Download PDF Manual

4 354 kg (9,600 lbs) 5 897 kg (13,000 lbs) 6 396 kg (14,100 lbs)


7 257 kg (16,000 lbs) 9 299 kg (20,500 lbs) 9 299 kg (20,500 lbs)


4 309 kg (9,500 lbs) 5 897 kg (13,000 lbs) 6 350 kg (14,000 lbs)


7 257 kg (16,000 lbs) 9 299 kg (20,500 lbs) 9 299 kg (20,500 lbs)


2500 Series 4WD Crew Cab Standard Box HD


6.0L V8
6.0L V8 — Conventional Trailer 6.0L V8 — Fifth-Wheel Trailer


3.73
4.10
4.10


4 264 kg (9,400 lbs) 5 897 kg (13,000 lbs) 6 305 kg (13,900 lbs)


7 257 kg (16,000 lbs) 9 299 kg (20,500 lbs) 9 299 kg (20,500 lbs)


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (88,1)


9-88


Driving and Operating


Vehicle


Axle Ratio


Maximum Trailer Weight


GCWR (a)


2500 Series 4WD Regular Cab Long Box HD


6.0L V8
6.0L V8 — Conventional Trailer 6.0L V8 — Fifth-Wheel Trailer


2500 Series 4WD Extended Cab Long Box HD


6.0L V8
6.0L V8 — Conventional Trailer 6.0L V8 — Fifth-Wheel Trailer


2500 Series 4WD Crew Cab Long Box HD


6.0L V8
6.0L V8 — Conventional Trailer 6.0L V8 — Fifth-Wheel Trailer


3500 Series 2WD Regular Cab Long Box


6.0L V8 (Single Rear Wheels) Conventional Trailer 6.0L V8 (Single Rear Wheels) Fifth-Wheel Trailer


3.73
4.10
4.10


3.73
4.10
4.10


3.73
4.10
4.10


4.10


4.10


4 491 kg (9,900 lbs) 5 897 kg (13,000 lbs) 6 532 kg (14,400 lbs)


7 257 kg (16,000 lbs) 9 299 kg (20,500 lbs) 9 299 kg (20,500 lbs)


4 264 kg (9,400 lbs) 5 897 kg (13,000 lbs) 6 305 kg (13,900 lbs)


7 257 kg (16,000 lbs) 9 299 kg (20,500 lbs) 9 299 kg (20,500 lbs)


4 218 kg (9,300 lbs) 5 897 kg (13,000 lbs) 6 260 kg (13,800 lbs)


7 257 kg (16,000 lbs) 9 299 kg (20,500 lbs) 9 299 kg (20,500 lbs)


5 897 kg (13,000 lbs)


9 299 kg (20,500 lbs)


6 577 kg (14,500 lbs)


9 299 kg (20,500 lbs)


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (89,1)


Driving and Operating


9-89


Vehicle


Axle Ratio


Maximum Trailer Weight


GCWR (a)


6.0L V8 (Dual Rear Wheels) 6.0L V8 (Dual Rear Wheels)


3500 Series 2WD Extended Cab Long Box


6.0L V8 (Single Rear Wheels) 6.0L V8 (Single Rear Wheels) Conventional Trailer 6.0L V8 (Single Rear Wheels) Fifth-Wheel Trailer 6.0L V8 (Dual Rear Wheels) 6.0L V8 (Dual Rear Wheels)


3500 Series 2WD Crew Cab Standard Box


6.0L V8
6.0L V8 — Conventional Trailer 6.0L V8 Fifth-Wheel Trailer


3500 Series 2WD Crew Cab Long Box


6.0L V8 (Single Rear Wheels) 6.0L V8 (Single Rear Wheels) Conventional Trailer


3.73
4.10


3.73


4.10


4.10


3.73
4.10


3.73
4.10
4.10


3.73


4.10


4 354 kg (9,600 lbs) 6 396 kg (14,100 lbs)


7 257 kg (16,000 lbs) 9 299 kg (20,500 lbs)


4 309 kg (9,500 lbs)


7 257 kg (16,000 lbs)


5 897 kg (13,000 lbs)


9 299 kg (20,500 lbs)


6 350 kg (14,000 lbs)


9 299 kg (20,500 lbs)


4 128kg (9,100 lbs) 6 169 kg (13,600 lbs)


7 257 kg (16,000 lbs) 9 299 kg (20,500 lbs)


4 309kg (9,500 lbs) 5 897 kg (13,000 lbs) 6 350 kg (14,000 lbs)


7 257 kg (16,000 lbs) 9 299 kg (20,500 lbs) 9 299 kg (20,500 lbs)


4 264 kg (9,400 lbs)


7 257 kg (16,000 lbs)


5 897 kg (13,000 lbs)


9 299 kg (20,500 lbs)


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (90,1)


9-90


Driving and Operating


Vehicle


Axle Ratio


Maximum Trailer Weight


GCWR (a)


6.0L V8 (Single Rear Wheels) Fifth-Wheel Trailer 6.0L V8 (Dual Rear Wheels) 6.0L V8 (Dual Rear Wheels)


3500 Series 4WD Regular Cab Long Box


6.0L V8 (Single Rear Wheels) 6.0L V8 (Single Rear Wheels) Conventional Trailer 6.0L V8 (Single Rear Wheels) Fifth-Wheel Trailer 6.0L V8 (Dual Rear Wheels) 6.0L V8 (Dual Rear Wheels)


3500 Series 4WD Extended Cab Long Box


6.0L V8 (Single Rear Wheels) 6.0L V8 (Single Rear Wheels) Conventional Trailer


4.10


3.73
4.10


3.73


4.10


4.10


3.73
4.10


3.73


4.10


6 305 kg (13,900 lbs)


9 299 kg (20,500 lbs)


4 082 kg (9,000 lbs) 6 123 kg (13,500 lbs)


7 257 kg (16,000 lbs) 9 299 kg (20,500 lbs)


4 400 kg (9,700 lbs)


7 257 kg (16,000 lbs)


5 897 kg (13,000 lbs)


9 299 kg (20,500 lbs)


6 441 kg (14,200 lbs)


9 299 kg (20,500 lbs)


4 218 kg (9,300 lbs) 6 260 kg (13,800 lbs)


7 257 kg (16,000 lbs) 9 299 kg (20,500 lbs)


4 173 kg (9,200 lbs)


7 257 kg (16,000 lbs)


5 897 kg (13,000 lbs)


9 299 kg (20,500 lbs)


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (91,1)


Vehicle


Axle Ratio


Maximum Trailer Weight


GCWR (a)


Driving and Operating


9-91


6.0L V8 (Single Rear Wheels) Fifth-Wheel Trailer 6.0L V8 (Dual Rear Wheels) 6.0L V8 (Dual Rear Wheels)


3500 Series 4WD Crew Cab Standard Box


6.0L V8
6.0L V8 — Conventional Trailer 6.0L V8 — Fifth-Wheel Trailer


3500 Series 4WD Crew Cab Long Box


6.0L V8 (Single Rear Wheels) 6.0L V8 (Single Rear Wheels) Conventional Trailer 6.0L V8 (Single Rear Wheels) Fifth-Wheel Trailer 6.0L V8 (Dual Rear Wheels) 6.0L V8 (Dual Rear Wheels)


4.10


3.73
4.10


3.73
4.10
4.10


3.73


4.10


4.10


6 214 kg (13,700 lbs)


9 299 kg (20,500 lbs)


4 037 kg (8,900 lbs) 6 078 kg (13,400 lbs)


7 257 kg (16,000 lbs) 9 299 kg (20,500 lbs)


4 173 kg (9,200 lbs) 5 897 kg (13,000 lbs) 6 214 kg (13,700 lbs)


7 257 kg (16,000 lbs) 9 299 kg (20,500 lbs) 9 299 kg (20,500 lbs)


4 128 kg (9,100 lbs)


7 257 kg (16,000 lbs)


5 897 kg (13,000 lbs)


9 299 kg (20,500 lbs)


6 169 kg (13,600 lbs)


9 299 kg (20,500 lbs)


7 257 kg (16,000 lbs) 9 299 kg (20,500 lbs) (a) The Gross Combination Weight Rating (GCWR) is the total allowable weight of the completely loaded vehicle and trailer including any passengers, cargo, equipment, and conversions. The GCWR for the vehicle should not be exceeded. (b) This model is neither designed nor intended to tow fifth-wheel or gooseneck trailers.


3 946 kg (8,700 lbs) 5 987 kg (13,200 lbs)


3.73
4.10


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (92,1)


9-92


Driving and Operating


Ask your dealer for trailering information or advice, or write us at our Customer Assistance Offices. See Customer Assistance Offices (U.S. and Canada) on page 13‑4 or Customer Assistance Offices (Mexico) on page 13‑5 for more information.


Weight of the Trailer Tongue The tongue load (A) of any trailer is very important because it is also part of the vehicle weight. The Gross Vehicle Weight (GVW) includes the curb weight of the vehicle, any cargo carried in it, and the people who will be riding in the vehicle as well as trailer tongue weight. Vehicle options, equipment, passengers and cargo in the vehicle reduce the amount of tongue weight the vehicle can carry, which will also reduce the trailer weight the vehicle can tow. See “ Vehicle Load Limits” for more information about the vehicle's maximum load capacity.


Trailer tongue weight (A) should be 10 to 15 percent and fifth-wheel or gooseneck kingpin weight should be 15 to 25 percent of the loaded trailer weight up to the maximums for vehicle series and hitch type.:


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (93,1)


Vehicle Series


Hitch Type


Maximum Tongue


Weight


Weight Carrying


Weight Distributing


Fifth-Wheel Gooseneck


272 kg (600 lbs) 499 kg (1,100 lbs) 680 kg (1,500 lbs)


Weight Carrying or Weight Distributing Weight Carrying or Weight Distributing


1500
1500
1500
2500/3500
Standard Box 2500/ 3500 Long Box 2500
3500 Single Rear Wheels 3500 Dual Rear Wheels *816 kg (41,800 lbs) for vehicles built before October, 2011. Check the hitch rating label for correct maximum for the vehicle.


Fifth-Wheel Gooseneck


Fifth-Wheel Gooseneck


Fifth-Wheel Gooseneck


680 kg (1,500 lbs)


907 (2,000 lbs)


1 361 kg (3,000 lbs)


1 814 kg (4,000 lbs)


2 495 kg (5,500 lbs)


Do not exceed the maximum allowable tongue weight for the vehicle. Choose the shortest hitch extension that will position the hitch


ball closest to the vehicle. This will help reduce the effect of trailer tongue weight on the rear axle.


Driving and Operating


9-93


Trailering may be limited by the vehicle's ability to carry tongue weight. Tongue or kingpin weight cannot cause the vehicle to exceed the GVWR (Gross Vehicle Weight Rating) or the RGAWR (Rear Gross Axle Weight Rating). See “Total Weight on the Vehicle's Tires” later in this section for more information. After loading the trailer, weigh the trailer and then the tongue, separately, to see if the weights are proper. If they are not, adjustments might be made by moving some items around in the trailer. Total Weight on the Vehicle's Tires Be sure the vehicle's tires are inflated to the inflation pressures found on the Certification Tire label on the drivers door or see Vehicle Load Limits on page 9‑16 for more information.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (94,1)


9-94


Driving and Operating


Make sure not to exceed the GVWR limit for the vehicle, or the RGAWR, with the tow vehicle and trailer fully loaded for the trip including the weight of the trailer tongue. If using a weight-distributing hitch, make sure not to exceed the RGAWR before applying the weight distribution spring bars. Weight of the Trailering Combination It is important that the combination of the tow vehicle and trailer does not exceed any of its weight ratings — GCWR, GVWR, RGAWR, Trailer Weight Rating, or Tongue Weight. The only way to be sure it is not exceeding any of these ratings is to weigh the tow vehicle and trailer combination, fully loaded for the trip, getting individual weights for each of these items.


Towing Equipment


Hitches The correct hitch equipment helps maintain combination control. Many trailers can be towed with a weight-carrying hitch which simply features a coupler latched to the hitch ball, or a tow eye latched to a pintle hook. Other trailers may require a weight-distributing hitch that uses spring bars to distribute the trailer tongue weight among the two vehicle and trailer axles. Fifth-wheel and gooseneck hitches may also be used. See “Weight of the Trailer Tongue” under Trailer Towing on page 9‑78 for rating limits with various hitch types. If a step-bumper hitch will be used, the bumper could be damaged in sharp turns. Make sure there is ample room when turning to avoid contact between the trailer and the bumper.


Consider using sway controls with any trailer. Ask a trailering professional about sway controls or refer to the trailer manufacturer's recommendations and instructions. Weight-Distributing Hitch Adjustment


A. Body to Ground Distance B. Front of Vehicle When using a weight-distributing hitch, the spring bars should be adjusted so the distance (A) is the same after coupling the trailer to the tow vehicle and adjusting the hitch.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (95,1)


Fifth-Wheel and Gooseneck Trailering Fifth-wheel and gooseneck trailers can be used with many pickup models. These trailers place a larger percentage of the weight (kingpin weight) on the tow vehicle than conventional trailers. Make sure this weight does not cause the vehicle to exceed GAWR or GVWR. Fifth-wheel or gooseneck kingpin weight should be 15 to 25 percent of the trailer weight up to the maximum amount specified in the trailering chart for the vehicle. See “Weight of the Trailer” under Trailer Towing on page 9‑78 for more information. The hitch should be located in the pickup bed so that its centerline is over or slightly in front of the rear axle. Take care that it is not so far forward that it will contact the back of the cab in sharp turns. This is especially important for short box pickups. Trailer pin box extensions and sliding fifth-wheel hitch assemblies can help this condition.


There should be at least six inches of clearance between the top of the pickup box and the bottom of the trailer shelf that extends over the box. Make sure the hitch is attached to the tow vehicle frame rails. Do not use the pickup box for support. Safety Chains Always attach chains between the vehicle and the trailer. Cross the safety chains under the tongue of the trailer to help prevent the tongue from contacting the road if it becomes separated from the hitch. Instructions about safety chains may be provided by the hitch manufacturer or by the trailer manufacturer. If the trailer being towed weighs up to 2 271 kg (5,000 lbs) with a factory-installed step bumper, safety chains may be attached to the attaching points on the bumper; otherwise, safety chains should be attached to holes on the trailer hitch platform. Always


Driving and Operating


9-95


leave just enough slack so the combination can turn. Never allow safety chains to drag on the ground. Trailer Brakes A loaded trailer that weighs more than 900 kg (2,000 lbs) needs to have its own brake system that is adequate for the weight of the trailer. Be sure to read and follow the instructions for the trailer brakes so they are installed, adjusted, and maintained properly. Do not tap into the vehicle's hydraulic brake system. Auxiliary Battery The auxiliary battery provision can be used to supply electrical power to additional equipment that may be added, such as a slide-in camper. If the vehicle has this provision, this relay will be located on the driver side of the vehicle, next to the underhood electrical center.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (96,1)


9-96


Driving and Operating


Be sure to follow the proper installation instructions included with any electrical equipment that is installed. Notice: Leaving electrical equipment on for extended periods will drain the battery. Always turn off electrical equipment when not in use and do not use equipment that exceeds the maximum amperage rating of 40 amperes for the auxiliary battery provision. Trailer Wiring Harness The vehicle is equipped with one of the following wiring harnesses for towing a trailer or hauling a slide-in camper.


Basic Trailer Wiring All regular, extended cab and crew cab pickups have a seven-wire trailer towing harness. For vehicles not equipped with heavy duty trailering, the harness is secured to the vehicle's frame behind the spare tire mount. The harness requires the installation of a trailer connector, which is available through your dealer. If towing a light-duty trailer with a standard four-way round pin connector, an adapter is available from your dealer.


Heavy-DutyTrailer Wiring Harness Package


For vehicles equipped with heavy duty trailering, the harness connector is mounted in the bumper. The seven-wire harness contains the following trailer circuits: . Yellow: Left Stop/Turn Signal . Dark Green: Right Stop/Turn


Signal


. Brown: Taillamps . White: Ground


Light Green: Back-up Lamps


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (97,1)


Driving and Operating


9-97


. Red: Battery Feed* . Dark Blue: Trailer Brake* *The fuses for these two circuits are installed in the underhood electrical center, but the wires are not connected. They should be connected by your dealer or a qualified service center. The fuse and wire for the ITBC is factory installed and connected if the vehicle is equipped with an ITBC. The fuse for the battery feed is not required if the vehicle has an auxiliary battery. If the vehicle does not have an auxiliary battery, have your dealer or authorized service center install the required fuse. If charging a remote (non-vehicle) battery, press the Tow/Haul Mode button, if equipped, located at the end of the shift lever. This will boost the vehicle system voltage and properly charge the battery. If the trailer is too light for Tow/ Haul Mode, or the vehicle is not equipped with Tow/Haul, turn on the


headlamps as a second way to boost the vehicle system and charge the battery.


Camper/Fifth-Wheel Trailer Wiring Package The seven-wire camper harness is located under the front edge of the pickup box on the driver side of the vehicle, attached to the frame bracket. A connector must be added to the wiring harness which connects to the camper. The harness contains the following camper/trailer circuits: . Yellow: Left Stop/Turn Signal . Dark Green: Right Stop/Turn


Signal


. Brown: Taillamps . White: Ground


Light Green: Back-up Lamps


. Red: Battery Feed . Dark Blue: Trailer Brake


If the vehicle is equipped with the “Heavy-Duty Trailering” option, please refer to “Heavy-Duty Trailer Wiring Package” earlier in this section. When the camper-wiring harness is ordered without the heavy-duty trailering package, a seven-wire harness with a seven-pin connector is located at the rear of the vehicle and is tied to the vehicle's frame.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (98,1)


9-98


Driving and Operating


Electric Brake Control Wiring Provisions These wiring provisions are included with the vehicle as part of the trailer wiring package. These provisions are for an electric brake controller. The instrument panel contains blunt cut wires behind the steering column for the trailer brake controller. The harness contains the following wires: . Dark Blue: Brake Signal to


Trailer Connector


. Red/Black: Battery


Light Blue/White: Brake Switch


. White: Ground The harness should be installed by your dealer or a qualified service center. If the vehicle is equipped with an Integrated Trailer Brake Control (ITBC) System, the blunt cuts exist, but are not connected further in the


harness. If an aftermarket trailer brake controller is installed, the ITBC must be disconnected. Do not power both ITBC and aftermarket controllers to control the trailer brakes at the same time. Tow/Haul Mode


Pressing this button at the end of the shift lever turns on and off the Tow/Haul Mode.


This indicator light on the instrument panel cluster comes on when the Tow/Haul Mode is on. Tow/Haul is a feature that assists when pulling a heavy trailer or a large or heavy load. See Tow/Haul Mode on page 9‑39 for more information. Tow/Haul is designed to be most effective when the vehicle and trailer combined weight is at least 75 percent of the vehicle's Gross Combined Weight Rating (GCWR). See “Weight of the Trailer” under Trailer Towing on page 9‑78. Tow/ Haul is most useful under the following driving conditions: . When pulling a heavy trailer or a large or heavy load through rolling terrain.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (99,1)


Driving and Operating


9-99


. When pulling a heavy trailer


or a large or heavy load in stop-and-go traffic.


. When pulling a heavy trailer or


a large or heavy load in busy parking lots where improved low speed control of the vehicle is desired.


Operating the vehicle in Tow/Haul when lightly loaded or with no trailer at all will not cause damage. However, there is no benefit to the selection of Tow/Haul when the vehicle is unloaded. Such a selection when unloaded may result in unpleasant engine and transmission driving characteristics and reduced fuel economy. Tow/ Haul is recommended only when pulling a heavy trailer or a large or heavy load.


Integrated Trailer Brake Control System


The vehicle may have an Integrated Trailer Brake Control (ITBC) system for electric trailer brakes. This symbol is located on the Trailer Brake Control Panel on vehicles with an Integrated Trailer Brake Control system. The power output to the trailer brakes is based on the amount of brake pressure being applied by the vehicle’s brake system. This available power output to the trailer brakes can be adjusted to a wide range of trailering situations.


The ITBC system is integrated with the vehicle’s brake, antilock brake, and StabiliTrak (if equipped) systems. In trailering conditions that cause the vehicle’s antilock brake or StabiliTrak systems to activate, power sent to the trailer's brakes will be automatically adjusted to minimize trailer wheel lock-up. This does not imply that the trailer has StabiliTrak. Non-hybrid vehicles with StabiliTrak have a Trailer Sway Control (TSC) feature. See Trailer Sway Control (TSC) on page 9‑105. Non-hybrid vehicles with StabiliTrak have a Hill Start Assist (HSA) feature. See Hill Start Assist (HSA) on page 9‑54.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (100,1)


9-100


Driving and Operating


If the vehicle’s brake, antilock brake, or StabiliTrak systems are not functioning properly, the ITBC system may not be fully functional or may not function at all. Make sure all of these systems are fully operational to ensure full functionality of the ITBC system. The ITBC system is powered through the vehicle's electrical system. Turning the ignition off will also turn off the ITBC system. The ITBC system is fully functional only when the ignition is in ON or in RUN. The ITBC system can only be used with trailers with electric brakes.


{ WARNING


Connecting a trailer that is not compatible with the ITBC system may result in reduced or complete loss of trailer braking. There may be an increase in stopping distance or trailer instability which could result in personal injury or damage to the vehicle, trailer, or other property. An aftermarket controller may be available for use with trailers with surge, air, or electric‐over‐hydraulic trailer brake systems. To determine the type of brakes on the trailer and the availability of controllers, check with your trailer manufacturer or dealer.


When trailering, make sure of the following:


The ITBC system is used only with trailers that are equipped with electric brakes.


. All applicable local and federal


laws and regulations are followed.


. All electrical and mechanical connections to the trailer are made correctly. The trailer’s brakes are in proper working condition. The trailer and vehicle are properly loaded for the towing condition.


The ITBC system is a factory-installed item. Out-of-factory installation of this system should not be attempted. GM is not responsible for warranty or performance of the system resulting from out-of-factory installation.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (101,1)


Trailer Brake Control Panel


A. Manual Trailer Brake Apply


Lever


B. Trailer Gain Adjustment Buttons The ITBC system has a control panel located on the instrument panel to the left of the steering column. See Instrument Panel (Premium Version) on page 1‑6 or Instrument Panel (Base/Uplevel Version) on page 1‑2 for more information. The control panel allows adjustment to the amount of output, referred to as trailer gain,


Driving and Operating


9-101


available to the electric trailer brakes and allows manual application of the trailer brakes. The Trailer Brake Control Panel is used along with the Trailer Brake Display Page on the DIC to adjust and display power output to the trailer brakes.


Trailer Brake DIC Display Page The ITBC system displays messages on the vehicle’s Driver Information Center (DIC). See Driver Information Center (DIC) on page 5‑30 for more information. The display page indicates Trailer Gain setting, power output to the electric trailer brakes, trailer connection, and system operational status. The Trailer Brake Display Page can be displayed by performing any of the following actions: . Scrolling through the DIC menu


pages using the odometer trip stem or the DIC Vehicle Information button (if equipped).


. Pressing a Trailer Gain


button—If the Trailer Brake Display Page is not currently displayed, pressing a Trailer Gain button will first recall the current Trailer Gain setting. After the Trailer Brake Display Page is displayed, each press and release of the gain buttons will then cause the Trailer Gain setting to change.


. Activating the Manual Trailer


Brake Apply lever.


. Connecting a trailer equipped


with electric trailer brakes.


All DIC warning and service messages must first be acknowledged by the driver by pressing the odometer trip stem or the DIC Vehicle Information button (if equipped) before the Trailer Brake Display Page can be displayed and Trailer Gain can be adjusted.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (102,1)


9-102


Driving and Operating


TRAILER GAIN: This setting is displayed any time the Trailer Brake Display Page is active. This setting can be adjusted from 0.0 to 10.0
with either a trailer connected or disconnected. To adjust the Trailer Gain, press one of the Trailer Gain adjustment buttons located on the Trailer Brake Control Panel. Press and hold a gain button to cause the Trailer Gain to continuously adjust. To turn the output to the trailer off, adjust the Trailer Gain setting to 0.0 (zero). 0.0 (zero) gain is the factory default setting. To properly adjust trailer gain, see “Trailer Gain Adjustment Procedure” later in this section. TRAILER OUTPUT: This is displayed any time a trailer with electric brakes is connected. Output to the electric brakes is based on the amount of vehicle braking present and relative to the Trailer Gain setting. Output is displayed from 0 to 10 bars for each gain setting.


Non-hybrid vehicles with Trailer Sway Control (TSC) or Hill Start Assist (HSA), output to the electric trailer brakes may be displayed when the systems are active. See Trailer Sway Control (TSC) on page 9‑105 and Hill Start Assist (HSA) on page 9‑54. The Trailer Output will indicate “- - - - - -” on the Trailer Brake Display Page whenever the following occur: . No trailer is connected . A trailer without electric brakes is connected (no DIC message is displayed)


. A trailer with electric brakes


has become disconnected (a CHECK TRAILER WIRING message will also be displayed on the DIC) There is a fault present in the wiring to the electric trailer brakes (a CHECK TRAILER WIRING message will also be displayed on the DIC)


There is a fault in the ITBC system (a SERVICE TRAILER BRAKE SYSTEM message will also be displayed in the DIC)


Manual Trailer Brake Apply The Manual Trailer Brake Apply Lever is located on the Trailer Brake Control Panel and is used to apply the trailer’s electric brakes independent of the vehicle’s brakes. This lever is used in the Trailer Gain Adjustment Procedure to properly adjust the power output to the trailer brakes. Sliding the lever to the left will apply only the trailer brakes. The power output to the trailer is indicated in the Trailer Brake Display Page on the DIC. If the vehicle’s service brakes are applied while using the Manual Trailer Brake Apply Lever, the trailer output power will be the greater of the two. The trailer's and the vehicle's brake lamps will come on when either vehicle braking or manual trailer brakes are applied.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (103,1)


Driving and Operating


9-103


Trailer Gain Adjustment Procedure Trailer Gain should be set for a specific trailering condition and must be adjusted any time vehicle loading, trailer loading, or road surface conditions change. Setting the Trailer Gain properly is needed for the best trailer stopping performance. A trailer that is over-gained may result in locked trailer brakes. A trailer that is under-gained may result in not enough trailer braking. Both of these conditions may result in poorer stopping and stability of the vehicle and trailer. Use the following procedure to correctly adjust Trailer Gain for each towing condition: 1. Make sure the trailer brakes are


in proper working condition.


electrical connections. See Vehicle Load Limits on page 9‑16 for more information. 3. After the electrical connection is made to a trailer equipped with electric brakes:


A TRAILER CONNECTED message will be briefly displayed on the DIC. The Trailer Brake Display Page will appear on the DIC showing TRAILER GAIN and TRAILER OUTPUT. In the Trailer Output display on the DIC, “- - - - - -” will disappear if there is no error present. Connecting a trailer without electric brakes will not clear the six dashed lines.


2. Connect a properly loaded trailer


4. Adjust the Trailer Gain by using


to the vehicle and make all necessary mechanical and


the gain adjustment (+ / -) buttons on the Trailer Brake Control Panel.


5. Drive the vehicle with the trailer attached on a level road surface representative of the towing condition and free of traffic at about 32 to 40 km/h (20 to 25 mph) and fully apply the Manual Trailer Brake Apply Lever. Adjusting trailer gain at speeds lower than 32 to 40 km/h (20 to 25 mph) may result in an incorrect gain setting.


6. Adjust the Trailer Gain to just


below the point of trailer wheel lock-up, indicated by trailer wheel squeal or tire smoke when a trailer wheel locks. Trailer wheel lock-up may not occur if towing a heavily loaded trailer. In this case, adjust the Trailer Gain to the highest allowable setting for the towing condition.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (104,1)


9-104


Driving and Operating


7. Re-adjust Trailer Gain any time


vehicle loading, trailer loading or road surface conditions change or if trailer wheel lock-up is noticed at any time while towing.


Other ITBC-Related DIC Messages In addition to displaying TRAILER GAIN and TRAILER OUTPUT through the DIC, trailer connection and ITBC system status are displayed on the DIC. TRAILER CONNECTED: This message will be briefly displayed when a trailer with electric brakes is first connected to the vehicle. This message will automatically turn off in about 10 seconds. The driver can also acknowledge this message before it automatically turns off. CHECK TRAILER WIRING: This message will be displayed if: 1. The ITBC system first


determines connection to a trailer with electric brakes and then the trailer harness becomes disconnected from the vehicle.


If the disconnect occurs while the vehicle is stationary, this message will automatically turn off in about 30 seconds. This message will also turn off if the driver acknowledges this message or if the trailer harness is re-connected. If the disconnect occurs while the vehicle is moving, this message will continue until the ignition is turned off. This message will also turn off if the driver acknowledges this message or if the trailer harness is re-connected.


2. There is an electrical fault in


the wiring to the electric trailer brakes. This message will continue as long as there is an electrical fault in the trailer wiring. This message will also turn off if the driver acknowledges this message.


To determine if the electrical fault is on the vehicle side or trailer side of the trailer wiring harness connection, do the following: 1. Disconnect the trailer wiring


harness from the vehicle.


2. Turn the ignition off. 3. Wait 10 seconds, then turn the


4.


ignition back to RUN. If the CHECK TRAILER WIRING message re-appears, the electrical fault is on the vehicle side. If the CHECK TRAILER WIRING message only re-appears when connecting the trailer wiring harness to the vehicle, the electrical fault is on the trailer side.


SERVICE TRAILER BRAKE SYSTEM: This message will be displayed when there is a problem with the ITBC system. If this message persists over multiple ignition cycles, there is a problem with the ITBC system. Take the


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (105,1)


Driving and Operating


9-105


vehicle to an authorized GM dealer to have the ITBC system diagnosed and repaired. If either the CHECK TRAILER WIRING or SERVICE TRAILER BRAKE SYSTEM message is displayed while driving the vehicle, power is no longer available to the trailer brakes. When traffic conditions allow, carefully pull the vehicle over to the side of the road and turn the ignition off. Check the wiring connection to the trailer and turn the ignition back on. If either of these messages continues, either the vehicle or trailer needs service. An authorized GM dealer may be able to diagnose and repair problems with the trailer. However, any diagnosis and repair of the trailer is not covered under the vehicle warranty. Please contact your trailer dealer for assistance with trailer repairs and trailer warranty information.


Trailer Sway Control (TSC) Non-hybrid vehicles with StabiliTrak have a Trailer Sway Control (TSC) feature. If the vehicle is towing a trailer and the system detects that the trailer is swaying, the vehicle brakes are applied without the driver pressing the brake pedal. If the vehicle is equipped with the Integrated Trailer Brake Control (ITBC) system, StabiliTrak may also apply the trailer brakes. The TCS/ StabiliTrak warning light will flash on the instrument panel cluster to notify the driver to reduce speed. If the trailer continues to sway, StabiliTrak will reduce engine torque to help slow the vehicle. See StabiliTrak® System on page 9‑55 for more information. Adding non‐dealer accessories can affect the vehicle performance. See Accessories and Modifications on page 10‑3 for more information.


Conversions and Add-Ons


Add-On Electrical Equipment Notice: Do not add anything electrical to the vehicle unless you check with your dealer first. Some electrical equipment can damage the vehicle and the damage would not be covered by the vehicle's warranty. Some add-on electrical equipment can keep other components from working as they should. Add-on equipment can drain the vehicle's 12‐volt battery, even if the vehicle is not operating. The vehicle has an airbag system. Before attempting to add anything electrical to the vehicle, see Servicing the Airbag-Equipped Vehicle on page 3‑36 and Adding Equipment to the Airbag-Equipped Vehicle on page 3‑37.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (106,1)


9-106


Driving and Operating


Adding a Snow Plow or Similar Equipment Before installing a snow plow on the vehicle, here are some things you need to know: Notice: If the vehicle does not have the snow plow prep package, adding a plow can damage the vehicle, and the repairs would not be covered by warranty. Unless the vehicle was built to carry a snow plow, do not add one to the vehicle. If the vehicle has the snow plow prep package, called RPO VYU, then the payload the vehicle can carry will be reduced when a snow plow is installed. The vehicle can be damaged if either the front or rear axle ratings or the Gross Vehicle Weight Rating (GVWR) are exceeded.


Some vehicles are built with a special snow plow prep package, called RPO VYU. If the vehicle has this option, you can add a plow to it, provided certain weights, such as the weights on the vehicle's axles and the Gross Vehicle Weight Rating (GVWR), are not exceeded. The plow the vehicle can carry depends on many things, such as:


The options the vehicle came with, and the weight of those options. The weight and number of passengers intended to be carried. The weight of items added to the vehicle, like a tool box or truck cap. The total weight of any additional cargo intended to be carried.


Say, for example, you have a 318 kg (700 lb) snow plow. The total weight of all occupants and cargo inside the cab should not exceed 135 kg


(300 lb). This means that you may only be able to carry one passenger. But, even this may be too much if there is other equipment already adding to the weight of the vehicle. Here are some guidelines for safely carrying a snow plow on the vehicle: . Make sure the weight on the front and rear axles does not exceed the axle rating for each. For the front axle, if more cargo or passengers must be carried, appropriate counter ballast must be installed rear of the rear axle. Counter ballast must be properly secured so it will not move during driving. Follow the snow plow manufacturer's recommendations regarding rear ballast. Rear ballast may be required to ensure a proper front and rear weight distribution ratio, even though the actual weight at the front axle may be less than the front axle rating.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (107,1)


The snow plow manufacturer or installer can assist you in determining the amount of rear ballast required, to help make sure the snowplow/vehicle combination does not exceed the GVW rating, the front and rear axle ratings, and the front and rear weight distribution ratio. The total vehicle must not exceed the GVW rating.


Front axle reserve capacity is the difference between the Gross Axle Weight Rating (GAWR) and the front axle weight of the vehicle with full fuel and passengers. Basically, it is the amount of weight that can be added to the front axle before reaching the front GAWR. The front axle reserve capacity for the vehicle can be found in the lower right corner of the Certification/Tire label, as shown.


Driving and Operating


9-107


In order to calculate the amount of weight any front accessory, such as a snow plow, is adding to the front axle, use the following formula:


United States


Canada


(W x (A + W.B.)) /W.B.= Weight the accessory is adding to the front axle. Where:


W = Weight of added accessory A = Distance that the accessory is in front of the front axle W.B. = Vehicle Wheelbase


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (108,1)


9-108


Driving and Operating


For example, adding a 318 kg (700 lb) snow plow actually adds more than 318 kg (700 lb) to the front axle. Using the formula, if the snow plow is 122 cm (4 ft) in front of the front axle and the wheel base is 305 cm (10 ft), then:


W = 318 kg (700 lb) A = 122 cm (4 ft) W.B. = 305 cm (10 ft)


(W x (A + W.B.))/W.B. = (318 x (122 + 305))/305 = 445 kg (980 lbs) So, if the front axle reserve capacity is more than 445 kg (980 lbs), the snow plow could be added without exceeding the front GAWR. Heavier equipment can be added on the front of the vehicle if it is compensated for by carrying fewer passengers, less cargo, or by positioning cargo toward the rear. This has the effect of reducing the load on the front. However, the front GAWR, rear GAWR, and the Gross Vehicle Weight Rating (GVWR) must never be exceeded.


{ WARNING


On some vehicles that have certain front mounted equipment, such as a snow plow, it may be possible to load the front axle to the front gross axle weight rating (GAWR) but not have enough weight on the rear axle to have proper braking performance. If the brakes cannot work properly, you could have a crash. To help the brakes work properly when a snow plow is installed, always follow the snow plow manufacturer or installer's recommendation for rear ballast to ensure a proper front and rear weight distribution ratio, even though the actual front weight may be less than the front GAWR, and the total vehicle weight is less than the gross vehicle weight rating (GVWR). Maintaining a proper front and


(Continued)


WARNING (Continued)


rear weight distribution ratio is necessary to provide proper braking performance.


Total vehicle reserve capacity is the difference between the GVWR and the weight of the truck with full fuel and passengers. It is the amount of weight that can be added to the vehicle before reaching the GVWR. Keep in mind that reserve capacity numbers are intended as a guide when selecting the amount of equipment or cargo the truck can carry. If unsure of the vehicle's front, rear, or total weight, go to a weigh station and weigh the vehicle. Your dealer can also help with this. The total vehicle reserve capacity for the vehicle can be found in the lower right corner of the Certification/Tire label as shown previously.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (109,1)


Driving and Operating


9-109


See your dealer for additional advice and information about using a snow plow on the vehicle. Also, see Vehicle Load Limits on page 9‑16. Emergency Roof Lamp Provisions Vehicles with the RPO VYU snow plow prep package also have an emergency roof lamp provision package, RPO TRW. Wiring for the emergency roof lamp is provided above the overhead console. See Auxiliary Roof-Mounted Lamp on page 6‑6 for switch location.


Pickup Conversion to Chassis Cab We are aware that some vehicle owners might consider having the pickup box removed and a commercial or recreational body installed. Owners should be aware that, as manufactured, there are differences between a chassis cab and a pickup with the box removed which could affect vehicle safety. The components necessary to adapt a pickup to permit its safe use with a specialized body should be installed by the body builder.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (110,1)


9-110


Driving and Operating


2 NOTES


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (1,1)


Vehicle Care


General Information


General Information . . . . . . . . . . 10-2
California Proposition


65 Warning . . . . . . . . . . . . . . . . . 10-3


California Perchlorate


Materials Requirements . . . . 10-3


Accessories and


Modifications . . . . . . . . . . . . . . . 10-3


Vehicle Checks Doing Your Own


Service Work . . . . . . . . . . . . . . . 10-4
Hood . . . . . . . . . . . . . . . . . . . . . . . . 10-5
Engine Compartment


Overview . . . . . . . . . . . . . . . . . . . 10-6
Engine Oil . . . . . . . . . . . . . . . . . . . 10-7
Engine Oil Life System . . . . . 10-10
Automatic Transmission Fluid


(4-Speed Transmission) . . . 10-11


Automatic Transmission


Fluid (6-Speed Transmission) . . . . . . . . . . . . . 10-14
Engine Air Cleaner/Filter . . . . 10-17
Cooling System . . . . . . . . . . . . 10-18
Engine Coolant . . . . . . . . . . . . . 10-19
Engine Overheating . . . . . . . . 10-22


Overheated Engine


Protection Operating Mode . . . . . . . . . . . 10-24
Engine Fan . . . . . . . . . . . . . . . . . 10-24
Power Steering Fluid . . . . . . . 10-25
Washer Fluid . . . . . . . . . . . . . . . 10-26
Brakes . . . . . . . . . . . . . . . . . . . . . 10-27
Brake Fluid . . . . . . . . . . . . . . . . . 10-28
Battery . . . . . . . . . . . . . . . . . . . . . 10-30
Four-Wheel Drive . . . . . . . . . . . 10-30
Front Axle . . . . . . . . . . . . . . . . . . 10-31
Rear Axle . . . . . . . . . . . . . . . . . . 10-32
Noise Control System . . . . . . 10-34
Starter Switch Check . . . . . . . 10-35
Automatic Transmission Shift


Lock Control Function Check . . . . . . . . . . . . . . . . . . . . . 10-35


Ignition Transmission Lock


Check . . . . . . . . . . . . . . . . . . . . . 10-35


Park Brake and P (Park)


Mechanism Check . . . . . . . . 10-36


Wiper Blade


Replacement . . . . . . . . . . . . . . 10-36
Glass Replacement . . . . . . . . 10-37


Headlamp Aiming


Headlamp Aiming . . . . . . . . . . 10-37


Vehicle Care


10-1


Bulb Replacement


Bulb Replacement . . . . . . . . . . 10-39
Halogen Bulbs . . . . . . . . . . . . . . 10-39
Headlamps, Front Turn


Signal, Sidemarker, and Parking Lamps . . . . . . . . . . . . 10-39


Pick-Up Box Identification


and Fender Marker Lamps . . . . . . . . . . . . . . . . . . . . 10-40


Taillamps (Chassis Cab


Models) . . . . . . . . . . . . . . . . . . . 10-40


Taillamps, Turn Signal,


Stoplamps, and Back-Up Lamps . . . . . . . . . . . . . . . . . . . . 10-41


Center High-Mounted


Stoplamp (CHMSL) and Cargo Lamp . . . . . . . . . . . . . . 10-42
License Plate Lamp . . . . . . . . 10-42
Replacement Bulbs . . . . . . . . . 10-43


Electrical System


Electrical System


Overload . . . . . . . . . . . . . . . . . . 10-43


Fuses and Circuit


Breakers . . . . . . . . . . . . . . . . . . 10-44


Engine Compartment Fuse


Block . . . . . . . . . . . . . . . . . . . . . 10-44


Instrument Panel Fuse


Block . . . . . . . . . . . . . . . . . . . . . 10-48


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (2,1)


10-2


Vehicle Care


Wheels and Tires


Tires . . . . . . . . . . . . . . . . . . . . . . . . 10-50
Tire Sidewall Labeling . . . . . . 10-52
Tire Designations . . . . . . . . . . . 10-54
Tire Terminology and


Definitions . . . . . . . . . . . . . . . . 10-55
Tire Pressure . . . . . . . . . . . . . . . 10-58
Tire Pressure for High-Speed


Operation . . . . . . . . . . . . . . . . . 10-60


Tire Pressure Monitor


System . . . . . . . . . . . . . . . . . . . 10-60


Tire Pressure Monitor


Operation . . . . . . . . . . . . . . . . . 10-62
Tire Inspection . . . . . . . . . . . . . . 10-65
Tire Rotation . . . . . . . . . . . . . . . 10-65
Dual Tire Rotation . . . . . . . . . . 10-67
When It Is Time for New


Tires . . . . . . . . . . . . . . . . . . . . . . 10-68
Buying New Tires . . . . . . . . . . . 10-68
Different Size Tires and


Wheels . . . . . . . . . . . . . . . . . . . 10-70


General Information For service and parts needs, visit your dealer. You will receive genuine GM parts and GM-trained and supported service people. Genuine GM parts have one of these marks:


Uniform Tire Quality


Grading . . . . . . . . . . . . . . . . . . . 10-70


Wheel Alignment and Tire


Balance . . . . . . . . . . . . . . . . . . . 10-72
Wheel Replacement . . . . . . . . 10-72
Tire Chains . . . . . . . . . . . . . . . . . 10-74
If a Tire Goes Flat . . . . . . . . . . 10-75
Tire Changing . . . . . . . . . . . . . . 10-76
Full-Size Spare Tire . . . . . . . . 10-87


Jump Starting


Jump Starting . . . . . . . . . . . . . . 10-88


Towing


Towing the Vehicle . . . . . . . . . 10-93
Recreational Vehicle


Towing . . . . . . . . . . . . . . . . . . . . 10-93


Appearance Care


Exterior Care . . . . . . . . . . . . . . . 10-98
Interior Care . . . . . . . . . . . . . . . 10-101
Floor Mats . . . . . . . . . . . . . . . . 10-104


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (3,1)


California Proposition 65 Warning Most motor vehicles, including this one, contain and/or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Engine exhaust, many parts and systems, many fluids, and some component wear by-products contain and/or emit these chemicals.


California Perchlorate Materials Requirements Certain types of automotive applications, such as airbag initiators, safety belt pretensioners, and lithium batteries contained in Remote Keyless Entry transmitters, may contain perchlorate materials. Special handling may be necessary. For additional information, see www.dtsc.ca.gov/hazardouswaste/ perchlorate.


Vehicle Care


10-3


Accessories and Modifications Adding non‐dealer accessories or making modifications to the vehicle can affect vehicle performance and safety, including such things as airbags, braking, stability, ride and handling, emissions systems, aerodynamics, durability, and electronic systems like antilock brakes, traction control, and stability control. These accessories or modifications could even cause malfunction or damage not covered by the vehicle warranty.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (4,1)


10-4


Vehicle Care


Damage to vehicle components resulting from modifications or the installation or use of non‐GM certified parts, including control module or software modifications, is not covered under the terms of the vehicle warranty and may affect remaining warranty coverage for affected parts. GM Accessories are designed to complement and function with other systems on the vehicle. See your dealer to accessorize the vehicle using genuine GM Accessories installed by a dealer technician. Also, see Adding Equipment to the Airbag-Equipped Vehicle on page 3‑37.


Vehicle Checks


Doing Your Own Service Work If the vehicle is a hybrid, see the hybrid supplement for more information.


{ WARNING


It can be dangerous to work on your vehicle if you do not have the proper knowledge, service manual, tools, or parts. Always follow owner manual procedures and consult the service manual for your vehicle before doing any service work.


If doing some of your own service work, use the proper service manual. It tells you much more about how to service the vehicle than this manual can. To order the proper service manual, see Service Publications Ordering Information on page 13‑16. This vehicle has an airbag system. Before attempting to do your own service work, see Airbag System Check on page 3‑38. Keep a record with all parts receipts and list the mileage and the date of any service work performed. See Maintenance Records on page 11‑16.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (5,1)


Hood To open the hood:


1. Pull the handle with this symbol


on it. It is located inside the vehicle to the lower left of the steering wheel.


2. Then go to the front of the


vehicle and locate the secondary hood release, near the center of the grille.


Vehicle Care


10-5


3. Push the secondary hood


release to the right.


4. Lift the hood.


Before closing the hood, be sure all the filler caps are on properly. Then bring the hood from full open to within 152 mm (6 in) from the closed position, pause, then push the front center of the hood with a swift, firm motion to fully close the hood.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (6,1)


10-6


Vehicle Care


Engine Compartment Overview


5.3 L V8 Engine Shown (4.3 L V6 Engine, 4.8 L V8 Engine, 6.0 L V8 Engine, and 6.2 L V8 Engine Similar)


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (7,1)


A. Engine Air Cleaner/Filter on


H. Engine Oil Dipstick (Out of


page 10‑17.


B. Coolant Surge Tank and


Pressure Cap. See Cooling System on page 10‑18.


C. Positive (+) Terminal. See Jump


Starting on page 10‑88. D. Battery on page 10‑30. E. Remote Negative (−) Terminal


(Out of View). See Jump Starting on page 10‑88. F. Automatic Transmission


Dipstick (Out of View). See “Checking the Fluid Level” under Automatic Transmission Fluid (4-Speed Transmission) on page 10‑11 or Automatic Transmission Fluid (6-Speed Transmission) on page 10‑14.


View). See “Checking Engine Oil” under Engine Oil on page 10‑7. Engine Cooling Fan (Out of View). See Cooling System on page 10‑18.


I.


J. Power Steering Fluid Reservoir.


See Power Steering Fluid on page 10‑25.


K. Brake Master Cylinder


Reservoir. See Brake Fluid on page 10‑28.


L. Engine Compartment Fuse


Block on page 10‑44.


M. Windshield Washer Fluid


Reservoir. See “Adding Washer Fluid” under Washer Fluid on page 10‑26.


G. Engine Oil Fill Cap. See “When


to Add Engine Oil” under Engine Oil on page 10‑7.


If the vehicle has a diesel engine and/or an Allison Transmission, see the Duramax Diesel Supplement.


Vehicle Care


10-7


Engine Oil For diesel engine vehicles, see “Engine Oil” in the Duramax Diesel Supplement. To ensure proper engine performance and long life, careful attention must be paid to engine oil. Following these simple, but important steps will help protect your investment: . Always use engine oil approved to the proper specification and of the proper viscosity grade. See “Selecting the Right Engine Oil” in this section.


. Check the engine oil level regularly and maintain the proper oil level. See “Checking Engine Oil” and “When to Add Engine Oil” in this section.


. Change the engine oil at the


appropriate time. See Engine Oil Life System on page 10‑10. . Always dispose of engine oil


properly. See “What to Do with Used Oil” in this section.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (8,1)


10-8


Vehicle Care


Checking Engine Oil It is a good idea to check the engine oil level at each fuel fill. In order to get an accurate reading, the vehicle must be on level ground. The engine oil dipstick handle is a yellow loop. See Engine Compartment Overview on page 10‑6 for the location of the engine oil dipstick. Obtaining an accurate oil level reading is essential: 1.


If the engine has been running recently, turn off the engine and allow several minutes for the oil to drain back into the oil pan. Checking the oil level too soon after engine shutoff will not provide an accurate oil level reading.


2. Pull out the dipstick and clean


it with a paper towel or cloth, then push it back in all the way. Remove it again, keeping the tip down, and check the level.


When to Add Engine Oil


If the oil is below the cross-hatched area at the tip of the dipstick, add 1 L (1 qt) of the recommended oil and then recheck the level. See “Selecting the Right Engine Oil” in this section for an explanation of what kind of oil to use. For engine oil crankcase capacity, see Capacities and Specifications on page 12‑2. Notice: Do not add too much oil. Oil levels above or below the acceptable operating range shown on the dipstick are harmful to the engine. If you find that you have an oil level above the operating range, i.e., the engine


has so much oil that the oil level gets above the cross-hatched area that shows the proper operating range, the engine could be damaged. You should drain out the excess oil or limit driving of the vehicle and seek a service professional to remove the excess amount of oil. See Engine Compartment Overview on page 10‑6 for the location of the engine oil fill cap. Add enough oil to put the level somewhere in the proper operating range. Push the dipstick all the way back in when through. Selecting the Right Engine Oil Selecting the right engine oil depends on both the proper oil specification and viscosity grade. See Recommended Fluids and Lubricants on page 11‑12.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (9,1)


Specification Use and ask for licensed engine oils with the dexos1™ approved certification mark. Engine oils meeting the requirements for the vehicle should have the dexos™1
approved certification mark. This certification mark indicates that the oil has been approved to the dexos1 specification.


Notice: Failure to use the recommended engine oil or equivalent can result in engine damage not covered by the vehicle warranty. Check with your dealer or service provider on whether the oil is approved to the dexos1 specification.


Viscosity Grade SAE 5W‐30 is the best viscosity grade for the vehicle. Do not use other viscosity grade oils such as SAE 10W‐30, 10W‐40, or 20W‐50. If in an area of extreme cold, where the temperature falls below −20°F (−29°C), an SAE 0W‐30 oil should be used. An oil of this viscosity grade will provide easier cold starting for the engine at extremely low temperatures. When selecting an oil of the appropriate viscosity grade, always select an oil that meets the dexos1 specification or equivalent. See “Specification” for more information. Engine Oil Additives/Engine Oil Flushes Do not add anything to the oil. The recommended oils with the dexos specification and displaying the dexos certification mark are all that is needed for good performance and engine protection.


Vehicle Care


10-9


Engine oil system flushes are not recommended and could cause engine damage not covered by the vehicle warranty. What to Do with Used Oil Used engine oil contains certain elements that can be unhealthy for your skin and could even cause cancer. Do not let used oil stay on your skin for very long. Clean your skin and nails with soap and water, or a good hand cleaner. Wash or properly dispose of clothing or rags containing used engine oil. See the manufacturer's warnings about the use and disposal of oil products. Used oil can be a threat to the environment. If you change your own oil, be sure to drain all the oil from the filter before disposal. Never dispose of oil by putting it in the trash or pouring it on the ground, into sewers, or into streams or bodies of water. Recycle it by taking it to a place that collects used oil.


GMC Sierra Owner Manual - 2012 - CRC - 11/15/11


Black plate (10,1)


10-10


Vehicle Care


Engine Oil Life System


When to Change Engine Oil This vehicle has a computer system that indicates when to change the engine oil and filter. This is based on a combination of factors which include engine revolutions, engine temperature, and miles driven. Based on driving conditions, the mileage at which an oil change is indicated can vary considerably. For the oil life system to work properly, the system must be reset every time the oil is changed. On some vehicles, when the system has calculated that oil life has been diminished, a CHANGE ENGINE OIL SOON message comes on to indicate that an oil change is necessary. See Engine Oil

Loading...
x