2012 Honda CR V Owners Manual

The top page of the DVD’s title menu appears. The title menu also appears when you press the MENU button while the DVD is in the slot not playing. Press the CANCEL or MENU button to return.

Menu: The DVD’s title menu appears.

Play Mode: You can change the following three settings: Audio - Select a language for audio that is available on the DVD. The sound characteristics (Dolby Digital, LPCM, MPEG Audio, etc) of that audio is also displayed. Subtitle - Select a subtitle that is available on the DVD. Angle - Select a view angle that is available on the DVD. If the DVD currently playing does not carry multiple angles, only one option Angle 1 comes on. Press the CANCEL or MENU button to return.

198

CR-V-31T0A600.book 199 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuRear Entertainment System *uOperating the System

Search: You can search for a DVD segment from the following methods. Title Search - Select the title you want to play. Chapter Search - Select the chapter you want to play.

NumInput: Enter a two digit number, if issued to the DVD, to find the segment you want to start to play. 1. Select NumInput to go to the number input screen. 2. Use the

buttons to input numbers.

, and

u If you want to delete a number, select DEL.

3. The cursor automatically goes to ENT after you input two digits. Press the ENT

button to enter.

Repeat: Highlight this option and press the ENT button to change the repeat mode from chapter repeat and title repeat, to repeat off.

Continued

199

CR-V-31T0A600.book 200 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuRear Entertainment System *uOperating the System

■ SETUP button on the remote

Press the SETUP button while the DVD is playing to see the available options. Use the

and

buttons to highlight the option and

then press ENT.

1SETUP button on the remote

Some DVD formats do not allow for some of the setting adjustments.

Disp Adjust: You can adjust the overhead screen’s Brightness, Contrast, Black Level, Color, and Tint. To return to the default display setting, select Reset. After you make all the adjustments, the screen goes back to the top SETUP screen, or press the CANCEL button to return.

Aspect Ratio: You can select the screen mode with a different aspect ratio from Normal, Wide, Zoom, and Full. After you select the mode, it takes about one second to return to the play mode with the selected ratio.

Language: You can select the display language from English, French, and Spanish.

200

CR-V-31T0A600.book 201 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuRear Entertainment System *uOperating the System

When the DVD is not playing Initial Settings - Press the SETUP button to configure the initial Language, Dynamic Range, and Angle Mark settings before playing a DVD.

1SETUP button on the remote

Initial Settings: The prior language varies by disc. You may not be able to configure your selected language setting.

Language Settings: Select the language for the DVD’s displayed menus (Menu Language), the DVD’s audio (Audio Language), and the DVD’s subtitle (Subtitle Language). 1. Select the language setting. 2. Select the language from English, French, Spanish, Arabic, German, Italian,

Dutch, Chinese, Korean, Thai, Japanese, and other.

3. If you select other, you need to enter the four digit language code to configure

the language that is not listed. Select Yes to go to the number input screen. u To return to the Language Settings screen, select No.

4. Press the ENT button each time you input a digit.

u If you want to delete a number, select DEL.

5. The cursor automatically goes to ENT after you input four digits. Press the ENT

button to command.

Dynamic Range: This feature reduces the difference between the loud and quiet sound levels. Select ON or OFF.

Angle Mark: You can select whether to display the angle mark appearing in the upper right corner of the screen when you change the view angle while the DVD is playing. Select ON or OFF.

Continued

201

CR-V-31T0A600.book 202 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuRear Entertainment System *uOperating the System

■ System Controls and Menus for CD

(Power) Button

Press to turn the audio system ON and OFF.

TITLE Button Press to scroll titles on CD.

DVD Button Press to listen to a CD.

to

, or

Use highlight a menu item, and press the ENT button to make a selection.

to change tracks.

CANCEL Button Press to go back to the previous operation. SKIP Buttons or Press Play/Pause Button Press to pause the CD. Press to again resume. Rewind Button Press and hold to reverse to track.

202

SETUP Button

The following options appear when you play a CD and press the SETUP button:

Disp Adjust

Fast-forward Button Press and hold to fast forward to track.

Appearance

Language

Brightness Contrast Black Level Reset Blue Black White Brown Red

CR-V-31T0A600.book 203 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuRear Entertainment System *uOperating the System

■ Playing a CD Press the DVD button. The available options appear on the overhead screen are Repeat, Random, and Scan. These functions are the same as those of the playing a DVD.

2 Playing a DVD P. 197

1System Controls and Menus for CD

You can also insert an audio CD compatible with the system, or recorded in MP3/WMA/AAC formats into the slot and play.

2 Playable Discs P. 204

To scroll your audio data title, press the TITLE button for five seconds.

■ SETUP button on the remote

Press the SETUP button while the CD is playing to see the available options. Use the

and

buttons to highlight the option and

then press ENT.

Disp Adjust: You can adjust the overhead screen’s Brightness, Contrast, and Black Level. To return to the default display setting, select Reset. After you make all the adjustments, the screen goes back to the top SETUP screen, or press the CANCEL button to return.

Appearance: You can select the screen color from blue, black, white, brown, and red.

Language: You can select the display language from English, French, and Spanish.

203

CR-V-31T0A600.book 204 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuRear Entertainment System *uPlayable Discs

Playable Discs

The discs that come with these labels can be played in your vehicle’s rear entertainment system.

Also look for the region code of 1 or ALL on the package or jacket on the disc.

DVD-ROMs are not playable in this unit. However, the audio data, such as MP3, WMA and AAC music files, on a DVD-ROMs can be played.

1Playable Discs

This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights.

Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision.

204

CR-V-31T0A600.book 205 ページ ２０１１年８月８日　月曜日　午後６時２６分

Audio Error Messages

CD Player If a disc error occurs, you may see the following error messages.

Error Message

Cause

Solution

HEAT ERROR

High temperature

UNPLAYABLE/ Unsupported Track/file format not supported

BAD DISC PLEASE CHECK OWNERS MANUAL PUSH EJECT

MECH ERROR

Mechanical error

BAD DISC PLEASE CHECK OWNERS MANUAL

Servo error

CHECK DISC

Disc error

● Turn the audio system off and allow the player to cool down until

the error message is cleared.

● Current track/file will be skipped. The next supported track/file

plays automatically.

● Press the

(eject) button and remove the disc, and check that the

error message is cleared.

● Check that the disc is not damaged or deformed, and insert the

disc again.

2 Protecting CDs P. 212

● If the error message reappears, press the

button, and pull out

the disc.

● Insert a different disc.

If the new disc plays, there is a problem with the first disc.

● If the error message repeats, or the disc cannot be removed,

contact a dealer. Do not try to force the disc out of the player.

● Check that the disc is not damaged or deformed.

2 Protecting CDs P. 212

205

CR-V-31T0A600.book 206 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio Error MessagesuiPod®/USB Flash Drive

iPod®/USB Flash Drive If an error occurs while playing an iPod® or USB flash drive, you may see the following error messages. If you cannot clear the error message, contact a dealer.

Error Message

USB Error

Appears when there is a problem with the USB adapter unit. Check if the device is compatible with the USB adapter unit.

Solution

Bad USB Device Please Check Owners Manual.

Appears when an incompatible device is connected. Disconnect the device. Then turn the audio system off, and turn it on again. Do not reconnect the device that caused the error.

No Song

Appears when the iPod® is empty. Check that compatible files are stored on the device.

Unsupported Ver

Appears when an unsupported iPod® is connected. If it appears when a supported iPod® is connected, update the iPod® software to the newer version.

Retry Connection

Appears when the system does not acknowledge the iPod®. Reconnect the iPod®.

Unplayable File

No Data

Unsupported

Appears when the files in the USB flash drive are DRM or an unsupported format. This error message appears for about 3 seconds, then plays the next song.

Appears when the USB flash drive is empty or there are no MP3, WMA, or AAC files in the USB flash drive. Check that compatible files are stored on the device.

Appears when an unsupported device is connected. If it appears when a supported device is connected, reconnect the device.

206

CR-V-31T0A600.book 207 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio Error MessagesuPandora®

U.S. models Models with multi-information display Pandora® If an error occurs while playing Pandora®, you may see the following error messages. If you cannot clear the error message, contact a dealer.

Error Message

Solution

PANDORA No Station

Appears when there is no station list on the device. Use the device to create a station.

PANDORA Unsupported Ver. Appears when Pandora version is not supported. Please update the device application.

PANDORA No Service

Appears when Pandora is performing system maintenance. Try again later.

PANDORA Check Device

Appears when Pandora is unable to play music. Check your device.

Pandora Loading

Appears when Pandora is loading.

207

CR-V-31T0A600.book 208 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuAudio Error MessagesuDVD Player Error Messages

Models with rear entertainment system DVD Player Error Messages

Error Message

Cause

Disc Error

FOCUS Error

MECH Error

Mechanical Error

Solution

Press the disc eject button, and remove the disc. Check for an error indication. Insert the disc again. If the code does not disappear or the disc cannot be removed, consult a dealer.

Region Error

Invalid region code

Heat Error

High temperature

The disc is not playable in this unit. Eject the disc, and insert a disc compatible with this system.

Turn the system off and allow the player to cool down until the error message is cleared.

Format Error

Track/file format not supported

Current track/file will be skipped. The next supported track/file plays automatically.

208

CR-V-31T0A600.book 209 ページ ２０１１年８月８日　月曜日　午後６時２６分

Audio Remote Controls

Allows you to operate the audio system while driving. SOURCE Button Cycles through the audio modes as follows: FM1 FM2 AM XM1 * XM2 * CD AUX

SOURCE Button

Button

Button

(+ Button

(- Button

1Audio Remote Controls

The CD mode appears only when a CD is loaded.

When in the AUX mode, the following are operable from the remote controls: • iPod®/USB flash drive connected to the USB

adapter cable

• Bluetooth® Audio (with some phones only)

(+ (- (Volume) Buttons Press (+: Increases the volume. Press (-: Decreases the volume.

Buttons

• When listening to the radio

Press Press

: Selects the next preset radio station. : Selects the previous preset radio station.

• When listening to a CD, iPod®, USB flash drive, or Bluetooth® Audio *

Press Press

: Skips to the next song. : Goes back to the beginning of the current or previous song.

• When listening to Pandora®

: Skips to the next song.

Press Press and hold Press and hold

: Selects the previous station. : Selects the next station.

* Not available on all models

209

CR-V-31T0A600.book 210 ページ ２０１１年８月８日　月曜日　午後６時２６分

General Information on the Audio System

XM® Radio Service* ■ Subscribing to XM® Radio 1. You need your radio ID ready before registering for subscription. To see the ID in

the display: Turn the selector knob until 0 appears.

2. Have your radio ID and credit card number ready, and either call or visit the XM®

website to subscribe.

■ Receiving XM® Radio Press the (XM®) button and stay in this mode for about 30 minutes until the service is activated. Make sure your vehicle is in an open area with good reception.

■ XM® Radio Display Messages LOADING: XM® is loading the audio or program information. OFF AIR: The channel is not currently broadcasting. UPDATING: The encryption code is being updated. Channels 0 and 1 still work normally. NO SIGNAL: The signal is too weak in the current location. --------: No such channel exists, the channel is not part of your subscription, or the artist or title information is unavailable. ANTENNA: There is a problem with the XM® antenna. Contact a dealer.

210

* Not available on all models

1Subscribing to XM® Radio

Contact Information for XM® Radio: US: XM® Radio at www.siriusxm.com or (800) 852- 9696
Canada: XM® Canada at www.xmradio.ca, or (877) 209-0079

1Receiving XM® Radio

The XM® satellites are in orbit over the equator; therefore, objects south of the vehicle may cause satellite reception interruptions. Satellite signals are more likely to be blocked by tall buildings and mountains the farther north you travel from the equator.

You may experience reception problems under the following circumstances: • In a location with an obstruction to the south of

your vehicle.

• In tunnels • On the lower level of a multi-tiered road • Large items carried on the roof rack

CR-V-31T0A600.book 211 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuGeneral Information on the Audio System uRecommended CDs

Recommended CDs • Use only high-quality CD-R or CD-RW discs labeled for audio use. • Use only CD-R or CD-RW discs on which the recordings are closed. • Play only standard round-shaped CDs.

The CD packages or jackets should have one of these marks.

1Recommended CDs

A Dual-disc cannot play on this audio unit. If recorded under certain conditions, a CD-R or CD-RW may not play either.

■ CDs with MP3 or WMA files • Some software files may not allow for audio play or text data display. • Some versions of MP3 or WMA formats may be unsupported.

Continued

211

CR-V-31T0A600.book 212 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuGeneral Information on the Audio SystemuRecommended CDs

■ Protecting CDs Follow these precautions when handling or storing CDs: • Store a CD in its case when it is not being played. • When wiping a CD, use a soft clean cloth from the center to the outside edge. • Handle a CD by its edge. Never touch either surface. • Never insert foreign objects into the CD player. • Keep CDs out of direct sunlight and extreme heat. • Do not place stabilizer rings or labels on the CD. • Avoid fingerprints, liquids, and felt-tip pens on the CD.

212

1Protecting CDs

NOTICE Do not insert a damaged CD. It may be stuck inside and damage the audio unit.

Examples: ● Bubbled, wrinkled, labeled, and

excessively thick CDs

Bubbled/ Wrinkled

With Label/ Sticker

Using Printer Label Kit

Sealed With Plastic Ring

● Damaged CDs

● Poor quality

CDs

Warped

Burrs

Chipped/ Cracked ● Small CDs

3-inch (8-cm) CD

CR-V-31T0A600.book 213 ページ ２０１１年８月８日　月曜日　午後６時２６分

uuGeneral Information on the Audio SystemuCompatible iPod® and USB Flash Drives

Compatible iPod® and USB Flash Drives ■ iPod® Model Compatibility

Model

iPod classic ® 80GB/160GB

iPod classic ® 120GB

iPod classic ® 160GB (launch in 2009)

iPod ® (5th generation)

iPod nano ® iPod touch ® iPhone ® 3GS

iPhone ® 4

1iPod® Model Compatibility

This system may not work with all software versions of these devices.

■ USB Flash Drives • Use a recommended USB flash drive of 256 MB or higher. • Some digital audio players may not be compatible. • Some USB flash drives (e.g., a device with security lockout) may not work. • Some software files may not allow for audio play or text data display. • Some versions of MP3, WMA, or AAC formats may be unsupported.

1USB Flash Drives

Files on the USB flash drive are played in their stored order. This order may be different from the order displayed on your PC or device.

213

CR-V-31T0A600.book 214 ページ ２０１１年８月８日　月曜日　午後６時２６分

Bluetooth® HandsFreeLink®

Models with navigation system For models with the navigation system, see Navigation System Manual for how to operate the Bluetooth® HandsFreeLink®.

Models without navigation system Bluetooth® HandsFreeLink® (HFL) allows you to place and receive phone calls using your vehicle's audio system, without handling your cell phone.

Using HFL ■ HFL Buttons

Pick-up Button

Volume up

Microphone

Volume down

Hang-up/Back Button TALK Button

Selector Knob

PHONE Button

(Pick-up) button: Press to go directly to the Phone screen or to answer an

incoming call.

(Hang-up/back) button: Press to end a call or to cancel a command. (TALK) button: Press to call a number with a stored voice tag.

PHONE button: Press to go directly to the Phone screen. Selector knob: Rotate

to select an item on the screen, then press

214

* Not available on all models

1Bluetooth® HandsFreeLink®

To use HFL, you need a Bluetooth-compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities: • U.S.: Visit www.handsfreelink.honda.com, or call

(888) 528-7876.

• Canada: Visit www.handsfreelink.ca, or call (888)

528 -7876.

Voice control tips • Aim the vents away from the ceiling and close the windows, as noise coming from them may interfere with the microphone. • Press and release the

button when you want to

call a number using a stored voice tag. Speak clearly and naturally after a beep.

• If the microphone picks up voices other than yours,

the command may be misinterpreted.

• To change the volume level, use the audio system's volume knob or the remote audio controls on the steering wheel.

CR-V-31T0A600.book 215 ページ ２０１１年８月８日　月曜日　午後６時２６分

■ HFL Status Display

Bluetooth Indicator Comes on when your phone is connected to HFL.

Roam Status Signal Strength

Battery Level Status HFL Mode

The multi-information display notifies you when there is an incoming call.

Call Name

■ Limitations for Manual Operation

Certain manual functions are disabled or inoperable while the vehicle is in motion. You cannot select a grayed-out option until the vehicle is stopped.

Only previously stored speed dial entries can be called using voice commands while the vehicle is in motion.

2 Speed Dial P. 231

Disabled Option

* Not available on all models

uu Bluetooth® HandsFreeLink®

*uUsing HFL

1Bluetooth® HandsFreeLink®

Bluetooth® Wireless Technology Bluetooth® name and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Honda Motors Co., Ltd., is under license. Other trademarks and trade names are those of their respective owners.

HFL Limitations An incoming call on HFL will interrupt the audio system when it is playing. It will resume when the call is ended.

1HFL Status Display

The information that appears on the multi- information display varies between phone models.

You can change the system language to English, French, or Spanish.

2 Customized Features P. 86

215

1HFL Menus

To use HFL, you must first pair your Bluetooth- compatible cell phone to the system while the vehicle is parked.

Some functions are limited while driving. A message appears on the screen when the vehicle is moving and the operation is canceled.

CR-V-31T0A600.book 216 ページ ２０１１年８月８日　月曜日　午後６時２６分

uu Bluetooth® HandsFreeLink®

*uHFL Menus

HFL Menus The ignition switch must be in ACCESSORY (q or ON (w to use HFL.

PHONE

or

Phone

Speed Dial*1

Display your speed dial entry lists. (up to 15 entries per paired phone)

Call History*1

Dialed Calls

Display the last 20 outgoing calls.

Received Calls

Display the last 20 incoming calls.

Missed Calls

Display the last 20 missed calls.

Phonebook*1

Display the paired phone’s phonebook.

Dial*1

Enter a phone number to dial.

*1: Appears only when a phone is connected to HFL.

216

CR-V-31T0A600.book 217 ページ ２０１１年８月８日　月曜日　午後６時２６分

uu Bluetooth® HandsFreeLink®

*uHFL Menus

Redial*1

Redial the last number dialed in the phone’s history.

Text Message

Select message and

Message is read aloud

Read/Stop reading

System reads received message aloud, or stop message from being read.

Reply

Call

Reply to a received message using one of six fixed phrases.

Make a call to the sender.

Display Message

See an entire received message (if more than three lines of text).

*1: Appears only when a phone is connected to HFL.

Continued

217

CR-V-31T0A600.book 218 ページ ２０１１年８月８日　月曜日　午後６時２６分

uu Bluetooth® HandsFreeLink®

*uHFL Menus

Phone Setup

Connection

Add a New Phone

Pair a phone to the system.

Connect a Phone

Connect a phone to the system.

Disconnect Phone

Disconnect a paired phone from the system.

Delete a Phone

Delete a previously paired phone.

Pairing Code

Create a code for a paired phone.

218

CR-V-31T0A600.book 219 ページ ２０１１年８月８日　月曜日　午後６時２６分

uu Bluetooth® HandsFreeLink®

*uHFL Menus

Speed Dial*1

Add New

Phonebook

Select a phone number from the phonebook to store as a speed dial number.

Call History

Select a phone number from the call history to store as a speed dial number.

Phone Number

Existing entry list

Change Speed Dial

Enter a phone number to store as a speed dial number.

Change a previously stored speed dial number.

Delete Speed Dial

Delete a previously stored speed dial number.

Store Voice Tag

Create a voice tag for a speed dial number.

Change Voice Tag

Change a voice tag for a speed dial number.

Delete Voice Tag

Delete a voice tag for a speed dial number.

Continued

219

*1: Appears only when a phone is connected to HFL.

CR-V-31T0A600.book 220 ページ ２０１１年８月８日　月曜日　午後６時２６分

uu Bluetooth® HandsFreeLink®

*uHFL Menus

Auto Transfer

Set calls to automatically transfer from your phone to HFL when you enter the vehicle.

Caller ID Info

Name Priority

Prioritize the caller’s name as the caller ID.

Number Priority

Prioritize the caller’s phone number as the caller ID.

Passcode*1

Create a security PIN for a paired phone.

Text Message Notice

Turn incoming text message notifications on or off.

System Clear

Clear the system of all paired phones, phonebook entries, and security codes.

*1: Appears only when a phone is connected to HFL.

220

CR-V-31T0A600.book 221 ページ ２０１１年８月８日　月曜日　午後６時２６分

■ Phone Setup

■ To pair a cell phone (when there is no

uu Bluetooth® HandsFreeLink®

*uHFL Menus

1Phone Setup

Your Bluetooth-compatible phone must be paired to HFL before you can make and receive hands-free calls.

Phone Pairing Tips: • You cannot pair your phone while the vehicle is

moving.

• Your phone must be in the discoverable or search

mode when pairing the phone. Refer to your phone's manual.

• Up to six phones can be paired. • Your phone's battery may drain faster when it is

paired to HFL.

• If your phone is not ready for pairing or not found by the system within three minutes, the system will time out and returns to idle.

Once you have paired a phone, you can see it displayed on the screen with one or two icons on the right side. These icons indicate the following:

: The phone can be used with HFL. : The phone is compatible with Bluetooth® Audio.

phone paired to the system) 1. Press the PHONE button or the 2. Rotate

to select Yes, then press u HFL automatically searches for a

button.

Bluetooth device.

3. When your phone appears on the list, select

it by pressing u If your phone doesn’t appear, select Phone Not Found? and search for Bluetooth devices using your phone. From your phone, select HandsFreeLink.

4. HFL gives you a four-digit pairing code to

input on your phone. When your phone prompts you, input the four-digit pairing code.

5. You will receive a notification on the screen

if pairing is successful.

Continued

221

CR-V-31T0A600.book 222 ページ ２０１１年８月８日　月曜日　午後６時２６分

uu Bluetooth® HandsFreeLink®

*uHFL Menus

■ To pair a cell phone (when a phone has

already been paired to the system)

1. Press the PHONE button or the 2. Rotate

to select Phone Setup, then

button.

press u If a prompt appears asking to connect to

a phone, select No and proceed with step 2.

3. Rotate

to select Connection, then press

4. Rotate

to select Add a New Phone,

then press u The screen changes to Select Location.

5. Rotate

to select Empty, then press

222

CR-V-31T0A600.book 223 ページ ２０１１年８月８日　月曜日　午後６時２６分

uu Bluetooth® HandsFreeLink®

*uHFL Menus

5. Make sure your phone is in search or

discoverable mode, then press u HFL automatically searches for a

Bluetooth device.

6. When your phone appears on the list, select

it by pressing u If your phone doesn’t appear, select Phone Not Found? and search for Bluetooth devices using your phone. From your phone, select HandsFreeLink.

7. HFL gives you a four-digit pairing code to

input on your phone. When your phone prompts you, input the four-digit pairing code.

8. You will receive a notification on the screen

if pairing is successful.

Continued

223

1To change the pairing code setting

The default pairing code is “0000” until you change the setting. To create your own, select Fixed, and delete the current code, then enter a new one.

For a randomly generated pairing code each time you pair a phone, select Random.

CR-V-31T0A600.book 224 ページ ２０１１年８月８日　月曜日　午後６時２６分

uu Bluetooth® HandsFreeLink®

*uHFL Menus

■ To change the pairing code setting 1. Press the PHONE button or the 2. Rotate

to select Phone Setup, then

button.

press

3. Rotate

to select Connection, then press

4. Rotate

to select Pairing Code, then

press

5. Rotate

to select Fixed or Random, then

press

224

CR-V-31T0A600.book 225 ページ ２０１１年８月８日　月曜日　午後６時２６分

uu Bluetooth® HandsFreeLink®

*uHFL Menus

button.

■ To delete a paired phone 1. Press the PHONE button or the 2. Rotate

to select Phone Setup, then

press u Repeat the procedure to select

Connection, then Delete a Phone.

3. Rotate

to select a phone you want to

delete, then press

4. You will receive a confirmation message on

the screen. Rotate press u You will receive a notification on the

to select Yes, then

screen if it is successful.

Continued

225

1To Set Up a Text Message Notice Option

ON: A pop-up notification comes on every time you receive a new text message. OFF: The message you receive is stored in the system without notification.

CR-V-31T0A600.book 226 ページ ２０１１年８月８日　月曜日　午後６時２６分

uu Bluetooth® HandsFreeLink®

*uHFL Menus

■ To Set Up a Text Message Notice Option

1. Press the PHONE button or the 2. Rotate

to select Phone Setup, then

button.

press

3. Rotate

to select Text Message Notice,

then press

4. Rotate

to select a mode you want, then

press

226

uu Bluetooth® HandsFreeLink®

*uHFL Menus

1To Create a Security PIN

In the phone is already security PIN protected, you need to enter the current security PIN before clearing the PIN or creating a new one.

CR-V-31T0A600.book 227 ページ ２０１１年８月８日　月曜日　午後６時２６分

■ To Create a Security PIN You can protect each of the six cell phones with a security PIN.

1. Press the PHONE button or the 2. Rotate

to select Phone Setup, then

button.

press u Repeat the procedure to select

Passcode.

3. Select a phone you want to add a security

PIN to. u Rotate

to select a phone you want to

add a security PIN to, then press

4. You will receive a confirmation message on

the screen. u Rotate

to select Yes, then press

5. Enter a new four-digit number.

u Rotate

to select, then press

. Press

to delete. Press

to enter the

security PIN.

6. Re-enter the four-digit number.

u The screen returns to the screen in step

2.

Continued

227

CR-V-31T0A600.book 228 ページ ２０１１年８月８日　月曜日　午後６時２６分

uu Bluetooth® HandsFreeLink®

*uHFL Menus

■ Automatic Transferring If you get into the vehicle while you are on the phone, the call can be automatically transferred to HFL.

1. Press the PHONE button or the 2. Rotate

to select Phone Setup, then

button.

press u Repeat the procedure to select Auto

Transfer.

3. Rotate 4. You will receive a notification on the screen

to select On, then press

if the change is successful.

■ Caller’s ID Information You can select a caller’s information to be displayed when you have an incoming call.

1. Press the PHONE button or the 2. Rotate

to select Phone Setup, then

button.

press u Repeat the procedure to select Caller ID

Info. 3. Rotate

press

to select a mode you want, then

4. You will receive a notification on the screen

if the change is successful.

228

1Caller’s ID Information

Name Priority mode: A caller’s name is displayed if it is stored in the phonebook. Number Priority mode: A caller’s phone number is displayed.

CR-V-31T0A600.book 229 ページ ２０１１年８月８日　月曜日　午後６時２６分

uu Bluetooth® HandsFreeLink®

*uHFL Menus

■ To Clear the System Security codes, paired phones, all stored voice tags, all speed dial entries, and all imported phonebook data are erased.

1. Press the PHONE button or the 2. Rotate

to select Phone Setup, then

button.

press u Repeat the procedure to select System

Clear.

3. Rotate

to select Yes, then press

4. You will receive a notification message on to select Yes, then

the screen. Rotate press

5. You will receive a notification message on

the screen. Rotate

to finish.

Continued

229

CR-V-31T0A600.book 230 ページ ２０１１年８月８日　月曜日　午後６時２６分

uu Bluetooth® HandsFreeLink®

*uHFL Menus

■ Automatic Import of Cellular Phonebook and Call History When your phone is paired, the contents of its phonebook and call history are automatically imported to HFL.

1Automatic Import of Cellular Phonebook and Call History

When you select a person from the list in the cellular phonebook, you can see up to three category icons. The icons indicate what types of numbers are stored for that name.

Pref

Home

Mobile

Work

Pager

Fax

Car

Message

Other

Voice

If a name has four or more numbers, “∙∙∙“ appears instead of category icons.

On some phones, it may not be possible to import the category icons to HFL.

The phonebook is updated after every connection. Call history is updated after every connection or call.

230

CR-V-31T0A600.book 231 ページ ２０１１年８月８日　月曜日　午後６時２６分

■ Speed Dial Up to 15 speed dial numbers can be stored per phone.

To store a speed dial number: 1. Press the PHONE button or the 2. Rotate

to select Phone Setup, then

button.

press u Repeat the procedure to select Speed

Dial, then Add New.

3. Rotate

to select a place to choose a

number from, then press By Phonebook: u Select a number from the linked cell

phone’s imported phonebook.

By Call History: u Select a number from the call history. By Phone Number: u Input the number manually.

4. When the speed dial is successfully stored, you are asked to create a voice tag for the number. Rotate then press 5. Using the

button, follow the prompts to

to select Yes or No,

uu Bluetooth® HandsFreeLink®

*uHFL Menus

1Speed Dial

You can use the audio preset buttons during a call to store a speed dial number: 1. Press and hold the desired audio preset button

during a call.

2. The contact information for the active call will be

stored for the corresponding speed dial.

When a voice tag is stored, you can press the

button and call the number using voice commands.

say the name for the speed dial entry.

Continued

231

CR-V-31T0A600.book 232 ページ ２０１１年８月８日　月曜日　午後６時２６分

uu Bluetooth® HandsFreeLink®

*uHFL Menus

■ To add a voice tag to a stored speed

dial number

1. Press the PHONE button or the 2. Rotate

to select Phone Setup, then

button.

press u Repeat the procedure to select Speed

Dial.

3. Select an existing speed dial entry. 4. Rotate

to select Store Voice Tag, then

press

5. Using the

button, follow the prompts to

complete the voice tag.

1Speed Dial

Avoid using duplicate voice tags. Avoid using “home” as a voice tag. It is easier for HFL to recognize a longer name. For example, use “John Smith” instead of “John.”

232

■ To delete a voice tag 1. Press the PHONE button or the 2. Rotate

to select Phone Setup, then

button.

press u Repeat the procedure to select Speed

Dial.

3. Select an existing speed dial entry. 4. Rotate

to select Delete Voice Tag,

then press u You will receive a confirmation message to select Yes,

on the screen. Rotate then press

CR-V-31T0A600.book 233 ページ ２０１１年８月８日　月曜日　午後６時２６分

uu Bluetooth® HandsFreeLink®

*uHFL Menus

button.

■ To delete a speed dial number 1. Press the PHONE button or the 2. Rotate

to select Phone Setup, then

press u Repeat the procedure to select Speed

Dial.

3. Select an existing speed dial entry. 4. Rotate

to select Delete Speed Dial,

then press u You will receive a confirmation message to select Yes,

on the screen. Rotate then press

■ Making a Call You can make calls by inputting any phone number, or by using the imported phonebook, call history, speed dial entries, or redial.

1Making a Call

Any voice-tagged speed dial entry can be dialed by voice from any screen. Press the giving a command.

button and wait for a beep before

The maximum range between your phone and vehicles is 30 feet (10 meters).

Once a call is connected, you can hear the voice of the person you are calling through the audio speakers.

Continued

233

CR-V-31T0A600.book 234 ページ ２０１１年８月８日　月曜日　午後６時２６分

uu Bluetooth® HandsFreeLink®

*uHFL Menus

■ To make a call using the imported

1To make a call using the imported phonebook

This function is disabled while the vehicle is moving. However, you can call a stored speed dial number using voice commands.

2 Limitations for Manual Operation P. 215
2 Speed Dial P. 231

phonebook

When your phone is paired, the contents of its phonebook are automatically imported to HFL. 1. Press the PHONE button or the 2. Rotate

button. to select Phonebook, then press

3. The phonebook is stored alphabetically. to select the initial, then press

Rotate

4. Rotate 5. Rotate

to select a name, then press to select a number, then press

u Dialing starts automatically.

■ To make a call using a phone number 1. Press the PHONE button or the 2. Rotate 3. Rotate

to select Dial, then press to select a number, then press

button.

4. Rotate

to select

, then press

u Dialing starts automatically.

1To make a call using a phone number

This function is disabled while the vehicle is moving. However, you can call a stored speed dial number using voice commands.

2 Limitations for Manual Operation P. 215
2 Speed Dial P. 231

234

CR-V-31T0A600.book 235 ページ ２０１１年８月８日　月曜日　午後６時２６分

uu Bluetooth® HandsFreeLink®

*uHFL Menus

■ To make a call using redial 1. Press the PHONE button or the 2. Rotate

to select Redial, then press

button.

u Dialing starts automatically.

■ To make a call using the call history Call history is stored by Dialed Calls, Received Calls, and Missed Calls. 1. Press the PHONE button or the 2. Rotate

button. to select Call History, then press

3. Rotate

to select Dialed Calls, Received

Calls, or Missed Calls, then press

4. Rotate

to select a number, then press

1To make a call using the call history

The call history displays the last 20 dialed, received, or missed calls. (Appears only when a phone is connected to HFL.)

u Dialing starts automatically.

■ To make a call using a speed dial entry 1. Press the PHONE button or the button. to select Speed Dial, then press 2. Rotate

1To make a call using a speed dial entry

On the Phone screen, the first six speed dials on the list can be directly selected by pressing the corresponding audio preset buttons (1-6).

3. Rotate

to select a number, then press

u Dialing starts automatically.

Select More Speed Dial Lists to view another paired phone’s speed dial list.

When a voice tag is stored, you can press the button and call the number using voice commands.

2 Speed Dial P. 231

Continued

235

 button to put the current call on hold to

1Receiving a Call Call Waiting Press the answer the incoming call. Press the call. Ignore the incoming call if you do not want to answer it. Press the current call.

button again to return to the current

button if you want to hang up the

CR-V-31T0A600.book 236 ページ ２０１１年８月８日　月曜日　午後６時２６分

uu Bluetooth® HandsFreeLink®

*uHFL Menus

■ Receiving a Call

HFL Mode

Caller Name

When there is an incoming call, an audible notification sounds (if activated) and the Incoming Call screen appears.

Press the Press the

button to answer the call. button to decline or end the call.

236

CR-V-31T0A600.book 237 ページ ２０１１年８月８日　月曜日　午後６時２６分

■ Options During a Call The following options are available during a call. Mute: Mute your voice. Transfer: Transfer a call from HFL to your phone. Touch Tones: Send numbers during a call. This is useful when you call a menu-driven phone system.

1. To view the available options, press the

PHONE button.

uu Bluetooth® HandsFreeLink®

*uHFL Menus

1Options During a Call

Touch Tones: Available on some phones.

2. Rotate

to select the option, then press