Download PDF Manual

■ ABS Helps prevent the wheels from locking up, and helps you retain steering control by pumping the brakes rapidly, much faster than you.


The electronic brake distribution (EBD) system, which is part of the ABS, also balances the front-to-rear braking distribution according to vehicle loading.


You should never pump the brake pedal. Let the ABS work for you by always keeping firm, steady pressure on the brake pedal. This is sometimes referred to as “stomp and steer.”


■ ABS operation The brake pedal may pulsate slightly when the ABS is working. Keep holding the pedal firmly down. On dry pavement, you will need to press on the brake pedal very hard before the ABS activates. However, you may feel the ABS activate immediately if you are trying to stop on snow or ice.


When the vehicle speed goes under 6 mph (10 km/h), the ABS stops.


TOC


Index


Home


210


1ABS (Anti-lock Brake System)


NOTICE The ABS may not function correctly if you use an incorrect tire type and size.


When the ABS indicator comes on while driving, there may be a problem with the system. While normal braking is not affected, there is a possibility of the ABS not operating. Have the vehicle checked by a dealer immediately.


The ABS does not reduce the time or distance it takes to stop the vehicle. It only helps with steering control during hard braking.


In the following cases, your vehicle may need more stopping distance than a vehicle without the ABS: • When driving on rough road surfaces, including


when driving on uneven surfaces, such as gravel or snow.


• When tire chains are installed.


You may hear a motor sound coming from the engine compartment while system checks are being performed immediately after starting the engine or while driving. This is normal.


2013 CR-Z 13 CR-Z-31SZT6200.book 211 ページ 2012年10月25日 木曜日 午後9時9分


QRG


Brake Assist System ■ Brake Assist System Designed to assist the driver by generating greater braking force when you depress the brake pedal hard during emergency braking.


■ Brake assist system operation Press the brake pedal firmly for more powerful braking.


When brake assist operates, the pedal may wiggle slightly and an operating noise may be heard. This is normal. Keep holding the brake pedal firmly down.


uuBrakinguBrake Assist System


TOC


Index


Home


211


2013 CR-Z 13 CR-Z-31SZT6200.book 212 ページ 2012年10月25日 木曜日 午後9時9分


Parking Your Vehicle


QRG


When Stopped 1. Depress the brake pedal firmly.


2. Firmly apply the parking brake.


Automatic transmission (CVT) models 3. Move the shift lever from (D to (P.


Manual transmission models 3. Move the shift lever to (1 or (R.


4. Turn off the engine.


Always set the parking brake firmly, in particular if you are parked on an incline.


TOC


Index


Home


212


1Parking Your Vehicle


Do not park your vehicle near flammable objects, such as dry grass, oil, or timber. Heat from the exhaust can cause a fire.


1When Stopped


Automatic transmission (CVT) models NOTICE The following can damage the transmission: • Depressing the accelerator and brake pedals


simultaneously.


• Holding the vehicle in place when facing uphill by


depressing the accelerator pedal.


• Moving the shift lever into (P before the vehicle


stops completely.


Raise the wiper arms when snow is expected.


2013 CR-Z 13 CR-Z-31SZT6200.book 213 ページ 2012年10月25日 木曜日 午後9時9分


Multi-View Rear Camera


QRG


About Your Multi-View Rear Camera Models with navigation system For models with the navigation system, see the Navigation System Manual.


TOC


Index


Home


1About Your Multi-View Rear Camera


The rear camera view is restricted. You cannot see the corner ends of the bumper or what is underneath the bumper. Its unique lens also makes objects appear closer or farther than they actually are.


Visually confirm that it is safe to drive before backing up. Certain conditions (such as weather, lighting, and high temperatures) may also restrict the rear view. Do not rely in the rearview display which does not give you all information about conditions at the back of your vehicle.


If the camera lens is covered with dirt or moisture, use a soft, moist cloth to keep the lens clean and free of debris.


213


2013 CR-Z 13 CR-Z-31SZT6200.book 214 ページ 2012年10月25日 木曜日 午後9時9分


Rearview Camera


QRG


About Your Rearview Camera


Rearview Camera Display


Models without navigation system An image of the rear view is shown in your vehicle’s rearview mirror when the shift lever is moved to (R.


1About Your Rearview Camera


The rear camera view is restricted. You cannot see the corner ends of the bumper or what is underneath the bumper. Its unique lens also makes objects appear closer or farther than they actually are.


Auto Button


■ Rearview Camera Display Area


Screen display


Guidelines


Bumper


Camera


Approx. 20 in (0.5 m) Approx. 39 in (1 m)


Approx. 79 in (2 m)


Approx. 118 in (3 m)


Visually confirm that it is safe to drive before backing up. Certain conditions (such as weather, lighting, and high temperatures) may also restrict the rear view. Do not rely on the rearview display which does not give you all information about conditions at the back of your vehicle.


If the camera lens is covered with dirt or moisture, use a soft, moist cloth to keep the lens clean and free of debris.


The rearview display is turned on every time you shift to (R.


The rearview mirror gets hot if the rearview display is used for an extended period.


To turn the guidelines on or off, press and hold the auto button for about three seconds. If you turn the guidelines off, they remain off until you turn them back on.


Approx. 118 in (3 m)


Approx. 79 in (2 m) Approx. 39 in (1 m)


The rearview camera has a unique lens that makes objects appear closer or further than they actually are.


TOC


Index


Home


214


2013 CR-Z 13 CR-Z-31SZT6200.book 215 ページ 2012年10月25日 木曜日 午後9時9分


uuRearview CamerauAbout Your Rearview Camera


■ Customizing the Displayed Language You can select the displayed language on the rearview mirror between English, French and Spanish.


1. Move the shift lever to (R to display the


rearview monitor. u Make sure that the automatic dimming


rearview mirror is on.


2. Press and hold the auto button for about six


seconds or more. u The displayed operation guide message


begins blinking.


3. Press the auto button to change the


language while it is blinking. u Pressing the button switches the


displayed language.


u Your selection is set about five seconds


after you stop adjusting.


QRG


TOC


Index


Home


215


2013 CR-Z 13 CR-Z-31SZT6200.book 216 ページ 2012年10月25日 木曜日 午後9時9分


Refueling


QRG


Fuel Information ■ Fuel recommendation Unleaded gasoline, pump octane number 87 or higher Use of a lower octane gasoline can cause a persistent, heavy metallic knocking noise that can lead to engine damage.


■ Top tier detergent gasoline Because the level of detergency and additives in gasoline vary in the market, Honda endorses the use of “TOP TIER Detergent Gasoline” where available to help maintain the performance and reliability of your vehicle. TOP TIER Detergent Gasoline meets a new gasoline standard jointly established by leading automotive manufacturers to meet the needs of today’s advanced engines.


TOC


Index


Home


216


1Fuel Information


NOTICE We recommend quality gasoline containing detergent additives that help prevent fuel system and engine deposits. In addition, in order to maintain good performance, fuel economy, and emissions control, we strongly recommend the use of gasoline that does NOT contain harmful manganese-based fuel additives such as MMT, if such gasoline is available.


Use of gasoline with these additives may adversely affect performance, and cause the malfunction indicator lamp on your instrument panel to come on. If this happens, contact a dealer for service. Some gasoline today is blended with oxygenates such as ethanol. Your vehicle is designed to operate on oxygenated gasoline containing up to 10% ethanol by volume. Do not use gasoline containing methanol. If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline.


2013 CR-Z 13 CR-Z-31SZT6200.book 217 ページ 2012年10月25日 木曜日 午後9時9分


uuRefuelinguHow to Refuel


Qualifying gasoline retailers will, in most cases, identify their gasoline as having met “TOP TIER Detergent Gasoline” standards at the retail location. This fuel is guaranteed to contain the proper level of detergent additives and be free of metallic additives. The proper level of detergent additives, and absence of harmful metallic additives in gasoline, help avoid build-up of deposits in your engine and emission control system.


For further important fuel-related information for your vehicle, or on information on gasoline that does not contain MMT, visit www.hondacars.com. In Canada, visit www.honda.ca for additional information on gasoline. For more information on top tier gasoline, visit www.toptiergas.com.


■ Fuel tank capacity: 10.6 US gal (40 liters)


How to Refuel


Push


Fuel Fill Door


1. Stop your vehicle with the service


station pump on the left side of the vehicle in the rear.


2. Turn off the engine.


3. Press the area indicated by the arrow


to release the fuel fill door. You will hear a click.


QRG


TOC


Index


Home


1How to Refuel


3WARNING


Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.


• Stop the engine, and keep heat, sparks,


and flame away.


• Handle fuel only outdoors. • Wipe up spills immediately.


Continued


217


2013 CR-Z 13 CR-Z-31SZT6200.book 218 ページ 2012年10月25日 木曜日 午後9時9分


uuRefuelinguHow to Refuel


4. Remove the fuel fill cap slowly. If you hear a release of air, wait until this stops, then turn the knob slowly to open the fuel fill cap.


Cap


Holder


Cap


5. Place the fuel fill cap in the holder.


6. Insert the filler nozzle fully.


u When the tank is full, the fuel nozzle will click off automatically. This leaves space in the fuel tank in case the fuel expands with a change in the temperature.


7. After filling, replace the fuel fill cap,


tightening it until you hear it click at least once. u Shut the fuel fill door by hand.


1How to Refuel


The filler nozzle automatically stops to leave space in the fuel tank so that fuel does not overflow as a result of changes in air temperature.


If the fuel nozzle keeps turning off when the tank is not full, there may be a problem with the pump's fuel vapor recovery system. Try filling at another pump. If this does not fix the problem, consult a dealer.


Do not continue to add fuel after the nozzle has automatically stopped. Additional fuel can exceed the full tank capacity.


QRG


TOC


Index


Home


218


2013 CR-Z 13 CR-Z-31SZT6200.book 219 ページ 2012年10月25日 木曜日 午後9時9分


Fuel Economy


QRG


Improving Fuel Economy Fuel economy depends on several conditions, including driving conditions, your driving habits, the condition of your vehicle, and loading. Depending on these and other conditions, you may or may not achieve the rated fuel economy of this vehicle.


■ Maintenance and Fuel Economy You can optimize your fuel economy with proper maintenance of your vehicle. Always maintain your vehicle in accordance with the messages displayed on the multi-information display. • Use the recommended viscosity engine oil, displaying the API Certification Seal.


• Maintain the specified tire pressure.


• Do not load the vehicle with excess cargo.


• Keep your vehicle clean. A buildup of snow or mud on your vehicle's underside


adds weight and increases wind resistance.


TOC


Index


Home


1Improving Fuel Economy


Direct calculation is the recommended method to determine actual fuel consumed while driving.


Miles driven


100


Gallons of


fuel


Liters of


fuel


Miles per


Gallon


Kilometers


L per 100 km


In Canada, posted fuel economy numbers are established following a simulated test. For more information on how this test is performed, please visit http://oee.nrcan.gc.ca/


219


2013 CR-Z 13 CR-Z-31SZT6200.book 220 ページ 2012年10月25日 木曜日 午後9時9分


Accessories and Modifications


QRG


Accessories When installing accessories, check the following: • Do not install accessories on the windshield. They can obstruct your view and


delay your reaction to driving conditions.


• Do not install accessories on the side pillars or across the side windows.


Accessories installed in these areas may interfere with proper operation of the side curtain airbags.


• Be sure electronic accessories do not overload electrical circuits or interfere with


proper operation of your vehicle.


2 Fuses P. 297


• Before installing any electronic accessory, have the installer contact a dealer for


assistance. If possible, have a dealer inspect the final installation.


Modifications Do not modify your vehicle or use non-Honda components that can affect its handling, stability, and reliability.


Overall vehicle performance can be affected. Always make sure all equipment is properly installed and maintained, and that it meets federal, state, province, territory, and local regulations.


TOC


Index


Home


220


1Accessories and Modifications


3WARNING


Improper accessories or modifications can affect your vehicle's handling, stability, and performance, and cause a crash in which you can be seriously hurt or killed.


Follow all instructions in this owner's manual regarding accessories and modifications.


Honda Genuine accessories are recommended to ensure proper operation on your vehicle.


2013 CR-Z 13 CR-Z-31SZT6200.book 221 ページ 2012年10月25日 木曜日 午後9時9分


QRG


Index


Home


Maintenance


This chapter discusses basic maintenance.


Before Performing Maintenance


Inspection and Maintenance ............ 222
Safety When Performing Maintenance.... 223
Parts and Fluids Used in Maintenance Service ........................................... 224
Maintenance Minder™ ...................... 225
Maintenance Under the Hood


Maintenance Items Under the Hood..... 229
Opening the Hood ........................... 230
Recommended Engine Oil ................ 231
Oil Check......................................... 232
Adding Engine Oil............................ 233
Changing the Engine Oil and Oil Filter.. 234


Engine Coolant ................................ 236
Transmission Fluid............................ 238
Brake/Clutch Fluid............................ 240
Refilling Window Washer Fluid......... 241
Replacing Light Bulbs ....................... 242
Checking and Maintaining Wiper Blades .......................................... 250
Checking and Maintaining Tires


Checking Tires ................................. 253
Tire and Loading Information Label .. 254
Tire Labeling .................................... 254
DOT Tire Quality Grading (U.S. Vehicles) .. 256
Wear Indicators................................ 258


Tire Service Life................................ 258
Tire and Wheel Replacement ........... 259
Tire Rotation.................................... 260
Winter Tires ..................................... 261
12 Volt Battery.................................. 262
Remote Transmitter Care


Replacing the Button Battery ........... 263
Climate Control System Maintenance......264
Cleaning


Interior Care .................................... 265
Exterior Care.................................... 267


221


2013 CR-Z 13 CR-Z-31SZT6200.book 222 ページ 2012年10月25日 木曜日 午後9時9分


Before Performing Maintenance


QRG


Inspection and Maintenance For your safety, perform all listed inspections and maintenance to keep your vehicle in good condition. If you become aware of any abnormality (noise, smell, insufficient brake fluid, oil residue on the ground, etc.), have your vehicle inspected by a dealer. (Note, however, that service at a dealer is not mandatory to keep your warranties in effect.) Refer to the separate maintenance booklet for detailed maintenance and inspection information.


■ Types of Inspection and Maintenance ■ Daily inspections Perform inspections before long distance trips, when washing the vehicle, or when refueling.


■ Periodic inspections • Check the continuously variable transmission fluid level monthly.


2 Continuously Variable Transmission Fluid P. 238


• Check the brake fluid level monthly.


2 Brake/Clutch Fluid P. 240


• Check the tire pressure monthly. Examine the tread for wear and foreign objects.


2 Checking and Maintaining Tires P. 253


• Check the operation of the exterior lights monthly.


2 Replacing Light Bulbs P. 242


• Check the condition of the wiper blades at least every six months.


2 Checking and Maintaining Wiper Blades P. 250


TOC


Index


Home


222


1Inspection and Maintenance


U.S. models Maintenance, replacement, or repair of emissions control devices and systems may be done by any automotive repair establishment or individuals using parts that are “certified” to EPA standards.


According to state and federal regulations, failure to perform maintenance on the maintenance main items marked with # will not void your emissions warranties. However, all maintenance services should be performed in accordance with the intervals indicated by the multi-information display. 2 Maintenance Service Items P. 227


If you want to perform complex maintenance tasks that require more skills and tools, you can purchase a subscription to the Service Express website at www.techinfo.honda.com.


2 Authorized Manuals P. 315


If you want to perform maintenance yourself, make sure that you have the necessary tools and skills first. After performing maintenance, update the records in the separate maintenance booklet.


2013 CR-Z 13 CR-Z-31SZT6200.book 223 ページ 2012年10月25日 木曜日 午後9時9分


uuBefore Performing MaintenanceuSafety When Performing Maintenance


QRG


Safety When Performing Maintenance Some of the most important safety precautions are given here. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.


■ Maintenance Safety • To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames


away from the battery and all fuel related parts.


• Never leave rags, towels, or other flammable objects under the hood.


u Heat from the engine and exhaust can ignite them causing a fire.


• To clean parts, use a commercially available degreaser or parts cleaner,


not gasoline.


• Wear eye protection and protective clothing when working with the 12 volt


battery or compressed air.


• Engine exhaust contains carbon monoxide, which is poisonous and can kill you.


u Only operate the engine if there is sufficient ventilation.


■ Vehicle Safety • The vehicle must be in a stationary condition.


u Make sure your vehicle is parked on level ground, the parking brake is set, and


the engine is off.


• Be aware that hot parts can burn you.


u Make sure to let the engine and exhaust system cool thoroughly before


touching vehicle parts.


• Be aware that moving parts can injure you.


u Do not start the engine unless instructed, and keep your hands and limbs away


from moving parts.


• Do not touch the IMA battery and wiring (orange).


TOC


Index


Home


1Safety When Performing Maintenance


3WARNING


Improperly maintaining this vehicle or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed.


Always follow the inspection and maintenance recommendations according to the schedules in this owner's manual.


3WARNING


Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.


Always follow the procedures and precautions in this owner's manual.


223


2013 CR-Z 13 CR-Z-31SZT6200.book 224 ページ 2012年10月25日 木曜日 午後9時9分


uuBefore Performing MaintenanceuParts and Fluids Used in Maintenance Service


QRG


Parts and Fluids Used in Maintenance Service The use of Honda genuine parts and fluids is recommended when maintaining and servicing your vehicle. Honda genuine parts are manufactured according to the same high quality standards used in Honda vehicles.


TOC


Index


Home


224


2013 CR-Z 13 CR-Z-31SZT6200.book 225 ページ 2012年10月25日 木曜日 午後9時9分


Maintenance Minder™


QRG


TOC


Index


Home


If the engine oil life is less than 15%, you will see the Maintenance Minder messages appear on the multi-information display every time you turn the ignition switch to ON (w. The messages notify you when to change the engine oil, or when to bring your vehicle to a dealer for indicated maintenance services.


To Use Maintenance Minder™ ■ Displaying the Engine Oil Life and Maintenance Items Maintenance items, which should be serviced at the same time that you replace the engine oil, appear on the multi-information display. You can view them on the engine oil life screen when the remaining engine oil life is under 15 percent. 1. Turn the ignition switch to ON (w. 2. Press the


button repeatedly until the engine oil life appears on the multi-


information display.


Maintenance Service Items


Remaining Engine Oil LIfe


1Displaying the Engine Oil Life and Maintenance Items


Based on the engine operating conditions, the remaining engine oil life is calculated and displayed as a percentage.


Displayed Engine Oil


Calculated Engine Oil


Life (%)


100
90
80
70
60
50
40
30
20
15
10


Life (%) 100 to 91
90 to 81
80 to 71
70 to 61
60 to 51
50 to 41
40 to 31
30 to 21
20 to 16
15 to 11
10 to 6
5 to 1


(Information) Buttons


There is a list of maintenance main and sub items you can view on the multi-information display. 2 Maintenance Service Items P. 227


Continued


225


2013 CR-Z 13 CR-Z-31SZT6200.book 226 ページ 2012年10月25日 木曜日 午後9時9分


uuMaintenance Minder™uTo Use Maintenance Minder™


■ Maintenance Minder Messages on the Multi-Information Display


Maintenance Message


Oil Life Display


Explanation


Information


SERVICE DUE SOON


15 %


SERVICE DUE NOW


5 %


SERVICE PAST DUE


Negative Distance


U.S.


The remaining engine oil life is 15 to 6 percent. Once you switch the display by pressing the


(information) button, this message will go off.


The remaining engine oil life is 5 to 1 percent. Press the button to switch to another display.


The engine oil is approaching the end of its service life, and the maintenance items should be inspected and serviced soon.


The engine oil has almost reached the end of its service life, and the maintenance items should be inspected and serviced as soon as possible.


The remaining engine oil life has passed its service life, and a negative distance appears after driving over 10 miles (U.S. models) or 10 km (Canadian models). Press the


button to switch to another


The engine oil life has passed. The maintenance items must be inspected and serviced immediately.


Canada


display.


The system message indicator (


) comes on along with the Maintenance Minder message.


QRG


TOC


Index


Home


226


2013 CR-Z 13 CR-Z-31SZT6200.book 227 ページ 2012年10月25日 木曜日 午後9時9分


QRG


■ Maintenance Service Items


System Message Indicator


Maintenance Minder Message


uuMaintenance Minder™uTo Use Maintenance Minder™


1Maintenance Service Items


• Independent of the Maintenance Minder


information, replace the brake fluid every 3 years. • Inspect idle speed every 160,000 miles (256,000


km).


• Adjust the valves during services A, B, 1, 2, or 3 if


they are noisy.


Main Item


Sub Items


CODE


Maintenance Main Items


CODE


Maintenance Sub Items


● Replace engine oil*1
● Replace engine oil*1 and oil filter ● Inspect front and rear brakes ● Check parking brake adjustment ● Inspect tie rod ends, steering gearbox, and boots ● Inspect suspension components ● Inspect driveshaft boots ● Inspect brake hoses and lines (Including ABS/VSA) ● Inspect all fluid levels and condition of fluids ● Inspect exhaust system# ● Inspect fuel lines and connections# ● Check expiration date for TRK bottle


● Rotate tires ● Replace air cleaner element*2
● Replace dust and pollen filter*3
● Inspect drive belt ● Replace transmission fluid ● Replace spark plugs ● Inspect valve clearance ● Replace engine coolant


*3:


# :


If you drive primarily in urban areas that have high concentrations of soot in the air from industry and from diesel-powered vehicles, replace the dust and pollen filter every 15,000 miles (24,000 km). See information on maintenance and emissions warranty.


*1:


*2:


If a message SERVICE does not appear more than 12 months after the display is reset, change the engine oil every year. If you drive primarily in dusty conditions, replace the air cleaner element every 15,000 miles (24,000 km).


TOC


Index


Home


Continued


227


2013 CR-Z 13 CR-Z-31SZT6200.book 228 ページ 2012年10月25日 木曜日 午後9時9分


uuMaintenance Minder™uTo Use Maintenance Minder™


1Resetting the Display


NOTICE Failure to reset the engine oil life after a maintenance service results in the system showing incorrect maintenance intervals, which can lead to serious mechanical problems.


The dealer will reset the engine oil life display after completing the required maintenance service. If someone other than a dealer performs maintenance service, reset the engine oil life display yourself.


■ Resetting the Display Reset the engine oil life display if you have performed the maintenance service.


Maintenance Item Codes


Engine Oil Life


(Information) Button


SEL/RESET Button


1. Turn the ignition switch to ON (w. 2. Display the engine oil life by repeatedly pressing the


button.


3. Press and hold the SEL/RESET button for 10 seconds or more.


u The oil life reset mode is displayed on the multi-information display.


4. Select RESET with the


button, then press the SEL/RESET button.


u The displayed maintenance items disappear, and the engine oil life display


returns to 100 %.


To cancel the oil life reset mode, select CANCEL, then press the SEL/RESET button.


QRG


TOC


Index


Home


228


2013 CR-Z 13 CR-Z-31SZT6200.book 229 ページ 2012年10月25日 木曜日 午後9時9分


Maintenance Under the Hood


Maintenance Items Under the Hood


QRG


Engine Oil Fill Cap


Washer Fluid (Blue Cap)


Engine Oil Dipstick (Orange Loop)


Radiator Cap


Engine Coolant Reservoir


TOC


Index


Home


Manual transmission models Clutch Fluid (Light Gray Cap)


Brake Fluid (Black Cap)


12 Volt Battery


Automatic Transmission (CVT) Fluid Dipstick (Yellow Loop)


229


2013 CR-Z 13 CR-Z-31SZT6200.book 230 ページ 2012年10月25日 木曜日 午後9時9分


uuMaintenance Under the HooduOpening the Hood


QRG


Opening the Hood


Hood Release Handle


Pull


1. Park the vehicle on a level surface, and set


1Opening the Hood


the parking brake.


2. Pull the hood release handle under the


lower left corner of the dashboard. u The hood will pop up slightly.


3. Push up the hood latch lever in the center of the hood to release the lock mechanism, and open the hood.


NOTICE Do not open the hood when the wiper arms are raised.


The hood will strike the wipers, and may damage either the hood or the wipers.


When closing the hood, check that the hood is securely latched.


If the hood latch lever moves stiffly, or if you can open the hood without lifting the lever, the latch mechanism should be cleaned and lubricated.


Do not open the hood while the Auto Idle Stop function is activated.


Lever


Grip


4. Remove the support rod from the clamp using the grip. Mount the support rod in the hood.


Support Rod


Clamp


When closing, remove the support rod, and stow it in the clamp, then gently lower the hood. Remove your hand at a height of approximately 12 inches (30 cm) and let the hood close.


TOC


Index


Home


230


2013 CR-Z 13 CR-Z-31SZT6200.book 231 ページ 2012年10月25日 木曜日 午後9時9分


uuMaintenance Under the HooduRecommended Engine Oil


1Recommended Engine Oil


Engine Oil Additives Your vehicle does not require oil additives. In fact, they may adversely affect the engine performance and durability.


Recommended Engine Oil


QRG


• Genuine Honda Motor Oil • Premium-grade 0W-20 detergent oil with an API Certification Seal on the


container.


Oil is a major contributor to your engine's performance and longevity. If you drive the vehicle with insufficient or deteriorated oil, the engine may fail or be damaged.


This seal indicates the oil is energy conserving and that it meets the American Petroleum Institute’s latest requirements.


Use a Genuine Honda Motor Oil or another commercial engine oil of suitable viscosity for the ambient temperature as shown.


TOC


Index


Home


Ambient Temperature


■ Synthetic oil You may also use synthetic motor oil if it is labeled with the API Certification Seal and is the specified viscosity grade.


231


2013 CR-Z 13 CR-Z-31SZT6200.book 232 ページ 2012年10月25日 木曜日 午後9時9分


uuMaintenance Under the HooduOil Check


QRG


Oil Check We recommend that you check the engine oil level every time you refuel. Park the vehicle on level ground.


Wait approximately three minutes after turning the engine off before you check the oil.


Dipstick


1. Remove the dipstick (orange loop).


2. Wipe the dipstick with a clean cloth or


paper towel.


3. Insert the dipstick back all the way into


its hole.


1Oil Check


If the oil level is near or below the lower mark, slowly add oil being careful not to overfill.


4. Remove the dipstick again, and check the level. It should be between the upper and lower marks. Add oil if necessary.


Upper Mark Lower Mark


TOC


Index


Home


232


2013 CR-Z 13 CR-Z-31SZT6200.book 233 ページ 2012年10月25日 木曜日 午後9時9分


uuMaintenance Under the HooduAdding Engine Oil


Adding Engine Oil


QRG


1. Unscrew and remove the engine oil fill cap.


1Adding Engine Oil


2. Add oil slowly.


3. Reinstall the engine oil fill cap, and tighten


it securely.


Engine Oil Fill Cap


4. Wait for three minutes and recheck the


engine oil dipstick.


If any oil spills, wipe it up immediately. Spilled oil may damage the engine compartment components.


NOTICE Do not fill the engine oil above the upper mark. Overfilling the engine oil can result in leaks and engine damage.


TOC


Index


Home


233


2013 CR-Z 1Changing the Engine Oil and Oil Filter


NOTICE You may damage the environment if you do not dispose of the oil in a suitable way. If you are changing the oil by yourself, appropriately dispose of the used oil. Put the oil in a sealed container and take it to a recycling center. Do not throw the oil away into a garbage can or onto the ground.


13 CR-Z-31SZT6200.book 234 ページ 2012年10月25日 木曜日 午後9時9分


uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter


QRG


Changing the Engine Oil and Oil Filter You must change the engine oil and oil filter regularly in order to maintain the engine's lubrication. The engine may be damaged if they are not changed regularly.


Change the oil and filter in accordance with the maintenance message on the multi- information display.


1. Run the engine until it reaches normal


operating temperature, and then turn the engine off.


2. Open the hood and remove the engine oil


fill cap.


3. Remove the bolts and clips on the


undercarriage and remove the cover.


4. Remove the drain bolt and washer from the bottom of the engine, and drain the oil into a suitable container.


Under Cover


Clip


Bolt


Drain Bolt


Washer


TOC


Index


Home


234


2013 CR-Z 13 CR-Z-31SZT6200.book 235 ページ 2012年10月25日 木曜日 午後9時9分


QRG


TOC


Index


Home


uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter


5. Remove the oil filter and dispose of the


1Changing the Engine Oil and Oil Filter


You will need a special wrench to replace the oil filter. You can buy this wrench from a dealer.


When installing the new oil filter, follow the instructions supplied with the oil filter.


Reinstall the engine oil fill cap. Start the engine. The low oil pressure indicator should go off within five seconds. If it does not, turn off the engine, and check your work.


Oil Filter


remaining oil.


6. Check that the filter gasket is not stuck to


the engine contact surface. u If it is stuck, you must detach it.


7. Wipe away dirt and dust adhering to the contact surface of the engine block, and install a new oil filter. u Apply a light coat of new engine oil to


the oil filter gasket.


8. Put a new washer on the drain bolt, then


reinstall the drain bolt. u Tightening torque:


29 lbf∙ft (39 N∙m, 4.0 kgf∙m)


9. Pour the recommended engine oil


into the engine. u Engine oil change capacity (including


filter): 3.8 US qt (3.6 L)


10. Reinstall the engine oil fill cap securely and


start the engine.


11. Run the engine for a few minutes, and


then check that there is no leak from the drain bolt or oil filter.


12. Stop the engine, wait for three


minutes, and then check the oil level on the dipstick. u If necessary, add more engine oil.


235


2013 CR-Z 13 CR-Z-31SZT6200.book 236 ページ 2012年10月25日 木曜日 午後9時9分


uuMaintenance Under the HooduEngine Coolant


QRG


Engine Coolant


Specified coolant: Honda Long Life Antifreeze/Coolant Type 2


1Engine Coolant


NOTICE If temperatures consistently below -22°F (-30°C) are expected, the coolant mixture should be changed to a higher concentration. Consult a dealer for more information.


If Honda antifreeze/coolant is not available, you may use another major brand non-silicate coolant as a temporary replacement. Check that it is a high quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Have the cooling system flushed and refilled with Honda antifreeze/coolant as soon as possible.


Do not add rust inhibitors or other additives to your vehicle's cooling system. They may not be compatible with the coolant or with the engine components.


This coolant is premixed with 50% antifreeze and 50% water. Do not add any straight antifreeze or water.


We recommend you check the engine coolant level every time you refuel. Check the reserve tank first. If it is completely empty, also check the coolant level in the radiator. Add the engine coolant accordingly.


■ Reserve Tank


MAX


Reserve Tank


MIN


Reserve Tank


TOC


Index


Home


236


1. Check the amount of coolant in the


reserve tank.


2. If the coolant level is below the MIN mark,


add the specified coolant until it reaches the MAX mark.


3. Inspect the cooling system for leaks.


2013 CR-Z 13 CR-Z-31SZT6200.book 237 ページ 2012年10月25日 木曜日 午後9時9分


QRG


■ Radiator


Radiator Cap


1. Make sure the engine and radiator


are cool.


2. Turn the radiator cap counterclockwise and relieve any pressure in the cooling system. Do not push the cap down when turning.


3. Push down and turn the radiator cap


counterclockwise to remove it.


4. The coolant level should be up to the base


of the filler neck. Add coolant if it is low.


5. Put the radiator cap back on, and tighten


it fully.


6. Pour coolant into the reserve tank until it reaches the MAX mark. Put the cap back on the reserve tank.


TOC


Index


Home


uuMaintenance Under the HooduEngine Coolant


1Radiator


3WARNING


Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.


Always let the engine and radiator cool down before removing the radiator cap.


NOTICE Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; they can damage components in the engine compartment.


237


2013 CR-Z 13 CR-Z-31SZT6200.book 238 ページ 2012年10月25日 木曜日 午後9時9分


uuMaintenance Under the HooduTransmission Fluid


QRG


Transmission Fluid ■ Automatic Transmission Fluid ■ Continuously Variable Transmission (CVT) Specified fluid: Honda CVTF (continuously variable transmission fluid)


Check the fluid level when the engine is at normal operating temperature.


HOT Range


Upper Mark Lower Mark


1. Park on level ground, and start the engine.


2. Wait until the radiator fan starts and then


turn off the engine. u Perform step 3 after waiting for about 60


seconds (less than 90 seconds).


3. Remove the dipstick (yellow loop) from the transmission and wipe it with a clean cloth.


4. Insert the dipstick all the way back


into the transmission securely, as shown in the image.


5. Remove the dipstick and check the


fluid level. u It should be between the upper and


lower marks in the HOT range.


6. If the level is below the lower mark,


add fluid into the dipstick hole to bring it to the level between the upper and lower marks, and have your vehicle checked by a dealer immediately.


TOC


Index


Home


238


1Automatic Transmission Fluid


NOTICE Do not mix Honda CVTF with other transmission fluids. Using a transmission fluid other than Honda CVTF may adversely affect the operation and durability of your vehicle's transmission, and damage the transmission. Any damage caused by using a transmission fluid that is not equivalent to Honda CVTF is not covered by Honda's new vehicle warranty.


NOTICE Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; they can damage components in the engine compartment.


2013 CR-Z 13 CR-Z-31SZT6200.book 239 ページ 2012年10月25日 木曜日 午後9時9分


QRG


■ Manual Transmission Fluid


Specified fluid: Honda Manual Transmission Fluid (MTF) Check the fluid level when the engine is at normal operating temperature.


Clip


1. Park the vehicle on level ground.


2. Remove the bolts with a wrench and clips with a flat-tip screwdriver, then carefully remove the under cover.


Bolt


Under Cover


uuMaintenance Under the HooduTransmission Fluid


1Manual Transmission Fluid


If Honda MTF is not available, you may use the API certificated SAE 0 W-20 or 5 W-20 viscosity motor oil as a temporary measure. Replace with MTF as soon as possible. Motor oil does not contain the proper additives for the transmission and continued use can cause decreased shifting performance and lead to transmission damage.


TOC


Index


Home


3. Remove the transmission filler bolt


and washer. Carefully feel inside the bolt hole with your fingers. u Check if the fluid level is up to the edge


of the bolt hole.


4. If the fluid level is not up to the edge of the bolt hole, add Honda Manual Transmission Fluid (MTF) until it runs out of the hole.


5. Put a new washer on the filler bolt, then


reinstall the filler bolt. u Tightening torque:


33 lbf∙ft (44 N∙m, 4.5 kgf∙m)


6. Reinstall the under cover with the bolts


and clips.


239


2013 CR-Z 13 CR-Z-31SZT6200.book 240 ページ 2012年10月25日 木曜日 午後9時9分


uuMaintenance Under the HooduBrake/Clutch Fluid


QRG


Brake/Clutch Fluid


Specified fluid: Honda Heavy Duty Brake Fluid DOT 3
Use the same fluid for both the brakes and clutch. ■ Checking the Brake Fluid


Brake Reservoir


The fluid level should be between the MIN and MAX marks on the side of the reservoir.


MAX


MIN


Manual transmission models ■ Checking the Clutch Fluid


Clutch Reservoir


The fluid level should be between the MIN and MAX marks on the side of the reservoir.


MAX MIN


TOC


Index


Home


240


1Checking the Brake Fluid


NOTICE Brake fluid marked DOT 5 is not compatible with your vehicle's braking system and can cause extensive damage.


If the specified brake fluid is not available, you should use only DOT 3 or DOT 4 fluid from a sealed container as a temporary replacement.


Using any non-Honda brake fluid can cause corrosion and decrease the longevity of the system. Have the brake system flushed and refilled with Honda Heavy Duty Brake Fluid DOT 3 as soon as possible.


If the brake fluid level is at or below the MIN mark, have a dealer inspect for leaks or worn brake pads as soon as possible.


1Checking the Clutch Fluid


If the clutch fluid level is at or below the MIN mark, have the system inspected for leaks or an excessively worn clutch plate by a dealer.


2013 CR-Z 13 CR-Z-31SZT6200.book 241 ページ 2012年10月25日 木曜日 午後9時9分


uuMaintenance Under the HooduRefilling Window Washer Fluid


QRG


Refilling Window Washer Fluid Models with washer fluid level gauge Check the amount of window washer fluid using the washer fluid level gauge on the cap.


If the level is low, fill the washer reservoir.


1Refilling Window Washer Fluid


NOTICE Do not use engine antifreeze or a vinegar/water solution in the washer reservoir. Antifreeze can damage your vehicle's paint. A vinegar/water solution can damage the washer pump.


Level Gauge


Models with washer level sensor If the washer fluid is low, a message appears on the multi-information display.


Pour the washer fluid carefully. Do not overflow the reservoir.


TOC


Index


Home


241


2013 CR-Z 13 CR-Z-31SZT6200.book 242 ページ 2012年10月25日 木曜日 午後9時9分


Replacing Light Bulbs


QRG


Headlight Bulbs When replacing, use the following bulbs. High beam headlight: 60 W (HB3 for halogen bulb type) Low beam headlight: 55 W (H11 for halogen bulb type)


35W (D4S for high voltage discharge)


■ High Beam Headlight


1. Remove the cover.


Cover


Bulb


TOC


Index


Home


242


Coupler


Tab


2. Push the tab to remove the coupler.


3. Rotate the old bulb to the left to remove.


4. Insert a new bulb into the headlight


assembly and turn it to the right.


5. Insert the coupler into the connector of


the bulb.


1Headlight Bulbs


NOTICE Halogen bulbs get very hot when lit.


Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.


The headlight aim is set by the factory, and does not need to be adjusted. However, if you regularly carry heavy items in the cargo area, have the aiming readjusted at a dealer or by a qualified technician.


When replacing a halogen bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.


The exterior lights' inside lenses (headlights, brake lights, etc.) may fog temporarily after a car wash or while driving in the rain. This does not impact the exterior light function.


However, if you see a large amount of water or ice accumulated inside the lenses, have your vehicle inspected by a dealer.


2013 CR-Z 13 CR-Z-31SZT6200.book 243 ページ 2012年10月25日 木曜日 午後9時9分


uuReplacing Light BulbsuHeadlight Bulbs


■ Low Beam Headlights (High Voltage Discharge Type)* High voltage can remain in the circuit for a long period of time after the light is switched off. Do not attempt to inspect or replace the high voltage discharge type bulbs yourself. Ask a dealer to inspect and replace low beam headlights.


■ Low Beam Headlights (Halogen Headlights)*


Coupler


1. Push the tab to remove the coupler.


2. Rotate the old bulb to the left to remove.


3. Insert a new bulb into the headlight


assembly and turn it to the right.


4. Insert the coupler into the connector of


the bulb.


Tab


Bulb


QRG


TOC


Index


Home


* Not available on all models


243


2013 CR-Z 13 CR-Z-31SZT6200.book 244 ページ 2012年10月25日 木曜日 午後9時9分


uuReplacing Light BulbsuFog Light Bulbs*


QRG


Fog Light Bulbs* When replacing, use the following bulbs. Fog Lights: 35 W (H8 for halogen bulb type)


Inner Fender


Screw


Clip


1. Turn the steering wheel all the way to the


opposite side from the fog light being replaced. Passenger side: Turn the steering wheel to the left. Driver side: Turn the steering wheel to the right.


2. Remove the clip and screws, and pull the


inner fender back.


1Fog Light Bulbs *


NOTICE Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.


When replacing a halogen bulb, handle it by its plastic case, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.


Insert a flat-tip screwdriver, lift and remove the central pin to remove the clip.


Central Pin


TOC


Index


Home


244


* Not available on all models


2013 CR-Z 13 CR-Z-31SZT6200.book 245 ページ 2012年10月25日 木曜日 午後9時9分


uuReplacing Light BulbsuFog Light Bulbs*


Bulb


Tab


Coupler


3. Push the tab to remove the coupler.


1Fog Light Bulbs*


4. Rotate the old bulb to the left to remove.


5. Insert a new bulb into the light assembly


and turn it to the right.


6. Insert the coupler into the connector of


the bulb.


Insert the clip with the central pin raised, and push until it is flat.


Push until the pin is flat.


QRG


TOC


Loading...
x