2016 Ford Fusion Owners Manual

Indicator (page 45). Note: The passenger sensing system will deactivate the passenger seat-mounted side airbag if it detects an empty passenger seat. The design and development of the side airbag system included recommended testing procedures that were developed by a group of automotive safety experts known as the Side Airbag Technical Working Group. These recommended testing procedures help reduce the risk of injuries related to the deployment of side airbags. DRIVER AND PASSENGER KNEE AIRBAGS Driver and passenger knee airbags are located under or within the instrument panel. During a crash, the restraints control module may activate the driver and passenger knee airbags (individually or both) based on crash severity and respective occupant conditions. Under certain crash and occupant conditions, the driver and passenger knee airbags may deploy (individually or both) but the corresponding front airbag may not activate. As with front and side airbags, it is important to be properly seated and restrained to reduce the risk of death or serious injury.

WARNINGS

Do not lean your head on the door. The side airbag could injure you as it deploys from the side of the

seatback.

Do not attempt to service, repair, or modify the airbag, its fuses or the seat cover on a seat containing an

airbag as you could be seriously injured or killed. Contact your authorized dealer as soon as possible.

If the side airbag has deployed, the airbag will not function again. The side airbag system (including the

seat) must be inspected and serviced by an authorized dealer. If the airbag is not replaced, the unrepaired area will increase the risk of injury in a crash.

The side airbags are located on the outboard side of the seatbacks of the front seats. In certain sideways crashes, the airbag on the side affected by the crash will be inflated. The airbag was designed to inflate between the door panel and occupant to further enhance the protection provided occupants in side impact crashes.

43

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E152533Supplementary Restraints System

The side curtain airbags will deploy during significant side crashes. The side curtain airbags are mounted to the roof side-rail sheet metal, behind the headliner, above each row of seats. In certain sideways crashes, the side curtain airbag on the impacted side of the vehicle will be activated. The side curtain airbags are designed to inflate between the side window area and occupants to further enhance protection provided in side impact crashes. The system consists of the following:

•

Side curtain airbags located above the trim panels over the front and rear side windows identified by a label or wording on the headliner or roof-pillar trim.

• A flexible headliner which opens above the side doors to allow side air curtain deployment.

Crash sensors and monitoring system with readiness indicator. See Crash Sensors and Airbag

Indicator (page 45). Children 12 years old and under should always be properly restrained in the back seats. The side curtain airbags will not interfere with children restrained using a properly installed child or booster seat because it is designed to inflate downward from the headliner above the doors along the side window opening.

Make sure the knee airbags are operating properly. See Crash Sensors and Airbag Indicator

(page 45).

SIDE CURTAIN AIRBAGS

WARNINGS

Do not place objects or mount equipment on or near the headliner at the siderail that may come into

contact with a deploying side curtain airbag. Failure to follow these instructions may increase the risk of personal injury in the event of a crash.

Do not lean your head on the door. The side curtain airbag could injure you as it deploys from the headliner. Do not attempt to service, repair, or modify the side curtain airbags, its fuses, the A, B, or C pillar trim, or the

headliner on a vehicle containing side curtain airbags. Contact your authorized dealer as soon as possible.

All occupants of the vehicle including the driver should always wear their safety belts even when an airbag supplemental restraint system and side curtain airbag is provided.

To reduce risk of injury, do not obstruct or place objects in the deployment path of the side curtain

airbag.

If the side curtain airbags have deployed, the side curtain airbags will not function again. The side

curtain airbags (including the A, B and C pillar trim and headliner) must be inspected and serviced by an authorized dealer. If the side curtain airbag is not replaced, the unrepaired area will increase the risk of injury in a crash.

44

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E75004Supplementary Restraints System

The design and development of the side curtain airbags included recommended testing procedures that were developed by a group of automotive safety experts known as the Side Airbag Technical Working Group. These recommended testing procedures help reduce the risk of injuries related to the deployment of side curtain airbags. CRASH SENSORS AND AIRBAG INDICATOR WARNING

Modifying or adding equipment to the front end of the vehicle (including frame, bumper, front end body

structure and tow hooks) may affect the performance of the airbag system, increasing the risk of injury. Do not modify the front end of the vehicle.

Your vehicle has a collection of crash and occupant sensors which provide information to the restraints control module. The restraints control module deploys (activates) the front safety belt pretensioners, driver airbag, passenger airbag, knee airbag(s), seat mounted side airbags, side curtain airbags and optional rear inflatable safety belts. Based on the type of crash (frontal impact or side impact), the restraints control module will deploy the appropriate safety devices. The restraints control module also monitors the readiness of the above safety devices plus the crash and occupant sensors. The readiness of the safety system is indicated by a warning indicator light in the instrument cluster or by a backup tone if the warning light is not working. Routine maintenance of the airbag is not required. A difficulty with the system is indicated by one or more of the following:

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

The readiness light will not illuminate immediately after the ignition is turned on.

•

The readiness light will either flash or stay lit.

• A series of five beeps will be heard. The

tone pattern will repeat periodically until the problem, the light or both are repaired.

If any of these things happen, even intermittently, have the supplemental restraint system serviced at an authorized dealer immediately. Unless serviced, the system may not function properly in the event of a crash. The safety belt pretensioners and the front airbag supplemental restraint system are designed to activate when the vehicle sustains frontal deceleration sufficient to cause the restraints control module to deploy a safety device. The fact that the safety belt pretensioners or front airbags did not activate for both front seat occupants in a crash does not mean that something is wrong with the system. Rather, it means the restraints control module determined the accident conditions (crash severity, belt usage) were not appropriate to activate these safety devices. •

The design of the front airbags is to activate only in frontal and near-frontal crashes (not rollovers, side impacts or rear impacts) unless the crash causes sufficient frontal deceleration. The safety belt pretensioners and optional rear inflatable safety belts are designed to activate in frontal, near-frontal and side crashes.

•

45

Supplementary Restraints System

•

•

The knee airbag(s) may deploy based on crash severity and occupant conditions. The design of the side airbags and side curtain airbags is to inflate in certain side impact crashes. Side airbags and side curtain airbags may activate in other types of crashes if the vehicle experiences sufficient sideways motion or deformation.

AIRBAG DISPOSAL Contact your authorized dealer as soon as possible. Airbags must be disposed of by qualified personnel.

46

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Keys and Remote Controls

GENERAL INFORMATION ON RADIO FREQUENCIES This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Note: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term IC before the radio certification number only signifies that Industry Canada technical specifications were met. The typical operating range for your transmitter is approximately 33 feet (10
meters). Vehicles with the remote start feature will have a greater range. One of the following could cause a decrease in operating range: • Weather conditions. • Nearby radio towers. • • Other vehicles parked next to your

Structures around the vehicle.

vehicle.

•

Intelligent Access (If Equipped) The system uses a radio frequency signal to communicate with your vehicle and authorize your vehicle to unlock when one of the following conditions are met: •

You activate the front exterior door handle switch. You press the luggage compartment button. • You press a button on the transmitter. If excessive radio frequency interference is present in the area or if the transmitter battery is low, you may need to mechanically unlock your door. You can use the mechanical key blade in your intelligent access key to open the driver door in this situation. See Remote Control (page 47). REMOTE CONTROL Integrated Keyhead Transmitters (If Equipped) Use the key blade to start your vehicle and unlock or lock the driver door from outside your vehicle. The transmitter portion functions as the remote control.

The radio frequency used by your remote control can also be used by other short distance radio transmissions, for example amateur radios, medical equipment, wireless headphones, remote controls and alarm systems. If the frequencies are jammed, you will not be able to use your remote control. You can lock and unlock the doors with the key. Note: Make sure to lock your vehicle before leaving it unattended. Note: If you are in range, the remote control will operate if you press any button unintentionally.

47

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Press the button to release the key. Press and hold the button to fold the key back in when not in use.

E151797Keys and Remote Controls

Note: The keys that came with your vehicle have a security tag that provides important vehicle key cut information. Keep the tag in a safe place for future reference. Intelligent Access Key (If Equipped)

Slide the release on the back of the remote control and pivot the cover off to access the key blade.

Your intelligent access keys operate the power locks and the remote start system. The key must be in your vehicle to activate the push-button start system. Removable Key Blade The intelligent access key also contains a removable mechanical key blade that you can use to unlock the driver door.

Note: The backup keys that came with your vehicle have a security tag that provides important vehicle key cut information. Keep the tag in a safe place for future reference. Using the Key Blade The key cylinder is under a cap on the driver door handle. To remove the cap:

48

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E151795E144506E151796E151795Keys and Remote Controls

Replacing the Battery Note: Refer to local regulations when disposing of transmitter batteries. Note: Do not wipe off any grease on the battery terminals or on the back surface of the circuit board. Note: Replacing the battery will not delete the transmitter from the vehicle. The transmitter should operate normally. A message appears in the information display when the remote control battery is low. See Information Messages (page 105). Integrated Keyhead Transmitter The remote control uses one coin-type three-volt lithium battery CR2032 or equivalent. Press the button to release the key before beginning the procedure.

1.

Insert a screwdriver in the position shown and gently push the clip.

2. Press the clip down to release the

battery cover.

1.

Insert the key blade into the slot on the bottom of the handle and press up. 2. Applying upward pressure, move the

cap rearward to release it. Gently remove the key while doing so.

To install the cap:

1. Place the cap just forward of the key

cylinder.

2. Applying pressure to the cap, move it

forward until it is in place. You may hear a snap as it engages.

Make sure you have properly installed the cap by trying to move it rearward.

49

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E151956E151957E151798Keys and Remote Controls

6.

Install a new battery with the + facing up.

7. Replace the battery cover. Intelligent Access Transmitter The remote control uses two coin-type three-volt lithium batteries CR2025 or equivalent.

1. Slide the release on the back of the

remote control and pivot the cover off.

2.

Insert a coin into the slot and twist to separate the housing.

3. Carefully remove the cover.

Note: Do not touch the battery contacts or the printed circuit board with the screwdriver. 4.

Insert a screwdriver as shown to release the battery.

5. Remove the battery.

50

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E151799E151801E151796E153890Keys and Remote Controls

Note: Do not use remote start if your vehicle is low on fuel.

The remote start button is on the transmitter.

This feature allows you to start your vehicle from outside the vehicle. The transmitter has an extended operating range. If your vehicle has automatic climate control, you can configure it to operate when you remote start your vehicle. See Climate Control (page 120). See Information Displays (page 96). A manual climate control system will run at the setting it was set to when you switched the vehicle off. Many states and provinces have restrictions for the use of remote start. Check your local and state or provincial laws for specific requirements regarding remote start systems. The remote start system will not work if: • • • • • • • Remote Control Feedback (If Equipped) An LED on the remote control provides status feedback of remote start or stop commands.

The ignition is on. The alarm system triggered. You disable the feature. The hood is open. The transmission is not in park (P). The vehicle battery voltage is too low. The service engine soon light is on.

3. Remove the batteries. 4.

Install new batteries with the + facing each other.

Note: Make sure to replace the label between the two batteries. 5. Reinstall the housing and cover. Car Finder

Press the button twice within three seconds. The horn sounds and the direction indicators

flash. We recommend you use this method to locate your vehicle, rather than using the panic alarm. Sounding a Panic Alarm Note: The panic alarm will only operate when the ignition is off.

Press the button to activate the alarm. Press the button again or switch the ignition on to

deactivate. Remote Start (If Equipped) WARNING

To avoid exhaust fumes, do not use remote start if your vehicle is parked indoors or areas that are not well

ventilated.

51

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E153891E138623E138624E138625Keys and Remote Controls

Note: If you remote start the vehicle with an integrated keyhead transmitter, you must switch the ignition on before driving your vehicle. With an intelligent access transmitter, you must press the START/STOP button on the instrument panel once while applying the brake pedal before driving your vehicle. The power windows will not work during the remote start and the radio will not turn on automatically. The parking lamps will remain on and the vehicle will run for 5, 10 or 15 minutes, depending on the setting. Extending the Vehicle Run Time Repeat Steps 1 and 2 with the vehicle still running to extend the run time for another remote start duration. If you programmed the duration to last 10 minutes, the second 10 minutes will begin after what is left of the first activation time. For example, if the vehicle had been running from the first remote start for five minutes, the vehicle will continue to run now for a total of 15
minutes. You can extend the remote start up to a maximum of 35 minutes. Wait at least five seconds before remote starting after a vehicle shutdown. Turning the Vehicle Off After Remote Starting

Press the button once. The vehicle and parking lamps will turn off.

You may have to be closer to the vehicle than when starting due to ground reflection and the added noise of the running vehicle. You can disable or enable the remote start system through the information display. See (page 96).

LED

Solid green.

Solid red.

Status

Remote start or

extension successful. Remote stop

successful; vehicle

off.

Blinking red.

Blinking green.

Remote start or

stop failed.

Waiting for status

update.

Remote Starting the Vehicle Note: You must press each button within three seconds of each other. Your vehicle will not remote start if you do not follow this sequence.

The tag with your transmitter details the starting procedure. To remote start your vehicle: 1. Press the lock button to lock all the

doors.

2. Press the remote start button twice.

The exterior lamps flash twice.

The horn sounds if the system fails to start, unless quiet start is on. Quiet start will run the blower fan at a slower speed to reduce noise. It can be switched on or off in the information display. See (page 96).

52

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E138626E138625Keys and Remote Controls

Memory Feature If programmed to a pre-set position, the integrated keyhead transmitter or intelligent access key recalls the driver seat and exterior mirror positions when you unlock your vehicle. It also recalls the power steering column and pedal positions. See Memory Function (page 134). REPLACING A LOST KEY OR REMOTE CONTROL Replacement keys or remote controls can be purchased from an authorized dealer. Authorized dealers can program remote controls for your vehicle. See Passive Anti-Theft System (page 68). To re-program the passive anti-theft system see an authorized dealer.

53

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

MyKey™

Non-configurable Settings The following settings cannot be changed by an admin key user: •

Safety belt reminder. You cannot disable this feature. The audio system will mute when the front seat passengers’ safety belts are not fastened. Early low fuel or charge. The low-fuel or low charge warning activates earlier, giving the MyKey user more time to refuel or recharge.

•

• Driver assist features, if equipped on

your vehicle, are forced on: parking aid and Blind Spot Information System (BLIS) with cross traffic alert. Satellite radio adult content restrictions, if equipped on your vehicle.

•

Configurable Settings With an admin key, you can configure certain MyKey settings when you first create a MyKey and before you recycle the key or restart the vehicle. You can also change the settings afterward with an admin key. • A vehicle speed limit can be set.

Warnings will be shown in the display followed by an audible tone when your vehicle reaches the set speed. You cannot override the set speed by fully depressing the accelerator pedal or by setting cruise control. WARNING

Do not set MyKey maximum speed limit to a limit that will prevent the driver from maintaining a safe speed

considering posted speed limits and prevailing road conditions. The driver is always responsible to drive in accordance with local laws and prevailing conditions. Failure to do so could result in accident or injury.

PRINCIPLE OF OPERATION MyKey allows you to program keys with restricted driving modes to promote good driving habits. All but one of the keys can be activated with these restricted modes. Any keys that remain unprogrammed are referred to as administrator keys or admin keys. They can be used to: • Create a MyKey. • Program configurable MyKey settings. • Clear all MyKey features. When you have created a MyKey, you can access the following information by using the information display to determine: • How many admin keys and MyKeys are

programmed to your vehicle. The total distance your vehicle traveled with a MyKey.

Note: Switch the vehicle on to use the system. Note: All MyKeys are programmed to the same settings. You cannot program them individually. Note: For vehicles equipped with push-button start, when both a MyKey and an admin remote transmitter are present, the admin remote transmitter will be recognized by the vehicle while switching the vehicle on to start the vehicle.

•

54

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

MyKey™

• Various vehicle speed minders can be set. Once you select a speed, it will be shown in the display, followed by an audible tone when the preselected vehicle speed is exceeded.

• Audio system maximum volume of

45%. A message will be shown in the display when you attempt to exceed the limited volume. Also, the speed-sensitive or compensated automatic volume control will be disabled.

• Always on setting. When this is

selected, you will not be able to switch off Advance Trac or traction control, 911 Assist or Emergency Assist, or the do not disturb feature (if your vehicle is equipped with these features).

Message

Settings MyKey Create MyKey

When prompted, hold the OK button until you see a message informing you to label this key as a MyKey. The key will be restricted at the next start. MyKey is successfully created. Make sure you label it so you can distinguish it from the admin keys. You can also program configurable settings for the key(s). See Programming/Changing Configurable Settings.

Message

Settings MyKey

CREATING A MYKEY Use the information display to create a MyKey: 1. Insert the key you want to program into the ignition. If your vehicle is equipped with a push-button start, place the intelligent access key fob into the backup slot. The location of your backup slot is in another chapter. See Starting and Stopping the Engine (page 146). 2. Switch the ignition on. 3. Access the main menu on the information display controls. Use the arrow keys to get to the following menu selections:

Action and Description

Press the OK button or the right arrow key. Press the OK button or the right arrow key. Press the OK button or the right arrow key.

Programming/Changing Configurable Settings Use the information display to access your configurable MyKey settings. 1. Switch the ignition on using an admin

key or fob.

2. Access the main menu on the

information display controls. Use the arrow keys to get to the following menu selections:

Action and Description

Press the OK button or the right arrow key. Press the OK button or the right arrow key.

55

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

MyKey™

Note: You can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey. Once you have switched the vehicle off, however, you will need an admin key to change or clear your MyKey settings.

CLEARING ALL MYKEYS You can clear or change your MyKey settings using the information display control on the steering wheel. See Information Displays (page 96). Switch the ignition on using an admin key or fob.

To clear all MyKeys of all MyKey settings, press the left arrow button to access the main menu and scroll to:

Message

Action and Description

Settings MyKey Clear MyKey

Press the OK button. Press the OK button. Press and hold the OK button until the following message displays.

All MyKeys Cleared Note: When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status.

56

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

MyKey™

CHECKING MYKEY SYSTEM STATUS

You can find information on programmed MyKey(s) using the information display control on the steering wheel. See Information Displays (page 96).

To find information on programmed MyKey(s), press the left arrow button to access the main menu and scroll to:

Message

Description

Settings MyKey Select one of the following: MyKey Dist.

Press the OK button. Press the OK button.

Tracks the distance when drivers use a MyKey. The only way to delete the accumulated distance is by using an admin key to clear your MyKeys. If the distance does not accumulate as expected, then the intended user is not using the MyKey, or an admin key user recently cleared and then recreated a MyKey. Indicates the number of MyKeys programmed to your vehicle. Use this feature to detect how many MyKeys you have for your vehicle and determine when a MyKey has been deleted. Indicates how many admin keys are programmed to your vehicle. Use this feature to determine how many unrestricted keys you have for your vehicle, and detect if an additional MyKey has been programmed.

{0} MyKeys

{0} Admin Keys

57

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

MyKey™

USING MYKEY WITH REMOTE START SYSTEMS MyKey is not compatible with non MYKEY TROUBLESHOOTING

Ford-approved, aftermarket remote start systems. If you choose to install a remote start system, see an authorized dealer for a Ford-approved remote start system.

Condition I cannot create a MyKey.

Potential Causes

•

•

The key or transmitter used to start the vehicle does not have admin privileges. The key or transmitter used to start the vehicle is the only admin key (there always has to be at least one admin key).

• Vehicles with keyless start: The keyless

start transmitter is not placed in the backup position. See Starting a Gasoline Engine (page 147). SecuriLock passive anti-theft system is disabled or in unlimited mode.

•

I cannot program the configurable settings.

I cannot clear the MyKeys.

•

The key or transmitter used to start your vehicle does not have admin privileges. • No MyKeys are created. See Creating a

MyKey (page 55).

•

The key or transmitter used to start your vehicle does not have admin privileges. • No MyKeys are created. See Creating a

MyKey (page 55).

I lost the only admin key.

Purchase a new key from an authorized dealer.

58

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

MyKey™

Condition

Potential Causes

I lost a key.

MyKey distances do not accumulate.

No MyKey functions with the keyless entry transmitter.

Program a spare key. See Passive Anti-Theft System (page 68). • The MyKey user is not using the MyKey. • An admin key holder cleared the MyKeys

and created new MyKeys. The key system has been reset.

•

• An admin transmitter is present at vehicle

start.

• No MyKeys are created. See Creating a

MyKey (page 55).

59

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Locks

Remote Control You can use the remote control at any time. The luggage compartment release button will only work when the vehicle speed is less than 5 mph (8 km/h). Unlocking the Doors (Two-Stage Unlock)

Press the button to unlock the driver door. Press the button again within

three seconds to unlock all doors. The turn signals will flash. Press and hold both the lock and unlock buttons on the remote control for three seconds to change between driver door or all doors unlock mode. The turn signals will flash twice to indicate a change to the unlocking mode. Driver door unlock mode will only unlock the driver door when the unlock button is pressed once. All door unlock mode will unlock all doors with one press of the unlock button. The unlocking mode applies to the remote control, keyless entry keypad and intelligent access. You can also change the mode in the information display. See (page 96). Locking the Doors

Press the button to lock all the doors. The turn signals will illuminate.

Press the button again within three seconds to confirm that all the doors are closed. The doors will lock again, the horn will sound and the turn signals will illuminate if all the doors and the luggage compartment are closed.

LOCKING AND UNLOCKING You can use the power door lock control or the remote control to lock and unlock the vehicle. Power Door Locks The power door lock control is on the driver and front passenger door panels.

Unlock Lock

Door Lock Indicator An LED on each door window trim will light when you lock the door. It will remain lit for up to 10 minutes after you switch off the ignition. Switch Inhibitor When you electronically lock your vehicle, the power door lock switch will no longer operate after 20 seconds. You must unlock your vehicle with the remote control or keyless keypad, or switch the ignition on, to restore function to these switches. You can switch this feature on or off in the information display. See (page 96). Rear Door Unlocking and Opening Pull the interior door release handle twice to unlock and open the rear door. The first pull unlocks the door and the second pull will unlatch the door.

60

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E138628E138629E138623Locks

If the lock feature fails to operate, you can individually lock the doors using the remote control key blade in the position shown. See Remote Control (page 47). On the left-hand side, turn the key clockwise to lock. On the right-hand side, turn the key counterclockwise to lock.

Activating Intelligent Access (If Equipped) You must have the intelligent access key within 3 feet (1 meter) of your vehicle. At a Door Pull an exterior door handle to unlock and open the door. Make sure not to touch the lock sensor on top of the handle.

Touch the top of the door handle to lock your vehicle. There will be a brief delay before you can unlock your vehicle again. Note: Keep the door handle surface clean to avoid issues with operation.

Mislock If any door or the luggage compartment is open, or if the hood is open on vehicles with an anti-theft alarm or remote start, the horn will sound twice and the lamps will not flash. You can enable or disable this feature in the information display. See Information Displays (page 96). Opening the Luggage Compartment

Press twice within three seconds to open the luggage compartment.

Make sure to close and latch the luggage compartment before driving your vehicle. An unlatched luggage compartment may cause objects to fall out or block your view.

61

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E112203E138630E157085Locks

Smart Unlocks For Intelligent Access Keys (If Equipped) This feature helps to prevent you from unintentionally locking your intelligent access key inside your vehicle’s passenger compartment or rear cargo area. When you electronically lock your vehicle (with any door open, vehicle in park and ignition off), the vehicle will search for an intelligent access key in the passenger compartment after you close the last door. If your vehicle finds a key, all of the doors will immediately unlock and the horn will sound twice, indicating that a key is inside. You can override the smart unlock feature and intentionally lock the intelligent access key inside your vehicle. To do this, lock your vehicle after you have closed all the doors by: • •

using the keyless entry keypad pressing the lock button on another intelligent access key touching the locking area on the handle with another intelligent access key in your hand.

•

When you open one of the front doors and lock your vehicle using the power door lock control, all doors will lock then unlock if: • •

the ignition is on, or the ignition is off and your vehicle is not in P.

Auto Relock If you press the unlock button on the remote control and do not open a door within 45 seconds, your vehicle will lock and the alarm will arm. You can enable or disable this feature in the information display. See (page 96).

At the Luggage Compartment

Press the exterior release button hidden above the license plate. Smart Unlocks For Integrated Keyhead Transmitter This feature helps to prevent you from locking yourself out of your vehicle if your key is still in the ignition. When you open one of the front doors and lock the vehicle with the power door lock control, all the doors will lock then unlock and the horn will sound twice if your key is still in the ignition. You can still lock your vehicle with the key in the ignition. To do this, use the keyless entry keypad with the driver door closed, or press the lock button on the transmitter even if the doors are not closed. If both front doors are closed, you can lock your vehicle by any method, regardless of whether the key is in the ignition or not.

62

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E207425Locks

Illuminated Entry The interior lamps and select exterior lamps will illuminate when you unlock the doors with the remote entry system. The illuminated entry system will turn off the lights if: • •

the ignition is on, you press the remote control lock button, or after 25 seconds of illumination.

• The lights will not turn off if: •

you turn them on with the lamp control, or • any door is open. Illuminated Exit The interior lamps and select exterior lamps will illuminate when all doors are closed, you switch the ignition off and you remove the key from the ignition (integrated keyhead transmitter only). The lamps will turn off if all the doors remain closed and: • •

25 seconds elapse you insert the key in the ignition (integrated keyhead transmitter only) you press the START/STOP button (intelligent access key only).

•

Battery Saver If you leave the courtesy lamps, dome lamps or headlamps on, the battery saver will shut them off 10 minutes after you switch the ignition off. Accessory Mode Battery Saver for Intelligent Access Keys (If Equipped) If you leave your vehicle in the run ignition state, it will shut off once it detects a certain amount of battery drain or after 45
minutes.

Autolock Feature The autolock feature will lock all the doors when: • • •

all doors are closed, the ignition is on, you shift into any gear putting your vehicle in motion, and your vehicle attains a speed greater than 12 mph (20 km/h).

•

The autolock feature repeats when: •

you open then close any door while the ignition is on and your vehicle speed is 9 mph (15 km/h) or lower, and your vehicle then attains a speed greater than 12 mph (20 km/h).

•

Autounlock Feature The autounlock feature will unlock all the doors when: •

the ignition is on, all the doors are closed, and your vehicle has been in motion at a speed greater than 12 mph (20 km/h); your vehicle comes to a stop and you switch the ignition off or to accessory; and you open the driver door within 10
minutes of switching the ignition off or to accessory.

•

•

Note: The doors will not autounlock if you electronically lock your vehicle after you switch the ignition off and before you open the driver door. Enabling or Disabling Note: You can enable or disable the autolock and autounlock features independently of each other. You can enable or disable these features in the information display or your authorized dealer can do it for you. See (page 96).

63

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Locks

Luggage Compartment With the Remote Control

Note: If you enter your entry code too fast on the keypad, the unlock function may not work. Re-enter your entry code more slowly.

Press twice within three seconds to unlatch the trunk.

From Outside Your Vehicle

You can use the keypad to: lock or unlock the doors • release the trunk • recall memory seat and mirror • positions (if equipped) program and erase user codes arm and disarm the anti-theft alarm.

• • You can operate the keypad with the factory-set 5-digit entry code. The code is located on the owner’s wallet card in the glove box and is available from an authorized dealer. You can also create up to five of your own 5-digit personal entry codes. Programming a Personal Entry Code To create your own personal entry code: 1. Enter the factory-set code. 2. Press 1·2 on the keypad within five

seconds.

3. Enter your personal 5-digit code. You must enter each number within five seconds of each other.

64

Press the release button above the license plate to unlatch the trunk. Your vehicle must be unlocked or have an intelligent access transmitter within 3 feet (1 meter) of the trunk. KEYLESS ENTRY (If Equipped) SECURICODE™ KEYLESS ENTRY KEYPAD The keypad is located near the driver window. It is invisible until touched and then it lights up so you can see and touch the appropriate buttons.

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E138630E207425E138637Locks

All personal codes are now erased and only the factory-set 5–digit code will work. Anti-Scan Feature The keypad will go into an anti-scan mode if you enter the wrong code seven times (35 consecutive button presses). This mode disables the keypad for one minute and the keypad lamp will flash. The anti-scan feature will turn off after: • •

one minute of keypad inactivity pressing the unlock button on the remote control switching the ignition on unlocking your vehicle using intelligent access.

• •

Unlocking and Locking the Doors To Unlock the Driver Door Enter the factory-set 5-digit code or your personal code. You must press each number within five seconds of each other. The interior lamps will illuminate. Note: All doors will unlock if you enable the all-door unlocking mode. See Locking and Unlocking (page 60). To Unlock All Doors Enter the factory-set code or your personal code, then press 3·4 within five seconds. To Lock All Doors Press and hold 7·8 and 9·0 at the same time (with the driver door closed). You do not need to enter the keypad code first. To Release the Trunk Enter the factory-set code or your personal code, then press 5·6 within five seconds.

4. Press 1·2 on the keypad to save

personal code 1.

The doors will lock then unlock to confirm that programming was successful. To program additional personal entry codes, repeat Steps 1-3, then for Step 4: press 3·4 to save personal code 2
• press 5·6 to save personal code 3
• press 7·8 to save personal code 4
• press 9·0 to save personal code 5. • You may also program a personal entry code through the MyFord Touch system (if equipped). Tips: • Do not set a code that uses five of the

same number.

• Do not use five numbers in sequential

order. The factory-set code will work even if you have set your own personal code.

•

•

•

Recalling Memory Positions (If Equipped) The programmed entry codes will recall driver memory positions as follows: •

Entry code 1 will recall driver 1 memory positions. Entry code 2 will recall driver 2 memory positions. Entry code 3 will recall driver 3 memory positions.

Note: Personal entry codes 4 and 5 will not recall memory positions. Erasing a Personal Code 1. Enter the factory-set 5-digit code. 2. Press and release 1·2 on the keypad

within five seconds.

3. Press and hold 1·2 for two seconds. You must do this within five seconds of completing Step 2.

65

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Locks

3. Press the START/STOP button again

and remove the key. Insert the second programmed key into the backup slot, then press the START/STOP button.

4.

The factory-set code will appear in the information display for a few seconds. Note: The code may not display until after any other warning messages first display. INTERIOR LUGGAGE COMPARTMENT RELEASE

WARNINGS

Keep vehicle doors and luggage compartment locked and keep keys and remote transmitters out of a

child’s reach. Unsupervised children could lock themselves in the trunk and risk injury. Children should be taught not to play in vehicles.

Do not leave children or animals unattended in the vehicle. On hot days, the temperature in the trunk or

vehicle interior can rise very quickly. Exposure of people or animals to these high temperatures for even a short time can cause death or serious heat-related injuries, including brain damage. Small children are particularly at risk.

Your vehicle is equipped with a release handle that provides a means of escape for children and adults if they become locked inside the luggage compartment. Adults should familiarize themselves with the operation and location of the release handle.

Displaying the Factory Set Code With Integrated Keyhead Transmitters Note: You will need to have two programmed passive anti-theft keys for this procedure. To display the factory-set code in the information display: 1.

Insert a key into the ignition and switch the ignition on for a few seconds.

2. Switch the ignition off and remove the

key. Insert the second key into the ignition and switch the ignition on.

3.

The factory-set code will display for a few seconds. Note: The code may not display until after any other warning messages first display. With Intelligent Access Keys Note: You will need to have two programmed intelligent access keys for this procedure. To display the factory-set code in the information display:

1. Place the first programmed key in the backup slot inside the center console. The key ring must be at the top with the buttons facing toward the rear.

2. Press the START/STOP button once

and wait a few seconds.

66

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E147165Locks

The handle is located inside the luggage compartment either on the luggage compartment door (lid) or near the tail lamps. It is composed of a material that will glow for hours in darkness following brief exposure to ambient light. Pull the handle and push up on the luggage compartment door (lid) to open from within the luggage compartment.

67

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E144403Security

PASSIVE ANTI-THEFT SYSTEM Note: The system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection. Note: Metallic objects, electronic devices or a second coded key on the same key chain may cause vehicle starting problems if they are too close to the key when starting your vehicle. Prevent these objects from touching the coded key while starting your vehicle. Switch the ignition off, move all objects on the key chain away from the coded key and restart your vehicle if a problem occurs. Note: Do not leave a duplicate coded key in your vehicle. Always take your keys and lock all doors when leaving your vehicle. SecuriLock® The system helps prevent your vehicle from starting unless you use a coded key programmed to your vehicle. Using the wrong key may prevent your vehicle from starting. A message may appear in the information display. If you are unable to start your vehicle with a correctly coded key, a malfunction has happened. A message may appear in the information display. Automatic Arming Your vehicle arms immediately after switching the ignition off. Automatic Disarming Switching the ignition on with a coded key disarms your vehicle.

Replacement Keys Note: Your vehicle comes equipped with two integrated keyhead transmitters or two intelligent access keys. The integrated keyhead transmitter functions as a programmed ignition key that operates all the locks and starts your vehicle, as well as a remote control. The intelligent access key functions as a programmed key that operates the driver door lock and activates the intelligent access with push button start system, as well as a remote control. If your programmed transmitters or standard SecuriLock coded keys (integrated keyhead transmitters only) are lost or stolen and you do not have an extra coded key, you will need to have your vehicle towed to an authorized dealer. You need to erase the key codes from your vehicle and program new coded keys. Store an extra programmed key away from your vehicle in a safe place to help prevent any inconveniences. See your authorized dealer to purchase additional spare or replacement keys. Programming a Spare Integrated Keyhead Transmitter Note: You can program a maximum of eight coded keys to your vehicle. All eight can be integrated keyhead transmitters. You can program your own integrated keyhead transmitter or standard SecuriLock coded keys to your vehicle. This procedure will program both the vehicle immobilizer keycode and the remote entry portion of the remote control to your vehicle. Only use integrated keyhead transmitters or standard SecuriLock keys.

68

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Security

Programming a Spare Intelligent Access Key Note: You can program a maximum for four intelligent access keys to your vehicle. You must have two previously programmed intelligent access keys inside your vehicle and the new unprogrammed intelligent access keys readily accessible. See an authorized dealer to have the spare key programmed if two previously programmed keys are not available. Make sure that your vehicle is off before beginning this procedure. Make sure that you close all the doors before beginning and that they remain closed throughout the procedure. Perform all steps within 30
seconds of starting the sequence. Stop and wait for at least one minute before starting again if you perform any steps out of sequence. Read and understand the entire procedure before you begin.

1. Place a programmed intelligent access

key in the backup slot in the center console. The key ring must be at the top with the buttons facing toward the rear.

2. Wait 5 seconds, and then press the

START/STOP button.

3. Remove the intelligent access key.

You must have two previously programmed coded keys and the new unprogrammed key readily accessible. See an authorized dealer to have the spare key programmed if two previously programmed coded keys are not available. Read and understand the entire procedure before you begin. 1.

Insert the first previously programmed coded key into the ignition.

2. Switch the ignition from off to on. Keep

the ignition on for at least three seconds, but no more than 10 seconds. 3. Switch the ignition off and remove the

first coded key from the ignition. 4. After three seconds but within 10

seconds of switching the ignition off, insert the second previously coded key into the ignition.

5. Switch the ignition from off to on. Keep

the ignition on for at least three seconds, but no more than 10 seconds. 6. Switch the ignition off and remove the second previously programmed coded key from the ignition.

7. After three seconds but within 10

seconds of switching the ignition off and removing the previously programmed coded key, insert the new unprogrammed key into the ignition.

8. Switch the ignition from off to on. Keep the ignition on for at least six seconds. 9. Remove the newly programmed coded

key from the ignition.

If the key has been successfully programmed it will start your vehicle and operate the remote entry system (if the new key is an integrated keyhead transmitter). If programming was not successful, wait 10 seconds and repeat Steps 1 through 8. If you are still unsuccessful, take your vehicle to an authorized dealer.

69

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E147165Security

• Unlock the doors or luggage

compartment with the remote control or keyless entry keypad. Switch your vehicle on or start your vehicle.

•

• Use a key in the driver door to unlock your vehicle, then switch your vehicle on within 12 seconds.

Note: Pressing the panic button on the remote control will stop the horn and signal indicators, but will not disarm the system.

4. Within 10 seconds, place a second

programmed intelligent access key in the backup slot and press the START/STOP button.

5. Wait 5 seconds, and then press the

START/STOP button again.

6. Remove the intelligent access key. 7. Wait 5 seconds, then place the

unprogrammed intelligent access key in the backup slot and press the START/STOP button.

Programming is now complete. Verify the remote control functions operate and your vehicle starts with the new intelligent access key. If programming was not successful, wait 10 seconds and repeat Steps 1 through 7. If you are still unsuccessful, take your vehicle to your authorized dealer. ANTI-THEFT ALARM The system will warn you of an unauthorized entry to your vehicle. It will be triggered if any door, the luggage compartment or the hood is opened without using the key, remote control or keyless entry keypad. The direction indicators will flash and the horn will sound if unauthorized entry is attempted while the alarm is armed. Take all remote controls to an authorized dealer if there is any potential alarm problem with your vehicle. Arming the Alarm The alarm is ready to arm when there is not a key in your vehicle. Electronically lock your vehicle to arm the alarm. Disarming the Alarm Disarm the alarm by any of the following actions:

70

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Steering Wheel

Operate the following functions with the control:

ADJUSTING THE STEERING WHEEL

WARNING

Do not adjust the steering wheel when your vehicle is moving.

Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position (page 130).

Volume up. Volume down. Mute. Media. Seek down or previous. Seek up or next.

1. Unlock the steering column. 2. Adjust the steering wheel to the desired

position.

MEDIA Press repeatedly to scroll through available audio sources. Seek, Next or Previous Press the seek button to: •

tune the radio to the next or previous stored preset. play the next or the previous track.

• Press and hold the seek button to: •

tune the radio to the next station up or down the frequency band. seek through a track.

3. Lock the steering column. AUDIO CONTROL (If Equipped) Select the required source on the audio unit.

•

71

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

221E157083E157084E168191Steering Wheel

VOICE CONTROL (If Equipped)

Type 2

Press the button to select or deselect voice control. See SYNC™ (page 341). CRUISE CONTROL Type 1

See Cruise Control (page 188). INFORMATION DISPLAY CONTROL

See Information Displays (page 96).

72

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E168194E197198E197202E144636Steering Wheel

Information Display Control Features

This control functions the same as the center control on the faceplate. See General Information (page 327). Use this control to adjust the right side of the information display. Navigate through the screen and press OK to select. HEATED STEERING WHEEL (If Equipped) See MyFord Touch™ (page 386).

73

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E144811Wipers and Washers

WINDSHIELD WIPERS Note: Fully defrost the windshield before you switch the windshield wipers on. Note: Make sure you switch the windshield wipers off before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears. If that does not resolve the issue, install new wiper blades. Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage the wiper blades or cause the wiper motor to burn out. Always use the windshield washers before wiping a dry windshield.

Single wipe Intermittent wipe Normal wipe High speed wipe

Intermittent Wipe

Shortest wipe interval Intermittent wipe Longest wipe interval

Use the rotary control to adjust the intermittent wipe interval. Speed Dependent Wipers When your vehicle speed increases, the interval between wipes decreases. AUTOWIPERS (If Equipped) Note: Fully defrost the windshield before switching on the windshield wipers. Note: Make sure you switch off the windshield wipers before entering a car wash. Note: Clean the windshield and wiper blades if they begin to leave streaks or smears. If that does not resolve the issue, install new wiper blades. Note: If you switch autolamps on in conjunction with autowipers, your low beam headlamps will illuminate automatically when the rain sensor activates the windshield wipers continuously.

74

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

DCBE169313ACBAE169314Wipers and Washers

Use the rotary control to adjust the sensitivity of the rain sensor. Set the control to low sensitivity, and the wipers will turn on when the rain sensor detects a large amount of moisture on the windshield. Set the control to high sensitivity, and the wipers will turn on when the rain sensor detects a small amount of moisture on the windshield. Note: When you set the wiper system to intermittent wipe and the autowiper system is on, the autowiper sensitivity setting adjusts the wiper speed according to the moisture on the windshield only. Use the wiper lever to wipe the windshield on-demand. Keep the outside of the windshield clean. The rain sensor is very sensitive. If the area around the mirror is dirty, then the wipers may operate if dirt, mist or insects hit the windshield. WINDSHIELD WASHERS Note: Do not operate the washers when the washer reservoir is empty. This may cause the washer pump to overheat.

To operate the washers and spray the windshield, pull the lever toward you.

Note: Wet or winter driving conditions with ice, snow or salty road mist can cause inconsistent and unexpected wiping or smearing. In these conditions, you can do the following to help keep your windshield clear: •

Lower the sensitivity of the autowipers to reduce the amount of smearing. Switch to normal or high-speed wipe. Switch the autowipers off.

• •

Highest sensitivity On Lowest sensitivity

The autowipers feature uses a rain sensor. You will find it in the area around the interior mirror. The rain sensor monitors the amount of moisture on the windshield and automatically turns on the wipers. It will adjust the wiper speed by the amount of moisture that the sensor detects on the windshield. Note: This autowiper feature is automatically set to on and remains on until you switch it off in the information display. You can also switch the feature back on at any time. See (page 96).

75

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

ACBE169315E169316Wipers and Washers

A wipe will occur a few seconds after washing to clear any remaining washer fluid. This feature can be switched on or off in the information display. See General Information (page 96).

76

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Lighting

GENERAL INFORMATION Condensation in Lamp Assemblies Exterior lamps have vents to accommodate normal changes in air pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold. When normal condensation occurs, a fine mist can form on the interior of the lens. The fine mist eventually clears and exits through the vents during normal operation. Clearing time may take as long as 48 hours under dry weather conditions. Examples of acceptable condensation are: • The presence of a fine mist (no streaks, drip marks or large droplets).

• A fine mist covers less than 50% of the

lens.

Examples of unacceptable condensation are: • A water puddle inside the lamp. •

Streaks, drip marks or large droplets present on the interior of the lens.

If you see any unacceptable condensation, have your vehicle checked by an authorized dealer.

LIGHTING CONTROL

Off Parking lamps, instrument panel lamps, license plate lamps and tail lamps Headlamps

High Beams

Push the lever forward to switch the high beams on. Push the lever forward again or pull the lever toward you to switch the high beams off.

77

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E142449E162679Lighting

If equipped, the following also activate when the lighting control is in the autolamps position and you switch them on in the information display: • Configurable daytime running lamps. • Automatic high beam control. • Adaptive headlamp control. The headlamps remain on for a period of time after you switch the ignition off. Use the information display controls to adjust the period of time that the headlamps remain on. See Information Displays (page 96). Note: With the headlamps in the autolamps position, you cannot switch the high beam headlamps on until the autolamps system turns the low beam headlamps on. Windshield Wiper Activated Headlamps The windshield wiper activated headlamps turn on within 10 seconds when you switch the windshield wipers on and the lighting control is in the autolamps position. They turn off approximately 60 seconds after you switch the windshield wipers off. The headlamps will not turn on by wiper activation: • During a mist wipe. • When the wipers are on to clear washer

fluid during a wash condition. If the wipers are in intermittent mode.

• Note: If you switch autolamps and autowipers on, the headlamps will automatically turn on when the windshield wipers continuously operate.

Headlamp Flasher

Pull the lever toward you slightly and release it to flash the headlamps. AUTOLAMPS (If Equipped)

WARNING

The autolamps switch position may not activate the headlamps in all low visibility conditions, such as daytime

fog. Always ensure that your headlamps are switched to auto or on, as appropriate, during all low visibility conditions. Failure to do so may result in a collision.

When the lighting control is in the autolamps position, the headlamps automatically turn on in low light situations or when the wipers activate.

78

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E162680E142451Lighting

Vehicles Without Front Fog Lamps

INSTRUMENT LIGHTING DIMMER Note: If you disconnect the battery or it becomes discharged, the illuminated components will switch to the maximum setting. Vehicles With Front Fog Lamps

Press repeatedly or press and hold until you reach the desired level.

Press repeatedly or press and hold to dim. Press repeatedly or press and hold to brighten.

HEADLAMP EXIT DELAY After you switch the ignition off, you can switch the headlamps on by pulling the direction indicator lever toward you. You will hear a short tone. The headlamps will switch off automatically after three minutes with any door open or 30 seconds after the last door has been closed. You can cancel this feature by pulling the direction indicator toward you again or switching the ignition on.

79

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

E132712ABE165366Lighting

3. The transmission is not in park (P) for vehicles with automatic transmissions or the parking brake is released for vehicles with manual transmissions.

4. The lighting control is in the autolamps

position.

5. The headlamps are off. The other lighting control switch positions do not activate the daytime running lamps, and you can use them to temporarily override autolamp control. When switched off in the information display, the daytime running lamps are off in all lighting control switch positions. AUTOMATIC HIGH BEAM CONTROL (If Equipped) The system will automatically turn on your high beams if it is dark enough and no other traffic is present. When it detects the headlights of an approaching vehicle, the tail lamps of the preceding vehicle or street lighting, the system will turn off the high beams before they distract other drivers. The low beams remain on. Note: If it appears that automatic control of the high beams is not functioning properly, check the windshield in front of the camera for a blockage. A clear view of the road is required for proper system operation. Have any windshield damage in the area of the camera’s field-of-view repaired. Note: If the system detects a blockage, for example bird droppings, bug splatter, snow or ice, the system will go into low beam mode until you clear the blockage. A message may also appear in the instrument cluster display noting the front camera is blocked.

DAYTIME RUNNING LAMPS (If Equipped)

WARNING

The daytime running lamps system does not activate the rear lamps and may not provide adequate lighting

during low visibility driving conditions. Also, the autolamps switch position may not activate the headlamps in all low visibility conditions, such as daytime fog. Make sure the headlamps are switched to auto or on, as appropriate, during all low visibility conditions. Failure to do so may result in a crash. Type 1 - Conventional (Non- Configurable) The daytime running lamps turn on when: 1. The ignition is switched to the on

position.

2. The transmission is not in park (P) for vehicles with automatic transmissions or the parking brake is released for vehicles with manual transmissions.

3. The lighting control is in the off, parking

lamp or autolamps positions.

4. The headlamps are off. Type 2 - Configurable Switch the daytime running lamps on or off using the information display controls. See Information Displays (page 96). The daytime running lamps turn on when: 1. They are switched on in the information

display. See Information Displays (page 96).

2. The ignition is switched to the on

position.

80

Fusion/Mondeo (CC7) Canada/United States of America, enUSA, First Printing

Lighting

Note: Typical road dust, dirt and water spots will not affect the performance of the automatic high beam system . However, in cold or inclement weather conditions, you will notice a decrease in the availability of the high beam system, especially at start up. If you want to change the beam state