Login- Download PDF Manual
-
Reporting safety defects Index
Introduction
How to use this manual / 1-2
Fuel requirements / 1-3
Vehicle break-in process / 1-5
Vehicle data collection and event datarecorders / 1-6
Indicator symbols on the instrument cluster / 1-7
Introduction
HOW TO USE THIS MANUAL A010000AHM We want to help you get the greatest possible driving pleasure from your vehi- cle. Your Owner’s Manual can assist you in many ways. We strongly recommend that you read the entire manual. In order to minimize the chance of death or injury, you must read the WARNING and CAU- TION sections in the manual. Illustrations complement the words in this manual to best explain how to enjoy your vehicle. By reading your manual, you will learn about features, important safety information, and driving tips under vari- ous road conditions.
The general layout of the manual is pro- vided in the Table of Contents. A good place to start is the index; it has an alpha- betical listing of all information in your manual. Sections: This manual has eight sections plus an index. Each section begins with a brief list of contents so you can tell at a glance if that section has the information you want.
You will find various WARNINGS, CAU- TIONS, and NOTICES in this manual. These WARNINGS were prepared to enhance your personal safety.You should carefully read and follow ALL procedures and recommendations provided in these WARNINGS, CAUTIONS and NOTICES.
WARNING
A WARNING indicates a situation in which harm, serious bodily injury or death could result if the warning is ignored.
CAUTION
A CAUTION indicates a situation in which damage to your vehicle could result if the caution is ignored.
✽✽ NOTICE A NOTICE indicates interesting or help- ful information is being provided.
21
FUEL REQUIREMENTS A020101ABH-EU 3.8 engine Your new vehicle is designed to use only unleaded fuel having a pump octane number ((R+M)/2) of 87 (Research Octane Number 91) or higher.
4.6 engine Your new vehicle is designed to use only unleaded fuel having a pump octane number ((R+M)/2) of 87 or higher.
For improved vehicle performance, pre- mium unleaded fuel with a Pump Octane Rating of 91 (Research Octane Number 95) or higher is recommended.
Your new vehicle is designed to obtain maximum performance with UNLEADED FUEL, as well as minimize exhaust emis- sions and spark plug fouling.
CAUTION
Never add any fuel system cleaning agents to the fuel tank other than what has been specified. (Consult an authorized HYUNDAI dealer for details.)
WARNING
• Do not "top off" after the nozzle automatically shuts off when refueling.
(cid:129) Tighten the cap until it clicks one time, otherwise the Malfunction Indicator Light “ ” will illumi- nate.
(cid:129) Always check that the fuel cap is installed securely to prevent fuel spillage in the event of an acci- dent.
Introduction
A020103AUN-EU Gasoline containing alcohol and methanol Gasohol, a mixture of gasoline and ethanol (also known as grain alcohol), and gasoline or gasohol containing methanol (also known as wood alcohol) are being marketed along with or instead of leaded or unleaded gasoline. Do not use gasohol containing more than 10% ethanol, and do not use gasoline or gasohol containing any methanol. Either of these fuels may cause drivability prob- lems and damage to the fuel system. Discontinue using gasohol of any kind if drivability problems occur. Vehicle damage or drivability problems may not be covered by the manufactur- er’s warranty if they result from the use of: 1. Gasohol containing more than 10%
ethanol.
2. Gasoline or gasohol containing
methanol.
3. Leaded fuel or leaded gasohol.
1 3
A020105AUN Do not use methanol Fuels containing methanol (wood alco- hol) should not be used in your vehicle. This type of fuel can reduce vehicle per- formance and damage components of the fuel system.
CAUTION
Your New Vehicle Limited Warranty may not cover damage to the fuel system and any performance prob- lems that are caused by the use of fuels containing methanol.
A020106AEN Gasolines for cleaner air To help contribute to cleaner air, HYUNDAI recommends you use gaso- lines treated with detergent additives, which help prevent deposit formation in the engine. These gasolines will help the engine run cleaner and enhance per- formance of the Emission Control System.
A020107AUN Operation in foreign countries If you are going to drive your vehicle in another country, be sure to: (cid:129) Observe all regulations regarding reg-
istration and insurance.
(cid:129) Determine that acceptable fuel is avail-
able.
Introduction
"E85" fuel is an alternative fuel com- prised of 85 percent ethanol and 15 per- cent gasoline, and is manufactured exclusively for use in Flexible Fuel Vehicles. “E85” is not compatible with your vehicle. Use of “E85” may result in poor engine performance and damage to your vehicle's engine and fuel system. HYUNDAI recommends that customers do not use fuel with an ethanol content exceeding 10 percent.
CAUTION
Your New Vehicle Limited Warranty does not cover damage to the fuel system or any performance prob- lems caused by the use of “E85”fuel.
CAUTION
Never use gasohol which contains methanol. Discontinue use of any gasohol product which impairs dri- vability.
41
VEHICLE BREAK-IN PROCESS A030000BUN No special break-in period is needed. By following a few simple precautions for the first 600 miles (1,000 km) you may add to the performance, economy and life of your vehicle. (cid:129) Do not race the engine. (cid:129) While driving, keep your engine speed (rpm, or revolutions per minute) between 2,000 rpm and 4,000 rpm.
(cid:129) Do not maintain a single speed for long periods of time, either fast or slow. Varying engine speed is needed to properly break-in the engine.
(cid:129) Avoid hard stops, except in emergen- cies, to allow the brakes to seat prop- erly.
(cid:129) Don't let the engine idle longer than 3
minutes at one time.
(cid:129) Don't tow a trailer during the first 1,200
miles (2,000 km) of operation.
CALIFORNIA PROPOSI- TION 65 WARNING
Items contained in motor vehicles or emitted from them are known to the State of California to cause can- cer and birth defects or reproduc- tive harm. These include: (cid:129) Gasoline and its vapors (cid:129) Engine exhaust (cid:129) Used engine oil (cid:129) Interior passenger compartment
components and materials
(cid:129) Component parts which are sub-
ject to heat and wear
In addition, battery posts, terminals and related accessories contain lead, lead compounds and other chemicals known to the State of California to cause cancer and reproductive harm.
Introduction
1 5
Introduction
VEHICLE DATA COLLECTION AND EVENT DATA RECORDERS A040000AFD This vehicle is equipped with an event data recorder (EDR). The main pur- pose of an EDR is to record, in certain crash or near crash-like situations, such as an air bag deployment or hit- ting a road obstacle, data that will assist in understanding how a vehi- cle's systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30
seconds or less. The EDR in this vehi- cle is designed to record such data as: (cid:129) How various systems in your vehicleThese data can help provide a better understanding of the circumstances in which crashes and injuries occur. NOTE: EDR data are recorded by your vehicle only if a nontrivial crash situa- tion occurs; no data are recorded by the EDR under normal driving condi- tions and no personal data (e.g., name, gender, age, and crash loca- tion) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation.
were operating;
To read data recorded by an EDR, spe- cial equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufactur- er, other parties, such as law enforce- ment, that have the special equip- ment, can read the information if they have access to the vehicle or the EDR.
(cid:129) Whether or not the driver and pas- were
belts
senger safety buckled/fastened;
(cid:129) How far (if at all) the driver was depressing the accelerator and/or brake pedal; and,
(cid:129) How fast the vehicle was traveling.
61
INDICATOR SYMBOLS ON THE INSTRUMENT CLUSTER A050000ABH-EU
Door ajar warning light
Malfunction indicator light
Trunk ajar warning light
Introduction
Seat belt warning light
Air bag warning light
High beam indicator
Cruise indicator (if equipped)
EPB
AUTO HOLD
AFLS OFF
EPB malfunction indicator (if equipped)
AUTO HOLD indicator (if equipped)
AFLS malfunction indicator (if equipped)
Tail light indicator
Cruise SET indicator (if equipped)
SCC malfunction indicator (if equipped)
SCC sensor malfunction indica- tor (if equipped)
TPMS (Tire Pressure Monitoring System) malfunction indicator
Turn signal indicator
ESC
ESC indicator
ESC OFF
ESC OFF indicator
ABS warning light
Immobilizer indicator
Low tire pressure telltale
Parking brake & Brake fluid warning light
Low fuel level warning light
Low tire pressure position tell- tale (if equipped)
Engine oil pressure warning light
LDWS
LDWS indicator (if equipped)
Low windshield washer fluid level warning light (if equipped)
LDWS FAIL
LDWS malfunction indicator (if equipped)
Charging system warning light
Front fog light indicator (if equipped)
* For more detailed explanations, refer to “Instrument cluster” in section 4.
1 7
Your vehicle at a glance
Interior overview / 2-2
Instrument panel overview / 2-3
Engine compartment / 2-4Your vehicle at a glance
INTERIOR OVERVIEW
1. Door lock/unlock button ....................4-16
2. Power window switches ....................4-23
3. Outside rearview mirror controlswitch ................................................4-46
4. Trunk lid release switch.....................4-20
5. Fuel filler lid release button...............4-28
6. Hood release lever............................4-27
7. Foot parking brake* ..........................5-19
8. Electronic parking brake*..................5-21
9. Auto hold control button* ..................5-25
10. Brake pedal.....................................5-18
11. Accelerator pedal .....................5-6, 5-9
12. Parking assist button* .....................4-71
13. Adaptive front lighting systemOFF button* ....................................4-79
14. Lane departure warning system
switch*.............................................5-50
15. ESC OFF button .............................5-30
16. Instrument panel illumination controlknob ................................................4-50
17. Light control/Turn signals................4-75
18. Steering wheel manual tilt or Power tilt/ telescope control* ...........................4-38
19. Steering wheel ................................4-37
* : if equippedB010000ABH-EU
22
OBH011001N
INSTRUMENT PANEL OVERVIEW
Your vehicle at a glance
1. Instrument cluster.............................4-47
2. Horn .................................................4-38
3. Driver’s front air bag.........................3-44
4. Wiper/Washer...................................4-80
5. Ignition switch or Engine start/stopbutton*.........................................5-4, 5-7
6. Climate control system.....................4-87
7. Digital clock ....................................4-106
8. Hazard warning flasher switch..4-74, 6-2
9. Shift lever .........................................5-11
10. Central control panel*...................4-110
11. Seat warmer or Climate control seat*..................................................3-7, 3-8
12. Passenger’s front air bag ...............3-44
* : if equippedB020000ABH-EU
OBH019002N
2 3
Your vehicle at a glance
ENGINE COMPARTMENT
■■ 3.8 Engine
1. Engine coolant reservoir...................7-17
2. Radiator cap .....................................7-18
3. Brake fluid reservoir..........................7-19
4. Air cleaner.........................................7-22
5. Engine oil dipstick .............................7-15
6. Engine oil filler cap ...........................7-15
7. Windshield washer fluid reservoir .....7-21
8. Fuse box ...........................................7-44
9. Power steering fluid reservoir(with EHPS) ......................................7-20
10. Power steering fluid reservoir
(without EHPS) ...............................7-20
11. Jumper terminal ................................6-4* The actual engine compartment in the vehicle may differ from the illustration.
OBH018003L
B030000ABH
42
■■ 4.6 Engine
* The actual engine compartment in the vehicle may differ from the illustration.
Your vehicle at a glance
1. Engine coolant reservoir...................7-17
2. Radiator cap .....................................7-18
3. Brake fluid reservoir..........................7-19
4. Air cleaner.........................................7-22
5. Engine oil dipstick .............................7-15
6. Engine oil filler cap ...........................7-15
7. Windshield washer fluid reservoir .....7-21
8. Fuse box ...........................................7-44
9. Power steering fluid reservoir(with EHPS) ......................................7-20
10. Power steering fluid reservoir
(without EHPS) ...............................7-20
11. Jumper terminal ................................6-4OBH018005N
2 5
Seats / 3-2
Seat belts / 3-14
Child restraint system / 3-25
Air bag - advanced supplemental restraint system / 3-33Safety features of your vehicle
Safety features of your vehicle
SEATS
Driver’s seat (1) Forward and backward/Seat cushion
height
(2) Seatback angle (3) Lumbar support (4) Seat warmer or Climate control seat* (5) Headrest (6) Driver position memory system*
Front passenger’s seat (7) Forward and backward (8) Seatback angle* (9) Seat warmer* (10) Headrest
Rear seat (11) Armrest (12) Headrest
*: if equipped
C010000ABH-EU
23
OBH031001N
WARNING - Loose objects Loose objects in the driver’s foot area could interfere with the opera- tion of the foot pedals, possibly causing an accident. Do not place anything under the front seats.
WARNING - Driver respon- sibility for passengers
Riding in a vehicle with the seat- back reclined could lead to serious or fatal injury in an accident. If a seat is reclined during an accident, the occupant’s hips may slide under the lap portion of the seat belt applying great force to the unprotected abdomen. Serious or fatal internal injuries could result. The driver must advise the passen- ger to keep the seatback in an upright position whenever the vehi- cle is in motion.
WARNING - Driver’s seat
(cid:129) Never attempt to adjust the seat while the vehicle is moving. This could result in loss of control, and an accident causing death, serious injury, or property dam- age.
(cid:129) Do not allow anything to interfere with the normal position of the seatback. Storing items against a seatback or in any other way interfering with proper locking of a seatback could result in serious or fatal injury in a sudden stop or collision.
(cid:129) Always drive and ride with your seatback upright and the lap por- tion of the seat belt snug and low across the hips. This is the best position to protect you in case of an accident.
(cid:129) In order to avoid unnecessary and perhaps severe air bag injuries, always sit as far back as possible from the steering wheel while maintaining comfortable control of the vehicle. We recom- mend that your chest be at least 10 inches (250 mm) away from the steering wheel.
Safety features of your vehicle
C010200AEN Front seat adjustment - power The front seat can be adjusted by using the control knob located on the outside of the seat cushion. Before driving, adjust the seat to the proper position so as to easily control the steering wheel, pedals and switches on the instrument panel.
WARNING
The power seat is operable with the ignition OFF. Therefore, children should never be left unattended in the car.
3 3
Safety features of your vehicle
CAUTION
(cid:129) The power seat is driven by an electric motor. Stop operating once the adjustment is complet- ed. Excessive operation may damage the electrical equipment. (cid:129) When in operation, the power seat consumes a large amount of electrical power. To prevent unnecessary charging system drain,don’t adjust the power seat longer than necessary while the engine is not running.
(cid:129) Do not operate two or more power seat control knobs at the same time. Doing so may result in power seat motor or electrical component malfunction.
43
OBH031002N
OBH031003N
C010201AUN Forward and rearward Push the control knob forward or rear- ward to move the seat to the desired position. Release the knob once the seat reaches the desired position.
C010202ABH Seatback angle (if equipped) Push the control knob forward or rear- ward to move the seatback to the desired angle. Release the knob once the seat reaches the desired position.
Safety features of your vehicle
OBH031004N
OBH031005N
OBH038075L
C010203ABH Seat cushion height (for driver’s seat) Pull the front portion of the control knob up to raise or push down to lower the front part of the seat cushion. Pull the rear portion of the control knob up to raise or push down to lower the rear part of the seat cushion. Release the knob once the seat reaches the desired posi- tion.
C010204ABH Lumbar support (for driver’s seat) The lumbar support can be adjusted by pressing the lumbar support switch on the side of the drivers seat. Press the front portion of the switch (1) to increase support, or the rear portion of the switch (2), to decrease support. Move the support position up and down by pressing the switch (3) or (4).
C010104ABH-EU Headrest The driver's and front passenger's seats are equipped with a headrest for the occupant's safety and comfort. The headrest not only provides comfort for the driver and front passenger, but also helps to protect the head and neck in the event of a collision.
3 5
Safety features of your vehicle
WARNING
(cid:129) For maximum effectiveness in case of an accident, the headrest should be adjusted so the middle of the headrest is at the same height as the center of gravity of an occupant's head. Generally, the center of gravity of most peo- ple's head is similar with the height of the top of their eyes. Also, adjust the headrest as close to your head as possible. For this reason, the use of a cushion that holds the body away from the seatback is not recommended.
(cid:129) Do not operate the vehicle with the headrests removed as severe injury to the occupants may occur in the event of an accident. Headrests may provide protec- tion against neck injuries when properly adjusted.
(cid:129) Do not adjust the headrest posi- tion of the driver's seat while the vehicle is in motion.
63
OBH038006L
OBH038007L
Forward and rearward adjustment The headrest may be adjusted forward or rearward by pulling the lower part of the headrest forward or rearward to the desired detent in the direction of the arrow. Adjust the headrest so that it prop- erly supports the head and neck.
Adjusting the height up and down To raise the headrest, pull it up to the desired position (1). To lower the head- rest, push and hold the release button (2) on the headrest support and lower the headrest to the desired position (3).
Removal For your safety, the front headrest can’t be removed. If there is any problem with the front headrest, take your vehicle to an authorized HYUNDAI dealer and have the system checked.
WARNING
Do not operate the vehicle with the headrests removed as severe injury to the occupants may occur in the event of an accident. Headrests may provide protection against neck injuries when properly adjust- ed.
Safety features of your vehicle
OBH038069
OBH031009E
Electronic active headrest (if equipped) The electronic active headrest is designed to trigger the headrest forward and upward when impact sensor detects a rear impact. This helps to prevent the driver's and front passenger’s heads from moving backward and thus helps minimize neck injuries.
CAUTION
The active headrest is a safety device to reduce injuries from a rear impact. Do not hit or pull the headrest intentionally.
C010107ABH Seat warmer (if equipped) The seat warmer is provided to warm the front seats during cold weather. While the engine is running, push either of the switches to warm the driver's seat or the front passenger's seat. During mild weather or under conditions where the operation of the seat warmer is not needed, keep the switches in the OFF position. (cid:129) Each time you push the switch, the temperature setting of the seat is changed as follows :
OFF→HIGH( →
)→MIDDLE(
)→LOW(
3 7
Safety features of your vehicle
(cid:129) When pressing the switch for more than 1.5 seconds with the seat warmer operating, the seat warmer will turn OFF.
(cid:129) The seat warmer defaults to the OFF position whenever the ignition switch is turned on. ✽✽ NOTICE With the seat warmer switch in the ON position, the heating system in the seat turns off or on automatically depending on the seat temperature.
CAUTION
(cid:129) When cleaning the seats, do not use an organic solvent such as paint thinner, benzene, alcohol and gasoline.Doing so may dam- age the surface of the heater or seats.
(cid:129) To prevent overheating the seat warmer, do not place blankets, cushions or seat covers on the seats while the seat warmer is in operation.
(cid:129) Do not place heavy or sharp objects on seats equipped with seat warmers.Damage to the seat warming components could occur.
83
WARNING - Seat warmer
burns
Passengers should use extreme caution when using seat warmers due to the possibility of excess heating or burns. The occupants must be able to feel if the seat is becoming too warm and to turn the seat warmer off. In particular, the driver must exercise extreme care for the following types of passen- gers: 1. Infants, children, elderly or dis- abled persons, or hospital outpa- tients
2. Persons with sensitive skin or
those that burn easily
3. Fatigued individuals 4. Intoxicated individuals 5. Individuals taking medication that can cause drowsiness or sleepiness (sleeping pills, cold tablets, etc.)
OBH038009N
C010109ABH-EU Climate control seat (if equipped) The climate control seat is provided to cool or warm the driver’s seat during hot or cold weather by blowing air through small vent holes on the surface of the seat and seatback. While the engine is running, push the rear portion of the switch to cool the driver's seat, and push the front portion of the switch to warm the driver’s seat. When the operation of the climate control seat is not needed, keep the switch in the OFF position.
(cid:129) Each time you push the switch, the air-
flow is changed as follows:
OFF→HIGH( →
)→MIDDLE(
)→LOW(
(cid:129) When pressing the switch for more than 1.5 seconds with the climate con- trol seat operating, the climate control seat will turn OFF.
(cid:129) The climate control seat defaults to the OFF position whenever the ignition switch is turned on.
CAUTION
(cid:129) The climate control seat is a sup- plementary cooling/heating sys- tem.Use the climate control seat when the climate control system is on. Using the climate control seat for prolonged periods of time with the climate control system off could impair the climate con- trol seat performance.
(cid:129) When cleaning the seats, do not use an organic solvent such as paint thinner, benzene, alcohol and gasoline.Doing so may dam- age the surface of the seats.
(cid:129) Do not spill liquid such as water or beverages on the surface of the front seats and seatbacks,or the air vent holes may be blocked and prevented from working properly.
(cid:129) Do not place materials such as plastic bags or newspapers under the seats. The air vent may not work properly as the air intake can be blocked.
(cid:129) When the air vent does not oper- ate,restart the vehicle.If there is no change, have your vehicle inspected by an authorized HYUNDAI dealer.
Safety features of your vehicle
WARNING
Passengers should use extreme caution when using the climate control seat to warm due to the possibility of excess heating or burns. The occupants must be able to feel if the seat is becoming too warm and to turn the seat warmer off. In particular, the driver must exercise extreme care for the fol- lowing types of passengers: 1. Infants, children, elderly or dis- abled persons, or hospital outpa- tients
2. Persons with sensitive skin or
those that burn easily
3. Fatigued individuals 4. Intoxicated individuals 5. Individuals taking medication that can cause drowsiness or sleepiness (sleeping pills, cold tablets, etc.)
3 9
Safety features of your vehicle
OBH038010
C010108AUN-EU Seatback pocket The seatback pocket is provided on the back of the front passenger’s and driver’s seatbacks.
WARNING - Seatback pockets
Do not put heavy or sharp objects in the seatback pockets. In an acci- dent they could come loose from the pocket and injure vehicle occu- pants.
10
WARNING
For proper operation of the occu- pant classification system: (cid:129) Do not place any items cumula- tively weighing over 2.2 lbs (1 kg) in the passenger’s seatback pocket or on the passenger’s seat.
(cid:129) Do not hang onto the front pas-
senger seatback.
OBH038076L
Rear seat C010303ABH Headrest The rear seat is equipped with headrests in all the seating positions for the occu- pant's safety and comfort. The headrest not only provides comfort for passengers, but also helps to protect the head and neck in the event of a colli- sion.
WARNING
(cid:129) For maximum effectiveness in case of an accident, the headrest should be adjusted so the middle of the headrest is at the same height as the center of gravity of an occupant's head. Generally, the center of gravity of most peo- ple's head is similar with the height of the top of their eyes. Also, adjust the headrest as close to your head as possible. The use of a cushion that holds the body away from the seatback is not recommended.
(cid:129) Do not operate the vehicle with the headrests removed as severe injury to an occupant may occur in the event of an accident. Headrests may provide protec- tion against severe neck injuries when properly adjusted.
Safety features of your vehicle
OBH038015
OBH038016
Adjusting the height up and down To raise the headrest, pull it up to the desired position (1). To lower the head- rest, push and hold the release button (2) on the headrest support and lower the headrest to the desired position (3).
Removal To remove the headrest, raise it as far as it can go then press the release button (1) while pulling upward (2).
WARNING
Do not operate the vehicle with the headrests removed as severe injury to the occupants may occur in the event of an accident. Headrests may provide protection against neck injuries when properly adjust- ed.
3 11
Safety features of your vehicle
OBH038078L
OBH038074L
OBH031017N
Reinstall To reinstall the headrest, put the head- rest poles(1) into the holes while press- ing the release button(2). Then adjust it to the appropriate height.
Rear center seats headrest You can fold the rear center seat’s head- rest by pressing the upper part of the headrest while pushing the button (1). To use the headrest, pull up the upper part of the headrest.
WARNING
Make sure the headrest locks in position after adjusting it to proper- ly protects the occupants.
WARNING
Do not operate the vehicle with the headrests folded as severe injury to an occupant may occur in the event of an accident. Headrests may pro- vide protection against severe neck injuries when properly adjusted.
C010304ABH-EU Armrest The armrest is located in the center of the rear seat. Pull the armrest down by using the strap (1) provided on the arm- rest. You will find cup holders on the armrest.
12
Safety features of your vehicle
CAUTION
(cid:129) Make sure the engine is off, the shift lever is in P and the parking brake is applied whenever load- ing or unloading cargo.The vehi- cle may move if the shift lever is inadvertently moved to another position.
(cid:129) Be careful when loading cargo through the rear passenger seats to prevent damage to the vehicle interior.
(cid:129) When cargo is loaded through the rear passenger seats,ensure the cargo is properly secured to pre- vent it from moving while driving. Unsecured cargo in the passen- ger compartment can cause dam- age to the vehicle or injury to it’s occupants.
WARNING - Cargo
Cargo should always be secured to prevent it from being thrown about the vehicle in a collision and caus- ing injury to the vehicle occupants. Do not place objects on the rear seats, since they cannot be proper- ly secured and may hit the front seat occupants in a collision.
WARNING - Cargo loading Make sure the engine is off, the shift lever is in P (Park) and the parking brake is securely applied whenever loading or unloading cargo. Failure to take these steps may allow the vehicle to move if the shift lever is inadvertently moved to another position.
OBH031019N
Carrying long/narrow cargo (if equipped) Pull the armrest down using the strap provided on the armrest. Pull the cover down while pushing the release lever down. Additional cargo space is provided to accommodate long/narrow cargo (skis, poles, lumber, etc.) not able to fit properly in the trunk when closed.
3 13
Safety features of your vehicle
SEAT BELTS C020100AUN Seat belt restraint system
WARNING
(cid:129) For maximum restraint system protection, the seat belts must always be used whenever the car is moving.
(cid:129) Seat belts are most effective the
when seatbacks are upright position.
in
(cid:129) Children age 12 and under must always be properly restrained in the rear seat. Never allow chil- dren to ride in the front passen- ger seat. If a child over 12 must be seated in the front seat, he/she must be properly belted and the seat should be moved as far back as possible.
(cid:129) Never wear the shoulder belt under your arm or behind your back. An improperly positioned shoulder belt can cause serious injuries in a crash. The shoulder belt should be positioned midway over your shoulder across your collarbone.
(Continued)
14
(Continued) (cid:129) Avoid wearing twisted seat belts. A twisted belt can't do its job as well. In a collision, it could even cut into you. Be sure the belt webbing is straight and not twist- ed.
(cid:129) Be careful not to damage the belt webbing or hardware. If the belt webbing or hardware is dam- aged, replace it.
WARNING
Seat belts are designed to bear upon the bony structure of the body, and should be worn low across the front of the pelvis, or the pelvis, chest and shoulders, as applicable; wearing the lap section of the belt across the abdominal area must be avoided. Seat belts should be adjusted as firmly as possible, consistent with comfort, to provide the protection for which they have been designed. A slack belt will greatly reduce the protection afforded to the occu- pant.
(Continued)
(Continued) Care should be taken to avoid con- tamination of the webbing with pol- ishes, oils and chemicals and par- ticularly battery acid. Cleaning may safely be carried out using mild soap and water. The belt should be replaced if webbing becomes frayed, contaminated or damaged. It is essential to replace the entire assembly after it has been worn in a severe impact even if damage to the assembly is not obvious. Belts should not be worn with straps twisted. Each seat belt assembly must only be used by one occu- pant; it is dangerous to put a belt around a child being carried on the occupant's lap.
WARNING
No modifications or additions should be made by the user which will either prevent the seat belt adjusting devices from operating to remove slack, or prevent the seat belt assembly from being adjusted to remove slack.
If the driver's seat belt is not fastened when the ignition switch is turned on, the seat belt warning light and chime will operate for approximately 6 seconds. But if it is fastened within the 6 seconds, the warning light will blink for the 6 seconds and the warning chime will turn off imme- diately. If the driver's seat belt is disconnected after the ignition switch is turned to the ON position, the seat belt warning light will turn on for approximately 6 seconds. But if it is fastened within the 6 seconds, the warning light will turn off immediately. If the driver's seat belt is not fastened when the vehicle speed exceeds 6 mph (10 km/h), the seat belt warning light and chime will operate for approximately 11
times with a pattern of 6 seconds on and 24 seconds off until the belt is fastened or the vehicle speed decreases below 3
mph (5 km/h).1GQA2083
C020101CBH-EU Seat belt warning (for driver’s seat) As a reminder to the driver, the seat belt warning light will blink for approximately 6 seconds each time you turn the ignition switch ON, regardless of belt fastening. The warning light will blink again for approximately 6 seconds when starting the engine.
Safety features of your vehicle
OBH038071N
Seat belt warning (for front passen- ger’s seat) As a reminder to the front passenger, the front passenger's seat belt warning light will blink for approximately 6 seconds each time you turn the ignition switch ON regardless of belt fastening. If the pas- senger's seat belt is unfastened when the vehicle speed exceeds 6 mph (10
km/h), the passenger's seat belt warning light will blink for at least 6 seconds until the belt is fastened.3 15
Safety features of your vehicle
✽✽ NOTICE If you are not able to smoothly pull enough of the safety belt from the retractor, firmly pull the belt out and release it. Then you will be able to pull the belt out smoothly.
Front seat
B180A01NF-1
C020102ABH-EU Seat belt - Driver's 3-point system with emergency locking retractor To fasten your seat belt: To fasten your seat belt, pull it out of the retractor and insert the metal tab (1) into the buckle (2). There will be an audible "click" when the tab locks into the buckle. The seat belt automatically adjusts to the proper length only after the lap belt por- tion is adjusted manually so that it fits snugly around your hips. If you lean for- ward in a slow, easy motion, the belt will extend and let you move around. If there is a sudden stop or impact, however, the belt will lock into position. It will also lock if you try to lean forward too quickly.
16
OBH038022
Height adjustment You can adjust the height of the shoulder belt anchor to one of 4 positions for max- imum comfort and safety. The height of the seat belt should not be too near your neck. The shoulder portion should be adjusted so that it lies across your chest and midway over your shoul- der nearest the door and not your neck. To adjust the height of the seat belt anchor, lower or raise the height adjuster into an appropriate position.
To raise the height adjuster, pull it up (1). To lower it, push it down (3) while press- ing the height adjuster button (2). Release the button to lock the anchor into position. Try sliding the height adjuster to make sure that it has locked into position.
WARNING
(cid:129) Verify the shoulder belt anchor is locked into position at the appro- priate height. Never position the shoulder belt across your neck or face. Improperly positioned seat belts can cause serious injuries in an accident.
(cid:129) Failure to replace seat belts after an accident could leave you with damaged seat belts that will not provide protection in the event of another collision leading to per- sonal injury or death. Replace your seat belts after being in an accident as soon as possible.
B200A02NF
WARNING
You should place the lap belt por- tion as low as possible and snugly across your hips, not on your waist. If the lap belt is located too high on your waist, it may increase the chance of injury in the event of a collision. Both arms should not be under or over the belt. Rather, one should be over and the other under, as shown in the illustration. Never wear the seat belt under the arm nearest the door.
Safety features of your vehicle
C020106ABH Seat belts - Front passenger and rear seat 3-point system with combination locking retractor To fasten your seat belt: Combination retractor type seat belts are installed in the rear seat positions to help accommodate the installation of child restraint systems. Although a combina- tion retractor is also installed in the front passenger seat position, it is strongly recommended that children always be seated in the rear seat. NEVER place any infant restraint system in the front seat of the vehicle. This type of seat belt combines the fea- tures of both an emergency locking retractor seat belt and an automatic lock- ing retractor seat belt. To fasten your seat belt, pull it out of the retractor and insert the metal tab into the buckle. There will be an audible "click" when the tab locks into the buckle. When not securing a child restraint, the seat belt operates in the same way as the driver's seat belt (Emergency Locking Retractor Type). It automatically adjusts to the proper length only after the lap belt portion of the seat belt is adjusted manually so that it fits snugly around your hips.
3 17
Safety features of your vehicle
When the seat belt is fully extended from the retractor to allow the installation of a child restraint system, the seat belt oper- ation changes to allow the belt to retract, but not to extend (Automatic Locking Retractor Type). Refer to “Using a child restraint system” in this section.
✽✽ NOTICE Although the combination retractor provides the same level of protection for seated passengers in either emergency or automatic locking modes, it is recom- mended that seated passengers use the emergency locking feature for improved convenience. The automatic locking function is intended to facilitate child restraint installation. To convert from the automatic locking feature to the emergency locking operation mode, allow the unbuckled seat belt to fully retract.
18
OBH039023N When using the rear center seat belt, the buckle with the “CENTER” mark must be used.
B210A01NF-1
To release the seat belt: The seat belt is released by pressing the release button (1) in the locking buckle. When it is released, the belt should auto- matically draw back into the retractor. If this does not happen, check the belt to be sure it is not twisted, then try again.
When the vehicle stops suddenly, or if the occupant tries to lean forward too quickly, the seat belt retractor will lock into position. In certain frontal collisions, the pre-tensioner will activate and pull the seat belt into tighter contact against the occupant's body. If the system senses excessive tension on the driver or passenger's seat belt when the pre-tensioner activates, the load limiter inside the pre-tensioner will release some of the pressure on the affected seat belt.
WARNING
Do not put anything near the buck- le. Placing objects near the buckle can adversely affect the anchor pre-tensioner and may increase the risk of personal injury in the event of a collision.
OED030300
C020200BBH-EU Pre-tensioner seat belt Your vehicle is equipped with driver's and front passenger's pre-tensioner seat belts. The purpose of the pre-tensioner is to make sure that the seat belts fit tightly against the occupant's body in certain frontal collisions. The pre-tensioner seat belts may be activated in crashes where the frontal collision is severe enough.
Safety features of your vehicle
OBH038100
OBH030101
The seat belt pre-tensioner system con- sists mainly of the following components. Their locations are shown in the illustra- tion: 1.SRS air bag warning light 2.Retractor pre-tensioner assembly 3.SRS control module 4.Anchor pre-tensioner assembly(driver side)
3 19
Safety features of your vehicle
WARNING
To obtain maximum benefit from a pre-tensioner seat belt: 1. The seat belt must be worn cor- rectly and adjusted to the proper position. Please read and follow all of the important information and precautions about your vehi- cle’s occupant safety features – including seat belts and air bags – that are provided in this manu- al.
2. Be sure you and your passen- gers always wear seat belts prop- erly.
20
✽✽ NOTICE • The driver's and front passenger's pre-tensioner seat belts may be acti- vated in certain frontal collisions. The pre-tensioner seat belts can be activated where the frontal collision is severe enough, together with the air bags.
• When the pre-tensioner seat belts are activated, a loud noise may be heard and fine dust, which may appear to be smoke, may be visible in the passenger compartment. These are normal oper- ating conditions and are not haz- ardous.
• Although it is harmless, the fine dust may cause skin irritation and should not be breathed for prolonged peri- ods. Wash all exposed skin areas thor- oughly after an accident in which the pre-tensioner seat belts were activat- ed.
✽✽ NOTICE The sensor that activates the SRS air bag is connected with the pre-tensioner seat belt, and the SRS air bag warning light on the instrument panel will illuminate for approximately 6 seconds after the ignition switch has been turned to the ON position, and then it should turn off.
CAUTION
If the pre-tensioner seat belt is not working properly,this warning light will illuminate even if there is no malfunction of the SRS air bag. If the SRS air bag warning light does not illuminate when the ignition switch is turned ON,or if it remains illuminated after illuminating for approximately 6 seconds, or if it illuminates while the vehicle is being driven, have an authorized HYUNDAI dealer inspect the pre- tensioner seat belt and SRS air bag system as soon as possible.
(Continued) (cid:129) Improper handling of the pre-ten- sioner seat belt assemblies, and failure to heed the warnings not to strike, modify, inspect, replace, service or repair the pre-tension- er seat belt assemblies may lead to improper operation or inadver- tent activation and serious injury. (cid:129) Always wear the seat belts when driving or riding in a motor vehi- cle.
(cid:129) If the vehicle or pre-tensioner seat belt must be discarded, con- tact an authorized HYUNDAI deal- er.
WARNING
(cid:129) Pre-tensioners are designed to operate only one time. After acti- vation, pre-tensioner seat belts must be replaced. All seat belts, of any type, should always be replaced after they have been worn during a collision.
(cid:129) The pre-tensioner seat belt assembly mechanisms become hot during activation. Do not touch the pre-tensioner seat belt assemblies for several minutes after they have been activated.
(cid:129) Do not attempt to inspect or replace the pre-tensioner seat belts yourself. This must be done by an authorized HYUNDAI dealer. (cid:129) Do not strike the pre-tensioner
seat belt assemblies.
(cid:129) Do not attempt to service or repair the pre-tensioner seat belt system in any manner.
(Continued)
Safety features of your vehicle
C020300AUN-EU Seat belt precautions
WARNING
All occupants of the vehicle must wear their seat belts at all times. Seat belts and child restraints reduce the risk of serious or fatal injuries for all occupants in the event of a collision or sudden stop. Without a seat belt, occupants could be shifted too close to a deploying air bag, strike the interior structure or be thrown from the vehicle. Properly worn seat belts greatly reduce these hazards. Even with advanced air bags, unbelted occupants can be severe- ly injured by a deploying air bag. Always the precautions about seat belts, air bags and occu- pant safety contained in this manu- al.
follow
3 21
Safety features of your vehicle
C020306AUN-EU Infant or small child All 50 states have child restraint laws.You should be aware of the specific require- ments in your state. Child and/or infant seats must be properly placed and installed in the rear seat. For more infor- mation about the use of these restraints, refer to “Child restraint system” in this section.
WARNING
Every person in your vehicle needs to be properly restrained at all times, including infants and chil- dren. Never hold a child in your arms or lap when riding in a vehi- cle. The violent forces created dur- ing a crash will tear the child from your arms and throw the child against the interior. Always use a child restraint appropriate for your child's height and weight.
✽✽ NOTICE Small children are best protected from injury in an accident when properly restrained in the rear seat by a child restraint system that meets the require- ments of the Federal Motor Vehicle Safety Standards. Before buying any child restraint system, make sure that it has a label certifying that it meets Federal Motor Vehicle Safety Standard 213. The restraint must be appropriate for your child's height and weight. Check the label on the child restraint for this information. Refer to “Child restraint system” in this section.
C020301AUN Larger children Children who are too large for child restraint systems should always occupy the rear seat and use the available lap/shoulder belts. The lap portion should be fastened snug on the hips and as low as possible. Check belt fit periodically. A child's squirming could put the belt out of position. Children are afforded the most safety in the event of an accident when they are restrained by a proper restraint system in the rear seat. If a larger child (over age 12) must be seated in the front seat, the child should be securely restrained by the available lap/shoulder belt and the seat should be placed in the rearmost position. Children age 12 and under should be restrained securely in the rear seat. NEVER place a child age 12 and under in the front seat. NEVER place a rear facing child seat in the front seat of a vehicle.
22
Safety features of your vehicle
If the shoulder belt portion slightly touch- es the child’s neck or face, try placing the child closer to the center of the vehicle. If the shoulder belt still touches their face or neck they need to be returned to a child restraint system.
WARNING - Shoulder belts on small children
(cid:129) Never allow a shoulder belt to be in contact with a child’s neck or face while the vehicle in motion.
is
(cid:129) If seat belts are not properly worn and adjusted on children, there is a risk of death or serious injury.
C020302AKM Restraint of pregnant women Pregnant women should wear lap/shoul- der belt assemblies whenever possible according to specific recommendations by their doctors. The lap portion of the belt should be worn AS SNUGLY AND LOW AS POSSIBLE on the hips, not cross the abdomen.
WARNING - Pregnant
women
Pregnant women must never place the lap portion of the safety belt over the area of the abdomen where the fetus is located or above the abdomen where the belt could crush the fetus during an impact.
C020304AUN One person per belt Two people (including children) should never attempt to use a single seat belt. This could increase the severity of injuries in case of an accident.
C020305ABH Do not lie down To reduce the chance of injuries in the event of an accident and to achieve max- imum effectiveness of the restraint sys- tem, all passengers should be sitting up and the front and rear seats should be in an upright position when the car is mov- ing. A seat belt cannot provide proper protection if the person is lying down in the rear seat or if the front and rear seats are in a reclined position.
C020303AUN Injured person A seat belt should be used when an injured person is being transported. When this is necessary, you should con- sult a physician for recommendations.
3 23
C020403AEN When to replace seat belts Entire in-use seat belt assembly or assemblies should be replaced if the vehicle has been involved in an accident. This should be done even if no damage is visible. Additional questions concern- ing seat belt operation should be directed to an authorized HYUNDAI dealer.
Safety features of your vehicle
WARNING
Riding with a reclined seatback increases your chance of serious or fatal injuries in the event of a col- lision or sudden stop. The protec- tion of your restraint system (seat belts and air bags) is greatly reduced by reclining your seat. Seat belts must be snug against your hips and chest to work proper- ly. The more the seatback is reclined, the greater the chance that an occupant's hips will slide under the lap belt causing serious internal injuries or the occupant's neck could strike the shoulder belt. Drivers and passengers should always sit well back in their seats, properly belted, and with the seat- backs upright.
C020400ABH Care of seat belts Seat belt systems should never be disas- sembled or modified. In addition, care should be taken to assure that seat belts and belt hardware are not damaged by seat hinges, doors or other abuse.
C020401AEN Periodic inspection All seat belts should be inspected peri- odically for wear or damage of any kind. Any damaged parts should be replaced as soon as possible.
C020402AUN Keep belts clean and dry Seat belts should be kept clean and dry. If belts become dirty, they can be cleaned by using a mild soap solution and warm water. Bleach, dye, strong detergents or abrasives should not be used because they may damage and weaken the fabric.
24
CHILD RESTRAINT SYSTEM C030000AEN-EU Children riding in the car should sit in the rear seat and must always be properly restrained to minimize the risk of injury in an accident, sudden stop or sudden maneuver. According to accident statis- tics, children are safer when properly restrained in the rear seats than in the front seat. Larger children not in a child restraint should use one of the seat belts provided. You should be aware of the specific requirements in your state. Child and/or infant safety seats must be properly placed and installed in the rear seat. You must use a commercially available child restraint system that meets the require- ments of the Federal Motor Vehicle Safety Standards (FMVSS). Child restraint systems are designed to be secured in vehicle seats by lap belts or the lap belt portion of a lap/shoulder belt, or by a LATCH system. Children could be injured or killed in a crash if their restraints are not properly secured. For small children and babies, a child seat or infant seat must be used. Before buying a particular child restraint system, make sure it fits your car seat and seat belts, and fits your child. Follow all the instructions provided by the man- ufacturer when the child restraint system.
installing
WARNING
(cid:129) A child restraint system must be placed in the rear seat. Never install a child or infant seat on the front passenger's seat. Should an accident occur and cause the passenger-side air bag to deploy, it could severely injure or kill an infant or child seated in an infant or child seat. Thus only use a child restraint in the rear seat of your vehicle.
(cid:129) A seat belt or child restraint sys- tem can become very hot if it is left in a closed vehicle on a sunny day, even if the outside tempera- ture does not feel hot. Be sure to check the seat cover and buckles before placing a child there.
(cid:129) When the child restraint system is not in use, store it in the lug- gage area or fasten it with a seat belt so that it will not be thrown forward in the case of a sudden stop or an accident.
(cid:129) Children may be seriously injured or killed by an inflating air bag. All children, even those too large for child restraints, must ride in the rear seat.
Safety features of your vehicle
WARNING
To reduce the chance of serious or fatal injuries: (cid:129) Children of all ages are safer when restrained in the rear seat. A child riding in the front passen- ger seat can be forcefully struck by an inflating air bag resulting in serious or fatal injuries.
(cid:129) Always follow the child restraint system manufacturer’s instruc- tions for installation and use of the child restraint.
(cid:129) Always make sure the child seat is secured properly in the car and your child is securely restrained in the child seat.
(cid:129) Never hold a child in your arms or lap when riding in a vehicle. The violent forces created during a crash will tear the child from your arms and throw the child against the car’s interior.
(cid:129) Never put a seat belt over your- self and a child. During a crash, the belt could press deep into the child causing serious internal injuries.
(Continued)
3 25
Safety features of your vehicle
resulting
(Continued) (cid:129) Never leave children unattended in a vehicle – not even for a short time. The car can heat up very quickly, in serious injuries to children inside. Even very young children may inadver- tently cause the vehicle to move, entangle themselves in the win- dows, or lock themselves or oth- ers inside the vehicle.
(cid:129) Never allow two children, or any two persons, to use the same seat belt.
(cid:129) Children often squirm and repo- improperly. sition themselves Never let a child ride with the shoulder belt under their arm or behind their back. Always proper- ly position and secure children in the rear seat.
(cid:129) Never allow a child to stand-up or kneel on the seat or floor of a moving vehicle. During a colli- sion or sudden stop, the child can be violently thrown against the vehicle’s interior, resulting in serious injury.
(Continued)
26
(Continued) (cid:129) Never use an infant carrier or a child safety seat that "hooks" over a seatback, it may not pro- vide adequate security in an acci- dent.
(cid:129) Seat belts can become very hot, especially when the car is parked in direct sunlight. Always check seat belt buckles before fasten- ing them over a child.
Rearward-facing child restraint system
Forward-facing child restraint system
CRS09
OBH038024
C030100AEN-EU Using a child restraint system For small children and babies, the use of a child seat or infant seat is required. This child seat or infant seat should be of appropriate size for the child and should be installed in accordance with the man- ufacturer's instructions.
For safety reasons, we recommend that the child restraint system be used in the rear seats.
WARNING
Never place a rear-facing child restraint in the front passenger seat, because of the danger that an inflating passenger-side air bag could impact the rear-facing child restraint and kill the child.
Since all passenger seat belts move freely under normal conditions and only lock under extreme or emergency condi- tions (emergency locking mode), you must manually change these seat belts to the automatic locking mode to secure a child restraint.
WARNING - Child seat installation
(cid:129) A child can be seriously injured or killed in a collision if the child restraint is not properly anchored to the car and the child is not properly restrained in the child restraint. Before installing the child restraint system, read the instructions supplied by the child restraint system manufacturer.
(cid:129) If the seat belt does not operate as described in this section, have the system checked immediately by your authorized HYUNDAI dealer.
(cid:129) Failure to observe this manual's regarding child instructions restraint systems and the instructions provided with the child restraint system could increase the chance and/or severity of injury in an accident.
Safety features of your vehicle
E2MS103005
C030102BUN-EU Placing a passenger seat belt into the automatic locking mode The automatic locking mode will help prevent the normal movement of the child in the vehicle from causing the seat belt to loosen and compromise the child restraint system. To secure a child restraint system, use the following proce- dure.
3 27
Safety features of your vehicle
OEN036101
To install a child restraint system on the outboard or center rear seats, do the fol- lowing: 1. Place the child restraint system on the seat and route the lap/shoulder belt around or through the restraint, follow- ing restraint manufacturer’s instructions. Be sure the seat belt web- bing is not twisted.the
2. Fasten the lap/shoulder belt latch into the buckle. Listen for the distinct “click” sound.
Position the release button so that it is easy to access in case of an emergency.
28
OBH039102
3. Pull the shoulder portion of the seat belt all the way out. When the shoulder portion of the seat belt is fully extend- ed, it will shift the retractor to the “Automatic Locking” (child restraint) mode.OBH039103
4. Slowly allow the shoulder portion of the seat belt to retract and listen for an audible “clicking” or “ratcheting” sound. This indicates that the retractor is in the “Automatic Locking” mode. If no distinct sound is heard, repeat steps 3
and 4.Safety features of your vehicle
OBH038072N
C030103ABH-EU Securing a child restraint seat with “Tether Anchor”system Child restraint hook holders are located on the package tray.
WARNING - Automatic
locking mode
The lap/shoulder belt automatically returns to the “emergency locking mode” whenever the belt is allowed to retract fully. Therefore, the pre- ceding seven steps must be fol- lowed each time a child restraint is installed. If the retractor in the Automatic Locking mode, the child restraint can move when your vehi- cle turns or stops suddenly. A child can be seriously injured or killed if the child restraint is not properly anchored to the car, including set- ting the retractor to the Automatic Locking mode.
is not
When the seat belt is allowed to retract to its fully stowed position, the retractor will automatically switch from the “Automatic Locking” mode to the emergency lock mode for normal adult usage.
3 29
OEN036104
5. Remove as much slack from the belt as possible by pushing down on the child restraint system while feeding the shoulder belt back into the retractor.6. Push and pull on the child restraint system to confirm that the seat belt is holding it firmly in place. If it is not, release the seat belt and repeat steps 2 through 6.
7. Double check that the retractor is in the “Automatic Locking” mode by attempt- ing to pull more of the seat belt out of the retractor. If you cannot, the retractor is in the “Automatic Locking” mode.
To remove the child restraint, press the release button on the buckle and then pull the lap/shoulder belt out of the restraint and allow the seat belt to retract fully.
WARNING
When using the vehicle's "Tether Anchor" system to install a child restraint system in the rear seat, all unused vehicle rear seat belt metal latch plates or tabs must be latched securely in their seat belt buckles and the seat belt webbing must be retracted behind the child restraint to prevent the child from reaching and taking hold of unretracted seat belts. Unlatched metal latch plates or tabs may allow the child to reach the unretracted seat belts which may result in strangulation and a serious injury or death to the child in the child restraint.
Safety features of your vehicle
OBH030105
1. Route the child restraint seat tetherstrap over the seatback. For vehicles with adjustable head- rests, route the tether strap under the headrest and between the headrest posts, otherwise route the tether strap over the top of the seatback.
2. Connect the tether strap hook to the appropriate child restraint hook holder and tighten to secure the child restraint seat.
30
WARNING - Tether strap
(cid:129) A child can be seriously injured or killed in a collision if the child restraint properly anchored. Always follow the child seat manufacturer’s instructions for installation and use.
not
is
(cid:129) Never mount more than one child restraint to a single tether anchor or to a single lower anchorage point. The increased load caused by multiple seats may cause the tethers or
