2011 Honda Civic Coupe Owners Manual

(AM/FM) button until the displayed time begins to blink, then release the button.

Change the hours by pressing the H (preset 1) button until the numbers advance to the desired time. Change the minutes by pressing the M (preset 2) button until the numbers advance to the desired time.

Press the CLOCK (AM/FM) button again to enter the set time.

You can quickly set the time to the nearest hour. If the displayed time is before the half hour, pressing the CLOCK (AM/FM) button until you hear a beep, then pressing the R (preset 3) button sets the clock back to the previous hour. If the displayed time is after the half hour, the clock sets forward to the beginning of the next hour.

222

U.S. LX, and Canadian DX-G and SE models Optional for U.S. DX model

EX, EX-L and Si models

CLOCK BUTTON

CLOCK BUTTON

H (HOUR) BUTTON

R (RESET) BUTTON M (MINUTE) BUTTON

R (RESET) H (HOUR) BUTTON BUTTON M (MINUTE) BUTTON

For example:

1:06 will reset to 1:00
1:52 will reset to 2:00

Onmodelswithnavigationsystem The navigation system receives signals from the global positioning system (GPS), and the displayed time is updated automatically by the GPS. Refer to the navigation system manual for how to adjust the time.

10/06/24 16:50:15 31SVA650_228

Ifequipped The security system helps to protect your vehicle and valuables from theft. The horn sounds and a combination of headlights, parking lights, side marker lights, and taillights flashes if someone attempts to break into your vehicle or remove the radio. This alarm continues for 2 minutes, then the system resets. To reset an activated system before the 2
minutes have elapsed, unlock the driver’s door with the key or the remote transmitter.

The security system automatically sets 15 seconds after you lock the doors, hood, and trunk. For the system to activate, you must lock the doors from the outside with the key, lock tab, door lock switch, or remote transmitter. The security system indicator on the instrument panel starts blinking immediately to show you the system is setting itself.

SECURITY SYSTEM INDICATOR

Once the security system is set, opening either door without using the key or the remote transmitter, the hood, or the trunk will cause the alarm to activate. It will also activate if the audio unit is removed from the dashboard or the wiring is cut.

With the system set, you can still open the trunk with the master key (U.S. LX model) or the remote transmitter (U.S. EX, EX-L and Si models) without triggering the alarm.

Security System

The alarm will sound if the trunk lock is forced, or the trunk is opened with the trunk release handle or the emergency trunk opener.

The security system will not set if the hood, trunk, or either door is not fully closed. If the system will not set, turn the ignition switch to the ON (II) position, and check the indicators on the instrument panel. Close either door or the trunk indicated on the display. Check the hood visually since it is not part of the display, and shut it if necessary.

Use the remote transmitter NOTE: to quickly check that the hood, the trunk, and both doors are closed. Push the lock button twice within 5
seconds. There should be an audible confirmation beep.

Do not attempt to alter this system or add other devices to it.

223

10/06/24 16:50:23 31SVA650_229

Cruise Control

Ifequipped Cruise control allows you to maintain a set speed above 25 mph (40 km/h) without keeping your foot on the accelerator pedal. It should be used for cruising on straight, open highways. It is not recommended for city driving, winding roads, slippery roads, heavy rain, or bad weather.

Improper use of the cruise control can lead to a crash.

Use the cruise control only when traveling on open highways in good weather.

224

3.

Press and release the SET/ DECEL button on the steering wheel. The CRUISE CONTROL indicator on the instrument panel comes on to show the system is now activated.

Cruise control may not hold the set speed when you are going up and down hills. If your vehicle speed increases going down a hill, use the brakes to slow down. This will cancel the cruise control. To resume the set speed, press the RES/ACCEL button. The CRUISE CONTROL indicator on the instrument panel will come back on.

Using Cruise Control

CRUISE BUTTON

RES/ACCEL

SET/DECEL

CANCEL BUTTON

1.

Push the CRUISE button on the steering wheel. The CRUISE MAIN indicator on the instrument panel comes on.

The cruise control system can be left on, even when it is not in use.

2.

Accelerate to the desired cruising speed above 25 mph (40 km/h).

10/06/24 16:50:32 31SVA650_230

Changing the Set Speed You can increase the set cruising speed in any of these ways:

Press and hold the RES/ACCEL button. When you reach the desired cruising speed, release the button.

Push on the accelerator pedal until you reach the desired cruising speed, then press the SET/ DECEL button.

To increase the speed in very small amounts, tap the RES/ ACCEL button. Each time you do this, your vehicle speeds up about 1 mph (1.6 km/h).

Cruise Control

You can decrease the set cruising speed in any of these ways:

If you need to decrease your NOTE: speed quickly, use the brakes as you normally would.

Even with the cruise control turned on, you can still use the accelerator pedal to speed up for passing. After completing the pass, take your foot off the accelerator pedal. The vehicle will return to the set cruising speed.

Press and hold the SET/DECEL button. Release the button when you reach the desired speed.

Resting your foot on the brake or clutch pedal causes the cruise control to cancel.

To slow down in very small amounts, tap the SET/DECEL button. Each time you do this, your vehicle will slow down about 1 mph (1.6 km/h).

Tap the brake or clutch pedal lightly with your foot. The CRUISE CONTROL indicator on the instrument panel goes out. When the vehicle slows to the desired speed, press the SET/ DECEL button.

225

10/06/24 16:50:38 31SVA650_231

Cruise Control

Canceling Cruise Control You can cancel cruise control in any of these ways:

Tap the brake or clutch pedal.

Push the CANCEL button on the steering wheel.

Push the CRUISE button on the steering wheel.

Resuming the Set Speed When you push the CANCEL button, or tap the brake or clutch pedal, the system remembers the previously set cruising speed. To return to that speed, accelerate to above 25 mph (40 km/h) and then press and release the RES/ACCEL button. The CRUISE CONTROL indicator comes on, and the vehicle accelerates to the same cruising speed as before.

Pressing the CRUISE button turns the system off and erases the previous cruising speed.

226

10/07/05 13:34:14 31SVA650_232

HandsFreeLink (HFL)

Onmodelswithnavigationsystem Bluetooth allows you to place and receive phone calls using voice commands, without handling your cell phone.

To use HFL, you need a Bluetooth- compatible cell phone. For a list of compatible phones, pairing procedures, and special feature capabilities:

In the U.S., visit com

or call (888) 528-7876.

handsfreelink.honda.

Bluetooth HandsFreeLink

Using HFL HFLButtons

VoiceControlTips

HFL TALK BUTTON

NAVI VOICE CONTROL BUTTONS

HFL BACK BUTTON

HFL Talk button release to give a command or answer a call.

Press and

−

−

HFL Back button release to end a call, go back to the previous command, or cancel the command.

Press and

MICROPHONE

Air or wind noise from the dashboard and side vents, windows and moonroof may interfere with the microphone. Adjust or close them as necessary.

CONTINUED

227

Many commands can be spoken together. For example, you can say ‘‘Call 123-456- ’’ or ‘‘Dial Peter.’’

＃＃＃＃

When HFL is in use, navigation voice commands cannot be recognized.

To change the volume level of HFL, use the audio system volume knob or the steering wheel volume controls.

HelpFeatures

To hear general HFL information, including help on pairing a phone or setting up the system, say ‘‘Tutorial.’’

For help at any time, including a list of available commands, say ‘‘Hands free help.’’

10/06/24 16:50:56 31SVA650_233

Bluetooth HandsFreeLink

Press and release the HFL Talk button each time you want to make a command. After the beep, speak in a clear, natural tone.

Try to reduce all background noise. If the microphone picks up voices other than yours, commands may be misinterpreted.

228

10/06/24 16:51:04 31SVA650_234

Information Display

Bluetooth HandsFreeLink

BLUETOOTH INDICATOR

A notification that there is an incoming call, or HFL is in use, will appear on the navigation screen when the audio system is on.

HFL MESSAGE

When there is an incoming call, or HFL is in use, ‘‘HFL’’ will appear at the bottom of the map screen.

’’ indicator will be displayed on

‘‘ the audio display when a phone is linked.

However, when the current street is shown, and AUDIO INFO icon is visible, ‘‘HFL’’ will not appear when there is an incoming call.

229

10/06/24 16:51:11 31SVA650_235

Bluetooth HandsFreeLink

How to Use HFL

The ignition switch must be in the ACCESSORY (I) or ON (II) position.

‘‘Pair’’

‘‘Edit’’

Pair a phone to the system(See page 233)

Edit the name of a paired phone

(See page 234)

‘‘Phone Setup’’

‘‘Delete’’

Delete a paired phone from the system

(See page 234)

Press HFL Talk button

‘‘List’’

‘‘Status’’

‘‘Next Phone’’

Hear a list of all phones paired to the system Hear which paired phone is currently linked to the system (See page 235) Search for another previously paired phone to link to

(See page 234)

(See page 235)

‘‘Set Pairing Code’’

Set the pairing code to a ‘‘Fixed’’ or ‘‘Random’’ number (See page 235)

‘‘Call’’ or ‘‘Dial’’

‘‘123-456-

＃＃＃＃

’’

Enter desired phone number

(See page 236)

‘‘Jim Smith’’

Once a phonebook entry is stored, you can say a name here. (See page 236)

Press and release the HFL Talk button each time you give a command.

230

10/06/24 16:51:18 31SVA650_236

Bluetooth HandsFreeLink

‘‘Redial’’

‘‘Transfer’’

‘‘Mute’’

‘‘Send’’

Redial the last number called

(See page 237)

Transfer a call from HFL to your phone, or from your phone to HFL

(See page 239)

Mute your voice to the person at the other end of the call

(See page 240)

Send numbers or names during a call

(See page 240)

Press HFL Talk button

‘‘Store’’

‘‘Edit’’

Store a phonebook entry

(See page 241)

Edit the number of an existing phonebook entry

(See page 241)

‘‘Phonebook’’

‘‘Delete’’

Delete a phonebook entry

(See page 242)

‘‘Receive Contact’’

‘‘List’’

If your phone supports this function, use this to transfer contacts from your phone to HFL

(See page 242)

Hear a list of all stored phonebook entries

(See page 242)

Press and release the HFL Talk button each time you give a command.

CONTINUED 231

10/07/05 13:34:20 31SVA650_237

Bluetooth HandsFreeLink

‘‘System Set up’’

Press HFL Talk button

‘‘Security’’

Apply a security passcode to the system that must be input at each key cycle to access the system

(See page 247)

‘‘Change Passcode’’

Change your security passcode

(See page 248)

‘‘Call Notification’’

‘‘Auto Transfer’’

Set how you would like to be notified of an incoming call (See page 248)

Set calls to automatically transfer from your phone to HFL when you enter the vehicle

(See page 248)

‘‘Clear’’

Clear the system of all paired phones, phonebook entries and security passcode

(See page 249)

‘‘Tutorial’’

Hear a tutorial for general rules on using the system

(See page 228)

‘‘Hands Free Help’’

Hear a list of available commands and additional information describing each command (See page 228)

Press and release the HFL Talk button each time you give a command.

232

10/06/24 16:51:34 31SVA650_238

Bluetooth HandsFreeLink

To use HFL, you need to pair your Bluetooth-compatible cell phone to the system.

Phone Setup This command group is available for paired cell phones.

Phonepairingtips

You cannot pair your phone while the vehicle is moving.

Your phone must be in discovery or search mode to pair. Refer to your phone’s manual.

Up to six phones can be paired.

Your phone’s battery may drain faster when it is paired to HFL.

If after three minutes your phone is not ready to pair or a phone is not found, the system will time out and return to idle.

Topairacellphone: 1.

Press and release the HFL Talk button. If you are pairing a phone for the first time, HFL will give you information about the pairing process. If it is not the first phone you are pairing, say ‘‘ setup Pair

Phone .’’

’’ and say ‘‘

2.

Follow the HFL prompts and put your phone in discovery or search mode. HFL will give you a 4-digit pairing code and begin searching for your phone.

3.

When your phone finds a Bluetooth device, select HFL from the options and enter the 4-digit code from the previous step.

4.

Follow the HFL prompts and name the newly paired phone.

CONTINUED

233

10/06/24 16:51:45 31SVA650_239

Bluetooth HandsFreeLink

Torenameapairedphone: Press and release the HFL Talk button before a command.

Todeleteapairedphone: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Phone setup

.’’

1.

Say ‘‘

Phone setup

.’’

Say ‘‘

Delete

’’ after the prompts.

HFL will ask you which phone you want to delete. Follow the HFL prompts to continue with the deletion.

2.

Say ‘‘

Edit

’’ after the prompts.

3.

If there is more than one phone paired to the system, HFL will ask you which phone’s name you want to change. Follow the HFL prompts and rename the phone.

2.

3.

234

Tohearthenamesofallpaired phones: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Phone setup

.’’

2.

Say ‘‘

List

’’ after the prompts.

3.

HFL will read out all the paired phone’s names.

10/06/24 16:52:02 31SVA650_240

Tohearwhichpairedphoneis currentlylinked: Press and release the HFL Talk button before a command.

Tochangefromthecurrentlylinked phonetoanotherpairedphone: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Phone setup

.’’

1.

Say ‘‘

Phone setup

.’’

2.

3.

Say ‘‘

Status

’’ after the prompts.

HFL will tell you which phone is linked to the system.

2.

3.

4.

Next phone

’’ after the

Say ‘‘ prompts.

HFL disconnects the linked phone and searches for another paired phone.

Once another phone is found, it is linked to the system. HFL will inform you which phone is now linked.

Bluetooth HandsFreeLink

Tochangethepairingcodesetting: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Phone setup

.’’

2.

3.

Set pairing code

’’ after the

Say ‘‘ prompts.

If you want HFL to create a random code each time you pair a phone, say ‘‘ .’’ If you want to choose your own 4-digit code to be used each time, say ‘‘ and follow the HFL prompts.

Random

Fixed ’’

If no other phones are found or paired, HFL will inform you that the original phone is linked again.

235

10/06/24 16:52:13 31SVA650_241

Bluetooth HandsFreeLink

Making a Call You can make calls using any phone number or a name in the HFL phonebook. You can also redial the last number called.

Bluetooth is the wireless technology that links your phone to HFL. HFL uses a Class 2 Bluetooth, which means the maximum range between your phone and vehicle is 30 feet (10
meters).

During a call, HFL allows you to talk up to 30 minutes after you remove the key from the ignition switch. However, this may weaken the vehicle’s battery.

236

Tomakeacallusingaphone number: Press and release the HFL Talk button before a command.

Tomakeacallusinganameinthe HFLphonebook: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Call

’’ or ‘‘

Dial

.’’

1.

Say ‘‘

Call

’’ or ‘‘

Dial

.’’

2.

Follow the HFL prompts and say the phone number you want to dial.

3.

Follow the HFL prompts to confirm the number and say Call ‘‘

’’ or ‘‘

Dial

.’’

Once connected, you will hear the person you called through the audio speakers.

2.

3.

Follow the HFL prompts and say the name stored in the HFL phonebook that you want to call.

Follow the HFL prompts to confirm the name and make the call.

10/06/24 16:52:21 31SVA650_242

Toredialthelastnumbercalledby HFL: Press and release the HFL Talk button and say ‘‘

Redial

.’’

Bluetooth HandsFreeLink

Tomakeacallfromanimported phonebook:

1.

Press the INFO button, then select Cellular Phonebook ‘‘

.’’

3.

Select a phonebook you want to choose a phone number from.

2.

Select ‘‘ Phonebook

.’’

Search Imported

If the phonebook you select is PIN- protected, you will need to enter the PIN to access it. See page more information.

245

for

CONTINUED

237

10/06/24 16:52:29 31SVA650_243

Bluetooth HandsFreeLink

List ICON

To search for a specific name in the phonebook, enter the keyword for either the first or last name.

4.

Select the name. All the phone numbers stored for that name will be listed.

To display all names in the List phonebook, select the ‘‘

’’ option.

5.

Select the desired number to call from the list.

238

Store in

Selecting ‘‘ HandsFreeLink number will be stored in HFL, so that you can call it using HFL’s name tag by voice.

,’’ the phone

10/06/24 16:52:36 31SVA650_244

Receiving a Call When you receive a call, an incoming call notification (if activated) will play and interrupt the audio system if it is on.

CallWaiting If your phone has Call Waiting, press and release the HFL Talk button to put the original call on hold and answer the incoming call.

Press the HFL Talk button to answer the call, or the HFL Back button to hang up.

To return to the original call, press the HFL Talk button again. If you don’t want to answer the incoming call, disregard it and continue with your original call. If you want to hang up the original call and answer the new call, press the HFL Back button.

Bluetooth HandsFreeLink

Transferring a Call You can transfer a call from HFL to your phone, or from your phone to HFL.

Press and release the HFL Talk button and say ‘‘

Transfer

.’’

239

10/06/24 16:52:46 31SVA650_245

Bluetooth HandsFreeLink

Muting a Call You can mute your voice to the person you are talking to during a call.

To mute your voice during a call, press and release the HFL Talk button and say ‘‘

Mute

.’’

To unmute your voice, press and release the HFL Talk button and say Mute ‘‘

’’ again.

240

Phonebook You can store up to 50 names with their associated numbers in HFL. The numbers you store can be not only phone numbers but other types, such as account numbers or passwords, which can be sent during a menu-driven call.

Send Numbers or Names During a Call HFL allows you to send numbers or names during a call. This is useful when you call a menu-driven phone system.

Tosendanameornumberduringa call: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Send

.’’

2.

Follow the HFL prompts and say the name or number you want to send.

3.

Follow the HFL prompts to send the tones and continue the call.

To send a pound (

NOTE: ‘‘pound.’’ To send a star (*), say ‘‘star.’’

), say

＃

10/06/24 16:52:59 31SVA650_246

Tostoreaphonebookentry: Press and release the HFL Talk button before a command.

NOTE:

Avoid using duplicate name entries.

Toeditthenumberstoredinaname: Press and release the HFL Talk button before a command.

Bluetooth HandsFreeLink

1.

Say ‘‘

Phonebook

.’’

2.

3.

Say ‘‘

Store

’’ after the prompts.

Say a name you want to list as your phonebook entry.

4.

Say the number you want to store for the name entry.

5.

Follow the HFL prompts and say Enter ‘‘

’’ to store the entry.

Avoid using ‘‘home’’ as a name entry.

It is easier for HFL to recognize a multisyllabic or longer name. For example, use ‘‘Peter’’ instead of ‘‘Pete,’’ or ‘‘John Smith’’ instead of ‘‘John.’’

1.

Say ‘‘

Phonebook

.’’

2.

Say ‘‘

Edit

’’ after the prompts.

3.

Follow the HFL prompts and say the name entry you want to edit.

4.

When asked, say the new number for that name.

5.

Follow the HFL prompts to complete the edit.

CONTINUED

241

10/06/24 16:53:12 31SVA650_247

Bluetooth HandsFreeLink

Todeleteaname: Press and release the HFL Talk button before a command.

Tolistallnamesinthephonebook: Press and release the HFL Talk button before a command.

1.

Say ‘‘

Phonebook

.’’

1.

Say ‘‘

Phonebook

.’’

2.

3.

Say ‘‘

Delete

’’ after the prompts.

Say the name you want to delete and follow the HFL prompts to complete the deletion.

2.

Say ‘‘

List

’’ after the prompts.

3.

HFL begins reading the names in the order they were stored.

4.

If you hear a name you want to call, immediately press the HFL Talk button and say ‘‘

Call

.’’

Tostoreaspecificphonenumber fromyourcellphonedirectlytothe HFLphonebook(availableonsome phones): Press and release the HFL Talk button before a command.

1.

Say ‘‘

Phonebook

.’’

2.

3.

4.

Receive contact

Say ‘‘ prompts.

’’ after the

Follow the HFL prompts, select a number from your cell phone, and send it to HFL.

Follow the HFL prompts and name the number, or say Discard ‘‘ you want to store.

’’ if it is not the number

5.

Follow the HFL prompts if you want to store another number.

242

10/07/05 13:36:09 31SVA650_248

Cellular Phonebook (availableonsomephones) Cellular Phonebook If you select from the Information screen menu, you will see four HFL options.

For a list of cell phones that are compatible with this feature:

In the U.S., visit com

or call (888) 528-7876.

handsfreelink.honda.

Bluetooth HandsFreeLink

ImportCellularPhonebook: The entire phonebook data of the cell phone that is linked to HFL can be imported to the navigation system.

SearchImportedPhonebook: Once a phonebook has been imported, you can search the phone numbers by the person’s name.

IMPORTED PHONEBOOK

PIN ICON

IMPORTED DATE

Import Cellular

Select ‘‘ Phonebook ,’’ and HFL will begin importing the phonebook. Select OK ‘‘

’’ after the import is completed.

Search Imported

Select ‘‘ Phonebook phonebooks will be displayed.

,’’ and a list of imported

Select a phonebook from the list.

CONTINUED

243

10/06/24 16:53:36 31SVA650_249

Bluetooth HandsFreeLink

Select a person from the list. Up to three category icons are displayed in the left side of the list:

Fax

Car

Voice

Other

Preference

Home

Mobile

Work

Pager

These indicate how many numbers are stored for the name. If a name has more than three category icons, ‘‘…’’ is displayed.

Select the person’s number you want to call, and press the HFL Talk button.

If the phonebook is PIN-protected, you will need to enter the 4-digit PIN.

List ICON

To search for a specific name in the phonebook, enter the keyword for either the first or last name.

To display all names in the List phonebook, select the ‘‘

’’ option.

244

10/06/24 16:53:46 31SVA650_250

DeleteImportedPhonebook: You can delete any imported phonebook.

After making a selection, the following screen will appear.

PIN Number You can add, change, or remove a PIN number from any phonebook.

Bluetooth HandsFreeLink

Delete Imported

Select ‘‘ Phonebook phonebooks will be displayed.

,’’ and a list of imported

Select a phonebook you want to delete. If the phonebook is PIN- protected, you will need to enter the 4-digit PIN number.

Yes Select ‘‘ the deletion.

,’’ then ‘‘

OK

’’ to complete

ToaddaPIN: If you have selected a phonebook without a PIN, you will see the above display.

Enter the new 4-digit PIN. You will have to re-enter the PIN for confirmation.

CONTINUED

245

PIN number

ToremoveaPIN: Select ‘‘ Do not use PIN ‘‘ the current PIN.

,’’ then select ’’ after you enter

10/06/24 16:53:54 31SVA650_251

Bluetooth HandsFreeLink

TochangethePINtoanewnumber:

Select the phonebook you want. The display will change as shown above.

The display will change as shown above.

Enter the current PIN for this phonebook.

Enter the new 4-digit PIN number. You will be asked to re-enter the PIN for verification.

246

10/06/24 16:54:02 31SVA650_252

System Setup This command group allows you to change or customize HFL basic settings.

Toseta4-digitpasscodetolockthe HFLsystemforsecuritypurposes: Press and release the HFL Talk button before a command.

1.

Say ‘‘

System setup

.’’

2.

Say ‘‘

Security

’’ after the prompts.

3.

Follow the HFL prompts and say the 4-digit passcode you want to set.

4.

Follow the HFL prompts to confirm the number.

Bluetooth HandsFreeLink

Once a passcode is set, you NOTE: will need to enter it to use HFL each time you start the vehicle. If you forget the code, your dealer will have to reset it for you, or you will have to clear the entire system (see page 249

).

CONTINUED

247

10/06/24 16:54:14 31SVA650_253

Bluetooth HandsFreeLink

Tochangeyoursecuritypasscode: Press and release the HFL Talk button before a command.

1.

2.

Say ‘‘

System setup

.’’

Change passcode

’’ after the

Say ‘‘ prompts.

3.

Follow the HFL prompts and say the new 4-digit passcode.

4.

Follow the HFL prompts to confirm the number.

248

Toselecteitheraringtoneora promptastheincomingcall notification : Press and release the HFL Talk button before a command.

＊

1.

2.

3.

Say ‘‘

System setup

.’’

Call notification

’’ after the

Say ‘‘ prompts.

Follow the HFL prompts and say Ring tone Prompt ‘‘ .’’ You ’’ for no audible can also say ‘‘ incoming call notification.

’’ or ‘‘ Off

＊

The default setting is a ring tone.

Toactivateordeactivatetheauto transferfunction: If you get into the vehicle while you are on the phone, the call can be automatically transferred to HFL with the ignition switch in the ACCESSORY (I) or ON (II) position.

Press and release the HFL Talk button before a command.

1.

2.

3.

Say ‘‘

System setup

.’’

Auto transfer

Say ‘‘ prompts.

’’ after the

HFL will let you know if auto transfer is on or off, depending on the previous setting. Follow the HFL prompts to change the setting.

10/07/05 13:36:17 31SVA650_254

Toclearthesystem: This operation clears the passcodes, paired phones, all names in the HFL phonebook, and all imported phonebook data.

Press and release the HFL Talk button before a command.

Bluetooth

Wireless Technology name and logos are

Bluetooth The registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Honda Motor Co., Ltd. is under license. Other trademarks and trade names are those of their respective owners.

1.

Say ‘‘

System setup

.’’

2.

Say ‘‘

Clear

’’ after the prompts.

3.

Follow the HFL prompts to continue to complete the clearing procedure.

You can also clear the system when you have forgotten the passcode and cannot access HFL. When HFL asks you for the passcode, say ‘‘ clear the HFL phonebook and all imported phonebook data will be lost.

System .’’ Paired phones, all names in

Bluetooth HandsFreeLink

AsrequiredbytheFCC: ThisdevicecomplieswithPart15ofthe FCCrules.Operationissubjecttothe followingtwoconditions:(1)Thisdevice maynotcauseharmfulinterference,and (2)thisdevicemustacceptany interferencereceived,including interferencethatmaycauseundesired operation.

Changesormodificationsnotexpressly approvedbythepartyresponsiblefor compliancecouldvoidtheuser’s authoritytooperatetheequipment.

249

10/07/05 13:36:19 31SVA650_255

250

10/06/24 16:54:39 31SVA650_256

Before Driving

Before you begin driving your vehicle, you should know what gasoline to use and how to check the levels of important fluids. You also need to know how to properly store luggage or packages. The information in this section will help you. If you plan to add any accessories to your vehicle, please read the information in this section first.

Break-in Period Fuel Recommendation Service Station Procedures

............................. ................. ......... ....................................

Refueling Opening and Closing

. 252
. 252
. 253
. 253

the Hood

Oil Check Engine Coolant Check

. 254
. 255
. 257
Fuel Economy . 258
Accessories and Modifications . 261
Carrying Cargo . 263

................................ ................................... ............. ............................... ... .............................

251

10/06/24 16:54:49 31SVA650_257

Break-in Period, Fuel Recommendation

Break-in Period Help assure your vehicle’s future reliability and performance by paying extra attention to how you drive during the first 600 miles (1,000 km). During this period:

Avoid full-throttle starts and rapid acceleration.

Do not change the oil until the scheduled maintenance time.

Avoid hard braking for the first 200 miles (300 km).

You should also follow these recommendations with an overhauled or exchanged engine, or when the brakes are replaced.

Fuel Recommendation AllmodelsexceptSi Your vehicle is designed to operate on unleaded gasoline with a pump octane number of 87 or higher. Use of a lower octane gasoline can cause a persistent, heavy, metallic rapping noise that can lead to engine damage.

Simodelonly Your vehicle is designed to operate on premium unleaded gasoline with a pump octane number of 91 or higher. Use of a lower octane gasoline can cause occasional metallic knocking noises in the engine and will result in decreased engine performance. Use of a gasoline with a pump octane number less than 87 can lead to engine damage.

252

You may hear a knocking noise from the engine if you drive the vehicle at low engine speed (below about 1,000
rpm) in a higher gear. To stop this, raise the engine speed by shifting to a lower gear.

We recommend using quality gasolines containing detergent additives that help prevent fuel system and engine deposits.

In addition, in order to maintain good performance, fuel economy, and emissions control, we strongly recommend, in areas where it is available, the use of gasoline that does NOT contain manganese-based fuel additives such as MMT.

Use of gasoline with these additives may adversely affect performance, and cause the malfunction indicator lamp on your instrument panel to come on. If this happens, contact your authorized dealer for service.

10/06/24 16:54:59 31SVA650_258

Some gasoline today is blended with oxygenates such as ethanol or MTBE. Your vehicle is designed to operate on oxygenated gasoline containing up to 10% ethanol by volume and up to 15% MTBE by volume. Do not use gasoline containing methanol.

If you notice any undesirable operating symptoms, try another service station or switch to another brand of gasoline.

For further important fuel-related information for your vehicle, or information on gasoline that does not contain MMT, visit Owner Link at . In Canada, visit owners.honda.com www.honda.ca information on gasoline.

for additional

Refueling

Push

1.

Park with the driver’s side closest to the service station pump.

2.

Open the fuel fill door by pushing on the handle to the left of the driver’s seat.

Service Station Procedures

Gasoline is highly flammable and explosive. You can be burned or seriously injured when handling fuel.

Stop the engine, and keep heat, sparks, and flame away. Handle fuel only outdoors. Wipe up spills immediately.

TETHER

HOLDER

FUEL FILL CAP

CONTINUED

253

10/06/24 16:55:06 31SVA650_259

Service Station Procedures

3.

4.

Remove the fuel fill cap slowly. You may hear a hissing sound as pressure inside the tank equalizes. The fuel fill cap is attached to the fuel filler with a tether. Place the cap in the holder on the fuel fill door.

Stop filling the tank after the fuel nozzle automatically clicks off. Do not try to ‘‘top off’’ the tank. This leaves some room in the fuel tank for the fuel to expand with temperature changes.

If the fuel nozzle keeps clicking off even though the tank is not full, there may be a problem with your vehicle’s fuel vapor recovery system. The system helps keep fuel vapor from going into the atmosphere. Try filling at another pump. If this does not fix the problem, consult your dealer.

254

5.

Screw the fuel fill cap back on until it clicks at least once. If you do not properly tighten the cap, the malfunction indicator lamp may come on (see page will also see a ‘‘CHECK FUEL CAP’’ message on the information display.

). You

350

6.

Push the fuel fill door closed until it latches.

Opening and Closing the Hood

HOOD RELEASE HANDLE

1.

Park the vehicle, and set the parking brake. Pull the hood release handle under the lower left corner of the dashboard. The hood will pop up slightly.

10/06/24 16:55:16 31SVA650_260

Service Station Procedures

GRIP

Oil Check

DIPSTICK

LATCH

SUPPORT ROD

CLIP

DX, DX-G, LX, SE, EX, EX-L

2.

Put your fingers under the front edge of the hood near the center. Slide your hand to the left until you feel the hood latch handle. Push this handle up to release it. Lift up the hood.

If the hood latch handle moves stiffly, or if you can open the hood without lifting the handle, the mechanism should be cleaned and lubricated.

3.

Holding the grip, pull the support rod out of its clip. Insert the end into the hole in the hood designated by an arrow.

To close the hood, lift it up slightly to remove the support rod from the hole. Put the support rod back into its holding clip. Lower the hood to about a foot (30 cm) above the fender, then let it drop. Make sure it is securely latched.

Wait a few minutes after turning the engine off before you check the oil.

1.

Remove the dipstick (orange handle).

2.

Wipe off the dipstick with a clean cloth or paper towel.

3.

Insert the dipstick all the way back into its hole.

CONTINUED

255

10/06/24 16:55:23 31SVA650_261

Service Station Procedures

DIPSTICK

Si

DX, DX-G, LX, SE, EX, EX-L

Si

UPPER MARK LOWER MARK

UPPER MARK LOWER MARK

If it is near or below the lower mark, see 300

Adding Engine Oil

on page

4.

Remove the dipstick again, and check the level. It should be between the upper and lower marks.

256

10/06/24 16:55:29 31SVA650_262

Engine Coolant Check

MAX

RESERVE TANK

MAX

RESERVE TANK

Service Station Procedures

MIN

DX, DX-G, LX, SE, EX, EX-L Look at the coolant level in the radiator reserve tank. Make sure it is between the MAX and MIN lines. If Adding it is below the MIN line, see Engine Coolant for 304
information on adding the proper coolant.

on page

MIN

Si Refer to Checks for information about checking other items on your vehicle.

Owner’s Maintenance on page

296

257

10/06/24 16:55:38 31SVA650_263

Fuel Economy

Actual Mileage and EPA Fuel Economy Estimates Comparison. Fuel economy is not a fixed number. It varies based on driving conditions, driving habits, and vehicle condition. Therefore, it is not possible for one set of estimates to predict fuel economy precisely for all drivers in all environments.

The EPA fuel economy estimates shown in the example to the right are a useful tool for comparison when buying a vehicle. EPA estimates include:

−

City MPG Represents urban driving in light traffic. A range of miles per gallon achieved is also provided.