2010 Honda Civic Sedan Owners Manual

Toselecteitheraringtoneora promptastheincomingcall notification : Press and release the HFL Talk button before a command.

＊

1.

2.

3.

Say ‘‘

System setup

.’’

Call notification

’’ after the

Say ‘‘ prompts.

Follow the HFL prompts and say Ring tone Prompt ‘‘ .’’ You ’’ for no audible can also say ‘‘ incoming call notification.

’’ or ‘‘ Off

＊

The default setting is a ring tone.

Bluetooth HandsFreeLink

Toactivateordeactivatetheauto transferfunction: If you get into the vehicle while you are on the phone, the call can be automatically transferred to HFL with the ignition switch in the ACCESSORY (I) position.

Press and release the HFL Talk button before a command.

1.

2.

3.

Say ‘‘

System setup

.’’

Auto transfer

Say ‘‘ prompts.

’’ after the

HFL will let you know if auto transfer is on or off, depending on the previous setting. Follow the HFL prompts to change the setting.

CONTINUED

233

09/07/02 17:07:37 31SNA640_239

Bluetooth HandsFreeLink

Toclearthesystem: This operation clears the passcodes, paired phones, all names in the HFL phonebook, and all imported phonebook data.

Quick Language Selection Canadianmodelsonly Toquicklychangethelanguage: Press and release the HFL Talk button before a command.

Press and release the HFL Talk button before a command.

1.

Say the language you want to change to in that language.

1.

Say ‘‘

System setup

.’’

2.

Follow the HFL prompts.

2.

Say ‘‘

Clear

’’ after the prompts.

3.

Follow the HFL prompts to continue to complete the clearing procedure.

You can also clear the system when you have forgotten the passcode and cannot access HFL. When HFL asks you for the passcode, say ‘‘ clear the HFL phonebook and all imported phonebook data will be lost.

System .’’ Paired phones, all names in

234

Change Language Canadianmodelsonly Tochangethesystemlanguage betweenEnglishandFrench: Press and release the HFL Talk button before a command.

1.

2.

Say ‘‘

Change language

.’’

Follow the HFL prompts to change the language to English or French.

If you have not named your paired phone in the language you just selected, HFL will ask you to name it in the current language.

When French is your currently selected language, you can give voice commands in French.

09/07/02 17:07:44 31SNA640_240

Bluetooth

Bluetooth Wireless Technology The name and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Honda Motor Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.

AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation.

Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.

ThisdevicecomplieswithIndustry CanadaStandardRSS-210. Operationissubjecttothefollowingtwo conditions:(1)thisdevicemaynotcause interference,and(2)thisdevicemust acceptanyinterferencethatmaycause undesiredoperationofthedevice.

Bluetooth HandsFreeLink

235

09/07/02 17:07:47 31SNA640_241

236

09/07/02 17:07:51 31SNA640_242

Before Driving

Before you begin driving your vehicle, you should know what gasoline to use and how to check the levels of important fluids. You also need to know how to properly store luggage or packages. The information in this section will help you. If you plan to add any accessories to your vehicle, please read the information in this section first.

Break-in Period Fuel Recommendation Service Station Procedures

............................. ................. ......... ....................................

Refueling Opening and Closing the

. 238
. 238
. 239
. 239

Hood

Oil Check Engine Coolant Check

. 240
. 241
. 243
Fuel Economy . 244
Accessories and Modifications . 247
Carrying Cargo . 249

....................................... ................................... ............. ............................... ... .............................

237

09/07/02 17:08:06 31SNA640_243

Break-in Period, Fuel Recommendation

Break-in Period Help assure your vehicle’s future reliability and performance by paying extra attention to how you drive during the first 600 miles (1,000 km). During this period:

Avoid full-throttle starts and rapid acceleration.

Do not change the oil until the scheduled maintenance time.

Avoid hard braking for the first 200 miles (300 km).

Do not tow a trailer.

You should also follow these recommendations with an overhauled or exchanged engine, or when the brakes are replaced.

Fuel Recommendation AllmodelsexceptSi Your vehicle is designed to operate on unleaded gasoline with a pump octane number of 87 or higher. Use of a lower octane gasoline can cause a persistent, heavy, metallic rapping noise that can lead to engine damage.

Simodelonly Your vehicle is designed to operate on premium unleaded gasoline with a pump octane number of 91 or higher. Use of a lower octane gasoline can cause occasional metallic knocking noises in the engine and will result in decreased engine performance. Use of a gasoline with a pump octane number less than 87 can lead to engine damage.

We recommend using quality gasolines containing detergent additives that help prevent fuel system and engine deposits.

In addition, in order to maintain good performance, fuel economy, and emissions control, we strongly recommend, in areas where it is available, the use of gasoline that does NOT contain manganese-based fuel additives such as MMT.

Use of gasoline with these additives may adversely affect performance, and cause the malfunction indicator lamp on your instrument panel to come on. If this happens, contact your authorized dealer for service.

Some gasoline today is blended with oxygenates such as ethanol or MTBE. Your vehicle is designed to operate on oxygenated gasoline containing up to 10% ethanol by volume and up to 15% MTBE by volume. Do not use gasoline containing methanol.

238

09/07/02 17:08:17 31SNA640_244

Fuel Recommendation, Service Station Procedures

If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline.

Refueling

Push

For further important fuel-related information for your vehicle, or information on gasoline that does not contain MMT, visit Owner Link at Canada, visit additional information on gasoline.

. In www.honda.ca

owners.honda.com

for

You may hear a knocking noise from the engine if you drive the vehicle at low engine speed (below about 1,000
rpm) in a higher gear. To stop this, raise the engine speed by shifting to a lower gear.

1.

Park with the driver’s side closest to the service station pump.

2.

Open the fuel fill door by pushing on the handle to the left of the driver’s seat.

Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.

Stop the engine, and keep heat, sparks, and flame away. Handle fuel only outdoors. Wipe up spills immediately.

FUEL FILL CAP

CONTINUED

239

09/07/02 17:08:27 31SNA640_245

Service Station Procedures

3.

4.

Remove the fuel fill cap slowly. You may hear a hissing sound as pressure inside the tank equalizes. The fuel fill cap is attached to the fuel filler with a tether. Place the cap in the holder on the fuel fill door.

Stop filling the tank after the fuel nozzle automatically clicks off. Do not try to ‘‘top off’’ the tank. This leaves some room in the fuel tank for the fuel to expand with temperature changes. Ifthefuelnozzlekeepsclickingoff even though the tank is not full, there may be a problem with your vehicle’s fuel vapor recovery system. The system helps keep fuel vapor from going into the atmosphere. Try filling at another pump. If this does not fix the problem, consult your dealer.

240

5.

Screw the fuel fill cap back on until it clicks at least once. If you do not properly tighten the cap, the malfunction indicator lamp may come on (see page will also see a ‘‘CHECK FUEL CAP’’ message on the information display.

). You

340

6.

Push the fuel fill door closed until it latches.

Opening and Closing the Hood

HOOD RELEASE HANDLE

1.

Park the vehicle, and set the parking brake. Pull the hood release handle under the lower left corner of the dashboard. The hood will pop up slightly.

09/07/02 17:08:41 31SNA640_246

Service Station Procedures

SUPPORT ROD

Oil Check

DIPSTICK

LATCH

GRIP

Except Si

2.

Put your fingers under the front edge of the hood near the center. Slide your hand to the left until you feel the hood latch handle. Push this handle up to release it. Lift up the hood.

If the hood latch handle moves stiffly, or if you can open the hood without lifting the handle, the mechanism should be cleaned and lubricated.

3.

Pull the support rod out of its clip by holding the grip, and insert the end into the designated hole in the hood.

To close the hood, lift it up slightly to remove the support rod from the hole. Put the support rod back into its holding clip. Lower the hood to about a foot (30 cm) above the fender, then let it drop. Make sure it is securely latched.

Wait a few minutes after turning the engine off before you check the oil.

1.

Remove the dipstick (orange handle).

2.

Wipe off the dipstick with a clean cloth or paper towel.

3.

Insert it all the way back in its tube.

CONTINUED

241

09/07/02 17:08:49 31SNA640_247

Service Station Procedures

DIPSTICK

Except Si

Si

UPPER MARK LOWER MARK

UPPER MARK LOWER MARK

4.

Remove the dipstick again, and check the level. It should be between the upper and lower marks.

Si

242

If it is near or below the lower mark, see 290

Adding Engine Oil

on page

09/07/02 17:08:57 31SNA640_248

Engine Coolant Check

MAX

RESERVE TANK

MAX

RESERVE TANK

Service Station Procedure

Except Si

MIN

Si

MIN

Look at the coolant level in the radiator reserve tank. Make sure it is between the MAX and MIN lines. If Adding it is below the MIN line, see Engine Coolant for 294
information on adding the proper coolant.

on page

Owner’s Maintenance on page

Refer to Checks for information about checking other items on your vehicle.

286

243

09/07/02 17:09:08 31SNA640_249

Fuel Economy

Actual Mileage and EPA Fuel Economy Estimates Comparison. Fuel economy is not a fixed number. It varies based on driving conditions, driving habits and vehicle condition. Therefore, it is not possible for one set of estimates to predict fuel economy precisely for all drivers in all environments.

The EPA fuel economy estimates shown in the example to the right are a useful tool for comparison when buying a vehicle. EPA estimates include:

−

City MPG Represents urban driving in light traffic. A range of miles per gallon achieved is also provided.

−

Represents a

Highway MPG mixture of rural and interstate driving, in a warmed-up vehicle, typical of longer trips in free-flowing traffic. A range of miles per gallon

244

City MPG

Highway MPG

Combined Fuel Economy

Estimated Annual Fuel Cost

(Sample U.S. EPA label shown)

achieved is also provided.

−

Combined Fuel Economy Represents a combination of city and highway driving. The scale represents the range of combined fuel economy for other vehicles in the class.

Estimated Annual Fuel Cost − Provides an estimated annual fuel cost, based on 15,000 miles (20,000
km) per year multiplied by the cost

per gallon (based on EPA fuel cost data) divided by the combined fuel economy.

For more information on fuel economy ratings and factors that affect fuel economy, visit fueleconomy.gov vehicles.gc.ca

www. (Canada: Visit

www.

09/07/02 17:09:25 31SNA640_250

Fuel Economy Factors The following factors can lower your vehicle’s fuel economy:

Aggressive driving (hard acceleration and braking) Excessive idling, accelerating and braking in stop-and-go traffic Cold engine operation (engines are more efficient when warmed up) Driving with a heavy load or the air conditioner running Improperly inflated tires

Improving Fuel Economy

VehicleMaintenance A properly maintained vehicle maximizes fuel economy. Poor maintenance can significantly reduce fuel economy. Always maintain your vehicle according to the maintenance messages displayed on the information display (see Maintenance Checks For example:

Owner’s on page 286

).

Use the recommended viscosity motor oil, displaying the API Certification Seal (see page 290

).

Maintain proper tire inflation An underinflated tire increases − ‘‘rolling resistance,’’ which reduces fuel economy.

Avoid carrying excess weight in your vehicle It puts a heavier load on the engine, increasing fuel consumption.

−

−

Keep your vehicle clean In particular, a build-up of snow or mud on your vehicle’s underside adds weight and rolling resistance. Frequent cleaning helps your fuel economy.

Fuel Economy

DriveEfficiently

−

Drive moderately acceleration, abrupt cornering, and hard braking increase fuel consumption.

Rapid

−

Observe the speed limit Aerodynamic drag has a big effect on fuel economy at speeds above 45 mph (75 km/h). Reduce your speed and you reduce the drag. Trailers, car top carriers, roof racks and bike racks are also big contributors to increased drag.

−

If your vehicle has a

Always drive in the highest gear possible manual transmission, you can boost your fuel economy by up shifting as early as possible.

Avoid excessive idling Idling results in 0 miles per gallon (0 kms per liter).

−

CONTINUED

245

09/07/02 17:09:37 31SNA640_251

Fuel Economy

Minimize the use of the air conditioning system puts an extra load on the engine which makes it use more fuel. Use the fresh-air ventilation when possible.

The A/C

−

Plan and combine trips Combine several short trips into one. A warmed-up engine is more fuel efficient than a cold one.

−

Calculating Fuel Economy

MeasuringTechniques Direct calculation is the recommended source of information about your actual fuel economy. Using frequency of fill-ups or taking fuel gauge readings are NOT accurate measures of fuel economy. Fuel economy may improve over the first several thousand miles (kilometers).

246

CheckingYourFuelEconomy

Miles driven

Gallons of fuel

Miles per

Gallon

100

Liter

Kilometers

L per 100 km

1) 2) 3) 4)

Fill the fuel tank until the nozzle automatically clicks off. Reset trip counter to zero. Record the total gallons (liters) needed to refill. Follow one of the simple calculations above.

09/07/02 17:09:49 31SNA640_252

Accessories and Modifications

Modifying your vehicle, or installing some non-Honda accessories, can make it unsafe. Before you make any modifications or add any accessories, be sure to read the following information.

Accessories Your dealer has Honda accessories that allow you to personalize your vehicle, or improve its performance. These accessories have been designed and approved for your vehicle, and are covered by warranty.

Although non-Honda accessories may fit on your vehicle, they may not meet factory specifications, and could adversely affect your vehicle’s handling and stability.

Improper accessories or modifications can affect your vehicle’s handling, stability, and performance, and cause a crash in which you can be hurt or killed.

Follow all instructions in this owner’s manual regarding accessories and modifications.

When properly installed, cellular phones, alarms, two-way radios, and low-powered audio systems should not interfere with your vehicle’s computer controlled systems, such as your airbags, anti-lock brakes, and tire pressure monitoring system (if equipped).

Before installing any accessory:

Make sure the accessory does not obscure any lights, or interfere with proper vehicle operation or performance.

Be sure electronic accessories do not overload electrical circuits (see page the proper operation of your vehicle.

) or interfere with

342

Before installing any electronic accessory, have the installer contact your dealer for assistance. If possible, have your dealer inspect the final installation.

Do not install accessories on the side pillars or across the rear windows. Accessories installed in these areas may interfere with proper operation of the side curtain airbags.

247

09/07/02 17:09:59 31SNA640_253

Accessories and Modifications

Modifying Your Vehicle Removing parts from your vehicle, or replacing components with non-Honda components could seriously affect your vehicle’s handling, stability, and reliability.

Some examples are:

Lowering your vehicle with a non-Honda suspension kit that significantly reduces ground clearance can allow the undercarriage to hit speed bumps or other raised objects, which could cause the airbags to deploy.

Raising your vehicle with a non-Honda suspension kit can affect the handling and stability.

Non-Honda wheels, because they are a universal design, can cause excessive stress on suspension components and will not be compatible with the tire pressure monitoring system (TPMS) .

＊

Larger or smaller wheels and tires can interfere with the operation of your vehicle’s anti-lock brakes and other systems.

Modifying your steering wheel or any other part of your vehicle’s safety features can make the systems ineffective.

If you plan to modify your vehicle, consult your dealer.

＊

: If equipped

248

09/07/02 17:10:11 31SNA640_254

DOOR POCKETS

TRUNK

CENTER POCKET

CONSOLE COMPARTMENT

GLOVE BOX

SEAT-BACK POCKET ＊

＊

: If equipped

Carrying Cargo

Your vehicle has several convenient storage areas:

Glove box Door and seat-back pockets Console compartment Trunk, including the rear seats when folded down Center pocket

＊

＊

If equipped

However, carrying too much cargo, or improperly storing it, can affect your vehicle’s handling, stability, stopping distance, and tires, and make it unsafe. Before carrying any type of cargo, be sure to read the following pages.

249

09/07/02 17:10:21 31SNA640_255

Carrying Cargo

Load Limits The maximum load for your vehicle is 850 lbs (385 kg) for U.S. models and 395 kg for Canadian models.

This figure includes the total weight of all occupants, cargo, and accessories, and the tongue load if you are towing a trailer.

See Tire And Loading Information label attached to the driver’s doorjamb.

Label Example

Overloading or improper loading can affect handling and stability and cause a crash in which you can be hurt or killed.

−

Steps for Determining Correct Load Limit (1)

Locate the statement ‘‘The combined weight of occupants and cargo should never exceed XXX kg or XXX lbs.’’ on your vehicle’s placard.

(2)

Determine the combined weight of the driver and passengers that will be riding in your vehicle.

Follow all load limits and other loading guidelines in this manual.

(3)

Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.

250

09/07/02 17:10:37 31SNA640_256

(4)

The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the ‘‘XXX’’ amount equals 1,400 lbs. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1,400

150) = 650 lbs.)

750 (5

−

×

(5)

Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.

(6)

If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.

Carrying Cargo

Example 1

Example 2

Example 3

Max Load (850 lbs)

Passenger Weight (150 lbs x 2 = 300 lbs)

Cargo Weight (550 lbs)

Max Load (850 lbs)

Passenger Weight (150 lbs x 4 = 600 lbs)

Cargo Weight (250 lbs)

Max Load (850 lbs)

Passenger Weight (150 lbs x 5 = 750 lbs)

Cargo Weight (100 lbs)

In addition, the total weight of the vehicle, all occupants, accessories, cargo, and trailer tongue load must not exceed the Gross Vehicle Weight Rating (GVWR) or the Gross Axle Weight Rating (GAWR). Both are on a label on the driver’s doorjamb.

251

09/07/02 17:10:47 31SNA640_257

Carrying Cargo

Carrying Items in the Passenger Compartment

Store or secure all items that could be thrown around and hurt someone during a crash.

Carrying Cargo in the Trunk

Distribute cargo evenly on the floor of the trunk, placing the heaviest items on the bottom and as far forward as possible.

Do not put any items on top of the trunk panel. They can block your view and be thrown around the vehicle during a crash.

If you fold down the back seat, tie down items that could be thrown about the vehicle during a crash or sudden stop.

If you carry large items that prevent you from closing the trunk lid, exhaust gas can enter the passenger area. To avoid the possibility of poisoning on page 51

, follow the instructions

carbon monoxide

Be sure items placed on the floor behind the front seats cannot roll underneath and interfere with the proper operation of the seats, the sensors under the seats, or the driver’s ability to operate the pedals.

Keep the glove box closed while driving. If it is open, a passenger could injure their knees during a crash or sudden stop.

252

09/07/02 17:10:51 31SNA640_258

Driving

This section gives you tips on starting the engine under various conditions, and how to operate the manual and automatic transmissions. It also includes important information on parking your vehicle, the braking system, the vehicle stability assist (VSA ) system, the tire pressure monitoring system (TPMS), and facts you need if you are planning to tow a trailer.

Driving Guidelines ........................ Preparing to Drive ........................ Starting the Engine ....................... Manual Transmission ................... Automatic Transmission .............. Parking ........................................... Braking System ............................. Anti-lock Brakes (ABS) ............... Vehicle Stability Assist (VSA ),

. 254
. 255
. 256
. 257
. 260
. 264
. 265
. 266

aka Electronic Stability

Control (ESC), System

Tire Pressure Monitoring

........

. 268

System (TPMS)

Towing a Trailer

........................ ...........................

. 270
. 273

253

09/07/02 17:10:58 31SNA640_259

Driving Guidelines

Simodel Your vehicle is designed to give you optimum handling and performance on well-maintained roads. As part of this design, your vehicle has a minimum of ground clearance and very low-profile tires.

Use caution if you ever drive your vehicle on very rough or rutted roads. You could damage the suspension and underbody by bottoming out. Going too fast over parking lot ‘‘speed bumps’’ can also cause damage.

254

Because of the low-profile tires fitted to your vehicle, the alloy wheels are closer to the ground. Driving over a pothole or road debris at too high a speed can seriously damage a wheel. Slow down under these conditions.

Curbs and steep inclines could damage the front and rear bumpers. Low curbs that do not affect the average vehicle may be high enough to hit the bumper on your vehicle. The front or rear bumper may scrape when trying to drive onto an incline, such as a steep driveway or trailer ramps.

09/07/02 17:11:11 31SNA640_260

You should do the following checks and adjustments every day before you drive your vehicle.

1.

Make sure all windows, mirrors, and outside lights are clean and unobstructed. Remove frost, snow, or ice.

2.

Check that the hood and trunk are fully closed.

3.

Visually check the tires. If a tire looks low, use a gauge to check its pressure (see page

314

).

Preparing to Drive

Check that any items you may be carrying are stored properly or fastened down securely.

9.

Fasten your seat belt. Check that your passengers have fastened their seat belts (see page ).

14

Check the seat adjustment (see page

93

).

Check the adjustment of the inside and outside mirrors (see page

103

).

10.

When you start the engine, check the gauges and indicators in the ). instrument panel (see page

57

4.

5.

6.

7.

Check the steering wheel adjustment (see page 77

).

8.

Make sure the doors are securely closed and locked.

255

09/07/02 17:11:21 31SNA640_261

Starting the Engine

1.

Apply the parking brake.

4.

2.

3.

In cold weather, turn off all electrical accessories to reduce the drain on the battery.

Manualtransmission: Press the clutch pedal down all the way. The START (III) position does not function unless the clutch pedal is pressed.

Automatictransmission: Make sure the shift lever is in Park. Press on the brake pedal.

256

Without touching the accelerator pedal, turn the ignition key to the START (III) position. Do not hold the key in the START (III) position for more than 15 seconds at a time. If the engine does not start right away, pause for at least 10 seconds before trying again.

The engine is harder to start in cold weather. Also, the thinner air f ound at altitudes above 8,000 f eet (2,400
meters) adds to this problem.

The immobilizer system protects your vehicle f rom thef t. If an improperly coded key (or other device) is used, the engine’s f uel system is disabled. For more inf ormation, see page

.79

09/07/02 17:11:30 31SNA640_262

Manual Transmission

cause your clutch to wear out faster.

Come to a full stop before you shift into reverse. You can damage the transmission by trying to shift into reverse with the vehicle moving. Push down the clutch pedal, and pause for a few seconds before shifting into reverse, or shift into one of the forward gears for a moment. This stops the gears so they won’t ‘‘grind.’’

Onmodelswithmanualtransmission NOTE: Theenginecanbedamagedif youinadvertentlydownshiftintothe wronggear(forexample,goingfrom thirdgearathighrpmstosecondgear insteadofupshiftingtofourthgear;the enginespeedlimiterwillnotworkinthis situation).

CONTINUED

257

Except Si

Si

The manual transmission is synchronized in all forward gears for smooth operation. It has a lockout so you cannot shift directly from fifth to reverse.

On vehicles with 6-speed manual transmission, the lockout system prevents you from shifting directly from any forward gear to reverse while the vehicle is moving at a certain speed (see page ).

259

When shifting up or down, make sure you push the clutch pedal down all the way, shift to the next gear, and let the pedal up gradually. When you are not shifting, do not rest your foot on the clutch pedal. This can

09/07/02 17:11:40 31SNA640_263

Manual Transmission

When slowing down, you can get extra braking from the engine by shifting to a lower gear. This extra braking can help you maintain a safe speed and prevent your brakes from overheating while going down a steep hill. Before downshifting, make sure the engine speed will not go into the tachometer’s red zone in the lower gear.

Rapid slowing or speeding up can cause loss of control on slippery surfaces. If you crash, you can be injured.

Use extra care when driving on slippery surfaces.

OnSimodel Your vehicle is equipped with an aluminum shift lever. If you leave the vehicle parked outside for a long

258

time on a hot day, be careful before moving the shift lever. Because of the heat, the shift lever may be extremely hot. If the outside temperature is low, the shift lever feels cold.

Recommended Shift Points Drive in the highest gear that lets the engine run and accelerate smoothly. This will give you good fuel economy and effective emissions control. The following shift points are recommended:

With5-speedmanualtransmission

Shift up

Normal acceleration

1st to 2nd 2nd to 3rd 3rd to 4th 4th to 5th

15 mph (24 km/h) 27 mph (44 km/h) 39 mph (63 km/h) 53 mph (85 km/h)

With6-speedmanualtransmission

Shift up

Normal acceleration

1st to 2nd 2nd to 3rd 3rd to 4th 4th to 5th 5th to 6th

17 mph (27 km/h) 29 mph (46 km/h) 37 mph (60 km/h) 43 mph (69 km/h) 49 mph (79 km/h)

09/07/02 17:11:54 31SNA640_264

Engine Speed Limiter If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer’s red zone. If this occurs, you may feel the engine cut in and out. This is caused by a limiter in the engine’s computer controls. The engine will run normally when you reduce the rpm below the red zone.

Before downshifting, make sure the engine will not go into the tachometer’s red zone.

Reverse Lockout 6-speedmanualtransmission The manual transmission has a lockout so you cannot accidentally shift from any forward gear to reverse while the vehicle is moving at a certain speed. If you cannot shift to reverse when the vehicle is stopped, do the following:

OnSimodel Your vehicle has a rev limit indicator to show you when the engine speed is near the tachometer’s red zone (see page

64

).

Manual Transmission

2.

If you are still unable to shift to reverse, apply the parking brake, and turn the ignition key to the ACCESSORY (I) or LOCK (0) position.

3.

Press the clutch pedal, and shift to reverse.

4.

With the clutch pedal still pressed, start the engine.

If you need to use this procedure to shift to reverse, your vehicle may be developing a problem. Have the vehicle checked by your dealer.

1.

With the clutch pedal pressed, move the shift lever to the first/ second gear side of the neutral gate, then shift to reverse.

259

09/07/02 17:12:02 31SNA640_265

Automatic Transmission

Shift Lever Position Indicators

These indicators on the instrument panel show which position the shift lever is in.

The ‘‘D’’ indicator comes on for a few seconds when you turn the ignition switch to the ON (II) position. If it flashes while driving (in any shift position), it indicates a possible problem in the transmission.

260

If the malfunction indicator lamp comes on along with the ‘‘D’’ indicator, there is a problem with the automatic transmission control system. Avoid rapid acceleration, and have the transmission checked by your dealer as soon as possible.

Shifting

SHIFT LEVER

RELEASE BUTTON

To shift from Park to any position, press the brake pedal, the release button on the front of the shift lever, then pull the lever. You cannot shift out of Park when the ignition switch is in the LOCK (0) or the ACCESSORY (I) position.

09/07/02 17:12:12 31SNA640_266

Do this:

Press the brake pedal, and press the shift lever release button.

Press the shift lever release button.

Move the shift lever.

To shift from:

P to R

R to P N to R D to 2
2 to 1
1 to 2
2 to D D to D D to N D to D N to D R to N

−

This position mechani-

Park (P) cally locks the transmission. Use Park whenever you are turning off or starting the engine. To shift out of Park, you must press on the brake pedal and have your foot off the accelerator pedal. Press the release button on the front of the shift lever to move it.

If you have done all of the above and still cannot move the lever out of Park, see on page 263

Shift Lock Release

To avoid transmission damage, come to a complete stop before shifting into Park. You must also press the release button to shift into Park. The shift lever must be in Park before you can remove the key from the ignition switch.

−

Reverse (R) pedal and press the release button to shift from Park to reverse. To shift

Press the brake

Automatic Transmission

from reverse to neutral, come to a complete stop and then shift. Press the release button before shifting into reverse from neutral.

−

Use neutral if you

Neutral (N) need to restart a stalled engine, or if it is necessary to stop briefly with the engine idling. Shift to the Park position if you need to leave your vehicle for any reason. Press on the brake pedal when you are moving the shift lever from neutral to another gear.

−

Use this position for

Drive (D) your normal driving. The transmission automatically selects a suitable gear (1 through 5) for your speed and acceleration. You may notice the transmission shifting up at higher engine speeds when the engine is cold. This helps the engine warm up faster.

CONTINUED

261

09/07/02 17:12:22 31SNA640_267

Automatic Transmission

−

This position is

Drive (D ) similar to D, except only the first three gears are selected. Use D when towing a trailer in hilly terrain, or to provide engine braking when going down a steep hill. D can also keep the transmission from cycling between third, fourth, and fifth gears in stop-and-go driving.

262

Engine Speed Limiter If you exceed the maximum speed for the gear you are in, the engine speed will enter into the tachometer’s red zone. If this occurs, you may feel the engine cut in and out. This is caused by a limiter in the engine’s computer controls. The engine will run normally when you reduce the rpm below the red zone.

−

To shift to second,

Second (2) press the release button on the front of the shift lever. This position locks the transmission in second gear. It does not downshift to first gear when you come to a stop.

Use second gear:

For more power when climbing.

To increase engine braking when going down steep hills.

For starting out on a slippery surface or in deep snow.

To help reduce wheel spin.

−

First (1) To shift from second to first, press the release button. This position locks the transmission in first gear. By upshifting and downshifting through 1, 2, D , and D, you can operate the transmission much like a manual transmission without a clutch pedal.

09/07/02 17:12:35 31SNA640_268

Shift Lock Release Do this if pushing on the brake pedal and pressing the release button does not let you shift the transmission out of Park:

1.

Set the parking brake.

2.

Remove the key from the ignition switch.

3.

Put a cloth on the notch of the shift lock release slot cover to prevent scratches. Using a small flat-tip screwdriver or a metal fingernail file, carefully pry on the notch of the cover to remove it.

Automatic Transmission

RELEASE BUTTON

NOTCH

COVER

SHIFT LOCK RELEASE SLOT

4.

Insert the built-in key into the shift lock release slot.

6.

5.

Push down on the key while you press the release button on the shift lever and move the lever out of Park to neutral.

Remove the key from the shift lock release slot, then reinstall the cover. Make sure the notch on the cover is on the shift lever side. Return the key to the ignition switch, press the brake pedal, and restart the engine.

If you need to use the shift lock release, it means your vehicle is developing a problem. Have it checked by your dealer.

263

09/07/02 17:12:47 31SNA640_269

Parking

Always use the parking brake when you park your vehicle. Make sure the parking brake is set firmly, or your vehicle may roll if it is parked on an incline.

If your vehicle has an automatic transmission, set the parking brake before you put the transmission in Park. This keeps the vehicle from moving and putting pressure on the parking mechanism in the transmission.

264

Parking Tips

Make sure the moonroof (if equipped) and the windows are closed.

Turn off the lights.

Place any packages, valuables, etc., in the trunk or take them with you.

Lock the doors.

Onvehicleswithsecuritysystem Check the indicator on the instrument panel to verify that the security system is set.

Never park over dry leaves, tall grass, or other flammable materials. The hot three way catalytic converter could cause these materials to catch on fire.

If the vehicle is facing uphill, turn the front wheels away from the curb. If you have a manual transmission, put it in first gear.

If the vehicle is facing downhill, turn the front wheels toward the curb. If you have a manual transmission, put it in reverse gear.

Make sure the parking brake is fully released before driving away. Driving with the parking brake partially set can overheat or damage the rear brakes.

Never install a sunshade between the upper and lower meters on the instrument panel. If you do, you could cause heat damage to the upper meter on a very hot day.

09/07/02 17:12:55 31SNA640_270

Check the brakes after driving through deep water. Apply the brakes moderately to see if they feel normal. If not, apply them gently and frequently until they do. Be extra cautious in your driving.

Braking System Design The hydraulic system that operates the brakes has two separate circuits. Each circuit works diagonally across the vehicle (the left-front brake is connected with the right-rear brake, etc.). If one circuit should develop a problem, you will still have braking at two wheels.

Your vehicle is equipped with front disc brakes. The brakes on the rear wheels may be disc or drum, depending on the model. A power assist helps reduce the effort needed on the brake pedal. The anti-lock brake system (ABS) helps you retain steering control when braking very hard.

Resting your foot on the pedal keeps the brakes applied lightly, builds up heat, reduces their effectiveness and reduces brake pad life. In addition, fuel economy can be reduced. It also keeps your brake lights on all the time, confusing drivers behind you.

Constant application of the brakes when going down a long hill builds up heat and reduces their effective- ness. Use the engine to assist the brakes by taking your foot off the accelerator and downshifting to a lower gear.

Braking System

Brake Pad Wear Indicators If the brake pads need replacing, you will hear a distinctive, metallic screeching sound when you apply the brake pedal. If you do not have the brake pads replaced, they will screech all the time. It is normal for the brakes to occasionally squeal or squeak when you apply them.

265

You will feel a pulsation in the brake pedal when the ABS activates, and you may hear some noise. This is normal: it is the ABS rapidly pumping the brakes. On dry pavement, you will need to press on the brake pedal very hard before the ABS activates. However, you may feel the ABS activate immediately if you are trying to stop on snow or ice.

09/07/02 17:13:05 31SNA640_271

Anti-lock Brakes (ABS)

The anti-lock brake system (ABS) helps prevent the wheels from locking up, and helps you retain steering control by pumping the brakes rapidly, much faster than a person can do it.

The electronic brake distribution (EBD) system, which is part of the ABS, also balances the front-to-rear braking distribution according to vehicle loading.

Youshouldneverpumpthebrakepedal. Let the ABS work for you by always keeping firm, steady pressure on the brake pedal. This is sometimes referred to as ‘‘stomp and steer.’’

266

ABS Indicator

If this indicator comes on, the anti- lock function of the braking system has shut down. The brakes still work like a conventional system, but without anti-lock. You should have your dealer inspect your vehicle as soon as possible.

If the indicator comes on while driving, test the brakes as instructed on page

341

09/07/02 17:13:14 31SNA640_272

If the ABS indicator and the brake system indicator come on together, and the parking brake is fully released, the EBD system may also be shut down.

Important Safety Reminders ABS does not reduce the time or distance it takes to stop the vehicle. It only helps with the steering control during braking.

A vehicle with ABS may require a longer distance to stop on loose or uneven surfaces, such as gravel or snow, than a vehicle without anti- lock.

Anti-lock Brakes (ABS)

341

. If the brakes feel normal,

Test your brakes as instructed on page drive slowly and have your vehicle repaired by your dealer as soon as possible. Avoid sudden hard braking which could cause the rear wheels to lock up and possibly lead to a loss of control.

OnvehicleswithVSAsystem The VSA indicator will come on along with the ABS indicator.

ABS will not prevent a skid that results from changing direction abruptly, such as trying to take a corner too fast or making a sudden lane change. Always drive at a safe speed for the road and weather conditions.

ABS cannot prevent a loss of stability. Always steer moderately when you are braking hard. Severe or sharp steering wheel movement can still cause your vehicle to veer into oncoming traffic or off the road.

267

09/07/02 17:13:25 31SNA640_273

Vehicle Stability Assist (VSA ), aka Electronic Stability Control (ESC), System

VSA Activation Indicator

When VSA activates, you will see the VSA Activation indicator blinks.

Vehicle Stability Assist (VSA) System Indicator

If this indicator comes on while driving, pull to the side of the road when it is safe, and turn off the engine. Reset the system by restarting the engine. If the VSA system indicator stays on or comes back on while driving, have the VSA system inspected by your dealer.

The main function of the