Login- Download PDF Manual
-
Maintenance
This section explains why it is important to keep your vehicle well maintained and how to follow basic maintenance safety precautions.
This section also includes instructions on how to read the maintenance minder messages on the multi-information display, and instructions for simple maintenance tasks you may want to take care of yourself.
If you have the skills and tools to perform more complex maintenance tasks on your vehicle, you may want to purchase the service manual. See page for information on how to obtain a copy, or see your dealer.
435
. 336
Maintenance Safety . 337
Maintenance Minder . 347
Fluid Locations . 348
Adding Engine Oil . 350
Changing the Oil and Filter . 353
Engine Coolant Windshield Washers . 355
Automatic Transmission Fluid . 356...................... .................... .............................. ........................ ......... .............................. .................... ....
Continuously Variable Transmission (CVT)
............ .................................... ............................................. ................................ ................ ..................................... .................. ................................. ............................................... ...... .............................
Brake Fluid Lights Roof Antenna Cleaning the Seat Belts Floor Mats Dust and Pollen Filter Wiper Blades Tires Checking the 12 Volt Battery Vehicle Storage
. 356
. 357
. 359
. 369
. 369
. 369
. 370
. 370
. 375
. 381
. 383335
2010 Insight ０８／１２／２７ １２：１０：２９ ３１ＴＭ８６００ ０３４１
Maintenance Safety
All service items not detailed in this section should be performed by a certified technician or qualified mechanic.
Important Safety Precautions To eliminate potential hazards, read the instructions before you begin, and make sure you have the tools and skills required.
Make sure your vehicle is parked on level ground, the parking brake is set, and the engine is off.
To clean parts, use a commercially available degreaser or parts cleaner, not gasoline.
To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames away from the battery and all fuel-related parts.
336
Wear eye protection and protective clothing when working with the battery or compressed air.
Burns from hot parts. Let the engine and exhaust system cool down before touching any parts.
Improperly maintaining this vehicle, or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed.
Always follow the inspection and maintenance recommendations and schedules in this owner’s manual.
Potential Vehicle Hazards
Carbon Monoxide poison from engine exhaust. Be sure there is adequate ventilation whenever you operate the engine.
Injury from moving parts. not run the engine unless instructed to do so.
Do
Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.
Always follow the procedures and precautions in this owner’s manual.
Some of the most important safety precautions are given here. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.
2010 Insight ０８／１２／２７ １２：１０：３６ ３１ＴＭ８６００ ０３４２
Your vehicle displays engine oil life and maintenance service items on the multi-information display to show you when you should have your dealer perform engine oil replacement and indicated maintenance service.
Based on the engine operating conditions, the onboard computer in your vehicle calculates the remaining engine oil life and displays it as a percentage.
Maintenance Minder
Engine Oil Life Display
ENGINE OIL LIFE DISPLAY
The remaining engine oil life is shown on the display according to this table:
Calculated Engine
Oil Life (%)
100% 90% 80% 70% 60% 50% 40% 30% 20% 15% 10% 5%
91% 81% 71% 61% 51% 41% 31% 21% 16% 11% 6% 1%
− − − − − − − − − − − − 0%
REMAINING ENGINE OIL LIFE
To see the current engine oil life displayed on the multi-information display, turn the ignition switch to the ON (II) position, and press the SEL/RESET button on the steering wheel repeatedly until the engine oil life is displayed.
Displayed
Engine Oil Life
(%) 100% 90% 80% 70% 60% 50% 40% 30% 20% 15% 10% 5% 0%
CONTINUED
337
2010 Insight ０８／１２／２７ １２：１０：４３ ３１ＴＭ８６００ ０３４３
Maintenance Minder
MAINTENANCE SUB ITEM CODE (S)
Pressing either INFO button ( / ) ▲ ▼ switches the display from the message to another display. Once you switch the display, this message will go off.
SUB ITEM (S)
Along with the message, the system message indicator comes on (see page
70
).
The message appears on the multi- information display each time you turn the ignition switch to the ON (II) position.
This message reminds you that your vehicle will soon be due for scheduled maintenance.
MAIN ITEM (S)
REMAINING ENGINE OIL LIFE
Press the SEL/RESET button on the steering wheel repeatedly to select the engine oil life information. Along with the ‘‘OIL LIFE’’ message, you will see the percentage of the remaining engine oil life and the maintenance item codes on the multi-information display.
MAINTENANCE MAIN ITEM CODE (S)
When the remaining engine oil life is 15 to 6 percent, the multi-information display shows a ‘‘SERVICE DUE SOON’’ message along with the maintenance item code(s) indicating the main and sub items required at the time of the oil change. Refer to page for a complete list of the maintenance main items and sub items.
346
338
2010 Insight ０８／１２／２７ １２：１０：５０ ３１ＴＭ８６００ ０３４４
Maintenance Minder
Pressing either INFO button ( / ) ▲ ▼ switches the display from the message to another display. Once you switch the display, this message will go off.
Along with the message, the system message indicator comes on (see page
70
).
When the remaining oil life is 5 to 1
percent, the multi-information display shows a ‘‘SERVICE DUE NOW’’ message with the same maintenance items ‘‘SERVICE DUE SOON’’ was displayed with. When you see this message, have the indicated maintenance performed as soon as possible.Press the SEL/RESET button on the steering wheel repeatedly to select the engine oil life. The message ‘‘SERVICE,’’ along with ‘‘5%,’’ and the maintenance item code are displayed on the multi-information display when the calculated engine oil life is −
5 percent (see page
337
).
CONTINUED
339
2010 Insight ０８／１２／２７ １２：１０：５７ ３１ＴＭ８６００ ０３４５
Maintenance Minder
These messages will come on every time you turn the ignition switch to the ON (II) position.
Immediately have the service performed, and make sure to reset the display as described on page
342
Pressing either INFO button ( / ) ▲ ▼ switches the display from the message to another display. To see the message again, press either INFO button repeatedly.
Along with the message, the system message indicator comes on (see page
70
).
Press the SEL/RESET button on the steering wheel repeatedly to select the engine oil life. The message ‘‘SERVICE,’’ along with ‘‘0%,’’ and the maintenance item code are displayed on the multi-information display when the calculated engine oil life is −
1 percent.
If the indicated maintenance service is not done and the remaining engine oil life reaches 0%, the multi- information display will show the message ‘‘SERVICE PAST DUE’’ and the maintenance item code(s). This message is displayed when the total distance traveled is less than 10
miles (for U.S. models) or 10 km (for Canadian models) after the engine oil life became 0%.340
2010 Insight ０８／１２／２７ １２：１１：０４ ３１ＴＭ８６００ ０３４６
This message is displayed again when you drive over 10 miles (for U.S. models) or 10 km (for Canadian models) after seeing the 0% message.
Immediately have the service performed, and make sure to reset the display as described on page
342
Pressing either INFO button ( / ) ▲ ▼ switches the display from the message to another display. To see the message again, press either INFO button repeatedly.
TOTAL PAST DUE MILEAGE
U.S.
CANADA
MAINTENANCE ITEM CODE (S)
If the indicated required service is not done and the remaining engine oil life becomes 0%, the multi- information display will show a ‘‘SERVICE PAST DUE’’ message, the total distance traveled after the remaining oil life became 0%, and the maintenance item code(s).
Maintenance Minder
U.S.
CANADA
TOTAL PAST DUE MILEAGE
When you press the SEL/RESET button to select the engine oil life, the message ‘‘SERVICE,’’ along with the maintenance item code(s) and the total negative distance traveled after the oil life became 0%, will be displayed on the multi-information display.
341
2010 Insight ０８／１２／２７ １２：１１：１３ ３１ＴＭ８６００ ０３４７
Resetting the Engine Oil Life Display Your dealer will reset the display after completing the required maintenance service. You will see ‘‘OIL LIFE 100%’’ on the display the next time you turn the ignition switch to the ON (II) position.
If maintenance service is done by someone other than your dealer, reset the maintenance minder as follows:
1.
Turn the ignition switch to the ON (II) position.
Maintenance Minder
Maintenance Main Items and Sub Items
MESSAGE DISPLAY
ENGINE OIL LIFE DISPLAY
MAINTENANCE MAIN ITEM
MAINTENANCE SUB ITEMS
All the maintenance items displayed in the multi-information display are in code.
For an explanation of the maintenance codes, see page
346
342
INFO BUTTONS (
▲ ▼
Models with cruise control
SEL/RESET BUTTON
2.
3.
If the engine oil life is not displayed, press the SEL/RESET button on the steering wheel repeatedly.
Press and hold the SEL/RESET button on the steering wheel for more than 10 seconds. The remaining engine oil life reset mode will be shown on the multi- information display.
2010 Insight ０８／１２／２７ １２：１１：１９ ３１ＴＭ８６００ ０３４８
SEL/RESET BUTTON
INFO BUTTON ▲ ▼
Models without cruise control
4.
▲ ▼
Select ‘‘RESET’’ by pressing the INFO ( / ) button, then press the SEL/RESET button to reset the engine oil life display. The maintenance item code(s) will disappear, and the engine oil life will reset to ‘‘100.’’ If you want to cancel the oil life reset mode, select ‘‘CANCEL.’’
Maintenance Minder
Important Maintenance Precautions If you have the required service done but do not reset the display, or reset the display without doing the service, the system will not show the correct maintenance intervals. This can lead to serious mechanical problems because you will no longer have an accurate record of when maintenance is needed.
CONTINUED
343
2010 Insight ０８／１２／２７ １２：１１：２３ ３１ＴＭ８６００ ０３４９
We recommend using Honda parts and fluids whenever you have maintenance done. These are manufactured to the same high quality standards as the original components, so you can be confident of their performance and durability.
Maintenance Minder
Your authorized Honda dealer knows your vehicle best and can provide competent, efficient service.
However, service at a dealer is not mandatory to keep your warranties in effect. Maintenance may be done by any qualified service facility or person who is skilled in this type of automotive service. Make sure to have the service facility or person reset the display as previously described. Keep all receipts as proof of completion, and have the person who does the work fill out your Honda Service History or Canadian Maintenance Log. Check your warranty booklet for more information.
344
2010 Insight ０８／１２／２７ １２：１１：３２ ３１ＴＭ８６００ ０３５０
Maintenance Minder
U.S. Vehicles: Maintenance, replacement, or repair of emissions control devices and systems may be done by any automotive repair establishment or individual using parts that are ‘‘certified’’ to EPA standards.
According to state and federal regulations, Honda will not deny a claim for emissions warranty coverage simply because you did not maintain the vehicle or do not have maintenance records to show that you did. However, any part of that fails because of abuse or lack of required maintenance will not be covered by this warranty.
Owner’s Maintenance Checks You should check the following items at the specified intervals. If you are unsure of how to perform any check, turn to the appropriate page listed.
−
Check the operation of
Lights the headlights, parking lights, taillights, high-mount brake light, turn signals, brake lights, and license plate light monthly. See page
359
Engine oil level time you fill the fuel tank. See page
Check every
288
−
Engine coolant level radiator reserve tank every time you fill the fuel tank. See page
Check the
289
−
Automatic transmission Check the fluid level monthly. See page 356
−
Brakes monthly. See page
−
Check the fluid level
357
−
Tires Check the tire pressure monthly. Examine the tread for wear and foreign objects. See page 375
CONTINUED
345
2010 Insight ０８／１２／２７ １２：１１：４０ ３１ＴＭ８６００ ０３５１
Maintenance Minder
Symbol
Symbol
Maintenance Main Items
Replace engine oil ＊ Replace engine oil and oil filter ＊ Inspect front and rear brakes Check parking brake adjustment Inspect these items:
Tie rod ends, steering gear box, and boots Suspension components Driveshaft boots Brake hoses and lines (including ABS/VSA) All fluid levels and condition of fluids Exhaust system ＃ Fuel lines and connections ＃
＊
If the message ‘‘SERVICE DUE NOW’’ does not appear more than 12 months after the display is reset, change the engine oil every year.
See information on maintenance and emissions warranty on page
345
Independent of the maintenance messages on the multi-information display, replace the brake fluid every 3 years. Inspect idle speed every 160,000 miles (256,000 km). Adjust the valves during services A, B, 1, 2, or 3 only if they are noisy.
＃
NOTE:
346
Maintenance Sub Items
Rotate tires Replace air cleaner element
If you drive in dusty conditions, replace every 15,000 miles (24,000 km).
Replace dust and pollen filter
If you drive primarily in urban areas that have high concentrations of soot in the air from industry and from diesel-powered vehicles, replace every 15,000
miles (24,000 km).Inspect drive belt Replace transmission fluid Replace spark plugs Inspect valve clearance Replace engine coolant
2010 Insight ０８／１２／２７ １２：１１：４４ ３１ＴＭ８６００ ０３５２
ENGINE OIL FILL CAP
ENGINE OIL DIPSTICK (Orange loop)
Fluid Locations
BRAKE FLUID (Black cap)
AUTOMATIC TRANSMISSION (CVT) FLUID DIPSTICK (Yellow loop)
WASHER FLUID (Blue cap)
ENGINE COOLANT RESERVOIR
RADIATOR CAP
347
2010 Insight ０８／１２／２７ １２：１１：４９ ３１ＴＭ８６００ ０３５３
Reinstall the engine oil fill cap, and tighten it securely. Wait a few minutes, and recheck the oil level on the engine oil dipstick. Do not fill above the upper mark; you could damage the engine.
Recommended Engine Oil Oil is a major contributor to your engine’s performance and longevity. Always use a premium-grade 0W-20
detergent oil displaying the API Certification Seal. This seal indicates the oil is energy conserving, and that it meets the American Petroleum Institute’s latest requirements.Adding Engine Oil
ENGINE OIL FILL CAP
Unscrew and remove the engine oil fill cap on the valve cover. Pour the oil slowly and carefully so you do not spill any. Clean up any spills immediately. Spilled oil could damage components in the engine compartment.
348
2010 Insight ０８／１２／２７ １２：１１：５７ ３１ＴＭ８６００ ０３５４
API CERTIFICATION SEAL
The oil viscosity or weight is provided on the container’s label.
Honda Motor Oil is the preferred 0W-20 lubricant for your vehicle. It is highly recommended that you use Honda Motor Oil in your vehicle for optimum engine protection. Make sure the API Certification Seal says ‘‘For Gasoline Engines’’.
Ambient Temperature
A very low-viscosity, fuel-efficient 0W-20 oil is the engine lubricant for your Insight. This special oil is formulated to help your engine use less fuel.
Adding Engine Oil
Synthetic Oil You may use a synthetic motor oil if it meets the same requirements given for a conventional motor oil: it displays the API Certification Seal and it is the proper weight. You must follow the oil and filter change intervals shown on the multi- information display.
Engine Oil Additives Your vehicle does not require any oil additives. Additives may adversely affect the engine or transmission performance and durability.
349
2010 Insight ０８／１２／２７ １２：１２：０４ ３１ＴＭ８６００ ０３５５
Changing the Oil and Filter
Always change the oil and filter according to the maintenance messages shown on the multi- information display. The oil and filter collect contaminants that can damage your engine if they are not removed regularly.
Changing the oil and filter requires special tools and access from underneath the vehicle. The vehicle should be raised on a service station- type hydraulic lift for this service. Unless you have the knowledge and proper equipment, you should have this maintenance done by a skilled mechanic.
1.
Run the engine until it reaches normal operating temperature, then shut it off.
2.
Open the hood, and remove the engine oil fill cap.
SCREW
SCREWS CLIP
3.
Remove the screws with a Phillips- head screwdriver, and clips with a flat-tipped screwdriver, then pull the under-cover down.
350
2010 Insight ０８／１２／２７ １２：１２：１４ ３１ＴＭ８６００ ０３５６
BOLT
WASHER
OIL FILTER
4.
Remove the oil drain bolt and washer from the bottom of the engine. Drain the oil into an appropriate container.
5.
Remove the oil filter, and let the remaining oil drain. A special wrench (available from your dealer) is required.
Make sure the oil filter gasket is not stuck to the contacting surface of the engine. If it is, remove it before installing a new oil filter.
Changing the Oil and Filter
6.
Install a new oil filter according to the instructions that come with it. Make sure to clean off any dirt and dust on the contacting surface of a new oil filter.
7.
Put a new washer on the drain bolt, then reinstall the drain bolt. Tighten the drain bolt to:
29 lbf·ft (39 N·m , 4.0 kgf·m)
8.
Refill the engine with the recommended oil.
Engine oil change capacity (including filter):
3.4 US qt (3.2 )
CONTINUED
351
2010 Insight ０８／１２／２７ １２：１２：２０ ３１ＴＭ８６００ ０３５７
Changing the Oil and Filter
9.
Reinstall the engine oil fill cap. Start the engine. The oil pressure indicator should go out within 5
seconds. If it does not, turn off the engine, and check your work.10.
Let the engine run for several minutes, then check the drain bolt and oil filter for leaks.
11.
Turn off the engine, let it sit for several minutes, then check the oil level on the dipstick. If necessary, add more oil.
12.
Put the under-cover back in place and reinstall the holding clips and screws. Lock the clips securely by pushing on the center of each clip.
Improper disposal of engine oil can be harmf ul to the environment. If you change your own oil, please dispose of the used oil properly. Put it in a sealed container and take it to a recycling center. Do not discard it in a trash bin or dump it on the ground.
352
2010 Insight ０８／１２／２７ １２：１２：２６ ３１ＴＭ８６００ ０３５８
Engine Coolant
Adding Engine Coolant
RESERVE TANK
If the coolant level in the reserve tank is at or below the MIN line, add coolant to bring it up to between the MIN and MAX lines. Inspect the cooling system for leaks.
Always use Honda Long-life Anti- freeze/Coolant Type 2. This coolant is pre-mixed with 50 percent antifreeze and 50 percent distilled water. Never add straight antifreeze or plain water.
If Honda antifreeze/coolant is not available, you may use another major-brand non-silicate coolant as a temporary replacement. Make sure it is a high-quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Have the cooling system flushed and refilled with Honda antifreeze/coolant as soon as possible.
If you regularly drive your vehicle under severe conditions in very low temperature (under 35°C), a higher concentration of coolant should be used. Consult your Honda dealer f or more inf ormation on the proper coolant.
31°F,
−
−
CONTINUED
353
2010 Insight ０８／１２／２７ １２：１２：３５ ３１ＴＭ８６００ ０３５９
Engine Coolant
If the reserve tank is completely empty, you should also check the coolant level in the radiator.
Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.
Always let the engine and radiator cool down before removing the radiator cap.
354
4.
The coolant level should be up to the base of the filler neck. Add coolant if it is low.
Pour the coolant slowly and carefully so you do not spill any. Clean up any spill immediately; it could damage components in the engine compartment.
5.
Put the radiator cap back on, and tighten it fully.
6.
Pour coolant into the reserve tank. Fill it to halfway between the MAX and MIN marks. Put the cap back on the reserve tank.
Do not add any rust inhibitors or other additives to your vehicle’s cooling system. They may not be compatible with the coolant or engine components.
RADIATOR CAP
1.
Make sure the engine and radiator are cool.
2.
Relieve any pressure in the cooling system by turning the radiator cap counterclockwise, without pressing down.
3.
Remove the radiator cap by pushing down and turning counterclockwise.
2010 Insight ０８／１２／２７ １２：１２：４２ ３１ＴＭ８６００ ０３６０
Check the fluid level in the windshield washer reservoir at least monthly during normal use.
OnU.S.models Check the fluid level by removing the cap and looking at the level gauge.
OnallCanadianmodels If the washer fluid is low, a ‘‘WASHER FLUID LOW’’ message appears on the multi-information display.
Fill the reservoir with a good-quality windshield washer fluid. This increases the cleaning capability and prevents freezing in cold weather.
When you refill the reservoir, clean the edges of the windshield wiper blades with windshield washer fluid on a clean cloth. This will help to condition them.
Windshield Washers
Do not use engine antif reeze or a vinegar/water solution in the windshield washer reservoir. Antif reeze can damage your vehicle’s paint, while a vinegar/water solution can damage the windshield washer pump. Use only commercially-available windshield washer f luid.
355
2010 Insight ０８／１２／２７ １２：１２：５２ ３１ＴＭ８６００ ０３６１
Automatic Transmission Fluid
Continuously Variable Transmission (CVT)
2.
3.
Remove the dipstick (yellow loop) from the transmission, and wipe it with a clean cloth.
Insert the dipstick all the way into the transmission securely as shown in the illustration.
DIPSTICK
Check the fluid level with the engine at normal operating temperature.
1.
Park the vehicle on level ground. Start the engine, let it run until the radiator fan comes on, then shut off the engine. For accurate results, wait about 60 seconds (but no longer than 90 seconds) before doing step 2.
356
HOT Range
UPPER MARK LOWER MARK
4.
Remove the dipstick and check the fluid level. There is a HOT side and a COLD side on the dipstick. The fluid level should be between the upper and lower marks on the HOT side.
5.
If the level is below the lower mark, add fluid into the dipstick hole to bring it to the level between the upper and lower marks.
Pour the fluid slowly and carefully so you do not spill any. Clean up any spill immediately; it could damage components in the engine compartment.
Always use Honda CVTF (Continuously Variable Transmission Fluid).
2010 Insight ０８／１２／２７ １２：１３：０１ ３１ＴＭ８６００ ０３６２
Automatic Transmission Fluid, Brake Fluid
6.
Insert the dipstick all the way back into the transmission securely.
The transmission should be drained and refilled with new fluid when this service is indicated by a maintenance message on the multi-information display.
If you are not sure how to add fluid, contact your dealer.
Brake Fluid Check the brake fluid level in the reservoirs monthly.
You will also see the ‘‘BRAKE FLUID LOW’’ message on the multi- information display when the brake fluid level is low.
Replace the brake fluid when this service is indicated by a maintenance message on the multi-information display.
Always use Honda Heavy Duty Brake Fluid DOT 3. If it is not available, you should use only DOT 3
or DOT 4 fluid, from a sealed container, as a temporary replacement.Using any non-Honda brake fluid can cause corrosion and decrease the life of the system. Have the brake system flushed and refilled with Honda Heavy Duty Brake Fluid DOT 3 as soon as possible.
Brake fluid marked DOT 5 is not compatible with your vehicle’s braking system and can cause extensive damage.
CONTINUED
357
2010 Insight ０８／１２／２７ １２：１３：０４ ３１ＴＭ８６００ ０３６３
Brake Fluid
MAX
MIN
The fluid level should be between the MIN and MAX marks on the side of the reservoir. If the level is at or below the MIN mark, your brake system needs attention. Have the brake system inspected for leaks or worn brake pads.
358
2010 Insight ０８／１２／２７ １２：１３：１４ ３１ＴＭ８６００ ０３６４
Headlight Aiming The headlights were properly aimed when your vehicle was new. If you regularly carry heavy items in the cargo area, readjustment may be required. Adjustments should be done by your dealer or another qualified technician.
Replacing a Headlight Bulb Your vehicle has halogen headlight bulbs. When replacing a bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.
Halogen headlight bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.
HighBeamHeadlight
HOLDING CLIP
Lights
CONNECTOR
1.
Open the hood. To change the bulb on the right side, remove the upper part of the windshield washer reservoir tank. Use a flat-tipped screwdriver to remove the holding clip, then remove the upper part by pulling it straight up.
2.
Remove the electrical connector from the cover by pushing on the tab to unlock it, then slide the connector off the cover.
3.
Remove the cover on the back of the headlight assembly by turning it counterclockwise.
CONTINUED
359
2010 Insight ０８／１２／２７ １２：１３：２１ ３１ＴＭ８６００ ０３６５
Lights
CONNECTOR
BULB
COVER
4.
Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.
5.
Remove the bulb from the headlight assembly by turning it one-quarter turn counterclockwise.
360
6.
7.
8.
Install the new bulb, and turn it one-quarter turn clockwise to lock it in place.
Push the electrical connector back onto the bulb. Make sure it is on all the way.
Reinstall the cover over the back of the headlight assembly and turn it clockwise to lock it in place. Push the electrical connector back onto the cover.
9.
Turn on the headlights to test the new bulb.
2010 Insight ０８／１２／２７ １２：１３：３０ ３１ＴＭ８６００ ０３６６
10.
(Right side) Install the upper part of the windshield washer reservoir tank in the reverse order of removal.
LowBeamHeadlight
BULB
CONNECTOR
1.
Open the hood.
2.
Remove the electrical connector from the bulb by pushing on the tab and pulling the connector down.
3.
Remove the bulb from the headlight assembly by turning it one-quarter turn counterclockwise.
Lights
4.
5.
Install the new bulb, and turn it one-quarter turn clockwise to lock it in place.
Push the electrical connector back onto the bulb. Make sure it is on all the way.
6.
Turn on the headlights to test the new bulb.
361
2010 Insight ０８／１２／２７ １２：１３：３９ ３１ＴＭ８６００ ０３６７
Lights
Replacing a Front Parking Light Bulb
HOLDING CLIP
BULB
1.
Open the hood. To change the bulb on the right side, remove the upper part of the windshield washer reservoir tank. Use a flat-tipped screwdriver to remove the holding clip, then remove the upper part by pulling it straight up.
SOCKET
2.
3.
Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise.
Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms.
362
4.
Install the socket back into the headlight assembly. Turn it clockwise to lock it in place.
5.
Turn on the lights to make sure the new bulb is working.
6.
(Right side) Install the upper part of the windshield washer reservoir tank in the reverse order of removal.
2010 Insight ０８／１２／２７ １２：１３：４８ ３１ＴＭ８６００ ０３６８
Replacing the Front Turn Signal Light Bulb
NOTCH
TAB
BULB
GARNISH
BOLT
1.
Place a cloth on the edge of the light assembly garnish. Remove the cover by carefully prying in the notch on its left edge with a flat-tipped screwdriver.
2.
3.
Remove the bolt and pull the front turn light assembly from the bumper while taking the tab out from the holder.
Remove the socket from the front turn signal light assembly by turning it one-quarter turn counterclockwise.
Lights
4.
5.
Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms.
Insert the socket back into the front turn signal light assembly. Turn it clockwise to lock it in place.
6.
Turn on the lights to make sure the new bulb is working.
7.
Install the light assembly in the reverse order of removal. Make sure to secure the bolt.
8.
Install the garnish in the original position securely.
363
2010 Insight ０８／１２／２７ １２：１３：５５ ３１ＴＭ８６００ ０３６９
3.
4.
Pull the bulb straight out of its socket. Push the new bulb straight into the socket until it bottoms.
Install the socket back into the headlight assembly. Turn it clockwise to lock it in place.
5.
Turn on the lights to make sure the new bulb is working.
Lights
Replacing a Front Side Marker Light Bulb
BULB
SOCKET
1.
Open the hood.
2.
Remove the socket from the headlight assembly by turning it one-quarter turn counterclockwise.
364
2010 Insight ０８／１２／２７ １２：１４：０３ ３１ＴＭ８６００ ０３７０
Replacing the Rear Bulbs
HOOKS
TRIM
HOOKS
Lights
CLIP
CLIP
1.
Open the hatch.
2.
Push on the area of the trim as shown in the illustration above to detach the upper hooks from the light assembly.
3.
Pry on the gap between the trim and light assembly carefully with a flat-tipped screwdriver to detach the lower hooks.
4.
Make sure that all hooks are removed from the light assembly. Unclip the top half of the trim from the body by pulling it out. Then unclip the bottom half.
CONTINUED
365
2010 Insight ０８／１２／２７ １２：１４：１２ ３１ＴＭ８６００ ０３７１
Lights
BOLT
Front
Left side
Front
ORIGINAL POSITION
Left side
SOCKET
SNAP FASTENERS
BULB
5.
Remove the two mounting bolts with an 8 mm wrench.
6.
), then push the
Pull the rear of the light assembly out as shown in the illustration above ( assembly back to the original position carefully ( part of the rear light assembly raises slightly (
). The front
).
7.
Determine which of the three bulbs is burned out: back-up light, turn signal, or side marker.
366
8.
Pull the whole light assembly outwards from the body carefully.
9.
Remove the socket by turning it one-quarter turn counterclockwise.
10.
Remove the burned out bulb by pulling it straight out of its socket.
2010 Insight ０８／１２／２７ １２：１４：２０ ３１ＴＭ８６００ ０３７２
Lights
11.
Install the new bulb in the socket by pushing it straight in the socket until it bottoms.
12.
Reinstall the socket into the light assembly. Turn it clockwise to lock it in place.
13.
Test the lights to make sure the new bulb is working.
14.
When reinstalling the taillight assembly, align and pop the snap fasteners in place. Reinstall and tighten the two mounting bolts.
15.
To reinstall the trim, set the bottom edge of the trim in the original position and push the bottom half of the trim to clip it back securely. Then push the upper half of the trim to secure the top clip.
16.
Secure the hooks by pushing on the areas of the trim as shown in the illustration above.
367
2010 Insight ０８／１２／２７ １２：１４：２５ ３１ＴＭ８６００ ０３７３
Lights
Side Turn Signal Lights EXmodels Each outside mirror has side turn signal lights. The lights should be replaced by your dealer.
Rear License Plate Light Bulbs The license plate has two lights above it. The bulbs should be replaced by your dealer.
High-mount Brake Light The high-mount brake light should be replaced by your dealer.
368
2010 Insight ０８／１２／２７ １２：１４：３５ ３１ＴＭ８６００ ０３７４
Roof Antenna, Cleaning the Seat Belts, Floor Mats
Roof Antenna
Cleaning the Seat Belts
Floor Mats
LOOP
Before using an automatic car wash, remove the radio antenna so it does not get damaged. Remove the antenna by unscrewing it. When you reinstall the antenna, tighten it securely.
Before entering or parking in areas with low ceiling height, remove the antenna.
If your seat belts get dirty, use a soft brush with a mixture of mild soap and warm water to clean them. Do not use bleach, dye, or cleaning solvents. Let the belts air dry before you use the vehicle. Dirt build-up in the loops of the seat belt anchors can cause the belts to retract slowly. Wipe the insides of the loops with a clean cloth dampened in mild soap and warm water or isopropyl alcohol.
To unlock
Driver’s floor mat is shown.
OnallCanadianmodels The driver’s floor mat that came with your vehicle hooks over the floor mat anchors. To lock each anchor, turn the knob clockwise. This keeps the floor mat from sliding forward and possibly interfering with the pedals.
When cleaning or replacing, turn the knob counterclockwise to unhook the floor mat.
CONTINUED
369
2010 Insight ０８／１２／２７ １２：１４：４１ ３１ＴＭ８６００ ０３７５
Floor Mats, Dust and Pollen Filter, Wiper Blades
If you remove a floor mat, make sure to re-anchor it when you put it back in your vehicle.
If you use a non-Honda floor mat, make sure it fits properly and that it can be used with the floor mat anchors. Do not put additional floor mats on top of the anchored mats.
Make sure the rear floor mats are properly positioned. If not, the floor mat will interfere with the seat operation and make the front passenger’s weight sensors ineffective.
Dust and Pollen Filter This filter removes the dust and pollen that is brought in from the outside through the climate control system.
Have your dealer replace the filter when this service is indicated by a maintenance message on the multi- information display. It should be replaced every 15,000 miles (24,000
km) if you drive primarily in urban areas that have high concentrations of soot in the air, or if the flow from the climate control system becomes less than usual.Wiper Blades Check the condition of the wiper blades at least every 6 months. Replace them if you find signs of cracking in the rubber, and areas that are getting hard or if they leave streaks and unwiped areas when used.
370
2010 Insight ０８／１２／２７ １２：１４：５０ ３１ＴＭ８６００ ０３７６
WIPER ARMS
LOCK TAB
To replace a wiper blade:
1.
Raise each wiper arm off the windshield, lifting the driver’s side first, then the passenger’s side.
2.
Disconnect the blade assembly from the wiper arm:
Put a cloth on the edge of the lock tab, then push up on the lock tab carefully with a flat- tipped screwdriver.
Do not open the hood when the wiper arms are raised, or you will damage the hood and wiper arms.
Wiper Blades
WIPER ARM
Pivot the blade assembly toward the wiper arm until it releases from the wiper arm.
When replacing a wiper blade, make sure not to drop the wiper blade or wiper arm down on the windshield.
CONTINUED
371
2010 Insight ０８／１２／２７ １２：１４：５７ ３１ＴＭ８６００ ０３７７
Wiper Blades
BLADE
4.
Examine the new wiper blades. If they have no plastic or metal reinforcement along the back edge, remove the metal reinforcement strips from the old wiper blade, and install them in the slots along the edge of the new blade.
BLADE
3.
Remove the blade from its holder by grabbing the tabbed end of the blade. Pull firmly until the tabs come out of the holder.
5.
Place the top of the wiper blade on the end of the blade assembly, and slide the blade onto the assembly. Make sure the blade is completely installed.
REINFORCEMENT
Make sure the two rubber tabs inside the blade fit to each notch of the reinforcement, as shown.
372
2010 Insight ０８／１２／２７ １２：１５：０６ ３１ＴＭ８６００ ０３７８
6.
7.
8.
Slide the wiper blade assembly onto the wiper arm. Make sure it locks in place.
REAR
Make sure the blade is completely installed and that its edge is not bunched up.
Lower the wiper arm down against the windshield, the passenger’s side first, then the driver’s side.
Wiper Blades
To replace a rear wiper blade:
1.
Raise the wiper arm off the rear window.
2.
Disconnect the blade assembly from the wiper arm by pivoting the blade assembly upward.
CONTINUED
373
2010 Insight ０８／１２／２７ １２：１５：１４ ３１ＴＭ８６００ ０３７９
Wiper Blades
BLADE
3.
Pull one end of the blade out from the holder. Slide the blade out of the holder.
REINFORCEMENT
4.
Examine the new wiper blades. If they have no plastic or metal reinforcement along the back edge, remove the metal reinforcement strips from the old wiper blade, and install them in the slots along the edge of the new blade.
374
5.
Slide the new blade into the holder. Make sure it is engaged in the slot along its full length. Insert both ends of the blade into the holder. Make sure they are secure.
6.
Install the wiper blade assembly onto the wiper arm. Make sure it locks in place.
7.
Lower the wiper arm against the windshield.
2010 Insight ０８／１２／２７ １２：１５：２５ ３１ＴＭ８６００ ０３８０
Tires To safely operate your vehicle, your tires must be the proper type and size, in good condition with adequate tread, and correctly inflated.
Inflation Guidelines Keeping the tires properly inflated provides the best combination of handling, tread life, and riding comfort.
The following pages give more detailed information on how to take care of your tires and what to do when they need to be replaced.
Using tires that are excessively worn or improperly inflated can cause a crash in which you can be seriously hurt or killed.
Follow all instructions in this owner’s manual regarding tire inflation and maintenance.
Underinflated tires wear unevenly, adversely affect handling and fuel economy, and are more likely to fail from being overheated. Overinflated tires can make your vehicle ride more harshly, are more prone to damage from road hazards, and wear unevenly.
OnU.S.models
