2010 Honda Odyssey Owners Manual

whenever you turn the ignition switch to the ACCESSORY (I) position.

154

2010 Odyssey０９／０４／１０　１６：２０：０１　３１ＳＨＪ６５０　０１６０　

ToturnofftheAutoDoorUnlock modes:

3.

Push and hold the rear of the master door lock switch on the driver’s door. You will hear a click, and after about 5 seconds, you will hear another click.

4.

Release the switch, and within 5
seconds, turn the ignition switch to the LOCK (0) position.

1.

Make sure the shift lever is in the Park (P) position.

2.

Turn the ignition switch to the ON (II) position, and open the driver’s door.

Door Locks

ToprogramtheParkUnlockmode: Unlocksthedriver’sdoororalldoors andtailgatewhentheshiftleveris movedintothePark(P)position.

1.

Make sure the shift lever is in the Park (P) position.

2.

Turn the ignition switch to the ON (II) position, and make sure to close the driver’s door.

CONTINUED

155

2010 Odyssey０９／０４／１０　１６：２０：１２　３１ＳＨＪ６５０　０１６１　

Door Locks

3.

Push and hold the rear of the master door lock switch on the driver’s door. You will hear a click. Continue to hold down the switch:

Until you hear another click (after about 5 seconds) to activate driver’sdoorunlock feature.

Or, until you hear two more clicks (after about 10 seconds) to activate alldoorsandtailgate unlockfeature

4.

Release the switch, and within 5
seconds, turn the ignition switch to the LOCK (0) position.

156

ToprogramtheIgnitionSwitch Unlockmode: Unlocksthedriver’sdoororalldoors andtailgatewhentheignitionswitchis movedoutoftheON(II)position.

1.

Make sure the shift lever is in the Park (P) position.

2.

Turn the ignition switch to the ON (II) position, and make sure to close the driver’s door.

3.

Push and hold the brake pedal, and move the shift lever out of P.

4.

Push and hold the rear of the master door lock switch on the driver’s door. You will hear a click. Continue to hold the switch:

Until you hear another click (after about 5 seconds) to activate the driver’s door unlock feature.

Or, until you hear two more clicks (after about 10 seconds) to activate all doors and tailgate unlock feature.

5.

Release the switch and, within 5
seconds, turn the ignition switch to the ACCESSORY (I) position. Move the shift lever to the Park (P) position.

6.

Turn the ignition switch to the LOCK (0) position.

2010 Odyssey０９／０４／１０　１６：２０：１９　３１ＳＨＪ６５０　０１６２　

Childproof Door Locks

OnEX,EX-LandTouringmodels With the childproof door locks on, automatic operation with the inside door handle is disabled.

Tailgate

Door Locks, Tailgate

The childproof door locks are designed to prevent children seated in the rear from accidentally opening the rear sliding doors. Each door has a lock lever near the edge. With the lever in the LOCK position, the door cannot be opened from the inside regardless of the position of the lock tab. To open the door, pull the lock tab up and use the outside door handle.

To open the tailgate, pull the handle, then lift up. To close the tailgate, use the inner handle to pull it down, then press down on the back edge.

Keep the tailgate closed at all times while driving to avoid damaging the tailgate and to prevent exhaust gas from getting into the interior. See Carbon Monoxide Hazard 60

on page

157

2010 Odyssey０９／０４／１０　１６：２０：２６　３１ＳＨＪ６５０　０１６３　

Tailgate

Power Tailgate

POWER TAILGATE SWITCH

TAILGATE BUTTON

OnEX-LandTouringmodels The tailgate can be opened and closed with the remote transmitter or the switch on the dashboard when both front doors are unlocked.

158

Press and hold the tailgate button on the remote transmitter or the dashboard switch for about 1 second to open or close the tailgate. Each time you press the button on the remote transmitter or the dashboard switch, you will hear a beep, and some front and rear lights will flash.

If you push the same button or switch again while the tailgate is opening or closing, you will hear three beeps, and the tailgate will stop moving, reverse direction, and stop at the fully opened or closed position.

TAILGATE SWITCH

The tailgate can also be closed by pressing the button on the tailgate. If you press the button again while the tailgate is closing, you will hear three beeps, and the tailgate will stop moving, reverse direction, and stop at the fully opened position.

To open or close the tailgate manually, see page

160

2010 Odyssey０９／０４／１０　１６：２０：３５　３１ＳＨＪ６５０　０１６４　

Auto-Reverse The power tailgate has an auto- reverse feature. If it meets resistance while opening or closing, it will beep three times and reverse direction. However, the tailgate may not reverse immediately. Always make sure passengers and objects are clear of the tailgate before opening or closing it.

Closing a power tailgate while anyone is in the path of the tailgate can cause serious injury.

Make sure everyone is clear before closing the power tailgate.

Also check that passengers, especially children, do not have their hands on the edge of the tailgate or on the tailgate sill. The auto reverse feature stops working when the tailgate is about to latch so the motor can pull the tailgate shut.

If your vehicle’s battery is disconnected, goes dead, or the fuse is removed while the tailgate is fully open, the power tailgate needs to be reset. After connecting the battery or installing the fuse, close the tailgate fully by hand.

The power tailgate may not open or close under the these conditions:

The vehicle is parked on a steep hill.

When the vehicle is swayed in a strong wind.

Tailgate

When the tailgate or the roof is covered with snow or ice.

Do not install any accessories on the tailgate. It may cause the tailgate to malfunction. If there is snow or ice on the tailgate, make sure to remove it before you operate the tailgate.

If you pull the tailgate release handle while the tailgate is opening or closing, it will stop moving. You need to open or close it the rest of the way manually.

The tailgate has sensors on both sides. Be careful not to damage them. If the sensors are damaged, the power tailgate does not function properly.

CONTINUED

159

2010 Odyssey０９／０４／１０　１６：２０：４３　３１ＳＨＪ６５０　０１６５　

Tailgate

If you try to drive off with the tailgate open, a beeper sounds and a ‘‘DOOR & TAILGATE OPEN’’ message is shown on the multi- information display.

Unlocking the Tailgate

Keep the tailgate closed at all times while driving to avoid damaging the tailgate and to prevent exhaust gas from getting into the interior. See Carbon Monoxide Hazard 60

on page

If there is a problem in the power tailgate system, you will see a ‘‘CHECK POWER TAILGATE’’ message on the multi-information display. Have the system checked by your dealer.

With this message shown on the multi-information display, you can still open or close the tailgate manually.

160

COVER

LEVER

If the power door lock system cannot unlock the tailgate, unlock it manually.

OnEX-LandTouringmodels Push the release lever to the right as shown.

Use a small flat-tip screwdriver to remove the cover on the back of the tailgate.

If you need to unlock the tailgate manually, it means there is a problem with the tailgate. Have the vehicle checked by your dealer.

2010 Odyssey０９／０４／１０　１６：２０：５２　３１ＳＨＪ６５０　０１６６　

Opening and Closing Manual Sliding Doors OnLXandCanadianDXmodels To open, pull the inside or outside door handle, and slide the door back. It will latch in the fully open position. When opening from the inside, the childproof door lock must be unlocked.

To close, pull either handle, and slide the door closed. Make sure the door is closed and latched securely before driving, and all passengers are clear of the sliding doors before closing them.

When opening a sliding door, it stops about halfway if the window is open more than 3 in (8 cm). If the vehicle is facing downhill, the sliding door will slam shut when you release the door handle. Always close the window fully before opening the sliding door.

Tailgate, Sliding Doors

Power Sliding Doors OnEX,EX-LandTouringmodels The doors are electrically powered and can be operated with the remote transmitter, the door handles, or the dashboard switches. To operate the doors:

The shift lever must be in Park or neutral. To operate the doors with the shift lever in neutral, the ignition switch must be in the ON (II) position with the brake pedal pressed or the parking brake applied.

The MAIN switch must be in the ON position.

The doors must be unlocked.

CONTINUED

161

Lock

Unlock

OnLX,EXandCanadianDXmodels Use the key to unlock the tailgate as shown, then pull the outer handle to open the tailgate.

If you need to unlock the tailgate manually, it means there is a problem with the tailgate. Have the vehicle checked by your dealer.

2010 Odyssey０９／０４／１０　１６：２１：０２　３１ＳＨＪ６５０　０１６７　

Sliding Doors

WhentheshiftleverisinPark: If you shift out of Park while a door is closing, you will hear a beep until the door closes.

When you shift out of Park while a door is opening, you will hear a continuous tone and the door will stop moving if you release the brake pedal or the parking brake. Stop the vehicle and close the door.

Whentheshiftleverisinneutraland theignitionswitchisintheON(II) position: If you shift out of neutral or release the brake pedal or the parking brake while a door is closing, you will hear a beep until the door closes.

If you shift out of neutral or release the brake pedal or the parking brake while a door is opening, you will hear a continuous tone and the door will stop moving. Stop the vehicle and close the door.

162

DoorHandles To open the door with the inside door handle, pull the handle backward. Push it forward to close the door. If you pull backward or push forward on the door handle while a door is opening or closing, the door stops moving. Pull backward or push forward to open or close the door fully.

To open or close the door with the outside door handle, pull the door handle. If you pull the door handle while a door is opening or closing, the door stops moving. If you pull the door handle again, the door will open fully.

DashboardSwitches

MAIN SWITCH

POWER SLIDING DOOR SWITCHES

The dashboard switches to the left of the steering column allow you to open or close the power sliding doors.

The MAIN switch on the dashboard controls power to the sliding doors.

2010 Odyssey０９／０４／１０　１６：２１：１２　３１ＳＨＪ６５０　０１６８　

To open a power sliding door, push and release the bottom of the appropriate switch. If you forget to unlock the door, you will hear three beeps. Unlock the door, and try again.

To close a sliding door, push and release the top of the switch.

To stop a door, push either the top or bottom of the switch. The door will stop and you will hear three beeps. Push the switch again to resume movement.

When the MAIN switch is in the OFF position, you have to operate the doors manually.

RemoteTransmitter

DRIVER’S SIDE SLIDING DOOR BUTTON

LED

PASSENGER’S SIDE SLIDING DOOR BUTTON

To open and close a power sliding door, press and hold the appropriate button for at least 1 second. If you forget to unlock the door, you will hear three beeps. Unlock the door, and try again. To stop movement, push the appropriate door button; you will hear three beeps. Push and hold the same button again for at least 1
second and the door will reverse direction.

Sliding Doors

Auto-Reverse Each power sliding door has an auto- reverse feature. If a door meets resistance while closing, it will beep three times and reverse direction. However, the door may not reverse immediately and may cause some bruising or discomfort. Always make sure passengers and objects are clear of the doors before closing them.

If a rear window is open more than 3 in (8 cm), the power sliding door is designed to stop about halfway to avoid accidents. If this happens, close the door with the door handles, the dashboard switch, or the remote transmitter. Close the window and open the sliding door. Make sure the window is fully closed before you operate the power sliding door.

CONTINUED

163

2010 Odyssey０９／０４／１０　１６：２１：２０　３１ＳＨＪ６５０　０１６９　

Sliding Doors

ManuallyOpening/Closingthe PowerSlidingDoor You can manually open or close the sliding doors. The MAIN switch must be in the OFF position. To open a door, pull the inside or outside door handle, and slide the door back. It will latch in the fully open position. To close, pull either handle and slide the door forward. When the door is almost closed, the auto-closer will pull the door shut.

Important Sliding Door Precautions OnEX,EX-LandTouringmodels Before operating the sliding doors, check that passengers, especially children, do not have their hands on the edge of the sliding door or on the door pillar. The auto-reverse motor stops working when the door is about to latch so the auto-closer can pull the door shut.

164

Do not put any item in the door pocket that sticks out from the pocket. It can prevent the doors from opening or closing properly, and damage the vehicle body.

Closing a sliding door while any part of a passenger is in the door’s path can cause serious injury.

Make sure all passengers are clear of the doorway before closing a sliding door.

If there is an obstacle in the door sill, the power sliding door may not open or close properly. When removing the obstacle from the door sill, make sure to turn off the main switch on the dashboard.

When replacing a flat tire, make sure to turn off the power sliding door main switch on the dashboard.

Onallmodels Do not allow anyone to step on the lower arm of the sliding door while the door is open. This could damage the sliding door mechanism.

When you drive with children in your vehicle, use the childproof door locks (see page ). This will prevent children from opening the doors accidentally.

157

2010 Odyssey０９／０４／１０　１６：２１：２９　３１ＳＨＪ６５０　０１７０　

Sliding Doors

Parking on a Hill When parking facing downhill, make sure the doors are latched in the fully open position, and then hold the door open for your passengers. Do not pull the inside or outside door handle, or the door will slam shut.

If you leave the vehicle on a steep downhill with a power sliding door half open and the engine off, the magnetic lock will turn off after 30
minutes and the sliding door will automatically open or close. In this case you will hear a continuous tone.

OnEX,EX-LandTouringmodels Make sure the main switch on the dashboard is in the ON position.

When parking facing downhill on a steep grade, the power sliding doors may not open or close as they do normally.

If your vehicle is facing downhill, do not turn the main switch to OFF while the door is opening because the door may slam shut.

Refueling When you release the fuel fill door, the driver’s side sliding door automatically locks so it cannot open and interfere with the fuel door. If a passenger attempts to unlock the door by cycling the lock knob several times, the door can be opened.

If a passenger needs to get out while you are refueling, instruct that person to exit on the passenger’s side.

When you close the fuel fill door, the driver’s side sliding door unlocks if it was unlocked when you opened the fuel fill door.

OnEX,EX-LandTouringmodels If you open the fuel fill door while the driver’s side sliding door is opening, the sliding door stops. If this happens, the door must be operated manually.

165

2010 Odyssey０９／０４／１０　１６：２１：３６　３１ＳＨＪ６５０　０１７１　

Sliding Doors

Pinch Sensor

Power Sliding Door Indicator

PINCH SENSOR

POWER SLIDING DOOR INDICATOR

OnTouringmodels If there is a problem in the power sliding door system, you will see a ‘‘CHECK LEFT SLIDING DOOR’’ or ‘‘CHECK RIGHT SLIDING DOOR’’ message on the multi-information display (see page message stays on, turn the MAIN switch to OFF, and have the system inspected by your dealer.

). If this

89

OnEX,EX-LandTouringmodels Each sliding door has a pinch sensor on the front edge. Do not damage this sensor, or the power sliding door may not operate properly.

U.S. model is shown

OnEXandEX-Lmodels If the power sliding door indicator comes on and stays on, there is a problem in the system. Turn the MAIN switch to OFF, and have the system inspected by a dealer.

If the battery is disconnected or goes dead, close the sliding door completely by hand. If it still does not operate properly after the battery is reconnected, have your vehicle checked by a dealer.

166

2010 Odyssey０９／０４／１０　１６：２１：４１　３１ＳＨＪ６５０　０１７２　

Passenger Seating ConvertibleSecondRowBucket Seats There are bucket seats with armrests for two front passengers, bucket seats with armrests for two passengers in the second row, and a bench seat for three passengers in the third row.

For greater cargo capacity, the seats in the second row can be removed, and the bench seat in the third row can be folded into the floor.

ExceptU.S.LXandCanadianDX models Your vehicle has a second row plus- one seat that can be installed between the second row bucket seats when needed. The plus-one seat can also be used as a second row center console.

Seats

167

2010 Odyssey０９／０４／１０　１６：２１：５０　３１ＳＨＪ６５０　０１７３　

Seats

−

12

Seat Adjustments Seepages forimportantsafety informationandwarningsabouthowto properlypositiontheseatsandseat- backs.

13

Manual Seat Adjustments

The EX-L and Touring models have a power adjustable driver’s seat and front passenger’s seat. The EX model has a power adjustable driver’s seat and manual front passenger’s seat. LX and DX models have manual driver’s seat and front passenger’s seat adjustments.

The seats in the second and third rows adjust manually.

Make all seat adjustments before you start driving.

168

To adjust the seat forward and backward, pull up on the bar under the seat cushion’s front edge. Move the seat to the desired position, and release the bar. Try to move the seat to make sure it is locked in position.

To adjust the bucket seats in the second row, pull up the bar on the front of the seat bottom. The third row seats do not adjust forward and backward.

To change the seat-back angle of the front seat, pull up the lever on the outside of the seat bottom.

To change the seat-back angle of the bucket seats in the second row, pull forward on the lever on the outside of the seat-back.

2010 Odyssey０９／０４／１０　１６：２１：５９　３１ＳＨＪ６５０　０１７４　

ADJUSTMENT STRAPS

Driver’s Seat Manual Height Adjustment

Seats

Power Seat Adjustments OnEX,EX-LandTouringmodels Seepages forimportantsafety informationandwarningsabouthowto properlypositiontheseatsandseat- backs.

12 13

−

The left and right halves of the third seat-back can be adjusted separately. To adjust the angle, pull the adjustment strap on the outside of each seat-back, move the seat-back to the desired position, and release the adjustment strap. Let the seat- back latch in the new position.

OnLXandCanadianDXmodels The height of your driver’s seat is adjustable. Pull up the lever on the outside of the seat cushion to raise the seat bottom or push the lever down to lower the seat cushion.

Make all adjustments before you start driving.

The controls for the adjustable driver’s power seat are on the outside edge of the seat bottom. You can adjust the power seat with the ignition switch in any position. Make all seat adjustments before you start driving.

OnEX-LandTouringmodels The passenger’s seat has two switches. One moves the seat forward and backward, and the other adjusts the seat-back angle.

CONTINUED

169

2010 Odyssey０９／０４／１０　１６：２２：０８　３１ＳＨＪ６５０　０１７５　

Raises or lowers the seat. (Driver’s seat only)

Moves the whole seat up and forward, or down and backward. The front of the seat also tilts up or down at the same time. (Driver’s seat only)

Adjusts the seat- back angle forward or backward.

Driver’s Lumbar Support

OnEX,EX-LandTouringmodels To change the lumbar support, move the lever on the right side of the seat-back forward or backward. Keep moving the lever forward or backward until you find a suitable position.

Moves the seat forward and backward.

Moves the front of the seat up or down. (Driver’s seat only)

Seats

170

2010 Odyssey０９／０４／１０　１６：２２：１６　３１ＳＨＪ６５０　０１７６　

Armrests

desired angle.

Head Restraints Seepage forimportantsafety informationandawarningabout improperlypositioningheadrestraints.

14

Your vehicle is equipped with head restraints in all seating positions to help protect you and your passengers from whiplash and other injuries.

An armrest is located on each of the front seats and on each side of the second row seats (depending on models). Pivot it down to use it. When you remove the bucket seats in the second row, pivot the armrests up out of the way.

OnEX-LandTouringmodels The angle of the armrest on each front seat is adjustable. Pivot the armrest down, and pull it up to the

Seats

They are most effective when you adjust them so the center of the back of the occupant’s head rests against the center of the restraint.

CONTINUED

171

2010 Odyssey０９／０４／１０　１６：２２：２４　３１ＳＨＪ６５０　０１７７　

Seats

Front and Second row seat CUSHION

Third row seat

LEG

SEAT BACK

RELEASE BUTTON

AdjustingtheHeadRestraint The front and rear head restraints adjust for height. You need both hands to adjust the restraint. Do not attempt to adjust it while driving. To raise it, pull upward. To lower the restraint, push the release button and push the restraint down.

RELEASE BUTTON

RemovingtheHeadRestraint To remove a head restraint for cleaning or repair, pull it up as far as it will go. Push the release button, then pull the restraint out of the seat- back.

172

When reinstalling a head restraint, put the legs back in place. Then adjust it to the appropriate height while pressing the release button.

Make sure the removed head restraints are securely stored.

Failure to reinstall the head restraints can result in severe injury during a crash.

Always replace the head restraints before driving.

2010 Odyssey０９／０４／１０　１６：２２：３２　３１ＳＨＪ６５０　０１７８　

Seats

This reduces the distance between the restraint and the occupant’s head. It also helps protect the occupants against whiplash and injuries to the neck and upper spine.

After a collision, the activated restraint should return to its normal position.

If the restraints do not return to their normal position, or in the event of a severe collision, have the vehicle inspected by a Honda dealer.

For a head restraint system to work properly:

Do not hang any items on the head restraints, or from the restraint legs.

Do not place any object between an occupant and the seat-back.

Install each restraint in its proper location.

Only use genuine Honda replacement head restraints.

ActiveHeadRestraints

The driver’s and front passenger’s seats have active head restraints. If the vehicle is struck severely from the rear, the occupant properly secured with the seat belt will be pushed against the seat-back and the head restraint will automatically move forward.

173

2010 Odyssey０９／０４／１０　１６：２２：３９　３１ＳＨＪ６５０　０１７９　

Seats

Third Row Seat Access

To get into or out of the third row seat, walk between the second row seats.

When the seat on the passenger’s side is moved to the center, walk through the passenger’s side to get into or out of the third row seat.

You need to remove the plus-one seat (see page make this seat arrangement.

) before you can

178

174

RELEASE LEVER

To get into or out of the third row seat, pull up the release lever on the shoulder of each second row bucket seat. The seat-back will tilt forward and the whole seat will slide forward.

2010 Odyssey０９／０４／１０　１６：２２：４７　３１ＳＨＪ６５０　０１８０　

Moving the Second Row Bucket Seat The second row bucket seat on the passenger’s side can be moved to the center to provide access to the third row seat.

Seats

HOOK

COVER

1.

Remove the passenger’s side second row bucket seat (see page 177

), then remove the cover.

If you have already set the floor mat under the passenger’s side bucket seat, make sure you remove it before moving the bucket seat.

2.

3.

Hook the front of the seat to the floor, then slide the seat toward the center of the vehicle.

Push the back of the seat down over the floor hooks. Make sure the seat is securely locked in place.

CONTINUED

175

2010 Odyssey０９／０４／１０　１６：２２：５２　３１ＳＨＪ６５０　０１８１　

Seats

To return the seat to the outside position, remove the seat, reinstall the cover, then reinstall the seat.

Make sure the seats are securely locked in place before driving. A seat that is not locked in place could fly around and cause injury in a sudden stop or crash.

Seats and Floor Mats

When the plus-one seat is in the center position, store the floor mat under the passenger’s side bucket seat as shown above.

When the passenger’s side bucket seat is in the outside position, and the plus-one seat is not used, install the floor mat and the cover over the floor anchors.

176

2010 Odyssey０９／０４／１０　１６：２３：０１　３１ＳＨＪ６５０　０１８２　

Outer position BUTTONS

TABS

Center position BUTTONS

TAB

SLIT

TAB

SLITS

TABS

To install the floor mat in an outer position or the center position, insert the tabs into the slits on the floor, then snap the two buttons in place. Refer to the illustrations above.

Seats

Removing the Bucket Seats in the Second Row

SEAT-BACK LEVER

LOCK RELEASE LEVER

Both seats can be removed to give more cargo capacity. Do not remove the seats while driving.

To remove a second row seat: Pull up the seat-back angle 1. adjustment lever, and fold the seat-back forward.

CONTINUED

177

2010 Odyssey０９／０４／１０　１６：２３：０８　３１ＳＨＪ６５０　０１８３　

Seats

To reinstall the seat, hook the front of the seat to the floor, then push the rear of the seat-back until it locks in place. Make sure the seat is securely latched before driving.

Removing the Second Row Plus-One Seat ExceptU.S.LXandCanadianDX models Your vehicle has a plus-one seat for the second row center position.

You can remove the plus-one seat when it is not used. Do not remove the seat while driving.

2.

Unlock the seat from the floor by pulling the lock release lever under the seat cushion’s front edge and lifting the rear of the seat.

3.

Unhook the front of the seat from the floor by pulling it back slightly, then pivoting it upward.

178

2010 Odyssey０９／０４／１０　１６：２３：１６　３１ＳＨＪ６５０　０１８４　

SEAT CUSHION STRAP

Seats

5.

Unhook the front of the seat from the floor by pulling it back slightly, then pivoting it upward.

SEAT-BACK STRAP

LOCK RELEASE LEVER

To remove the plus-one seat:

1.

Lower the head restraints fully.

4.

Unlock the seat from the floor by pulling the lock release lever and lifting the rear of the seat.

2.

Remove the seat cushion by pulling the seat cushion strap.

3.

Fold the seat-back forward by pulling the seat-back strap.

CONTINUED

179

2010 Odyssey０９／０４／１０　１６：２３：２２　３１ＳＨＪ６５０　０１８５　

Seats

Install the seat cushion on the seat bottom plate. To install the cushion, hook the front of the cushion first, then push down the rear until the cushion is securely positioned.

SEAT-BACK STRAP

To install the plus-one seat:

Hook the front of the seat to the floor, then push down the back until it locks. Make sure both the front and back of the seat are securely latched. Pull up the seat-back, and adjust the seat-back angle to the desired position while pulling the seat-back strap on the outside of the seat bottom.

180

To use the plus-one seat as a center console, remove its seat cushion by pulling up the seat cushion strap. Then pivot the seat-back forward until it is flat. Store the seat cushion in the floor storage area.

Make sure the seats are securely locked in place before driving. A seat that is not locked in place could fly around and cause injury in a sudden stop or crash.

2010 Odyssey０９／０４／１０　１６：２３：３０　３１ＳＨＪ６５０　０１８６　

Seats

Folding the One-Motion Third Row ‘‘Magic Seat’’ To create more cargo space, you can fold the one-motion third row ‘‘Magic Seat’’ into the floor recess.

1.

Unlatch the center seat detachable seat belt anchor, and let the belt retract all the way into the ceiling. Place the latch plate and anchor latch into their holding slots. Make sure both seat belts on the outer seats are out of the way.

2.

Lower the head restraints fully.

HANDLES

3.

Pull the handle on each seat-back to unlock the front legs of the third row seat.

4.

Pivot the seat into the cargo area floor recess.

Make sure all items in the cargo area are secured. Loose items can fly forward and cause injury if you Carrying have to brake hard. See Cargo

on page

378

CONTINUED

181

2010 Odyssey０９／０４／１０　１６：２３：３６　３１ＳＨＪ６５０　０１８７　

Seats

STRAPS

To return the seat to the upright position:

1.

Pull the seat out of the recess by pulling on the handle. Pivot the seat forward all the way. The front legs of the third row seat will automatically latch.

2.

Pull the seat-back upright with the strap. Make sure the seat is securely locked into position before driving.

182

2010 Odyssey０９／０４／１０　１６：２３：４３　３１ＳＨＪ６５０　０１８８　

Passenger’s seat

HEATERS

Driver’s seat

OnEX-LandTouringmodels Both front seats are equipped with seat heaters. The passenger seat only has heaters in the seat bottom because of the side airbag system. The ignition switch must be in the ON (II) position to use them. The seat heater switches are located on the dashboard above the center pocket. Push the top of the switch, HI, to rapidly heat up the seat. After the seat reaches a comfortable temperature, select LO by pushing

SEAT HEATER SWITCHES

the bottom of the switch. This will keep the seat warm.

Seat Heaters

In the HI setting, the heater turns off when the seat gets warm, and turns back on after the seat’s temperature drops. In LO, the heater does not cycle with temperature change.

Follow these precautions when using the seat heaters:

Use the HI setting only to heat the seats quickly, because it draws large amounts of current from the battery.

If the engine is left idling for an extended period, do not use the seat heaters, even on the LO setting. It can weaken the battery, causing hard starting.

183

2010 Odyssey０９／０４／１０　１６：２３：５２　３１ＳＨＪ６５０　０１８９　

Driving Position Memory System

OnTouringmodels Your vehicle has a memory feature for the driver’s seat and outside mirror positions.

Storing a Driving Position in Memory Store a driver’s seat position only when the vehicle is parked.

MEMO BUTTON

INDICATORS

Two seat and outside mirror positions can be stored in separate memories. You select a memorized position by pushing the appropriate button or using the appropriate remote transmitter (Driver 1 or Driver 2).

This setting can be linked or unlinked with the remote transmitter. For more information, see page

149

You can change the ‘‘MEMORY POSITION LINK’’ setting on the multi-information display (see page 116

).

1.

2.

3.

184

Turn the ignition switch to the ON (II) position. You cannot add a new seat position in memory unless the ignition switch is in the ON (II) position. You can recall a memorized position with the ignition switch in any position.

MEMORY BUTTONS

Adjust the seat to a comfortable position (see page

169

).

Adjust the outside mirrors for best visibility (see page

191

).

4.

Press and release the MEMO button on the driver’s door. You will hear a beep. Then, both indicators in the memory buttons will start to blink. Press and hold one of the memory buttons (1 or 2) within 5 seconds after you press the MEMO button. When the system completes storing a new driving position, you hear two beeps. The indicator in the stored memory button will come on.

2010 Odyssey０９／０４／１０　１６：２４：０５　３１ＳＨＪ６５０　０１９０　

Driving Position Memory System

Doing any of the following after pressing the MEMO button will cancel the storing procedure.

Fail to press a memory button within 5 seconds.

Pressing the MEMO button again within 5 seconds.

Readjust the seat position.

Readjusting the outside mirror position.

Each memory button stores only one driving position. Storing a new position erases the previous setting stored in that button’s memory. If you want to add a new position while retaining the current one, use the other memory button.

Selecting a Memorized Position

MEMORY BUTTONS

To select a memorized position, do this:

1.

Make sure the shift lever is in the Park (P) position.

2.

Press the desired memory button (1 or 2) until you hear a beep.

All stored driving positions will be lost if your vehicle’s battery goes dead or is disconnected.

The system will move the seat and outside mirrors to the memorized positions. The indicator in the

selected memory button will flash during movement. When the adjustments are complete, you will hear two beeps, and the indicator will remain on.

To stop the system’s automatic adjustment, do any of these actions:

Press any button on the driver’s door: MEMO, memory button 1 or 2. Push any of the adjustment switches for the seat. Shift out of Park. Adjust the outside mirrors.

If desired, you can use the adjustment switches to change the positions of the seat or outside mirrors after they are in their memorized positions. If you change the memorized position, the indicator in the memory button will go out. To keep this driving position for later use, you must store it in the driving position memory.

185

2010 Odyssey０９／０４／１０　１６：２４：１２　３１ＳＨＪ６５０　０１９１　

Power Windows

DRIVER’S WINDOW SWITCH

MAIN SWITCH

The windows will operate for up to 10 minutes after you turn off the ignition switch. Opening either front door cancels this function.

Closing a power window on someone’s hands or fingers can cause serious injury.

Make sure your passengers are away from the windows before closing them.

−

To open/close the driver’s

AUTO window, push the window switch firmly down or up to the second detent, and release it. The window will automatically go up or down all the way. To stop the window, pull/ push on the window switch briefly.

Turn the ignition switch to the ON (II) position to raise or lower any window. To open the window, push the switch down to the first detent and hold it. Release the switch when you want the window to stop. Pull back on the switch and hold it to close the window.

186

If the MAIN switch is OFF, the passenger windows cannot be raised or lowered. Keep the MAIN switch off when you have children in the vehicle so they do not injure themselves by operating the windows unintentionally.

−

AUTO REVERSE If the driver’s window senses any obstacle while it is closing automatically, it will reverse direction, and then stop. To close the window, remove the obstacle, then use the window switch again.

Auto reverse stops sensing when the window is almost closed. You should always check that all passengers and objects are away from the window before closing it.

The driver’s window auto NOTE: reverse function is disabled when you continuously pull up the switch.

2010 Odyssey０９／０４／１０　１６：２４：２１　３１ＳＨＪ６５０　０１９２　

If your vehicle’s battery is disconnected or goes dead, or the driver’s window fuse is removed, the AUTO function may be disabled. If the AUTO function is disabled, the power window system will need to be reset after reconnecting the battery or installing the fuse.

1.

2.

Start the engine. Push down and hold the driver’s window switch until the window is fully open.

Pull and hold the driver’s window switch to close the window completely, then hold the switch for about 2 seconds.

If the power windows do not operate properly after resetting, have your vehicle checked by your dealer.

Opening the Windows with the Remote Transmitter

UNLOCK BUTTON

OnEX,EX-LandTouringmodels You can open all of the windows from the outside with the remote transmitter.

1.

Press the UNLOCK button once to unlock the driver’s door.

Power Windows

2.

3.

Press the UNLOCK button a second time, and hold it. The passenger’s doors unlock, and all four windows start to open. To stop the windows, release the button.

To open the windows further, press the button again (within 10
seconds of step 1) and hold it. If the windows stop before the desired position, repeat steps 1
and 2.

You cannot close the windows with the remote transmitter.

187

2010 Odyssey０９／０４／１０　１６：２４：３２　３１ＳＨＪ６５０　０１９３　

Power Windows

Opening/Closing the Windows with the Key

3.

Turn the key clockwise again, and hold it. All four windows start to open. To stop the windows, release the key.

4.

To open the windows further, turn and hold the key again (within 10 seconds of step 2).

If the windows stop before NOTE: the desired position, repeat steps 2
and 3.

Close

Open

To close: 1.

Insert the key in the driver’s door lock.

2.

Turn the key counterclockwise, then release it.

3.

Turn the key counterclockwise again, and hold it. All four windows start to close. To stop the windows, release the key.

4.

To close the windows further, turn and hold the key again (within 10 seconds of step 2).

OnEX,EX-LandTouringmodels You can open and close the windows with the key in the driver’s door lock.

To open: 1.

Insert the key in the driver’s door lock.

2.

Turn the key clockwise, then release it.

188

2010 Odyssey０９／０４／１０　１６：２４：３９　３１ＳＨＪ６５０　０１９４　

Moonroof

If you try to open the moonroof in below-f reezing temperatures, or when it is covered with snow or ice, you can damage the moonroof panel or its motor.

The moonroof has a key-off delay. You can still open and close the moonroof for up to 10 minutes after you turn off the ignition. The key-off delay cancels as soon as you open either front door. You must then turn the ignition to the ON (II) position for the moonroof to operate.

To tilt up the back of the moonroof, press and hold the center button ). To close the moonroof, press and hold the top of the switch ). To open the moonroof, press and hold the bottom of the switch (

).

Opening or closing the moonroof on someone’s hands or fingers can cause serious injury.

Make sure all hands and fingers are clear of the moonroof before opening or closing it.

189

OnEX-LandTouringmodels The moonroof can be tilted up in the back for ventilation, or it can be slid back into the roof. Use the switch under the left dashboard vent to operate the moonroof. You must turn the ignition switch to the ON (II) position for the moonroof to operate.

2010 OdysseyOnU.S.EX-Lwithoutnavigationsystem andCanadianEX-Lmodels When you shift to reverse with the ignition switch in the ON (II) position, the rear view is shown on the left side of the inside mirror. For more information, see page

366

０９／０４／１０　１６：２４：４５　３１ＳＨＪ６５０　０１９５　

Mirrors

Keep the inside and outside mirrors clean and adjusted for best visibility. Be sure to adjust the mirrors before you start driving.

OnLX,EXandCanadianDXmodels The inside mirror has day and night positions. The night position reduces glare from headlights behind you. Flip the tab on the bottom edge of the mirror to select the day or night position.

OnEX-LandTouringmodels The inside mirror can automatically darken to reduce glare. To turn on this feature, press the button on the bottom of the mirror. The AUTO indicator comes on as a reminder. When it is on, the mirror darkens when it senses the headlights of a vehicle behind you, then returns to normal visibility when the lights are gone. Press the button again to turn off this feature.

190

2010 Odyssey０９／０４／１０　１６：２４：５４　３１ＳＨＪ６５０　０１９６　

Adjusting the Power Mirrors

SELECTOR SWITCH

ADJUSTMENT SWITCH

1.

Turn the ignition switch to the ON (II) position.

2.

Move the selector switch to L (driver’s side) or R (passenger’s side).

3.

Push the appropriate edge of the adjustment switch to move the mirror right, left, up, or down.

When you finish, move the selector switch to the center (off) position. This turns the adjustment switch off to keep your settings.

Mirrors

Reverse Tilt Door Mirror Ifequipped Both outside door mirrors have a reverse tilt feature. When in reverse, the selected mirror will tilt down slightly to improve your view as you parallel park. Shifting out of reverse will return the mirror to its original position.

To tilt the driver’s mirror, place the selector switch in the left position. To tilt the passenger’s mirror, place the switch in the right position. To turn the feature off, place the switch in the center position.

CONTINUED

191

2010 Odyssey０９／０４／１０　１６：２５：０２　３１ＳＨＪ６５０　０１９７　

Mirrors, Parking Brake

HeatedMirrors

Parking Brake

HEATED MIRROR BUTTON

PARKING BRAKE PEDAL

Driving the vehicle with the parking brake applied can damage the rear brakes and hubs. A beeper will sound if the vehicle is driven with the parking brake on.

OnTouringmodels You will also see a ‘‘RELEASE PARKING BRAKE’’ message on the multi-information display (see page 88

).