2013 Ford Fusion Owners Manual

you perform a Master Reset to erase all stored information.

Times are subject to change due to holidays. SYNC Owner Account Why do I need a SYNC owner account? • Required to activate Vehicle Health

Report and to view the reports online.

• Required to activate the

subscription-based SYNC Services and to personalize your Saved Points and Favorites. Essential for keeping up with the latest software downloads available for SYNC.

•

• Access to customer support for any

questions you may have.

Driving Restrictions For your safety, certain features are speed-dependent and restricted when your vehicle is traveling over 3 mph (5 km/h). Safety Information

WARNING

Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.

306

Fusion/Mondeo (CC7)

SYNC™

System data cannot be accessed without special equipment and access to the vehicle's SYNC module. Ford Motor Company and Ford of Canada will not access the system data for any purpose other than as described absent consent, a court order, or where required by law enforcement, other government authorities, or other third parties acting with lawful authority. Other parties may seek to access the information independently of Ford Motor Company and Ford of Canada. For further privacy information, see the sections on 911 Assist, Vehicle Health Report, and Traffic, Directions and Information.

USING VOICE RECOGNITION This system helps you control many features using voice commands. This allows you to keep your hands on the wheel and focus on what is in front of you. Initiating a Voice Session

Push the voice icon. A tone sounds and Listening appears in the display. Say any of the

following:

Say

"Bluetooth audio" "Cancel" "Line in"

"Mobile apps" * "Phone"

"Services" * "SYNC" "USB"

"Vehicle health report" * "Voice settings" "Help"

If You Want To

Stream audio from your phone. Cancel the requested action. Access the device connected to the auxiliary input jack. Access mobile applications.

Make calls. Access the SYNC Services portal.

Return to the main menu. Access the device connected to your USB port. Run a vehicle health report.

Adjust the level of voice interaction and feedback. Hear a list of voice commands available in the current mode.

* This is an optional feature and available in the United States only.

307

Fusion/Mondeo (CC7)

E142599SYNC™

System Interaction and Feedback The system provides feedback through audible tones, prompts, questions and spoken confirmations depending on the situation and the chosen level of interaction (voice settings). You can customize the voice recognition system to provide more or less instruction and feedback.

The default setting is to a higher level of interaction in order to help you learn to use the system. You can change these settings at any time. Adjusting the Interaction Level

Push the voice icon. Say "Voice settings" when prompted, then any of the following:

When you say:

"Interaction mode standard"

"Interaction mode advanced"

The system:

Provides more detailed interaction and

guidance.

Provides less audible interaction and more

tone prompts.

The system defaults to the standard interaction mode.

Confirmation prompts are short questions the system asks when it is not sure of your request or when there are multiple possible responses to your request. For example, the system may ask "Phone, is that correct?". If turned off, the system simply makes a best guess as to what you requested and may ask you to confirm settings.

When you say:

"Confirmation prompts off"

"Confirmation prompts on"

The system creates candidate lists when it has the same confidence level of several options based on your voice command. When turned on, it may prompt you with as many as four possibilities for clarification.

The system:

Makes a best guess from the command; you may still occasionally be asked to

confirm settings.

Clarifies your voice command with a short

question.

For example, say "Say 1 after the tone to call John Doe at home. Say 2 after the tone to call Johnny Doe on mobile. Say 3 after the tone to call Jane Doe at home." You could also say "Say 1 after the tone to play John Doe, Say 2 after the tone to play Johnny Doe."

308

Fusion/Mondeo (CC7)

E142599When you say:

"Media candidate lists off"

"Media candidate lists on"

"Phone candidate lists off"

SYNC™

The system:

Makes a best guess from the media

candidate list. You may still occasionally

be asked questions.

Clarifies your voice command for media

candidates.

Makes a best guess from the phone

candidate list. You may still occasionally

be asked questions.

"Phone candidate lists on"

Clarifies your voice command for phone

candidates

Ending a call.

USING SYNC™ WITH YOUR PHONE Hands-free calling is one of the main features of SYNC. While the system supports a variety of features, many are dependent on your cellular phone's functionality. At a minimum, most cellular phones with Bluetooth wireless technology support the following functions: • Answering an incoming call. • • Using privacy mode. • Dialing a number. • Redialing. • Call waiting notification. • Caller ID. Other features, such as text messaging using Bluetooth and automatic phonebook download, are phone-dependent features. To check your phone's compatibility, see your phone's manual and visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca.

Helpful Hints • Make sure the interior of your vehicle is as quiet as possible. Wind noise from open windows and road vibrations may prevent the system from correctly recognizing spoken commands.

• After pressing the voice icon, wait until

after the tone sounds and Listening appears before saying a command. Any command spoken before this does not register with the system. Speak naturally, without long pauses between words.

•

• At any time, you can interrupt the

system while it is speaking by pressing the voice icon.

309

Fusion/Mondeo (CC7)

SYNC™

Pairing a Phone for the First Time Note: SYNC can support downloading up to approximately 2000 entries per Bluetooth-enabled cellular phone. Note: Make sure to switch on the ignition and the radio. Put the transmission in position P (automatic transmission) or neutral with the parking brake applied (manual transmission). Note: To scroll through the menus, press the up and down arrows on your audio system. Wirelessly pairing your phone with SYNC allows you to make and receive hands-free calls. 1. Press the phone button. When the display indicates there is no phone paired, press OK.

2. When Find SYNC appears in the

display, press OK.

3. Put your phone into Bluetooth

discovery mode. See your device's manual if necessary.

4. When prompted on your phone's

display, enter the six-digit PIN provided by SYNC in the radio display. The display indicates when the pairing is successful.

Depending on your phone's capability and your market, the system may prompt you with questions, such as setting the current phone as the primary phone (the phone SYNC automatically tries to connect with first upon vehicle start-up) and downloading your phonebook.

OK.

Pairing Subsequent Phones Note: Make sure to switch on the ignition and the radio. Put the transmission in position P (automatic transmission) or neutral with the parking brake applied (manual transmission). Note: To scroll through the menus, press the up and down arrows on your audio system. 1. Press the phone button, and then scroll

to System Settings. Press OK.

2. Scroll to Bluetooth Devices. Press OK. 3. Scroll to Add Bluetooth Device. Press

4. When Find SYNC appears in the

display, press OK.

5. Put your phone into Bluetooth

discovery mode. See your phone's manual if necessary.

6. When prompted on your phone's

display, enter the six-digit PIN provided by SYNC in the radio display. The display indicates when the pairing is successful.

The system then prompts with questions, such as if you would like to set the current phone as the primary phone (the phone SYNC automatically tries to connect with first upon vehicle start-up) or download your phone book. Phone Voice Commands Press the voice icon and say "Phone". Say any of the following:

"Call "1

"Call at home"1

"Call at work"1

"PHONE"

310

"Go to privacy"

"Hold"

"Join"

Fusion/Mondeo (CC7)

SYNC™

"PHONE"

"Call in office"1

"Menu"2,4

"Call on mobile OR cell"1

"Phone book "2

"Call on other"1

"Call history incoming"2

"Call history missed"2

"Phone book at home"2

"Phone book at office"2

"Phone book at work"2

"Call history outgoing"2

"Phone book on mobile OR cell"2

"Connections"2

"Dial"1,3

"Phone book on other"2

1 These commands do not require you to say "Phone" first. 2 These commands are not available until phone information is completely downloaded using Bluetooth. 3 See Dial table below. 4 See Menu table below.

Phone book commands: When you ask SYNC to access things such as a phonebook name or number, the requested information appears in the display to view. Press the phone button and say, "Call" to call the contact.

"DIAL"

"411 (four-one-one)", "911" (nine-one-one)

"700" (seven hundred) "800" (eight hundred) "900" (nine hundred)

"Pound" (#)

"Number <0-9>"

"Asterisk" (*)

311

Fusion/Mondeo (CC7)

SYNC™

"DIAL"

"Clear" (deletes all entered digits)

"Delete" (deletes one digit)

"Plus" "Star"

Note: To exit dial mode, press and hold the phone button or press MENU to go to the phone menu.

"MENU"

"(Phone) connections"

"(Phone) settings (message) notification off" "(Phone) settings (message) notification on"

"(Phone) settings (set) phone ringer"

"(Phone) settings (set) ringer 1" "(Phone) settings (set) ringer 2" "(Phone) settings (set) ringer 3" "(Phone) settings (set) ringer off"

"Battery"

"Phone name"

"Signal"

"Text message inbox"

Words in ( ) are optional and do not have to be spoken for the system to understand the command.

To erase the last spoken digit, say, "Delete" or press the left arrow button. To erase all spoken digits, say "Clear" or press and hold the left arrow button. To end the call, press and hold the phone button.

Making Calls Press the voice icon and when prompted say: 1. Say "Call " or "Dial", then the

desired number.

2. When the system confirms the number,

say, "Dial" again to initiate the call.

312

Fusion/Mondeo (CC7)

SYNC™

Receiving Calls When receiving a call, you can: • Answer the call by pressing the phone

button.

• Reject the call by pressing and holding

the phone button. Ignore the call by doing nothing.

•

Phone Options during an Active Call During an active call, you have more menu features, which become available such as putting a call on hold or joining calls. Use the arrow buttons to scroll through the menu options. 1. Press MENU during an active call. 2. After selecting Active Call Menu, press

OK.

3. Scroll to cycle through the following

options:

When you select:

You can:

Mute Call? Privacy

Call Hold

Enter Tones

Join Calls

Phonebook

Fusion/Mondeo (CC7)

Mute the call. Switch a call from an active hands-free environment to your cellular phone for a more private conversation. Press OK when Privacy on/off appears. (The display indicates In Privacy and the system transfers your call.) Put an active call on hold. Press OK when Hold on/off appears. To answer another call at this time, press the phone button. Enter "tones", such as numbers for passwords. Scroll until the desired number appears in the display, then press OK; a tone sounds as confirmation. Repeat as necessary. Join two separate calls. (SYNC supports a maximum of three callers on a multiparty call or conference call.) 1. Press the phone button. 2. Access the desired contact through SYNC or use voice commands to place the second call. Once actively in the second call, press MENU. 3. Scroll to Join Calls, and press OK. Press OK again when Join Calls? appears. Access your phonebook contacts. 1. Press OK to select, and then scroll through your phone- book contacts. 2. Press OK again when the desired selection appears in the display.

313

SYNC™

When you select:

You can:

Call History

Return

3. Press the phone button. Access your call history log. 1. Press OK to select, then scroll through your call history options (incoming, outgoing or missed). 2. Press OK when the desired selection appears in the display. 3. Press the phone button to call the selection. Exit the current menu.

1. Press the phone button to enter the

phone menu.

2. Scroll to cycle through:

Accessing Features through the Phone Menu SYNC's phone menu allows you to redial a number, access your call history and phonebook and sends text messages as well as access phone and system settings. You can also access advanced features, such as 911 Assist, Vehicle Health Report and SYNC Services.

When you select:

You can:

Phone Redial

Call History1

Phonebook1,2

Fusion/Mondeo (CC7)

Redial the last number called (if available). Press OK to select, and then press OK again to confirm. Access any previously dialed, received or missed calls after you connect your Bluetooth-enabled phone to SYNC. 1. Press OK to select. 2. Scroll to select from Call History Incoming, Call History Outgoing or Call History Missed. Press OK to make your selection. 3. Press OK or the phone button to call the desired selec- tion. Note: The system attempts to automatically re-download your phonebook and call history each time your phone connects to SYNC (if the auto download feature is on and your Bluetooth-enabled cellular phone supports this feature). Access and call any contacts in your previously down- loaded phonebook.

314

SYNC™

When you select:

You can:

Text Message1

Phone Settings 1

SYNC Services3

911 Assist4

Vehicle Health Report3

Mobile Apps3

System Settings

1. Press OK to confirm and enter. If your phonebook has fewer than 255 listings, they appear alphabetically in flat file mode. If there are more than 255 entries, the system organizes them into alphabetical categories. 2. Scroll until the desired contact appears, then press OK. 3. Press OK or the phone button. Send, download and delete text messages.

View your phone's status, set ring tones, select your message notification, change phone book entries and automatically download your cellular phone among other features. Access the SYNC Services portal where you can request various types of information, traffic reports and directions. Place an emergency call to a 911 operator for you after an accident, when used properly. Create and receive a diagnostic report card on your vehicle.

Interact with SYNC-capable mobile applications on your smartphone. Access Bluetooth Devices menu listings (Add, Connect, Set as Primary, On and Off, Delete) as well as Advanced menu listings (prompts, languages, defaults, master reset, install application and system information). Exit the phone menu by pressing OK.

Exit Phone Menu 1 This is a phone-dependent feature. 2 This is a phone-dependent and speed-dependent feature. 3 This is an optional feature and available in the United States only. 4 This is an optional feature and available in the United States and Canada only.

Receiving a Text Message Note: This is a phone-dependent feature. Your phone must support downloading text messages using Bluetooth to receive incoming text messages.

Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages. The system can also read incoming text messages to you so that you do not have to take your eyes off the road.

315

Fusion/Mondeo (CC7)

SYNC™

Scroll to select from the following options: • Send Text Message? allows you to send a new text message based on a pre-defined set of 15 messages.

• Download Unread Msgs allows you to download your unread messages (only) to SYNC. To download the messages, press OK to select. The display indicates that it is downloading your messages. When it is complete, SYNC takes you to your inbox.

• Delete All Messages? allows you to delete current text messages from SYNC (not your phone). To delete the messages, press OK to select. The display indicates when it is finished deleting all your text messages. SYNC returns you to the text message menu. • Return exits the current menu when

you press OK.

If you select Send Text Message?: 1. Press OK to select. If the system

detects your phone does not support this feature, Unsupported appears in the display and SYNC returns to the main menu.

2. Scroll to cycle through the message

options in the following chart.

3. Press OK when the desired selection

is in the display.

4. Enter the name of the recipient. Scroll

to cycle through Phonebook or Call History entries. You can also select Enter Number to say the desired number.

5. Press OK to enter the desired menu

and scroll to select the specific contact.

When a new message arrives, an audible tone sounds and the display indicates you have a new message. You have these options: • Press the voice button, wait for the prompt and say "Read message" to have SYNC read the message to you. • Press OK to receive and open the text message or do nothing and the message goes into your text message inbox. Press OK again and SYNC reads your message aloud as you are not able to view the message. You can then also choose to reply or forward the message.

• Press OK and scroll to choose

between: • Reply to Text Message: Press OK to access and then scroll through the list of pre-defined messages to send. Forward Text Message: Press OK to forward the message to anyone in your Phonebook or Call History. You can also choose Enter Number.

•

Sending, Downloading and Deleting Your Text Messages Note: Forwarding a text message is a speed-dependent feature and is only available done when your vehicle is traveling at 3 mph (5 km/h) or less. Note: You can only have one recipient per text message. Text messaging is a phone-dependent feature. If your phone is compatible, SYNC allows you to receive, send, download and delete text messages. 1. Press the phone button. 2. Scroll to Text Message, and then press

OK.

316

Fusion/Mondeo (CC7)

SYNC™

6. Press OK when the contact appears and press OK again to confirm when the system asks if you would like to send the message. The system sends

each text message with the following signature: "This message was sent from my ".

Pre-defined text message options

Can't talk right now

Call me

Call U later

Be there in 10 minutes Be there in 20 minutes

Yes No Why? Thanks

Where R you?

I need more directions

I love you Too funny

Can't wait to see you

I'm stuck in traffic

Accessing Your Phone Settings These are phone-dependent features. Your phone settings allow you to access and adjust features such as your ring tone, text message notification, modify your phonebook and set up automatic download.

1. Press the phone button. 2. Scroll to Phone Settings, and then

press OK.

3. Scroll to select from the following

options:

When you select:

Phone Status

You can:

See the provider, name, signal power, battery power and roaming status of your connected phone.

317

Fusion/Mondeo (CC7)

SYNC™

When you select:

You can:

Set Ringer

Message Notification

Modify Phonebook

Auto Download

Press OK to select and scroll to view the information. When done, press OK again to return to the phone status menu. Select which ring tone sounds during an incoming call (one of the system's or your phone's). 1. Press OK to select and scroll to hear Ringer 1, Ringer 2, Ringer 3 and Phone Ringer. 2. Press OK to select. If your phone supports in-band ringing, your phone's ring tone plays when you choose Phone Ringer. Have the option of hearing an audible tone to notify you when a text message arrives. 1. Press OK to select and scroll between Message Notific- ation On and Message Notification Off. 2. Press OK to select. Modify the contents of your phonebook (such as add, delete or download). Press OK to choose between: Add Contacts: Press OK to add more contacts from your phone book. Push the desired contact(s) on your phone. See your phone's manual on how to push contacts. Delete Phonebook: Press OK to delete the current phone book and call history. When Delete Phonebook appears, press OK to confirm. SYNC takes you back to the Phone Settings menu. Download Phonebook: Press OK to select, then and press OK again when Confirm Download? appears. Automatically download your phone book each time your phone connects to SYNC.* Press OK to select. When Auto Download On? appears, press OK to have your phonebook automatically down- loaded each time.**

318

Fusion/Mondeo (CC7)

SYNC™

When you select:

You can:

Select Off if you do not want to download your phonebook every time your phone connects to SYNC. Your phonebook, call history and text messages can only be accessed when your specific phone is connected to SYNC. Exit the current menu.

Return *Downloading times are phone-dependent and quantity-dependent. **When Auto Download is on, it automatically deletes any changes, additions or deletions saved since your last download.

System Settings This menu provides access to your Bluetooth Devices and Advanced menu features. Use the arrow buttons to scroll through the menu options. Bluetooth Devices The Bluetooth Devices menu allows you to add, connect and delete devices, set a phone as primary as well as turn your Bluetooth feature on and off.

1. Press the phone button to enter the

phone menu

2. Scroll to System Settings. Press OK. 3. Scroll to Bluetooth Devices. Press OK. 4. Scroll to select from the following

options:

If you select:

Add Bluetooth Device* Connect Bluetooth Device

Set as Primary Phone

Set Bluetooth

Fusion/Mondeo (CC7)

See Using SYNC™ With Your Phone (page 309).

You can:

Connect a previously paired Bluetooth-enabled phone.** 1. Press OK to select and view a list of previously paired phones. 2. Scroll until you find the desired device, and then press OK to connect the phone. Set a previously paired phone as your primary phone. Press OK to select and scroll to select the desired phone. Press OK to confirm. SYNC attempts to connect with the primary phone at every ignition cycle. When you select a phone as a primary phone, it appears first in the list and the system marks it with an asterisk. Turn the Bluetooth feature on and off.

319

SYNC™

If you select:

You can:

Delete Device

Delete All Devices

Press OK and scroll to toggle between On and Off. Make a selection, and then press OK. Setting Bluetooth to off disconnects all Bluetooth devices and turns off all Bluetooth features. Delete a paired phone. Press OK and scroll to select the device. Press OK to confirm. Delete all previously paired phones (and all information originally saved with those phones). Press OK to select. Exit the current menu.

Return * This is a speed-dependent feature. **You can only connect one device at a time. When another phone is connected, the previous one is disconnected.

Advanced The Advanced menu allows you to access and set prompts, languages, defaults, perform a master reset, install an application and view system information.

1. Press the phone button to enter the

phone menu

2. Scroll to System Settings. Press OK. 3. Scroll to Advanced. Press OK. 4. Scroll to select from the following

options:

If you select:

Prompts

Languages

You can:

Get help from SYNC by using questions, helpful hints or asking you for a specific action. To turn these prompts on or off: 1. Press OK to select and scroll to select between On and Off. 2. Press OK when the desired selection appears in the display. SYNC takes you back to the Advanced menu. Choose between English, Français and Español. Once selected, all of the radio displays and prompts are in the selected language. 1. Press OK to select and then scroll through the languages.

320

Fusion/Mondeo (CC7)

SYNC™

If you select:

You can:

2. Press OK when the desired selection appears in the display. If you change the language setting, the display indicates that the system is updating. When complete, SYNC takes you back to the Advanced menu. Return to the factory default settings. This selection does not erase your indexed information (phonebook, call history, text messages and paired devices). 1. Press OK to select and then press OK again when Restore Defaults? appears in the display. 2. Press OK to confirm. Completely erase all information stored on SYNC (phonebook, call history, text messages and paired devices) and return to the factory default settings. Press OK to select. The display indicates when complete and SYNC takes you back to the Advanced menu. Install applications you have downloaded. Press OK and scroll to select. Press OK to confirm. Delete all previously paired phones (and all information originally saved with those phones). Press OK to select. Access the Auto Version number as well as the FDN number. Press OK to select. This is a Bluetooth component, which can further help your phone with the exchange of text messages. Exit the current menu.

Factory Defaults

Master Reset

Install Application?

Delete All Devices

System Info

MAP Profile

Return

321

Fusion/Mondeo (CC7)

SYNC™

WARNINGS

Always place your phone in a secure location in your vehicle so it does not become a projectile or get damaged

in a crash. Failure to do so may cause serious injury to someone or damage the phone which could prevent 911 Assist from working properly.

Note: The SYNC 911 Assist feature must be set on before the incident. Note: Before setting this feature on, make sure that you read the 911 Assist Privacy Notice later in this section for important information. Note: If any user turns 911 Assist on or off, that setting applies for all paired phones. If 911 Assist is turned off, either a voice message plays or a display message (or icon) comes on (or both) when your vehicle is started after a previously paired phone connects. Note: Every phone operates differently. While SYNC 911 Assist works with most cellular phones, some may have trouble using this feature. If a crash deploys an airbag (excluding knee airbags and rear inflatable safety belts [if equipped]) or activates the fuel pump shut-off, your SYNC-equipped vehicle may be able to contact emergency services by dialing 911 through a paired and connected Bluetooth-enabled phone. You can learn more about the 911 Assist feature, visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. Important information about airbag deployment is in this chapter. See Roadside Emergencies (page 227). Important information about the fuel pump shut-off is in this chapter.

SYNC™ APPLICATIONS AND SERVICES (IF EQUIPPED) In order for the following features to work, your cellular phone must be compatible with SYNC. To check your phone's compatibility, visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. •

SYNC Services*: Provides access to traffic, directions and information such as travel, horoscopes, stock prices and more. 911 Assist: Can alert 911 in the event of an emergency.

•

• Vehicle Health Report*: Provides a diagnostic and maintenance report card of your vehicle.

*This is an optional feature and available in the United States only. 911 Assist

WARNINGS

Unless the 911 Assist setting is set on before a crash, the system will not dial for help which could delay

response time, potentially increasing the risk of serious injury or death after a crash. Do not wait for 911 Assist to make an emergency call if you can do it yourself. Dial emergency services immediately to avoid delayed response time which could increase the risk of serious injury or death after a crash. If you do not hear 911 Assist within five seconds of the crash, the system or phone may be damaged or non-functional.

322

Fusion/Mondeo (CC7)

SYNC™

Setting 911 Assist On 1. Press the phone button to enter the

phone menu.

2. Scroll to select 911 Assist. 3. Press OK to confirm and enter the 911

Assist menu.

4. Scroll to select between On and Off. 5. Press OK when the desired option appears in the radio display. Set On or Set Off appears in the display as confirmation.

Off selections include: • Off with reminder: Provides a display

and voice reminder at phone connection at vehicle start.

• Off without reminder: Provides a

display reminder only without a voice reminder at phone connection. To make sure that 911 Assist works properly: •

SYNC must be powered and working properly at the time of the incident and throughout feature activation and use. The 911 Assist feature must be set on before the incident. You must pair and connect a Bluetooth-enabled and compatible cell phone to SYNC.

•

•

• A connected Bluetooth-enabled phone

must have the ability to make and maintain an outgoing call at the time of the incident.

• A connected Bluetooth-enabled phone must have adequate network coverage, battery power and signal strength. The vehicle must have battery power and be located in the U.S., Canada or in a territory in which 911 is the emergency number.

•

Fusion/Mondeo (CC7)

In the Event of a Crash Not all crashes will deploy an airbag or activate the fuel pump shut-off (the triggers for 911 Assist). If a connected cell phone sustains damage or loses its connection to SYNC during a crash, SYNC will search for and try to connect to a previously paired cell phone; SYNC will then attempt to call the emergency services. Before making the call: •

SYNC provides a short window of time (about 10 seconds) to cancel the call. If you fail to cancel the call, SYNC attempts to dial 911. SYNC says the following, or a similar message: "SYNC will attempt to call 911, to cancel the call, press Cancel on your screen or press and hold the phone button on your steering wheel."

•

If you do not cancel the call, and SYNC makes a successful call, a pre-recorded message plays for the 911 operator, and then the occupant(s) in your vehicle is able to talk with the operator. Be prepared to provide your name, phone number and location immediately, because not all 911
systems are capable of receiving this information electronically. 911 Assist May Not Work If •

Your cellular phone or 911 Assist hardware sustains damage in a crash. The vehicle's battery or the SYNC system has no power. The phone(s) thrown from your vehicle are the ones paired and connected to the system.

•

•

323

SYNC™

911 Assist Privacy Notice When you turn on 911 Assist, it may disclose to emergency services that your vehicle has been in a crash involving the deployment of an airbag or activation of the fuel pump shut-off. Certain versions or updates to 911 Assist may also be capable of electronically or verbally disclosing to 911 operators your vehicle location or other details about your vehicle or crash to assist 911 operators to provide the most appropriate emergency services. If you do not want to disclose this information, do not turn the feature on. Vehicle Health Report WARNING

Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Report supplements, but cannot replace, normal maintenance and vehicle inspection. Vehicle Health Report only monitors certain systems electronically monitored by your vehicle and will not monitor or report the status of any other system, (such as brake lining wear). Failure to perform scheduled maintenance and regularly inspect your vehicle may result in vehicle damage and serious injury.

Note: This feature is only available in the United States. Note: Your Vehicle Health Report feature requires activation before use. Visit www.SYNCMyRide.com to register. There is no fee or subscription associated with Vehicle Health Report, but you must register to use this feature.

Note: This feature may not function properly if you have enabled caller ID blocking on your cellular phone. Before running a report, review the Vehicle Health Report Privacy Notice. Note: In order to allow a break-in period for your vehicle, you may not be able to create a Vehicle Health Report until your vehicle odometer has reached 200 miles. Note: Cellular phone and SMS charges may apply when making a report. Register for Vehicle Health Report and set your report preferences at www.SYNCMyRide.com. After registering, you can request a Vehicle Health Report (inside your vehicle). Return to your account at www.SYNCMyRide.com to view your report. You can also choose for SYNC to remind you automatically to run reports at specific mileage intervals. The system allows you to check your vehicle's overall health in the form of a diagnostic report card. The vehicle health report contains valuable information such as: • Vehicle diagnostic information • • Open recalls and Field Service Actions • Items noted during vehicle inspections by an authorized dealer that still need servicing.

Scheduled maintenance

You can run a report (after your vehicle has been running a minimum of 60 seconds) by pressing the voice button and saying "Vehicle health report", or pressing the phone button. To run a report using the phone button: 1. Press the phone button to enter phone

menu.

2. Scroll to select Vehicle Health, and

then press OK.

3. Scroll to select from the following

options:

324

Fusion/Mondeo (CC7)

SYNC™

User Preferences: Press OK to select and enter the menu. Scroll to select from:

Run Report?

Vehicle health report options Automatic Reports: Press OK to and select On or Off. Select On to have SYNC automatically prompt you to run a health report at certain mileage intervals.* Mileage Intervals: Press OK. Scroll to select between 5000, 7500 or 10000-mile intervals and press OK to make your selection. Return: Press OK to exit the menu. Press OK for SYNC to run a health report of your vehicle's diagnostic systems and send the results to Ford where it combines with scheduled maintenance information, open recalls and other field service actions and vehicle inspec- tion items that still need servicing from an authorized dealer.

*You must first turn this feature on before you can select the desired mileage interval.

Vehicle Health Report Privacy Notice When you create a Vehicle Health Report, Ford Motor Company may collect your cellular phone number (to process your report request) and diagnostic information about your vehicle. Certain versions or updates to Vehicle Health Report may also collect more vehicle information. Ford may use your vehicle information it collects for any purpose. If you do not want to disclose your cellular phone number or vehicle information, do not run the feature or set up your Vehicle Health Report profile at www.SYNCMyRide.com. See www.SYNCMyRide.com (Vehicle Health Report Terms and Conditions, and Privacy Statement) for more information.

SYNC Services: Traffic, Directions & Information (TDI) Note: SYNC Services requires activation before use. Visit www.SYNCMyRide.com to register and check your eligibility for complimentary services. Standard phone and message rates may apply. Subscription may be required. You must also have the active SYNC Services Bluetooth-enabled cellular phone paired and connected to the system in order to connect to, and use, SYNC Services. See Using SYNC™ With Your Phone (page 309). Note: This feature does not function properly if you have enabled caller ID blocking on your cellular phone. Make sure your cellular phone is not blocking caller ID before using SYNC Services.

325

Fusion/Mondeo (CC7)

SYNC™

2. When prompted, say "Services". This

initiates an outgoing call to SYNC Services using your paired and connected Bluetooth-enabled cellular phone.

3. Once you connect to the service, follow

the voice prompts to request the desired service, such as Traffic or Directions. You can also say, "What are my choices?" to receive a list of available services from which to choose.

4. Say, "Services" to return to the Services

main menu or for help, say, "Help". Connecting to SYNC Services Using the Phone Menu 1. Press the phone button to enter the

phone menu.

2. Scroll to Services. 3. Press OK to confirm and enter the

Services menu. The display indicates the system is connecting.

4. Press OK. SYNC initiates the call to the

Services portal.

5. Once you connect to the service, follow

the voice prompts to request the desired service, such as Traffic or Directions. You can also say, "What are my choices?" to receive a list of available services from which to choose.

6. Say, "Services" to return to the Services

main menu or for help, say, "Help". Receiving Turn-by-Turn Directions 1. When connected to SYNC Services,

say "Directions" or "Business search". To find the closest business or type of business to your current location, just say "Business search" and then "Search near me". If you need further assistance in finding a location you can say "Operator" at any time within a

Note: The driver is ultimately responsible for the safe operation of the vehicle, and therefore, must evaluate whether it is safe to follow the suggested directions. Any navigation features provided are only an aid. Make your driving decisions based on your observations of local conditions and existing traffic regulations. Do not follow the route suggestions if doing so would result in an unsafe or illegal maneuver, place you in an unsafe situation, or if you would be directed into an area that you consider unsafe. Maps used by this system may be inaccurate because of errors, changes in roads, traffic conditions or driving conditions. Note: When you connect, the service uses GPS technology and advanced vehicle sensors to collect your vehicle's current location, travel direction and speed to help provide you with the directions, traffic reports, or business searches you request. Further, to provide the services you request, for continuous improvement, the service may collect and record call details and voice communications. For more information, see SYNC Services Terms and Conditions at www.SYNCMyRide.com. If you do not want Ford or its service providers to collect your vehicle travel information or other information identified in the Terms and Conditions, do not subscribe or use the service. SYNC Services uses advanced vehicle sensors, integrated GPS technology and comprehensive map and traffic data, to give you personalized traffic reports, precise turn-by-turn directions, business search, news, sports, weather and more. For a complete list of services, or to learn more, please visit www.SYNCMyRide.com. Connecting to SYNC Services Using Voice Commands 1. Press the voice button.

326

Fusion/Mondeo (CC7)

SYNC™

3. While on an active route, you can select

or say "Route summary" or "Route status" to view the Route Summary turn list or the Route Status ETA. You can also turn voice guidance on or off, cancel the route or update the route.

If you miss a turn, SYNC automatically asks if you want the route updated. Just say, "Yes" when prompted and the system sends a new route to your vehicle. Disconnecting from SYNC Services 1. Press and hold the phone button on

the steering wheel.

2. Say "Goodbye" from the SYNC

Services main menu.

Directions or Business search to speak with a live operator. The system may prompt you to speak with an operator when it has difficulty matching your voice request. The live operator can assist you by searching for businesses by name or by category, residential addresses by street address or by name or specific street intersections. Operator Assist is a feature of your SYNC Services subscription. For more information on Operator Assist, visit www.SYNCMyRide.com/support.

2. Follow the voice prompts to select your

destination. Once you select your destination, the system uploads your current vehicle location, calculates a route based on current traffic conditions and sends it back to your vehicle. After the route download is complete, the phone call automatically ends. You then receive audible and visual driving instructions as you travel toward your destination.

Personalizing

Push to interrupt

Portable

SYNC Services quick tips You can personalize your Services feature to provide quicker access to your most used or favorite information. You can save address points such as work or home. You can also save favorite information like sports teams or a news category. You can learn more about personalization by logging onto www.SYNCMyRide.com. Press the voice button at any time (while connected to SYNC TDI Services) to interrupt a voice prompt or an audio clip (such as a sports report) and say your voice command. Your subscription is associated with your Bluetooth- enabled cellular phone number, not your VIN (Vehicle Identification Number). You can pair and connect your phone to any vehicle equipped with Traffic, Directions and Information and continue enjoying your personalized services.

327

Fusion/Mondeo (CC7)

SYNC™

SYNC Services quick tips You can even access your account outside your vehicle. Just use the number on your phone's call history. Traffic and Directions features do not function properly but information services and the 411 connect and text message features are available.

SYNC AppLink Note: You must pair and connect your smartphone to SYNC to access AppLink. Note: iPhone users need to connect the phone to the USB port in order to start the application. We recommend you lock your iPhone after starting an application. Note: TThe AppLink feature is not available if your vehicle is equipped with the MyFord Touch or MyLincoln Touch system. Note: Depending on your display type, you can access AppLink from the media menu, the phone menu, or by using voice commands. Once an app is running through AppLink, you can control main features of the app through voice commands and steering wheel controls. To Access Using the Phone Menu 1. Press the phone button to access the

SYNC phone menu on-screen.

2. Scroll to Mobile Apps and press OK to access a list of available applications.

3. Scroll through the list of available

applications and press OK to select a particular app.

4. Once an app is running through SYNC,

you can access an app’s menu by pressing the MENU button to first access the SYNC menu.

5. Select "SYNC-Media" by pressing OK.

Fusion/Mondeo (CC7)

6. Scroll until " Menu" is displayed (such as, Pandora Menu), then press OK. From here, you can access an application's features, such as Thumbs up and Thumbs down. For more information, please visit www.SYNCMyRide.com.

To Access Using the Media Menu 1. Press the AUX button on the center

2. Press MENU to access the SYNC

console.

menu.

3. Select "SYNC-Media" by pressing OK. 4. Scroll to Mobile Apps and press OK to access a list of available applications.

5. Scroll through the list of available

applications and press OK to select a particular app.

6. Once an app is running through SYNC,

you can access an app’s menu by pressing the MENU button to first access the SYNC menu.

7. Select "SYNC-Media" by pressing OK. 8. Scroll until " Menu" is displayed (such as, Pandora Menu), then press OK. From here, you can access an application's features, such as Thumbs up and Thumbs down. For more information, please visit www.SYNCMyRide.com.

To Access Using Voice Commands 1. Press the voice icon. 2. When prompted, say "Mobile Apps".

328

SYNC™

To Connect Using the System Menu 1. Plug the device into the USB port. 2. Press AUX and then MENU to enter

the media menu.

3. Scroll to Select Source. Press OK. 4. Scroll to USB. Press OK. 5. Depending on how many digital media

files are on your connected device, Indexing may appear in the radio display. When indexing is complete, the screen returns to the Play menu.

Tracks Explore USB Similar Music

Press OK and scroll through selections of: • Play All • Albums • Genres • Playlists • • • • Return What's Playing? At any time when a track is playing, you can press the voice icon and ask the system "What's playing?". The system reads the metadata tags (if populated) of the playing track to you. Media Voice Commands

Press the voice icon. When prompted, say "USB", then any of the following:

3. Say the name of the application after

the tone.

4. The app should start. While an app is running through SYNC, you can press the voice button and speak commands specific to the app, such as "Play Station Quickmix". Say "Help" to discover available voice commands. USING SYNC™ WITH YOUR MEDIA PLAYER You can access and play music from your digital music player over your vehicle's speaker system using the system's media menu or voice commands. You can also sort and play your music by specific categories, such as artist and album. SYNC is capable of hosting nearly any digital media player including: iPod®, Zune™, Plays from device players, and most USB drives. SYNC also supports audio formats, such as MP3, WMA, WAV and ACC. Connecting Your Digital Media Player to the USB Port Note: If your digital media player has a power switch, make sure you switch it on before plugging it in. To Connect Using Voice Commands 1. Plug the device into the USB port. 2. Press the voice icon and when

prompted, say "USB".

3. You can now play music by saying any

of the appropriate voice commands. See the media voice commands.

329

Fusion/Mondeo (CC7)

E142599SYNC™

"USB"

"Autoplay off"

"Autoplay on"

"Connections"

"Pause"

"Play"

"Play album "1,2

"Play all"

"Play artist "1,2

"Play genre "1,2

"Play next folder"3
"Play next track"

"Play playlist "1,2

"Play previous folder"3
"Play previous track"

"Play song "1

"Play track "1,2

"Refine album "1,2

"Refine artist "1,2

"Refine song "1

"Refine track "1,2

"Repeat off" "Repeat on"

"Search album "1,2

"Search artist "1,2

"Search genre "1

"Search song "1

"Search track "1,2

"Shuffle off"

"Shuffle on"

"Similar music" "What's playing?"

1 is a dynamic listing, meaning that it could be the name of anything, such as a group, artist or song. 2 These voice commands are not available until indexing is complete. 3 These voice commands are only available in folder mode.

330

Fusion/Mondeo (CC7)

SYNC™

"Autoplay"

"Search genre" or "Play genre"

"Similar music"

"Search" or "Play" artist, track or album "Refine"

Voice command guide

Turn autoplay on to listen to music processed during indexing. Turn autoplay off to allow the indexing process to finish before the system plays any of your music.* The system searches all the data from your indexed music and, if available, begins to play the chosen type of music. You can only play genres of music that are present in the GENRE metadata tags that you have on your digital media player. The system compiles a playlist and then plays music similar to what is currently playing from the USB port using indexed metadata information. The system searches for specific artist, track or album information from the music indexed through the USB port. This allows you to make your previous command more specific. For example, if you asked to search and play all music by a certain artist, you could then say, "Refine album" and choose a specific album from the list to view. If you then select Play, the system only plays music from that specific album.

*Indexing times can vary from device to device and with regard to the number of songs the system needs to process.

Press the voice icon. When prompted, say, "Bluetooth audio", then any of the following:

"BLUETOOTH AUDIO"

"Connections"

"Pause" "Play"

"Play next track"

"Play previous track"

331

Fusion/Mondeo (CC7)

SYNC™

Media Menu Features The media menu allows you to select your media source, how to play your music (such as by artist, genre, shuffle or repeat),

and also to add, connect or delete devices. 1. Press AUX and then MENU to enter

the media menu.

2. Scroll to cycle through:

When you select:

Play Menu

Select Source

Media Settings

Mobile Apps

Fusion/Mondeo (CC7)

You can:

Play your music by artist, album, genre, playlist, track, similar music or play all music. You can also choose to Explore USB to view the supported digital music files on your playing device. Select and play music from your USB port, auxiliary input jack (line in) or stream music from your Bluetooth-enabled phone. SYNC USB: Press OK to access music plugged into your USB port. You can also plug in devices to charge them (if supported by your device). Once connected, the system indexes any readable media files.1
Bluetooth Audio: This is a phone-dependent feature that allows you to stream music playing on your Bluetooth- enabled phone. If supported by your device, you can press SEEK to play the previous or next track. SYNC Line In: Press OK to select and play music from your portable music player over your vehicle's speakers.2
Choose to shuffle or repeat your music and select your Autoplay settings. Once you turn these selections on, they remain on you turn them off. Press SEEK to play the previous or next track.3
Shuffle: Press OK to shuffle available media files in the current playlist. To shuffle all media tracks, you must select Play All in the play menu and then select Shuffle. Repeat: Press OK to repeat any song. Autoplay: Turn autoplay on to listen to music processed during indexing. Turn autoplay off to allow the indexing process to finish before the system plays any of your music.4
Interact with SYNC-capable mobile applications on your smartphone.

332

SYNC™

You can:

When you select:

System Settings

Access Bluetooth Device menu listings (Add, Connect, Set as Primary, On and Off, Delete) as well as Advanced menu listings (prompts, languages, defaults, master reset, install application and system information). Press OK to exit the media menu.

Exit Media Menu 1The time required to complete this depends on the size of the media the system needs to index. If autoplay is on, you can listen to media processed during indexing. If autoplay is off, you cannot listen to music until the system finishes indexing media. SYNC is capable of indexing thousands of average size media and notifies you if it reaches the maximum indexing file size. 2If you have already connected a device to the USB port, you cannot access the line in feature. Some digital media players require both USB and line in ports to stream data and music separately. 3Some digital media players require both USB and line in ports to stream data and music separately 4Indexing times can vary from device to device and with regard to the number of songs the system needs to process.

Accessing Your Play Menu This menu allows you to select and play your media by artist, album, genre, playlist, track, similar music or even to explore what is on your USB device. Note: If your digital media player has a power switch, make sure you switch it on before plugging it in.

1. Press AUX and then MENU to enter

the media menu.

2. Scroll to Play. Press OK. If there are no media files to access, the display indicates there is no media. If there are media files, you have the following options:

When you select:

You can:

Play All

Artists

Fusion/Mondeo (CC7)

Play all indexed media (tracks) from your playing device in flat file mode, one at a time in numerical order. Press OK to select. The first track title appears in the display. Sort all indexed media by artist. Once selected, the system lists and then play all artists and tracks alphabetically. If there are fewer than 255 indexed artists, the system lists them alphabetically in flat file mode. If there are more than 255, the system categorizes them alphabetically.

333

SYNC™

When you select:

You can:

Albums

Genres

Playlists

Tracks

Explore USB

Similar Music*

1. Press OK to select. You can select to play All Artists or any indexed artist. 2. Scroll to choose the desired artist. Press OK. Sort all indexed media by albums. If there are fewer than 255 indexed albums, the system lists them alphabetically in flat file mode. If there are more than 255, the system categorizes them alphabetically. 1. Press OK to enter the album menu and select from playing all albums or from any individual indexed album. 2. Scroll to choose the desired album. Press OK. Sort indexed music by genre (category) type. SYNC lists the genres alphabetically in flat file mode. If there are more than 255, the system categorizes them alphabetically. 1. Press OK to select. 2. Scroll to select the desired genre. Press OK. Access your playlists (from formats, such as .ASX, .M3U, .WPL or .MTP). The system lists your playlists alphabetic- ally in flat-file mode. If there are more than 255, the system categorizes them alphabetically. 1. Press OK to select. 2. Scroll to select the desired playlist. Press OK. Search for and play a specific indexed track. SYNC lists your tracks alphabetically in flat file mode. If there are more than 255, the system categorizes them alphabetic- ally. 1. Press OK to select. 2. Scroll to select the desired track. Press OK. Explore all supported digital media on your media device connected to the USB port. You can only view media content which is compatible with SYNC; other files saved are not visible. 1. Press OK to select. 2. Scroll to explore indexed media on your flash drive. Play music similar to what is currently playing from the USB port. The system uses the metadata information of each song to compile a playlist for you.

334

Fusion/Mondeo (CC7)

SYNC™

When you select:

You can:

Press OK to select. The system creates a new list of similar songs and begins playing. This feature does not include tracks with incomplete metadata information. Exit the current menu.

Return *With certain playing devices, if your metadata tags are not populated, the tracks are not available in voice recognition, play menu or similar music. However, if you place these tracks onto your playing device in "Mass Storage Device Mode", they are available in voice recognition, play menu browsing and similar music. The system places Unknown items into any unpopulated metadata tag.

System Settings Bluetooth Devices The Bluetooth Devices menu allows you to add, connect and delete a device as turn the Bluetooth feature on and off.

1. Press AUX and then MENU to enter

the media menu.

2. Scroll to System Settings. Press OK. 3. Scroll to Bluetooth Devices. Press OK.

When you select:

Add Bluetooth Device*

Connect Bluetooth Device

Set Bluetooth

Delete Device

Delete All Devices

Fusion/Mondeo (CC7)

You can: Pair more devices to the system. 1. Press OK to select and press OK again when Find SYNC appears in the display. 2. Follow the directions in your phone's manual to put your phone into discovery mode. A six-digit PIN appears in the display. 3. When prompted on your phone's six-digit display, enter the PIN. Connect a previously paired Bluetooth-enabled device. 1. Press OK to select and view a list of previously paired devices. 2. Scroll until you find the desired device, and then press OK to connect the device. Turn the Bluetooth feature on and off.** 1. Press OK and scroll to toggle between On and Off. 2. Make a selection, and then press OK. Delete a paired media device. 1. Press OK and scroll to select the device. 2. Press OK to confirm. Delete all previously paired devices.

335

SYNC™

When you select:

You can:

Press OK to select. Exit the current menu.

Return *This is a speed-dependent feature. **Setting Bluetooth to off disconnects all Bluetooth devices and turns off all Bluetooth features.

Advanced The Advanced menu allows you to access and set prompts, languages, defaults and perform a master reset.

1. Press AUX and then MENU to enter

the media menu.

2. Scroll to System Settings. Press OK. 3. Scroll to Advanced. Press OK.

When you select:

Prompts

Languages

Factory Defaults

You can:

Have SYNC guide you by asking questions, helpful hints or ask you for a specific action. 1. Press OK to select and scroll to select between on or off. 2. Press OK when the desired selection appears in the display. SYNC takes you back to the Advanced menu. Choose from English, Français or Español. The displays and prompts are in the selected language. 1. Press OK to select and then scroll through the languages. 2. Press OK when the desired selection appears in the display. 3. If you change the language setting, the display indicates that the system is updating. When complete, SYNC takes you back to the Advanced menu. Return to the factory default settings. This selection does not erase your indexed information (phonebook, call history, text messages and paired devices). 1. Press OK to select. 2. Press OK again when Restore Defaults? appears in the display. 3. Press OK to confirm.

336

Fusion/Mondeo (CC7)

SYNC™

When you select:

Master Reset

Application

Return

You can:

Completely erase all information stored on SYNC (all phonebook, call history, text messages and all paired devices) and return to the factory default settings. Download new software applications (if available) and then load the desired applications through your USB port. See the web site for more information. Exit the current menu.

SYNC™ TROUBLESHOOTING Your SYNC system is easy to use. However, should questions arise, see the tables below.

Use the website at any time to check your phone's compatibility, register your account and set preferences as well as access a customer representative via an online chat (during certain hours). Visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca for more information.

Issue

There is excessive back- ground noise during a phone call.

During a call, I can hear the other person but they cannot hear me.

SYNC is not able to down- load my phonebook.

Phone issues

Possible cause(s)

The audio control settings on your phone may be affecting SYNC perform- ance. This may be a possible phone malfunction.

· This is a phone-dependent feature. · This may be a possible phone malfunction.

Possible solution(s)

Review your phone's manual about audio adjustments.

Try turning off the device, resetting the device, removing the device's battery, then trying again. · Go to the website to review your phone's compatibility. · Try turning off the device, resetting the device or removing the device's battery, then trying again. · Try pushing your phone- book contacts to SYNC by using the Add Contacts feature. · Use the SYNCmyphone feature available on the website.

337

Fusion/Mondeo (CC7)

SYNC™

Phone issues

Possible cause(s)

This may be a limitation on your phone's capability.

Issue

The system says Phonebook Downloaded but the phonebook in SYNC is empty or missing contacts.

I am having trouble connecting my phone to SYNC.

· This is a phone-dependent feature. · This may be a possible phone malfunction.

Text messaging is not working on SYNC.

· This is a phone-dependent feature. · This may be a possible phone malfunction.

338

Fusion/Mondeo (CC7)

Possible solution(s) · Try pushing your phone- book contacts to SYNC by using the Add Contacts feature. · If the missing contacts are stored on your SIM card, try moving them to the device memory. · Remove any pictures or special ring tones associ- ated with the missing contact. · Go to the website to review your phone's compatibility. · Try turning off the device, resetting the device or removing the device's battery, then trying again. · Try deleting your device from SYNC, deleting SYNC from your device and trying again.