not work. Follow the operating instructions for your mobile phone.
Installation location In the center armrest.
Inserting snap-in adapter 1. Press the button and remove the cover.
2.
Insert the snap-in adapter at the front, arrow 1, and press downward, arrow 2, until it clicks into place.
1.
2.
{Read phonebook}. The dialog for reading phone book is opened. {Dial number} when the desired entry is read aloud.
Selecting an entry {Dial name}.
1. 2. Say the name when prompted. 3. Confirm prompt with {Yes}.
Adjusting volume Turn knob during announcement. > The volume remains the same, even if the volume of other audio sources is changed.
> The volume is stored for the remote control
currently in use.
Notes Do not use the voice operation system to initiate an emergency call. In stressful situations, the voice and vocal pitch can change. This can unnecessarily delay the establishment of a tele- phone connection.
Ambient conditions > Say the commands, numbers and letters
smoothly and with normal volume, empha- sis and speed.
> Always say the commands in the language of the system. The language for voice oper- ation is preset and can not be changed via the Control Display.
> Keep doors, windows, glass sunroof/pan-
oramic sunroof, or convertible top closed to avoid noise interference.
> Avoid ambient noise in the vehicle while
speaking.
178
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG Mobile phone preparation Bluetooth
COMMUNICATIONS
Inserting mobile phone
1. Depending on the mobile phone, it may be necessary to remove the protective cap of the antenna connector and from the USB connection of the mobile phone.
2. Push the mobile phone with the buttons fac-
ing upward toward the electrical connec- tions and press down until it engages.
Removing mobile phone
Press the button and remove the mobile phone.
179
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG > Time zones, time, and date, refer to
page 64, are correctly adjusted on the Con- trol Display and on the mobile phone in order, for example, to correctly display appointments.
Updating Every time that the mobile phone is connected to the vehicle, data are updated. Appointments, tasks, notes and reminders can be updated sep- arately. 1. "Office" 2. "Current office", "Calendar", "Tasks",
"Notes" or "Reminders"
3. Open "Options". 4. "Update data"
Data from the mobile phone are again trans- ferred to the vehicle.
Current office The number of unread messages and active tasks as well as upcoming appointments are dis- played. 1. "Office" 2. "Current office" 3. Select the desired entry to display details.
COMMUNICATIONS
Office
Office
Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems.
Overview
General information Contacts, appointments, tasks, notes, text mes- sages and mobile phone e-mails can be dis- played using the Control Display if the mobile phone compatibly supports these functions and the required Bluetooth radio standards. For information about which mobile phones and functions are available, go to www.mini.com/ connectivity. A limited number of compatible mobile phones are available for Office. Contents are only displayed completely when the vehicle is stopped. Only read access to the mobile phone is possi- ble.
Do not use Office while driving. Make entries only when traffic and road condi-
tions permit; otherwise, you may endanger vehicle occupants and other road users by being distracted.<
Requirements > A suitable mobile phone is paired with the
vehicle and connected. In some mobile phones, the data access to the mobile phone must be confirmed.
180
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG Contacts
General information Contacts can be created and edited. The con- tacts from the mobile phone are displayed as well if this function is supported by the mobile phone. The addresses can be used as destina- tions for navigation and the phone numbers can be dialed.
Displaying contacts 1. "Office" 2. "Contacts"
All contacts are listed in alphabetical order. Depending on the number of contacts, an A-Z search is offered. A symbol indicates the storage location of the contacts:
Symbol
Storage location
No symbol
In the vehicle; the address has not been checked as a destination.
In the vehicle; the address has been checked as a desti- nation.
Mobile phone
Dialing phone numbers 1. Select the desired contact. 2. Select phone number.
The connection is established.
Office
COMMUNICATIONS
Editing a contact 1. Select the desired contact. 2. "Edit contact"
3. Change the entry. 4. "Store contact in vehicle" If a contact is changed, the changes are not stored in the mobile phone. A copy of the entry is stored in the vehicle, and only this copy is dis- played.
Selecting a contact as a destination 1. Select the desired contact. 2. Select address.
With contacts from the mobile phone, the address must be compared with the naviga- tion data stored in the vehicle. In this case: Correct the address.
3. "Start guidance" or "Add as another destina-
tion"
181
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG COMMUNICATIONS
Office
Checking the address as a destination An address that is to be used in route guidance must correspond to the navigation data stored in the vehicle. The address can be checked to ensure this. 1. Select the desired contact and highlight the
address.
2. Open "Options". 3. "Check as destination" 4. Correct and store the address, if necessary. If the address is corrected and stored, a copy of it is stored in the vehicle. The address is not changed on the mobile phone.
New contact A contact can be associated with up to 8 phone numbers, 2 addresses, 3 e-mail addresses, and one Internet address. 1. "Office" 2. "Contacts" 3. Open "Options". 4. "New contact"
5.
If input boxes are already filled with previous entries: "Delete input fields"
6. To fill in the entry fields: Select the symbol
next to the entry field.
7. Enter text and assign a contact type, refer to
page 182.
8. When equipped with a navigation system:
Enter address. It is only possible to enter addresses that are contained in the naviga- tion data stored in the vehicle. This ensures
182
that route guidance is possible for all addresses.
9. "Accept address" if necessary 10. "Store contact in vehicle"
Contact types Phone numbers and addresses can be assigned various contact types.
Symbol
Meaning
Private phone number
Business phone number
Mobile phone number
Other phone number
Private address
Business address
Defining a home address It is possible to store a home address. It is listed at the beginning of the contacts. 1. "Home" 2. Create a contact. 3. "Store contact in vehicle"
Selecting name sorting Names can be displayed in different orders. 1. "Office" 2. "Contacts" 3. Open "Options". 4. "Display: last, first name" or "Display: first,
last name"
Depending on how the contacts were stored in the mobile phone, the sorting of names can dif- fer from the sorting selected.
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG Displaying contact pictures Pictures stored with contacts are stored in the vehicle when the mobile phone is connected to the vehicle. The number of pictures transmitted depends on the mobile phone. The mobile phone must support this function. 1. "Office" 2. "Contacts" 3. Open "Options". 4. "Configure Bluetooth®" 5. "Show images" The display of all contact pictures is activated or deactivated.
Deleting contacts Only contacts that are stored in the vehicle are deleted. The contacts on the mobile phone can- not be deleted. 1. "Office" 2. "Contacts" 3. Highlight the contact. 4. "Options" 5. "Delete contact" or "Delete all contacts".
Messages
General information The displaying of text messages and e-mails depends on whether the mobile phone supports transmission to the vehicle. Text messages and e-mails may not be supported by the service provider or the function may have to be sepa- rately activated. After a mobile phone is paired for the first time, the transmission may take sev- eral minutes. Messages are only displayed com- pletely when the vehicle is stopped. Messages from the auxiliary phone are not transmitted.
Displaying messages 1. "Office" 2. "Messages"
Office
COMMUNICATIONS
Message type A symbol indicates the type of message.
Read message. Unread message.
Symbol
Message type
Text message
E-mail from mobile phone
Filtering message lists A message list can be filtered if there is more than one message type. 1. "Filter:" 2. Select message type.
> "All"
All messages are displayed.
> "Text message"
Only text messages from mobile phones are displayed.
> "E-mail"
Only text messages from mobile phones are displayed.
Text message
Calling a text message sender 1. Select the desired message. 2. Select the
symbol.
Saving sender in the contacts 1. Highlight the desired message. 2. Open "Options". 3. "Store as new contact" or "Add to existing
contact"
Using contact data Contact data from deadlines, tasks, text mes- sages, e-mails and notes can be stored or selected, see page 186.
183
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG COMMUNICATIONS
Office
Reading text messages aloud Reading text messages aloud, refer to page 186.
Calendar
E-mail
Displaying e-mail 1. "Office" 2. "Messages" 3.
Select the desired message.
Displaying e-mail contacts If the sender and receiver of an e-mail were transmitted from a mobile phone, they will be displayed in the e-mail. "Sender/Recipient"
If the e-mail address is stored in the contacts, then the contact is displayed. Select contact to display details. If the e-mail address is not stored in the con- tacts, then it may be that only the e-mail address is displayed.
Using contact data Contact data from deadlines, tasks, text mes- sages, e-mails and notes can be stored or selected, see page 186.
Deactivating entire display When opening an e-mail when in the vehicle, it is completely transferred to the vehicle. This may result in charges. 1. "Office" 2. "Messages" 3. Open "Options". 4. "Fully download e-mails"
Only a part of an e-mail from a mobile phone is loaded into the vehicle.
Reading e-mail Reading e-mail, see page 186.
184
Displaying calendar Appointments from the last 20 days and the next 50 days can be displayed. 1. "Office" 2. "Calendar"
Appointments of the current day are dis- played.
Selecting calendar day 1. Select date.
2. Select desired day or date.
> "Next day" > "Date:" > "Previous day" > "Today"
Displaying appointment 1. Select the desired appointment. 2. To scroll through appointment, if necessary:
> Turn the MINI joystick. > Select the
symbol.
Using contact data Contact data from deadlines, tasks, text mes- sages, e-mails and notes can be stored or selected, see page 186.
Reading an appointment aloud Reading an appointment aloud, refer to page 186.
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG Office
COMMUNICATIONS
Tasks
Displaying task list Display open tasks that must be completed within the next 90 days. 1. "Office" 2. "Tasks"
Sorting task list 1. Select the top line in the task list.
Notes
Displaying notes 1. "Office" 2. "Notes"
All notes are displayed.
Displaying a note 1. Select the desired note.
2. To select sorting criterion:
> "Priority (!)" > "Subject" > "Due date"
Displaying task 1. Select the desired task. 2. To scroll through the task, if necessary:
> Turn the MINI joystick. > Select the
symbol.
Using contact data Contact data from deadlines, tasks, text mes- sages, e-mails and notes can be stored or selected, see page 186.
Reading a task aloud Reading a task aloud, refer to page 186.
2. To scroll through the note, if necessary:
> Turn the MINI joystick. > Select the
symbol.
Using contact data Contact data from deadlines, tasks, text mes- sages, e-mails and notes can be stored or selected, see page 186.
Reading a note aloud Reading a note aloud, refer to page 186.
Reminders
Displaying reminders Reminders for imminent appointments and tasks are displayed. After an appointment has passed or a task is due, the reminder is deleted. 1. "Office" 2. "Reminders" 3. Select the desired reminder. The associated appointment or task is displayed.
185
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG COMMUNICATIONS
Office
Using contact data
Overview Contact data from deadlines, tasks, text mes- sages, e-mails and notes can be stored or selected.
To display a contact or dial a phone number: 1.
"Use contact data"
2. To display a contact or dial a phone number: > Select a contact to display a detailed view
of the contact.
> Select a phone number to directly estab-
lish a connection.
Storing contact data 1. 2. Highlight a phone number or e-mail
"Use contact data"
address.
3. Open "Options". 4. "Add to existing contact" or "Store as new
contact"
Reading aloud Text messages, e-mails, appointment entries, tasks, and notes can be read aloud to you. 1. Select the desired message, appointment,
task, or note.
2. Select the
symbol.
186
While the message is being read aloud, you have the following options: > "Pause"
Interrupt the reading. Select again to resume the reading.
"Back to beginning"
Read message again from the beginning.
> Select the
symbol.
Skip back one paragraph.
> Select the
symbol.
Skip over a paragraph.
> To terminate the reading, move the
MINI joystick to the left.
What to do if… For information on suitable mobile phones, refer to page 167. > Appointments, tasks, notes, or text mes-
sages are not being displayed? The mobile phone is not suitable for the missing function or is not correctly con- nected. The mobile phone is connected as an auxil- iary phone. The Office function is deactivated. The appointments are older than 20 days and are more than 50 days in the future. The tasks have been marked as completed or are more than 90 days in the future. Depending on the number of appointments, tasks, notes, and messages stored in the mobile phone, not all of them are displayed in the vehicle.
> Appointments or tasks from the mobile
phone are not being displayed at the correct time? The time zone, time, or date is incorrectly set in the Control Display and in the mobile phone.
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG Office
COMMUNICATIONS
> Texts of entries are not displayed com-
pletely? Texts are already shortened by the mobile phone. Synchronization between the mobile phone and vehicle can take a few minutes.
> Contact pictures are not being displayed?
Up to max. 200 contact pictures can be stored in the vehicle.
> If you have gone through all items in the list and still cannot activate the desired function please contact the Hotline or your MINI dealer.
187
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG COMMUNICATIONS
MINI Connected
MINI Connected
Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems.
Overview
The concept You can use MINI Connected to integrate certain software applications of a suitable mobile phone into your MINI. These software applications are displayed on the Control Display. They are oper- ated using the MINI joystick. The range of software applications can be coun- try-specific.
Requirements The following requirements must be met for the function of MINI Connected: > The operating system of the mobile phone must support the software applications of MINI Connected.
> The software applications are installed on
the mobile phone and are operational.
> Suitable mobile phone. > Appropriate mobile phone contract.
Possible additional costs incurred are not included with MINI Connected.
Only make entries when the traffic situa- tion allows you to do so. If you do not
observe this precaution, your being distracted can endanger vehicle occupants and other road users. For safety reasons, some software applications can only be used when the vehicle is stopped.<
188
Only use software applications approved by the manufacturer of your MINI; other-
wise, malfunctions may result.<
Notes For information on suitable mobile phones, available software applications, and their instal- lation: > At: www.mini.com/connectivity > At your MINI dealer.
Connecting a mobile phone
Connecting via the USB audio interface
1 USB interface 2 Connection for audio/video playback:
TRS connector 1/8"/3.5 mm
Connect the mobile phone using the special connecting cable, available at your MINI dealer, to the USB interface 1 and the AV-IN connection 2. To perform other operations on the mobile phone, refer to the Owner's Manual for the mobile phone: e.g. selecting and activating a software application.
Online Edition for Part no. 01 40 2 904 220 - © 03/12 BMW AG Connecting via the snap-in adapter The mobile phone can also be connected using the snap-in adapter, refer to page 178.
Using MINI Connected After successful connection of the mobile phone to the vehicle and activation of MINI Connected, the applications are displayed on the Control Display and can be operated using the MINI joy- stick. Volume adjustments can be made using the buttons on the steering wheel, refer to page 10, or using the volume control knob on the radio, refer to page 135. 1. Press the
button.
This opens the main menu.
2. "MINI Connected"
3. Select the desired software application. The extent of MINI Connected that is shown on the Control Display depends on the range of installed software applications on the mobile phone.
The data transfer of the software applica- tion from the telephone to the vehicle can take a few minutes. Some software applications depend on the speed of the available Internet connection for the mobile phone.< Certain versions of mobile phones used and their software can make it impossible to use MINI Connected and the Bluetooth hands-free system at the same time.
