UPPER MARK LOWER MARK
4.
Remove the dipstick again, and check the level. It should be between the upper and lower marks.
If it is near or below the lower mark,
see
310
Adding Engine Oil
on page
250
Owner’s Maintenance on page
Refer to Checks for information about checking other items on your vehicle.
307
Engine Coolant Check
MAX
RESERVE TANK
MIN
Look at the coolant level in the
radiator reserve tank. Make sure it is
between the MAX and MIN lines. If
Adding
it is below the MIN line, see
Engine Coolant
for
315
information on adding the proper
coolant.
on page
2013 Insight12/07/13 17:08:57 31TM8630_256
TOC
Actual Mileage and EPA Fuel Economy Estimates Comparison. Fuel economy is not a fixed number. It varies based on driving conditions, driving habits, and vehicle condition. Therefore, it is not possible for one set of estimates to predict fuel economy precisely for all drivers in all environments. The EPA fuel economy estimates shown in the example to the right are a useful tool for comparison when buying a vehicle. EPA estimates include: City MPG Represents urban driving in light traffic. A range of miles per gallon achieved is also provided. Highway MPG mixture of rural and interstate driving, in a warmed-up vehicle, typical of longer trips in free-flowing traffic. A range of miles per gallon achieved is also provided.
Represents a
−
−
Fuel Economy
City MPG
Highway MPG
Combined Fuel Economy
Estimated Annual Fuel Cost
(Sample U.S. EPA label shown)
−
Combined Fuel Economy Represents a combination of city and highway driving. The scale represents the range of combined fuel economy for other vehicles in the class.
Estimated Annual Fuel Cost
−
Provides an estimated annual fuel
cost, based on 15,000 miles (20,000
km) per year multiplied by the cost
per gallon (based on EPA fuel cost data) divided by the combined fuel economy.
For more information on fuel economy ratings and factors that affect fuel economy, visit fueleconomy.gov (Canada: Visit
www.vehicles.gc.ca
www.
251
2013 Insight12/07/13 17:09:10 31TM8630_257
Fuel Economy
Fuel Economy Factors The following factors can lower your vehicle’s fuel economy:
Aggressive driving (hard acceleration and braking) Excessive idling, accelerating and braking in stop-and-go traffic Cold engine operation (engines are more efficient when warmed up) Driving with a heavy load or the air conditioner running Improperly inflated tires
TOC
Improving Fuel Economy VehicleMaintenance A properly maintained vehicle maximizes fuel economy. Poor maintenance can significantly reduce fuel economy. Always maintain your vehicle according to the maintenance messages displayed on the multi-
252
information display (see Maintenance Checks For example:
Owner’s
on page
307
).
Use the recommended viscosi ty motor oil, displaying the API Certification Seal (see page
311
).
Maintain proper tire inflation An underinflated tire increases − ‘‘rolling resistance,’’ which reduces fuel economy.
Avoid carrying excess weight in your vehicle It puts a heavier load on the engine, increasing fuel consumption.
−
−
Keep your vehicle clean In particular, a build-up of snow or mud on your vehicle’s underside adds weight and rolling resistance. Frequent cleaning helps your fuel economy.
DriveEfficiently
−
Drive moderately acceleration, abrupt cornering, and hard braking increase fuel consumption.
Rapid
−
Observe the speed limit Aerodynamic drag has a big effect on fuel economy at speeds above 45 mph (75 km/h). Reduce your speed and you reduce the drag. Trailers, car top carriers, roof racks and bike racks are also big contributors to increased drag.
Avoid excessive idling Idling results in 0 miles per gallon (0 kms per liter).
−
Use the ECON mode as much as possible.
2013 Insight12/07/13 17:09:19 31TM8630_258
Minimize the use of the air conditioning system puts an extra load on the engine which makes it use more fuel. Use the fresh-air ventilation when possible.
The A/C
−
TOC
Plan and combine trips Combine several short trips into one. A warmed-up engine is more fuel efficient than a cold one.
−
Calculating Fuel Economy
MeasuringTechniques Direct calculation is the recommended source of information about your actual fuel economy. Using frequency of fill-ups or taking fuel gauge readings are NOT accurate measures of fuel economy. Fuel economy may improve over the first several thousand miles (kilometers).
CheckingYourFuelEconomy
Fuel Economy
Miles driven
Gallons of fuel
Miles per Gallon
100
Liter
Kilometers
L per 100 km
1) 2) 3) 4)
Fill the fuel tank until the nozzle automatically clicks off. Reset trip counter to zero. Record the total gallons (liters) needed to refill. Follow one of the simple calculations above.
253
2013 Insight12/07/13 17:09:27 31TM8630_259
Accessories and Modifications
Modifying your vehicle, or installing non-Honda accessories, may make your vehicle unsafe. Before you make any modifications or add any accessories, be sure to read the following information.
Accessories Your dealer has Honda accessories that allow you to personalize your vehicle. These accessories have been designed and approved for your vehicle, and are covered by warranty.
Although non-Honda accessories may fit on your vehicle, they may not meet factory specifications, and could adversely affect your vehicle’s handling, stability, and reliability.
TOC
Improper accessories or modifications can affect your vehicle’s handling, stability, and performance, and cause a crash in which you can be hurt or killed.
Follow all instructions in this owner’s manual regarding accessories and modifications.
When properly installed, cellular phones, alarms, two-way radios, and low-powered audio systems should not interfere with your vehicle’s computer controlled systems, such as your airbags, anti-lock brakes, and tire pressure monitoring system (if equipped).
254
Before installing any accessory:
Make sure the accessory does not obscure any lights, or interfere with proper vehicle operation or performance.
Be sure electronic accessories do not overload electrical circuits (see page with the proper operation of your vehicle.
367
) or interfere
Before installing any electronic accessory, have the installer contact your dealer for assistance. If possible, have your dealer inspect the final installation.
Do not install accessories on the side pillars or across the rear windows. Accessories installed in these areas may interfere with proper operation of the side curtain airbags.
2013 Insight12/07/13 17:09:35 31TM8630_260
Accessories and Modifications
Modifying Your Vehicle Removing parts from your vehicle, or replacing components with non-Honda components could seriously affect your vehicle’s handling, stability, and reliability.
Some examples are:
Lowering your vehicle with a non-Honda suspension kit that significantly reduces ground clearance can allow the undercarriage to hit speed bumps or other raised objects, which could cause the airbags to deploy.
Raising your vehicle with a non-Honda suspension kit can affect the handling, stability, and reliability.
Non-Honda wheels, because they are a universal design, can cause excessive stress on suspension components and will not be compatible with the tire pressure monitoring system (TPMS) .
*
Larger or smaller wheels and tires can interfere with the operation of your vehicle’s anti-lock brakes and other systems.
Modifying your steering wheel or any other part of your vehicle’s safety features can make the systems ineffective.
If you plan to modify your vehicle, consult your dealer.
*
: U.S. models
TOC
255
2013 Insight12/07/13 17:09:44 31TM8630_261
Carrying Cargo
FLOOR STORAGE COMPARTMENT
DOOR POCKETS
CENTER POCKET
GLOVE BOX
TOC
Your vehicle has several convenient storage areas:
*
Glove box Door pockets Seat-back pockets Under floor storage Floor storage compartment Center tray Console compartment Center pocket(s) Cargo area
*
*
CARGO AREA
UNDER FLOOR STORAGE
SEAT-BACK POCKETS *
CENTER TRAY / * CENTER POCKET *
CONSOLE COMPARTMENT *
EX with navigation system model is shown. *
: If equipped
256
However, carrying too much cargo, or improperly storing it, can affect your vehicle’s handling, stability, stopping distance, and tires, and make it unsafe. Before carrying any type of cargo, be sure to read the following pages.
*
: If equipped
2013 Insight12/07/13 17:09:55 31TM8630_262
Load Limits The maximum load for your vehicle is 850 lbs (385 kg).
See Tire And Loading Information label attached to the driver’s doorjamb.
Label Example
TOC
This figure includes the total weight of all occupants, cargo, and accessories, and the tongue load if you are towing a trailer.
Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed.
Follow all load limits and other loading guidelines in this manual.
Steps for Determining Correct Load Limit − (1)
Locate the statement ‘‘The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.’’ on your vehicle’s placard.
(2)
Determine the combined weight of the driver and passengers that will be riding in your vehicle.
(3)
Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.
Carrying Cargo
(4)
The resulting figure equals the
available amount of cargo and
luggage load capacity. For
example, if the ‘‘XXX’’ amount
equals 1,400 lbs. and there will be
five 150 lb. passengers in your
vehicle, the amount of available
cargo and luggage load capacity is
650 lbs.
(1,400
150) = 650 lbs.)
750 (5
−
×
(5)
Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.
(6)
If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.
CONTINUED
257
2013 InsightIn addition, the total weight of the vehicle, all occupants, accessories, cargo, and trailer tongue load must not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). Both are on a label on the driver’s doorjamb.
12/07/13 17:10:01 31TM8630_263
Carrying Cargo
Max Load 850 lbs (385 kg)
Passenger Weight 150 lbs x 2 = 300 lbs (68 kg x 2 = 136 kg)
Cargo Weight 550 lbs (249 kg)
Max Load 850 lbs (385 kg)
Passenger Weight 150 lbs x 4 = 600 lbs (68 kg x 4 = 272 kg)
Cargo Weight 250 lbs (113 kg)
Max Load 850 lbs (385 kg)
Passenger Weight 150 lbs x 5 = 750 lbs (68 kg x 5 = 340 kg)
Cargo Weight 100 lbs (45 kg)
TOC
Example 1
Example 2
Example 3
258
2013 Insight12/07/13 17:10:10 31TM8630_264
Carrying Cargo
Carrying Items in the Passenger Compartment
Store or secure all items that could be thrown around and hurt someone during a crash.
Carrying Cargo in the Cargo Area
Distribute cargo evenly on the floor of the hatch, placing the heaviest items on the bottom and as far forward as possible.
TOC
Be sure items placed on the floor behind the front seats cannot roll under the seats and interfere with the driver’s ability to operate the pedals, the operation of the seats, or the operation of the sensors under the seats.
Keep the glove box closed while driving. If it is open, a passenger could injure their knees during a crash or sudden stop.
Try to secure the items with rope or cord so they will not shift while you are driving.
Do not stack items higher than the back of the rear seats. They can block your view and be thrown around the vehicle during a crash.
Do not spill any liquids on or around the IMA battery. Spilled liquids may damage the IMA battery. If you accidentally spill liquids on or around the battery, ensure that the spill is completely wiped up at the earliest possible time.
If you carry large items that
prevent you from closing the
hatch, exhaust gas can enter the
passenger area. To avoid the
possibility of
poisoning
on page
56
, follow the instructions
carbon monoxide
If you fold the rear seats down, tie down items that could be thrown about the vehicle during a crash or sudden stop. Keep all cargo below the bottom of the windows. If it is higher, it could interfere with proper operation of the side curtain airbags.
Refer to page seats.
145
for folding rear
259
2013 InsightDo not spill any liquids over the air intake or insert any foreign objects in it. This may damage the IMA battery and the power control unit.
12/07/13 17:10:14 31TM8630_265
Carrying Cargo
Air Intake
TOC
AIR INTAKE
The air intake for the IMA battery and electronics is located on the rear left pillar. Do not block this air intake. Doing so may cause the IMA battery and the power control unit to overheat, causing the IMA to shut down. It will start working again after it cools.
260
2013 Insight12/07/13 17:10:18 31TM8630_266
Driving
This section gives you tips on starting the engine under various conditions, and how to operate the automatic transmissions (CVT). It also includes important information on parking your vehicle, the braking system, the vehicle stability assist (VSA ) system, and the tire pressure monitoring system (TPMS).
. 262
........................
Preparing to Drive
. 263
.......................
Starting the Engine
Eco Assist System
........................
. 264
Automatic Transmission (CVT) . 271
Driving with the Paddle
Shifters
....................................... Auto Idle Stop ................................ Parking ........................................... Braking System ............................. Anti-lock Brakes (ABS) ............... Tire Pressure Monitoring System ...................................... Vehicle Stability Assist (VSA ),
(TPMS)
. 276
. 281
. 284
. 285
. 287
. 289
aka Electronic Stability
Hill Start Assist System
Control (ESC), System . 293
. 295
. 296
.... ........... ...........................
Towing a Trailer
261
2013 Insight12/07/13 17:10:27 31TM8630_267
Preparing to Drive
You should do the following checks and adjustments before you drive your vehicle.
1.
Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice.
2.
Check that the hood and hatch are fully closed.
3.
Visually check the tires. If a tire looks low, use a gauge to check its pressure (see page
338
).
TOC
262
4.
5.
6.
Check that any items you may be carrying are stored properly or fastened down securely.
9.
Fasten your seat belt. Check that your passengers have fastened their seat belts (see page ).
17
Check the seat adjustment (see page
141
).
Check the adjustment of the inside and outside mirrors (see page
147
).
10.
When you start the engine, check
the gauges and indicators in the
instrument panel, and the
messages on the multi-information
display (see pages
).
89
61 72
and
7.
Check the steering wheel
adjustment (see page
128
).
8.
Make sure the doors are securely closed and locked.
2013 Insight12/07/13 17:10:34 31TM8630_268
1.
Apply the parking brake.
2.
In cold weather, turn off all electrical accessories to reduce the drain on the battery.
3.
Make sure the shift lever is in Park. Press on the brake pedal.
4.
Without touching the accelerator pedal, turn the ignition key to the START (III) position. Do not hold the key in the START (III) position for more than 15 seconds at a time. If the engine does not start right away, pause for at least 10 seconds before trying again.
TOC
The immobilizer system protects your vehicle f rom thef t. If an improperly coded key (or other device) is used, the engine’s f uel system is disabled. For more inf ormation, see page
130
Starting the Engine
Starting in Cold Weather In cold weather, the conventional starter is used instead of the IMA system starter. This is normal.
The engine is harder to start in cold
weather. Also, the thinner air f ound at
altitudes above 8,000 f eet (2,400
meters) adds to this problem.
263
2013 Insight12/07/13 17:10:41 31TM8630_269
Eco Assist System
ECON BUTTON
TOC
Eco Assist System is a driver feedback system designed to help you develop and maintain a fuel efficient driving style.
264
ECON MODE INDICATOR
Ambient Meter
Eco-drive Result
Eco Drive Bar
The system monitors your driving style, and can display how it impacts your vehicle’s fuel economy. You can then make adjustments to your driving style to maximize fuel economy. (For additional information on fuel economy, see page
251
.)
Your vehicle’s fuel economy may improve more with the ECON mode on (see page
127
).
The driver feedback information is shown in two locations:
The ambient meter, located behind the speedometer (see page
72
).
The multi-information display (see page
75
).
2013 Insight12/07/23 10:21:17 31TM8630_270
Eco Drive Bar
Center Position
Deceleration Monitor
Acceleration Monitor
TOC
Eco Drive Bar
Efficient Zones
Inefficient Braking Zone
Inefficient Driving Zone
ECO ELEMENTS The Eco Drive Bar on the ecological drive display appears on the multi- information display while you drive.
During acceleration, the bar extends to the right of the center line.
During deceleration, the bar extends to the left of the center line.
If the bar stays within the Efficient Driving Zones, your current driving style is conducive to good fuel economy.
If the bar extends into the Inefficient Driving Zones, your current driving style is not conducive to good fuel economy.
It is recommended to drive in the D position for better fuel efficiency.
Eco Assist System
EcoDriveBarExamples
Eco Drive Bar
Driving Style
Slow, steady acceleration - maximizes fuel economy Slow deceleration - maximizes fuel economy Moderate acceleration
Moderate deceleration
Aggressive/ Inconsistent acceleration - lowers fuel economy Aggressive deceleration - lowers fuel economy
CONTINUED
265
2013 Insight12/07/13 17:11:02 31TM8630_271
Eco Assist System
AmbientMeter
AMBIENT METER (Background Color)
TOC
U.S. model is shown.
The Ambient Meter (the light behind the speedometer) changes color to show the effects of your driving style. This feature can be turned off (see page
103
).
266
Meter Background Color
Fuel Economy
Green
High
Blue Green
Blue
Low
2013 Insight12/07/13 17:11:10 31TM8630_272
Eco Assist Scoring A point system is used so you can monitor your driving style and the impact on fuel economy. Points are:
Accumulated when your driving style is fuel efficient Deducted when your style is not fuel efficient
TOC
Eco Assist System
Real Time Score
FIRST STAGE
SECOND STAGE
THIRD STAGE
PLANT ICON
With the ignition switch in the ON (II) position
Eco Assist scoring is displayed on the multi-information display in the following ways:
−
Your current
Real Time Score trip is represented on the ecological drive display, starting without any leaves on the plants. Leaves then accumulate during the current trip, as long as you maintain an economic driving style.
CONTINUED
267
2013 Insight12/07/13 17:11:16 31TM8630_273
Eco Assist System
−
Drive Cycle Score The score from your just completed trip is represented on the Eco Score screen by the ‘‘plant’’ icons.
Drive Cycle Score/Lifetime Points
STAGE-UP RECOGNITION ICON
TOC
−
Cumulative, or
Lifetime Points lifetime trips, which build up over time, represented by a bar graph at the bottom of the Eco Score display.
Each time you turn the ignition switch to the LOCK (0) position, the Eco Score displays for a few seconds to show your current stage and lifetime points.
STAGE-DOWN RECOGNITION ICON
When turning off the ignition switch
268
TROPHY
DRIVE CYCLE SCORE
LIFETIME POINTS
2013 Insight12/07/13 17:11:28 31TM8630_274
There are three Eco stages, with five plants per stage. As you accumulate a specified number of leaves, you advance from one stage to the next. The plant grows leaves from left to right, or loses them from right to left. A trophy icon appears once you have reached the maximum third stage score. The scoring system for points is based on:
Braking and accelerating Vehicle speed ECON button usage Idle duration
TOC
Eco Assist System
Real time scores must accumulate over time to result in a stage change. In order to build lifetime points and advance to the next stage, you need to keep your efficient driving style every time you make a trip. It can take several months to move from one stage to the next. Individual results will vary. Stages/Displays and Icons
Definition
First Stage
A total of two leaves can be put on each plant icon.
Second Stage
A total of four leaves can be added to each plant icon.
Third Stage
A circular shaped icon, which represents a blossom, can be added on top of each plant icon with four leaves.
Maximum Score Icons
First Stage
Second Stage
Third Stage
An icon appears once you have reached the maximum score for each stage and are moving up to the next stage. These icons appear briefly when the ignition switch is turned off. Once the 3rd stage maximum score is reached, the system continues to monitor your driving. If you maintain a fuel efficient driving style, your score remains at the highest stage. If you drive less efficiently, points will be deducted and you may drop (stage down) to the previous stage.
CONTINUED
269
2013 Insight12/07/13 17:11:39 31TM8630_275
Eco Assist System
As you progress to a higher level, the system monitors your driving style more strictly. As a result, you must further refine your driving style to continue to move up to the next level.
The following are some of the conditions that may affect your score:
Extremely high or low ambient temperature Inconsistent acceleration use, such as pumping the pedal repeatedly within a short period of time Frequent use of the climate control system Short distance trips
TOC
270
Reset the System The following procedure clears all leaves and your lifetime points. This procedure must be followed exactly.
Turn the ignition switch to the ON (II) position. Confirm that the ECON mode is OFF. If it is OFF, proceed to step 1. Do
run the engine.
not
If the ECON mode is on, press and release the ECON button to turn it off. You also need to turn the ignition switch off.
Turn the ignition switch to the ON run ON (II) position again. the engine.
not
Do
Complete the following steps within 30 seconds: 1.
Press and release the brake pedal at least two times. The ambient meter color changes from blue to green .
*
2.
Press and release the ECON button two times (ECON mode comes on, then goes off). The ambient meter color goes off, and the accumulated data is cleared.
3.
Turn the ignition switch to the LOCK (0) position.
*
The ambient meter color changes only if the multi- information display’s meter color change setting is on. (See page
103
.)
2013 Insight12/07/13 17:11:46 31TM8630_276
Automatic Transmission (CVT)
Shift Lever Position Indicators
Continuously Variable Transmission (CVT) Honda’s Continuously Variable Transmission’s unique design provides a smooth, constant flow of power. It is electronically controlled for more precise operation and better fuel economy.
TOC
Insight and LX models
These indicators on the instrument panel show which position the shift lever is in.
The ‘‘D’’ indicator comes on for a few seconds when you turn the ignition switch to the ON (II) position. If it flashes while driving (in any shift position), it indicates a possible problem in the transmission.
EX models
If the malfunction indicator lamp comes on along with the ‘‘D’’ indicator, there is a problem with the automatic transmission control system. Avoid rapid acceleration, and have the transmission checked by your dealer as soon as possible. When the ‘‘D’’ indicator warns of a possible problem with the transmission, you will see a ‘‘CHECK TRANSMISSION’’ message on the multi-information display.
271
2013 Insight12/07/13 17:11:52 31TM8630_277
Automatic Transmission (CVT)
Shifting
InsightandLXmodels
To shift from:
Do this:
EXmodels
To shift from:
Press the brake pedal and press the release button.
Press the release button.
Move the lever.
P to R
R to P N to R D to S S to L L to S S to D D to N N to D R to N
P to R
R to P N to R D to S S to D D to N N to D R to N
TOC
To shift from Park to any position, press the brake pedal, the release button on the front of the shift lever, then pull the lever. You cannot shift out of Park when the ignition switch is in the LOCK (0) or the ACCESSORY (I) position.
272
Do this:
Press the brake pedal and press the release button.
Press the release button.
Move the lever.
2013 Insight12/07/13 17:11:59 31TM8630_278
Automatic Transmission (CVT)
−
This position mechani-
Park (P) cally locks the transmission. Use Park whenever you are turning off or starting the engine. To shift out of Park, you must press on the brake pedal and have your foot off the accelerator pedal. Press the release button on the front of the shift lever to move it.
If you have done all of the above and
still cannot move the lever out of
Park, see
on
page
275
Shift Lock Release
You must also press the release button to shift into Park. To avoid transmission damage, come to a complete stop before shifting into Park. The shift lever must be in Park before you can remove the key from the ignition switch.
TOC
−
Press the brake
Reverse (R) pedal and the release button on the front of the shift lever to shift from Park to reverse. To shift from reverse to neutral, come to a complete stop, and then shift. Press the release button before shifting into reverse from neutral.
−
Neutral (N) Use Neutral if you need to restart a stalled engine or if it is necessary to stop briefly with the engine idling. Always shift to the Park position if you need to leave the vehicle for any reason. Press on the brake pedal when you are moving the shift lever from Neutral to another position.
−
Use this position for
Drive (D) your normal driving. The transmission automatically adjusts to keep the engine at the best speed for driving conditions. To help the engine warm up faster, the transmission will select ratios that allow the engine to run at higher speeds when it is cold.
−
To shift into the S
InsightandLXmodels Second (S) position, press the release button on the front of the shift lever, and move the lever to S. Selecting Second shifts the transmission into a lower range of ratios for better acceleration and increased engine braking. Use Second when you are going down a steep hill.
CONTINUED
273
2013 Insight12/07/13 17:12:05 31TM8630_279
Automatic Transmission (CVT)
−
To shift into the S
EXmodels Second (S) position, press the release button on the front of the shift lever, and move the lever to S. The S position is similar to D, except the range of ratios are different for better acceleration and increased engine braking.
Speed Limiter
When the vehicle reaches the
maximum speed in any shift position,
you may feel the engine cut in and
out. This is caused by a limiter (112
mph, 180 km/h) in the engine’s
computer controls. The engine will
run normally when you reduce the
speed to below the maximum.
With the shift lever in D or S, you can also use the paddle shifters to shift the transmission up or down. With the paddle shifters, you can operate the transmission much like a manual transmission without a clutch pedal. For more information on driving with the paddle shifters, see page
276
−
To shift to Low, press
InsightandLXmodels Low (L) the release button on the front of the shift lever. Use Low to make better use of engine power when climbing, and for maximum engine braking when going down steep hills.
For faster acceleration when in D, S, or L, the transmission will automatically ‘‘kick down’’ to a lower range of ratios by pushing the accelerator pedal to the floor.
TOC
274
2013 Insight12/07/13 17:12:13 31TM8630_280
Shift Lock Release This allows you to move the shift lever out of Park if the normal method of pushing on the brake pedal and pressing the release button does not work.
1.
Set the parking brake.
2.
Remove the key from the ignition switch.
3.
Put a cloth on the notch of the shift lock release slot cover to prevent scratches. Using a small flat-tip screwdriver or a metal fingernail file, carefully pry on the notch of the cover to remove it.
TOC
Automatic Transmission (CVT)
RELEASE BUTTON
4.
Insert the key in the shift lock release slot.
5.
Push down on the key while you press the release button on the shift lever and move the shift lever out of Park to neutral.
SHIFT LOCK RELEASE SLOT
6.
Remove the key from the shift lock release slot, then reinstall the cover. Make sure the notch on the cover is on the left side. Insert the key into the ignition switch, press the brake pedal, and restart the engine.
If you need to use the shift lock release, it means your vehicle is developing a problem. Have it checked by your dealer.
275
2013 Insight12/07/13 17:12:20 31TM8630_281
Driving with the Paddle Shifters
Using the Paddle Shifters in the D position (D-Paddle Shift Mode) OnEXmodels When you are driving in the D position, pulling either paddle shifter switches from the D-normal shift mode to the D-paddle shift mode. You can shift the transmission up or down through seven-stages manually with the paddle shifters.
Downshifting gives you more power when climbing, and provides engine braking when going down a steep hill.
TOC
276
To shift up or down, use the (right) or either side of the steering wheel.
(left) paddle shifter on
−
+
Pull the + upshift. Pull
(right) paddle shifter to (left) to downshift. −
SHIFT INDICATOR
When you pull either paddle shifter, the shift indicator shows you the selected speed number.
When the transmission returns to ordinary automatic transmission (CVT), the displayed shift indicator disappears.
2013 Insight12/07/13 17:12:25 31TM8630_282
−
(left)
Downshifting with the paddle shifter allows you to increase the engine braking when going down steep or long hills, and provides more power when climbing uphills. You can upshift the transmission manually to reduce the rpm.
TOC
Driving with the Paddle Shifters
To cancel the D-paddle shift mode manually, pull and hold the side paddle shifter until the shift indicator goes out.
+
The transmission remains in the selected speed if you do not accelerate.
The transmission control system monitors the accelerator pedal use and your driving conditions. When you press the accelerator pedal as in the normal driving, the system judges that you are driving at a constant cruising speed without using the paddle shifters. Under these conditions, D-paddle shift mode is canceled, and the transmission automatically returns to ordinary automatic transmission (CVT).
CONTINUED
277
2013 Insight12/07/13 17:12:32 31TM8630_283
Driving with the Paddle Shifters
The transmission downshifts to first speed and returns to ordinary automatic transmission (CVT) when the vehicle comes to a complete stop and the vehicle speed is about 6 mph (10 km/h).
If there is a problem in the transmission while you are driving with the paddle shifters, the D indicator flashes, the D-paddle shift mode is canceled, and the transmission returns to ordinary automatic transmission (CVT).
The automatic transmission (CVT) will not allow you to shift if:
You downshift before the engine speed reaches the highest threshold of the lower speed.
If you try to do this, the shift indicator will flash the number of the lower speed several times, then return to a higher speed.
You upshift before the engine speed reaches the lowest threshold of the higher speed.
You pull both paddle shifters at the same time.
You pull one of the two paddle shifters with another paddle shifter being pulled.
Each time you pull either paddle shifter, the transmission shifts one speed up or down. If you want to shift up or down more than two speeds, pull the paddle shifter twice, pause, and then pull it again.
TOC
278
2013 Insight12/07/13 17:12:40 31TM8630_284
TOC
Using the Paddle Shifters in the S position (7-Speed Manual Shift Mode) OnEXmodels With the shift lever in the S position, you can select the 7-speed manual shift mode to shift speeds; much like a manual transmission using the paddle shifters, but without a clutch pedal.
To enter the 7-speed manual shift mode, press the release button on the front of the shift lever, move the lever to the S position, then pull either paddle shifter. To cancel the 7-speed manual shift mode and return to the ordinary automatic transmission (CVT), move the shift lever from the S position. When moving the shift lever, be careful not to operate incorrectly. While you are driving in the 7-speed manual shift mode, the transmission will not automatically return to the ordinary automatic transmission (CVT).
Driving with the Paddle Shifters
‘‘M’’ INDICATOR
If you keep depressing the accelerator pedal without pulling the paddle shifter, the speed will be automatically shifted up just before the tachometer’s red zone.
The transmission also shifts automatically as the vehicle comes to a complete stop. It downshifts to first speed when the vehicle speed reaches 6 mph (10 km/h) or less.
SHIFT INDICATOR
When you move the shift lever from the ‘‘D’’ to the ‘‘S’’ position and pull either paddle shifter, the shift indicator displays ‘‘M’’ along with the selected speed number.
To upshift, pull the shifter. To downshift, pull the (left) paddle shifter.
+
(right) paddle
−
−
(left)
Downshifting with the paddle shifter allows you to increase the engine braking when going down steep or long hills, and provides more power when climbing uphills. You can upshift the transmission manually to reduce the rpm.
CONTINUED
279
2013 Insight12/07/13 17:12:48 31TM8630_285
Driving with the Paddle Shifters
Recommended Shift Points Drive in the highest speed number that lets the engine run and accelerate smoothly. This will give you effective emissions control. The following shift points are recommended:
−
L (Low) mode To shift to Low, pull and hold both paddle shifters simultaneously until you see L in the shift indicator. Use Low to get more power when climbing, and for maximum engine braking when going down steep hills.
Shift up
Normal acceleration
→
→
→
→
→
→
15 mph (24 km/h)
25 mph (40 km/h)
40 mph (64 km/h)
45 mph (72 km/h)
50 mph (81 km/h)
55 mph (89 km/h)
The automatic transmission (CVT) will not allow you to shift if: