X Select Memory and press W to confirm. X Select the preset by turning cVd or sliding
ZVÆ the COMAND controller.
X Press and hold W the COMAND controller
until the area is entered in the selected preset.
X To store rapidly: in the daily forecast
(Y page 197) press and hold a number key, e.g. l, until the preset position number is shown in the status bar in front of the area name.
i You can also use this function in the five-
day forecast (Y page 197), and in the detailed information view (Y page 197).
Selecting an area from the weather
memory
X From the weather memory: in the
information chart, select Position by turning cVd the COMAND controller and press W to confirm.
X Select Memory and press W to confirm.
X Select a preset that contains an entry by
turning cVd or sliding ZVÆ the COMAND controller and press W to confirm. The weather data of the selected area is shown.
X Rapid selection: if there is an entry
available in the weather memory, e.g. when
X Select a state, e.g. Florida, and confirm
by pressing W.
X Select a category, e.g. Daytona Beach,
and press W to confirm. The information chart shows the weather forecast for the selected area. The data is supplied by the nearest weather station.
Option 2: selecting the area in the
weather map
X Call up the weather map (Y page 200).
X Move the weather map so that the
crosshair is over the desired area (Y page 200).
X Press W the COMAND controller.
The information chart shows the weather forecast for the selected area. The data is supplied by the nearest weather station.
200 SIRIUS Weather
the daily forecast is shown, briefly press a number key, such as l. The weather data of the selected area is shown.
Weather map
Calling up the weather map
X Select Map in the information chart by
turning cVd the COMAND controller and press W to confirm. The weather map appears in the 500 km scale.
Showing/hiding the menu in the
weather map
X To show: press W the COMAND controller
in the weather map.
Weather map (example)
i For the map display, you can activate the
topographic map style (Y page 103).
Moving the weather map
X Slide XVY, ZVÆ or aVb the COMAND
controller. The weather map moves in the corresponding direction under the crosshair.
Changing the scale
X As soon as you turn cVd the COMAND
controller, you see the scale bar.
X Turn cVd until the desired scale is set.
X To hide: slide up ZV the COMAND
controller.
Selecting a weather station in the map
X Move the weather map and crosshair to the
desired position (Y page 200).
X Press W the COMAND controller.
The menu is shown.
X Confirm Display Weather by pressing
W. COMAND receives the weather data for the selected position from the nearest weather station and displays it automatically as a daily forecast.
SIRIUS Weather
201
Switching layers on the map on/off
You can switch on differing layers, for example to display the rain radar, weather fronts and the course of tropical storms on the map.
X Display the menu on the weather map (Y page 200). X Select Layers by turning cVd the COMAND controller and press W to confirm.
A menu appears.
X Select the layer by turning cVd and sliding ZVÆ the COMAND controller and press W to
confirm. Switch the display on O or off ª.
Explanation
Layer
Map display
Radar Map
Shows the rain radar as a colored area on the map, for an explanation of the colors, see the "Legend" section (Y page 204).
Storm
Shows the characteristics of a storm
Characteristic
Characteristics are:
Rtornadic storm:
storm cell with strong winds (super cells), from which a tornado (also know as twister) can develop.
Rcyclone:
storm cells, from which a tornadic storm can develop
Rhailstorm
Rthe likelihood of a hailstorm
Selectable
scales
All
All
Atmospheric
Pressure
Shows the position of high and low-pressure areas (H, L), weather fronts and isobars
200 km, 500 km
202 SIRIUS Weather
Layer
Map display
Selectable
scales
Tropical
Storm Tracks
Shows the path/directional movement speed of a tropical storm with time and strength information
All
Winds
Shows the wind direction and wind speed
5 km
There are a number of illustrated examples in the following section.
Sample displays of weather data in the
map
Rain radar
The Radar Map display layer is activated (Y page 201) and weather data is available.
Weather map showing the rain radar
The precipitation radar legend can be called up at (Y page 204).
Storm characteristics
The Storm Characteristics display layer is activated (Y page 201) and weather data is available.
Weather map showing a hailstorm and tornadic storms with the path and directional movement speed (example)
Weather map showing a hailstorm (example)
The storms legend can be called up (Y page 204).
Displaying additional information
X Slide XVY, ZVÆ or aVb the COMAND controller and move the crosshair onto a corresponding symbol.
X Press W the COMAND controller.
SIRIUS Weather
203
Weather map with information on a cyclone (example)
The following information is shown (if available):
Weather fronts (legend) : Cold front (blue line with blue triangles)
; Warm front (red line with red semi-circles)
= Stationary front (red-blue line with red
Rcategory of the tropical storm
semi-circles and blue triangles)
Rdate and time of observation (time stamp)
? Occlusion (violet line with a violet semi-
Rdirectional movement speed and path
circle and triangles)
i The directional movement speed is the
Weather
Explanation
speed at which the storm cell moves.
front
Weather fronts
Cold front
The Atmospheric Pressure display layer is activated (Y page 201) and weather data is available.
If a cold front moves in, the weather remains changeable and there are often rain showers and thunderstorms. The air temperature decreases.
Warm front This can mean longer periods
of rain and can lead to an increase in cloud cover and a slow increase in temperature.
Stationary front
The weather front moves minimally. The weather remains changeable in this area.
Weather map showing the position of high and low- pressure areas (H, L), weather fronts and isobars (example)
Occlusion
i Isobars are lines that show where the air
pressure is the same.
This occurs when a faster cold front reaches an advancing warm front and combines with it. The weather remains changeable and rainy within an occlusion.
204 SIRIUS Weather
Path of tropical storms
The Tropical Storm Tracks display layer is activated (Y page 201) and weather data is available. Symbol ? shows the current position of the tropical cyclone.
A dashed line shows the path to date and the predicted path of the cyclone. More information ; can be shown on the following positions:
Rpositions of previous path = Rcurrent position ?
Rpositions on the predicted route with
information on date :
X In the map, slide XVY, ZVÆ or aVb the
COMAND controller and slide the crosshair to ; or =.
X Press W the COMAND controller.
Region of
Category
origin
Atlantic, North and South Pacific Oceans
Tropical Low
Pressure System
Tropical Rain Zone
Tropical Storm
Hurricane Category 1
to Hurricane Category
Northwest Pacific
Tropical Low
Pressure System
Tropical Cyclone
Typhoon
Super-Typhoon
Wind directions and wind speeds
Weather map showing the path of a tropical low- pressure area and further information (example)
Weather map showing wind directions and wind speeds (example)
Showing information ; (if available):
Rname of the tropical storm and category
Rtime stamp
Rdirectional movement speed and path
(Wind)
Rmaximum wind speed (Max. Wind Speed)
i The directional movement speed is the
speed at which the storm cell of a tropical storm moves.
A tropical storm is separated into different categories according to the location at which it develops.
Legend (precipitation radar and storms)
X Display the menu on the weather map
(Y page 200).
X Select Layers by turning cVd the
COMAND controller and press W to confirm.
X Select Legend and press W to confirm.
SIRIUS Weather
205
i The symbol for a tornadic storm is also
valid for a cyclone (mesocyclone).
Precipitation type Color scale
The time stamps correspond to the time at the vehicle's current position. The change over from summer time to standard time is performed automatically.
Changing to the information chart
X Display the menu on the weather map
(Y page 200).
X Select Display Weather and press W to
confirm.
Rain
Mixed
Snow
Seven color levels from light (light green) to heavy (red)
Light (light violet) to heavy (violet)
Light (light turquoise) to heavy (turquoise)
Time stamp
The time stamp shows when the weather data was created by the weather station.
X Display the menu on the weather map
(Y page 200).
X Select Layers by turning cVd the
COMAND controller and press W to confirm.
X Select Time stamp and press W to
confirm.
206
COMAND features ............................. 208
General information ......................... 208
Basic functions ................................. 213
System settings ................................ 215
Audio CD/DVD and MP3 mode ........ 216
Video DVD mode ............................... 221
Operation with an active COMAND
source ................................................ 225
AUX mode .......................................... 228
207
G WARNING Due to a potential choking hazard, wired headset usage by children should only occur with adult supervision.
Components
Overview
The Rear Seat Entertainment System is comprised of:
Rtwo rear-compartment screens behind the
front-seat head restraints
Rthe remote control
Ra CD/DVD drive
RAUX jacks on both screens (AUX display)
and on the CD/DVD drive (AUX drive)
Rtwo sets of cordless headphones
208 General information
COMAND features
These Operating Instructions describe all standard and optional equipment available for your COMAND system at the time of purchase. Country-specific deviations are possible. Please note that your COMAND system may not be equipped with all the features described.
General information
Important safety notes
G WARNING The RSE CD/DVD player is a Class 1 laser product. There is a danger of invisible laser radiation when you open or damage the cover.
Do not remove the cover. The RSE CD/DVD player does not contain any parts which can be serviced by the user. For safety reasons, have any necessary service work performed by qualified personnel.
G WARNING The driver should not wear a Rear Seat Entertainment headset while operating the vehicle under any circumstances. The use of a headset while driving the vehicle could drastically impair the ability to react to audible traffic conditions (e.g. emergency sirens from police/fire/ambulance, another car's horn, etc.).
G WARNING When not in use, headsets or external video sources should be stored in a safe location (e.g. one of the vehicle's storage compartments) so that they are not loose within the passenger compartment during braking, vehicle maneuvers or a traffic accident. Objects moving within the passenger compartment could cause serious personal injury to vehicle occupants.
General information 209
Rear-compartment screens
: AUX jacks, detailed view in the "CD/DVD drive and AUX jacks" section (Y page 210)
; Display
Remote control
Overview
i Two remote controls are included in the scope of supply for the USA and Canada.
: Switches the screen on/off
; Switches the button lighting on/off
= Selects the screen for the remote control
? Selects a menu or menu item
210 General information
A Confirms a selection or setting
Switching the button lighting on/off
B Switches sound on/off (for corded
headphones)
C Adjusts the volume (for corded
headphones)
D Skips to a track, fast-forward/fast-rewind
E Selects a track; direct entry
F Exits a menu (back)
X Press button ; on the remote control. Depending on the previous status, the button lighting is switched on or off.
i If you do not use the remote control for
about 15 seconds, the button lighting switches off automatically.
Selecting the screen for the remote
headphones only)
Switching the sound on/off (corded
control
You can use the remote control to operate one of the two rear screens at a time. To do so, you must switch the remote control to the desired screen.
X To select the left-hand screen: turn
thumbwheel = until "L REAR" is highlighted in the window.
X To select the right-hand screen: turn
thumbwheel = until "REAR R" is highlighted in the window.
Switching the screen on/off
If the SmartKey is in position 0 or 1 in the
ignition lock (see the vehicle Operator's
Manual), or the SmartKey is not inserted, the
screens in the rear will switch off after 30
minutes. Before the screens switch off, they
show a message to this effect.
You can switch the screens back on. However, this will discharge the starter battery.
X Point the remote control at the rear- compartment screen which has been selected for remote operation.
X Press button : on the remote control.
The respective rear screen switches on or off.
i You can only switch the screens on using
the remote control if the ignition is switched on.
X Press button B on the remote control.
The sound is switched on/off.
Selecting a menu/menu item and
confirming your selection
X Select a menu/menu item using the =;9: buttons on the remote control and press the 9 button to confirm.
CD/DVD drive and AUX jacks
: CD/DVD slot
; AUX, right-hand (R) jack for audio signal
(red)
= AUX, left-hand (L) jack for audio signal
(white)
? AUX, video (V) jack (yellow)
A CD/DVD eject button
The AUX jacks shown are for the AUX drive. Identical jacks can be found on the right-hand side of the rear-compartment screens (AUX display), (Y page 209).
Cordless headphones
Overview
General information 211
: Volume control
; Selects a screen for the headphones
= Battery compartment cover
? Switches the cordless headphones on/off
A Indicator lamp with various displays (Y page 211)
X Open both sides of the headphones and adjust the fit of the headphones by pulling the
headphone band in the direction of the arrow.
Switching the cordless headphones
i If you have connected corded
on/off
X Press button ?.
Depending on the previous status, the headphones are switched on or off. To save the battery, the headphones are switched off automatically if they do not receive an audio signal within three minutes.
Adjusting the volume of the
headphones
X Turn volume control : until the desired
volume has been set.
headphones to a rear-compartment screen, you can adjust the volume by pressing buttons C on the remote control (Y page 209).
Selecting a screen for the headphones
X Move push slider ; to L (left-hand screen)
or R (right-hand screen).
Indicator lamp displays
The color of the indicator lamp shows whether the headphones are switched on or off and indicates the charge level of the batteries inserted.
212 General information
LED
display
Status
Green
The batteries are fine.
Red
The batteries are almost discharged.
Lit continuous ly
Flashing
The headphones are switched on and connected to a screen.
The headphones are searching for the connection to a screen.
No display (dark)
The headphones are switched off or the batteries are discharged.
Connecting additional headphones
You can connect one additional set of corded headphones to each of the two rear screens (Y page 209). The socket is designed for headphones with a 3.5 mm stereo jack plug and an impedance of 32 ohms.
Changing batteries
Notes
Batteries are required for the remote control and for the two sets of cordless headphones.
G WARNING Keep the batteries out of the reach of children. Consult a doctor immediately if a child should swallow a battery. Do not dismantle, short-circuit or burn a battery.
H Environmental note Dispose of discharged batteries in an environmentally responsible manner.
On the remote control
: Battery compartment
; Catch tab
= Battery compartment cover
? Retaining lugs
A Batteries
The remote control contains 2 type AAA, 1.5 V batteries.
X To open the battery compartment:
remove battery compartment cover = on the back of the remote control.
X To do so, press down catch tab ; and remove battery compartment cover =.
X Remove discharged batteries A from the
tray.
X Insert the new batteries. Observe the polarity markings on the batteries and battery compartment when doing so. Left-hand battery: the positive pole (+) must face upwards.
Right-hand battery: the positive pole (+) must face downwards.
X To close the battery compartment: insert battery compartment cover = starting with retaining lugs ? into the battery compartment and allow catch tab ; to engage in place.
On the cordless headphones
The battery compartment cover is located on the left headphone.
Basic functions
213
Right-hand battery: the positive pole (+) must face downwards.
X To close the battery compartment:
press battery compartment cover downwards until it engages into place. If the batteries have been inserted correctly, the indicator lamp will light up green when the headphones are switched on.
Basic functions
Using headphones
You can use the cordless headphones supplied and/or up to two sets of corded headphones connected to the corresponding jack of the rear-compartment screens (Y page 209).
Information on:
Rswitching the cordless headphones on/off
Radjusting the volume of the headphones
Rselecting a screen for the headphones
can be found in the Cordless headphones section (Y page 211).
: Battery compartment cover
Using the main loudspeakers
The cordless headphones contain 2 type AAA, 1.5 V batteries.
This function is available in conjunction with COMAND.
X To open the battery compartment: flip battery compartment cover : upwards. As you do so, hold the left-hand side of the headphones as shown to prevent the batteries from falling out.
You can use the vehicle loudspeakers to listen to a disc inserted in the rear- compartment drive. To do so, at least one of the rear-compartment screens must be set to disc mode.
X Remove the discharged batteries from the
X To set using COMAND: press, for
tray.
X Insert the new batteries. Observe the polarity markings on the batteries and battery compartment when doing so. Left-hand battery: the positive pole (+) must face upwards.
example, the $ function button to switch on an audio mode.
X Select Audio by sliding ZV the COMAND
controller and press W to confirm. The Audio menu appears.
X Select Rear Audio by turning cVd the
COMAND controller and press W to confirm.
214 Basic functions
i The headphones' volume setting does not
affect the main loudspeakers.
The following functions affect only one screen:
Adjusting the sound settings
Raudio and video functions as well as picture
settings
Rswitching between full screen and the
You can select the sound settings in the audio CD/DVD/MP3, video DVD and AUX modes.
menu
X Switch on an operating mode (e.g. audio
Switching between operating modes
CD mode) (Y page 217).
X Select Treble or Bass using
the :=; buttons on the remote control and press the 9 button to confirm. An adjustment scale appears.
X Select a setting using the 9:
buttons and press the 9 button to confirm.
Multiple users
Simultaneous use of the rear-
compartment disc drive
The two rear-compartment screens can be operated almost entirely independently from one another. However, there can be a conflict in some menus if the two screens are used simultaneously.
If the rear-compartment disc drive is being used for both screens simultaneously, selecting certain menus or settings on one of the screens also affects the other screen.
When you exit an operating mode (e.g. audio CD mode), the current setting is saved. If you call up this operating mode again later, there are two possibilities:
Rthe operating mode has been changed on
the other screen.
Rthe operating mode has not been changed.
In the first case, the operating mode appears as it is on the other screen.
In the second case, the setting appears on the screen as it was when you last exited the operating mode.
Picture settings
Overview
You can select these settings in video DVD and AUX mode. Instructions for AUX mode are detailed later (Y page 228).
Adjusting the brightness, contrast and
The following functions affect both screens:
color
Rchanging playback options
Rselecting a track (from atra ck list or folder)
Rusing the play, pause and stop functions
X Switch on video DVD mode (Y page 221). X To show the menu: press the 9 button
on the remote control.
Rfast forwarding/rewinding or scrolling
or
Rcalling up the DVD menu and navigating
within it
Rsetting the language, subtitles and camera
X Select (Y page 188)Menu while the
navigation menu is shown and press the 9 button to confirm.
angle
Rcalling up interactive DVD content
X Select DVD-Video using
the :=; buttons and press the 9 button to confirm.
System settings
215
the other screen. You make these settings using the remote control (Y page 209).
Selecting the display language
X Select System using the 9=; button on the remote control and press 9 to confirm. You see the system menu on the selected rear screen.
X Select Settings with the : button and
press the 9 button to confirm.
X Select Language using the 9:
buttons and press the 9 button to confirm. The list of languages appears. The # dot indicates the current setting.
X Select alanguage using the 9:
buttons and press the 9 button to confirm. The Rear Seat Entertainment System activates the selected language.
Switching the display design
X Select Settings with the : button and
press the 9 button to confirm.
X Select Day Mode, Night Mode or
Automatic using the 9: buttons and press the 9 button to confirm. The dot indicates the current setting.
Design
Explanation
Day Mode
The display is set permanently to day design.
The display is set permanently to night design.
The display design changes depending on the vehicle instrument cluster illumination.
Example: TV mode : Brightness, contrast and color
; Picture formats
X Select Brightness, Contrast or Color
using the 9: buttons and press the 9 button to confirm. An adjustment scale appears.
X Select a setting using the 9:
buttons and press the 9 button to confirm.
Changing the picture format
X To show the menu: press the 9 button
on the remote control.
or
X Select (Y page 188)Menu while the
navigation menu is shown and press the 9 button to confirm.
X Select DVD-Video using
the :=; buttons and press the 9 button to confirm. The dot in front of one of the menu items 16:9 Optimized, 4:3 or Widescreen indicates the format currently selected.
X Select a format using the 9:
buttons and press the 9 button to confirm.
Night Mode
System settings
Automatic
Note
You can adjust almost all system settings individually for each screen without affecting
216 Audio CD/DVD and MP3 mode
Setting the brightness
General information
X Select Settings with the : button and
press the 9 button to confirm.
You will find information on the following topics in the Audio section:
X Select Brightness using the 9:
Rnotes on CDs/DVDs (Y page 165)
buttons and press the 9 button to confirm. A scale appears.
Rnotes on MP3 mode (Y page 164)
Rnotes on copyright (Y page 165)
X Adjust the brightness using the 9: buttons and press the 9 button to confirm. The brightness bar moves up or down. The picture becomes lighter or darker in accordance with the scale.
Showing/hiding the picture
X To hide the picture: select Display Off
in the system menu using the :; buttons on the remote control and press the 9 button to confirm. The picture is hidden.
X To display the picture: press the 9
button.
Inserting a CD/DVD
Depending on the model and the vehicle equipment, the CD/DVD drive is located:
Rbehind the center console in a folding
compartment, or
Rin the center under the rear seats, or
Rin the armrest between the rear seats
Audio CD/DVD and MP3 mode
Safety note
G WARNING The RSE CD/DVD player is a Class 1 laser product. There is a danger of invisible laser radiation when you open or damage the cover.
Do not remove the cover. The RSE CD/DVD player does not contain any parts which can be serviced by the user. For safety reasons, have any necessary service work performed by qualified personnel.
: Disc slot
; Disc eject button
The CD/DVD drive is a single disc drive. If there is already a disc inserted, this must be ejected before another is inserted.
X Insert adisc into the disc slot.
The printed side of the disc must face upwards. If neither side of the disc is printed, the side you wish to play must face downwards. The CD/DVD drive draws in the disc.
Audio CD/DVD and MP3 mode 217
The CD/DVD drive plays the disc:
Rif it has been inserted correctly and is a
permissible disc, and
Rafter you have switched on disc mode
(audio CD/audio DVD/MP3 mode) (Y page 217).
Data on an MP3 CD first needs to be loaded by the drive. Loading may take some time, depending on the number of folders and tracks.
Removing a CD/DVD
X Press the þ button.
The drive ejects the disc.
X Take the disc out of the slot.
If you do not take the disc out of the slot, the drive will draw it in again automatically after a short while.
Switching to audio CD, audio DVD or
MP3 mode
X Insert a CD/DVD (Y page 216).
The Rear Seat Entertainment System loads the inserted disc.
X Select Disc in the menu using the
9=; buttons on the remote
control and confirm by pressing the 9
button.
The corresponding mode is switched on.
The Rear Seat Entertainment System plays
the disc.
Example: audio CD mode : Type of data medium _
; Track number
= Track name (only if stored on the disc as
CD text)
? Track time
A Graphic time and track display
B Current playback settings (no symbol for
"Normal track sequence")
C To set the bass
D To set the treble
E Disc name (if stored on the disc as CD
text)
F To call up the track list
G Playback options
Example: audio DVD mode : Type of data medium ü
; Track number
= Track name (if stored on the disc)
? Track time
A Graphic time and track display
B Current playback settings (no symbol for
"Normal track sequence")
218 Audio CD/DVD and MP3 mode
C To set the bass
D To set the treble
E Disc name (if stored on the disc)
F To call up the track list
G Stop function
H Pause function
I Playback options
Example: MP3 mode : Type of data medium þ
; Track number
= Track name
? Track time
A Graphic time and track display
B Current playback settings (no symbol for
"Normal track sequence")
C To set the bass
D To set the treble
E Disc name or current folder
F To call up the folder list
G Playback options; to switch track
information on/off
i Variable bit rates in MP3 tracks can result in the elapsed time shown being different from the actual elapsed time.
Selecting a track
Selecting by skipping to a track
X To skip forwards or backwards to a
track: press the = or ; button on the remote control.
or X Press the E or F button.
The skip forward function skips to the next track.
Skipping backwards restarts the current track (if it has been playing for more than eight seconds) or starts the previous track (if the current track has only been playing for a shorter time).
If you have selected the playback options Random Tracks or Random Folder, the track order is random.
Selecting by track list
In audio CD mode, the track list contains all tracks on the disc currently playing.
In audio DVD mode, the track list contains all tracks in the currently active group; see "Setting the audio format" (Y page 163).
In MP3 mode, the track list shows all tracks in the currently active folder as well as the folder structure, allowing you to select any track on the MP3 CD.
X Select Tracks (audio CD/DVD mode) or
Folder (MP3 mode) using
the :=; buttons on the remote
control, and confirm by pressing the 9
button.
or X Press the 9 button when the display/
selection window is selected. The track list appears. The # dot indicates the current track.
X Select a track using the9: buttons
and press the 9 button to confirm.
Audio CD/DVD and MP3 mode 219
: Folder selection symbol
; Current folder name
= Track symbol
X To switch to the superordinate folder:
select icon : using the9: buttons
on the remote control and press the 9
button to confirm.
The display shows the next folder up.
Making a selection by entering the track
number directly
X Press the h button on the remote
control. The track entry display appears.
Example: track 2
X Press number button 2.
Example: track 12
X Press the corresponding number keys in
rapid succession.
i It is not possible to enter numbers that
exceed the number of tracks on the CD or in the currently active folder.
X Wait for approximately three seconds after
making the entry. You will hear the track which has been entered. The corresponding basic menu then reappears.
Fast forwarding/rewinding
X With the display/selection window active,
press the = or ; button on the remote control repeatedly until you reach the desired position.
or X Press and hold the E or F button
until the desired position is reached.
: Folder selection symbol
Selecting a folder
This function is only available in MP3 mode.
X Select Folder in MP3 mode using
the :=; buttons on the remote controller and press the 9 button to confirm.
or X Press the 9 button when the display/
selection window is selected. The folder content appears.
; Folder icon
X Select a folder using the9: buttons
and press the 9 button to confirm. You will see the tracks in the folder.
X Select a track using the9: buttons
and press the 9 button to confirm. The track is played and the corresponding folder is now the active folder.
Pause function
This function is only available in audio DVD mode.
220 Audio CD/DVD and MP3 mode
X To pause playback: select Ë using
X Select an audio format using the
the :=; buttons on the remote control and press the 9 button to confirm. The Ë display changes to Ì.
9: buttons and press the 9 button to confirm.
X To exit the menu: press the =
X To continue playback: select Ì and
press the 9 button to confirm. The Ì display changes to Ë.
or ; button.
Playback options
Further information on playback options is available in the "Audio" section (Y page 163).
X Select CD, DVD-A or MP3 using
the :=; buttons on the remote control and press the 9 button to confirm. The options list appears. The # dot indicates the option currently selected.
X Select Normal Track Sequence, Random
Tracks or Random Folder using the 9: buttons and press the 9 button to confirm. The option is switched on. For all options except Normal Track Sequence, you will see a corresponding display in the display/ selection window.
i If you change the disc, the Normal Track Sequence option is activated automatically. If an option is selected, it remains selected after the Rear Seat Entertainment System is switched on or off.
Switching track information on/off
(MP3 mode only)
If the function is switched on, folder and track names are displayed.
If the function is switched off, disc and file names are displayed. X Select MP3 using the :=;
buttons on the remote controller and press the 9 button to confirm.
Stop function
This function is only available in audio DVD mode. X To interrupt playback: select É using the :=; buttons on the remote control and press the 9 button to confirm. The Ë display changes to Ì.
X To continue playback: select Ì and
press the 9 button to confirm. Playback continues from the point where it was interrupted.
X To stop playback: while playback is
interrupted, select É again and press the 9 button to confirm. Playback stops and returns to the beginning of the DVD. Ì is highlighted.
X To restart playback: select Ì and
press the 9 button to confirm. Playback starts from the beginning of the DVD.
Setting the audio format
Further information on audio formats is available in the "Audio" section (Y page 163). X Select DVD-A using the :=;
buttons on the remote controller and press 9 to confirm.
X Select Group using the 9: buttons
and press the 9 button to confirm. The list of available audio formats appears. The # dot indicates the format currently selected.
Video DVD mode 221
Switching to video DVD mode
X Insert a video DVD.
The Rear Seat Entertainment System loads the disc.
If disc mode was the last mode selected, it will now be active.
If it was not, switch on video DVD mode as described in the following instruction.
X Select Disc in the menu using the
9=; buttons on the remote
control and confirm by pressing the 9
button.
If the video DVD fulfills the playback
criteria, the film either starts automatically
or the menu saved on the DVD appears. If
the DVD menu appears, you must start the
film manually.
X Select the corresponding menu item in the
DVD menu.
Hiding/showing the navigation menu
X To show: press the 9 or : button
on the remote control.
X To hide: press the 9 or : button.
or
X Wait for approximately eight seconds.
X Select Display Track Information
using the 9: buttons and press the 9 button to confirm. The function is switched on O or off ª, depending on the previous status.
Video DVD mode
General information
Here you will find further information on the following topics:
Rsafety notes (Y page 154)
Rnotes on DVDs (Y page 186)
DVD playback conditions
Playback problems may occur when playing copied discs. There is a large variety of discs, DVD authoring software, writing software and writers available. This variety means that there is no guarantee that the Rear Seat Entertainment System will be able to play video DVDs that you have copied yourself.
You will find further information in the Video section (Y page 187). Information regarding COMAND also applies to the Rear Seat Entertainment System.
Function restrictions
Depending on the DVD, it is possible that certain functions or actions described in this section will be temporarily blocked or may not function at all. As soon as you try to activate these functions or actions, you will see the K symbol in the display.
Inserting and removing a CD/DVD
X Proceed as described in the "Audio CD/
DVD and MP3 mode" section (Y page 216).
Navigation menu : Disc type
; Current title
= Current scene
222 Video DVD mode
? Track time
A To show the menu
Showing/hiding the menu
X To show: press the 9 button on the
remote control.
or
X Select Menu while the navigation menu is
shown and press the 9 button to confirm.
X To hide: press the 9 button, select
Full Screen and press the 9 button to confirm.
Menu system : Video DVD options
; Pause function
= Stop function
? To set the treble
A To set the bass
Fast forwarding/rewinding
X Press and hold theE orF button on
the remote control until the desired position has been reached. You see the navigation menu.
Pause function
X To show the menu: press the 9 button
on the remote control.
or
X Select Menu while the navigation menu is
shown and press the 9 button to confirm.
X To pause playback: selectË and press
the 9 button to confirm. The Ë display changes to Ì.
X To continue playback: select Ì and
press the 9 button to confirm. The menu is hidden.
Stop function
X To show the menu: press the 9 button
on the remote control.
or
X Select Menu while the navigation menu is
shown and press the 9 button to confirm.
X To interrupt playback: select É and
press the 9 button to confirm. The Ë display changes to Ì. The video image is hidden.
X To continue playback: select Ì and
press the 9 button to confirm. Playback continues from the point where it was interrupted. The menu is hidden.
X To stop playback: while playback is
interrupted, select É again and press the 9 button to confirm. Playback stops and returns to the beginning of the DVD. Ì is highlighted.
X To restart playback: select Ì and