Tires BA: 245/40 R18 97 V XL M+S
Wheel and tire combinations
405
Alloy wheels
FA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
Alloy wheels
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
Alloy wheels
BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
Winter tires
R17
Tires
BA: 245/45 R17 99 H XL M+Si BA: 8.0 J x 17 H2
Alloy wheels
BA: 245/45 R17 99 H XL
M+SiMOExtended3
Wheel offset: 1.89 in (48 mm)
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
3 MOExtended tires (tires featuring run-flat characteristics) only in combination with an activated tire pressure
loss warning system or tire pressure monitor.
406 Wheel and tire combinations
Tires
BA: 245/45 R17 99 H XL M+Si BA: 8.5 J x 17 H2
Alloy wheels
BA: 245/45 R17 99 H XL
M+SiMOExtended3
Wheel offset: 1.89 in (48 mm)
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
R18
Tires
BA: 245/40 R18 97 H XL M+Si RA: 8.5 J x 18 H2
Alloy wheels
Wheel offset: 1.89 in (48 mm)
E 350
Summer tires
R18
Tires
BA: 245/40 R18 97 Y XL
FA: 245/40 R18 97 Y XL RA: 265/35 R18 97 Y XL
All-weather tires
R17
Tires
BA: 245/45 R17 99 H XL M+S
BA: 245/45 R17 95 H XL
M+SMOExtended3
BA: 245/45 R17 99 H XL M+S
BA: 245/45 R17 95 H XL
M+SMOExtended3
Alloy wheels
FA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
FA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
RA: 9.0 J x 18 H2
Wheel offset: 2.13 in (54 mm)
Alloy wheels
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
3 MOExtended tires (tires featuring run-flat characteristics) only in combination with an activated tire pressure
loss warning system or tire pressure monitor.
Wheel and tire combinations
407
R18
Tires
BA: 245/40 R18 97 V XL M+S
FA: 245/40 R18 97 V XL M+S RA: 265/40 R18 97 V XL M+S
Alloy wheels
BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
FA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
RA: 9.0 J x 18 H2
Wheel offset: 2.13 in (54 mm)
Winter tires
R17
Tires
BA: 245/45 R17 99 H XL M+Si BA: 8.0 J x 17 H2
Alloy wheels
BA: 245/45 R17 99 H XL
M+SiMOExtended3
BA: 245/45 R17 99 H XL M+Si BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 H XL
M+SiMOExtended3
Wheel offset: 1.89 in (48 mm)
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
R18
Tires
BA: 245/40 R18 97 H XL M+Si RA: 8.5 J x 18 H2
Alloy wheels
Wheel offset: 1.89 in (48 mm)
E 350 4MATIC
Summer tires
R184
Tires
BA: 245/40 R18 97 Y XL
Alloy wheels
FA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
3 MOExtended tires (tires featuring run-flat characteristics) only in combination with an activated tire pressure
loss warning system or tire pressure monitor.
4 Sedan only.
408 Wheel and tire combinations
All-weather tires
R17
Tires
BA: 245/45 R17 99 H XL M+S
BA: 245/45 R17 95 H XL
M+SMOExtended3, 4
BA: 245/45 R17 99 H XL M+S
BA: 245/45 R17 95 H XL
M+SMOExtended3, 4
R184
Tires
BA: 245/40 R18 97 V XL M+S
Alloy wheels
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
Alloy wheels
BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
Winter tires
R17
Tires
BA: 245/45 R17 99 H XL M+Si BA: 8.0 J x 17 H2
Alloy wheels
BA: 245/45 R17 99 H XL
M+SiMOExtended3
BA: 245/45 R17 99 H XL M+Si BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 8.0 J x 17 H2
Wheel offset: 1.89 in (48 mm)
BA: 245/45 R17 99 H XL
M+SiMOExtended3
Wheel offset: 1.89 in (48 mm)
BA: 8.5 J x 17 H2
Wheel offset: 1.89 in (48 mm)
R184
Tires
BA: 245/40 R18 97 H XL M+Si RA: 8.5 J x 18 H2
Alloy wheels
Wheel offset: 1.89 in (48 mm)
3 MOExtended tires (tires featuring run-flat characteristics) only in combination with an activated tire pressure
loss warning system or tire pressure monitor.
4 Sedan only.
Wheel and tire combinations
409
E 550 4MATIC
Summer tires
R18
Tires
BA: 245/40 R18 97 Y XL
All-weather tires
R18
Tires
BA: 245/40 R18 97 V XL M+S
Alloy wheels
FA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
Alloy wheels
BA: 8.5 J x 18 H2
Wheel offset: 1.89 in (48 mm)
Winter tires
R18
Tires
BA: 245/40 R18 97 V XL M+Si BA: 8.5 J x 18 H2
Alloy wheels
Wheel offset: 1.89 in (48 mm)
E 63 AMG S-MODEL 4MATIC
Summer tires
R19
Tires
FA: 255/35 ZR19 (96 Y) XL5
RA: 285/30 ZR19 (98 Y)XL2, 5
Alloy wheels
FA: 9.0 J x 19 H2
Wheel offset: 1.46 in (37 mm)
RA: 9.5 J x 19 H2
Wheel offset: 2.05 in (52 mm)
5 Observe notes on "Large wheels" under "General notes" in "Wheel/tire combinations". 2 Use of snow chains not permitted. Observe the notes under "Snow chains".
410 Emergency spare wheel
Winter tires
R19
Tires
FA: 255/35 R19 96 V XL M+Si5, 6
RA: 255/35 R19 96 V XL M+Si5, 6, 7
FA: 255/35 R19 96 V XL M+Si5
RA: 285/30 R19 98 V XL M+Si2, 5
Alloy wheels
FA: 9.0 J x 19 H2
Wheel offset: 1.46 in (37 mm)
RA: 9.5 J x 19 H2
Wheel offset: 2.05 in (52 mm)
FA: 9.0 J x 19 H2
Wheel offset: 1.46 in (37 mm)
RA: 9.5 J x 19 H2
Wheel offset: 2.05 in (52 mm)
Emergency spare wheel Important safety notes G WARNING The wheel or tire size as well as the tire type of the spare wheel or emergency spare wheel and the wheel to be replaced may differ. Mounting an emergency spare wheel may severely impair the driving characteristics. There is a risk of an accident. To avoid hazardous situations: Radapt your driving style accordingly and
drive carefully.
Rnever mount more than one spare wheel or emergency spare wheel that differs in size. Ronly use a spare wheel or emergency spare
wheel of a different size briefly.
Rdo not switch ESP® off. Rhave a spare wheel or emergency spare wheel of a different size replaced at the nearest qualified specialist workshop. Observe that the wheel and tire dimensions as well as the tire type must be correct.
When using an emergency spare wheel or spare wheel of a different size, you must not exceed the maximum speed of 50 mph (80 km/h). Snow chains must not be mounted on emergency spare wheels.
General notes You should regularly check the pressure of the emergency spare wheel, particularly prior to long trips, and correct the pressure as necessary (Y page 376). The applicable value is found on the wheel or under "Technical data" (Y page 414). An emergency spare wheel may also be mounted against the direction of rotation. Observe the time restriction on use as well as the speed limitation specified on the emergency spare wheel. Replace the tires after six years at the latest, regardless of wear. This also applies to the emergency spare wheel. i When you are driving with the collapsible
spare wheel mounted, the tire pressure loss warning system or the tire pressure
5 Observe notes on "Large wheels" under "General notes" in "Wheel/tire combinations". 6 Wagon: maximum permissible speed 220 km/h. 7 Only fine-link snow chains are permitted. 2 Use of snow chains not permitted. Observe the notes under "Snow chains".
Emergency spare wheel
411
X Remove vehicle tool kit tray :. X Turn stowage tray ; counter-clockwise
and remove it.
X Remove "Minispare" emergency spare
wheel =.
Removing the emergency spare wheel (Wagon)
monitor cannot function reliably. Only restart the tire pressure loss warning system/the tire pressure monitor when the damaged wheel has been replaced with a new wheel. Vehicles with tire pressure monitor: after mounting an emergency spare wheel, the system may still display the tire pressure of the removed wheel for a few minutes. The value displayed for the mounted emergency spare wheel is not the same as the current tire pressure of the emergency spare wheel.
"Minispare" emergency spare wheel/ collapsible spare wheel Opening the stowage well Sedan: the emergency spare wheel can be found in the stowage well under the trunk floor. X Lift the trunk floor upwards (Y page 312). Wagon: the emergency spare wheel is located in the stowage well under the cargo compartment floor. X Remove the seat cushions of the folding
bench seat (Y page 114).
X Lift the cargo compartment floor up.
Example: emergency spare wheel X Remove vehicle tool kit tray : by
recess ;.
X Remove "Minispare" emergency spare
wheel =.
Removing the emergency spare wheel (AMG vehicles)
Removing the emergency spare wheel (Sedan)
Example: Sedan
X Reach into cutout : in the tool holder and
lift it up.
X Remove collapsible spare wheel ;. Always observe the instructions and safety notes in the "Mounting a wheel" section (Y page 396).
412 Emergency spare wheel
Stowing a used collapsible spare wheel ! Only place the collapsible spare wheel in
the vehicle when it is dry. Otherwise, moisture may get into the vehicle.
Take the following steps to stow a used collapsible spare wheel. It will not otherwise install into the spare wheel well. Mercedes- Benz recommends that you have this work performed at a qualified specialist workshop, e.g. at an authorized Mercedes-Benz Center. X Unscrew the valve cap from the valve. X Use the back of the valve cap to unscrew the valve insert from the valve and release the air.
i Fully deflating the tires can take a few
minutes.
X Screw the valve insert back into the valve. X Screw the valve cap back on. X Remove the protective sheet from the
vehicle tool kit and pull it over the collapsible spare wheel.
X Stow the collapsible spare wheel in the emergency spare wheel well under the trunk.
Inflating the collapsible spare wheel ! Inflate the collapsible spare wheel using
the tire inflation compressor before lowering the vehicle. The wheel rim could otherwise be damaged.
! Do not operate the tire inflation
compressor for longer than eight minutes at a time without a break. It may otherwise overheat. The tire inflation compressor can be operated again once it has cooled down.
X Mount the collapsible spare wheel as
described (Y page 395). The collapsible spare wheel must be mounted before it is inflated.
X Pull connector ? and the air hose out of
the housing.
X Remove the cap from the valve on the
collapsible spare wheel.
X Screw union nut : on the air hose onto the
valve.
X Make sure on/off switch A of the tire
inflation compressor is set to 0.
X Insert connector ? into the cigarette
lighter socket or into a 12 V socket in your vehicle. Observe the notes on the cigarette lighter (Y page 319). Observe the notes on sockets (Y page 320).
X Turn the SmartKey to position 1 in the
ignition lock (Y page 159).
X Press on/off switch A on the tire inflation
compressor to I. The tire inflation compressor is switched on. The tire is inflated. The tire pressure is shown on pressure gauge =.
X Inflate the tire to the specified tire
pressure. The specified tire pressure is printed on the yellow label of the emergency spare wheel. X When the specified tire pressure has been
reached, press on/off switch A on the electric air pump to 0. The tire inflation compressor is switched off.
Emergency spare wheel
413
X Turn the SmartKey to position 0 in the
ignition lock.
X If the tire pressure is higher than the
specified pressure, press pressure release button ; until the correct tire pressure has been reached.
X Unscrew union nut : on the air hose from
the valve.
X Screw the valve cap onto the collapsible
spare wheel valve again.
X Stow plug ? and the air hose in the lower
section of the blower housing.
X Stow the tire inflation compressor in the
vehicle.
Alloy wheels
4.0 B x 17 H28
Wheel offset: 1.34 in (34 mm)
4.5 B x 18 H29
Wheel offset: 1.42 in (36 mm)
Alloy wheels
6.5 B x 19 H2
Wheel offset: 0.55 in (14 mm)
414 Emergency spare wheel
Technical data
All vehicles (except AMG vehicles)
"Minispare" emergency spare wheel
Tires
T 155/70 R17 110 M8
Tire pressure: 420 kPa (4.2 bar/61 psi)
T 155/60 R18 107 M9
Tire pressure: 420 kPa (4.2 bar/61 psi)
AMG vehicles Collapsible spare wheel Tires 175/50 – 19 97 P Tire pressure: 350 kPa (3.5 bar/51 psi)
8 Not for E 550 4MATIC. 9 Not for E 550 4MATIC.
Useful information ............................ 416
Information regarding technical
data .................................................... 416
Warranty ............................................ 416
Identification plates ......................... 416
Service products and filling capaci-
ties ..................................................... 418
Vehicle data ...................................... 426
415
416
Identification plates
Useful information
Warranty
i This Operator's Manual describes all models and all standard and optional equipment of your vehicle available at the time of publication of the Operator's Manual. Country-specific differences are possible. Please note that your vehicle may not be equipped with all features described. This also applies to safety- related systems and functions.
i Read the information on qualified specialist workshops: (Y page 26).
Information regarding technical data General information G WARNING HYBRID vehicles: It is imperative that you read the HYBRID Supplemental Operating Instructions included in your vehicle literature portfolio. You may otherwise not receive all necessary safety information and warning for the operation of your vehicle.
i The data stated here specifically refers to a vehicle with standard equipment. Consult an authorized Mercedes-Benz Center for the data for all vehicle variants and trim levels.
Information in the printed Operator's Manual In the printed Operator's Manual you can find information about: RVehicle data RTrunk lid/tailgate opening dimensions RTank capacity RCoolant (engine) REngine oil approval and capacity RDEF filling capacity RRefrigerant filling capacity and PAG oil RTowing a trailer
Your vehicle is covered under the terms of the warranties printed in the Service and Warranty Information booklet. Your authorized Mercedes-Benz Center will replace and repair all factory-installed parts in accordance with the following warranty terms and conditions: RNew Vehicle Limited Warranty REmission Systems Warranty REmission Performance Warranty RCalifornia, Connecticut, Maine,
Massachusetts, New York, Pennsylvania, Rhode Island and Vermont Emission Control System Warranty
RState warranty enforcement laws (Lemon
Laws)
Replacement parts and accessories are covered by the Mercedes-Benz Parts and Accessories warranties. These are available at any authorized Mercedes-Benz Center. i If you lose the Service and Warranty
Information booklet, contact an authorized Mercedes-Benz Center to arrange a replacement. It will be mailed to you.
Identification plates Vehicle identification plate with vehicle identification number (VIN)
X Open the front left-hand door.
You will see vehicle identification plate :.
Identification plates
417
VIN
Example: vehicle identification plate (USA only) ; VIN = Paint code
X Slide the right-hand front seat to its
rearmost position.
X Fold floor covering : upwards.
You will see VIN ;.
The VIN can also be found in the following locations: Ron the lower edge of the windshield
Ron the vehicle identification plate
(Y page 417)
(Y page 416)
Engine number
Example: vehicle identification plate (Canada only) ; VIN = Paint code i The data shown on the vehicle
identification plate is used only as an example. This data is different for every vehicle and can deviate from the data shown here. You can find the data applicable to your vehicle on the vehicle identification plate.
: Emission control information plate,
including the certification of both federal and Californian emissions standards
; Engine number (stamped into the
crankcase)
= VIN (on the lower edge of the windshield)
418 Service products and filling capacities
Service products and filling capacities Important safety notes G WARNING Service products may be poisonous and hazardous to health. There is a risk of injury. Comply with instructions on the use, storage and disposal of service products on the labels of the respective original containers. Always store service products sealed in their original containers. Always keep service products out of the reach of children. H Environmental note Dispose of service products in an environmentally responsible manner.
Service products include the following: RFuels (e.g. gasoline, diesel) RExhaust gas aftertreatment additives, e.g.
DEF
RLubricants (e.g. engine oil, transmission oil) RCoolant RBrake fluid RWindshield washer fluid RClimate control system refrigerant Comply with all valid regulations with respect to handling, storing, and disposing of service fluids. Components and service products must be matched. You should therefore only use products that have been tested and approved by Mercedes-Benz. Information on tested and approved products can be obtained at an authorized Mercedes- Benz Center or on the Internet at http://bevo.mercedes-benz.com. You can recognize service products approved by Mercedes-Benz by the following inscription on the containers: RMB-Freigabe (e.g. MB-Freigabe 229.51) RMB Approval (e.g. MB Approval 229.51)
Other designations or recommendations indicate a level of quality or a specification in accordance with an MB Sheet number (e.g. MB 229.5). They have not necessarily been approved by Mercedes-Benz.
Fuel Important safety notes G WARNING Fuel is highly flammable. If you handle fuel incorrectly, there is a risk of fire and explosion. You must avoid fire, open flames, creating sparks and smoking. Switch off the engine and, if applicable, the auxiliary heating before refueling. G WARNING Fuel is poisonous and hazardous to health. There is a risk of injury. You must make sure that fuel does not come into contact with your skin, eyes or clothing and that it is not swallowed. Do not inhale fuel vapors. Keep fuel away from children. If you or others come into contact with fuel, observe the following: RWash away fuel from skin immediately
using soap and water.
RIf fuel comes into contact with your eyes, immediately rinse them thoroughly with clean water. Seek medical assistance without delay.
RIf fuel is swallowed, seek medical
assistance without delay. Do not induce vomiting.
RImmediately change out of clothing which
has come into contact with fuel.
Service products and filling capacities
419
Tank capacity
Model
AMG vehicles
All other models
Model
AMG vehicles
All other models
Total
capacity 66.0 l
or
80.0 l
21.1 US gal
(80.0 l)
Of which reserve Approx. 3.7 US gal (14.0 l) Approx. 2.4 US gal
(9.0 l)
Gasoline Fuel grade ! Do not use diesel to refuel vehicles with a
gasoline engine. Do not switch on the ignition if you accidentally refuel with the wrong fuel. Otherwise, the fuel will enter the fuel system. Even small amounts of the wrong fuel could result in damage to the fuel system and the engine. Notify a qualified specialist workshop and have the fuel tank and fuel lines drained completely. ! Only refuel using unleaded gasoline with
a minimum octane rating of 91.
! Only use the fuel recommended.
Operating the vehicle with other fuels can lead to engine failure.
! Do not use the following:
RE85 (gasoline with 85% ethanol) RE100 (100% ethanol) RM15 (gasoline with 15% methanol) RM30 (gasoline with 30% methanol) RM85 (gasoline with 85% methanol)
RM100 (100% methanol) RGasoline with metalliferous additives RDiesel Do not mix such fuels with the fuel recommended for your vehicle. Do not use additives. This can otherwise lead to engine damage. This does not include cleaning additives for the removal and prevention of residue build-up. gasoline may only be mixed with cleaning additives recommended by Mercedes-Benz; see "Additives". You can obtain further information from any authorized Mercedes- Benz Center.
! To ensure the longevity and full
performance of the engine, only premium- grade unleaded gasoline must be used. If standard premium-grade unleaded gasoline is unavailable and unleaded gasoline of a lower grade is used for refueling, observe the following precautions: Ronly fill the fuel tank to half full with
regular unleaded gasoline and fill the rest with premium-grade unleaded gasoline as soon as possible.
Rdo not drive at the maximum speed. Ravoid sudden acceleration and engine
speeds above 3000 rpm.
Rnever refuel using fuel with an octane
number lower than 87. Otherwise, engine failure could occur.
Using mixtures of methanol and ethanol is not permitted. E10 fuel or E15 fuel (unleaded gasoline with 10% or 15% ethanol) can be used. You will usually find information about the fuel grade on the pump. If you cannot find the label on the pump, ask the staff for assistance. i For further information, consult a
qualified specialist workshop or on the Internet at http://www.mbusa.com (USA only).
420 Service products and filling capacities
Information on refueling (Y page 176). Additives ! Operating the engine with fuel additives added later can lead to engine failure. Do not mix fuel additives with fuel. This does not include additives for the removal and prevention of residue buildup. gasoline must only be mixed with additives recommended by Mercedes-Benz. Comply with the instructions for use on the product label. More information about recommended additives can be obtained from any authorized Mercedes-Benz Center.
Mercedes-Benz recommends that you use fuel brands that have the additives. The quality of the fuel available in some countries may not be sufficient. Residue could build up as a result. In such cases, and in consultation with an authorized Mercedes- Benz Center, the gasoline may be mixed with the cleaning additive recommended by Mercedes-Benz (part no. A000989254512). You must observe the notes and mixing ratios specified on the container.
Diesel Fuel grade G WARNING If you mix diesel fuel with gasoline, the flash point is lower than that of pure diesel fuel. When the engine is running, exhaust system components could overheat without being noticed. There is a risk of fire. Never refuel with gasoline. Never mix gasoline with diesel fuel.
! Only use commercially available vehicular ULTRA-LOW SULFUR DIESEL FUEL (ULSD, 15 ppm maximum sulfur content) that meets the ASTM D975 standard. If you do not refuel with ULSD, you may damage the BlueTEC exhaust gas aftertreatment system of the vehicle.
! Do not use gasoline to refuel vehicles with a diesel engine. Do not mix diesel fuel with gasoline, kerosene or paraffin. This may otherwise result in damage to the fuel system and engine.
You will usually find information about the fuel grade on the pump. If you cannot find the label on the pump, ask the staff for assistance. i For further information, consult a
qualified specialist workshop or on the Internet at http://www.mbusa.com (USA only).
Information on refueling (Y page 176). Low outside temperatures i Diesel fuel with improved cold flow
properties is available during the winter months. Further information about fuel properties can be obtained from oil companies, e.g. at gas stations.
Flexible Fuel vehicles Important safety notes G WARNING Fuel is highly flammable. If you handle fuel incorrectly, there is a risk of fire and explosion. You must avoid fire, open flames, creating sparks and smoking. Switch off the engine and, if applicable, the auxiliary heating before refueling. G WARNING Fuel is poisonous and hazardous to health. There is a risk of injury. You must make sure that fuel does not come into contact with your skin, eyes or clothing and that it is not swallowed. Do not inhale fuel vapors. Keep fuel away from children.
Service products and filling capacities
421
If you or others come into contact with fuel, observe the following: RWash away fuel from skin immediately
using soap and water.
RIf fuel comes into contact with your eyes, immediately rinse them thoroughly with clean water. Seek medical assistance without delay.
RIf fuel is swallowed, seek medical
assistance without delay. Do not induce vomiting.
RImmediately change out of clothing which
has come into contact with fuel.
Flexible Fuel vehicles can be refueled with the following fuel types: Rpremium-grade unleaded gasoline RE85 fuel Ra mixture of E85 fuel and premium-grade
unleaded gasoline
i Flexible Fuel vehicles can be recognized by the Ethanol up to E85 sticker on the inside of the fuel filler flap.
Fuel consumption
The energy content of E85 fuel is less than
that of the same amount of premium-grade
gasoline. The amount of fuel consumed when
operating the vehicle with E85 fuel is
therefore higher than with premium-grade
gasoline.
Maintenance
Inform your authorized Mercedes-Benz
Center that you are operating or have
operated the vehicle with E85 fuel.
Low outside temperatures
If the outside temperature is below 32 ‡
(0 †), the starting procedure can take
noticeably longer when operating with E85
fuel.
E85 fuel is not suitable for use at outside
temperatures under -4 ‡ (-20 †).
DEF Important safety notes Comply with the important safety notes for service products when handling DEF (Y page 418). DEF is a water-soluble fluid for the exhaust gas aftertreatment of diesel engines. It is: Rnot poisonous Rcolorless and odorless Rnot flammable When you open the DEF container, small amounts of ammonia vapor may be released. Ammonia vapors have a pungent odor and are particularly irritating to the skin, to mucous membranes and to the eyes. You may experience a burning sensation in your eyes, nose and throat. Coughing and watering of the eyes are possible. Do not inhale ammonia vapors. Fill the DEF tank only in well-ventilated areas.
Low outside temperatures DEF freezes at a temperature of approximately 12 ‡ (-11 †). The vehicle is delivered from the factory equipped with a DEF preheating system. Winter operation can thus be guaranteed even at temperatures below 12 ‡ (-11 †).
Additives ! Only use DEF in accordance with ISO
22241. Do not use additives with DEF and do not dilute DEF with water. This may destroy the BlueTEC exhaust gas aftertreatment system.
Purity ! Impurities in DEF (e.g. due to other
service products, cleaning agents or dust) lead to: Rincreased emission values Rdamage to the catalytic converter
422 Service products and filling capacities
Center. Or visit the website http://bevo.mercedes-benz.com. The table shows which engine oils have been approved for your vehicle. Model
MB
Engine
model
276
278
157
651
Approval
229.5
229.5
229.5
228.51,
229.31,
229.51
E 300 4MATIC (Canada only) E 350 (USA only) E 350 4MATIC E 550 4MATIC AMG vehicles E 250 BlueTEC E 250 BlueTEC 4MATIC
Use only SAE 0W-40 or SAE 5W-40 engine oils for AMG vehicles. i MB approval is indicated on the oil
containers.
Filling capacities The following values refer to an oil change including the oil filter. Model E 550 4MATIC AMG vehicles All other models
8.5 US qt (8.0 l) 9.0 US qt (8.5 l) 6.9 US qt (6.5 l)
Capacity
Additives ! Do not use any additives in the engine oil.
This could damage the engine.
Rengine damage Rmalfunctions in the BlueTEC exhaust gas
aftertreatment system
Assuring the purity of DEF is particularly important with respect to avoiding malfunctions in the BlueTEC exhaust gas aftertreatment system. If DEF is pumped out of the DEF tank, e.g. during repair work, it must not be returned to the tank. The purity of the fluid can no longer be guaranteed.
Filling capacities
Model E 250 BlueTEC E 250 BlueTEC 4MATIC
Total capacity
6.5 US gal (24.5 l)
Engine oil General notes ! Never use engine oil or an oil filter of a specification other than is necessary to fulfill the prescribed service intervals. Do not change the engine oil or oil filter in order to achieve longer replacement intervals than those prescribed. You could otherwise cause engine damage or damage to the exhaust gas aftertreatment. Follow the instructions in the service interval display regarding the oil change. Otherwise, you may damage the engine and the exhaust gas aftertreatment.
Comply with the important safety notes for service products when handling engine oil (Y page 418). The engine oils are matched to the performance of Mercedes-Benz engines and service intervals. You should therefore only use engine oils and oil filters that are approved for vehicles with maintenance systems. For a list of approved engine oils and oil filters, consult an authorized Mercedes-Benz
Service products and filling capacities
423
Engine oil viscosity
Viscosity describes the flow characteristics of a fluid. If an engine oil has a high viscosity, this means that it is thick; a low viscosity means that it is thin. Select an engine oil with an SAE classification (viscosity) suitable for the prevailing outside temperatures. The table shows you which SAE classifications are to be used. The low- temperature characteristics of engine oils can deteriorate significantly, e.g. as a result of aging, soot and fuel deposits. It is therefore strongly recommended that you carry out regular oil changes using an approved engine oil with the appropriate SAE classification.
Brake fluid G WARNING The brake fluid constantly absorbs moisture from the air. This lowers the boiling point of the brake fluid. If the boiling point of the brake fluid is too low, vapor pockets may form in the brake system when the brakes are applied hard. This would impair braking efficiency. There is a risk of an accident. You should have the brake fluid renewed at the specified intervals.
Comply with the important safety notes for service products when handling brake fluid (Y page 418). The brake fluid change intervals can be found in the Maintenance Booklet.
Only use brake fluid approved by Mercedes- Benz according to MB Approval 331.0. Information about approved brake fluid can be obtained at any qualified specialist workshop or on the Internet at http://bevo.mercedes-benz.com. i Have the brake fluid regularly replaced at
a qualified specialist workshop and the replacement confirmed in the Maintenance Booklet.
Coolant Important safety notes G WARNING If antifreeze comes into contact with hot components in the engine compartment, it may ignite. There is a risk of fire and injury. Let the engine cool down before you add antifreeze. Make sure that antifreeze is not spilled next to the filler neck. Thoroughly clean the antifreeze from components before starting the engine.
! Only add coolant that has been premixed with the desired antifreeze protection. You could otherwise damage the engine. Further information on coolants can be found in the Mercedes-Benz Specifications for Service Products, MB Specifications for Service Products 310.1, e.g. on the Internet at http://bevo.mercedes-benz.com. Or contact a qualified specialist workshop. ! Always use a suitable coolant mixture,
even in countries where high temperatures prevail. Otherwise, the engine cooling system is not sufficiently protected from corrosion and overheating.
i Have the coolant regularly replaced at a
qualified specialist workshop and the replacement confirmed in the Maintenance Booklet.
424 Service products and filling capacities
Comply with the important safety precautions for service products when handling coolant (Y page 418). The coolant is a mixture of water and antifreeze/corrosion inhibitor. It performs the following tasks: Rcorrosion protection Rantifreeze protection Rraising the boiling point If the coolant has antifreeze protection down to -35 ‡ (-37 †), the boiling point of the coolant during operation is approximately 266 ‡ (130 †). The antifreeze/corrosion inhibitor concentration in the engine cooling system should: Rbe at least 50%. This will protect the engine
cooling system against freezing down to approximately -35 ‡ (-37 †).
Rnot exceed 55% (antifreeze protection
down to -49 ‡ [-45 †]). Otherwise, heat will not be dissipated as effectively.
If the vehicle has lost coolant, add equal amounts of water and antifreeze/corrosion inhibitor. Mercedes-Benz recommends an antifreeze/ corrosion inhibitor concentrate in accordance with MB Specifications for Service Products 310.1. i When the vehicle is first delivered, it is filled with a coolant mixture that ensures adequate antifreeze and corrosion protection.
i The coolant is checked with every maintenance interval at a qualified specialist workshop.
Filling capacities Missing values were not available at time of going to print. Model E 300 4MATIC (Canada only) E 350 (USA only) E 350 4MATIC E 550 4MATIC
Approx. 10.1 US gal
Approx. 13.0 US qt
Capacity
(9.6 l)
(12.3 l)
E 63 AMG 4MATIC
E 63 AMG S- MODEL 4MATIC E 250 BlueTEC E 250 BlueTEC 4MATIC
Approx. 11.4 US qt
(10.8 l)
Approx. 11.5 US qt
(10.9 l)
Approx. 11.0 US qt
(10.4 l)
i Use MB 325.0 or MB 326.0 corrosion
inhibitor/antifreeze.
Windshield washer system Important safety notes G WARNING Windshield washer concentrate is highly flammable. If it comes into contact with hot engine components or the exhaust system it could ignite. There is a risk of fire and injury. Make sure that no windshield washer concentrate is spilled next to the filler neck.
! Do not add distilled or de-ionized water to the washer fluid container. Otherwise, the level sensor may be damaged.
! Only MB SummerFit and MB WinterFit
washer fluid should be mixed together. The spray nozzles may otherwise become blocked.
Service products and filling capacities
425
Comply with the important safety notes for service products when handling washer fluid (Y page 418). At temperatures above freezing: X Fill the washer fluid reservoir with a mixture of water and windshield washer fluid, e.g. MB SummerFit.
Add 1 part MB SummerFit to 100 parts water. At temperatures below freezing: X Fill the washer fluid reservoir with a mixture
of water and washer fluid, e.g. MB WinterFit.
Adapt the mixing ratio to the outside temperature. RDown to 14 ‡ (Ò10 †): mix 1 part MB
WinterFit to 2 parts water.
RDown to Ò4 ‡ (Ò20 †): mix 1 part MB
WinterFit to 1 part water.
RDown to Ò20.2 ‡ (Ò29 †): mix 2 parts MB
WinterFit to 1 part water.
i Add windshield washer fluid, e.g. MB
SummerFit or MB WinterFit, to the washer fluid all year round.
Climate control system refrigerant Important safety notes The climate control system of your vehicle is filled with refrigerant R-134a. The instruction label regarding the refrigerant type used can be found on the radiator cross member. ! Only the refrigerant R-134a and the PAG
oil approved by Mercedes-Benz may be used. The approved PAG oil may not be mixed with any other PAG oil that is not approved for R-134a refrigerant. Otherwise, the climate control system may be damaged.
Service work, such as topping-up refrigerant or replacing components, may only be carried out by a qualified specialist workshop. All
applicable regulations must be adhered to, SAE standard J639 included. Always have work on the climate control system carried out at a qualified specialist workshop.
Refrigerant instruction label
Example: refrigerant instruction label : Warning symbol ; Refrigerant filling capacity = Applicable SAE standards ? PAG oil part number A Type of refrigerant Warning symbols : indicate: Rpossible dangers Rhaving service work carried out at a
qualified specialist workshop
Filling capacities
AMG vehicles Refrigerant
PAG oil
All other models Refrigerant
PAG oil
Capacity
22.6 ± 0.4 oz (640 ± 10 g)
—
Capacity
20.8 ± 0.4 oz (590 ± 10 g)
4.2 oz (120 g)
426 Vehicle data
Vehicle data General notes Please note that for the specified vehicle data: Rthe heights specified may vary as a result
of:
tires load
- condition of the suspension - optional equipment
Roptional equipment reduces the maximum
payload.
Dimensions and weights
Missing values were not available at time of going to print. Model
Opening height
Max.
headroom
Sedan (except E 550 4MATIC) E 550 4MATIC Wagon
AMG vehicles (Sedan)
AMG vehicles (Wagon)
69.4 in
(1763 mm)
—
—
80.6 in
(2048 mm) 68.7 in - 69.5 in
75.8 in
(1925 mm)
—
(1744 mm)
(1764 mm) 82.1 in - 82.9 in
(2086 mm)
(2106 mm)
192.1 in (4879 mm)
Missing values were not available at time of going to print. All models (except for AMG vehicles) Vehicle length, Sedan Vehicle length, Wagon Vehicle width including exterior mirrors Wheelbase Turning radius Maximum roof load
113.2 in (2874 mm) 37.0 ft (11.28 m) 220 lbs (100 kg)
193.1 in (4905 mm)
81.5 in (2071 mm)
All models (except for AMG vehicles) Maximum trunk load, Sedan Maximum trunk load, Wagon
E 300 4MATIC (Canada only) Vehicle height
E 350
Vehicle height
E 350 4MATIC Vehicle height, Sedan Vehicle height, Wagon
E 550 4MATIC Vehicle height
E 250 BlueTEC E 250 BlueTEC 4MATIC Vehicle height
All models (only AMG vehicles) Vehicle length, Sedan Vehicle length, Wagon
Vehicle data 427
All models (only AMG vehicles) Vehicle width including exterior mirrors Wheelbase Maximum roof load
81.5 in (2071 mm)
113.2 in (2874 mm) 220 lbs (100 kg)
58.2 in (1477 mm)
58.2 in (1477 mm)
E 63 AMG Vehicle length, Sedan
Vehicle length, Wagon
Vehicle height, Sedan
58.2 in (1477 mm)
Vehicle height, Wagon
59.4 in (1509 mm)
58.2 in (1477 mm)
192.9 in (4900 mm)
193.4 in (4912 mm)
E 63 AMG 4MATIC Vehicle length, Sedan
Vehicle length, Wagon
Vehicle height, Sedan
Vehicle height, Wagon
E 63 AMG S-MODEL Vehicle length, Sedan
Vehicle length, Wagon
192.6 in (4892 mm) 193.0 in (4904 mm)
57.1 in
(1450 mm)
59.1 in
(1502 mm)
192.6 in (4892 mm) 193.0 in (4904 mm)
57.7 in
(1466 mm)
59.9 in
(1522 mm)
192.9 in (4900 mm) 193.4 in (4912 mm)
428 Vehicle data
E 63 AMG S-MODEL Vehicle height, Sedan
Vehicle height, Wagon
E 63 AMG 4MATIC S- MODEL Vehicle length, Sedan
Vehicle length, Wagon
Vehicle height, Sedan
Vehicle height, Wagon
57.1 in
(1450 mm)
59.1 in
(1502 mm)
192.9 in (4900 mm) 193.4 in (4912 mm)
57.7 in
(1466 mm)
59.9 in
(1522 mm)
Publication details Internet
Further information about Mercedes-Benz vehicles and about Daimler AG can be found on the following websites: http://www.mbusa.com (USA only) http://www.mercedes-benz.ca (Canada only)
Editorial office
©Daimler AG: Not to be reprinted, translated or otherwise reproduced, in whole or in part, without written permission from Daimler AG.
As at 22.11.2012
É2125845100{ËÍ
2125845100
Order no. 6515 3564 13 Part no. 212 584 51 00 Edition B 2014
Nur für internen Gebrauch / For internal use only