2014 GMC Sierra Owners Manual

Driving Information

Distracted Driving Distraction comes in many forms and can take your focus from the task of driving. Exercise good judgment and do not let other activities divert your attention away from the road. Many local governments have enacted laws regarding driver distraction. Become familiar with the local laws in your area. To avoid distracted driving, always keep your eyes on the road, hands on the wheel, and mind on the drive. . Do not use a phone in

demanding driving situations. Use a hands-free method to place or receive necessary phone calls.

. Watch the road. Do not read,

take notes, or look up information on phones or other electronic devices.

. Designate a front seat

passenger to handle potential distractions.

. Become familiar with vehicle

features before driving, such as programming favorite radio stations and adjusting climate control and seat settings. Program all trip information into any navigation device prior to driving.

. Wait until the vehicle is parked

to retrieve items that have fallen to the floor.

. Stop or park the vehicle to tend

to children.

. Keep pets in an appropriate

carrier or restraint.

. Avoid stressful conversations while driving, whether with a passenger or on a cell phone.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (3,1)

{ Warning

Taking your eyes off the road too long or too often could cause a crash resulting in injury or death. Focus your attention on driving.

Refer to the infotainment section for more information on using that system and the navigation system, if equipped, including pairing and using a cell phone.

Defensive Driving Defensive driving means “always expect the unexpected.” The first step in driving defensively is to wear the safety belt. See Safety Belts on page 3-12. . Assume that other road users

(pedestrians, bicyclists, and other drivers) are going to be careless and make mistakes. Anticipate what they might do and be ready.

. Allow enough following distance

between you and the driver in front of you. Focus on the task of driving.

Drunk Driving Death and injury associated with drinking and driving is a global tragedy.

{ Warning

Drinking and then driving is very dangerous. Your reflexes, perceptions, attentiveness, and judgment can be affected by even a small amount of alcohol. You can have a serious — or even fatal — collision if you drive after drinking. Do not drink and drive or ride with a driver who has been drinking. Ride home in a cab; or if you are with a group, designate a driver who will not drink.

Driving and Operating

9-3

Control of a Vehicle Braking, steering, and accelerating are important factors in helping to control a vehicle while driving.

Braking Braking action involves perception time and reaction time. Deciding to push the brake pedal is perception time. Actually doing it is reaction time. Average driver reaction time is about three-quarters of a second. In that time, a vehicle moving at 100 km/h (60 mph) travels 20 m (66 ft), which could be a lot of distance in an emergency. Helpful braking tips to keep in mind include: . Keep enough distance between

you and the vehicle in front of you.

. Avoid needless heavy braking. . Keep pace with traffic.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (4,1)

9-4

Driving and Operating

If the engine ever stops while the vehicle is being driven, brake normally but do not pump the brakes. Doing so could make the pedal harder to push down. If the engine stops, there will be some power brake assist but it will be used when the brake is applied. Once the power assist is used up, it can take longer to stop and the brake pedal will be harder to push.

Steering

Electric Power Steering (1500 Series) If the vehicle has electric power steering, it does not have power steering fluid. Regular maintenance is not required. If power steering assist is lost due to a system malfunction, the vehicle can be steered, but may require increased effort. See your dealer if there is a problem.

If the steering wheel is turned until it reaches the end of its travel, and is held in that position for an extended period of time, power steering assist may be reduced. If the steering assist is used for an extended period of time, power assist may be reduced. Normal use of the power steering assist should return when the system cools down. See specific vehicle steering messages under Steering System Messages on page 5-41. Hydraulic Power Steering (2500/3500 Series) If the vehicle has hydraulic power steering, it may require maintenance. See Power Steering Fluid (2500/3500 Series) on page 10-26 or Power Steering Fluid (1500 Series) on page 10-26.

If power steering assist is lost because the engine stops or a system malfunctions, the vehicle can be steered but may require increased effort. See your dealer if there is a problem.

{ Caution

If the steering wheel is turned until it reaches the end of its travel, and is held in that position for more than 15 seconds, damage may occur to the power steering system and there may be loss of power steering assist.

Curve Tips

Take curves at a reasonable speed.

. Reduce speed before entering a

curve.

. Maintain a reasonable steady

speed through the curve.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (5,1)

Off-Road Recovery

. Wait until the vehicle is out of the curve before accelerating gently into the straightaway.

Steering in Emergencies

There are some situations when steering around a problem may be more effective than braking.

. Holding both sides of the

steering wheel allows you to turn 180 degrees without removing a hand.

. Antilock Brake System (ABS) allows steering while braking.

The vehicle's right wheels can drop off the edge of a road onto the shoulder while driving. Follow these tips: 1. Ease off the accelerator and then, if there is nothing in the way, steer the vehicle so that it straddles the edge of the pavement.

2. Turn the steering wheel about one-eighth of a turn, until the right front tire contacts the pavement edge.

Driving and Operating

9-5

3. Turn the steering wheel to go

straight down the roadway.

Loss of Control

Skidding There are three types of skids that correspond to the vehicle's three control systems: . Braking Skid — wheels are not

rolling.

. Steering or Cornering Skid —

too much speed or steering in a curve causes tires to slip and lose cornering force.

. Acceleration Skid — too much

throttle causes the driving wheels to spin.

Defensive drivers avoid most skids by taking reasonable care suited to existing conditions, and by not overdriving those conditions. But skids are always possible.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (6,1)

9-6

Driving and Operating

If the vehicle starts to slide, follow these suggestions: . Ease your foot off the

accelerator pedal and steer the way you want the vehicle to go. The vehicle may straighten out. Be ready for a second skid if it occurs.

. Slow down and adjust your driving according to weather conditions. Stopping distance can be longer and vehicle control can be affected when traction is reduced by water, snow, ice, gravel, or other material on the road. Learn to recognize warning clues — such as enough water, ice, or packed snow on the road to make a mirrored surface — and slow down when you have any doubt. Try to avoid sudden steering, acceleration, or braking, including reducing vehicle speed by shifting to a lower gear. Any sudden changes could cause the tires to slide.

Remember: Antilock brakes help avoid only the braking skid.

Off-Road Driving Four-wheel-drive vehicles can be used for off-road driving. Vehicles without four-wheel drive and vehicles not equipped with All Terrain (AT) or On-Off Road (OOR) tires must not be driven off-road except on a level, solid surface. For more contact information about the original equipment tires, see the Limited Warranty and Owner Assistance Information manual. One of the best ways for successful off-road driving is to control the speed.

{ Warning

When driving off-road, bouncing and quick changes in direction can easily throw you out of position. This could cause you to

(Continued)

Warning (Continued)

lose control and crash. You and your passengers should always wear safety belts.

Before Driving Off-Road . Have all necessary maintenance

and service work completed. Fuel the vehicle, fill fluid levels, and check inflation pressure in all tires, including the spare, if equipped.

. Read all the information about

four-wheel-drive vehicles in this manual.

. Remove any underbody air

deflector, if equipped. Re-attach the air deflector after off-road driving.

. Know the local laws that apply to

off-road driving.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (7,1)

To gain more ground clearance if needed, it may be necessary to remove the front fascia lower air dam.

{ Caution Operating the vehicle for extended periods without the front fascia lower air dam installed can cause improper air flow to the engine. Re-attach the front fascia air dam after off-road driving.

Loading the Vehicle for Off-Road Driving

{ Warning

. Unsecured cargo on the load

floor can be tossed about when driving over rough terrain. You or your passengers can be struck by flying objects. Secure the cargo properly.

(Continued)

Warning (Continued)

. Keep cargo in the cargo area as far forward and as low as possible. The heaviest things should be on the floor, forward of the rear axle.

. Heavy loads on the roof raise the vehicle's center of gravity, making it more likely to roll over. You can be seriously or fatally injured if the vehicle rolls over. Put heavy loads inside the cargo area, not on the roof.

For more information about loading the vehicle, see If the Vehicle Is Stuck on page 9-14 and Tires on page 10-51. Environmental Concerns . Always use established trails,

roads, and areas that have been set aside for public off-road recreational driving and obey all posted regulations.

Driving and Operating

9-7

. Do not damage shrubs, flowers,

trees, or grasses or disturb wildlife.

. Do not park over things that

burn. See Parking over Things That Burn on page 9-32.

Driving on Hills Driving safely on hills requires good judgment and an understanding of what the vehicle can and cannot do.

{ Warning

Many hills are simply too steep for any vehicle. Driving up hills can cause the vehicle to stall. Driving down hills can cause loss of control. Driving across hills can cause a rollover. You could be injured or killed. Do not drive on steep hills.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (8,1)

9-8

Driving and Operating

Before driving on a hill, assess the steepness, traction, and obstructions. If the terrain ahead cannot be seen, get out of the vehicle and walk the hill before driving further. When driving on hills: . Use a low gear and keep a firm

grip on the steering wheel.

. Maintain a slow speed. . When possible, drive straight up

or down the hill.

. Slow down when approaching

the top of the hill.

. Use headlamps even during the

day to make the vehicle more visible.

Warning (Continued)

P (Park). This is because the N (Neutral) position on the transfer case overrides the transmission. You or someone else could be injured. If leaving the vehicle, set the parking brake and shift the transmission to P (Park). Shift the transfer case to any position but N (Neutral).

. When driving down a hill, keep

the vehicle headed straight down. Use a low gear because the engine will work with the brakes to slow the vehicle and help keep the vehicle under control.

{ Warning

Driving to the top of a hill at high speed can cause an accident. There could be a drop-off, embankment, cliff, or even another vehicle. You could be seriously injured or killed. As you near the top of a hill, slow down and stay alert.

. Never go downhill forward or

backward with either the transmission or transfer case in N (Neutral). The brakes could overheat and you could lose control.

{ Warning

If the vehicle has the two‐speed automatic transfer case, shifting the transfer case to N (Neutral) can cause your vehicle to roll even if the transmission is in

(Continued)

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (9,1)

{ Warning

Heavy braking when going down a hill can cause your brakes to overheat and fade. This could cause loss of control and you or others could be injured or killed. Apply the brakes lightly when descending a hill and use a low gear to keep vehicle speed under control.

If the vehicle stalls on a hill: 1. Apply the brakes to stop the vehicle, and then apply the parking brake.

2. Shift into P (Park) and then

restart the engine.

If driving uphill when the vehicle stalls, shift to R (Reverse), release the parking brake, and back straight down.

Never try to turn the vehicle around. If the hill is steep enough to stall the vehicle, it is steep enough to cause it to roll over. If you cannot make it up the hill, back straight down the hill. Never back down a hill in N (Neutral) using only the brake. The vehicle can roll backward quickly and you could lose control. If driving downhill when the vehicle stalls, shift to a lower gear, release the parking brake, and drive straight down the hill.

3.

If the vehicle cannot be restarted after stalling, set the parking brake, shift into P (Park), and turn the vehicle off. 3.1. Leave the vehicle and

seek help.

Driving and Operating

9-9

3.2. Stay clear of the path the

vehicle would take if it rolled downhill.

. Avoid turns that take the vehicle

across the incline of the hill. A hill that can be driven straight up or down might be too steep to drive across. Driving across an incline puts more weight on the downhill wheels, which could cause a downhill slide or a rollover.

. Surface conditions can be a

problem. Loose gravel, muddy spots, or even wet grass can cause the tires to slip sideways, downhill. If the vehicle slips sideways, it can hit something that will trip it — a rock, a rut, etc. — and roll over.

. Hidden obstacles can make the

steepness of the incline more severe. If a rock is driven across with the uphill wheels, or if the downhill wheels drop into a rut or depression, the vehicle can tilt even more.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (10,1)

9-10

Driving and Operating

If an incline must be driven across, and the vehicle starts to slide, turn downhill. This should help straighten out the vehicle and prevent the side slipping.

{ Warning

Getting out of the vehicle on the downhill side when stopped across an incline is dangerous. If the vehicle rolls over, you could be crushed or killed. Always get out on the uphill side of the vehicle and stay well clear of the rollover path.

Driving in Mud, Sand, Snow, or Ice Use a low gear when driving in mud — the deeper the mud, the lower the gear. Keep the vehicle moving to avoid getting stuck. Traction changes when driving on sand. On loose sand, such as on beaches or sand dunes, the tires tend to sink into the sand. This

affects steering, accelerating, and braking. Drive at a reduced speed and avoid sharp turns or abrupt maneuvers. Traction is reduced on hard packed snow and ice and it is easy to lose control. Reduce vehicle speed when driving on hard packed snow and ice.

{ Warning

Driving on frozen lakes, ponds, or rivers can be dangerous. Ice conditions vary greatly and the vehicle could fall through the ice; you and your passengers could drown. Drive your vehicle on safe surfaces only.

Driving in Water

{ Warning

Driving through rushing water can be dangerous. Deep water can sweep your vehicle downstream and you and your passengers could drown. If it is only shallow water, it can still wash away the ground from under your tires. Traction could be lost, and the vehicle could roll over. Do not drive through rushing water.

{ Caution

Do not drive through standing water if it is deep enough to cover the wheel hubs, axles, or exhaust pipe. Deep water can damage the axle and other vehicle parts.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (11,1)

If the standing water is not too deep, drive slowly through it. At faster speeds, water splashes and the vehicle can stall. When going through water, the brakes get wet and it may take longer to stop. See “Driving on Wet Roads” later in this section. After Off-Road Driving Remove any brush or debris that has collected on the underbody or chassis, or under the hood. These accumulations can be a fire hazard. After operation in mud or sand, have the brake linings cleaned and checked. These substances can cause glazing and uneven braking. Check the body structure, steering, suspension, wheels, tires, and exhaust system for damage and check the fuel lines and cooling system for any leakage. More frequent maintenance service is required. See the Maintenance Schedule on page 11-3.

Driving on Wet Roads Rain and wet roads can reduce vehicle traction and affect your ability to stop and accelerate. Always drive slower in these types of driving conditions and avoid driving through large puddles and deep‐standing or flowing water.

{ Warning

Wet brakes can cause crashes. They might not work as well in a quick stop and could cause pulling to one side. You could lose control of the vehicle. After driving through a large puddle of water or a car/vehicle wash, lightly apply the brake pedal until the brakes work normally. Flowing or rushing water creates strong forces. Driving through flowing water could cause the vehicle to be carried away. If this

(Continued)

Driving and Operating

9-11

Warning (Continued)

happens, you and other vehicle occupants could drown. Do not ignore police warnings and be very cautious about trying to drive through flowing water.

Hydroplaning Hydroplaning is dangerous. Water can build up under the vehicle's tires so they actually ride on the water. This can happen if the road is wet enough and you are going fast enough. When the vehicle is hydroplaning, it has little or no contact with the road. There is no hard and fast rule about hydroplaning. The best advice is to slow down when the road is wet.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (12,1)

9-12

Driving and Operating

Other Rainy Weather Tips Besides slowing down, other wet weather driving tips include: . Allow extra following distance. . Pass with caution. . Keep windshield wiping

equipment in good shape.

. Keep the windshield washer fluid

reservoir filled.

. Have good tires with proper

tread depth. See Tires on page 10-51. Turn off cruise control.

Highway Hypnosis Always be alert and pay attention to your surroundings while driving. If you become tired or sleepy, find a safe place to park the vehicle and rest. Other driving tips include: . Keep the vehicle well ventilated. . Keep the interior temperature cool.

. Keep your eyes moving — scan the road ahead and to the sides.

. Check the rearview mirror and

vehicle instruments often.

Hill and Mountain Roads Driving on steep hills or through mountains is different than driving on flat or rolling terrain. Tips for driving in these conditions include: . Keep the vehicle serviced and in

good shape.

. Check all fluid levels and brakes,

tires, cooling system, and transmission.

. Shift to a lower gear when going

down steep or long hills.

{ Warning

Using the brakes to slow the vehicle on a long downhill slope can cause brake overheating, can reduce brake performance, and

(Continued)

Warning (Continued)

could result in a loss of braking. Shift the transmission to a lower gear to let the engine assist the brakes on a steep downhill slope.

{ Warning

Coasting downhill in N (Neutral) or with the ignition off is dangerous. This can cause overheating of the brakes and loss of steering. Always have the engine running and the vehicle in gear.

. Stay in your own lane. Do not swing wide or cut across the center of the road. Drive at speeds that let you stay in your own lane.

. Be alert on top of hills;

something could be in your lane (stalled car, accident).

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (13,1)

Driving and Operating

9-13

Blizzard Conditions Being stuck in snow can be a serious situation. Stay with the vehicle unless there is help nearby. If possible, use Roadside Assistance. See Roadside Assistance Program on page 13-5. To get help and keep everyone in the vehicle safe:

Turn on the hazard warning flashers. Tie a red cloth to an outside mirror.

. Pay attention to special road

signs (falling rocks area, winding roads, long grades, passing or no-passing zones) and take appropriate action.

Winter Driving

Driving on Snow or Ice Drive carefully when there is snow or ice between the tires and the road, creating less traction or grip. Wet ice can occur at about 0°C (32°F) when freezing rain begins to fall, resulting in even less traction. Avoid driving on wet ice or in freezing rain until roads can be treated with salt or sand. Drive with caution, whatever the condition. Accelerate gently so traction is not lost. Accelerating too quickly causes the wheels to spin and makes the surface under the tires slick, so there is even less traction.

Try not to break the fragile traction. If you accelerate too fast, the drive wheels will spin and polish the surface under the tires even more. Traction Control should be turned on. See Traction Control/Electronic Stability Control on page 9-54. The Antilock Brake System (ABS) improves vehicle stability during hard stops on slippery roads, but apply the brakes sooner than when on dry pavement. See Antilock Brake System (ABS) on page 9-52. Allow greater following distance on any slippery road and watch for slippery spots. Icy patches can occur on otherwise clear roads in shaded areas. The surface of a curve or an overpass can remain icy when the surrounding roads are clear. Avoid sudden steering maneuvers and braking while on ice. Turn off cruise control on slippery surfaces.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (14,1)

9-14

Driving and Operating

{ Warning

Snow can trap engine exhaust under the vehicle. This may cause exhaust gases to get inside. Engine exhaust contains carbon monoxide (CO) which cannot be seen or smelled. It can cause unconsciousness and even death. If the vehicle is stuck in the snow: . Clear away snow from around

the base of your vehicle, especially any that is blocking the exhaust pipe.

. Check again from time to

time to be sure snow does not collect there.

. Open a window about 5 cm

(2 in) on the side of the vehicle that is away from the wind to bring in fresh air.

(Continued)

Warning (Continued)

. Fully open the air outlets on

or under the instrument panel.

. Adjust the climate control

system to a setting that circulates the air inside the vehicle and set the fan speed to the highest setting. See “Climate Control Systems”.

For more information about carbon monoxide, see Engine Exhaust on page 9-33.

To save fuel, run the engine for only short periods as needed to warm the vehicle and then shut the engine off and close the window most of the way to save heat. Repeat this until help arrives but only when you feel really uncomfortable from the cold. Moving about to keep warm also helps.

If it takes some time for help to arrive, now and then when you run the engine, push the accelerator pedal slightly so the engine runs faster than the idle speed. This keeps the battery charged to restart the vehicle and to signal for help with the headlamps. Do this as little as possible to save fuel.

If the Vehicle Is Stuck Slowly and cautiously spin the wheels to free the vehicle when stuck in sand, mud, ice, or snow. See “Rocking the Vehicle to Get It Out” later in this section. The Traction Control System (TCS) can often help to free a stuck vehicle. See Traction Control/ Electronic Stability Control on page 9-54. If TCS cannot free the vehicle, see “Rocking the Vehicle to Get it Out” following.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (15,1)

Driving and Operating

9-15

gears. Slowly spinning the wheels in the forward and reverse directions causes a rocking motion that could free the vehicle. If that does not get the vehicle out after a few tries, it might need to be towed out. See Towing the Vehicle on page 10-94. Recovery hooks can be used, if the vehicle has them. Recovery Hooks

{ Warning

Never pull on recovery hooks from the side. The hooks could break and you and others could be injured. When using recovery hooks, always pull the vehicle from the front.

{ Warning

If the vehicle's tires spin at high speed, they can explode, and you or others could be injured. The vehicle can overheat, causing an engine compartment fire or other damage. Spin the wheels as little as possible and avoid going above 56 km/h (35 mph).

For information about using tire chains on the vehicle, see Tire Chains on page 10-75. Rocking the Vehicle to Get It Out Turn the steering wheel left and right to clear the area around the front wheels. For four-wheel-drive vehicles, shift into Four-Wheel Drive High. Turn the TCS off. Shift back and forth between R (Reverse) and a forward gear, spinning the wheels as little as possible. To prevent transmission wear, wait until the wheels stop spinning before shifting

{ Caution

Do not drive through standing water if it is deep enough to cover the wheel hubs, axles, or exhaust pipe. Deep water can damage the axle and other vehicle parts.

There are recovery hooks at the front of the vehicle. Use them if the vehicle is stuck off-road and needs to be pulled some place to continue driving.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (16,1)

9-16

Driving and Operating

Vehicle Load Limits It is very important to know how much weight the vehicle can carry. This weight is called the vehicle capacity weight and includes the weight of all occupants, cargo, and all nonfactory-installed options. Two labels on the vehicle show how much weight it was designed to carry: the Tire and Loading Information label and the Certification/Tire label.

{ Warning

Do not load the vehicle any heavier than the Gross Vehicle Weight Rating (GVWR), or either the maximum front or rear Gross Axle Weight Rating (GAWR). This can cause systems to break and change the way the (Continued)

Warning (Continued)

vehicle handles. This could cause loss of control and a crash. Overloading can also shorten the life of the vehicle.

Tire and Loading Information Label

Label Example

A vehicle-specific Tire and Loading Information label is attached to the center pillar (B-pillar). With the driver door

open, you will find the label attached below the door lock post (striker). The Tire and Loading Information label shows the number of occupant seating positions (1), and the maximum vehicle capacity weight (2) in kilograms and pounds. The Tire and Loading Information label also shows the size of the original equipment tires (3) and the recommended cold tire inflation pressures (4). For more information on tires and inflation see Tires on page 10-51 and Tire Pressure on page 10-61. There is also important loading information on the vehicle Certification/Tire label. It tells you the Gross Vehicle Weight Rating (GVWR) and the Gross Axle Weight Rating (GAWR) for

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (17,1)

Driving and Operating

9-17

the front and rear axles. See “Certification/Tire Label” later in this section.

“Steps for Determining Correct Load Limit– 1. Locate the statement "The

combined weight of occupants and cargo should never exceed XXX kg or XXX lbs." on your vehicle’s placard.

2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.

3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lbs.

4. The resulting figure equals

the available amount of cargo and luggage load capacity. For example, if the "XXX" amount equals 1400 lbs. and

there will be five 150 lb passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lbs. (1400-750 (5 x 150) = 650 lbs.)

5. Determine the combined

6.

weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.”

See Trailer Towing on page 9-77
for important information on towing a trailer, towing safety rules, and trailering tips.

Example 1

1. Vehicle Capacity Weight for

Example 1 = (453 kg) (1,000 lb)

2. Subtract Occupant Weight @

68 kg (150 lb) × 2 = 136 kg (300 lb)

3. Available Occupant and Cargo

Weight = 317 kg (700 lb)

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (18,1)

9-18

Driving and Operating

of the driver, passengers, and cargo should never exceed the vehicle's capacity weight.

Certification/Tire Label

Example 2

Example 3

1. Vehicle Capacity Weight for

Example 2 = 453 kg (1,000 lb) 2. Subtract Occupant Weight @

68 kg (150 lb) × 5 = 340 kg (750 lb)

1. Vehicle Capacity Weight for

Example 3 = 453 kg (1,000 lb) 2. Subtract Occupant Weight @

91 kg (200 lb) × 5 = 453 kg (1,000 lb)

3. Available Cargo Weight = 113 kg

3. Available Cargo Weight =

(250 lb)

0 kg (0 lb)

Refer to the Tire and Loading Information label for specific information about the vehicle's capacity weight and seating positions. The combined weight

A vehicle-specific Certification/ Tire label is label is attached to the center pillar (B-pillar). The label shows the size of the vehicle's original tires and the inflation pressures needed to obtain the gross weight capacity of the vehicle. This is called Gross Vehicle Weight

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (19,1)

Driving and Operating

9-19

Rating (GVWR). The GVWR includes the weight of the vehicle, all occupants, fuel, and cargo. The Certification/Tire label also tells you the maximum weights for the front and rear axles, called Gross Axle Weight Rating (GAWR). To find out the actual loads on the front and rear axles, you need to go to a weigh station and weigh the vehicle. Your dealer can help you with this. Be sure to spread out the load equally on both sides of the centerline. Never exceed the GVWR for the vehicle, or the GAWR for either the front or rear axle. The Certification/Tire label also contains important information about the Front Axle Reserve Capacity. See Adding a Snow Plow or Similar Equipment on page 9-99.

{ Warning

In the case of a sudden stop or collision, things carried in the bed of your truck could shift forward and come into the passenger area, injuring you and others. If you put things in the bed of your truck, you should make sure they are properly secured.

{ Warning

Do not load the vehicle any heavier than the Gross Vehicle Weight Rating (GVWR), or either the maximum front or rear Gross Axle Weight Rating (GAWR). This can cause systems to break and change the way the vehicle handles. This could

(Continued)

Warning (Continued)

cause loss of control and a crash. Overloading can also shorten the life of the vehicle.

{ Caution

Overloading the vehicle may cause damage. Repairs would not be covered by the vehicle warranty. Do not overload the vehicle.

Using heavier suspension components to get added durability might not change the weight ratings. Ask your dealer to help load the vehicle the right way. If you put things inside the vehicle — like suitcases, tools, packages, or anything else — they go as fast as the

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (20,1)

9-20

Driving and Operating

vehicle goes. If you have to stop or turn quickly, or if there is a crash, they will keep going.

{ Warning

Things you put inside the vehicle can strike and injure people in a sudden stop or turn, or in a crash.

. Put things in the cargo

area of the vehicle. Try to spread the weight evenly.

. Never stack heavier

things, like suitcases, inside the vehicle so that some of them are above the tops of the seats.

. Do not leave an

unsecured child restraint in the vehicle.

(Continued)

Warning (Continued)

. When you carry something

inside the vehicle, secure it whenever you can.

. Do not leave a seat folded down unless you need to.

There is also important loading information for off-road driving in this manual. See “Loading the Vehicle for Off-Road Driving“ under Off-Road Driving on page 9-6.

Two-Tiered Loading Depending on the model of the pickup, an upper load platform can be created by positioning three or four 5 cm (2 in) by 15 cm (6 in) wooden planks across the width of the pickup box. The planks must be inserted in the pickup box depressions.

When using this upper load platform, be sure the load is securely tied down to prevent it from shifting. The load's center of gravity should be positioned in a zone over the rear axle. The zone is located in the area between the front of each wheel well and the rear of each wheel well. The center of gravity height must not extend above the top of the pickup box flareboard. Any load that extends beyond the vehicle's taillamp area must be properly marked according to local laws and regulations. Remember not to exceed the Gross Axle Weight Rating (GAWR) of the front or rear axle.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (21,1)

Add-On Equipment When carrying removable items, a limit on how many people carried inside the vehicle may be necessary. Be sure to weigh the vehicle before buying and installing the new equipment.

{ Caution

Overloading the vehicle may cause damage. Repairs would not be covered by the vehicle warranty. Do not overload the vehicle.

Remember not to exceed the Gross Axle Weight Rating (GAWR) of the front or rear axle.

* Equipment Ladder Rack and Cargo Cross Toolbox and Cargo Side Boxes and Cargo

Maximum Weight 340 kg (750 lb)

181 kg (400 lb)

113 kg per side (250 lb per side)

* The combined weight for all rail-mounted equipment should not exceed 454 kg (1,000 lb).

Driving and Operating

9-21

Loading Points

1. Primary Load Points 2. Secondary Load Areas 3. GM Approved Accessory

Mounting Points

Structural members (1) and (2) are included in the pickup box design. Additional accessories should use these load points. Depending on the accessory design, use a spacer under the accessory at the load points to remove gap. The holes for GM approved accessories (3) are not intended for aftermarket

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (22,1)

9-22

Driving and Operating

equipment. See www.gmupfitter.com for additional pickup box load bearing structural information.

Truck-Camper Loading Information A vehicle-specific Truck-Camper Loading Information label is attached to the inside of the vehicle's glove box. This label indicates if a slide-in camper can be carried, how much of a load the vehicle can carry, and how to correctly spread out the load. It will help to match the right slide-in camper to the vehicle. Your dealer can help make a good vehicle-camper match and help determine the Cargo Weight Rating (CWR). When installing and loading a slide-in camper, check the manufacturer's instructions.

When carrying a slide-in camper, the total cargo load of the vehicle is the weight of the camper plus: . Everything added to the

camper after it left the factory.

. Everything in the camper. . All the people inside. The CWR is the maximum weight of the load the vehicle can carry. It does not include the weight of the people inside. But, use about 68 kg (150 lb) for each seat. The total cargo load must not be more than the vehicle's CWR. Refer to the Truck-Camper Loading Information label in the glove box for dimensions 1 and 2 as shown in the following illustration.

Use the rear edge of the load floor for measurement purposes. The recommended location for the cargo center of gravity is at point 3 for the CWR. It is the point where the mass of a body is concentrated and, if suspended at that point, would balance the front and rear.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (23,1)

Here is an example of proper truck and camper match:

1. Camper Center of Gravity 2. Recommended Center of

Gravity Location Zone

When the truck is used to carry a slide-in camper, the total cargo load of the truck consists of the manufacturer's camper weight figure, the weight of installed additional camper equipment not included in the manufacturer's camper weight figure, the weight

Driving and Operating

9-23

of camper cargo, and the weight of passengers in the camper. The total cargo load should not exceed the truck's cargo weight rating, and the camper's center of gravity (1) should fall within the truck's recommended center of gravity zone (2) when installed. Any accessories or other equipment that are added to the vehicle must be weighed. Then, subtract this extra weight from the CWR. This extra weight may shorten the center of gravity zone of the vehicle. If the slide-in camper and its load weighs less than the CWR, the center of gravity zone for the vehicle may be larger. Secure loose items to prevent weight shifts that could affect the balance of the vehicle. When the truck-camper is loaded, drive to a scale and weigh on the front

and on the rear wheels separately to determine axle loads. Individual axle loads should not exceed either of the gross axle weight ratings (GAWR). The total axle loads should not exceed the vehicle's gross vehicle weight rating (GVWR). These ratings are given on the Certification/Tire label attached to the B-pillar. See “Certification/Tire Label” under Vehicle Load Limits on page 9-16. If weight ratings are exceeded, move or remove items to bring all weights below the ratings. See your dealer for more information on curb weights, cargo weights, Cargo Weight Rating, and the correct center of gravity zone.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (24,1)

9-24

Driving and Operating

Starting and Operating

New Vehicle Break-In

{ Caution

The vehicle does not need an elaborate break-in. But it will perform better in the long run if you follow these guidelines:

. Keep the vehicle speed at

88 km/h (55 mph) or less for the first 805 km (500 mi). . Do not drive at any one

constant speed, fast or slow, for the first 805 km (500 mi). Do not make full-throttle starts. Avoid downshifting to brake or slow the vehicle.

. Avoid making hard stops for

the first 322 km (200 mi) or so. During this time the new brake linings are not yet

(Continued)

Adjustable Throttle and Brake Pedal If equipped, the position of the throttle and brake pedals can be changed. No adjustment to the pedals can be made when the vehicle is in R (Reverse) or while using cruise control.

Caution (Continued)

broken in. Hard stops with new linings can mean premature wear and earlier replacement. Follow this breaking-in guideline every time you get new brake linings.

. Do not tow a trailer during

break-in. See Trailer Towing on page 9-77 for the trailer towing capabilities of the vehicle and more information. Following break-in, engine speed and load can be gradually increased.

The switch used to adjust the pedals is on the center stack, below the climate controls.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (25,1)

Driving and Operating

9-25

Ignition Positions

Lift the switch up to move the pedals closer to your body. Press the switch down to move the pedals away. Before you start driving, fully press the brake pedal to confirm the adjustment is right for you. While driving, make only small adjustments. The vehicle may have a memory function, which lets pedal settings be saved and recalled. See Memory Seats on page 3-6.

The ignition switch has four different positions. To shift out of P (Park), the ignition must be in ON/RUN or ACC/ ACCESSORY and the regular brake pedal must be applied. 1 (STOPPING THE ENGINE/LOCK/ OFF): When the vehicle is stopped, turn the ignition switch to LOCK/ OFF to turn the engine off. Retained Accessory Power (RAP) will remain active. See Retained Accessory Power (RAP) on page 9-29.

This position locks the ignition and steering wheel. It also locks the transmission on automatic transmission vehicles. The key can be removed in LOCK/OFF. The steering can bind with the wheels turned off center. If this happens, move the steering wheel from right to left while turning the key to ACC/ACCESSORY. If this does not work, then the vehicle needs service. Do not turn the engine off when the vehicle is moving. This will cause a loss of power assist in the brake and steering systems and disable the airbags. If the vehicle must be shut off in an emergency: 1. Brake using a firm and steady

pressure. Do not pump the brakes repeatedly. This may deplete power assist, requiring increased brake pedal force.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (26,1)

9-26

Driving and Operating

2. Shift the vehicle to N (Neutral).

This can be done while the vehicle is moving. After shifting to N (Neutral), firmly apply the brakes and steer the vehicle to a safe location.

3. Come to a complete stop, shift to P (Park), and turn the ignition to LOCK/OFF. On vehicles with an automatic transmission, the shift lever must be in P (Park) to turn the ignition switch to the LOCK/OFF position.

4. Set the parking brake. See

Parking Brake on page 9-53.

{ Warning

Turning off the vehicle while moving may cause loss of power assist in the brake and steering systems and disable the airbags. While driving, only shut the vehicle off in an emergency.

If the vehicle cannot be pulled over, and must be shut off while driving, turn the ignition to ACC/ ACCESSORY.

{ Caution

Using a tool to force the key to turn in the ignition could cause damage to the switch or break the key. Use the correct key, make sure it is all the way in, and turn it only with your hand. If the key cannot be turned by hand, see your dealer.

2 (ACC/ACCESSORY): This position lets things like the radio and the windshield wipers operate while the engine is off. It also unlocks the steering wheel. Use this position if the vehicle must be pushed or towed. 3 (ON/RUN): This position can be used to operate the electrical accessories and to display some instrument cluster warning and

indicator lights. This position can also be used for service and diagnostics, and to verify the proper operation of the malfunction indicator lamp as may be required for emission inspection purposes. The switch stays in this position when the engine is running. The transmission is also unlocked in this position on automatic transmission vehicles. If the key is left in the ACC/ ACCESSORY or ON/RUN position with the engine off, the battery could be drained. The vehicle may not start if the battery is allowed to drain for an extended period of time. 4 (START): This is the position that starts the engine. When the engine starts, release the key. The ignition switch returns to ON/RUN for driving. A warning tone will sound when the driver door is opened and the ignition is in ACC/ACCESSORY or LOCK/OFF, and the key is in the ignition.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (27,1)

Starting the Engine If the vehicle has a diesel engine, see the Duramax diesel supplement.

{ Caution

Do not try to shift to P (Park) if the vehicle is moving. If you do, you could damage the transmission. Shift to P (Park) only when the vehicle is stopped.

Move the shift lever to P (Park) or N (Neutral). The engine will not start in any other position. To restart the engine when the vehicle is already moving, use N (Neutral) only.

{ Caution

If you add electrical parts or accessories, you could change the way the engine operates. Any resulting damage would not be covered by the vehicle warranty. See Add-On Electrical Equipment on page 9-99.

Starting Procedure 1. With your foot off the accelerator

pedal, turn the ignition key to START. When the engine starts, let go of the key. The idle speed will go down as the engine gets warm. Do not race the engine immediately after starting it. Operate the engine and transmission gently to allow the oil to warm up and lubricate all moving parts.

Driving and Operating

9-27

The vehicle has a Computer-Controlled Cranking System. This feature assists in starting the engine and protects components. If the ignition key is turned to the START position, and then released when the engine begins cranking, the engine will continue cranking for a few seconds or until the vehicle starts. If the engine does not start and the key is held in START for many seconds, cranking will be stopped after 15 seconds to prevent cranking motor damage. To prevent gear damage, this system also prevents cranking if the engine is already running. Engine cranking can be stopped by turning the ignition switch to the ACC/ACCESSORY or LOCK/ OFF position. When the low fuel warning light is on and the FUEL LEVEL LOW message is displayed in the Driver Information Center (DIC), the Computer-Controlled

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (28,1)

9-28

Driving and Operating

Cranking System is disabled to prevent possible vehicle component damage. When this happens, hold the ignition switch in the START position to continue engine cranking.

{ Caution

Cranking the engine for long periods of time, by returning the ignition to the START position immediately after cranking has ended, can overheat and damage the cranking motor, and drain the battery. Wait at least 15 seconds between each try, to let the cranking motor cool down.

2.

If the engine does not start after five to 10 seconds, especially in very cold weather (below −18°C or 0°F), it could be flooded with too much gasoline. Try pushing the accelerator pedal all the way to the floor and holding it there while holding the key in START for up to

15 seconds. Wait at least 15 seconds between each try, to allow the cranking motor to cool down. When the engine starts, let go of the key and accelerator. If the vehicle starts briefly but then stops again, do the same thing. This clears the extra gasoline from the engine. Do not race the engine immediately after starting it. Operate the engine and transmission gently until the oil warms up and lubricates all moving parts.

Fast Idle System If equipped, this feature is available only with cruise control. The manual fast idle switch is operated using the cruise control buttons on the left side of the steering wheel. This system can be used to increase engine idle speed whenever the following conditions are met:

The parking brake is set. The brake pedal is not pressed.

The vehicle must not be moving and the accelerator must not be pressed.

To control the fast idle:

To enable the Fast Idle System, press and release the cruise control on/off button and ensure that the switch indicator light is lit.

. Press and release the cruise control SET- button. Engine speed will be held at approximately 1200 rpm.

One of the following actions will turn off the fast idle: . Pressing the brake. . Selecting the cruise control

cancel button.

. Releasing the parking brake. . Moving the transmission shift

lever out of P (Park) or N (Neutral).

. Selecting the cruise control on/

off button when it was previously on.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (29,1)

Driving and Operating

9-29

. Pressing the cruise control SET-

button a second time.

. Pressing the accelerator more

than one-quarter of the way down. Turning the ignition switch to the LOCK/OFF position.

Retained Accessory Power (RAP) The following vehicle accessories can be used for up to 10 minutes after the engine is turned off: . Audio System . Power Windows . OnStar System (if equipped) . Sunroof (if equipped) These features work when the key is in ON/RUN or ACC/ ACCESSORY. Once the key is turned from ON/RUN to LOCK/OFF, the windows and sunroof continue to work up to 10 minutes or until any

door is opened. The radio continues to work for up to 10 minutes or until the driver door is opened.

Accessory Power Outlets (APOs) The vehicle may have APOs in several locations. See Power Outlets on page 5-6. The APOs in the console or center seat position are powered by RAP. They will continue to work for up to 10 minutes after the key is turned from ON/RUN to LOCK/OFF, or until the driver door is opened. The APOs on the center stack come from the factory powered directly from the vehicle battery, and supply accessory power at all times, regardless of ignition key position. If electronic items are left plugged into these APOs for long periods of time with the vehicle off, the vehicle battery could be drained. The vehicle may not start if the battery is allowed to drain for an extended period of time.

Engine Coolant Heater The engine heater can provide easier starting and better fuel economy during engine warm-up in cold weather conditions at or below −18°C (0°F). Vehicles with an engine heater should be plugged in at least four hours before starting. An internal thermostat in the plug-end of the cord may exist, which will prevent engine coolant heater operation at temperatures above −18°C (0°F). If the vehicle has a diesel engine, see the Duramax diesel supplement.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (30,1)

9-30

Driving and Operating

To Use the Engine Coolant Heater 1. Turn off the engine. 2. Open the hood and unwrap the

electrical cord. The cord is secured to the driver side fender with a clip, next to the engine compartment fuse block. Carefully remove the wire tie that bundles the electrical plug. Do not cut the electrical cord.

3. Plug the cord into a normal, grounded 110-volt AC outlet.

{ Warning Plugging the cord into an ungrounded outlet could cause an electrical shock. Also, the wrong kind of extension cord could overheat and cause a fire. You could be seriously injured. Plug the cord into a properly grounded three-prong 110-volt AC outlet.

(Continued)

Warning (Continued)

If the cord will not reach, use a heavy-duty three-prong extension cord rated for at least 15 amps.

4. Before starting the engine, be

sure to unplug and store the cord as it was before to keep it away from moving engine parts. If you do not, it could be damaged.

The length of time the heater should remain plugged in depends on several factors. Ask a dealer in the area where you will be parking the vehicle for the best advice on this.

Shifting Into Park { Warning

It can be dangerous to get out of the vehicle if the shift lever is not fully in P (Park) with the parking brake firmly set. The vehicle can roll. If you have left the engine running, the vehicle can move suddenly. You or others could be injured. To be sure the vehicle will not move, even when you are on fairly level ground, use the steps that follow. With four-wheel drive, if the transfer case is in N (Neutral), the vehicle will be free to roll, even if the shift lever is in P (Park). Be sure the transfer case is in a drive gear. If towing a trailer, see Driving Characteristics and Towing Tips on page 9-74.

GMC Sierra Owner Manual 5853626) - 2014 - 3rd crc - 8/15/13

(GMNA-Localizing-U.S./Canada/Mexico-

Black plate (31,1)

1. Hold the brake pedal down, then

set the parking brake. See Parking Brake on page 9-53.

2. Move the shift lever into the

P (Park) position by pulling the shift lever toward you and moving it up as far as it will go.

3. Be sure the transfer case (if equipped) is in a drive gear — not in N (Neutral).

4. Turn the ignition key to