2013 Honda CR V Owners Manual

Index

Home

258

1Parking Your Vehicle

Do not park your vehicle near flammable objects, such as dry grass, oil, or timber. Heat from the exhaust can cause a fire.

1When Stopped

NOTICE The following can damage the transmission: • Depressing the accelerator and brake pedals

simultaneously.

• Holding the vehicle in place when facing uphill by

depressing the accelerator pedal.

• Moving the shift lever into (P before the vehicle

stops completely.

Raise the wiper arms when snow is expected.

2013 CR-V13 CR-V-31T0A6100.book 259 ページ ２０１２年８月１０日　金曜日　午後３時３４分

Multi-View Rear Camera

QRG

About Your Multi-View Rear Camera Models with navigation system See the Navigation System Manual.

Models without navigation system The multi-information display can display your vehicle’s rear view. The display automatically changes to the rear view when the shift lever is moved to (R.

■ Multi-View Rear Camera Display Area

Guidelines

Bumper

Camera

Approx. 20 inches (50 cm) Tailgate Open Range Approx. 39 inches (1 m) Approx. 79 inches (2 m) Approx. 118 inches (3 m)

Wide View Mode

Normal View Mode

Top Down View Mode

You can view three different camera angles on the rearview display. Press the selector knob to switch the angle.

If the last used viewing mode is Wide or Normal, the same mode is selected the next time you shift into (R. If Top view was last used, Wide mode is selected.

TOC

Index

Home

1About Your Multi-View Rear Camera

The rear camera view is restricted. You cannot see the corner ends of the bumper or what is underneath the bumper. Its unique lens also makes objects appear closer or farther than they actually are.

Visually confirm that it is safe to drive before backing up. Certain conditions, such as weather, lighting, and high temperatures, may also restrict the rear view. Do not rely on the rearview display which does not give you all information about conditions at the back of your vehicle.

If the camera lens is covered with dirt or moisture, use a soft, moist cloth to keep the lens clean and free of debris.

259

2013 CR-V13 CR-V-31T0A6100.book 260 ページ ２０１２年８月１０日　金曜日　午後３時３４分

Refueling

QRG

Fuel Information ■ Fuel recommendation Unleaded gasoline, pump octane number 87 or higher Use of lower octane gasoline can cause a persistent, heavy metallic knocking noise that can lead to engine damage.

■ Top tier detergent gasoline Because the level of detergency and additives in gasoline vary in the market, Honda endorses the use of “TOP TIER Detergent Gasoline” where available to help maintain the performance and reliability of your vehicle. TOP TIER Detergent Gasoline meets a new gasoline standard jointly established by leading automotive manufacturers to meet the needs of today’s advanced engines.

TOC

Qualifying gasoline retailers will, in most cases, identify their gasoline as having met “TOP TIER Detergent Gasoline” standards at the retail location. This fuel is guaranteed to contain the proper level of detergent additives and be free of metallic additives. The proper level of detergent additives, and absence of harmful metallic additives in gasoline, help avoid build-up of deposits in your engine and emission control system.

For further important fuel-related information for your vehicle, or on information on gasoline that does not contain MMT, visit www.hondacars.com. In Canada, visit www.honda.ca for additional information on gasoline. For more information on top tier gasoline, visit www.toptiergas.com.

1Fuel Information

NOTICE We recommend quality gasoline containing detergent additives that help prevent fuel system and engine deposits. In addition, in order to maintain good performance, fuel economy, and emissions control, we strongly recommend the use of gasoline that does NOT contain harmful manganese-based fuel additives such as MMT, if such gasoline is available.

Use of gasoline with these additives may adversely affect performance, and cause the malfunction indicator lamp on your instrument panel to come on. If this happens, contact a dealer for service.

Some gasoline today is blended with oxygenates such as ethanol. Your vehicle is designed to operate on oxygenated gasoline containing up to 10% ethanol by volume. Do not use gasoline containing methanol. If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline.

Index

Home

260

2013 CR-V13 CR-V-31T0A6100.book 261 ページ ２０１２年８月１０日　金曜日　午後３時３４分

QRG

■ Fuel tank capacity: 15.3 US gal (58 liters)

How to Refuel

1. Stop your vehicle with the service

station pump on the left side of the vehicle in the rear.

Pull

2. Turn off the engine.

3. Pull on the fuel fill door release

handle under the lower left corner of the dashboard. u The fuel fill door opens.

uuRefuelinguHow to Refuel

1How to Refuel

3WARNING

Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.

• Stop the engine, and keep heat, sparks,

and flame away.

• Handle fuel only outdoors. • Wipe up spills immediately.

TOC

Index

Home

Continued

261

2013 CR-V13 CR-V-31T0A6100.book 262 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuRefuelinguHow to Refuel

4. Remove the fuel fill cap slowly. If you hear a release of air, wait until this stops, then turn the knob slowly to open the fuel fill cap.

Cap

Cap

Holder

5. Place the fuel fill cap in the holder.

6. Insert the fuel filler nozzle fully.

u When the tank is full, the filler nozzle will click off automatically. This leaves space in the fuel tank in case the fuel expands with a change in the temperature.

7. After filling, replace the fuel fill cap, tightening it until you hear it click at least once. u Shut the fuel fill door by hand.

1How to Refuel

The filler nozzle automatically stops to leave space in the fuel tank so that fuel does not overflow as a result of changes in air temperature.

If the filler nozzle keeps turning off when the tank is not full, there may be a problem with the pump's fuel vapor recovery system. Try filling at another pump. If this does not fix the problem, consult a dealer.

Do not continue to add fuel after the filler nozzle has automatically stopped. Additional fuel can exceed the full tank capacity.

QRG

TOC

Index

Home

262

2013 CR-V13 CR-V-31T0A6100.book 263 ページ ２０１２年８月１０日　金曜日　午後３時３４分

Fuel Economy

QRG

Improving Fuel Economy Fuel economy depends on several conditions, including driving conditions, your driving habits, the condition of your vehicle, and loading. Depending on these and other conditions, you may or may not achieve the rated fuel economy of this vehicle.

■ Maintenance and Fuel Economy You can optimize your fuel economy with proper maintenance of your vehicle. Always maintain your vehicle in accordance with the messages displayed on the information display/multi-information display. • Use the recommended viscosity engine oil, displaying the API Certification Seal.

• Maintain the specified tire pressure.

• Do not load the vehicle with excess cargo.

• Keep your vehicle clean. A buildup of snow or mud on your vehicle's underside

adds weight and increases wind resistance.

TOC

Index

Home

1Improving Fuel Economy

Direct calculation is the recommended method to determine actual fuel consumed while driving.

Miles driven

Gallons of

fuel

Miles per

Gallon

100

Liter

Kilometers

L per 100 km

In Canada, posted fuel economy numbers are established following a simulated test. For more information on how this test is performed, please visit http://oee.nrcan.gc.ca/

263

2013 CR-V13 CR-V-31T0A6100.book 264 ページ ２０１２年８月１０日　金曜日　午後３時３４分

Accessories and Modifications

QRG

Accessories When installing accessories, check the following: • Do not install accessories on the windshield. They can obstruct your view and

delay your reaction to driving conditions.

• Do not install accessories on the side pillars or across the side windows.

Accessories installed in these areas may interfere with proper operation of the side curtain airbags.

• Be sure electronic accessories do not overload electrical circuits or interfere with

proper operation of your vehicle.

2 Fuses P. 335

• Before installing any electronic accessory, have the installer contact a dealer for

assistance. If possible, have a dealer inspect the final installation.

Modifications Do not modify your vehicle or use non-Honda components that can affect its handling, stability, and reliability.

Overall vehicle performance can be affected. Always make sure all equipment is properly installed and maintained, and that it meets federal, state, province, territory, and local regulations.

TOC

Index

Home

264

1Accessories and Modifications

3WARNING

Improper accessories or modifications can affect your vehicle's handling, stability, and performance, and cause a crash in which you can be seriously hurt or killed.

Follow all instructions in this owner's manual regarding accessories and modifications.

Honda Genuine accessories are recommended to ensure proper operation on your vehicle.

2013 CR-V13 CR-V-31T0A6100.book 265 ページ ２０１２年８月１０日　金曜日　午後３時３４分

QRG

Index

Home

Maintenance

This chapter discusses basic maintenance.

Before Performing Maintenance

Inspection and Maintenance ............ 266
Safety When Performing Maintenance..... 267
Parts and Fluids Used in Maintenance Service ........................................... 268
Maintenance Minder™ .................... 269
Maintenance Under the Hood

Maintenance Items Under the Hood..... 275
Opening the Hood ........................... 276
Recommended Engine Oil ................ 277
Oil Check......................................... 278
Adding Engine Oil............................ 279
Changing the Engine Oil and Oil Filter ..... 280

Engine Coolant ................................ 282
Transmission Fluid............................ 284
Brake Fluid....................................... 285
Refilling Window Washer Fluid......... 286
Replacing Light Bulbs ....................... 287
Checking and Maintaining Wiper Blades....294
Checking and Maintaining Tires

Checking Tires ................................. 298
Tire and Loading Information Label...... 299
Tire Labeling .................................... 299
DOT Tire Quality Grading (U.S. Vehicles).......301
Wear Indicators................................ 303
Tire Service Life ................................ 303

Tire and Wheel Replacement ........... 304
Tire Rotation.................................... 305
Winter Tires ..................................... 306
Battery............................................... 307
Remote Transmitter Care

Replacing the Button Battery ........... 308

Remote Control and Wireless Headphone Care * ........................... 309
Heating and Cooling System */Climate Control System * Maintenance....... 311
Cleaning

Interior Care .................................... 312
Exterior Care.................................... 314

* Not available on all models

265

2013 CR-V13 CR-V-31T0A6100.book 266 ページ ２０１２年８月１０日　金曜日　午後３時３４分

Before Performing Maintenance

QRG

Inspection and Maintenance For your safety, perform all listed inspections and maintenance to keep your vehicle in good condition. If you become aware of any abnormality (noise, smell, insufficient brake fluid, oil residue on the ground, etc.), have your vehicle inspected by a dealer. (Note, however, that service at a dealer is not mandatory to keep your warranties in effect.) Refer to the separate maintenance booklet for detailed maintenance and inspection information.

■ Types of Inspection and Maintenance ■ Daily inspections Perform inspections before long distance trips, when washing the vehicle, or when refueling.

■ Periodic inspections • Check the automatic transmission fluid level monthly.

2 Automatic Transmission Fluid P. 284

• Check the brake fluid level monthly. 2 Checking the Brake Fluid P. 285

• Check the tire pressure monthly. Examine the tread for wear and foreign objects.

2 Checking and Maintaining Tires P. 298

• Check the operation of the exterior lights monthly.

2 Replacing Light Bulbs P. 287

• Check the condition of the wiper blades at least every six months.

2 Checking and Maintaining Wiper Blades P. 294

TOC

Index

Home

266

1Inspection and Maintenance

U.S. models Maintenance, replacement, or repair of emissions control devices and systems may be done by any automotive repair establishment or individuals using parts that are “certified” to EPA standards.

According to state and federal regulations, failure to perform maintenance on the maintenance main items marked with # will not void your emissions warranties. However, all maintenance services should be performed in accordance with the intervals indicated by the information display/multi- information display.

2 Maintenance Service Items P. 272

If you want to perform complex maintenance tasks that require more skills and tools, you can purchase a subscription to the Service Express website at www.techinfo.honda.com.

2 Authorized Manuals P. 351

If you want to perform maintenance yourself, make sure that you have the necessary tools and skills first. After performing maintenance, update the records in the separate maintenance booklet.

2013 CR-V13 CR-V-31T0A6100.book 267 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuBefore Performing MaintenanceuSafety When Performing Maintenance

QRG

Safety When Performing Maintenance Some of the most important safety precautions are given here. However, we cannot warn you of every conceivable hazard that can arise in performing maintenance. Only you can decide whether or not you should perform a given task.

■ Maintenance Safety • To reduce the possibility of fire or explosion, keep cigarettes, sparks, and flames

away from the battery and all fuel related parts.

• Never leave rags, towels, or other flammable objects under the hood.

u Heat from the engine and exhaust can ignite them causing a fire.

• To clean parts, use a commercially available degreaser or parts cleaner,

not gasoline.

• Wear eye protection and protective clothing when working with the battery or

compressed air.

• Engine exhaust contains carbon monoxide, which is poisonous and can kill you.

u Only operate the engine if there is sufficient ventilation.

■ Vehicle Safety • The vehicle must be in a stationary condition.

u Make sure your vehicle is parked on level ground, the parking brake is set, and

the engine is off.

• Be aware that hot parts can burn you.

u Make sure to let the engine and exhaust system cool thoroughly before

touching vehicle parts.

• Be aware that moving parts can injure you.

u Do not start the engine unless instructed, and keep your hands and limbs away

from moving parts.

TOC

Index

Home

1Safety When Performing Maintenance

3WARNING

Improperly maintaining this vehicle or failing to correct a problem before driving can cause a crash in which you can be seriously hurt or killed.

Always follow the inspection and maintenance recommendations according to the schedules in this owner's manual.

3WARNING

Failure to properly follow maintenance instructions and precautions can cause you to be seriously hurt or killed.

Always follow the procedures and precautions in this owner's manual.

267

2013 CR-V13 CR-V-31T0A6100.book 268 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuBefore Performing MaintenanceuParts and Fluids Used in Maintenance Service

QRG

Parts and Fluids Used in Maintenance Service The use of Honda genuine parts and fluids is recommended when maintaining and servicing your vehicle. Honda genuine parts are manufactured according to the same high quality standards used in Honda vehicles.

TOC

Index

Home

268

2013 CR-V13 CR-V-31T0A6100.book 269 ページ ２０１２年８月１０日　金曜日　午後３時３４分

Maintenance Minder™

If the engine oil life is less than 15%, you will see the Maintenance Minder messages appear on the information display and the multi-information display every time you turn the ignition switch to ON (w. The messages notify you when to change the engine oil, or when to bring your vehicle to a dealer for indicated maintenance services.

1To Use Maintenance MinderTM

Based on the engine operating conditions, the remaining engine oil life is calculated and displayed as a percentage.

Displayed Engine Oil

Calculated Engine Oil

To Use Maintenance MinderTM ■ Displaying the Engine Oil Life on the Information Display

1. Turn the ignition switch to ON (w.

2. Press the

(Select/Reset) knob repeatedly

until the engine oil life appears on the information display.

The Maintenance Minder indicator ( ) stays on in the instrument panel after the engine oil life becomes 0%. Have the indicated maintenance done by a dealer immediately.

Life (%)

100
90
80
70
60
50
40
30
20
15
10

Life (%) 100 to 91
90 to 81
80 to 71
70 to 61
60 to 51
50 to 41
40 to 31
30 to 21
20 to 16
15 to 11
10 to 6
5 to 1

There is a list of maintenance main and sub items you can view on the multi-information display. 2 Maintenance Service Items P. 272

QRG

TOC

Index

Home

Continued

269

2013 CR-V13 CR-V-31T0A6100.book 270 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuMaintenance Minder™uTo Use Maintenance MinderTM

QRG

TOC

Index

Home

270

■ Displaying the Engine Oil Life and Maintenance Items on

the Multi-information Display

Maintenance items, which should be serviced at the same time that you replace the engine oil, appear on the multi-information display. You can view them on the Maintenance info screen at any time. 1. Turn the ignition switch to ON (w.

2. Press the MENU button to go to the Vehicle Menu screen.

3. Select Vehicle Information with the (+ button, then press the SOURCE button.

4. Press the SOURCE button again to go to the Maintenance info screen. The

engine oil life appears on the multi-information display.

Engine Oil Life

2345
50

Main Item

Sub Item

SOURCE Button

MENU Button

SOURCE

MENU

2013 CR-V13 CR-V-31T0A6100.book 271 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuMaintenance Minder™uTo Use Maintenance MinderTM

QRG

TOC

Index

Home

■ Maintenance Minder Messages on the Multi-Information Display and Information Display

Oil Life Display on the Information Display

Oil Life Display

Explanation

Information

Maintenance Minder

Indicator

15%

Engine oil

Air filters

5%

Engine oil

Air filters

2345
15

2345

—

The engine oil life indicator starts to appear along with other due soon maintenance item codes when the remaining oil life becomes 15 percent.

The SERVICE message also starts to appear along with the engine oil life indicator and the maintenance item codes.

The remaining engine oil life has passed its service life, and a negative distance appears after driving over 10 miles (U.S. models) or 10 km (Canadian models). The negative distance on the display blinks.

The engine oil is approaching the end of its service life.

The engine oil has almost reached the end of its service life, and the maintenance items should be inspected and serviced as soon as possible.

The engine oil life has passed. The maintenance items must be inspected and serviced immediately.

Starts to come on when the remaining engine oil life becomes 15 percent. It goes off when the display is switched.

Stays on as a reminder even when the display is switched.

Continued

271

2013 CR-V13 CR-V-31T0A6100.book 272 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuMaintenance Minder™uTo Use Maintenance MinderTM

QRG

■ Maintenance Service Items

System Message Indicator

Maintenance Minder Message

1Maintenance Service Items

• Independent of the Maintenance Minder

information, replace the brake fluid every 3 years.

• Inspect idle speed every 160,000 miles (256,000

km).

• Adjust the valves during services A, B, 1, 2, or 3 if

they are noisy.

Main Item

Sub Items

Maintenance Main Items

CODE

Maintenance Sub Items

CODE

● Replace engine oil*1
● Replace engine oil*1 and oil filter ● Inspect front and rear brakes ● Check parking brake adjustment ● Inspect tie rod ends, steering gearbox, and boots ● Inspect suspension components ● Inspect driveshaft boots ● Inspect brake hoses and lines (Including ABS/VSA) ● Inspect all fluid levels and condition of fluids ● Inspect exhaust system# ● Inspect fuel lines and connections#

*1:

# :

If a message SERVICE does not appear more than 12 months after the display is reset, change the engine oil every year. See information on maintenance and emissions warranty.

* Not available on all models

TOC

Index

Home

272

● Rotate tires ● Replace air cleaner element*2
● Replace dust and pollen filter*3
● Inspect drive belt ● Replace transmission fluid*4
● Replace spark plugs ● Inspect valve clearance ● Replace engine coolant ● Replace rear differential fluid *

*2: *3:

*4:

If you drive in dusty conditions, replace the air cleaner element every 15,000 miles (24,000 km). If you drive primarily in urban areas that have high concentrations of soot in the air from industry and from diesel-powered vehicles, replace the dust and pollen filter every 15,000 miles (24,000 km). If you tow your vehicle behind a motorhome, the transmission fluid must be changed every 2 years or 30,000 miles (48,000 km), whichever comes first.

2013 CR-V13 CR-V-31T0A6100.book 273 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuMaintenance Minder™uTo Use Maintenance MinderTM

■ Resetting the Display Reset the engine oil life display if you have performed the maintenance service. On the informaiton display

1. Turn the ignition switch to ON (w.

2. Display the engine oil life by repeatedly

pressing the

(Select/Reset) knob.

3. Press and hold the

knob for ten seconds

or more. uThe engine oil life indicator and the

maintenance item codes blink.

4. Press the

knob for five seconds or more.

uThe displayed maintenance items

disappear, and the engine oil life display returns to 100%.

1Resetting the Display

NOTICE Failure to reset the engine oil life after a maintenance service results in the system showing incorrect maintenance intervals, which can lead to serious mechanical problems.

The dealer will reset the engine oil life display after completing the required maintenance service. If someone other than a dealer performs maintenance service, reset the engine oil life display yourself.

QRG

TOC

Index

Home

Continued

273

2013 CR-V13 CR-V-31T0A6100.book 274 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuMaintenance Minder™uTo Use Maintenance MinderTM

QRG

On the multi-information display

Engine Oil Life

Maintenance Item Codes

SOURCE Button

(- Button

1. Turn the ignition switch to ON (w.

2. Go to the Maintenance info screen.

2 Displaying the Engine Oil Life and Maintenance Items on the Multi-

information Display P. 270

3. Press the SOURCE button.

u The oil life reset mode is displayed on the multi-information display.

4. Select Yes with the (- button, then press the SOURCE button.

u The displayed maintenance items disappear, and the engine oil life display

returns to 100%.

u Any maintenance items that are necessary for your vehicle at the next

maintenance service will appear.

To cancel the oil life reset mode, select No, then press the SOURCE button.

TOC

Index

Home

274

2013 CR-V13 CR-V-31T0A6100.book 275 ページ ２０１２年８月１０日　金曜日　午後３時３４分

Maintenance Under the Hood

Maintenance Items Under the Hood

QRG

Engine Oil Fill Cap

Engine Oil Dipstick (Orange Handle)

Washer Fluid (Blue Cap)

Engine Coolant Reservoir

TOC

Index

Home

Radiator Cap

Brake Fluid (Black Cap)

Battery

Automatic Transmission Fluid Dipstick (Yellow Loop)

275

2013 CR-V13 CR-V-31T0A6100.book 276 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuMaintenance Under the HooduOpening the Hood

Opening the Hood

QRG

Hood Release Handle

Pull

1. Park the vehicle on a level surface, and set

1Opening the Hood

the parking brake.

2. Pull the hood release handle under the

lower left corner of the dashboard. u The hood will pop up slightly.

3. Push up the hood latch lever in the center of the hood to release the lock mechanism, and open the hood.

NOTICE Do not open the hood when the wiper arms are raised.

The hood will strike the wipers, and may damage either the hood or the wipers.

When closing the hood, check that the hood is securely latched.

If the hood latch lever moves stiffly, or if you can open the hood without lifting the lever, the latch mechanism should be cleaned and lubricated.

Lever

Support Rod Grip

Clamp

TOC

Index

Home

276

4. Remove the support rod from the clamp using the grip. Mount the support rod in the hood.

When closing, remove the support rod, and stow it in the clamp, then gently lower the hood. Remove your hand at a height of approximately 12 inches (30 cm) and let the hood close.

2013 CR-V13 CR-V-31T0A6100.book 277 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuMaintenance Under the HooduRecommended Engine Oil

1Recommended Engine Oil

Engine Oil Additives Your vehicle does not require oil additives. In fact, they may adversely affect the engine performance and durability.

Recommended Engine Oil

QRG

• Genuine Honda Motor Oil • Premium-grade 0W-20 detergent oil with an API Certification Seal on the

container.

Oil is a major contributor to your engine's performance and longevity. If you drive the vehicle with insufficient or deteriorated oil, the engine may fail or be damaged.

This seal indicates the oil is energy conserving and that it meets the American Petroleum Institute’s latest requirements.

Use a Genuine Honda Motor Oil or another commercial engine oil of suitable viscosity for the ambient temperature as shown.

TOC

Index

Home

Ambient Temperature

■ Synthetic oil You may also use synthetic motor oil if it is labeled with the API Certification Seal and is the specified viscosity grade.

277

2013 CR-V13 CR-V-31T0A6100.book 278 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuMaintenance Under the HooduOil Check

QRG

Oil Check We recommend that you check the engine oil level every time you refuel. Park the vehicle on level ground.

Wait approximately three minutes after turning the engine off before you check the oil.

1Oil Check

If the oil level is near or below the lower mark, slowly add oil being careful not to overfill.

1. Remove the dipstick (orange handle).

2. Wipe the dipstick with a clean cloth or

paper towel.

3. Insert the dipstick back all the way

into its hole.

4. Remove the dipstick again, and check the level. It should be between the upper and lower marks. Add oil if necessary.

Upper Mark Lower Mark

TOC

Index

Home

278

2013 CR-V13 CR-V-31T0A6100.book 279 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuMaintenance Under the HooduAdding Engine Oil

Adding Engine Oil

QRG

1. Unscrew and remove the engine oil fill cap.

1Adding Engine Oil

2. Add oil slowly.

3. Reinstall the engine oil fill cap, and tighten

it securely.

4. Wait for three minutes and recheck the

engine oil dipstick.

If any oil spills, wipe it up immediately. Spilled oil may damage the engine compartment components.

NOTICE Do not fill the engine oil above the upper mark. Overfilling the engine oil can result in leaks and engine damage.

Engine Oil Fill Cap

TOC

Index

Home

279

2013 CR-V1Changing the Engine Oil and Oil Filter

NOTICE You may damage the environment if you do not dispose of the oil in a suitable way. If you are changing the oil by yourself, appropriately dispose of the used oil. Put the oil in a sealed container and take it to a recycling center. Do not throw the oil away into a garbage can or onto the ground.

13 CR-V-31T0A6100.book 280 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter

QRG

Changing the Engine Oil and Oil Filter You must change the engine oil and oil filter regularly in order to maintain the engine's lubrication. The engine may be damaged if they are not changed regularly.

Change the oil and filter in accordance with the maintenance message on the information display/multi-information display.

1. Run the engine until it reaches normal

operating temperature, and then turn the engine off.

2. Open the hood and remove the engine oil

fill cap.

3. Remove the bolts on the undercarriage

and remove the under cover.

4. Remove the drain bolt and washer from the bottom of the engine, and drain the oil into a suitable container.

Bolt

Under Cover

Drain Bolt

Washer

TOC

Index

Home

280

2013 CR-V13 CR-V-31T0A6100.book 281 ページ ２０１２年８月１０日　金曜日　午後３時３４分

QRG

TOC

Index

Home

uuMaintenance Under the HooduChanging the Engine Oil and Oil Filter

5. Remove the oil filter and dispose of the

1Changing the Engine Oil and Oil Filter

You will need a special wrench to replace the oil filter. You can buy this wrench from a dealer.

When installing the new oil filter, follow the instructions supplied with the oil filter.

Reinstall the engine oil fill cap. Start the engine. The low oil pressure indicator should go off within five seconds. If it does not, turn off the engine, and check your work.

Oil Filter

remaining oil.

6. Check that the filter gasket is not stuck to

the engine contact surface. u If it is stuck, you must detach it.

7. Wipe away dirt and dust adhering to the contact surface of the engine block, and install a new oil filter. u Apply a light coat of new engine oil to

the oil filter gasket.

8. Put a new washer on the drain bolt, then

reinstall the drain bolt. u Tightening torque:

30 lbf∙ft (40 N∙m, 4.0 kgf∙m)

9. Pour the recommended engine oil into the

engine. u Engine oil change capacity (including

filter): 4.2 US qt (4.0 L)

10. Reinstall the engine oil fill cap securely and

start the engine.

11. Run the engine for a few minutes, and

then check that there is no leak from the drain bolt or oil filter.

12. Stop the engine, wait for three minutes,

and then check the oil level on the dipstick. u If necessary, add more engine oil.

281

2013 CR-V13 CR-V-31T0A6100.book 282 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuMaintenance Under the HooduEngine Coolant

Engine Coolant

QRG

Specified coolant: Honda Long Life Antifreeze/Coolant Type 2

1Engine Coolant

This coolant is premixed with 50% antifreeze and 50% water. Do not add any straight antifreeze or water.

We recommend you check the engine coolant level every time you refuel. Check the reserve tank first. If it is completely empty, also check the coolant level in the radiator. Add the engine coolant accordingly.

■ Reserve Tank

MAX

1. Check the amount of coolant in the reserve

tank.

Reserve Tank

MIN

2. If the coolant level is below the MIN mark,

add the specified coolant until it reaches the MAX mark.

3. Inspect the cooling system for leaks.

NOTICE If temperatures consistently below −22°F (−30°C) are expected, the coolant mixture should be changed to a higher concentration. Consult a dealer for more information.

If Honda antifreeze/coolant is not available, you may use another major brand non-silicate coolant as a temporary replacement. Check that it is a high quality coolant recommended for aluminum engines. Continued use of any non-Honda coolant can result in corrosion, causing the cooling system to malfunction or fail. Have the cooling system flushed and refilled with Honda antifreeze/coolant as soon as possible.

Do not add rust inhibitors or other additives to your vehicle's coolant system. They may not be compatible with the coolant or with the engine components.

TOC

Index

Home

282

2013 CR-V13 CR-V-31T0A6100.book 283 ページ ２０１２年８月１０日　金曜日　午後３時３４分

QRG

■ Radiator

1. Make sure the engine and radiator

Radiator Cap

are cool.

2. Turn the radiator cap counterclockwise and relieve any pressure in the coolant system. Do not push the cap down when turning.

3. Push down and turn the radiator cap

counterclockwise to remove it.

uuMaintenance Under the HooduEngine Coolant

1Radiator

3WARNING

Removing the radiator cap while the engine is hot can cause the coolant to spray out, seriously scalding you.

Always let the engine and radiator cool down before removing the radiator cap.

TOC

Index

Home

4. The coolant level should be up to the base

of the filler neck. Add coolant if it is low.

5. Put the radiator cap back on, and tighten

NOTICE Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; they can damage components in the engine compartment.

it fully.

6. Pour coolant into the reserve tank until it reaches the MAX mark. Put the cap back on the reserve tank.

283

2013 CR-V13 CR-V-31T0A6100.book 284 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuMaintenance Under the HooduTransmission Fluid

QRG

Transmission Fluid ■ Automatic Transmission Fluid

Specified fluid: Honda ATF DW-1 (automatic transmission fluid)

Check the fluid level when the engine is at normal operating temperature.

HOT Range

Upper Mark Lower Mark

1. Park on level ground, and start the engine.

2. Wait until the radiator fan starts and then

turn off the engine. u Perform step 3 after waiting for about 60

seconds (less than 90 seconds).

3. Remove the dipstick (yellow loop) from the transmission and wipe it with a clean cloth.

4. Insert the dipstick all the way back into

the transmission securely, as shown in the image.

5. Remove the dipstick and check the

fluid level. u It should be between the upper and

lower marks in the HOT range.

6. If the level is below the lower mark,

add fluid into the dipstick hole to bring it to the level between the upper and lower marks, and have your vehicle checked by a dealer immediately.

TOC

Index

Home

284

1Automatic Transmission Fluid

NOTICE Do not mix Honda ATF DW-1 with other transmission fluids.

Using a transmission fluid other than Honda ATF

DW-1 may adversely affect the operation and durability of your vehicle's transmission, and damage the transmission.

Any damage caused by using a transmission fluid that is not equivalent to Honda ATF DW-1 is not covered by Honda's new vehicle warranty.

NOTICE Pour the fluid slowly and carefully so you do not spill any. Clean up any spills immediately; they can damage components in the engine compartment.

2013 CR-V13 CR-V-31T0A6100.book 285 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuMaintenance Under the HooduBrake Fluid

Brake Fluid

QRG

Specified fluid: Honda Heavy Duty Brake Fluid DOT 3

1Brake Fluid

■ Checking the Brake Fluid

The fluid level should be between the MIN and MAX marks on the side of the reservoir.

MAX

MIN

Brake Reservoir

NOTICE Brake fluid marked DOT 5 is not compatible with your vehicle's braking system and can cause extensive damage.

If the specified brake fluid is not available, you should use only DOT 3 or DOT 4 fluid from a sealed container as a temporary replacement.

Using any non-Honda brake fluid can cause corrosion and decrease the longevity of the system. Have the brake system flushed and refilled with Honda Heavy Duty Brake Fluid DOT 3 as soon as possible.

If the brake fluid level is at or below the MIN mark, have a dealer inspect for leaks or worn brake pads as soon as possible.

TOC

Index

Home

285

2013 CR-V13 CR-V-31T0A6100.book 286 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuMaintenance Under the HooduRefilling Window Washer Fluid

QRG

Refilling Window Washer Fluid Check the amount of window washer fluid using the washer fluid level gauge on the cap.

If the level is low, fill the washer reservoir.

Level Gauge

Models with washer level sensor If the washer fluid is low, the indicator appears on the instrument panel.

Pour the washer fluid carefully. Do not overflow the reservoir.

1Refilling Window Washer Fluid

NOTICE Do not use engine antifreeze or a vinegar/water solution in the windshield washer reservoir. Antifreeze can damage your vehicle's paint. A vinegar/water solution can damage the windshield washer pump.

TOC

Index

Home

286

2013 CR-V13 CR-V-31T0A6100.book 287 ページ ２０１２年８月１０日　金曜日　午後３時３４分

Replacing Light Bulbs

QRG

Headlight Bulbs When replacing, use the following bulbs. High/Low beam headlight: 60/55W (H4/HB2)

■ High/Low Beam Headlight

Rubber Weather Seal

1. Remove the coupler.

2. Remove the rubber weather seal.

3. Remove the hold-down wire, then remove

the bulb.

4. Insert a new bulb.

Coupler

Hold-down Wire

Bulb

TOC

Index

Home

1Headlight Bulbs

NOTICE Halogen bulbs get very hot when lit.

Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.

The headlight aim is set by the factory, and does not need to be adjusted. However, if you regularly carry heavy items in the cargo area or tow a trailer, have the aiming readjusted at a dealer or by a qualified technician.

The H4/HB2 type is halogen bulb.

When replacing a bulb, handle it by its base, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.

The exterior lights' inside lenses (headlights, brake lamps, etc.) may fog temporarily after a car wash or while driving in the rain. This does not impact the exterior light function.

However, if you see a large amount of water or ice accumulated inside the lenses, have your vehicle inspected by a dealer.

Continued

287

2013 CR-V13 CR-V-31T0A6100.book 288 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuReplacing Light BulbsuFog Light Bulbs*

QRG

Hold-down Wire

Inspection Window

5. Reinstall the hold-down wire. Hook the end

of the wire on the knob in the slot. u You can see if the hold-down wire is in

the right place from the inspection window.

6. Reinstall the rubber weather seal.

7. Insert the coupler into the connector of

the bulb.

Fog Light Bulbs* When replacing, use the following bulbs. Fog Light: 55 W (H11)

Clip

1. Remove the clip using a flat-tip screwdriver,

and push up the under cover.

1Fog Light Bulbs *

NOTICE Halogen bulbs get very hot when lit. Oil, perspiration, or a scratch on the glass can cause the bulb to overheat and shatter.

The fog lights are halogen bulbs. When replacing a bulb, handle it by its plastic case, and protect the glass from contact with your skin or hard objects. If you touch the glass, clean it with denatured alcohol and a clean cloth.

* Not available on all models

TOC

Index

Home

288

2013 CR-V13 CR-V-31T0A6100.book 289 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuReplacing Light BulbsuSide Marker Light Bulb

2. Push the tab to remove the coupler.

1Fog Light Bulbs*

Bulb

3. Rotate the old bulb to the left to remove.

Insert a flat-tip screwdriver, lift and remove the central pin to remove the clip.

4. Insert new bulb.

Central pin

Coupler

Tab

Side Marker Light Bulb When replacing, use the following bulbs. Side Marker Light: 3 CP

Insert the clip with the central pin raised, and push until it is flat.

Bulb

Socket

1. Turn the socket to the left and remove it,

then remove the old bulb.

2. Insert a new bulb.

Push until the pin is flat.

QRG

TOC

Index

Home

* Not available on all models

289

2013 CR-V13 CR-V-31T0A6100.book 290 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuReplacing Light BulbsuFront Turn Signal/Parking Light Bulbs

QRG

Front Turn Signal/Parking Light Bulbs When replacing, use the following bulbs. Front Turn Signal/Parking: 24/2.2CP

Bulb

Socket

1. Turn the socket to the left and remove it.

2. Push in the old bulb, rotate to the left until

it unlocks, and remove.

3. Insert new bulb.

Brake Light, Taillight, Back-Up Light, Rear Turn Signal Light and Lower Rear Side Marker Light Bulbs When replacing, use the following bulbs. Lower Rear Side Marker/Brake/Taillight: 21/5 W Back-Up Light: 21 W Rear Turn Signal Light: 21 W (Amber)

Bolts

1. Use a Phillip-head screwdriver to remove

the bolts.

2. Pull the light assembly out of the rear pillar.

TOC

Index

Home

290

2013 CR-V13 CR-V-31T0A6100.book 291 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuReplacing Light BulbsuBrake Light, Taillight, Back-Up Light, Rear Turn Signal Light and Lower Rear Side Marker Light Bulbs

3. Turn the socket to the left and remove it.

Remove the old bulb.

4. Insert a new bulb.

Bulb

Socket

Guide

5. Reinstall the light assembly by sliding it on

to the guide on the body.

QRG

TOC

Index

Home

291

2013 CR-V13 CR-V-31T0A6100.book 292 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuReplacing Light BulbsuUpper Rear Side Marker/Taillight

QRG

Upper Rear Side Marker/Taillight When replacing, use the following bulbs. Upper Rear Side Marker/Taillight: 3CP

1. Remove the lower taillight assembly.

2 Brake Light, Taillight, Back-Up Light, Rear Turn Signal Light and Lower Rear

Side Marker Light Bulbs P. 290

2. Use a Phillip-head screwdriver to remove

the bolt.

3. Pull the light assembly out of the rear pillar.

4. Turn the socket to the left and remove it.

Remove the old bulb.

5. Insert a new bulb.

Socket

Bulb

Bolt

TOC

Index

Home

292

2013 CR-V13 CR-V-31T0A6100.book 293 ページ ２０１２年８月１０日　金曜日　午後３時３４分

QRG

Rear License Plate Light Bulb When replacing, use the following bulb. Rear License Plate Light: 3 CP

1. Push the left edge of the lens to the right

and pull out the licence light assembly.

uuReplacing Light BulbsuRear License Plate Light Bulb

Tab

Bulb

2. Push the tabs to remove the lens.

3. Remove the old bulb.

4. Insert a new bulb.

Tab

Lens

High-Mount Brake Light Bulb High-mount brake light bulbs are LED type. Have an authorized Honda dealer inspect and replace the light bulbs.

TOC

Index

Home

293

2013 CR-V13 CR-V-31T0A6100.book 294 ページ ２０１２年８月１０日　金曜日　午後３時３４分

Checking and Maintaining Wiper Blades

QRG

Checking Wiper Blades If the wiper blade rubber has deteriorated, it will leave streaks and the metal wiper arm may scratch the window glass.