2010 Hyundai Santa FE Owners Manual

Download PDF Manual
CLUSTER BCM 1 RR A/CON TPMS BCM 2 AUDIO 2 BLOWER STOP LP PDM 1 BCM 3 CLOCK AUDIO 1 ATM PDM 2 POWER CONNECTOR 10A 15A 15A 15A 15A 10A 10A 10A 15A 10A 10A 10A 30A 15A 20A 10A 15A 15A 10A 15A Hazard Switch Driver/Passenger Seat Warmer Control Module ICM Relay Box (DRL Relay) Hazard Relay, Hazard Switch, BCM, Instrument Cluster (IND.), Multifunction Switch (Light), Rear Combination Lamp (OUT) LH/RH, Head Lamp LH/RH Rear Wiper Relay, Rear Wiper Motor, Multifunction Switch (Wiper) A/C Control Module Alternator, Instrument Cluster (IND.), BCM, A/V & Navigation Head Unit, Tire Pressure Monitoring Module, DVD Module BCM Not Used Tire Pressure Monitoring Module Rheostat, BCM, Instrument Cluster (MICOM), AC Inverter Switch, AC Inverter Module Audio, A/V & Navigation Head Unit, BCM, DVD Module, Digital Clock & Telltale, Power Outside Mirror Switch Blower Relay, Blower Motor, A/CON SW 10A Stop Lamp Switch Not Used BCM, Ignition Key ILL. & Door Warning Switch, Security Indicator A/C Control Module, Data Link Connector, Digital Clock & Telltail Audio, A/V & Navigation Head Unit, DVD Module Sport Mode Switch, Key Solenoid Not Used FUSE - ROOM LP 15A, CLOCK 15A, AUDIO 1 15A, BCM 3 10A 7 51 Maintenance Engine compartment Description Fuse rating Protected component 175A 30A 40A 40A 50A 20A 40A 40A 50A 40A 50A 40A 40A 15A 30A 15A 15A FUSIBLE LINK - BLR, B+ 2, P/WDW, ESC 1, ESC 2 FUSE - DEICER, RR HTD, A/CON, FR FOG, H/LP LO LH, H/LP LO RH Trailer Power Outlet Ignition Switch (ACC, IG 1) Multipurpose Check Connector, ESC Control Module Condenser Fan Relay (High) ESC Control Module FUSE - BLOWER Power Window Relay, FUSE - SAFETY PWR FUSE - P/SEAT, TPMS, RR A/CON, S/WARMER, S/ROOF, PDM 2, P/AMP, AC INVERTER, DRL Ignition Switch (START, IG 2), Start Relay FUSE - DR LOCK, HAZARD, ATM, PDM 1, STOP LP, POWER CONNECTOR (BCM 3, CLOCK ROOM LP, AUDIO 1) Condenser Fan Relay (Low) Engine Control Relay Front Wiper Deicer Relay Rear Defogger Relay Head Lamp Low Relay (RH) Horn Relay ALT BATT IGN 1 ESC 1 CON FAN 2 ESC 2 BLR P/WDW B+ 2 IGN 2 B+ 1 CON FAN 1 ECU MAIN DEICER RR HTD H/LP LO RH HORN 52 Maintenance Description Fuse rating Protected component 10 11 12 13 H/LP LO LH H/LP HI IND A/CON ATM TAIL LP RH FR FOG 15A 10A 10A 15A 10A 10A Head Lamp Low Relay (LH) Instrument Cluster (High Beam IND.) A/CON Relay AWD ECM, PCM (G4KE), Back-Up Lamp Relay Rear Combination Lamp (In)/(Out) RH, Head Lamp RH, Glove Box Lamp, Illuminations Front Fog Lamp Relay 14 SENSOR 3 15A G4KE - Injector #1~#4, Canister Close Valve Canister Purge Control Solenoid Valve G6DC - PCM, Oil Control Valve #1/2 (Exhaust/Intake) Canister Purge Control Solenoid Valve Canister Close Valve, Variable Intake Manifold Valve #1/2 15 16 17 18 19 20 21 22 23 24 TAIL LP LH FUEL PUMP FR WIPER TCU ESC COOLING B/UP LP H/LP ECU H/LP HI 10A 15A 25A 15A 10A 10A 10A 10A 10A 20A License Lamp, Rear Combination Lamp (In) LH, Rear Combination Lamp (Out) LH, Head Lamp LH Fuel Pump Relay Front Wiper Relay, Front Wiper Motor, Multifunction Switch (Wiper) PCM, Battery Sensor Multipurpose Check Connector (G6DC), AWD ECM, ESC Control Module, Yaw Rate Sensor, Stop Lamp Switch (G6DC) Condenser Fan Relay (G6DC) Back-Up Lamp Relay, Back-Up Lamp Switch (G4KE) Head Lamp Low Relay (LH/RH), Front Fog Lamp Relay, Head Lamp High Relay PCM, Alternator (G6DC), Transaxle Range Switch Head Lamp High Relay 7 53 Maintenance Description Fuse rating Protected component 25 SENSOR 1 10A G4KE - Stop Lamp Switch, Immobilizer Module, A/CON Relay, Fuel Pump Relay, Condenser Fan Relay (Low/High), Crankshaft Position Sensor, Oil Control Valve #1/2, Camshaft Position Sensor #1/2, Oxygen Sensor (Up), Variable Intake Manifold Valve G6DC - PCM, A/CON Relay, Fuel Pump Relay, Injector #1~#6, Immobilizer Module 26 27 28 29 30 31 32 SENSOR 2 IGN COIL SPARE SPARE SPARE SPARE SPARE 15A 20A 10A 15A 20A 25A 30A G4KE - PCM, Oxygen Sensor (Down) G6DC - PCM, Oxygen Sensor #1~#4, Variable Charge Motion Actuator G4KE - Condenser, Ignition Coil #1~#4 G6DC - Condenser #1/2, Ignition Coil #1~#6 54 Maintenance ✽✽ NOTICE After heavy, driving rain or washing, headlight and taillight lenses could appear frosty. This condition is caused by the temperature difference between the lamp inside and outside. This is similar to the condensation on your windows inside your vehicle during the rain and doesn’t indicate a problem with your vehicle. If the water leaks into the lamp bulb circuitry, have the vehicle checked by an authorized HYUNDAI dealer. CAUTION If you don’t have necessary tools, the correct bulbs and the expertise, consult an authorized HYUNDAI dealer.In many cases,it is difficult to replace vehicle light bulbs because other parts of the vehicle must be removed before you can get to the bulb. This is especially true if you have to remove the head- light assembly to get to the bulb(s). Removing/installing the headlight assembly can result in damage to the vehicle. LIGHT BULBS G220000AFD WARNING - Working on the lights Prior to working on the light, firmly apply the parking brake, ensure that the ignition switch is turned to the “LOCK” position and turn off the lights to avoid sudden move- ment of the vehicle and burning your fingers or receiving an electric shock. Use only the bulbs of the specified wattage. CAUTION Be sure to replace the burned-out bulb with one of the same wattage rating. Otherwise, it may cause damage to the fuse or electric wiring system. 7 55 Maintenance (Continued) (cid:129) If a bulb becomes damaged or cracked, replace it immediately and carefully dispose of it. (cid:129) Wear eye protection when chang- ing a bulb. Allow the bulb to cool down before handling it. OCM070029 OHD076046 G220100AUN Headlight, position light, turn sig- nal light, front fog light bulb replacement (1) Headlight (High) (2) Headlight (Low) (3) Position light / Front turn signal light (Front side marker) (4) Front fog light (if equipped) G220101ACM Headlight bulb WARNING - Halogen bulbs (cid:129) Halogen bulbs contain pressur- ized gas that will produce flying pieces of glass if broken. (cid:129) Always handle them carefully, and avoid scratches and abra- sions. If the bulbs are lit, avoid contact with liquids. Never touch the glass with bare hands. Residual oil may cause the bulb to overheat and burst when lit. A bulb should be operated only when installed in a headlight. (Continued) 56 OCM070050L 1. Open the hood. 2. Loosen the retaining bolts and remove the headlight assembly from the body of the vehicle. 3. Disconnect the power connector from the back of the headlight assembly. OCM070051L 4. Remove the headlight bulb cover by turning it counterclockwise. 5. Disconnect the headlight bulb socket- connector. 6. Unsnap the headlight bulb retaining wire by depressing the end and push- ing it upward (High beam). 7. Remove the bulb from the headlight assembly. Maintenance 8. Install a new headlight bulb and snap the headlight bulb retaining wire into position by aligning the wire with the groove on the bulb (High beam). 9. Connect the headlight bulb socket connector. 10. Install the headlight bulb cover by turning it clockwise. 11. Connect the power connector to the back of the headlight assembly. 12. Reinstall the headlight assembly to the body of the vehicle. ✽✽ NOTICE If the headlight aiming adjustment is necessary after the headlight assembly is reinstalled, consult an authorized HYUNDAI dealer. 7 57 Maintenance 3. Insert a new bulb by inserting it into the socket and rotating it until it locks into place. 4. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise. OCM055014L/H Turn signal light/Position light 1. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 2. Remove the bulb from the socket by pressing it in and rotating it counter- clockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket 58 OXM079053L Front fog light bulbs (if equipped) 1. Remove the front bumper under cover. 2. Reach your hand into the back of the front bumper. 3. Disconnect the power connector from the socket. 4. Remove the bulb-socket from the housing by turning the socket counter clockwise until the tabs on the socket align with the slots on the housing. 5. Install the new bulb-socket into the housing by aligning the tabs on the socket with the slots in the housing. Push the socket into the housing and turn the socket clockwise. 6. Connect the power connector to the socket. 7. Reinstall the front bumper under cover. OCM070033 Rear combination light bulb replacement (1) Rear turn signal light (2) Stop and tail light (3) Tail light (4) Back-up light (5) Rear side marker Maintenance OCM070052N OCM055026 Outside light 1. Open the tailgate. 2. Remove the service cover using a flat- blade screwdriver. 3. Loosen the light assembly retaining nuts with a wrench. 4. Remove the rear combination light assembly from the body of the vehicle. 7 59 Maintenance 5. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. 6. Remove the bulb from the socket by pressing it in and rotating it counter- clockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket. (Side marker : Remove the bulb from the socket by pulling it out) 7. Insert a new bulb by inserting it into the socket and rotating it until it locks into place. 8. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise. 9. Reinstall the light assembly to the body of the vehicle. 60 4. Remove the bulb from the socket by pressing it in and rotating it counter- clockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket. (Back-up light : Remove the bulb from the cock- et by pulling it out) 5. Insert a new bulb by inserting it into the socket and rotating it until it locks into place. 6. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise. 7. Install the service cover by putting it into the service hole. OCM070037 OCM070038 Inside light 1. Open the tailgate. 2. Remove the service cover using a flat- blade screwdriver. 3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly. Maintenance OCM070046 OCM055036 High mounted stop light replacement If the light does not operate, have the vehicle checked by an authorized HYUNDAI dealer. License plate light bulb replace- ment 1. Loosen the lens retaining screws with a philips head screwdriver. 2. Remove the lens. 3. Remove the bulb. 4. Install a new bulb. 5. Reinstall the lens securely with the lens retaining screws. OCM040134 Door courtesy lamp bulb replace- ment (if equipped) If the light does not operate, have the vehicle checked by an authorized HYUNDAI dealer. 7 61 Maintenance Map lamp Luggage room lamp Room lamp Vanity mirror lamp Glove box lamp OXM079044/OXM079041 OCM070049L/OCM055033/OCM070045 62 G220600AUN Interior light bulb replacement 1. Using a flat-blade screwdriver, gently pry the lens from the interior light housing. 2. Remove the bulb by pulling it straight out. WARNING Prior to working on the Interior Lights, ensure that the “OFF” but- ton is depressed to avoid burning your fingers or receiving an electric shock. 3. Install a new bulb in the socket. 4. Align the lens tabs with the interior light housing notches and snap the lens into place. CAUTION Use care not to dirty or damage lens,lens tab,and plastic housings. APPEARANCE CARE Exterior care G230101AUN Exterior general caution It is very important to follow the label directions when using any chemical cleaner or polish. Read all warning and caution statements that appear on the label. G230102CUN Finish maintenance Washing To help protect your vehicle’s finish from rust and deterioration, wash it thoroughly and frequently at least once a month with lukewarm or cold water. If you use your vehicle for off-road driv- ing, you should wash it after each off- road trip. Pay special attention to the removal of any accumulation of salt, dirt, mud, and other foreign materials. Make sure the drain holes in the lower edges of the doors and rocker panels are kept clear and clean. Insects, tar, tree sap, bird droppings, industrial pollution and similar deposits can damage your vehicle’s finish if not removed immediately. Even prompt washing with plain water may not completely remove all these deposits. A mild soap, safe for use on painted sur- faces, may be used. After washing, rinse the vehicle thor- oughly with lukewarm or cold water. Do not allow soap to dry on the finish. Maintenance CAUTION (cid:129) Do not use strong soap,chemical detergents or hot water, and do not wash the vehicle in direct sunlight or when the body of the vehicle is warm. (cid:129) Be careful when washing the side windows of your vehicle. Especially, with high-pressure water.Water may leak through the windows and wet the interior. (cid:129) To prevent damage to the plastic parts,do not clean with chemical solvents or strong detergents. WARNING - Wet brakes After washing the vehicle, test the brakes while driving slowly to see if they have been affected by water. If braking performance is impaired, dry the brakes by applying them lightly while maintaining a slow for- ward speed. 7 63 Maintenance OJB037800 CAUTION (cid:129) Water washing in the engine com- partment including high pressure water washing may cause the fail- ure of electrical circuits located in the engine compartment. (cid:129) Never allow water or other liquids to come in contact with electri- cal/electronic components inside the vehicle as this may damage them. 64 G230103AUN Finish damage repair Deep scratches or stone chips in the painted surface must be repaired promptly. Exposed metal will quickly rust and may develop into a major repair expense. ✽✽ NOTICE If your vehicle is damaged and requires any metal repair or replacement, be sure the body shop applies anti-corrosion materials to the parts repaired or replaced. Waxing Wax the vehicle when water will no longer bead on the paint. Always wash and dry the vehicle before waxing. Use a good quality liquid or paste wax, and follow the manufacturer’s instructions. Wax all metal trim to protect it and to maintain its luster. Removing oil, tar, and similar materials with a spot remover will usually strip the wax from the finish. Be sure to re-wax these areas even if the rest of the vehicle does not yet need waxing. CAUTION (cid:129) Wiping dust or dirt off the body with a dry cloth will scratch the finish. (cid:129) Do not use steel wool, abrasive cleaners, or strong detergents containing highly alkaline or caustic agents on chrome-plated or anodized aluminum parts.This may result in damage to the pro- tective coating and cause discol- oration or paint deterioration. Maintenance WARNING After washing the vehicle, test the brakes while driving slowly to see if they have been affected by water. If braking performance is impaired, dry the brakes by applying them lightly while maintaining a slow for- ward speed. B230104AUN Bright-metal maintenance (cid:129) To remove road tar and insects, use a tar remover, not a scraper or other sharp object. (cid:129) To protect the surfaces of bright-metal parts from corrosion, apply a coating of wax or chrome preservative and rub to a high luster. (cid:129) During winter weather or in coastal areas, cover the bright metal parts with a heavier coating of wax or preserva- tive. If necessary, coat the parts with non-corrosive petroleum jelly or other protective compound. G230105AUN Underbody maintenance Corrosive materials used for ice and snow removal and dust control may col- lect on the underbody. If these materials are not removed, accelerated rusting can occur on underbody parts such as the fuel lines, frame, floor pan and exhaust system, even though they have been treated with rust protection. Thoroughly flush the vehicle underbody and wheel openings with lukewarm or cold water once a month, after off-road driving and at the end of each winter. Pay special attention to these areas because it is difficult to see all the mud and dirt. It will do more harm than good to wet down the road grime without removing it. The lower edges of doors, rocker panels, and frame members have drain holes that should not be allowed to clog with dirt; trapped water in these areas can cause rusting. 7 65 Maintenance G230106AUN Aluminum wheel maintenance The aluminum wheels are coated with a clear protective finish. (cid:129) Do not use any abrasive cleaner, pol- ishing compound, solvent, or wire brushes on aluminum wheels. They may scratch or damage the finish. (cid:129) Use only a mild soap or neutral deter- gent, and rinse thoroughly with water. Also, be sure to clean the wheels after driving on salted roads. This helps pre- vent corrosion. (cid:129) Avoid washing the wheels with high- speed car wash brushes. (cid:129) Do not use any acid detergent. It may damage and corrode the aluminum wheels coated with a clear protective finish. 66 G230107AUN Corrosion protection Protecting your vehicle from corrosion By using the most advanced design and construction practices to combat corro- sion, we produces cars of the highest quality. However, this is only part of the job. To achieve the long-term corrosion resistance your vehicle can deliver, the owner's cooperation and assistance is also required. Common causes of corrosion The most common causes of corrosion on your car are: (cid:129) Road salt, dirt and moisture that is allowed to accumulate underneath the car. (cid:129) Removal of paint or protective coatings by stones, gravel, abrasion or minor scrapes and dents which leave unpro- tected metal exposed to corrosion. High-corrosion areas If you live in an area where your car is regularly exposed to corrosive materials, corrosion protection is particularly impor- tant. Some of the common causes of accelerated corrosion are road salts, dust control chemicals, ocean air and industrial pollution. Moisture breeds corrosion Moisture creates the conditions in which corrosion is most likely to occur. For example, corrosion is accelerated by high humidity, particularly when tempera- tures are just above freezing. In such conditions, the corrosive material is kept in contact with the car surfaces by mois- ture that is slow to evaporate. Mud is particularly corrosive because it is slow to dry and holds moisture in contact with the vehicle. Although the mud appears to be dry, it can still retain the moisture and promote corrosion. High temperatures can also accelerate corrosion of parts that are not properly ventilated so the moisture can be dis- persed. For all these reasons, it is par- ticularly important to keep your car clean and free of mud or accumulations of other materials. This applies not only to the visible surfaces but particularly to the underside of the car. To help prevent corrosion You can help prevent corrosion from get- ting started by observing the following: Keep your garage dry Don't park your car in a damp, poorly ventilated garage. This creates a favor- able environment for corrosion. This is particularly true if you wash your car in the garage or drive it into the garage when it is still wet or covered with snow, ice or mud. Even a heated garage can contribute to corrosion unless it is well ventilated so moisture is dispersed. Keep paint and trim in good condition Scratches or chips in the finish should be covered with "touch-up" paint as soon as possible to reduce the possibility of cor- rosion. If bare metal is showing through, the attention of a qualified body and paint shop is recommended. Bird droppings : Bird droppings are high- ly corrosive and may damage painted surfaces in just a few hours. Always remove bird droppings as soon as possi- ble. Keep your car clean The best way to prevent corrosion is to keep your car clean and free of corrosive materials. Attention to the underside of the car is particularly important. (cid:129) If you live in a high-corrosion area — where road salts are used, near the ocean, areas with industrial pollution, acid rain, etc.—, you should take extra care to prevent corrosion. In winter, hose off the underside of your car at least once a month and be sure to clean the underside thoroughly when winter is over. (cid:129) When cleaning underneath the car, give particular attention to the compo- nents under the fenders and other areas that are hidden from view. Do a thorough job; just dampening the accu- mulated mud rather than washing it away will accelerate corrosion rather than prevent it. Water under high pres- sure and steam are particularly effec- tive in removing accumulated mud and corrosive materials. (cid:129) When cleaning lower door panels, rocker panels and frame members, be sure that drain holes are kept open so that moisture can escape and not be trapped inside to accelerate corrosion. Maintenance Don't neglect the interior Moisture can collect under the floor mats and carpeting to cause corrosion. Check under the mats periodically to be sure the carpeting is dry. Use particular care if you carry fertilizers, cleaning materials or chemicals in the car. These should be carried only in proper containers and any spills or leaks should be cleaned up, flushed with clean water and thoroughly dried. 7 67 Maintenance Interior care G230201BUN Interior general precautions Prevent caustic solutions such as per- fume and cosmetic oil from contacting the dashboard because they may cause damage or discoloration. If they do con- tact the dashboard, wipe them off imme- diately. See the instructions that follow for the proper way to clean vinyl. CAUTION Never allow water or other liquids to come in contact with electrical/electronic components inside the vehicle as this may dam- age them. CAUTION When cleaning leather products (steering wheel, seats etc.), use neutral detergents or low alcohol content solutions. If you use high alcohol content solutions or acid/alkaline detergents, the color of the leather may fade or the sur- face may get stripped off. 68 G230202AUN Cleaning the upholstery and interior trim Vinyl Remove dust and loose dirt from vinyl with a whisk broom or vacuum cleaner. Clean vinyl surfaces with a vinyl cleaner. Fabric Remove dust and loose dirt from fabric with a whisk broom or vacuum cleaner. Clean with a mild soap solution recom- mended for upholstery or carpets. Remove fresh spots immediately with a fabric spot cleaner. If fresh spots do not receive immediate attention, the fabric can be stained and its color can be affected. Also, its fire-resistant properties can be reduced if the material is not properly maintained. CAUTION Using anything but recommended cleaners and procedures may affect the fabric’s appearance and fire- resistant properties. G230203AUN Cleaning the lap/shoulder belt web- bing Clean the belt webbing with any mild soap solution recommended for cleaning upholstery or carpet. Follow the instruc- tions provided with the soap. Do not bleach or re-dye the webbing because this may weaken it. G230204AUN Cleaning the interior window glass If the interior glass surfaces of the vehi- cle become fogged (that is, covered with an oily, greasy or waxy film), they should be cleaned with glass cleaner. Follow the directions on the glass cleaner container. CAUTION Do not scrape or scratch the inside of the rear window.This may result in damage to the rear window defroster grid. EMISSION CONTROL SYSTEM G270000AFD The emission control system of your vehicle is covered by a written limited warranty. Please see the warranty infor- mation contained the Owner’s Handbook & Warranty Information book- let in your vehicle. Your vehicle is equipped with an emis- sion control system to meet all emission regulations. There are three emission control sys- tems which are as follows. in (1) Crankcase emission control system (2) Evaporative emission control system (3) Exhaust emission control system In order to assure the proper function of the emission control systems, it is rec- ommended that you have your car inspected and maintained by an author- ized HYUNDAI dealer in accordance with the maintenance schedule in this manu- al. for the Caution Inspection and Maintenance Test (With Electronic Stability Control (ESC) system) (cid:129) To prevent the vehicle from misfir- ing during dynamometer testing, turn the Electronic Stability Control (ESC) system off by pressing the ESC switch. (cid:129) After dynamometer testing is com- pleted, turn the ESC system back on by pressing the ESC switch again. G270100AUN 1. Crankcase emission control system The positive crankcase ventilation sys- tem is employed to prevent air pollution caused by blow-by gases being emitted from the crankcase. This system supplies fresh filtered air to the crankcase through the air intake hose. Inside the crankcase, the fresh air mixes with blow-by gases, which then pass through the PCV valve into the induction system. Maintenance 2. Evaporative emission control (including ORVR: Onboard Refueling Vapor Recovery) system The Evaporative Emission Control System is designed to prevent fuel vapors from escaping into the atmosphere. (The ORVR system is designed to allow the vapors from the fuel tank to be loaded into a canister while refueling at the gas station, preventing the escape of fuel vapors into the atmosphere.) G270201AUN Canister Fuel vapors generated inside the fuel tank are absorbed and stored in the onboard canister. When the engine is running, the fuel vapors absorbed in the canister are drawn into the surge tank through the purge control solenoid valve. G270202AUN Purge Control Solenoid Valve (PCSV) The purge control solenoid valve is con- trolled by the Engine Control Module (ECM); when the engine coolant temper- ature is low during idling, the PCSV clos- es so that evaporated fuel is not taken into the engine. After the engine warms- up during ordinary driving, the PCSV opens to introduce evaporated fuel to the engine. 7 69 Maintenance G270300AUN 3. Exhaust emission control system The Exhaust Emission Control System is a highly effective system which controls exhaust emissions while maintaining good vehicle performance. G270301AUN Vehicle modifications This vehicle should not be modified. Modification of your vehicle could affect its performance, safety or durability and may even violate governmental safety and emissions regulations. In addition, damage or performance problems resulting from any modification may not be covered under warranty. G270302AUN-EU Engine exhaust gas precautions (car- bon monoxide) (cid:129) Carbon monoxide can be present with other exhaust fumes. Therefore, if you smell exhaust fumes of any kind inside your vehicle, have it inspected and repaired immediately. If you ever sus- pect exhaust fumes are coming into your vehicle, drive it only with all the windows fully open. Have your vehicle checked and repaired immediately. 70 (cid:129) Do not operate the engine in confined or closed areas (such as garages) any more than what is necessary to move the vehicle in or out of the area. (cid:129) When the vehicle is stopped in an open area for more than a short time with the engine running, adjust the ventilation system (as needed) to draw outside air into the vehicle. (cid:129) Never sit in a parked or stopped vehi- cle for any extended time with the engine running. (cid:129) When the engine stalls or fails to start, excessive attempts to restart the engine may cause damage to the emission control system. WARNING - Exhaust Engine exhaust gases contain car- bon monoxide (CO). Though color- less and odorless, it is dangerous and could be lethal if inhaled. Follow the instructions on this page to avoid CO poisoning. CALIFORNIA PROPOSI- TION 65 WARNING Engine exhaust and a wide variety of automobile components and parts, including components found in the interior furnishings in a vehi- cle, contain or emit chemicals known to the State of California to cause cancer and birth defects and reproductive harm. In addition, cer- tain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. (cid:129) Do not operate the engine at high idle speed for extended periods (5 minutes or more). (cid:129) Do not modify or tamper with any part of the engine or emission control sys- tem. All inspections and adjustments must be made by an authorized HYUNDAI dealer. (cid:129) Avoid driving with a very low fuel level. If you run out of gasoline, it could cause the engine to misfire and result in excessive loading of the catalytic converter. Failure to observe these precautions could result in damage to the catalytic converter vehicle. Additionally, such actions could void your warranties. your and to G270303BFD Operating precautions for catalytic converters (if equipped) WARNING - Fire A hot exhaust system can ignite flammable items under your vehi- cle. Do not park, idle, or drive the vehicle over or near flammable objects, such as dry grass, paper, leaves, etc. Your vehicle is equipped with a catalytic converter emission control device. Therefore, the following precautions must be observed: (cid:129) Use only UNLEADED FUEL for gaso- line engine. (cid:129) Do not operate the vehicle when there are signs of engine malfunction, such as misfire or a noticeable loss of per- formance. (cid:129) Do not misuse or abuse the engine. Examples of misuse are coasting with the ignition off and descending steep grades in gear with the ignition off. Maintenance 7 71 Maintenance CALIFORNIA PERCHLORATE NOTICE G280000AEN Perchlorate Material-special handling may apply, See www.dtsc.ca.gov/haz- ardouswaste/perchlorate. Notice to California Vehicle Dismantlers: Perchlorate containing materials, such as air bag inflators, seatbelt pretensioners and keyless remote entry batteries, must be disposed of according to Title 22 California Code of Regulations Section 67384.10 (a). 72 Dimensions / 8-2 Bulb wattage / 8-2 Tires and wheels / 8-3 Recommended lubricants and capacities / 8-4 Vehicle identification number (VIN) / 8-7 Vehicle certification label / 8-7 Tire specification and pressure label / 8-8 Engine number / 8-8 Consumer information / 8-9 Reporting safety defects / 8-10 Binding arbitration / 8-10 Specifications, Consumer information, Reporting safety defects Specifications, Consumer information, Reporting safety defects DIMENSIONS I010000ACM Item Overall length Overall width Overall height Front tread Rear tread Wheelbase * with roof rack mm (in) 4650 (183.1) 1890 (74.4) 1725 (67.9)/1760 (69.3)* 1615 (63.6) 1620 (63.8) 2700 (106.3) BULB WATTAGE I030000ACM Light Bulb Wattage Headlights (Low) Headlights (High) Front turn signal lights / Position lights (Front side markers) Front fog lights* Stop and tail lights Tail lights Rear turn signal lights Back-up lights Rear side markers High mounted stop light* With spoiler Without spoiler License plate lights Map lamp Room lamp Luggage lamp* Glove box lamp* Vanity mirror lamp Door courtesy lamp * If equipped 55 55 27/8 27 27/8 27 16 LED 10 10 10 28 Specifications, Consumer information, Reporting safety defects TIRES AND WHEELS I020000ACM Item Tire size Inflation pressure psi (kPa) Wheel size Normal load Maximum load Wheel lug nut torque lb•ft (kg(cid:129)m, N(cid:129)m) Full size tire Compact spare tire (if equipped) P235/65R17 P235/60R18 7.0J×17 7.0J×18 T165/90R17 4.0T×17 Front 33 (230) 60 (420) Rear 33 (230) 60 (420) Front 38 (260) 60 (420) Rear 42 (290) 60 (420) 65~79 (9~11, 88~107) 8 3 Specifications, Consumer information, Reporting safety defects RECOMMENDED LUBRICANTS AND CAPACITIES I040000ACM-EU To help achieve proper engine and powertrain performance and durability, use only lubricants of the proper quality. The correct lubricants also help promote engine efficiency that results in improved fuel economy. These lubricants and fluids are recommended for use in your vehicle. Lubricant Volume Classification Engine oil *1 *2 (drain and refill) Recommends 2.4 Engine 4.86 US qt. (4.6 l) 3.5 Engine 5.49 US qt. (5.2 l) API Service SM*3, ILSAC GF-4 or above Manual transaxle fluid 2.4 Engine 1.90 US qt. (1.8 l) API GL-4, SAE 75W/85 Automatic transaxle fluid Power steering Coolant 2.4 Engine 7.50 US qt. (7.1 l) 3.5 Engine 8.24 US qt. (7.8 l) 2.4 Engine 3.5 Engine MT AT AT 1.06 US qt. (1.0 l) 6.87 US qt. (6.5 l) 6.97 US qt. (6.6 l) 9.09 US qt. (8.6 l) MICHANG ATF SP-IV, SK ATF SP-IV NOCA ATF SP-IV, HYUNDAI genuine ATF SP-IV or other brands meeting the above specification approved by Hyundai Motor Co., PSF-3 Mixture of antifreeze and distilled water (Ethylene glycol base coolant for aluminum radiator) 48 Specifications, Consumer information, Reporting safety defects Lubricant Volume Classification Brake/clutch fluid 6.97 US qt. (6.6 l) FMVSS116 DOT-3 or DOT-4 Rear differential oil (AWD) 0.74 US qt. (0.7 l) Transfer case oil (AWD) 2.4 Engine 0.63 US qt. (0.6 l) 3.5 Engine 0.74 US qt. (0.7 l) HYPOID GEAR OIL API GL-5, SAE 75W/90 (SHELL SPIRAX X or equivalent) HYPOID GEAR OIL API GL-5, SAE 75W/90 (SHELL SPIRAX X or equivalent) Fuel 17.96 US gal. (68 l) Refer to “Fuel requirements” in section 1 *1 Refer to the recommended SAE viscosity numbers on the next page. *2 Engine oils labeled Energy Conserving Oil are now available. Along with other additional benefits, they contribute to fuel economy by reducing the amount of fuel necessary to overcome engine friction. Often, these improvements are difficult to measure in everyday driving, but in a year’s time, they can offer significant cost and energy savings. *3 If the API service SM engine oil is not available in your country, you are able to use API service SL. MT : Manual transaxle AT : Automatic transaxle 8 5 Specifications, Consumer information, Reporting safety defects I040100AXM Recommended SAE viscosity number CAUTION Always be sure to clean the area around any filler plug,drain plug,or dipstick before checking or drain- ing any lubricant.This is especially important in dusty or sandy areas and when the vehicle is used on unpaved roads. Cleaning the plug and dipstick areas will prevent dirt and grit from entering the engine and other mechanisms that could be damaged. Engine oil viscosity (thickness) has an effect on fuel economy and cold weather operating (engine start and engine oil flowability). Lower viscosity engine oils can provide better fuel economy and cold weather performance, however, higher viscosity engine oils are required for sat- isfactory lubrication in hot weather. Using oils of any viscosity other than those rec- ommended could result in engine dam- age. When choosing an oil, consider the range of temperature your vehicle will be oper- ated in before the next oil change. Proceed to select the recommended oil viscosity from the chart. Temperature Gasoline Engine Oil *1 Temperature Range for SAE Viscosity Numbers °C (°F) -30 -20 -10 0 10 20 30 40 50 -10 0 20 40 60 80 100 120 10W-30 5W-20, 5W-30 *1 : For better fuel economy, it is recommended to use the engine oil of a viscosity grade SAE 5W-20 (API SM / ILSAC GF-4). However, if the engine oil is not available in your country, select the proper engine oil using the engine oil viscosity chart. 68 VEHICLE IDENTIFICATION NUMBER (VIN) Frame number VIN label VEHICLE CERTIFICATION LABEL Specifications, Consumer information, Reporting safety defects OCM080001 H010000AEN The vehicle identification number (VIN) is the number used in registering your vehi- cle and in all legal matters pertaining to its ownership, etc. The number is punched on the engine compartment bulkhead. OEN086004N The VIN is also on a plate attached to the top of the dashboard. The number on the plate can easily be seen through the windshield from outside. OCM056002 H020000AEN The vehicle certification label attached on the driver’s side center pillar gives the vehicle identification number (VIN). 8 7 Specifications, Consumer information, Reporting safety defects TIRE SPECIFICATION AND PRESSURE LABEL ENGINE NUMBER ■ Gasoline engine (2.4L) OCM070048L The tires supplied on your new vehicle are chosen to provide the best perform- ance for normal driving. The tire label located on the driver's side center pillar gives the tire pressures rec- ommended for your vehicle. ■ Gasoline engine (3.5L) OCM080003 OXM089006L The engine number is stamped on the engine block as shown in the drawing. 88 CONSUMER INFORMATION H050000AEN This consumer information has been pre- pared in accordance with regulations issued by the National Highway Traffic Safety Administration of the U.S. Department of Transportation. Your Hyundai dealer will help answer any questions you may have as you read this information. Hyundai motor vehicles are designed and manufactured to meet or exceed all applicable safety standards. For your safety, however, we strongly urge you to read and follow all directions in this Owner's Manual, particularly the information headings "NOTICE", "CAUTION" and "WARN- ING". under the If, after reading this manual, you have any questions regarding the operation of your vehicle, please contact your nearest Hyundai Motor America Regional Office as listed in the following: Specifications, Consumer information, Reporting safety defects Eastern Region: Connecticut, Delaware, Maine, Massachusetts, New Hampshire, New Jersey, New York, Pennsylvania, Rhode Island, Vermont. Central Region: Illinois, Indiana, lowa, Kentucky, Minnesota, Nebraska, North Dakota, South Dakota, Ohio, Wisconsin, Kansas, Missouri. Michigan, Eastern Region 1100 Cranbury South River Road Jamesburg, NJ 08831 (800) 633-5151 Central Region 1705 Sequoia Drive Aurora, Illinois 60506 (800) 633-5151 Southern Region: Florida, Georgia, North Carolina, South Carolina. Southern Region 270 Riverside Parkway, Suite A Austell, GA 30168 (800) 633-5151 South Central Region: Alabama, Arkansas, Louisiana, Mississippi, Missouri, New Mexico, Oklahoma, Tennessee, Texas. South Central Region 1421 South Beltline Road, Suite 400 Coppell, TX 75019 (800) 633-5151 Western Region: Alaska, Hawaii, Arizona, Colorado, ldaho, Montana, Nevada, Oregon, Utah, Washington, Wyoming. Western Region 10550 Talbert Avenue P.O.Box 20850 Fountain Valley, California 92728-0850 (800) 633-5151 California Region: California California Region 10550 Talbert Avenue P.O. Box 20850 Fountain Valley, California 92728-0850 (800) 633-5151 8 9 Specifications, Consumer information, Reporting safety defects REPORTING SAFETY DEFECTS BINDING ARBITRATION (U.S.A ONLY) H070000AEN If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying HYUNDAI MOTOR AMERICA. If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or HYUNDAI MOTOR AMERICA. To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888- 327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov; or write to: Administrator, NHTSA, 400 Seventh Street, SW., Washington, DC 20590. You can also obtain other information about motor from http://www.safercar.gov. H090000AEN Any claim or dispute you may have relat- ed to your vehicle's warranty or the duties contemplated under the warranty, includ- ing claims related to the refund or partial refund of your vehicle's purchase price (excluding personal injury or product lia- bility claims), shall be resolved by binding arbitration. Binding arbitration shall be administered by and through the National Arbitration Forum (NAF) or the American Arbitration Association (AAA), under the Code of Procedure of the entity you select. You will not be responsible for paying fil- ing and hearing fees above $275.00. All other arbitration costs shall be borne by Hyundai Motor America. You are not responsible to pay any of the costs Hyundai incurs. This Binding Arbitration Agreement shall not deprive you of any remedies avail- able to you under applicable law. The parties are waiving their right to seek remedies in court, including the right to a jury trial. vehicle safety revoke This Binding Arbitration Agreement shall be governed by and interpreted under the Federal Arbitration Act, 9 U.S.C. sec- tions 1-16. Judgment upon any award may be entered in any court having juris- diction. this Arbitration You may Agreement by (1) written notice or (2) electronic notice. Written notice must be delivered (via certified mail) to Hyundai Motor America, Attn: Consumer Affairs, 10550 Talbert Avenue, P.O. Box 20849, Fountain Valley, CA 92728-0849. Electronic notice must be submitted at the following website address: http://war- ranty-arbitration.hyundaiUSA.com. Notice must be received within 90 days after you purchase your vehicle. 10 Index Index Air bags-advanced supplemental restraint system ········3-36 Air bag warning label··················································3-62 Air bag warning light ··················································3-59 Curtain air bag ·····························································3-50 Driver's and passenger's front air bag··························3-45 Occupant classification system ···································3-40 Side impact air bag······················································3-49 Air cleaner ·····································································7-22 All wheel drive (AWD)··················································5-16 Appearance care·····························································7-63 Exterior care ································································7-63 Interior care ·······························································7-668 Audio system ·································································4-99 Antenna········································································4-99 Steering wheel audio control·······································4-99 Automatic climate control system ·································4-76 Air conditioning ··························································4-82 Automatic heating and air conditioning······················4-77 Manual heating and air conditioning···························4-67 Automatic transaxle ·······················································5-10 Ignition key interlock system ······································5-12 Shift lock system ·························································5-13 Sports mode·································································5-14 Battery············································································7-29 Before driving ··································································5-3 Brake system··································································5-23 Anti-lock brake system (ABS) ···································5-26 Electronic stability control (ESC) ······························5-28 Parking brake······························································5-24 Power brakes ······························································5-23 Brake fluid ·····································································7-18 Bulb wattage ····································································8-2 California Perchlorate Notice ······································· 7-72 Child restraint system ····················································3-28 Placing a passenger seat belt into the auto lock mode ····················································3-30 Securing a child restraint seat with tether anchor system··················································3-32 Securing a child restraint seat with child seat lower anchor system ·································3-34 Climate control air filter ················································7-24 Consumer information ·····················································8-9 Cruise control system ····················································5-33 2I D Defroster ········································································4-66 Dimensions ······································································8-2 Door locks······································································4-14 Central door lock switch ···············································4-8 Child-protector rear door lock·····································4-10 Economical operation ····················································5-37 Emergency starting ··························································6-4 Jump starting ·································································6-4 Push starting ··································································6-5 Emission control system················································7-69 Crankcase emission control system·····························7-69 Evaporative emission control (including ORVR: Onboard Refueling Vapor Recovery) System ···········7-69 Exhaust emission control system ································7-70 Engine compartment ················································2-4, 7-2 Engine coolant ·······························································7-15 Engine number·································································8-8 Engine oil·······································································7-14 Explanation of scheduled maintenance items ···············7-11 Exterior features·····························································4-98 Roof rack ·····································································4-98 Index Fuel filler lid ··································································4-19 Fuel requirements ····························································1-2 Fuses ··············································································7-45 Fuse/relay panel description········································7-49 Main fuse·····································································7-48 Memory fuse································································7-47 Hazard warning flasher··················································4-56 Hood···············································································4-17 How to use this manual ···················································1-2 If the engine overheats·····················································6-6 If the engine will not start ···············································6-3 If you have a flat tire ·····················································6-13 Changing tires······························································6-16 Compact spare tire·······················································6-20 Jack and tools ······························································6-13 Removing and storing the spare tire····························6-13 I 3 K Key positions ···································································5-4 Illuminated ignition switch············································5-4 Keys ·················································································4-2 Light bulbs ·····································································7-55 Headlight, position light, turn signal light, side marker light and front fog light bulb replacement····7-56 High mounted stop light replacement ·························7-61 Interior light bulb replacement ····································7-62 License plate light bulb replacement···························7-61 Door courtesy lamp bulb replacement ························7-61 Rear combination light bulb replacement ···················7-59 Lighting··········································································4-57 Battery saver function··················································4-57 Index In case of an emergency while driving····························6-2 Indicator symbols on the instrument cluster ···················1-6 Instrument cluster ··························································4-40 Engine temperature gauge ···········································4-42 Fuel gauge ···································································4-43 Instrument panel illumination ·····································4-41 Odometer/Tripmeter ····················································4-43 Speedometer ································································4-41 Tachometer ··································································4-41 Trip computer ······························································4-45 Warning and indicators················································4-48 Instrument panel overview···············································2-3 Interior features······························································4-89 AC inverter ··································································4-93 Ashtray ········································································4-89 Aux, USB and iPod ·····················································4-95 Cargo security screen ·················································4- 96 Cigarette lighter ···························································4-89 Clothes hanger·····························································4-95 Cup holder ···································································4-90 Digital clock ································································4-94 Floor mat anchor(s) ·····················································4-95 Luggage net (holder) ·················································4-119 Outside thermometer ···················································4-80 Power outlet·································································4-92 Sunvisor ·······································································4-91 Interior light ···································································4-63 Interior overview······························································2-2 4I M Maintenance services·······················································7-3 Manual climate control system······································4-67 Air conditioning ··························································4-72 Climate control air filter··············································4-74 Heating and air conditioning ·······································4-68 Electric chromic mirror (ECM) with compass············4-28 Electric chromic mirror (ECM) with compass and HomeLink® system ··················································4-31 Inside rearview mirror ·················································4-28 Outside rearview mirror ··············································4-38 Manual transaxle······························································5-7 Owner maintenance ·························································7-4 Parking brake ·································································7-21 Power steering fluid·······················································7-19 Index Rear seat entertainment system (RSE) ························4-153 Rearview camera····························································4-56 Recommended lubricants and capacities·························8-4 Recommended SAE viscosity number··························8-6 Remote keyless entry·······················································4-3 Reporting safety defects ················································8-10 Road warning···································································6-2 Scheduled maintenance service ·······································7-6 Normal maintenance schedule·······································7-7 Maintenance under severe usage conditions ···············7-10 Seat belts········································································3-17 Pre-tensioner seat belt ·················································3-22 Seat belt - Driver's 3-point system with emergency locking retractor······································3-18 Seat belts - Front passenger and rear seat 3-point system with combination locking retractor ··3-20 Seat belt warning ·························································3-18 Seats ·················································································3-2 Armrest ········································································3-14 Headrest································································3-8, 3-12 Folding the rear seat ····················································3-14 Front seat adjustment - manual ·····································3-5 Front seat adjustment - power ·······································3-6 I 5 Index Lumbar support ·····························································3-6 Rear seat adjustment····················································3-12 Seatback pocket ···························································3-11 Seat warmer ·································································3-10 Special driving conditions ·············································5-39 Driving at night ···························································5-40 Driving in flooded areas ··············································5-41 Driving in the rain ·······················································5-41 Hazardous driving conditions······································5-39 Highway driving ··························································5-42 Rocking the vehicle ·····················································5-39 Smooth cornering ························································5-40 Starting the engine ···························································5-5 Steering wheel ·······························································4-26 Horn·············································································4-27 Power steering ·····························································4-26 Tilt steering··································································4-26 Storage compartment ·····················································4-86 Center console storage·················································4-86 Glove box ····································································4-86 Multi box ·····································································4-87 Luggage box ································································4-88 Sunglass holder····························································4-87 Sunroof···········································································4-22 6I Tailgate···········································································4-11 Theft-alarm system ··························································4-5 Tires pressure monitoring system (TPMS)······················6-7 Changing a tire with TPMS·········································6-10 Low tire pressure telltale ···············································6-8 TPMS (Tire pressure monitoring system) malfunction indicator ··················································6-9 Tire specification and pressure label ·······························8-8 Tires and wheels·····················································7-32, 8-3 All season tires ····························································7-43 Checking tire inflation pressure ··································7-34 Compact spare tire replacement ··································7-36 Radial-ply tires ····························································7-44 Recommended cold tire inflation pressures ················7-32 Snow tires ····································································7-43 Summer tires································································7-43 Tire care·······································································7-32 Tire chains ···································································7-44 Tire maintenance ·························································7-38 Tire replacement ··························································7-36 Tire rotation ·································································7-35 Tire sidewall labeling ··················································7-38 Tire terminology and definitions ·································7-41 Tire traction ·································································7-38 Wheel alignment and tire balance ·······························7-36 Wheel replacement ······················································7-36 Towing ···········································································6-22 Emergency towing ·······················································6-23 Trailer towing·································································5-47 Driving with a trailer ···················································5-49 Hitches·········································································5-48 Safety chains································································5-48 Trailer brakes·······························································5-48 Weight of the trailer (tongue) ······································5-54 Vehicle break-in process··················································1-5 Vehicle certification label ················································8-7 Vehicle data collection and event data recorders·············1-5 Vehicle identification number (VIN)·······························8-7 Vehicle load limit···························································5-56 Cargo capacity ·····························································5-56 Certification label ························································5-58 Seating capacity···························································5-56 Tire and loading information label······························5-56 Towing capacity···························································5-56 Vehicle capacity weight···············································5-56 Index Vehicle weight ·······························································5-60 Base curb weight ·························································5-60 Cargo weight ·······························································5-60 GAW (Gross axle weight) ···········································5-60 GAWR (Gross axle weight rating) ······························5-60 GVW (Gross vehicle weight)······································5-60 GVWR (Gross vehicle weight rating)·························5-60 Washer fluid···································································7-20 Windows ········································································4-13 Auto up/down window ················································4-14 Power window lock button··········································4-15 Windshield defrosting and defogging····························4-83 Defogging logic···························································4-85 Winter driving································································5-43 Snow tires ····································································5-43 Tire chains ···································································5-44 Wiper blades ··································································7-26 Wipers and washers ·······················································4-61 I 7

Boost Classifieds - Car Advice, Reviews, Events & Classifieds

2010 Hyundai Santa FE Owners Manual