Download PDF Manual


Disc Player Error Messages (Models without navigation system)


Error


Message


UNSUPPORTED


Cause


Track/File format not supported


BAD DISC


PLEASE CHECK


OWNERS MANUAL


PUSH EJECT


CHECK DISC


Mechanical Error


FOCUS Error


TOC Error


Solution


Current track will be skipped. The next supported track or file plays automatically. Press the EJECT button and pull out the disc. Check the disc for serious damage, signs of deformation, excessive scratches, and/or dirt (see page 249). Insert the disc again. If the code does not disappear, or the disc cannot be removed, consult your dealer. Do not try to force the disc out of the player. Press the EJECT button and pull out the disc. Check if it is inserted correctly in the disc player. Make sure the disc is not scratched or damaged. For more information, see page 249.


The chart on the right explains the error messages you may see in the display while playing a disc.


If you see an error message in the display while playing a disc, press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again. For the additional information on damaged discs, see page


249


The audio system will try to play the disc. If there is still a problem, the error message will reappear. Press the eject button, and pull out the disc.


Insert a different disc. If the new disc plays, there is a problem with the first disc. If the error message cycle repeats and you cannot clear it, take your vehicle to a dealer.


180


2010 Insight 09/01/07 16:00:52 31TM8600 0186 


Playing an iPod (Models without navigation system)


EX model


iPod INDICATOR


USB INDICATOR


BUTTON


AUX BUTTON


BUTTON


TITLE BUTTON


RDM BUTTON


RPT BUTTON


181


SEEK (SKIP BUTTON



SEEK (SKIP BUTTON



BUTTON


2010 Insight 09/01/07 16:01:01 31TM8600 0187 


Playing an iPod (Models without navigation system)


iPods compatible with your audio system using the USB adapter cable are:


NOTE:


Do not connect your iPod using a hub.


Do not keep the iPod in the vehicle. Direct sunlight and high heat will damage it.


Do not use an extension cable between the USB adapter cable equipped with your vehicle and your dock connector.


We recommend backing up your data before playing it.


Model


Software


iPod Classic 5 Gen. th (2005 or later) iPod Classic (2007 or later) iPod nano iPod nano 2
generation iPod nano 3
generation iPod touch iPhone


nd


rd


Ver. 1.2 or more


Ver. 1.0 or more


Ver. 1.2 or more Ver. 1.1.2 or more


Ver. 1.0 or more


Ver. 1.1.1 or more Ver. 1.1.1 or more


Use only compatible iPods with the latest software. iPods that are not compatible will not work in this audio unit.


To Play an iPod EXmodel This audio system can play the audio files on the iPod with the same controls used for the in-dash disc player. To play an iPod, connect it to the USB adapter cable in the console compartment by using your dock connector, then press the AUX button. The ignition switch must be in the ACCESSORY (I) or ON (II) position. The iPod will also be recharged with the ignition switch in these positions.


The system will only play songs stored on the iPod with iTunes.


iPod and iTunes are registered trademarks owned by Apple Inc.


182


2010 Insight 08/12/27 11:50:18 31TM8600 0188 


Playing an iPod (Models without navigation system)


ConnectinganiPod


USB CONNECTOR


USB ADAPTER CABLE


USB ADAPTER CABLE


1.


Unclip the USB connector by pivoting it, and pull out the USB adapter cable in the console compartment.


DOCK CONNECTOR


2.


Connect your dock connector to the iPod correctly and securely.


3.


Install the dock connector to the USB adapter cable securely.


If the iPod indicator does not appear in the audio display, check the connections, and try to reconnect the iPod a few times.


If the audio system still does not recognize the iPod, the iPod may need to be reset. Follow the instructions that came with your iPod, or you can find reset instructions online at ipod.


www.apple.com/


CONTINUED


183


2010 Insight 08/12/27 11:50:26 31TM8600 0189 


Playing an iPod (Models without navigation system)


TextDataDisplayFunction Each time you press the TITLE button the display mode switches between the album name, the song name, the artist name, or name off (which turns off the text display).


The display shows up to 16
characters of the selected data. If the text data has more than 16
characters, you will see the first 15
characters and the indicator in the display. Press and hold the TITLE button until the next 16
characters are shown.



ToChangeorSelectFiles Use the SKIP button while an iPod is playing to change files.


SKIP


− (SKIP


Each time you press the



) button, the system


skips forward to the beginning of the next file. Press the (SKIP button, to skip backward to the beginning of the current file. Press it again to skip to the beginning of the previous file.



To move rapidly within a file, press and hold either side ( of the SKIP button.


or


184


2010 Insight 08/12/27 11:50:35 31TM8600 0190 


Playing an iPod (Models without navigation system)


The display shows items on the selected list. Turn the VOL/ SELECT knob to select an item, then press the VOL/SELECT knob to set your selection.


If you select ‘‘ALL,’’ all available files on the selected list are played.


Pressing the button goes back to the previous display and pressing the TITLE button cancels this setting mode.


Press the VOL/ SELECT knob.


You can also select a file from any list on the iPod menu: playlists, artists, albums and songs, by using the VOL/SELECT knob. Push the VOL/SELECT knob to switch the display to an iPod menu, then turn the VOL/SELECT knob to select a desired list. Press the VOL/SELECT knob to set your selection.


ToSelectRepeatorShuffleMode: You can select any type of repeat and shuffle mode by using the RPT button or the RDM button.



This feature


REPEAT continuously plays a file. To activate the repeat feature, press the RPT button. You will see ‘‘RPT’’ in the display. To turn it off, press the RPT button again.



This feature


SHUFFLE ALL plays all available files in a selected list (playlists, artists, albums or songs) in random order. To activate the shuffle all feature, press the RDM button. You will see ‘‘RDM’’ in the display. To turn it off, press and hold the RDM button.


CONTINUED


185


2010 Insight 08/12/27 11:50:43 31TM8600 0191 


Playing an iPod (Models without navigation system)


To Stop Playing Your iPod To play the radio when an iPod is playing, press the FM/AM button. If a disc is in the audio unit, press the CD button to play the disc.



DisconnectinganiPod You can disconnect the iPod at any time when you see the ‘‘OK to disconnect’’ message in the iPod display. Always make sure you see the ‘‘OK to disconnect’’ message in the iPod display before you disconnect it. Make sure to follow the iPod’s instructions on how to disconnect the dock connector from the USB adapter cable.



The displayed message may vary on models or versions. On some models, there is no message to disconnect.



This feature


SHUFFLE ALBUM plays all available albums in a selected list (playlists, artists, albums or songs) in random order. The files in each album are played in the recorded order. To activate the shuffle album feature, press the RDM button repeatedly. You will see ‘‘F-RDM’’ in the display. To turn it off, press and hold the RDM button.


Each time you press the RDM button, the mode changes from shuffle all play to shuffle album play, then to normal play.


186


If you reconnect the same iPod, the system may begin playing where it left off, depending on what mode the iPod is in when it is reconnected.


When you disconnect the iPod while it is playing, the display shows ‘‘USB NO DATA.’’


iPod Error Messages If you see an error message in the display, see page


187


2010 Insight 08/12/27 11:50:48 31TM8600 0192 


If you see an error message on the audio display while playing an iPod, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer.


iPod Error Messages (Models without navigation system)


Cause


USB ROM Error


Error


Message USB ERROR BAD USB DEVICE


PLEASE CHECK


Abnormal power source


OWNERS MANUAL


NO SONG


No files in iPod


UNSUPPORTED


Use of unsupported device


UNSUPPORTED


VER.


Use of unsupported iPod


CONNECT


RETRY


Recognition failure of iPod


Solution


There is problem with the USB adapter unit. Appears when the overcurrent protection feature of the system stops supplying power to USB because an incompatible device is connected. Disconnect the device. Then, turn the audio system off, and turn it on again. Do not reconnect the device that caused the error. Appears when the iPod is empty. Store some files in the iPod. Appears when an unsupported device is connected. Disconnect the device. Appears when an unsupported iPod is connected. See page 182 for the specification information for iPods. If it appears when a supported iPod is connected, update the iPod software to the newer version. Appears when the system dose not acknowledge the iPod. Reconnect the iPod.


187


2010 Insight 09/01/07 16:01:07 31TM8600 0193 


Playing a USB Flash Memory Device (Models without navigation system)


EX model


BUTTON


USB INDICATOR


AUX BUTTON


BUTTON


VOL/SELECT BUTTON


TITLE BUTTON


188


RDM BUTTON


RPT BUTTON


SEEK (SKIP BUTTON



SEEK (SKIP BUTTON



BUTTON


2010 Insight 09/01/07 16:01:18 31TM8600 0194 


Playing a USB Flash Memory Device (Models without navigation system)


To Play a USB Flash Memory Device EXmodel This audio system can operate the audio files on a USB flash memory device with the same controls used for the in-dash disc player. To play a USB flash memory device, connect it to the USB adapter cable in the console compartment, then press the AUX button.



The audio system reads and plays the audio files on the USB flash memory device in MP3, WMA or AAC formats. Depending on the format, the display shows MP3, WMA or AAC when a USB flash memory device is playing. The USB flash memory device limit is up to 700 folders or up to 65535 files.



Only AAC format files recorded with iTunes are playable on this audio unit.


The recommended USB flash memory devices are 256 MB or higher. Some digital audio players may be compatible as well.


Some USB flash memory devices (such as devices with security lock- out features, etc.) will not work in this audio unit.


NOTE:


Do not use a device such as a card reader or hard drive as the device or your files may be damaged.


Do not connect your USB flash memory device using a hub.


Do not use an extension cable to the USB adapter cable equipped with your vehicle.


Do not keep a USB flash memory device in the vehicle. Direct sunlight and high heat will damage it.


We recommend backing up your data before playing a USB flash memory device.


Depending on the type and number of files, it may take some time before they begin to play.


Depending on the software the files were made with, it may not be possible to play some files, or display some text data.


CONTINUED


189


2010 Insight 08/12/27 11:51:17 31TM8600 0195 


Playing a USB Flash Memory Device (Models without navigation system)


The specifications for compatible WMA files are: −


Sampling frequency: 32/44.1/48 kHz Bitrate: 48 320/VBR kbps (Max 384) Supported standards: WMA version 7/8/9
Partition: Top partition only Maximum layers: 8




− −



The specifications for compatible AAC files are: −


Sampling frequency: 8/11.025/12/16/22.05/24/32/ 44.1/48 kHz Bitrate: 8 320 kbps − Supported standards: MPEG4/AAC LC MPEG2/AAC LC Partition: Top partition only Maximum layers: 8




− −


The specifications for compatible MP3 files are: −


Sampling frequency: 32/44.1/48 kHz (MPEG1) 16/22.05/24 kHz (MPEG2) Bitrate: 32/40/48/56/64/80/96/112/128/ 160/192/224/256/320/VBR kbps (MPEG1) 8/16/24/32/40/48/56/64/80/96/ 112/128/144/160/VBR kbps (MPEG2) Supported standards: MPEG1 Audio Layer3
MPEG2 Audio LSF Layer3
Partition: Top partition only Maximum layers: 8




− −


190


2010 Insight 08/12/27 11:51:24 31TM8600 0196 


Playing a USB Flash Memory Device (Models without navigation system)


ConnectingaUSBFlashMemory Device


USB CONNECTOR


When the USB flash memory device is connected, the USB indicator is shown in the display.


USB ADAPTER CABLE


USB ADAPTER CABLE


1.


Unclip the USB connector by pivoting it, and pull out the USB adapter cable in the console compartment.


2.


Connect the USB flash memory device to the USB connector correctly and securely.


CONTINUED


191


2010 Insight 08/12/27 11:51:34 31TM8600 0197 


Playing a USB Flash Memory Device (Models without navigation system)


ToChangeorSelectFiles Use the SKIP button while a USB flash memory device is playing to change files.


SKIP


− (SKIP


Each time you press the



) button, the system


skips forward to the beginning of the next file. Press the (SKIP button, to skip backward to the beginning of the current file. Press it again to skip to the beginning of the previous file.



To move rapidly within a file, press and hold either side ( of the SKIP button.


or



To


FOLDER SELECTION select a different folder, press the button. button to skip to


Press the the next folder, and press the button to skip to the


button or


beginning of the previous folder.


TextDataDisplayFunction Each time you press the TITLE button, the display mode shows you in sequence, the folder name, the file name, the artist name, the album name, the song name, or name off (which turns off the text display).


The display shows up to 16
characters of the selected data. If the text data has more than 16
characters, you will see the first 15
characters and the indicator in the display. Press and hold the TITLE button until the next 16
characters are shown.



192


2010 Insight 08/12/27 11:51:41 31TM8600 0198 


Playing a USB Flash Memory Device (Models without navigation system)


ToSelectaFilefromFolderandFile Lists


Pressing the button goes back to the previous display and pressing the TITLE button cancels this setting mode.


Folder Selection


Track Selection


Press the VOL/ SELECT knob.


You can also select a folder or file by using the VOL/SELECT knob. Push the VOL/SELECT knob to switch the display to the folder or file list, then turn the VOL/SELECT knob to select a folder or file. Press the VOL/SELECT knob to set your selection.


ToSelectRepeat,RandomorScan Mode: You can select any type of repeat, random and scan modes by using the RPT button, RDM button, or SCAN button.


CONTINUED


193


2010 Insight 08/12/27 11:51:46 31TM8600 0199 


Playing a USB Flash Memory Device (Models without navigation system)



This feature plays all


RANDOM the files in random order. To activate the track random feature, press the RDM button. You will see ‘‘RDM’’ in the display. To turn it off, press and hold the RDM button.



This feature


REPEAT continuously plays a file. To activate the repeat feature, press the RPT button. You will see ‘‘RPT’’ in the display. To turn it off, press and hold the RPT button.



This feature


FOLDER REPEAT replays all the files in the selected folder in the order they are stored. To activate the folder repeat feature, press the RPT button repeatedly. You will see ‘‘F-RPT’’ in the display. To turn it off, press and hold the RPT button.


Each time you press and release the RPT button, the mode changes from file repeat to folder repeat, then to normal play.


194


2010 Insight 08/12/27 11:51:51 31TM8600 0200 


Playing a USB Flash Memory Device (Models without navigation system)



This


FOLDER RANDOM feature plays the files in the selected folder in random order. To activate the folder random feature, press the RDM button repeatedly. You will see ‘‘F-RDM’’ in the display. To turn it off, press and hold the RDM button.


Each time you press the RDM button, the mode changes from track random, play to folder random play, then to normal play.



This feature samples all


SCAN files in the selected folder in the order they are stored. To activate the scan feature, press the SCAN button. You will see ‘‘SCAN’’ in the display. You will get a 10 second sampling of each file in the folder. Press and hold the SCAN button to get out of the scan mode and play the last file sampled.



This feature


FOLDER SCAN samples the first file in each folder in the order they are stored. To activate the folder scan feature, press the SCAN button repeatedly. You will see ‘‘F-SCAN’’ in the display. You will get a 10 second sampling of the first file in each folder. Press and hold the SCAN button to get out of the folder scan mode and play the last file sampled.


Each time you press and release the SCAN button, the mode changes from file scan to folder scan, then to normal play.


195


2010 Insight 08/12/27 11:51:58 31TM8600 0201 


Playing a USB Flash Memory Device (Models without navigation system)


USB Flash Memory Device Error Messages If you see an error message in the display, see page


197


To Stop Playing a USB Flash Memory Device To play the radio when a USB flash memory device is playing, press the FM/AM button. If a disc is in the audio unit, press the CD button to play the disc.


DisconnectingaUSBFlashMemory Device You can disconnect the USB flash memory device at any time even if the USB mode is selected on the audio system. Always follow the USB flash memory device’s instructions when you remove it.


When you disconnect the USB flash memory device while it is playing, the display shows ‘‘USB NO DATA.’’


If you reconnect the same USB flash memory device, the system will begin playing where it left off.


196


2010 Insight 08/12/27 11:52:03 31TM8600 0202 


USB Flash Memory Device Error Messages (Models without navigation system)


If you see an error message on the audio display while playing a USB flash memory device, find the solution in the chart to the right. If you cannot clear the error message, take your vehicle to your dealer.


Cause


USB ROM Error


Error


Message USB ERROR BAD USB DEVICE


PLEASE CHECK


Abnormal power source


OWNERS MANUAL


UNPLAYABLE


Use of unsupported files


FILE


NO SONG


No files in USB flash memory device


UNSUPPORTED


Use of unsupported USB flash memory device


Solution


There is problem with the USB adapter unit. Appears when the overcurrent protection feature of the system stops supplying power to USB because an incompatible device is connected. Disconnect the device. Then, turn the audio system off, and turn it on again. Do not reconnect the device that caused the error. Appears when the files in the USB flash memory device are DRM or an unsupported format. This error message appears for about 3
seconds, then plays the next song. Appears when the USB flash memory device is empty or there are no MP3, WMA, or AAC files in the USB flash memory device. Save some MP3, WMA, or AAC files in the USB flash memory device. Appears when an unsupported device is connected. See page 190 for the specification information for the USB flash memory device. If it appears when the supported device is connected, reconnect the device.


197


2010 Insight 08/12/27 11:52:08 31TM8600 0203 


Playing the AM/FM Radio (Models with navigation system)


POWER/VOLUME KNOB


FM1 ICON


AM ICON


SOUND ICON


FM2 ICON


AUTO SELECT ICON


BACK GROUND ICON


AM/FM BUTTON


AUDIO BUTTON


SCAN BUTTON


198


TUNE BAR


PRESET BUTTONS


2010 Insight 08/12/27 11:52:16 31TM8600 0204 


Playing the AM/FM Radio (Models with navigation system)


Voice Control System In addition to the standard audio controls, the audio system in your vehicle can be operated using the voice control system. See the Navigation System Manual for complete details.


To Play the AM/FM Radio Turn the system on by pushing the power/volume knob or the AM/FM button. Adjust the volume by turning the power/volume knob.


Pushing the AUDIO button will also turn on the system.


You can also operate the audio system without using the control icons on the audio screen. Use the control buttons on the left side of the screen. The status bar appears on the bottom of the screen each time you operate any of the control buttons. On the navigation screen, you can also see audio information by touching the AUDIO INFO icon on the lower half of the screen.


The band and frequency that the radio was last tuned to are displayed. To change bands, press the AM/FM button, or touch the desired band icon (FM1, FM2, or AM). On the FM band, STEREO will be displayed if the station is broadcasting in stereo. Stereo reproduction on AM is not available.


To Select a Station You can use any of five methods to find radio stations on the selected band: tune, seek, scan, the preset buttons, and auto select.



Use the TUNE bar to tune


TUNE the radio to a desired frequency. Press the side of the bar to tune to a higher frequency, and press the




side to tune to a lower


frequency.


or


▲ ▼


Press and hold the side of the TUNE bar until you hear two beeps to change the frequency rapidly. Release the bar when the display reaches the desired frequency.


CONTINUED


199


2010 Insight 08/12/27 11:52:25 31TM8600 0205 


Playing the AM/FM Radio (Models with navigation system)



Each preset button can


Preset store one frequency on AM and two frequencies on FM.


Each preset button’s frequency is shown on the bottom of the audio display.


1.


Select the desired band, AM or FM.


2.


Use the tune, seek, or scan function to tune the radio to a desired station.


3.


Pick a preset button, and hold it until you hear a beep.


4.


Repeat steps 1 through 3 to store a total of six stations on AM and twelve stations on FM.



The seek function


SEEK searches up and down from the current frequency to find a station with a strong signal. To activate it, press and hold the side of the TUNE bar until you hear a beep, then release it.


▲ ▼


or



SCAN The scan function samples all stations with strong signals on the selected band. To activate it, press the SCAN button, then release it. You will see SCAN in the display. When the system finds a strong signal, it will stop and play that station for about 10 seconds.


If you do nothing, the system will then scan for the next strong station and play it for 10 seconds. When it plays a station you want to listen to, press the SCAN button again.


200


2010 Insight 08/12/27 11:52:33 31TM8600 0206 


Playing the AM/FM Radio (Models with navigation system)


− If you are


AUTO SELECT traveling and can no longer receive your preset stations, you can use the auto select feature to find stations in the local area.


Press the AUDIO button to view the audio control icons, then touch the AUTO SEL icon. You will see AUTO SEL flashes in the display, and the system goes into scan mode for several seconds. It stores the frequencies of six AM, and twelve FM stations in the preset buttons.


You will see ‘‘0’’ displayed after pressing a preset button if auto select cannot find a strong station for every preset button.


If you do not like the stations auto select has stored, you can store other frequencies on the preset buttons as previously described.


ToturnoffAutoSelect, AUTO SEL icon. This restores the presets you originally set.


touch the


For information on FM/AM radio frequencies and reception, see page 246


Adjusting the Sound


SOUND ICON


You can adjust the sound on the navigation screen. To adjust the sound, push the AUDIO button, then enter the sound grid by touching the SOUND icon on the display.


CONTINUED


201


2010 Insight 08/12/27 11:52:42 31TM8600 0207 


Playing the AM/FM Radio (Models with navigation system)


SPEAKER SETTING



FADER Adjusts the front-to-back strength of the sound. To adjust the front/rear fader, touch the FR or RR icon.



Adjusts the side-to-


BALANCE side strength of the sound. To adjust the left/right balance, touch the L or R icon.


BASS/TREBLE SETTING


The right upper display shows you the current setting of the sound strength coming from each speaker.


BASS



Adjusts the bass.



Adjusts the treble. To


TREBLE adjust the treble and bass, touch either bass adjustment bar. The adjustment bar on the lower right display shows you the current setting.


on the treble or


or



The SVC mode


SVC (speed-sensitive volume compensation) controls the volume based on vehicle speed. The faster you go, the louder the audio volume becomes. As you slow down, the audio volume decreases. Touch the appropriate icon (Low, Mid, Hi, Off) to select the mode.


202


This function is set to MID as the default setting when the vehicle leaves the factory. If you feel the sound is too loud, choose low. If you feel the sound is too quiet, choose Hi.


You can also select the icon with the joystick. Move it up and down to move the highlighting and scroll through lists. Select the icon, then enter the joystick.


The system will return to the audio display about 10 seconds after you stop adjusting a mode.


2010 Insight 08/12/27 11:52:46 31TM8600 0208 


Playing the AM/FM Radio (Models with navigation system)


ScreenMode You can select the background screen to display the sound level. There are three screen modes: level (the sound level is shown with the vertical bars), spectrum analysis (the sound level appears as ripples of water), and off. Each time you touch the background icon, the display changes.


Audio System Lighting You can use the instrument panel brightness control knob to adjust the illumination of the control panel (see page illuminates when the parking lights are on, even if the radio is turned off.


). The audio system


121


203


2010 Insight 08/12/27 11:52:51 31TM8600 0209 


Playing a Disc (Models with navigation system)


CD ICON


JOYSTICK


RANDOM BUTTON


FAST FORWARD BUTTON


SKIP



BUTTON


REPEAT BUTTON


REWIND BUTTON


SKIP



BUTTON


POWER/VOLUME KNOB


OPEN BUTTON


CD/AUX BUTTON


AUDIO BUTTON


SCAN BUTTON


TUNE BAR


204


2010 Insight 08/12/27 11:52:58 31TM8600 0210 


Playing a Disc (Models with navigation system)


To Play a Disc (In-dash single player) You operate the in-dash disc player with the same controls used for the radio.


Do not use discs with adhesive labels. The label can curl up and cause the disc to jam in the unit.


This audio system can also play CD- Rs and CD-RWs compressed in MP3
or WMA formats. When playing a disc in MP3, you will see ‘‘MP3’’ on the screen. In WMA format, ‘‘WMA’’ will appear on the screen. You can select up to 255 folders and play up to 999 tracks. If the disc has a complex structure, it takes a while to read the disc before the system begins to play it.


If you have a disc that is a combination of CD-DA tracks and MP3/WMA files, you can choose the format to listen to by pressing and holding the CD/AUX button.


Video CDs and DVD discs will not work in this unit.


A disc compressed in AAC format cannot be played in this audio system.


CONTINUED


205


2010 Insight 08/12/27 11:53:07 31TM8600 0211 


Playing a Disc (Models with navigation system)



The specifications for compatible WMA files are: −


Sampling frequency: 32/44.1/48 kHz Bitrate: 48/64/80/96/128/160/192 kbps Compatible with variable bitrate and multi-session Maximum layers (including ROOT): 8 layers




If an MP3 or WMA file is


NOTE: protected by digital rights management (DRM), the audio unit displays FILE ERROR, and then skips to the next file.



The specifications for compatible MP3 files are: −


Sampling frequency: 32/44.1/48 kHz (MPEG1) 16/22.05/24 kHz (MPEG2) Bitrate: 32/40/48/56/64/80/96/112/128/ 160/192/224/256/320 kbps (MPEG1) 8/16/24/32/40/48/56/64/80/96/ 112/128/160 kbps (MPEG2) Compatible with variable bitrate and multi-session Maximum layers (including ROOT): 8 layers




206


2010 Insight 08/12/27 11:53:15 31TM8600 0212 


Playing a Disc (Models with navigation system)


ToLoadaDisc


DISC SLOT


CLOSE BUTTON


OPEN BUTTON


The in-dash disc player is behind the navigation screen. To use the disc player, press the OPEN button beside the screen. The screen folds back, and the disc slot appears.


Insert a disc about halfway into the disc slot. The drive will pull the disc in the rest of the way and begin to play it.


You cannot load and play 3-inch (8-cm) discs in this system.


To return the screen to the upright position, press the CLOSE button on the edge of the screen panel. Do not use the folded screen as a tray. If you put a cup, for example, on the screen, the liquid inside the cup may spill on the screen when you go over a bump.


CONTINUED


207


2010 Insight 08/12/27 11:53:24 31TM8600 0213 


Playing a Disc (Models with navigation system)


ToChangeorSelectTracks/Files


PRESET BUTTON’S FUNCTION


You can also select an icon with the joystick. Move it to left, right, up, or down to change the highlighting and scroll through lists. Then press ENT on the top of the joystick to select the icon.


PRESET BUTTONS


You can use the preset buttons while a disc is playing to select passages and change tracks (files in MP3 or WMA mode). Each preset button’s function is shown on the bottom of the screen.



Each time you press and (preset 6), the player


SKIP release skips forward to the beginning of the next track (file in MP3 or WMA mode). Press and release


(preset 5), to skip backward to


the beginning of the current track. Press it again to skip to the beginning of the previous track.


FF/REW a track/file, press and hold


To move rapidly within



(preset 4) or


(preset 3).


Press the AUDIO button beside the screen to show the audio display and operate the in-dash disc player.


You can also operate the audio system without using the control icons on the audio screen. Press the CD/AUX button. The status bar appears on the bottom of the screen. On the navigation screen, you can see the audio information whenever you touch the AUDIO INFO or TRACK LIST icons on the lower half of the screen.


When playing a CD recorded with text data, the track, album, and artist name are shown on the audio display. When playing a disc in MP3 or WMA, the folder number and name, the file number and name, the artist name, and the elapsed time are shown. The system will continuously play a disc until you change modes. If the disc was not recorded with text data, it will not be displayed.


208


2010 Insight 08/12/27 11:53:30 31TM8600 0214 


Playing a Disc (Models with navigation system)



To


InMP3orWMAmode FOLDER SELECTION select a different folder, press either side of the TUNE bar to move to the beginning of the next folder. Press the side of the TUNE bar to skip to the next folder, and the side to move to the beginning of the current folder. Press it again to skip to the beginning of the previous folder.





TRACK REPEAT (FILE REPEAT) To continuously replay a track (file in MP3 or WMA mode), press and release the RPT button (preset 1). You will see TRACK REPEAT in the display. Press the RPT button again to turn it off.


This feature,



InMP3orWMAmode FOLDER REPEAT when activated, replays all files on the selected folder in the order they are compressed. To activate folder repeat, press and hold the RPT button (preset 1) for 2 seconds. You will see FOLDER REPEAT in the display. The system continuously replays the current folder. Press the RPT button again to turn it off. Selecting a different folder with the TUNE bar also turns off folder repeat.


CONTINUED


209


2010 Insight 08/12/27 11:53:35 31TM8600 0215 


Playing a Disc (Models with navigation system)



This


InMP3orWMAmode FOLDER RANDOM feature, when activated, plays all files in the selected folder in random order, rather than in the order they are compressed. To activate folder random, press and hold the RDM button. You will see FOLDER RANDOM in the display. The system then selects and plays files randomly. This continues until you deactivate folder random by pressing the RDM button again, or if you select a different folder with the TUNE bar.



SCAN (TRACK/FILE SCAN) The scan function samples all tracks (files in MP3 or WMA) in the order they were recorded. To activate scan, press and release the SCAN button. You will see TRACK SCAN in the display. You will get a 10 second sampling of each track/file on the disc. Press the SCAN button to get out of scan mode and play the last track/file sampled.


Pressing either SKIP button (preset 5 or 6) also turns off scan.



TRACK RANDOM (Random within a disc/folder) This feature plays the tracks/files within a disc in random order. To activate track random, press and release the RDM button (preset 2). You will see TRACK RANDOM in the display. Press the RDM button again to return to normal play.


210


2010 Insight 08/12/27 11:53:42 31TM8600 0216 


Playing a Disc (Models with navigation system)


This feature,


InMP3orWMAmode FOLDER SCAN − when activated, samples all the first files in each folder on the disc in order. To activate folder scan, press and hold the SCAN button for 2
seconds. You will see ‘‘FOLDER SCAN’’ in the display.


The system plays the first file in each folder for about 10 seconds. If you do nothing, the system then plays the first file in each folder for 10 seconds each. After playing the first file of the last folder, the system goes to normal play.


Pressing either SKIP button (preset 5 or 6), selecting a different folder with the TUNE bar, or pressing the SCAN button, also turns off folder scan.


UsingaTrackList


FOLDER ICON


TRACK/FILE ICON


FOLDER NUMBER


RETURN ICON


You can also select a track/file directly from a track list on the audio display. Press the AUDIO button to show the audio display, then touch the Track List icon. The track list menu appears on the display.


CONTINUED


211


2010 Insight 08/12/27 11:53:48 31TM8600 0217 


Playing a Disc (Models with navigation system)


When playing a CD recorded with text data, each track name is shown on the audio display. With a disc recorded in MP3 or WMA, the folder number and the location are also displayed.


If the disc was not recorded with text data, only the track number is shown.


Select the desired track/file by touching the icon on the display. The selected icon will be highlighted in blue. The system begins to play the selected track/file. With a disc in MP3 or WMA, touch the folder icon on the upper left of the screen to move to the parent folder. The current folder is highlighted in blue.


or


▲ ▼


To scroll through the display, touch the icon on the side of the screen. To go back to the previous display, touch the Return icon on the screen.


To Stop Playing a Disc To play the radio when a disc is playing, press the AM/FM button or touch the FM1, FM2, or AM icon. If a PC card is in the audio unit, touch the CARD icon to play the PC card. Press the CD/AUX button again or touch the CD icon to switch back to the in-dash disc player.


If you turn the system off while a disc is playing, either with the power/volume knob or by turning off the ignition switch, the disc will stay in the drive. When you turn the system back on, the disc will begin playing where it left off.


212


2010 Insight 08/12/27 11:53:54 31TM8600 0218 


Playing a Disc (Models with navigation system)


Protecting Discs For information on how to handle and protect discs, see page


248


207


RemovingaDisc To remove a disc from the audio unit, fold back the screen by pressing the ). Press OPEN button (see page the disc eject button ( ) to remove the disc. If you eject the disc, but do not remove it from the slot, the system will automatically reload it after 10 seconds and put it in pause mode. To begin playing, press the CD/AUX button.


To return the screen to the upright position, press the CLOSE button.


You cannot close the screen if a disc is partially inserted into its slot.


You can also eject the disc when the ignition switch is off.


213


2010 Insight 08/12/27 11:54:00 31TM8600 0219 


Disc Player Error Messages (Models with navigation system)


Error


Message


Cause


Solution


CHECK DISC


FOCUS Error


MECH ERROR


Mechanical Error


CHECK DISC


Disc Format Error


HEAT ERROR


High Temperature


Press the eject button, and pull out the disc. Check if it is inserted correctly in the disc player. Make sure the disc is not scratched or damaged. Press the eject button, and pull out the disc. Check the disc for damage or deformation. If the disc cannot be pulled out, or the error message does not disappear after the disc is ejected, see your dealer. Press the eject button, and pull out the disc. Check the disc for damage or deformation. Will disappear when the temperature returns to normal.


The chart on the right explains the error messages you may see in the display while playing a disc.


If you see an error message in the display while playing a disc, press the eject button. After ejecting the disc, check it for damage or deformation. If there is no damage, insert the disc again.


The audio system will try to play the disc. If there is still a problem, the error message will reappear. Press the eject button, and pull out the disc.


Insert a different disc. If the new disc plays, there is a problem with the first disc. If the error message cycle repeats and you cannot clear it, take your vehicle to a dealer.


214


2010 Insight 08/12/27 11:54:05 31TM8600 0220 


Playing a PC Card (Models with navigation system)


POWER/VOLUME KNOB


PC CARD ICON


TRACK LIST ICON


OPEN BUTTON


CD/AUX BUTTON


AUDIO BUTTON


SCAN BUTTON


TUNE BAR


JOYSTICK


PLAY MODE ICON


REPEAT BUTTON


REWIND BUTTON


SKIP



BUTTON


RANDOM BUTTON


FAST FORWARD BUTTON


SKIP



BUTTON


215


2010 Insight 08/12/27 11:54:14 31TM8600 0221 


Playing a PC Card (Models with navigation system)


To Play a PC Card You operate the PC card player with the same controls used for the radio and the in-dash disc player. To load or play a card, the ignition switch must be in the ACCESSORY (I) or ON (II) position.


The PC card player reads and plays cards in MP3 or WMA formats. Depending on the format, the screen will indicate ‘‘MP3’’ or ‘‘WMA’’ when a card is playing. The card limit of the player is 255 folders and 999
tracks. If the card has a complex structure, it takes some time for the system to begin playing it.


Based on PCMCIA 2.1/JEIDA 4.2, the recommended PC cards for the PC card reader are:


CompactFlash Flash ATA


SD memory card


Always use the recommended memory card with the appropriate adapter (if an adapter is needed). Some memory cards will not work in this unit.


NOTE:


When you insert a PC card into the slot, make sure you put it in straight. If you cannot insert it, remove it, and insert again.


Do not keep PC cards in the vehicle. Direct sunlight and high heat will damage them.


To avoid damaging the card reader, do not insert hard disc drive cards into the PC card slot.


You cannot close the screen (move it to the upright position) until the PC card is inserted all the way into its slot or removed.


Never insert foreign objects into the PC card slot.


216


2010 Insight 08/12/27 11:54:20 31TM8600 0222 


Playing a PC Card (Models with navigation system)



The specifications for compatible MP3 files are: −


Sampling frequency: 32/44.1/48 kHz (MPEG1), 16/22.05/24 kHz (MPEG2) Bitrate: 32/40/48/56/64/80/96/112/128/ 160/192/224/256/320 kbps (MPEG1), 8/16/24/32/40/48/56/64/80/96/ 112/128/160 kbps (MPEG2) Compatible with variable bitrate and multi-session. Maximum layers (including ROOT): 8 layers





The specifications for compatible WMA files are: −


Sampling frequency: 32/44.1/48 kHz Bitrate: 48/64/80/96/128/160/192 kbps Compatible with variable bitrate and multi-session. Maximum layers (including ROOT): 8 layers




In WMA format, DRM (digital rights management) files cannot be played. If the system finds a DRM file, it skips that file and plays the next available folder or file.


217


2010 Insight 08/12/27 11:54:26 31TM8600 0223 


Playing a PC Card (Models with navigation system)


LoadingaPCCard


PC CARD SLOT


Insert a PC card straight into the slot. The drive will read the PC card and begin to play it.


Press the AUDIO button beside the screen to show the audio display and operate the PC card player.


Return the screen to the upright position by pressing the CLOSE button on the edge of the screen panel.


You can also operate the audio system without using the control icons on the audio screen. Press any of the appropriate control buttons. The status bar appears on the bottom of the screen. On the navigation screen, you can see the audio information whenever you touch the AUDIO INFO icon on the screen.


The PC card slot is behind the navigation screen. To use the PC card player, press the OPEN button beside the screen. The screen folds back, and the PC card slot appears.


218


2010 Insight 08/12/27 11:54:36 31TM8600 0224 


Playing a PC Card (Models with navigation system)


Toselectaplaymode


FOLDER MODE


PLAY MODE ICON


MODE INDICATOR


ARTIST MODE


PLAY MODE ICON


ALBUM MODE


PLAY MODE ICON


There are three play modes: Folder, Artist, and Album. Touch the PLAY MODE icon, then choose one of the modes by touching its icon. When a mode is selected, it is highlighted in blue.


Folder mode plays tracks in the order they were added to the card.


Artist mode plays tracks in alphabetical order, by artist and song title.


Album mode plays albums (folders) in alphabetical order.


If play mode information was not included in the tracks/files when they were added to the card, it will not be displayed on the screen.


MODE INDICATOR


MODE INDICATOR


CONTINUED


219


2010 Insight 08/12/27 11:54:43 31TM8600 0225 


Playing a PC Card (Models with navigation system)


PLAY MODE ICON


To select a play mode, push the AUDIO button to show the audio display, then touch the PLAY MODE icon on the display.


Select the desired mode by touching the appropriate icon, or move the joystick, then press ENT.


After you select the play mode, the display changes to the selectable playing menu. If you select ‘‘Continue playing the current song,’’ the system goes into the selected play mode after playing the current file.


220


2010 Insight 08/12/27 11:54:51 31TM8600 0226 

Loading...
x