2013 Honda CR V Owners Manual

Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.

Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.

185

2013 CR-V13 CR-V-31T0A6100.book 186 ページ ２０１２年８月１０日　金曜日　午後３時３４分

Audio Error Messages

QRG

CD Player If a disc error occurs, you may see the following error messages.

Error Message

Cause

Solution

HEAT ERROR

High temperature

UNPLAYABLE/Unsupported

Track/file format not supported

Mechanical error

● Check that the disc is not damaged or deformed, and insert the

● Turn the audio system off and allow the player to cool down until

the error message is cleared.

● Current track/file will be skipped. The next supported track/file

plays automatically.

● Press the

(eject) button and remove the disc, and check that the

error message is cleared.

disc again.

2 Protecting CDs P. 192

● If the error message reappears, press the

button, and pull out

the disc.

● Insert a different disc.

If the new disc plays, there is a problem with the first disc.

● If the error message repeats, or the disc cannot be removed,

contact a dealer. Do not try to force the disc out of the player.

● Check that the disc is not damaged or deformed.

2 Protecting CDs P. 192

BAD DISC PLEASE CHECK OWNERS MANUAL PUSH EJECT

MECH ERROR

BAD DISC PLEASE CHECK OWNERS MANUAL

Servo error

CHECK DISC

Disc error

TOC

Index

Home

186

2013 CR-V13 CR-V-31T0A6100.book 187 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuAudio Error MessagesuiPod®/USB Flash Drive

QRG

iPod®/USB Flash Drive If an error occurs while playing an iPod® or USB flash drive, you may see the following error messages. If you cannot clear the error message, contact a dealer.

Error Message

USB Error

Bad USB Device Please Check Owners Manual.

Solution

Appears when there is a problem with the USB adapter unit. Check if the device is compatible with the USB adapter unit.

Appears when an incompatible device is connected. Disconnect the device. Then turn the audio system off, and turn it on again. Do not reconnect the device that caused the error.

No Song

Appears when the iPod® is empty. Check that compatible files are stored on the device.

Unsupported Ver

Appears when an unsupported iPod® is connected. If it appears when a supported iPod® is connected, update the iPod® software to the newer version.

Retry Connection

Appears when the system does not acknowledge the iPod®. Reconnect the iPod®.

Unplayable File

No Data

Unsupported

Appears when the files in the USB flash drive are DRM or an unsupported format. This error message appears for about 3 seconds, then plays the next song.

Appears when the USB flash drive is empty or there are no MP3, WMA, or AAC files in the USB flash drive. Check that compatible files are stored on the device.

Appears when an unsupported device is connected. If it appears when a supported device is connected, reconnect the device.

TOC

Index

Home

Continued

187

2013 CR-V13 CR-V-31T0A6100.book 188 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuAudio Error MessagesuPandora®

U.S. models Pandora® If an error occurs while playing Pandora®, you may see the following error messages. If you cannot clear the error message, contact a dealer.

Error Message

Solution

PANDORA No Station

Appears when there is no station list on the device. Use the device to create a station.

PANDORA Unsupported Ver. Appears when Pandora version is not supported. Please update the device application.

PANDORA No Service

Appears when Pandora is performing system maintenance. Try again later.

PANDORA Check Device

Appears when Pandora is unable to play music. Check your device.

Pandora Loading

Appears when Pandora is loading.

QRG

TOC

Index

Home

188

2013 CR-V13 CR-V-31T0A6100.book 189 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuAudio Error MessagesuDVD Player Error Messages

QRG

Models with rear entertainment system DVD Player Error Messages

Error Message

Cause

Disc Error

FOCUS Error

MECH Error

Mechanical Error

Solution

Press the disc eject button, and remove the disc. Check for an error indication. Insert the disc again. If the code does not disappear or the disc cannot be removed, consult a dealer.

Region Error

Invalid region code

Heat Error

High temperature

The disc is not playable in this unit. Eject the disc, and insert a disc compatible with this system.

Turn the system off and allow the player to cool down until the error message is cleared.

Format Error

Track/file format not supported

Current track/file will be skipped. The next supported track/file plays automatically.

TOC

Index

Home

189

2013 CR-V13 CR-V-31T0A6100.book 190 ページ ２０１２年８月１０日　金曜日　午後３時３４分

General Information on the Audio System

QRG

XM® Radio Service* ■ Subscribing to XM® Radio 1. You need your radio ID ready before registering for subscription. To see the ID in

the display: Turn the selector knob until 0 appears.

2. Have your radio ID and credit card number ready, and either call or visit the XM®

website to subscribe.

■ Receiving XM® Radio Press the (XM®) button and stay in this mode for about 30 minutes until the service is activated. Make sure your vehicle is in an open area with good reception.

■ XM® Radio Display Messages LOADING: XM® is loading the audio or program information. OFF AIR: The channel is not currently broadcasting. UPDATING: The encryption code is being updated. Channels 0 and 1 still work normally. NO SIGNAL: The signal is too weak in the current location. --------: No such channel exists, the channel is not part of your subscription, or the artist or title information is unavailable. ANTENNA: There is a problem with the XM® antenna. Contact a dealer.

* Not available on all models

TOC

Index

Home

190

1Subscribing to XM® Radio

Contact Information for XM® Radio: US: XM® Radio at www.siriusxm.com or 1-800-852-9696
Canada: XM® Canada at www.xmradio.ca, or 1-877-209-0079

1Receiving XM® Radio

The XM® satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions. Satellite signals are more likely to be blocked by tall buildings and mountains the farther north you travel from the equator.

You may experience reception problems under the following circumstances: • In a location with an obstruction to the south of

your vehicle.

• In tunnels • On the lower level of a multi-tiered road • Large items carried on the roof rack

2013 CR-V13 CR-V-31T0A6100.book 191 ページ ２０１２年８月１０日　金曜日　午後３時３４分

QRG

Recommended CDs • Use only high-quality CD-R or CD-RW discs labeled for audio use.

• Use only CD-R or CD-RW discs on which the recordings are closed.

• Play only standard round-shaped CDs.

The CD packages or jackets should have one of these marks.

uuGeneral Information on the Audio System uRecommended CDs

1Recommended CDs

A Dual-disc cannot play on this audio unit. If recorded under certain conditions, a CD-R or CD-RW may not play either.

TOC

■ CDs with MP3 or WMA files • Some software files may not allow for audio play or text data display.

• Some versions of MP3 or WMA formats may be unsupported.

Index

Home

Continued

191

2013 CR-V13 CR-V-31T0A6100.book 192 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuGeneral Information on the Audio SystemuRecommended CDs

■ Protecting CDs Follow these precautions when handling or storing CDs: • Store a CD in its case when it is not being played.

• When wiping a CD, use a soft clean cloth from the center to the outside edge.

• Handle a CD by its edge. Never touch either surface.

• Never insert foreign objects into the CD player.

• Keep CDs out of direct sunlight and extreme heat.

• Do not place stabilizer rings or labels on the CD.

• Avoid fingerprints, liquids, and felt-tip pens on the CD.

1Protecting CDs

NOTICE Do not insert a damaged CD. It may be stuck inside and damage the audio unit.

Examples: ● Bubbled, wrinkled, labeled, and

excessively thick CDs

Bubbled/ Wrinkled

With Label/ Sticker

Using Printer Label Kit

Sealed

With Plastic Ring

● Damaged CDs

● Poor quality CDs

Warped

Burrs

Chipped/ Cracked

● Small CDs

3-inch (8-cm) CD

QRG

TOC

Index

Home

192

2013 CR-V13 CR-V-31T0A6100.book 193 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uuGeneral Information on the Audio SystemuCompatible iPod®, iPhone® and USB Flash Drives

QRG

Compatible iPod®, iPhone® and USB Flash Drives ■ iPod® and iPhone® Model Compatibility

Model

iPod (5th generation)

iPod classic 80/160 GB (launched in 2007)

iPod classic 120 GB (launched in 2008) iPod classic 160 GB (launched in 2009)

iPod nano (launched in 2011) iPod touch (launched in 2011)

iPhone 3G/iPhone 3GS/iPhone 4/iPhone 4S

1iPod® and iPhone® Model Compatibility

This system may not work with all software versions of these devices.

■ USB Flash Drives

• Use a recommended USB flash drive of 256 MB or higher.

• Some digital audio players may not be compatible.

• Some USB flash drives (e.g., a device with security lockout) may not work.

• Some software files may not allow for audio play or text data display.

• Some versions of MP3, WMA, or AAC formats may be unsupported.

1USB Flash Drives

Files on the USB flash drive are played in their stored order. This order may be different from the order displayed on your PC or device.

TOC

Index

Home

193

2013 CR-V13 CR-V-31T0A6100.book 194 ページ ２０１２年８月１０日　金曜日　午後３時３４分

Bluetooth® HandsFreeLink®

QRG

TOC

Index

Home

194

Models with navigation system For models with the navigation system, see the Navigation System Manual for how to operate the Bluetooth® HandsFreeLink®.

Models without navigation system Bluetooth® HandsFreeLink® (HFL) allows you to place and receive phone calls using your vehicle's audio system, without handling your cell phone.

Using HFL ■ HFL Buttons

Pick-up Button

Volume up

Microphone

Volume down

Hang-up/Back Button Talk Button

Selector Knob

PHONE Button

(Pick-up) button: Press to go directly to the Phone screen or to answer an

incoming call.

(Hang-up/back) button: Press to end a call or to cancel a command. (Talk) button: Press to call a number with a stored voice tag.

PHONE button: Press to go directly to the Phone screen. Selector knob: Rotate

to select an item on the screen, then press

1Bluetooth® HandsFreeLink®

To use HFL, you need a Bluetooth-compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities: • U.S.: Visit www.handsfreelink.honda.com, or call

1-888-528-7876.

• Canada: Visit www.handsfreelink.ca, or call

1-888-528-7876.

Voice control tips • Aim the vents away from the ceiling and close the windows, as noise coming from them may interfere with the microphone. • Press and release the

button when you want to

call a number using a stored voice tag. Speak clearly and naturally after a beep.

• If the microphone picks up voices other than yours,

the command may be misinterpreted.

• To change the volume level, use the audio system's volume knob or the remote audio controls on the steering wheel.

State or local laws may prohibit the operation of handheld electronic devices while operating a vehicle.

2013 CR-V13 CR-V-31T0A6100.book 195 ページ ２０１２年８月１０日　金曜日　午後３時３４分

QRG

■ HFL Status Display

Bluetooth Indicator Comes on when your phone is connected to HFL.

Roam Status Signal Strength

Battery Level Status HFL Mode

The multi-information display notifies you when there is an incoming call.

TOC

Index

Home

Call Name

■ Limitations for Manual Operation

Certain manual functions are disabled or inoperable while the vehicle is in motion. You cannot select a grayed-out option until the vehicle is stopped.

Only previously stored speed dial entries can be called using voice commands while the vehicle is in motion.

2 Speed Dial P. 211

Disabled Option

uu Bluetooth® HandsFreeLink®uUsing HFL

1Bluetooth® HandsFreeLink®

Bluetooth ® Wireless Technology The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motors Co., Ltd., is under license. Other trademarks and trade names are those of their respective owners.

HFL Limitations An incoming call on HFL will interrupt the audio system when it is playing. It will resume when the call is ended.

1HFL Status Display

The information that appears on the multi- information display varies between phone models.

You can change the system language to English, French, or Spanish.

2 Customized Features P. 84

195

2013 CR-V1HFL Menus

To use HFL, you must first pair your Bluetooth- compatible cell phone to the system while the vehicle is parked.

Some functions are limited while driving. A message appears on the screen when the vehicle is moving and the operation is canceled.

13 CR-V-31T0A6100.book 196 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

QRG

HFL Menus The ignition switch must be in ACCESSORY (q or ON (w to use HFL.

PHONE or

Phone

TOC

Speed Dial*1

Display your speed dial entry lists. (up to 15 entries per paired phone)

Call History*1

Dialed Calls

Display the last 20 outgoing calls.

Received Calls

Display the last 20 incoming calls.

Missed Calls

Display the last 20 missed calls.

Phonebook*1

Display the paired phone’s phonebook.

Dial*1

Enter a phone number to dial.

Index

*1:Appears only when a phone is connected to HFL.

Home

196

2013 CR-V13 CR-V-31T0A6100.book 197 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

QRG

TOC

Index

Home

Redial*1

Redial the last number dialed in the phone’s history.

Text Message

Select a message and

The message is read aloud

Read/Stop reading

System reads received message aloud, or stop message from being read.

Reply

Reply to a received message using one of six fixed phrases.

Call

Make a call to the sender.

Display Message

See an entire received message (if more than three lines of text).

*1:Appears only when a phone is connected to HFL.

Continued

197

2013 CR-V13 CR-V-31T0A6100.book 198 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

Phone Setup

Connection

Add a New Phone

Pair a phone to the system

Connect a Phone

Connect a phone to the system.

Disconnect Phone

Disconnect a paired phone from the system.

Delete a Phone

Delete a previously paired phone.

Pairing Code

Create a code for a paired phone.

QRG

TOC

Index

Home

198

2013 CR-V13 CR-V-31T0A6100.book 199 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

QRG

TOC

Index

Home

Speed Dial*1

Add New

Phonebook

Select a phone number from the phonebook to store as a speed dial number.

Call History

Select a phone number from the call history to store as a speed dial number.

Phone Number

Existing entry list

Change Speed Dial

Enter a phone number to store as a speed dial number.

Change a previously stored speed dial number.

Delete Speed Dial

Delete a previously stored speed dial number.

Store Voice Tag

Create a voice tag for a speed dial number.

Change Voice Tag

Change a voice tag for a speed dial number.

Delete Voice Tag

Delete a voice tag for a speed dial number.

*1:Appears only when a phone is connected to HFL.

Continued

199

2013 CR-V13 CR-V-31T0A6100.book 200 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

QRG

TOC

Index

Home

200

*1:Appears only when a phone is connected to HFL.

Auto Transfer

Set calls to automatically transfer from your phone to HFL when you enter the vehicle.

Caller ID Info

Name Priority

Prioritize the caller’s name as the caller ID.

Number Priority

Prioritize the caller’s phone number as the caller ID.

Passcode*1

Create a security PIN for a paired phone.

Text Message Notice

Turn incoming text message notifications on or off.

System Clear

Clear the system of all paired phones, phonebook entries, and security codes.

2013 CR-V13 CR-V-31T0A6100.book 201 ページ ２０１２年８月１０日　金曜日　午後３時３４分

QRG

■ Phone Setup

■ To pair a cell phone (No phone has

been paired to the system)

1. Press the PHONE button or the

button.

2. Rotate

to select Yes, then press

3. Make sure your phone is in search or

discoverable mode, then press u HFL automatically searches for a

Bluetooth device.

4. When your phone appears on the list, select

it by pressing u If your phone doesn’t appear, select Phone Not Found? and search for Bluetooth devices using your phone. From your phone, select HandsFreeLink.

5. HFL gives you a four-digit pairing code to

input on your phone. When your phone prompts you, input the four-digit pairing code.

6. A notification appears on the screen if

pairing is successful.

TOC

Index

Home

uu Bluetooth® HandsFreeLink®uHFL Menus

1Phone Setup

Your Bluetooth-compatible phone must be paired to HFL before you can make and receive hands-free calls.

Phone Pairing Tips: • You cannot pair your phone while the vehicle is

moving.

• Up to six phones can be paired. • Your phone's battery may drain faster when it is

connected to HFL.

• If your phone is not ready for pairing or not found by the system within three minutes, the system will time out and returns to idle.

Once you have paired a phone, you can see it displayed on the screen with one or two icons on the right side. These icons indicate the following:

: The phone can be used with HFL. : The phone is compatible with Bluetooth® Audio.

Continued

201

2013 CR-V13 CR-V-31T0A6100.book 202 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

■ To pair a cell phone (when a phone has

already been paired to the system)

1. Press the PHONE button or the

button.

2. Rotate

to select Phone Setup, then

press u If a prompt appears asking to connect to

a phone, select No and proceed with step 2.

3. Rotate

to select Connection, then

press

4. Rotate

to select Add a New Phone,

then press u The screen changes to Select Location.

5. Rotate

to select Empty, then press

QRG

TOC

Index

Home

202

2013 CR-V13 CR-V-31T0A6100.book 203 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

QRG

TOC

Index

Home

6. Make sure your phone is in search or

discoverable mode, then press u HFL automatically searches for a

Bluetooth device.

7. When your phone appears on the list, select

it by pressing u If your phone doesn’t appear, select Phone Not Found? and search for Bluetooth devices using your phone. From your phone, select HandsFreeLink.

8. HFL gives you a four-digit pairing code to

input on your phone. When your phone prompts you, input the four-digit pairing code.

9. A notification appears on the screen if

pairing is successful.

Continued

203

2013 CR-V13 CR-V-31T0A6100.book 204 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

■ To change the pairing code setting 1. Press the PHONE button or the

button.

2. Rotate

to select Phone Setup, then

press

1To change the pairing code setting

The default pairing code is “0000” until you change the setting.

To create your own, select Fixed, and delete the current code, then enter a new one.

For a randomly generated pairing code each time you pair a phone, select Random.

3. Rotate

to select Connection, then

press

4. Rotate

press

to select Pairing Code, then

5. Rotate

to select Fixed or Random, then

press

QRG

TOC

Index

Home

204

2013 CR-V13 CR-V-31T0A6100.book 205 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

QRG

TOC

Index

Home

■ To delete a paired phone 1. Press the PHONE button or the

button.

2. Rotate

to select Phone Setup, then

press u Repeat the procedure to select

Connection, then Delete a Phone.

3. Rotate

to select a phone you want to

delete, then press

4. A confirmation message appears on the

to select Yes, then

screen. Rotate press u A notification appears if the deletion is

successful.

Continued

205

2013 CR-V13 CR-V-31T0A6100.book 206 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

■ To Set Up a Text Message Notice Option

1. Press the PHONE button or the

button.

2. Rotate

to select Phone Setup, then

press

1To Set Up a Text Message Notice Option

ON: A pop-up notification comes on every time you receive a new text message.

OFF: The message you receive is stored in the system without notification.

3. Rotate

to select Message Notice, then

press

4. Rotate

to select a mode you want, then

press

QRG

TOC

Index

Home

206

2013 CR-Vuu Bluetooth® HandsFreeLink®uHFL Menus

1To Create a Security PIN

In the phone is already security PIN protected, you need to enter the current security PIN before clearing the PIN or creating a new one.

13 CR-V-31T0A6100.book 207 ページ ２０１２年８月１０日　金曜日　午後３時３４分

QRG

TOC

Index

Home

■ To Create a Security PIN You can protect each of the six cell phones with a security PIN.

1. Press the PHONE button or the

button.

2. Rotate

to select Phone Setup, then

press u Repeat the procedure to select

Passcode.

3. Select a phone you want to add a security

PIN to. u Rotate

to select a phone you want to

add a security PIN to, then press

4. A confirmation message appears on

the screen. u Rotate

to select Yes, then press

5. Enter a new four-digit number.

u Rotate

to select, then press

. Press

to delete. Press

to enter the

security PIN.

6. Re-enter the four-digit number.

u The screen returns to the screen in

step 2.

Continued

207

2013 CR-V13 CR-V-31T0A6100.book 208 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

QRG

TOC

Index

Home

208

■ Automatic Transferring If you get into the vehicle while you are on the phone, the call can be automatically transferred to HFL.

1. Press the PHONE button or the

button.

2. Rotate

to select Phone Setup, then

press u Repeat the procedure to select Auto

Transfer.

3. Rotate

to select On, then press

4. A notification appears on the screen if the

change is successful.

■ Caller’s ID Information You can select a caller’s information to be displayed when you have an incoming call.

1. Press the PHONE button or the

button.

2. Rotate

to select Phone Setup, then

press u Repeat the procedure to select Caller ID

Info.

3. Rotate

to select a mode you want, then

press

4. A notification appears on the screen if the

change is successful.

1Caller’s ID Information

Name Priority mode: A caller’s name is displayed if it is stored in the phonebook. Number Priority mode: A caller’s phone number is displayed.

2013 CR-V13 CR-V-31T0A6100.book 209 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

■ To Clear the System Security codes, paired phones, all stored voice tags, all speed dial entries, and all imported phonebook data are erased.

1. Press the PHONE button or the

button.

2. Rotate

to select Phone Setup, then

press u Repeat the procedure to select System

Clear.

3. Rotate

to select Yes, then press

4. A confirmation message appears on the

screen. Rotate press

to select Yes, then

5. A confirmation message appears on the

screen. Rotate

to finish.

QRG

TOC

Index

Home

Continued

209

2013 CR-V13 CR-V-31T0A6100.book 210 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

■ Automatic Import of Cellular Phonebook and Call History When your phone is paired, the contents of its phonebook and call history are automatically imported to HFL.

1Automatic Import of Cellular Phonebook and Call History

When you select a person from the list in the cellular phonebook, you can see up to three category icons. The icons indicate what types of numbers are stored for that name.

Pref

Home

Mobile

Work

Pager

Fax

Car

Message

Other

Voice

If a name has four or more numbers, ∙∙∙ appears instead of category icons.

On some phones, it may not be possible to import the category icons to HFL.

The phonebook is updated after every connection. Call history is updated after every connection or call.

QRG

TOC

Index

Home

210

2013 CR-V13 CR-V-31T0A6100.book 211 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

1Speed Dial

You can use the audio preset buttons during a call to store a speed dial number: 1. Press and hold the desired audio preset button

during a call.

2. The contact information for the active call will be

stored for the corresponding speed dial.

When a voice tag is stored, you can press the

button and call the number using voice commands.

■ Speed Dial Up to 15 speed dial numbers can be stored per phone.

To store a speed dial number: 1. Press the PHONE button or the

button.

2. Rotate

to select Phone Setup, then

press u Repeat the procedure to select Speed

Dial, then Add New.

3. Rotate

to select a place to choose a

number from, then press By Phonebook: u Select a number from the linked cell

phone’s imported phonebook.

By Call History: u Select a number from the call history. By Phone Number: u Input the number manually.

4. When the speed dial is successfully stored, you are asked to create a voice tag for the number. Rotate then press

to select Yes or No,

5. Using the

button, follow the prompts to

say the name for the speed dial entry.

Continued

211

QRG

TOC

Index

Home

2013 CR-V13 CR-V-31T0A6100.book 212 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

QRG

TOC

Index

Home

212

1Speed Dial

Avoid using duplicate voice tags.

Avoid using “home” as a voice tag. It is easier for HFL to recognize a longer name. For example, use “John Smith” instead of “John.”

■ To add a voice tag to a stored speed

dial number

1. Press the PHONE button or the

button.

2. Rotate

to select Phone Setup, then

press u Repeat the procedure to select Speed

Dial.

3. Select an existing speed dial entry.

4. Rotate

to select Store Voice Tag, then

press

5. Using the

button, follow the prompts to

complete the voice tag.

■ To delete a voice tag 1. Press the PHONE button or the

button.

2. Rotate

to select Phone Setup, then

press u Repeat the procedure to select Speed

Dial.

3. Select an existing speed dial entry.

4. Rotate

to select Delete Voice Tag,

then press u A confirmation message appears on the

to select Yes, then

screen. Rotate press

2013 CR-V13 CR-V-31T0A6100.book 213 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

QRG

TOC

Index

Home

■ To delete a speed dial number 1. Press the PHONE button or the

button.

2. Rotate

to select Phone Setup, then

press u Repeat the procedure to select Speed

Dial.

3. Select an existing speed dial entry.

4. Rotate

to select Delete Speed Dial,

then press u A confirmation message appears on the

screen. Rotate press

to select Yes, then

■ Making a Call You can make calls by inputting any phone number, or by using the imported phonebook, call history, speed dial entries, or redial.

1Making a Call

Any voice-tagged speed dial entry can be dialed by voice from any screen. Press the

button and follow the prompts.

The maximum range between your phone and vehicles is 30 feet (10 meters).

Once a call is connected, you can hear the voice of the person you are calling through the audio speakers.

Continued

213

2013 CR-V13 CR-V-31T0A6100.book 214 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

QRG

TOC

Index

Home

214

■ To make a call using the imported

1To make a call using the imported phonebook

This function is disabled while the vehicle is moving. However, you can call a stored voice-tagged speed dial number using voice commands.

2 Limitations for Manual Operation P. 195
2 Speed Dial P. 211

phonebook

When your phone is paired, the contents of its phonebook are automatically imported to HFL. 1. Press the PHONE button or the

button.

2. Rotate

press

to select Phonebook, then

3. The phonebook is stored alphabetically.

Rotate press

to select the initial, then

4. Rotate

to select a name, then press

to select a number, then

5. Rotate press u Dialing starts automatically.

■ To make a call using a phone number 1. Press the PHONE button or the

button.

2. Rotate

to select Dial, then press

3. Rotate press

to select a number, then

4. Rotate

to select

, then press

u Dialing starts automatically.

1To make a call using a phone number

This function is disabled while the vehicle is moving. However, you can call a stored voice-tagged speed dial number using voice commands.

2 Limitations for Manual Operation P. 195
2 Speed Dial P. 211

2013 CR-V13 CR-V-31T0A6100.book 215 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

QRG

TOC

Index

Home

■ To make a call using redial 1. Press the PHONE button or the

button.

2. Rotate

to select Redial, then press

u Dialing starts automatically.

■ To make a call using the call history Call history is stored by Dialed Calls, Received Calls, and Missed Calls. 1. Press the PHONE button or the

button.

2. Rotate

to select Call History, then

press

3. Rotate

to select Dialed Calls, Received

Calls, or Missed Calls, then press

to select a number, then

4. Rotate press u Dialing starts automatically.

■ To make a call using a speed dial entry 1. Press the PHONE button or the button.

2. Rotate

to select Speed Dial, then

press

3. Rotate

to select a number, then

press u Dialing starts automatically.

Continued

1To make a call using the call history

The call history appears only when a phone is connected to HFL, and displays the last 20 dialed, received, or missed calls.

1To make a call using a speed dial entry

On the Phone screen, the first six speed dials on the list can be directly selected by pressing the corresponding audio preset buttons (1-6).

Select More Speed Dial Lists to view another paired phone’s speed dial list.

When a voice tag is stored, press the call the number using voice commands.

button and

2 Speed Dial P. 211

Any voice-tagged speed dial entry can be dialed by voice from any screen. Press the

button and follow the prompts.

215

2013 CR-V13 CR-V-31T0A6100.book 216 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

■ Receiving a Call

HFL Mode

Caller Name

When there is an incoming call, an audible notification sounds (if activated) and the Incoming Call screen appears.

Press the

button to answer the call.

Press the

button to decline or end the call.

1Receiving a Call Call Waiting Press the answer the incoming call.

button to put the current call on hold to

Press the call.

button again to return to the current

Ignore the incoming call if you do not want to answer it.

Press the current call.

button if you want to hang up the

QRG

TOC

Index

Home

216

2013 CR-V13 CR-V-31T0A6100.book 217 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

1Options During a Call

Touch Tones: Available on some phones.

■ Options During a Call The following options are available during a call. Mute: Mute your voice. Transfer Call: Transfer a call from HFL to your phone. Touch Tones: Send numbers during a call. This is useful when you call a menu- driven phone system.

1. To view the available options, press the

PHONE button.

2. Rotate

to select the option, then

press u The check box is checked when Mute is selected. Select Mute again to turn it off.

Continued

217

QRG

TOC

Index

Home

2013 CR-V13 CR-V-31T0A6100.book 218 ページ ２０１２年８月１０日　金曜日　午後３時３４分

uu Bluetooth® HandsFreeLink®uHFL Menus

■ Receiving a Text Message HFL can display newly received text messages as well as 20 of the most recently received messages on a connected cell phone. Each received message can be read aloud and replied to using a fixed common phrase.

1. A pop-up appears and notifies you of a new

text message.

2. Rotate

to select Yes to listen to the

message, then press u The text message is displayed. The

system automatically starts reading out the message.

3. To discontinue the message read-out, press

the

button.

1Receiving a Text Message

The system does not display any received messages while you are driving. You can only hear them read aloud.

With some phones, you may be able to display up to 20 most recent text messages.

Only the first three lines of the received message are displayed with this option.

2 Displaying an entire message P. 222

QRG

TOC

Index

Home

218

2013 CR-V13 CR-V-31T0A6100.book 219 ページ ２０１２年８月１０日　金曜日　午後３時３４分

■ Displaying Messages

1. Press the PHONE button or the

button.

2. Rotate

to select Text Message, then

press

uu Bluetooth® HandsFreeLink®uHFL Menus

1Displaying Messages

The

icon appears next to an unread message.

Only the first three lines of the received message are displayed with this option.

2 Displaying an entire message P. 222

If you delete a message on the phone, the message disappears from the system. If you send a message from the system, the message goes to your phone.

to select a message, then

3. Rotate press u The text message is displayed. The

system automatically starts reading the message aloud.

Continued

219

QRG

TOC