Login- Download PDF Manual
-
symbol. Contact with more than one phone number. Select phone number, the connection is established. Call not possible, the mobile phone has no
reception or network.
Editing a contact Changing entries in the "Contacts" menu. If a contact is changed, the changes are not stored in the mobile phone. A copy of the entry is stored in the vehicle. 1. Highlight the contact. 2. Open "Options". 3. "Edit entry" The contact can be edited.
182
3. Select the desired entry and phone number,
if necessary.
The connection is established.
Deleting a single entry or all entries Deleting entries depends upon the mobile phone. 1. Highlight the entry. 2. Open "Options". 3. "Delete entry" or "Delete list".
Saving an entry in the contacts 1. Highlight the entry. 2. Open "Options". 3. "Store as new contact" or "Add to existing
contact".
4. Select the type of number: "Home", "Busi-
ness", "Mobile" or "Other".
5. Complete the entries if necessary. 6. "Store contact" if necessary
Online Edition for Part no. 01402917368 - © 10/12 BMW AG Mobile phone preparation Bluetooth
COMMUNICATIONS
Received calls
Hands-free system
Displaying calls The list of received calls in the telephone is transferred into the vehicle, depending on the mobile phone. The last 20 calls received are dis- played. The sorting and displaying of phone numbers depends on the mobile phone. 1. "Telephone" 2. "Received calls"
Calling a number from the list Select an entry. The connection is established.
Deleting a single entry or all entries Deleting entries depends upon the mobile phone. 1. Highlight the entry. 2. Open "Options". 3. "Delete entry" or "Delete list".
Saving an entry in the contacts 1. Highlight the entry. 2. Open "Options". 3. "Store as new contact" or "Add to existing
contact".
4. Select the type of number: "Home", "Busi-
ness", "Mobile" or "Other".
5. Complete the entries if necessary. 6. "Store contact" if necessary
General information Calls being conducted using the hands-free sys- tem can be continued using the mobile phone and vice versa.
From the mobile phone to the hands- free system Calls that have been initiated from outside the Bluetooth range of the vehicle can be continued using the hands-free system if the ignition is switched on. Depending on the mobile phone, the call is automatically switched to hands-free mode. If the switch does not occur automatically, then follow the instructions that appear on the dis- play of the mobile phone, also refer to the Owner's Manual for the mobile phone.
From hands-free system to mobile phone Calls being conducted using the hands-free sys- tem can also be continued using the mobile phone if so desired, depending on the mobile phone. At this point, follow the instructions that appear on the display of the mobile phone, also refer to the Owner's Manual for the mobile phone.
Operation by voice Equipped with voice activation system: opera- tion, refer to page 21. For the list with the short commands, refer to page 252, does not apply for this type of voice operation. Equipped without voice activation system: depending upon the equipment, the mobile phone can be voice-operated as described below.
183
Online Edition for Part no. 01402917368 - © 10/12 BMW AG COMMUNICATIONS
Mobile phone preparation Bluetooth
The concept > The mobile phone can be operated without
Example: dialing phone numbers 1. Briefly press the
button on the steering
removing your hand from the steering wheel.
> In many cases, the entry process is sup- ported by means of announcements or questions.
> {...} Verbal instructions to use with the voice
operation system.
> {{...}} Identifies the answers generated by
the voice operation system.
wheel. {Dial number}
2. 3. The system replies: {{Please say the num-
ber.}}
4. For example: {123 456 7890} 5. The system replies: {{123 456 7890. Con-
6.
tinue?}} {Dial} System replies: {{Dialing number.}}
Voice commands
Activating voice activation system 1. Briefly press the
button on the steering
wheel.
2. Say the command.
Finishing voice input Press the briefly or
button on the steering wheel
{Cancel}.
Possible commands
Having possible commands read aloud Press the
button on the steering wheel.
{Help}.
Possible commands are read aloud. Each digit can be spoken individually or com- bined into a sequence to accelerate the entry process.
Using alternative commands There are often a number of commands to run a function, e.g.:
{Dial name} or {Name}.
184
Calling
Dialing phone numbers
{Dial number}.
1. 2. Say the phone number. 3.
{Dial}.
The connection to the desired subscriber is established.
Correcting phone number Digit sequences can be deleted after the system has repeated the digits. {Correct number}.
The command can be repeated as often as nec- essary.
Deleting phone number
{Delete}.
All digits entered up to this point are deleted.
Redialing
{Redial}.
Voice phone book Depending on how your vehicle is equipped, it may be necessary to create your own voice phone book.
Online Edition for Part no. 01402917368 - © 10/12 BMW AG Mobile phone preparation Bluetooth
COMMUNICATIONS
The entries must be entered by voice and are independent of the mobile phone's memory. Up to 50 entries can be set up.
Storing the entry
{Save name}.
1. 2. Say the name aloud. Do not exceed a speaking duration of about 2 seconds.
3. Say the phone number after being prompted to do so by the system. {Save}.
4.
Deleting the entry
{Delete name}.
1. 2. Say the name when prompted. 3. Confirm prompt with {Yes}.
Deleting all entries
1.
{Delete phonebook}. The dialog for deleting phone book is opened.
2. Confirm prompt with {Yes}. 3. Confirm repeated prompt with {Yes}.
Reading and selecting the entries
1.
2.
{Read phonebook}. The dialog for reading phone book is opened. {Dial number} when the desired entry is read aloud.
Selecting an entry {Dial name}.
1. 2. Say the name when prompted. 3. Confirm prompt with {Yes}.
Adjusting volume Turn knob during announcement. > The volume remains the same, even if the volume of other audio sources is changed.
> The volume is stored for the remote control
currently in use.
Notes Do not use the voice operation system to initiate an emergency call. In stressful situations, the voice and vocal pitch can change. This can unnecessarily delay the establishment of a tele- phone connection.
Ambient conditions > Say the commands, numbers and letters
smoothly and with normal volume, empha- sis and speed.
> Always say the commands in the language of the system. The language for voice oper- ation system is preset and can not be changed via the Control Display.
> Keep doors, windows, glass sunroof/pan-
oramic sunroof, or convertible top closed to avoid noise interference.
> Avoid ambient noise in the vehicle while
speaking.
Snap-in adapter
The concept The snap-in adapter makes it possible to do the following: > Accommodate the mobile phone. > Recharge its battery. > Connect to the outside antenna of the vehi-
cle.
This assures a better network connection and constant sound quality.
General information Detailed information on snap-in adapters that compatibly support mobile phone functions can be found at your MINI dealer. Do not expose your mobile phone to extreme ambient conditions, for example, very high tem- peratures; otherwise, functions on your mobile phone may not work. Follow the operating instructions for your mobile phone.
185
Online Edition for Part no. 01402917368 - © 10/12 BMW AG COMMUNICATIONS
Mobile phone preparation Bluetooth
Installation location In the center armrest.
Inserting snap-in adapter 1. Press the button and remove the cover.
Removing mobile phone
Press the button and remove the mobile phone.
2.
Insert the snap-in adapter at the front, arrow 1, and press downward, arrow 2, until it clicks into place.
Inserting mobile phone
1. Depending on the mobile phone, it may be necessary to remove the protective cap of the antenna connector and from the USB connection of the mobile phone.
2. Push the mobile phone with the buttons fac-
ing upward toward the electrical connec- tions and press down until it engages.
186
Online Edition for Part no. 01402917368 - © 10/12 BMW AG Office
Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems.
Overview
General information Contacts, appointments, tasks, notes, text mes- sages and mobile phone e-mails can be dis- played using the Control Display if the mobile phone compatibly supports these functions and the required Bluetooth radio standards. For information about which mobile phones and functions are available, go to www.mini.com/ connectivity. A limited number of compatible mobile phones are available for Office. Contents are only displayed completely when the vehicle is stopped. Only read access to the mobile phone is possi- ble.
Do not use Office while driving. Make entries only when traffic and road condi-
tions permit; otherwise, you may endanger vehicle occupants and other road users by being distracted.<
Requirements > A suitable mobile phone is paired with the
vehicle and connected. In some mobile phones, the data access to the mobile phone must be confirmed.
Office
COMMUNICATIONS
> Time zones, time, and date, refer to
page 66, are correctly adjusted on the Con- trol Display and on the mobile phone in order, for example, to correctly display appointments.
Updating Every time that the mobile phone is connected to the vehicle, data are updated. Appointments, tasks, notes and reminders can be updated sep- arately. 1. "Office" 2. "Current office", "Calendar", "Tasks",
"Notes" or "Reminders"
3. Open "Options". 4. "Update data"
Data from the mobile phone are again trans- ferred to the vehicle.
Current office The number of unread messages and active tasks as well as upcoming appointments are dis- played. 1. "Office" 2. "Current office" 3. Select the desired entry to display details.
187
Online Edition for Part no. 01402917368 - © 10/12 BMW AG COMMUNICATIONS
Office
Contacts
General information Contacts can be created and edited. The con- tacts from the mobile phone are displayed as well if this function is supported by the mobile phone. The addresses can be used as destina- tions for navigation and the phone numbers can be dialed.
Displaying contacts 1. "Office" 2. "Contacts"
The connection is established.
Editing a contact 1. Select the desired contact. 2. "Edit contact"
3. Change the entry. 4. "Store contact in vehicle" If a contact is changed, the changes are not stored in the mobile phone. A copy of the entry is stored in the vehicle, and only this copy is dis- played.
Selecting a contact as a destination 1. Select the desired contact. 2. Select address.
With contacts from the mobile phone, the address must be compared with the naviga- tion data stored in the vehicle. In this case: Correct the address.
3. "Start guidance" or "Add as another destina-
tion"
All contacts are listed in alphabetical order. Depending on the number of contacts, an A-Z search is offered. A symbol indicates the storage location of the contacts:
Symbol
Storage location
No symbol
In the vehicle; the address has not been checked as a destination.
In the vehicle; the address has been checked as a desti- nation.
Mobile phone
Dialing phone numbers 1. Select the desired contact. 2. Select phone number.
188
Online Edition for Part no. 01402917368 - © 10/12 BMW AG Checking the address as a destination An address that is to be used in route guidance must correspond to the navigation data stored in the vehicle. The address can be checked to ensure this. 1. Select the desired contact and highlight the
address.
2. Open "Options". 3. "Check as destination" 4. Correct and store the address, if necessary. If the address is corrected and stored, a copy of it is stored in the vehicle. The address is not changed on the mobile phone.
New contact A contact can be associated with up to 8 phone numbers, 2 addresses, 3 e-mail addresses, and one Internet address. 1. "Office" 2. "Contacts" 3. Open "Options". 4. "New contact"
5.
If input boxes are already filled with previous entries: "Delete input fields"
6. To fill in the entry fields: select the symbol
next to the entry field.
7. Enter text and assign a contact type, refer to
page 189.
8. When equipped with a navigation system:
enter address. It is only possible to enter addresses that are contained in the naviga- tion data stored in the vehicle. This ensures
Office
COMMUNICATIONS
that route guidance is possible for all addresses.
9. "Accept address" if necessary 10. "Store contact in vehicle"
Contact types Phone numbers and addresses can be assigned various contact types.
Symbol
Meaning
Private phone number
Business phone number
Mobile phone number
Other phone number
Private address
Business address
Defining a home address It is possible to store a home address. It is listed at the beginning of the contacts. 1. "Home" 2. Create a contact. 3. "Store contact in vehicle"
Selecting name sorting Names can be displayed in different orders. 1. "Office" 2. "Contacts" 3. Open "Options". 4. "Display: last, first name" or "Display: first,
last name"
Depending on how the contacts were stored in the mobile phone, the sorting of names can dif- fer from the sorting selected.
189
Online Edition for Part no. 01402917368 - © 10/12 BMW AG COMMUNICATIONS
Office
Displaying contact pictures Pictures stored with contacts are stored in the vehicle when the mobile phone is connected to the vehicle. The number of pictures transmitted depends on the mobile phone. The mobile phone must support this function. 1. "Office" 2. "Contacts" 3. Open "Options". 4. "Configure Bluetooth®" 5. "Show images" The display of all contact pictures is activated or deactivated.
Deleting contacts Only contacts that are stored in the vehicle are deleted. The contacts on the mobile phone can- not be deleted. 1. "Office" 2. "Contacts" 3. Highlight the contact. 4. "Options" 5. "Delete contact" or "Delete all contacts".
Messages
General information The displaying of text messages and e-mails depends on whether the mobile phone supports transmission to the vehicle. Text messages and e-mails may not be supported by the service provider or the function may have to be sepa- rately activated. After a mobile phone is paired for the first time, the transmission may take sev- eral minutes. Messages are only displayed com- pletely when the vehicle is stopped. Messages from the auxiliary phone are not transmitted.
Displaying messages 1. "Office" 2. "Messages"
190
Message type A symbol indicates the type of message.
Read message. Unread message.
Symbol
Message type
Text message
E-mail from mobile phone
Filtering message lists A message list can be filtered if there is more than one message type. 1. "Filter:" 2. Select message type.
> "All"
All messages are displayed.
> "Text message"
Only text messages from mobile phones are displayed.
> "E-mail"
Only text messages from mobile phones are displayed.
Text message
Calling a text message sender 1. Select the desired message. 2. Select the
symbol.
Saving sender in the contacts 1. Highlight the desired message. 2. Open "Options". 3. "Store as new contact" or "Add to existing
contact"
Using contact data Contact data from deadlines, tasks, text mes- sages, e-mails and notes can be stored or selected, see page 193.
Online Edition for Part no. 01402917368 - © 10/12 BMW AG Office
COMMUNICATIONS
Reading text messages aloud Reading text messages aloud, refer to page 193.
Calendar
E-mail
Displaying e-mail 1. "Office" 2. "Messages" 3.
Select the desired message.
Displaying e-mail contacts If the sender and receiver of an e-mail were transmitted from a mobile phone, they will be displayed in the e-mail. "Sender/Recipient"
If the e-mail address is stored in the contacts, then the contact is displayed. Select contact to display details. If the e-mail address is not stored in the con- tacts, then it may be that only the e-mail address is displayed.
Using contact data Contact data from deadlines, tasks, text mes- sages, e-mails and notes can be stored or selected, see page 193.
Deactivating entire display When opening an e-mail when in the vehicle, it is completely transferred to the vehicle. This may result in charges. 1. "Office" 2. "Messages" 3. Open "Options". 4. "Fully download e-mails"
Only a part of an e-mail from a mobile phone is loaded into the vehicle.
Reading e-mail Reading e-mail, see page 193.
Displaying calendar Appointments from the last 20 days and the next 50 days can be displayed. 1. "Office" 2. "Calendar"
Appointments of the current day are dis- played.
Selecting calendar day 1. Select date.
2. Select desired day or date.
> "Next day" > "Date:" > "Previous day" > "Today"
Displaying appointment 1. Select the desired appointment. 2. To scroll through appointment, if necessary:
> Turn the MINI joystick. > Select the
symbol.
Using contact data Contact data from deadlines, tasks, text mes- sages, e-mails and notes can be stored or selected, see page 193.
Reading an appointment aloud Reading an appointment aloud, refer to page 193.
191
Online Edition for Part no. 01402917368 - © 10/12 BMW AG COMMUNICATIONS
Office
Tasks
Displaying task list Display open tasks that must be completed within the next 90 days. 1. "Office" 2. "Tasks"
Sorting task list 1. Select the top line in the task list.
Notes
Displaying notes 1. "Office" 2. "Notes"
All notes are displayed.
Displaying a note 1. Select the desired note.
2. To select sorting criterion:
> "Priority (!)" > "Subject" > "Due date"
Displaying task 1. Select the desired task. 2. To scroll through the task, if necessary:
> Turn the MINI joystick. > Select the
symbol.
Using contact data Contact data from deadlines, tasks, text mes- sages, e-mails and notes can be stored or selected, see page 193.
Reading a task aloud Reading a task aloud, refer to page 193.
192
2. To scroll through the note, if necessary:
> Turn the MINI joystick. > Select the
symbol.
Using contact data Contact data from deadlines, tasks, text mes- sages, e-mails and notes can be stored or selected, see page 193.
Reading a note aloud Reading a note aloud, refer to page 193.
Reminders
Displaying reminders Reminders for imminent appointments and tasks are displayed. After an appointment has passed or a task is due, the reminder is deleted. 1. "Office" 2. "Reminders" 3. Select the desired reminder. The associated appointment or task is displayed.
Online Edition for Part no. 01402917368 - © 10/12 BMW AG Using contact data
Overview Contact data from deadlines, tasks, text mes- sages, e-mails and notes can be stored or selected.
Displaying a contact or dialing a phone number 1.
"Use contact data"
2. To display a contact or dial a phone number: > Select a contact to display a detailed view
of the contact.
> Select a phone number to directly estab-
lish a connection.
Storing contact data 1. 2. Highlight a phone number or e-mail
"Use contact data"
address.
3. Open "Options". 4. "Add to existing contact" or "Store as new
contact"
Reading aloud Text messages, e-mails, appointment entries, tasks, and notes can be read aloud to you. 1. Select the desired message, appointment,
task, or note.
2. Select the
symbol.
Office
COMMUNICATIONS
While the message is being read aloud, you have the following options: > "Pause"
Interrupt the reading. Select again to resume the reading.
"Back to beginning"
Read message again from the beginning.
> Select the
symbol.
Skip back one paragraph.
> Select the
symbol.
Skip over a paragraph.
> To terminate the reading, move the
MINI joystick to the left.
What to do if… For information on suitable mobile phones, refer to page 174. > Appointments, tasks, notes, or text mes-
sages are not being displayed? The mobile phone is not suitable for the missing function or is not correctly con- nected. The mobile phone is connected as an auxil- iary phone. The Office function is deactivated. The appointments are older than 20 days and are more than 50 days in the future. The tasks have been marked as completed or are more than 90 days in the future. Depending on the number of appointments, tasks, notes, and messages stored in the mobile phone, not all of them are displayed in the vehicle.
> Appointments or tasks from the mobile
phone are not being displayed at the correct time? The time zone, time, or date is incorrectly set in the Control Display and in the mobile phone.
193
Online Edition for Part no. 01402917368 - © 10/12 BMW AG COMMUNICATIONS
Office
> Texts of entries are not displayed com-
pletely? Texts are already shortened by the mobile phone. Synchronization between the mobile phone and vehicle can take a few minutes.
> Contact pictures are not being displayed?
Up to max. 200 contact pictures can be stored in the vehicle.
> If you have gone through all items in the list and still cannot activate the desired function please contact the Hotline or your MINI dealer.
194
Online Edition for Part no. 01402917368 - © 10/12 BMW AG MINI Connected
COMMUNICATIONS
MINI Connected
Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems.
Overview
The concept You can use MINI Connected to integrate certain software applications of a suitable mobile phone into your MINI. These software applications are displayed on the Control Display. They are oper- ated using the MINI joystick. The range of software applications can be coun- try-specific.
Requirements The following requirements must be met for the function of MINI Connected: > The operating system of the mobile phone must support the software applications of MINI Connected.
> The software applications are installed on
the mobile phone and are operational.
> Suitable mobile phone. > Appropriate mobile phone contract.
Possible additional costs incurred are not included with MINI Connected.
Only make entries when the traffic situa- tion allows you to do so. If you do not
observe this precaution, your being distracted can endanger vehicle occupants and other road users. For safety reasons, some software applications can only be used when the vehicle is stopped.<
Only use software applications approved by the manufacturer of your MINI; other-
wise, malfunctions may result.<
Notes For information on suitable mobile phones, available software applications, and their instal- lation: > At: www.mini.com/connectivity > At your MINI dealer.
Connecting a mobile phone
Connecting via the USB audio interface
1 USB interface 2 Connection for audio/video playback:
TRS connector 1/8"/3.5 mm
Connect the mobile phone using the special connecting cable, available at your MINI dealer, to the USB interface 1 and the AV-IN connection 2. To perform other operations on the mobile phone, refer to the Owner's Manual for the mobile phone: e.g. selecting and activating a software application.
195
Online Edition for Part no. 01402917368 - © 10/12 BMW AG COMMUNICATIONS
MINI Connected
Connecting via the snap-in adapter The mobile phone can also be connected using the snap-in adapter, refer to page 185.
Using MINI Connected After successful connection of the mobile phone to the vehicle and activation of MINI Connected, the applications are displayed on the Control Display and can be operated using the MINI joy- stick. Volume adjustments can be made using the buttons on the steering wheel, refer to page 10, or using the volume control knob on the radio, refer to page 141. 1. Press the
button.
This opens the main menu.
2. "MINI Connected"
PlugIn Selected functions for a compatible Apple device are shown on the Control Display via a video link. Operation is via the MINI joystick and an onboard monitor. 1. Connecting an Apple device.
> via a USB audio interface, refer to
page 195.
> via the snap-in adapter, refer to
page 185.
2. "MINI Connected" 3. "PlugIn" 4. Select the type of connection: "Activate via
AUX connection" or "Activate via Snap-In adapter"
5. "Activate PlugIn" 6. Navigate among the functions shown via a MINI joystick and, e.g., select a desired cate- gory or track.
button to return back or to change
Press the to a level higher within the functions of the Apple device. Press the main menu. Additional information can be found in the MINI Connected Owner's Manual at www.mini.com/connectivity.
button twice to return back to the
Note Audio and video playback from a snap-in adapter may only be possible if there is no cable connected to the AV-In port.
3. Select the desired software application. The extent of MINI Connected that is shown on the Control Display depends on the range of installed software applications on the mobile phone.
The data transfer of the software applica- tion from the telephone to the vehicle can take a few minutes. Some software applications depend on the speed of the available Internet connection for the mobile phone.< Certain versions of mobile phones used and their software can make it impossible to use MINI Connected and the Bluetooth hands-free system at the same time. After a phone call, it may be necessary to restart the software application on the mobile phone.
196
Online Edition for Part no. 01402917368 - © 10/12 BMW AG MINI Connected
COMMUNICATIONS
197
Online Edition for Part no. 01402917368 - © 10/12 BMW AG Move Me.
Online Edition for Part no. 01402917368 - © 10/12 BMW AG AT A GLANCE
CONTROLS
DRIVING TIPS
NAVIGATION
Entertainment
COMMUNICATIONS
MOBILITY
REFERENCE
Online Edition for Part no. 01402917368 - © 10/12 BMW AG MOBILITY
Refueling
Refueling
Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems.
General information
Switch off the engine before refueling; otherwise, fuel cannot be added to the
tank and a message will be displayed.<
Take all precautionary measures and observe all applicable regulations when handling fuel. Do not carry any spare fuel con- tainers in your vehicle. They can develop a leak and cause an explosion or cause a fire in the event of an accident.<
Fuel filler flap
Opening MINI Countryman:
MINI Paceman:
1. Open the fuel filler flap. 2. Turn the fuel cap counterclockwise. 3. Place the fuel cap in the bracket attached to
the fuel filler flap.
Closing Fit the cap and turn it clockwise until you clearly hear a click.
Do not pinch the band attached to the cap; otherwise, the cap cannot be closed properly and fuel vapors can escape. A message will be displayed if the fuel cap is loose or miss- ing.<
Manually releasing the fuel filler flap In the event of an electrical malfunction, you can manually release the fuel filler flap: MINI Countryman:
200
Online Edition for Part no. 01402917368 - © 10/12 BMW AG Refueling
MOBILITY
MINI Paceman:
5 liters of fuel. If the vehicle is at an angle, a larger amount of fuel may be necessary.
1. Open cargo area trim panel, arrow 1. 2. Pull on the green knob with the fuel pump
symbol. The fuel filler flap opens.
Observe the following when refueling
Take all precautionary measures and observe all applicable regulations when handling fuel; otherwise, there is a danger of personal injury and property damage.< When refueling, insert the filler nozzle com- pletely into the filler pipe. Avoid lifting the filler nozzle while filling the tank, as that would lead to > premature pump shutoff > reduced efficiency of the fuel-vapor recov-
ery system.
The fuel tank is full when you top off twice after the first time that the fuel pump nozzle clicks off.
Do not overfill the fuel tank; otherwise, overflowing fuel can cause damage to the
environment and the vehicle.<
Fuel tank capacity
If the range displayed is less than 30 miles/50 km, be sure to refuel; other- wise, engine functions are not guaranteed and damage may occur.< Approx. 12.3 US gal/47 liters, including the reserve capacity of 2.1 US gal/8 liters. If the engine can no longer be started because of an empty fuel tank, add at least 1.3 US gal/
Fuel specifications
Gasoline For optimum fuel efficiency, the gasoline should be free of sulfur or as low in sulfur as possible. Fuels that are labeled at the pump as containing metal may not be used.
Do not fill the tank with leaded gasoline or gasoline that contains metal additives,
such as manganese or iron; otherwise, long term damage to the catalytic converter or other com- ponents may result.< Fuels with a maximum ethanol content of up to 10%, that is, E10, can be used. The ethanol should meet the following quality standards: US: ASTM 4806-xx CAN: CGSB-3.511-xx xx: Always observe currently valid standards.
Do not fill the tank with E85, i.e. fuel con- taining 85% ethanol, nor with FlexFuel. Otherwise, the engine and fuel supply system will be damaged.< The engine is knocking regulated. Therefore, dif- ferent grades of gasoline can be used for refuel- ing.
Recommended gasoline grades The manufacturer of your MINI recommends: > AKI 91. > John Cooper Works: AKI 93.
Minimum quality The manufacturer of your MINI recommends AKI 89.
Do not use any gasoline below the speci- fied minimum fuel grade. Otherwise, the
engine could be damaged.<
201
Online Edition for Part no. 01402917368 - © 10/12 BMW AG MOBILITY
Refueling
If you use gasoline with this minimum AKI rating, the engine may produce knocking sounds when starting at high external temperatures. This has no effect on the engine life.
The use of poor quality fuels may result in harmful engine deposits or damage. Addi- tionally, problems relating to drivability, starting and stalling, especially under certain environ- mental conditions such as high ambient temper- atures and high altitudes, may occur. If drivability problems are encountered, we rec- ommend switching to a high quality gasoline brand and a higher octane grade - AKI number - for a few tankfuls. To avoid harmful engine deposits, it is highly recommended to purchase gasoline from BP or Top Tier retailers. Failure to comply with these recommendations may result in a need for unscheduled mainte- nance.<
202
Online Edition for Part no. 01402917368 - © 10/12 BMW AG Wheels and tires
MOBILITY
Wheels and tires
Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems.
Tire inflation pressures
Information for your safety It is not merely the tires' service life, but also driving comfort and, to a great extent, driving safety that depend on the condition of the tires and the maintenance of the specified tire pres- sure.
Checking pressure
Check the tire inflation pressure regularly and correct it, if necessary: at least twice a month and before starting long trips. If you fail to observe this precaution you may be driving on tires with incorrect tire pressures, a condition that can not only compromise your vehicle's driving stability, but also lead to tire damage and the risk of an accident. Do not drive with deflated, i.e. flat tires, except when using run- flat tires. A flat tire will seriously impair your vehicle's handling and braking response. Attempts to drive on a flat tire can lead to loss of control over the vehicle.< Check the tire inflation pressures only on cold tires. This means after a maximum of 1.25 miles/ 2 km driving or when the vehicle has been parked for at least 2 hours. When tires are warm, the tire inflation pressure is higher.
After adjusting the tire inflation pressure, reinitialize the Flat Tire Monitor, page 75,
or reset the Tire Pressure Monitor, page 78.<
Pressure specifications The tables below provide all the correct inflation pressures for the specified tire sizes at ambient temperature.
The tire inflation pressures apply to the tire sizes approved and the tire brands recommended by the manufacturer of your MINI. Your MINI dealer will be glad to advise you.< For correct identification of the right tire infla- tion pressures, observe the following: > Tire sizes for your vehicle > Maximum allowable driving speed
Tire inflation pressures for driving up to 100 mph or 160 km/h For normal driving up to 100 mph or 160 km/h and to achieve optimum driving comfort, adjust pressures to the respective tire inflation pres- sures listed on the following pages in the col- umns for traveling speeds up to a maximum of 100 mph or 160 km/h. These tire inflation pressures can also be found on the driver's side door pillar when the driver's door is open. MINI Countryman:
203
Online Edition for Part no. 01402917368 - © 10/12 BMW AG MOBILITY
Wheels and tires
MINI Paceman:
The maximum permitted speed for these tire inflation pressures is 100 mph or
160 km/h. Do not exceed this speed; otherwise, tire damage and accidents may occur.<
Tire inflation pressures for driving above 100 mph or 160 km/h
In order to drive at maximum speeds in excess of 100 mph or 160 km/h, adjust pressures to the respective tire inflation pres- sures listed on the following pages in the col- umns for traveling speeds including those exceeding 100 mph or 160 km/h. Otherwise, tire damage and accidents could occur.< Observe all national and local maximum speed limits; otherwise, violations of the law could occur.
204
Online Edition for Part no. 01402917368 - © 10/12 BMW AG Wheels and tires
MOBILITY
Tire inflation pressures MINI Cooper Countryman
Tire size
Tire pressures in bar/psi
Speeds up to a max. of 100 mph / 160 km/h
Speeds including those
exceeding
100 mph / 160 km/h
All pressure specifications in the table are indicated in bar/psi for cold tires. Cold = ambient temper- ature
195/60 R 16 89 H M+S Std 205/55 R 17 91 H M+S RSC 205/55 R 17 91 H M+S A/S RSC 205/55 R 17 91 V RSC 225/45 R 18 91 V RSC 225/40 R 19 89 V RSC
2.2/32
2.2/32
2.4/35
2.4/35
More details on the permissible load and weights can be found on page 248.
205
Online Edition for Part no. 01402917368 - © 10/12 BMW AG MOBILITY
Wheels and tires
Tire inflation pressures MINI Cooper S Countryman / Cooper S ALL4 Countryman
Tire size
Tire pressures in bar/psi
Speeds up to a max. of 100 mph / 160 km/h
Speeds including those
exceeding
100 mph / 160 km/h
All pressure specifications in the table are indicated in bar/psi for cold tires. Cold = ambient temper- ature
195/60 R 16 89 H M+S Std 205/55 R 17 91 H M+S RSC 205/55 R 17 91 H M+S A/S RSC 205/55 R 17 91 V RSC 225/45 R 18 91 V RSC 225/40 R 19 89 V RSC
2.2/32
2.2/32
2.6/38
2.6/38
More details on the permissible load and weights can be found on page 248.
206
Online Edition for Part no. 01402917368 - © 10/12 BMW AG Wheels and tires
MOBILITY
MINI Countryman John Cooper Works tire inflation pressures
Tire size
Tire pressures in bar/psi
Speeds up to a max. of 100 mph / 160 km/h
Speeds including those
exceeding
100 mph / 160 km/h
All pressure specifications in the table are indicated in bar/psi for cold tires. Cold = ambient temper- ature
195/60 R 16 89 H M+S Std 205/55 R 17 91 H M+S RSC 205/55 R 17 91 H M+S A/S RSC 225/45 R 18 91 V RSC 225/40 R 19 89 V RSC
2.4/35
2.4/35
2.6/38
2.6/38
More details on the permissible load and weights can be found on page 248.
207
Online Edition for Part no. 01402917368 - © 10/12 BMW AG MOBILITY
Wheels and tires
Tire inflation pressures for MINI Paceman Cooper
Tire size
Tire pressures in bar/psi
Speeds up to a max. of 100 mph / 160 km/h
Speeds including those
exceeding
100 mph / 160 km/h
All pressure specifications in the table are indicated in bar/psi for cold tires. Cold = ambient temper- ature
195/60 R 16 89 H M+S Std 205/55 R 17 91 H M+S RSC 205/55 R 17 91 H M+S A/S RSC 205/55 R 17 91 V RSC 225/45 R 18 91 V RSC 225/40 R 19 89 V RSC
2.2/32
2.2/32
2.4/35
2.4/35
More details on the permissible load and weights can be found on page 248.
208
Online Edition for Part no. 01402917368 - © 10/12 BMW AG Wheels and tires
MOBILITY
Tire inflation pressures for MINI Paceman Cooper S / Paceman Cooper S ALL4
Tire size
Tire pressures in bar/psi
Speeds up to a max. of 100 mph / 160 km/h
Speeds including those
exceeding
100 mph / 160 km/h
All pressure specifications in the table are indicated in bar/psi for cold tires. Cold = ambient temper- ature
195/60 R 16 89 H M+S Std 205/55 R 17 91 H M+S RSC 205/55 R 17 91 H M+S A/S RSC 205/55 R 17 91 V RSC 225/45 R 18 91 V RSC 225/40 R 19 89 V RSC
2.2/32
2.2/32
2.6/38
2.6/38
More details on the permissible load and weights can be found on page 248.
209
Online Edition for Part no. 01402917368 - © 10/12 BMW AG MOBILITY
Wheels and tires
Tire identification marks Knowledge of the labeling on the side of the tire makes it easier to identify and choose the right tires.
225/45 R 17 91 V
Tire size e.g. Nominal width in mm Aspect ratio in Ξ Radial belt construction Rim diameter in inches Load rating, (not on ZR tires) Speed code letter, (before the R on ZR tires)
Speed letter Q = up to 100 mph/160 km/h T = up to 118 mph/190 km/h H = up to 131 mph/210 km/h V = up to 150 mph/240 km/h W = up to 167 mph/270 km/h Y = up to 186 mph/300 km/h
Tire Identification Number Tires with DOT codes meet the guidelines of the US Department of Transportation. DOT code:
DOT xxxx xxx 1012
Uniform Tire Quality Grading For instance: Manufacturer's code for tire make tire size and tire design Tire age Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Tread wear 200 Traction AA Temperature A
210
DOT Quality Grades Tread wear Traction AA A B C Temperature A B C
All passenger car tires must conform to Federal Safety Requirements in addition
to these grades.<
Tread wear The tread wear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified gov- ernment test course. For example, a tire graded 150 would wear one and one-half (1γ) times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, how- ever, and may depart significantly from the norm due to variations in driving habits, service practices and differences in road characteristics and climate.
Traction The traction grades, from highest to lowest, are AA, A, B, and C. These grades represent the tire's ability to stop on wet pavement, as measured under con- trolled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.
The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, corner- ing, hydroplaning, or peak traction characteris- tics.<
Temperature The temperature grades are A, the highest, B, and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel. Sus- tained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire
Online Edition for Part no. 01402917368 - © 10/12 BMW AG Wheels and tires
MOBILITY
failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 109. Grades B and A represent lev- els of performance on the laboratory test wheel that exceed the minimum required by law. The temperature grade for this tire is established for a tire that is properly
inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either sep- arately or in combination, can cause heat buildup and possible tire failure.<
RSC - run-flat tires You will recognize run-flat tires by a circular symbol containing the letters RSC on the side of the tire, page 212.
M+S Winter and all-season tires. These have better winter properties than sum- mer tires.
XL Designation for specially reinforced tires.
Tire condition Inspect your tires regularly for tread wear, signs of damage and for foreign objects lodged in the tread. Check the tread depth.
Tread depth The tread depth should not drop below 0.12 in/ 3 mm, although, for example, European legisla- tion only specifies a minimum tread depth of 0.063 in/1.6 mm. At tread depths below 0.12 in/ 3 mm there is an increased risk of high-speed hydroplaning, even when only small amounts of water are present on the road surface.
Winter tires When winter tires wear down past a tread depth of 0.16 in/4 mm, they become perceptibly less
suitable for winter conditions. In the interest of safety, new tires should be installed.
Minimum tread depth
Wear indicators in the base of the tread groove are distributed around the tire's circumference; the letters TWI, for Tread Wear Indicator, on the tire's sidewalls identify tires that incorporate these wear indicators. If the tire tread has been driven down to the wear indicators, a tread depth of 0.063 in/1.6 mm has been reached.
Tire damage Driving over rough or damaged road surfaces, as well as debris, curbs, and other obstacles can cause serious damage to wheels, tires, and sus- pension parts. This is more likely to occur with low-profile tires, which provide less cushioning between the wheel and the road. Be careful to avoid road hazards and reduce your speed, especially if your vehicle is equipped with low- profile tires. Unusual vibrations encountered during normal vehicle operation can indicate tire failure or some other vehicle defect. This can, for exam- ple, be caused by driving over curbs. The same applies to any other abnormal road behavior, such as pulling severely to the right or left.
In these cases, reduce speed immediately and have wheels and tires thoroughly
checked. To do so, drive carefully to the nearest MINI dealer or a specialized tire shop that has specially trained personnel working in accor- dance with the specifications of the MINI manu- facturer. If necessary, have the vehicle towed there.
211
Online Edition for Part no. 01402917368 - © 10/12 BMW AG MOBILITY
Wheels and tires
Otherwise, tire damage can be extremely dan- gerous for vehicle occupants and other road users.<
properly, there is a danger of subsequent dam- age and related safety hazards. Make sure that the new wheels are balanced.<
Tire age The manufacturing date of tires is contained in the tire coding: DOT ... 1012 means that the tire was manufac- tured during the 10th week of 2012. For various reasons, such as the development of brittleness, the manufacturer of your MINI rec- ommends tire replacement after no more than 6 years, regardless of the actual wear of the tires.
Run-flat tires
The symbol identifying run-flat tires is a circle with the letters RSC on the sidewall. Run-flat tires comprise a conditionally self-sup- porting tire and a special rim. The reinforcement in the sidewalls ensures that the tire can con- tinue to be used subject to certain restrictions, even if depressurized. For information on continuing to drive with a flat tire, refer to Indication of a flat tire, page 76.
New wheels and tires
Have new wheels and tires mounted only by your MINI dealer or a specialized tire shop that has specially trained personnel work- ing in accordance with the specifications of the MINI manufacturer. If this work is not carried out
212
Retreaded tires
The manufacturer of your MINI recom- mends that you avoid using retreaded tires, as this could impair driving safety. The causes for this include potentially different tire casing structures and often wide variations in tire age, which can result in a limited service life.<
Correct wheels and tires
The manufacturer of your MINI recom- mends mounting only wheels and tires
that it has specifically approved for use on your particular model. Although other wheels and tires may theoretically have the same dimen- sions, variations in factors such as manufactur- ing tolerances can result in contact between tire and bodywork, ultimately leading to serious accidents. The manufacturer of your MINI can- not evaluate non-approved wheels and tires to determine if they are suited for use, and there- fore cannot ensure the operating safety of the vehicle if they are mounted.< Your MINI dealer will be glad to inform you about the correct wheel and tire combination for your vehicle. The correct combination of wheels and tires is also necessary to ensure reliable operation of various vehicle systems such as ABS and DSC. To maintain good handling and vehicle response, use only tires of a single brand and tread configuration. After a tire has been dam- aged, mount the previous wheel and tire combi- nation again as soon as possible.
Wheels with Tire Pressure Monitor TPM electronics When mounting new tires or changing over from summer to winter tires, or vice versa, only use wheels with TPM electronics; otherwise, the Tire Pressure Monitor may not be able to detect a
Online Edition for Part no. 01402917368 - © 10/12 BMW AG Wheels and tires
MOBILITY
puncture, refer to page 78. Your MINI dealer will be glad to advise you.
Recommended tire brands
For each tire size, the manufacturer of your MINI recommends certain tire brands. They are marked with a clearly visible MINI designation on the sidewall of the tire. When properly used, these tires meet the high- est standards in terms of safety and handling characteristics.
Run-flat tires When mounting new tires or changing over from summer to winter tires and vice versa, mount run-flat tires for your own safety. Keep in mind that no space-saver spare tire is available in the event of a flat. Your MINI dealer will be glad to advise you.
Special characteristics of winter tires The manufacturer of your MINI recommends the use of winter tires on snowy roads or if temper- atures drop below 457/+76. Although all- season M+S tires provide better winter traction than summer tires, they generally fail to provide the same levels of cold-weather performance as winter tires.
Pay attention to speed
Always comply with the speed limit for the winter tires mounted on your car; failure
to do so could result in tire damage and acci- dents.<
If the car is capable of speeds higher than that permitted for the winter tires, a label stating the maximum permitted speed for the mounted tires must be displayed in your field of view. This label is available at your tire dealer or MINI dealer.
Storage Always store wheels and tires in a cool, dry place with as little exposure to light as possible. Always protect tires against all contact with oil, grease and fuels. Do not exceed the maximum tire inflation pres- sure indicated on the side wall of the tire.
Swapping wheels among the axles Depending on the individual use, front and rear tires may exhibit different wear and tear. In order to maintain an even wear and tear, the wheels may be rotated between the axles. Your MINI dealer will be glad to advise you. Always check the inflation pressure after the tire rotation, if necessary change the pressure.
Snow chains Only certain types of fine-link snow chains have been tested by the manufacturer of your MINI, classified as road-safe and recommended. Con- tact your MINI dealer for more details. Only attach snow chains in pairs to the front wheels with the following tires. > 195/60 R 16 M+S Observe the manufacturer's instructions when mounting snow chains. Do not exceed a speed of 30 mph or 50 km/h.
Do not initialize the Flat Tire Monitor if snow chains are mounted; otherwise, the
instrument might issue an incorrect reading. When driving with snow chains, it can be useful to briefly deactivate DSC or activate DTC, refer to page 73.<
213
Online Edition for Part no. 01402917368 - © 10/12 BMW AG MOBILITY
Engine compartment
Engine compartment
Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems.
General information
Never attempt to perform any service or repair operations on your vehicle without
the required professional technical training. If you do not know how to follow the specified instructions, then have the work carried out by your MINI dealer. If this work is not carried out properly, there is a danger of subsequent dam- age and related safety hazards.<
Important parts of the engine compartment
1 Vehicle identification number 2 Battery, under the cover 237
3 Engine oil dipstick 215
4 Engine oil filler neck 2165 Coolant expansion tank 217
6 Engine compartment fuse box 234
7 Reservoir for washer fluid for the headlampand window washer system 57
214
Online Edition for Part no. 01402917368 - © 10/12 BMW AG Engine compartment
MOBILITY
Closing
Hood
Releasing
Pull the lever.
Do not clean the windshield and head- lamps if the hood is unlocked as this may
damage the headlamp washer system.<
Opening
To avoid damage, make sure that the wiper arms are against the windshield
before you open the hood.< Press the release handle and open the hood.
Close the hood from a height of approx. 16 in/ 40 cm with momentum. It must be clearly heard to engage.
If you notice any signs while driving your vehicle that the hood is not completely
closed, stop at once and close it securely. Make sure that the closing path of the hood is clear; otherwise, injuries may result.<
Engine oil Engine oil consumption depends on driving style and operating conditions, e.g., with a very sporty driving style, the engine oil consumption is significantly increased. Therefore, check the engine oil level regularly after each refueling.
Checking engine oil level 1. With the vehicle's engine at normal operat-
ing temperature, i.e. after uninterrupted driving for at least 6 miles/10 km, park the vehicle on a level surface.
2. Switch off the engine. 3. Pull the dipstick out after approx. 5 minutes and wipe it off with a lint-free cloth, paper towel or similar material.
4. Carefully push the dipstick all the way into
the guide tube and pull it out again. The oil level should be between the two marks on the dipstick.
215
Online Edition for Part no. 01402917368 - © 10/12 BMW AG MOBILITY
Engine compartment
Oil types for refilling
Notes
Do not use oil additives as this could result in engine damage.< When choosing oil, make sure that it belongs to one of the SAE viscosity classes
0W-40, 0W-30, 5W-40 and 5W-30; otherwise, malfunctions and damage to the engine may result.< The engine oil quality is critical for the life of the engine. Some types of oil may not be available in every country.
Approved oil types
Gasoline engines
BMW High Performance SAE 5W-30
BMW Longlife-01
BMW Longlife-01 FE
Additional information on approved types of oil can be found at a MINI dealer.
Alternative oil types If the approved engine oils are not available, up to 1 US quart/1 liter of another oil with the fol- lowing specification may be used:
Gasoline engines
API SM or higher specifications
The oil quantity corresponding to the difference between the two marks on the dipstick is 1 US quart/1 liter.
Do not fill beyond the upper mark on the dipstick. Excess oil will damage the
engine.<
Adding engine oil
Do not add the maximum quantity of 1 US quart/1 liter of engine oil until the oil level has dropped to just above the lower mark on the dipstick, page 215.
Add oil within the next 30 miles/50 km; otherwise, the engine could be dam-
aged.<
If too much motor oil is added, immedi- ately have the vehicle checked; otherwise,
damage to the engine may result.<
Keep oils, grease, etc. out of the reach of children and comply with the warnings on the containers. Otherwise, health hazards may result.<
216
Online Edition for Part no. 01402917368 - © 10/12 BMW AG Engine compartment
MOBILITY
Oil change Only MINI dealers are to perform oil changes.
Topping off 1. Turn the cap of the expansion tank a little
Coolant Coolant consists of half water and half additive. Not all commercially available additives are suit- able for your MINI. Your MINI dealer knows which additives are suitable and will be glad to advise you.
Only use suitable additives; otherwise, engine damage may result. Because addi- tives are harmful to your health, it is important to follow the instructions on the containers.<
Comply with the appropriate environmen- tal protection regulations when disposing
of coolant additives.<
Coolant temperature A warning lamp will come on if the coolant, and therefore the engine, becomes too hot. A message appears on the Control Display.
Checking coolant level
Do not add coolant to the cooling system when the engine is hot. Escaping coolant
can cause burns.< Do not open the hood until the engine has cooled down.
The coolant level is correct if it is between the Min and Max markings.
counterclockwise to allow any accumulated pressure to escape, then continue turning to open.
2. Slowly fill to the correct fluid level; do not
overfill.
3. Close by turning the cap. Have the reason for the coolant loss eliminated as soon as possible.
217
Online Edition for Part no. 01402917368 - © 10/12 BMW AG MOBILITY
Maintenance
Maintenance
Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems.
MINI Maintenance System
The MINI Maintenance System supports the preservation of the traffic and operating safety of your MINI. The objective is to optimize efforts with respect to minimal vehicle maintenance costs. If and when you come to sell your MINI, a com- prehensive record of servicing will prove a signif- icant benefit.
Condition Based Service CBS Sensors and special algorithms take the different driving conditions of your MINI into account. Condition Based Service uses this to determine the current and future service requirements. By letting you define a service and maintenance regimen that reflects your own individual requirements, the system builds the basis for trouble-free driving.
218
On the Control Display, you can have the remaining times or distances for selected main- tenance tasks and any legally prescribed dates displayed, page 64.
Service data in the remote control Your vehicle continuously stores service- requirement information in the remote control while you are driving. Your MINI dealer can read out this data from the remote control unit, and propose an optimized maintenance approach. Whenever you take your car in for servicing you should therefore hand your MINI dealer the remote control unit that you last used.
Make sure that the date is always set cor- rectly, page 67; otherwise, the effective-
ness of Condition Based Service CBS is not assured.<
Service and Warranty Information Booklet for US models and Warranty and Service Guide Booklet for Canadian models Please consult your Service and Warranty Infor- mation Booklet for US models and Warranty and Service Guide Booklet for Canadian models for additional information on service requirements.
The manufacturer of the MINI recom- mends that you have service and repair
operations performed at your MINI dealer. Take the time to ensure that these service pro- cedures are confirmed by entries in your vehi- cle's Service and Warranty Information Booklet for US models and Warranty and Service Guide Booklet for Canadian models. These entries ver- ify that your vehicle has received the specified regular maintenance.<
Online Edition for Part no. 01402917368 - © 10/12 BMW AG Maintenance
MOBILITY
Socket for On-Board Diagnosis OBD
The primary components that make up the emissions can be checked by a device via the OBD socket.
Emissions
The warning lamps come on. The vehicle is producing higher emissions. You can continue your journey, but moderate your speed and exercise due caution.
Have the car checked as soon as possible. Under certain circumstances, one of the lamps will flash or light up continuously. This indicates excessive misfiring or a malfunction in the engine. If this happens, reduce your speed and visit the nearest MINI dealer as soon as possible. Severe misfiring can quickly lead to serious dam- age of emissions-related components, espe- cially the catalytic converter. In addition, mechanical engine components can become damaged.
If the fuel cap is not properly tightened, the OBD system may conclude that fuel vapors are escaping, causing an indica- tor to light up. If the fuel cap is then tightened, the indicator should go out within a few days.
219
Online Edition for Part no. 01402917368 - © 10/12 BMW AG MOBILITY
Care
Care
Vehicle equipment In this chapter, all production, country, and optional equipment that is offered in the model range is described. Equipment is also described that is not available because of, for example, selected options or country version. This also applies to safety related functions and systems.
