Download PDF Manual

side marker, tail, and rear license plate lights


TOC


Index


Home


112


1Light Switches


If you remove the key from the ignition switch while the lights are on, a chime sounds when the driver’s door is opened.


Do not leave the lights on when the engine is off because it will cause the battery to discharge.


Rotating the light switch turns the lights on and off, regardless of the position of the ignition switch. ■ High beams Push the lever forward until you hear a click. ■ Low beams When in high beams, pull the lever back to return to low beams. ■ Flashing the high beams Pull the lever back, and release it.


2013 CR-V 13 CR-V-31T0A6100.book 113 ページ 2012年8月10日 金曜日 午後3時34分


uuOperating the Switches Around the Steering WheeluLight Switches


QRG


TOC


Index


Home


■ Automatic Lighting Control*


Automatic lighting control can be used when the ignition switch is in ON (w.


When you turn the light switch to AUTO, the headlights and other exterior lights will switch on and off automatically depending on the ambient brightness.


u You can change the auto light


sensitivity setting.


2 Customized Features P. 84


1Automatic Lighting Control*


We recommend that you turn on the lights manually when driving at night, in a dense fog, or in dark areas such as long tunnels or parking facilities.


The light sensor is in the location shown below. Do not cover this light sensor with anything; otherwise, the automatic lighting system may not work properly.


Light Sensor


■ Automatic Lighting Off Feature The headlights, all other exterior lights, and the instrument panel lights turn off within 15 seconds after you remove the key and close the driver's door.


uYou can change the headlight auto off timer setting. 2 Customized Features P. 84


If you turn the ignition switch to LOCK (0 with the headlight switch on, but do not open the door, the lights turn off after 10 minutes (three minutes, if the switch is in the AUTO position).


The lights turn on again when you unlock or open the driver's door. If you unlock the door, but do not open it within 15 seconds, the lights go off. If you open the driver's door, you will hear a lights on reminder chime.


Adjust the auto light sensitivity as follows:


Setting


The exterior lights come on when the ambient light is at


Max High Mid Low Min


Bright


Dark


* Not available on all models


113


2013 CR-V 13 CR-V-31T0A6100.book 114 ページ 2012年8月10日 金曜日 午後3時34分


uuOperating the Switches Around the Steering WheeluFog Lights*


Fog Lights*


QRG


Can be used when the low beam headlights are on.


Rotate the switch up from the OFF position to the


position.


1Fog Lights*


When the fog lights are on, the indicator in the instrument panel will be on.


The fog lights go off when the headlights turn off, or when the daytime running lights are on.


TOC


Index


Home


114


Fog Light Switch


Daytime Running Lights The high beam headlights come on slightly dimmer than normal when the following conditions have been met: • The ignition switch is in ON (w.


• The headlight switch is off, or in


• The parking brake is released.


The lights remain on even if you set the parking brake. Turning off the ignition switch will turn off the daytime running lights.


The high beam headlights return to the original brightness once the headlight switch is turned on.


* Not available on all models


2013 CR-V 13 CR-V-31T0A6100.book 115 ページ 2012年8月10日 金曜日 午後3時34分


uuOperating the Switches Around the Steering WheeluWipers and Washers


QRG


Wipers and Washers ■ Windshield Wipers/Washers


The windshield wipers and washers can be used when the ignition switch is in ON (w.


■ MIST The wipers run at high speed until you release the lever.


■ Wiper switch (OFF, INT, LO, HI) Change the wiper switch setting according to the amount of rain.


■ Adjusting the delay * Turn the adjustment ring to adjust the wiper delay.


Long delay


Short delay


■ Washer Sprays while you pull the lever toward you. When you release the lever, the wipers make two or three more sweeps before stopping.


Pull to use washer.


Intermittent Time Adjustment Ring *


MIST OFF INT: Low speed with intermittent LO: Low speed wipe HI: High speed wipe


TOC


Index


Home


1Wipers and Washers


NOTICE Do not use the wipers when the windshield is dry. The windshield will get scratched, or the rubber blades will get damaged.


NOTICE In cold weather, the blades may freeze to the windshield, becoming stuck.


Operating the wipers in this condition may damage the wipers. Use the defroster to warm the windshield, then turn the wipers on.


Turn the washers off if no washer fluid comes out. The pump may get damaged.


Models with intermittent time adjustment ring If the vehicle speeds up while the wipers are operating intermittently, the length of the wipe interval shortens. When the vehicle starts moving, the wipers make a single sweep. When the vehicle speeds up, the wiper operation’s shortest delay setting ( the same.


) and the LO setting become


* Not available on all models


Continued


115


2013 CR-V 1Wipers and Washers


If the wiper stops operating due to any obstacle such as the build-up of snow, park the vehicle in a safe place. Rotate the wiper switch to OFF, and turn the ignition switch to ACCESSORY (q or LOCK (0, then remove the obstacle.


The wiper motor is equipped with a breaker that may stop motor operation temporarily to prevent an overload. Wiper operation resumes within a few minutes, once the circuit has returned to normal.


13 CR-V-31T0A6100.book 116 ページ 2012年8月10日 金曜日 午後3時34分


uuOperating the Switches Around the Steering WheeluWipers and Washers


■ Rear Wiper/Washer


INT: Intermittent ON: Continuous wipe OFF Washer


The rear wiper and washer can be used when the ignition switch is in ON (w.


■ Wiper switch (OFF, INT, ON) Change the wiper switch setting according to the amount of rain.


■ Washer ( Sprays while you rotate the switch to this position.


Hold it to activate the wiper and to spray the washer. Once released, it stops operating after a few more sweeps.


■ Operating in reverse When you shift the transmission to (R with the windshield wipers activated, the rear wiper operates automatically as follows even if its switch is off.


Front Wiper Position


Rear Wiper Operation


INT (Intermittent)


LO (Low speed wipe) HI (High speed wipe)


Intermittent


Continuous


QRG


TOC


Index


Home


116


2013 CR-V 13 CR-V-31T0A6100.book 117 ページ 2012年8月10日 金曜日 午後3時34分


uuOperating the Switches Around the Steering WheeluBrightness Control


Brightness Control


QRG


Control Knob


When the parking lights are turned on and the ignition switch is in ON (w, you can use the brightness control knob to adjust instrument panel brightness. Brighten: Turn the knob to the right.


Dim: Turn the knob to the left.


You will hear a beep when the brightness reaches minimum or maximum. The information display will return to its original state several seconds after you adjust the brightness.


■ Brightness level indicator The brightness level is shown on the information display while you are adjusting it.


1Brightness Control


Instrument panel brightness differs between when the exterior lights are on and when they are off. The instrument panel dims to reduce glare when the lights are on.


Pressing the display.


(Select/Reset) knob switches the


If you turn the knob to the right until the brightness display is up to max, the beeper sounds. This cancels the reduced instrument panel brightness when the exterior lights are on.


117


TOC


Index


Home


2013 CR-V 13 CR-V-31T0A6100.book 118 ページ 2012年8月10日 金曜日 午後3時34分


uuOperating the Switches Around the Steering WheeluRear Defogger/Heated Door Mirror* Button


1Rear Defogger/Heated Door Mirror * Button


NOTICE When cleaning the inside of the rear window, be careful not to damage the heating wires. It is critical to wipe the window from side to side along the defogger heating wires.


This system consumes a lot of power, and may weaken the battery, making it difficult to start the engine. Turn it off when the window has been defogged.


Also, do not use the system for a long period even if the engine is idling.


QRG


Rear Defogger/Heated Door Mirror* Button Press the rear defogger and heated door mirror button to defog the rear window and mirrors when the ignition switch is in ON (w.


Models with heating and cooling system The rear defogger and heated door mirrors automatically switch off after 20 minutes. However, if the outside temperature is 18°F (−8°C) or below, they do not automatically switch off.


Models with climate control system The rear defogger and heated door mirrors automatically switch off after 10-30 minutes depending on the outside temperature. However, if the outside temperature is 32°F (0°C) or below, they do not automatically switch off.


TOC


Index


Home


118


* Not available on all models


2013 CR-V 13 CR-V-31T0A6100.book 119 ページ 2012年8月10日 金曜日 午後3時34分


uuOperating the Switches Around the Steering WheeluAdjusting the Steering Wheel


QRG


Adjusting the Steering Wheel The steering wheel height and distance from your body can be adjusted so that you can comfortably grip the steering wheel in an appropriate driving posture.


To adjust


To lock


Lever


1. Pull the steering wheel adjustment lever up.


u The steering wheel adjustment lever is


under the steering column.


2. Move the steering wheel up or down, and


in or out. u Make sure you can see the instrument


panel gauges and indicators.


3. Push the steering wheel adjustment lever


down to lock the steering wheel in position. u After adjusting the position, make sure


you have securely locked the steering wheel in place by trying to move it up, down, in, and out.


TOC


Index


Home


1Adjusting the Steering Wheel


3WARNING


Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in a crash.


Adjust the steering wheel only when the vehicle is stopped.


Make any steering wheel adjustments before you start driving.


119


2013 CR-V 13 CR-V-31T0A6100.book 120 ページ 2012年8月10日 金曜日 午後3時34分


Adjusting the Mirrors


QRG


Interior Rearview Mirror Adjust the angle of the rearview mirror when you are sitting in the correct driving position.


■ Rearview Mirror with Day and Night Positions*


TOC


Daytime Position


Tab


Up


Flip the tab to switch the position. The night position will help to reduce the glare from headlights behind you when driving after dark.


Down


Night Position


1Adjusting the Mirrors


Keep the inside and outside mirrors clean and adjusted for best visibility.


Adjust the mirrors before you start driving. 2 Adjusting the Seat Positions P. 122


■ Automatic Dimming Rearview Mirror*


Reduces the glare from headlights behind you when driving after dark. Press the auto button to turn this function on and off. When activated, the auto indicator comes on.


1Automatic Dimming Rearview Mirror*


The auto dimming function cancels when the shift position is in (R.


Indicator


Auto Button


Sensor


Index


Home


120


* Not available on all models


2013 CR-V 13 CR-V-31T0A6100.book 121 ページ 2012年8月10日 金曜日 午後3時34分


Power Door Mirrors


QRG


uuAdjusting the MirrorsuPower Door Mirrors


Adjustment Switch


Selector Switch


You can adjust the door mirrors when the ignition switch is in ON (w.


■ Mirror position adjustment L/R selector switch: Select the left or right mirror. After adjusting the mirror, return the switch to the center position.


Mirror position adjustment switch: Press the switch left, right, up, or down to move the mirror.


■ Expanded View Driver's Mirror


Inner Segment


Outer Segment


The driver side door mirror has outer and inner segments.


The outer segment is slightly curved to provide a wider angle view than a standard flat mirror. This wider view may help you check areas that are not visible using a standard door mirror.


1Expanded View Driver's Mirror


Objects visible in the outer segment of the driver side door mirror appears smaller than objects in the rest of the mirror. But in fact, they are closer than they appear.


Do not rely on your mirrors. Always look to the side and behind your vehicle before changing lanes.


TOC


Index


Home


121


2013 CR-V 13 CR-V-31T0A6100.book 122 ページ 2012年8月10日 金曜日 午後3時34分


Adjusting the Seats


Adjusting the Seat Positions


QRG


Allow sufficient space.


Adjust the driver's seat as far back as possible while allowing you to maintain full control of the vehicle. You should be able to sit upright, well back in the seat and be able to adequately press the pedals without leaning forward, and grip the steering wheel comfortably. The passenger's seat should be adjusted in a similar manner, so that it is as far back from the front airbag in the dashboard as possible.


1Adjusting the Seats


3WARNING


Sitting too close to a front airbag can result in serious injury or death if the front airbags inflate.


Always sit as far back from the front airbags as possible while maintaining control of the vehicle.


Move back.


■ Adjusting the driver’s power seat *


Horizontal Position Adjustment


Height Adjustment


* Not available on all models


The National Highway Traffic Safety Administration and Transport Canada recommend that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest.


Always make seat adjustments before driving.


Lumbar Support Adjustment


Seat-back Angle Adjustment


TOC


Index


Home


122


2013 CR-V 13 CR-V-31T0A6100.book 123 ページ 2012年8月10日 金曜日 午後3時34分


■ Adjusting the front manual seat(s)


Height Adjustment (Driver side only) Pull up or push down the lever to raise or lower the seat.


uuAdjusting the SeatsuAdjusting the Seat Positions


1Adjusting the front manual seat(s)


Once a seat is adjusted correctly, rock it back and forth to make sure it is locked in position.


Horizontal Position Adjustment Pull up on the bar to move the seat, then release the bar.


Seat-back Angle Adjustment Pull up the lever to change the angle.


QRG


TOC


Index


Home


Continued


123


2013 CR-V 13 CR-V-31T0A6100.book 124 ページ 2012年8月10日 金曜日 午後3時34分


uuAdjusting the SeatsuAdjusting the Seat Positions


■ Adjusting the Seat-Backs


Adjust the driver's seat-back to a comfortable, upright position, leaving ample space between your chest and the airbag cover in the center of the steering wheel.


The front seat passenger should also adjust their seat-back to a comfortable, upright position.


Reclining a seat-back so that the shoulder part of the belt no longer rests against the occupant's chest reduces the protective capability of the belt. It also increases the chance of sliding under the belt in a crash and being seriously injured. The farther a seat-back is reclined, the greater the risk of injury.


1Adjusting the Seat-Backs


3WARNING


Reclining the seat-back too far can result in serious injury or death in a crash.


Adjust the seat-back to an upright position, and sit well back in the seat.


Do not put a cushion, or other object, between the seat-back and your back.


Doing so may interfere with proper seat belt or airbag operation.


If you cannot get far enough away from the steering wheel and still reach the controls, we recommend that you investigate whether some type of adaptive equipment may help.


QRG


TOC


Index


Home


124


2013 CR-V 13 CR-V-31T0A6100.book 125 ページ 2012年8月10日 金曜日 午後3時34分


■ Adjusting the Head Restraints


Your vehicle is equipped with head restraints in all seating positions.


Head restraints are most effective for protection against whiplash and other rear- impact crash injuries when the center of the back of the occupant's head rests against the center of the restraint. The tops of the occupant's ears should be level with the center height of the restraint.


Position head in the center of the head restraint.


■ Adjusting the front head restraint positions


To raise the head restraint: Pull it upward.


To lower the head restraint: Push it down while pressing the release button.


uuAdjusting the SeatsuAdjusting the Seat Positions


1Adjusting the Head Restraints


3WARNING


Improperly positioning head restraints reduces their effectiveness and increases the likelihood of serious injury in a crash.


Make sure head restraints are in place and positioned properly before driving.


In order for the head restraint system to work properly: • Do not hang any items on the head restraints, or


from the restraint legs.


• Do not place any objects between an occupant and


the seat-back.


• Install each restraint in its proper location.


QRG


TOC


Index


Home


Continued


125


2013 CR-V 13 CR-V-31T0A6100.book 126 ページ 2012年8月10日 金曜日 午後3時34分


uuAdjusting the SeatsuAdjusting the Seat Positions


■ Changing the Rear Center Seat Head Restraint Position


A passenger sitting in the center back seating position should adjust the height of their head restraint to an appropriate position before the vehicle begins moving. To raise the head restraint: Pull it upward.


To lower the head restraint: Push it down while pressing the release button.


■ Removing and Reinstalling the Head Restraints Front and rear center head restraints Head restraints can be removed for cleaning or repair.


To remove the head restraint: Pull the restraint up as far as it will go. Then push the release button, and pull the restraint up and out.


To reinstall the head restraint: Insert the legs back in place, then adjust the head restraint to an appropriate height while pressing the release button. Pull up on the restraint to make sure it is locked in position.


1Removing and Reinstalling the Head Restraints 3WARNING


Failure to reinstall, or correctly reinstall, the head restraints can result in severe injury during a crash.


Always replace the head restraints before driving.


QRG


TOC


Index


Home


126


2013 CR-V 13 CR-V-31T0A6100.book 127 ページ 2012年8月10日 金曜日 午後3時34分


uuAdjusting the SeatsuAdjusting the Seat Positions


■ Folding Down the Rear Outer Head Restraint


Strap


A passenger in an outer back seating position should put the head restraint in the upright position before the vehicle begins moving.


To fold down the head restraint: Pull the strap.


To put the head restraint back in the upright position: Pull up the head restraint and push rearward until it latches.


QRG


TOC


Index


Home


Continued


127


2013 CR-V 13 CR-V-31T0A6100.book 128 ページ 2012年8月10日 金曜日 午後3時34分


uuAdjusting the SeatsuAdjusting the Seat Positions


■ Maintain a Proper Sitting Position After all occupants have adjusted their seats and head restraints, and put on their seat belts, it is very important that they continue to sit upright, well back in their seats, with their feet on the floor until the vehicle is safely parked and the engine is off.


Sitting improperly can increase the chance of injury during a crash. For example, if an occupant slouches, lies down, turns sideways, sits forward, leans forward or sideways, or puts one or both feet up, the chance of injury during a crash is greatly increased.


In addition, an occupant who is out of position in the front seat can be seriously or fatally injured in a crash by striking interior parts of the vehicle or being struck by an inflating front airbag.


1Maintain a Proper Sitting Position


3WARNING


Sitting improperly or out of position can result in serious injury or death in a crash.


Always sit upright, well back in the seat, with your feet on the floor.


QRG


TOC


Index


Home


128


2013 CR-V uuAdjusting the SeatsuRear Seats


1Folding Down the Rear Seats


Make sure all items in the cargo area or items extending to the rear seats are properly secured. Loose items can fly forward if you have to brake hard.


Remove any items from the rear seat cushion and floor before you fold down the rear seat.


Make sure the seat-back completely lowers (a click sounds). Otherwise it will not re-latch when returned to the upright position.


The front seat(s) must be far enough forward so they do not interfere with the rear seats as they fold down.


13 CR-V-31T0A6100.book 129 ページ 2012年8月10日 金曜日 午後3時34分


QRG


Rear Seats ■ Folding Down the Rear Seats The rear seats can be folded down separately to allow for additional storage space.


■ To fold down the seat 1. Store the center seat belt first. Insert the latch plate into the slot on the side of the


anchor buckle.


2. Retract the seat belt into the holder on the ceiling.


2 Seat Belt with Detachable Anchor P. 34


3. Lower the center head restraint to its lowest position. Put the armrest back into


the seat-back.


Pull


Lever


From the rear door side 4. Pull the release strap.


u The seat cushion flips forward, the head


restraints tilt downward, and the seat- back then folds flat.


From the cargo area side 4. Pull the release lever.


u The seat cushion flips forward, the head


restraints tilt downward, and the seat- back then folds flat.


TOC


Index


Home


Continued


129


2013 CR-V 13 CR-V-31T0A6100.book 130 ページ 2012年8月10日 金曜日 午後3時34分


uuAdjusting the SeatsuRear Seats


■ To return the seat to the original


1To return the seat to the original position


position


1. Pull the seat-back up and push back into


place until a click is heard.


Make sure the seat-back, head restraints and seat cushion are securely latched back into place before driving.


2. Push the head restraint up to its original


position.


3. Pull the seat cushion up and push it down


into its original position.


■ Rear Seat-back Adjusting


Pull the lever on the right to change the angle of the right half of the seat-back, and left for the left half.


QRG


TOC


Index


Home


130


2013 CR-V 13 CR-V-31T0A6100.book 131 ページ 2012年8月10日 金曜日 午後3時34分


QRG


Armrest ■ Using the Front Seat Armrest*


Pull down the armrest.


uuAdjusting the SeatsuArmrest


■ Using the Rear Seat Armrest


Pull down the armrest in the center seat-back.


TOC


Index


Home


* Not available on all models


131


2013 CR-V 13 CR-V-31T0A6100.book 132 ページ 2012年8月10日 金曜日 午後3時34分


Interior Lights/Interior Convenience Items


QRG


Interior Lights ■ Interior Light Switches


Front


Off


Door Activated Position


Rear and Cargo Area


On


Off


Door Activated Position


■ Map Lights


TOC


Index


Home


132


■ ON The interior lights come on regardless of whether the doors are open or closed. ■ Door activated The interior lights come on in the following situations: • When any of the doors are opened. • You unlock the driver's door. • You rem ove the key from the


ignition switch.


Only the cargo area light comes on when the tailgate is opened. ■ OFF The interior lights remain off regardless of whether the doors are open or closed.


The map lights can be turned on and off by pressing the lenses.


1Interior Light Switches


In the door activated position, the interior lights fade out and go off about 30 seconds after the doors are closed. The lights go off after 30 seconds in the following situations: • When you unlock the driver's door but do not open


it.


• When you remove the key from the ignition switch


but do not open a door.


You can change the interior lights dimming time.


2 Customized Features P. 84


The interior lights go off immediately in the following situations: • When you lock the driver's door. • When you close the driver's door with the key in


the ignition switch.


• When you turn the ignition switch to ON (w.


If you leave any of the doors open without the key in the ignition switch, the interior lights go off after about 15 minutes.


1Map Lights


When the interior light switch is in the door activated position and any door is open, pressing the lens does not turn off the map light.


2013 CR-V 13 CR-V-31T0A6100.book 133 ページ 2012年8月10日 金曜日 午後3時34分


uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items


QRG


Interior Convenience Items ■ Glove Box


Pull the handle to open the glove box. You can lock the glove box with the master key.


To Lock


Glove Box


TOC


■ Console Compartment


Slide the lid using the release knob to open or close the console compartment.


1Glove Box


3WARNING


An open glove box can cause serious injury to your passenger in a crash, even if the passenger is wearing the seat belt.


Always keep the glove box closed while driving.


Index


Home


Continued


133


2013 CR-V 13 CR-V-31T0A6100.book 134 ページ 2012年8月10日 金曜日 午後3時34分


uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items


■ Beverage Holders


■ Front seat beverage holders Are located in the console between the front seats.


1Beverage Holders


NOTICE Spilled liquids can damage the upholstery, carpeting, and electrical components in the interior.


Be careful when you are using the beverage holders. Hot liquid can scald you.


■ Rear seat beverage holders Fold the armrest down to use the rear seat beverage holders.


QRG


TOC


Index


Home


134


2013 CR-V 13 CR-V-31T0A6100.book 135 ページ 2012年8月10日 金曜日 午後3時34分


uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items


■ Accessory Power Sockets The accessory power sockets can be used when the ignition switch is in ACCESSORY (q or ON (w.


■ Accessory power socket on the


console panel


Open the cover to use it.


■ Accessory pow er socket in the


console compartment *


Open the console lid and the cover to use it.


1Accessory Power Sockets


NOTICE Do not insert an automotive type cigarette lighter element. This can overheat the power socket.


The accessory power socket is designed to supply power for 12 volt DC accessories that are rated 180 watts or less (15 amps).


To prevent battery drain, only use the power socket with the engine running.


When both sockets are being used, the combined power rating of the accessories should not exceed 180 watts (15 amps).


QRG


TOC


Index


Home


* Not available on all models


Continued


135


2013 CR-V 13 CR-V-31T0A6100.book 136 ページ 2012年8月10日 金曜日 午後3時34分


uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items


QRG


■ Coat Hook


There is a coat hook on the rear left grab handle. Pull it down to use it.


1Coat Hook


The coat hook is not designed for large or heavy items.


■ Cargo Side Net


Use the cargo side net to secure items to the side.


TOC


Index


Home


136


2013 CR-V 13 CR-V-31T0A6100.book 137 ページ 2012年8月10日 金曜日 午後3時34分


■ Tie-down Anchors


Hooks


Hooks


■ Cargo Hooks


Hook


QRG


TOC


Index


Home


uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items


The tie-down anchors on the cargo area floor can be used to install a net for securing items.


Do not let anyone access items in the cargo area while driving. Loose items can cause injury if you have to brake hard.


1Tie-down Anchors


The cargo hooks on both sides of the cargo area can be used to hang a light items.


1Cargo Hooks


NOTICE Do not hang a large object or an object that weighs more than 6lbs (3kg) on the side cargo hooks. Hanging heavy or large objects may damage the hooks.


Continued


137


2013 CR-V 13 CR-V-31T0A6100.book 138 ページ 2012年8月10日 金曜日 午後3時34分


uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items


■ Sunglasses Holder


To open the sunglasses holder, press and release the indent. To close, press it again until it latches.


Press


You can store eyeglasses and other small items in this holder.


1Sunglasses Holder


Keep the holder closed while driving except when accessing stored items.


■ Conversation mirror The sunglasses holder comes with a mirror. Open the sunglasses holder fully, then push it back to the first detent.


You can use the mirror to view the rear seats.


QRG


TOC


Index


Home


138


2013 CR-V 13 CR-V-31T0A6100.book 139 ページ 2012年8月10日 金曜日 午後3時34分


uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items


■ Seat Heaters*


The ignition switch must be in ON (w to use the seat heaters. The HI setting heats the seats faster than the LO setting.


The indicator for your setting comes on while the seat heater is in use. Press the button on the opposite side to turn the heater off. The indicator goes off.


While in HI, the heater cycles on and off. When a comfortable temperature is reached, select LO to keep the seat warm.


1Seat Heaters*


3WARNING


Heat induced burns are possible when using seat heaters.


Persons with a diminished ability to sense temperature (e.g., persons with diabetes, lower-limb nerve damage, or paralysis) or with sensitive skin should not use seat heaters.


Do not use the seat heaters even in LO when the engine is off. Under such conditions, the battery may be weakened, making the engine difficult to start.


In the LO setting, the heater runs continuously and does not automatically turn off.


QRG


TOC


Index


Home


* Not available on all models


Continued


139


2013 CR-V 13 CR-V-31T0A6100.book 140 ページ 2012年8月10日 金曜日 午後3時34分


uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items


The tonneau cover can be used to conceal items in the cargo area and protect them from direct sunlight.


■ To extend: Pull the handle on the center edge, then clip the mounting rods in the hooks on both sides of the tailgate opening.


■ To retract: Slip the rods out of the hooks, then slowly roll it back until it is completely retracted.


1Tonneau Cover*


Do not let anyone access items in the cargo area while driving. Loose items can cause injury if you have to brake hard.


Do not stack objects higher than the top of the seat in the cargo area. They could block your view and be thrown about the vehicle during a sudden stop.


To prevent tonneau cover damage: • Do not place items on the tonneau cover. • Do not put weight on the tonneau cover.


■ To remove: Push either end of the housing inward, then lift it out of its position.


QRG


TOC


Index


Home


140


■ Tonneau Cover*


Handle


Mounting Rod


Hook


* Not available on all models


2013 CR-V 13 CR-V-31T0A6100.book 141 ページ 2012年8月10日 金曜日 午後3時34分


uuInterior Lights/Interior Convenience ItemsuInterior Convenience Items


■ To store: The housing unit can be stored on the cargo area floor to make more space available.


Push one end of the unit into the hole on one side panel, then insert the other end into the hole on the other side.


After storing the unit, rock it up and down to make sure it is securely placed.


QRG


TOC


Index


Home


141


2013 CR-V 13 CR-V-31T0A6100.book 142 ページ 2012年8月10日 金曜日 午後3時34分


Heating and Cooling System *


Using Vents, Heating and A/C


QRG


Mode Buttons Change airflow. Floor and defroster vents Floor vents Dashboard and floor vents Dashboard vents


Fan Control Dial Adjusts the fan speed. Rotate the dial all the way to OFF to turn everything off.


Button


Turns on the A/C, selects airflow from the dashboard vents, and switches the mode to recirculation.


A/C Button Press to cool the interior or dehumidify while heating.


* Not available on all models


TOC


Index


Home


142


Windshield Defroster Button Turns on the A/C, selects airflow from the defroster vents at the base of the windshield, and switches the mode to fresh air.


Temperature Control Dial Adjusts the interior temperature.


(Recirculation) Button


Press the depending on environmental conditions.


button and switch the mode


Recirculation mode (indicator on): Recirculates air from the vehicle’s interior through the system.


Fresh air mode (indicator off): Maintains outside ventilation. Keep the system in fresh air mode in normal situations.


2013 CR-V 13 CR-V-31T0A6100.book 143 ページ 2012年8月10日 金曜日 午後3時34分


uuHeating and Cooling System *uUsing Vents, Heating and A/C


1Heating


When you select switches to fresh air.


, the mode automatically


1To rapidly warm up the interior


Change to fresh air mode as soon as the interior gets warm enough. The windows may fog up if kept in recirculation mode.


QRG


■ Heating


TOC


The heater uses heat from the engine coolant to warm the air. 1. Adjust the fan speed using the fan


control dial.


2. Select


3. Adjust the temperature using the


temperature control dial.


4. Press the


button (indicator off).


■ To rapidly warm up the interior 1. Set the fan to the maximum speed.


2. Select


3. Set the temperature to maximum high.


4. Press the


button (indicator on).


■ To dehumidify the interior When used in combination with the heater, the air conditioning system makes the interior warm and dry and can prevent the windows from fogging up. 1. Adjust the fan speed using the fan control dial.


2. Press the A/C button to turn on the air conditioning system.


Index


3. Select


4. Adjust the temperature using the temperature control dial.


Home


Continued


143


2013 CR-V 13 CR-V-31T0A6100.book 144 ページ 2012年8月10日 金曜日 午後3時34分


uuHeating and Cooling System *uUsing Vents, Heating and A/C


QRG


■ Cooling


1. Adjust the fan speed using the fan


control dial.


2. Select


3. Adjust the temperature using the


temperature control dial.


4. Press the A/C button (indicator on).


■ To rapidly cool down the interior 1. Set the fan to the maximum speed.


2. Set the temperature to maximum low.


3. Press the


button (indicator on).


■ Defrosting the Windshield and Windows


button turns the air


Pressing the conditioning system on and automatically switches the system to fresh air mode.


■ To rapidly defrost the windows 1. Set the fan to the maximum speed.


2. Press the


button.


3. Press the


button.


4. Set the temperature to maximum high.


TOC


Index


Home


144


1To rapidly cool down the interior


If the interior is very warm, you can cool it down more rapidly by partially opening the windows.


While in the ECON mode, the system has greater temperature fluctuations.


Pressing the button bypasses the ECON mode control, and cools down the interior more rapidly.


1Defrosting the Windshield and Windows


For your safety, make sure you have a clear view through all the windows before driving. Do not set the temperature near the upper or lower limit. When cold air hits the windshield, the outside of the windshield may fog up. If the side windows fog up, adjust the vents so that the air hits the side windows.


1To rapidly defrost the windows


After defrosting the windows, switch over to fresh air mode. If you keep the system in recirculation mode, the windows may fog up from humidity. This impedes visibility.


2013 CR-V 13 CR-V-31T0A6100.book 145 ページ 2012年8月10日 金曜日 午後3時34分


Climate Control System *


QRG


Using Automatic Climate Control The automatic climate control system maintains the interior temperature you select. The system also selects the proper mix of heated or cooled air that raises or lowers the interior temperature to your preference as quickly as possible.


Dashboard vents


Dashboard and floor vents


Floor vents


Floor and defroster vents


TOC


Driver's Side Temperature Control Dial


(Fan Control) Buttons


1Using Automatic Climate Control


If any button is pressed while in AUTO, the function of that button takes priority. The AUTO indicator goes off, but functions of other buttons pressed are still in auto mode.


To prevent cold air from blowing in from outside, the fan may not start immediately when the AUTO button is pressed.


If the interior is very warm, you can cool it down more rapidly by partially opening the windows, turning the system on AUTO, and setting the temperature to low. Change the fresh air mode to recirculation mode until the temperature cools down.


AUTO Button


Passenger's Side Temperature Control Dial


(Recirculation) Button


A/C (Air Conditioning) Button


When you set the temperature to the lower or upper limit, Lo or Hi is displayed.


Use the system when the engine is running. 1. Press the AUTO button. 2. Adjust the interior temperature using the driver's side or passenger's side control


Pressing the control system between on and off. When turned on, the system returns to your last selection.


button switches the climate


dial.


3. Press the


button to cancel.


While in ECON mode, the system has greater temperature fluctuations.


■ Switching between the recirculation and fresh air modes Press the button and switch the mode depending on environmental conditions. Recirculation mode (indicator on): Recirculates air from the vehicle’s interior through the system. Fresh air mode (indicator off): Maintains outside ventilation. Keep the system in fresh air mode in normal situations.


Index


Home


* Not available on all models


Continued


145


2013 CR-V 13 CR-V-31T0A6100.book 146 ページ 2012年8月10日 金曜日 午後3時34分


uuClimate Control System *uUsing Automatic Climate Control


■ Defrosting the Windshield and Windows


button turns the air


Pressing the conditioning system on and automatically switches the system to fresh air mode.


1Defrosting the Windshield and Windows


For your safety, make sure you have a clear view through all the windows before driving.


Do not set the temperature near the upper or lower limit.


Pressing the system returns to the previous settings.


button again to turn off, the


When cold air hits the windshield, the outside of the windshield may fog up.


■ To rapidly defrost the windows


1. Press the


button.


2. Press the


button.


If the side windows fog up, adjust the vents so that the air hits the side windows.


1To rapidly defrost the windows


After defrosting the windows, switch over to fresh air mode. If you keep the system in recirculation mode, the windows may fog up from humidity. This impedes visibility.


QRG


TOC


Index


Home


146


2013 CR-V uuClimate Control System *uSynchronized Mode


1Synchronized Mode


When you press the to synchronized mode.


button, the system changes


When the system is in dual mode, the driver side temperature and the passenger side temperature can be set separately.


Models with navigation system In AUTO mode, the system adjusts each temperature based on the information of the sunlight sensor and the sun position updated by the navigation system’s GPS.


13 CR-V-31T0A6100.book 147 ページ 2012年8月10日 金曜日 午後3時34分


Synchronized Mode


QRG


You can set the temperature synchronously for the driver side and the passenger side in synchronized mode.


1. Press the SYNC button.


uThe system switches to synchronized mode.


2. Adjust the temperature using driver’s side temperature control dial.


Press the SYNC button to return to dual mode.


TOC


Index


Home


147


2013 CR-V 13 CR-V-31T0A6100.book 148 ページ 2012年8月10日 金曜日 午後3時34分


uuClimate Control System *uAutomatic Climate Control Sensors


Automatic Climate Control Sensors


QRG


Sunlight Sensor


The automatic climate control system is equipped with a sunlight sensor, an interior temperature and humidity sensor. Do not cover or spill any liquid on them.


Temperature and Humidity Sensor


TOC


Index


Home


148


2013 CR-V 13 CR-V-31T0A6100.book 149 ページ 2012年8月10日 金曜日 午後3時34分


QRG


Features


This chapter describes how to operate technology features.


Audio System


About Your Audio System................ 150
USB Adapter Cable .......................... 151
Auxiliary Input Jack* ........................ 151
Audio Antenna ................................ 152
Audio System Theft Protection ......... 152
Audio System Basic Operation ........ 153
Audio Remote Controls.................... 154
Adjusting the Sound ........................ 155
Playing AM/FM Radio....................... 156
Playing XM® Radio* ......................... 159
Playing a CD .................................... 161
Playing an iPod®............................... 164


Playing Internet Radio ...................... 167
Playing a USB Flash Drive ................. 169
Playing Bluetooth® Audio ................ 172
Rear Entertainment System * ........... 174
Audio Error Messages ...................... 186
General Information on the Audio System ............................................. 190
Bluetooth® HandsFreeLink®


Using HFL ........................................ 194
HFL Menus ...................................... 196
Compass ............................................ 223


149


Index


Home


* Not available on all models


2013 CR-V 13 CR-V-31T0A6100.book 150 ページ 2012年8月10日 金曜日 午後3時34分


Audio System


QRG


About Your Audio System On models with navigation system, see the Navigation System Manual for operation of the audio system, for these features.


Bluetooth® HandsFreeLink®, and voice commands


The audio system features AM/FM radio and the XM® Radio service. It can also play audio CDs, WMA/MP3/AAC files, USB flash drives, iPod Bluetooth® devices.


®, iPhone® and


You can operate the audio system from the buttons and switches on the panel, or the remote controls on the steering wheel.


1About Your Audio System


XM® Radio is available on a subscription basis only. For more information on XM® Radio, contact a dealer.


2 General Information on the Audio System


P. 190


XM® Radio is available in the United States and Canada, except Hawaii, Alaska, and Puerto Rico.


XM® is a registered trademark of Sirius XM Radio, Inc.


Video CDs, DVDs, and 3-inch (8-cm) mini CDs are not supported.


iPod®


iPod® and iPhone® are registered trademark owned by Apple Inc.


USB Flash Drive


State or local laws may prohibit the operation of handheld electronic devices while operating a vehicle.


TOC


Index


Home


150


Remote Control


* Not available on all models


2013 CR-V 13 CR-V-31T0A6100.book 151 ページ 2012年8月10日 金曜日 午後3時34分


USB Adapter Cable


QRG


1. Unclip the USB connector and loosen the


1USB Adapter Cable


uuAudio SystemuUSB Adapter Cable


adapter cable.


2. Install the iPod® dock connector or the USB


flash drive to the USB connector.


Auxiliary Input Jack* Use the jack to connect a standard audio device.


1. Open the AUX cover.


2. Connect a standard audio device to


the input jack using a 1/8 inch (3.5 mm) stereo miniplug. u The audio system automatically switches


to the AUX mode.


• Do not leave the iPod® or USB flash drive in the


vehicle. Direct sunlight and high temperatures may damage it.


• Do not use an extension cable with the USB


adapter cable.


• Do not connect the iPod® or USB flash drive using a


hub.


• Do not use a device such as a card reader or hard


disk drive, as the device or your files may be

Loading...
x