2006 Ford Freestyle Owners Manual

which allows you to play commercial DVDs, CDs and also most CD R/W, DVD R/W, VCD, and MP3 media. You can also plug in and play auxiliary media devices such as video game systems and MP3 players. Please review this material to become familiar with the Family Entertainment System (FES) features and safety information. DVD player controls

on the DVD, or to go up in cursor mode.

1. MAIN control • NEXT — Press to access the next track on the CD, the next chapter • PREV — Press to access the previous track on the CD, the previous • REV — Press to reverse within the active CD track or DVD chapter in

chapter on the DVD, or to go down in cursor mode.

play mode. Also press to move the cursor left in the menu active mode.

• FWD — Press to advance within the active CD track or DVD chapter in play mode. Also press to move the cursor right in the menu active mode.

25

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

2. PLAY/PAUSE control Press to playback or pause the DVD. 3. DIM control Press (+) to increase or (-) to decrease the brightness on the screen. 4. ENTER control Press to select the function highlighted on the active menu. ENTER may also be used by some user interactive discs during movie play. 5. MENU control Press to bring up the disc menu. 6. AUX control Press to switch DVD player from play mode to auxiliary mode. 7. Auxiliary jacks Input jacks for standard video/audio media device. 8. STOP/EJECT control Press once to stop a disc from playing. Press a second time to eject the disc. (If a disc is not playing, but is present in the system, pressing eject will eject the disc). 9. DISPLAY (DISP) control Press to enable the on screen display of the player’s menu and user’s display adjustments. Double click the DISP button to change the format of the display. If the DVD disc format is NORMAL, it can be changed to full screen by selecting WIDE SCREEN. Use the NEXT and PREV button to scroll through the different format of the display. Please note that the screen quality will degrade if the display mode is changed to “Zoom.”

DVD control features

Menu control Press the MENU control to enter the DVD menu. This allows you to navigate and select within the DVD generated menu structure. Once in MENU mode:

26

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

• Press the NEXT control to move the cursor one position upward

• Press the PREV control to move the cursor one position downward

• Press the REV control to move

the cursor left one position

• Press the FWD control to move

the cursor right one position

REV

NEXT

PREV

FWD

REV

NEXT

PREV

FWD

REV

NEXT

PREV

FWD

REV

NEXT

PREV

FWD

REV

FWD

NEXT

PREV

Next/Previous control The NEXT (up) and PREV (down) controls allows you to access the next or previous track on a CD or chapter on a DVD. When pressed, the playing audio will mute momentarily while the next chapter is accessed. Press and hold to advance or reverse multiple tracks or chapters. REV/FWD control Press the REV/FWD control during playback mode to reverse or advance at a normal speed. Press the REV/FWD control again to cancel the reverse/advance action and return to normal playback mode

PREV

NEXT

FWD

REV

27

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

Enter control The ENTER control allows you to select highlighted items when in MENU mode. CD play mode Press NEXT during CD play to advance to the next track. If you press NEXT while the last track is playing, the system will wrap around to the first track and begin play.

ENTER

REV

NEXT

PREV

FWD

Slow play mode To enter slow play mode, press the PLAY/PAUSE control. This will pause the disc playing. Once the system is in pause mode, press the FWD or REV control for slow motion playback. Three different speeds in forward and one speed in reverse are available depending on how long the control is held. Slow reverse only has one speed. Press the control once for slow motion playback. Press the control again to disengage slow motion playback. Press the PLAY/PAUSE control to return to normal playback mode. User menu mode To adjust the display setting, press DISP once and the player menu will appear. Press DISP again to adjust the display setting. Use the arrow controls and the ENTER controls to select the various screen settings. (Available screen selections are 16x9, 4x3 and Zoom). The DVD player will read the disc type and configure the display accordingly. Some movies have a wide screen movie format to fit a normal 4x3 screen. In this case, the movie will have black bars on the top and bottom. When shown on the screen, it may appear as a small screen within the wide screen. It may be desirable to view this type of movie in zoom mode. To enter zoom mode, press DISP once for the player menu and again to adjust the display setting. Select zoom from the screen settings by using the arrow and ENTER controls.

DISP

28

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Remote control

Entertainment Systems

1. REV (REVERSE) control Press to reverse the direction of the DVD movie. 2. FWD (FORWARD) control Press to advance the direction of the DVD movie. 3. PLAY/STOP control When playing, press PLAY/STOP to stop the disc. When stopped, press PLAY/STOP to play the disc. 4. SEEK control Press to reverse ( track of the CD. 5. DISP (DISPLAY) control Press to enable the on screen display of the player’s menu and display settings. Once the display is on, use SEEK to highlight the desired screen setting. 6. ENTER /MEMORY control In DVD playback mode, press the control to select a highlighted item from the menu. In stop mode, press the control to select the next audio memory preset.

) the chapter of the DVD or the

) or advance (

29

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

7. MENU/MODE control In DVD playback mode, press to access the disc menu. In stop mode, press to change media types (e.g. AM, FM, CD . . . ) 8. VOL (VOLUME) control Press (+) to increase or (-) to decrease the volume level. Dual play mode Press the radio preset controls 2
and 4 at the same time to enable or disable dual play. During dual play, the rear vehicle speakers will be deactivated and the wireless headphones will become active. Please note that the infrared headphones are active only when the Family Entertainment System is playing a movie. During dual play mode, two different medias can be played in the vehicle: 1. The driver can choose, and control, a source on the main radio face (radio, CD or DVD) and listen to it using the front speakers. 2. Passengers in the rear can listen to the DVD player or AUX input via the wireless headphones. Single play mode When the ignition is turned on, the radio will be in Single Play Mode. Single play mode allows one media selection (FM/AM, CD, DVD or AUX) to be heard on all the vehicle speakers. If radio is in Dual Play Mode, with a DVD playing in the rear, and another media (FM/AM, CD) playing on front speakers, changing to single play will turn the DVD player off. When radio is powered off and back on, it will be in Single Play mode, even if upon power off the radio was in Dual play mode.

30

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Battery replacement

Entertainment Systems

Batteries are provided with the remote control unit. Since all batteries have a limited shelf life, replace them when the remote control fails to control the DVD player. There is a LED indicator light on the remote control that will illuminate when any control is pressed. Slide the battery cover off as shown on the remote control to access the batteries. The remote control unit uses two AAA batteries. Parental control Simultaneously press the preset controls 3 and 5 to enable or disable the rear seat controls, the controls on your Family Entertainment DVD system including the remote control, and the DVD screen (if equipped). For further information about the Rear Seat Controls, refer to Auxiliary audio controls in the Entertainment Chapter.

31

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

Wireless headphones Your system is equipped with 2 sets of wireless headphones. (Two AAA batteries are needed to operate the headphones.) Batteries are included.

To install the batteries, remove the screw at the bottom of the cover. Then, lightly press down on top, and slide the cover off. When replacing the batteries, use two new batteries (alkaline recommended) and install them with the correct orientation as indicated in the battery housing.

Wireless headphone operation To operate the headphones: • Press the ON/OFF button on the

earpiece to turn on the headphones. A red LED (indicator light) will illuminate indicating the headphones are powered ON. Press ON/OFF again to turn the headphones off. • Adjust the headphones to comfortably fit your head using the headband adjustment. • Adjust the volume control to the

desired listening level.

Note: The volume level of the wireless headphones can only be

32

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

controlled by the thumbwheel. Neither the remote control nor the rear seat controls will affect the volume output of the wireless headphones. When not using the headphones, turn them off to preserve battery life. The headphones will automatically turn off after five minutes if they have not received an infrared audio signal from the Family Entertainment System (FES). Note: Ensure that the line of sight between the headphone and infrared transmitter (mounted on the DVD housing) is not obstructed for optimal performance. Liquid Crystal Display (LCD) flip-down screen

The LCD screen rotates down and can be adjusted to your desired viewing angle. When not in use, rotate the screen up into the storage housing. Note: Ensure that the screen is securely latched into the housing when stored.

1. 7.0” (diagonal) active matrix liquid crystal display (LCD). 2. Display housing. 3. Dimmer switch. Press +/- to increase/decrease the brightness of the display.

33

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

Playback and format • The DVD player of your Family Entertainment DVD System can only

be used in the “playback” mode. (The DVD player does not offer a record feature.) • The system plays standard CDs, DVDs and also plays most CD R/W,

DVD R/W, VCD and MP3 media.

255 files. Discs containing more than 255 files will not play.

Saving MP3 files • Your Family Entertainment System supports discs containing up to • Always save MP3 files with the .mp3 extension. The player recognizes an MP3 file by the .mp3 extension, so MP3 files saved with different extensions will not be played. Never save a non-MP3 file with the .mp3
extension as the file will not play properly. • The player supports multi session discs. However, be sure to import

the previous session of the disc before you add new files. If you do not import the previous session, only the last session will be played. • When burning a disc, ensure that you close/finalize the disc before playback, or the disc may not play properly or an error message may appear.

• Some CD-RW discs may operate inconsistently and may cause an error message to appear. We recommend burning MP3 files onto CD-R discs.

Family Entertainment DVD System protection circuits High temperature sensor circuit • Excessively high temperatures may cause damage to the DVD player. • When the temperature of the DVD player becomes too hot, the high

temperature sensor circuit stops machine operation. DVD/CD HOT will be displayed on the radio display.

• The DVD player will remain disabled until it cools to a normal

operating temperature. The length of time for the system to cool will vary depending on the climate and operating conditions.

Operating • Only use the system when the vehicle is started for optimal • If the Family Entertainment System (FES) is playing and the ignition is turned OFF, the system will turn off, and suspend playback. When

performance and to maintain battery life.

34

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

the ignition is turned on again, playback will begin from the last selected media source when the play control is pressed.

• To disable the DVD player rear controls, simultaneously press the 3
and 5 memory presets on the radio face. To enable the DVD player rear controls again, press the 3 and 5 presets simultaneously. • The DVD player is only capable of reading the bottom side of a disc. When inserting a single sided disc, the label should be up. For a multi-sided disc, the desired play side should be down when the disc is inserted into the player. • DVDs are formatted by regions. This DVD system can only play region

1 DVDs (DVDs manufactured for U.S. and Canada).

This unit is designed to play commercially pressed 4.75 (12 cm) audio compact discs and DVDs only. Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford DVD/CD players. Irregular shaped discs, discs with a scratch protection film attached, and discs with homemade paper (adhesive) labels should not be inserted into the player. The label may peel and cause the disc to become jammed. It is recommended that homemade discs be identified with permanent felt tip marker rather than adhesive labels. Ball point pens may damage discs. Please contact your dealer for further information. Inserting a CD/DVD With the ignition ON, inserting a CD/DVD into the DVD player automatically turns ON the FES and playback should begin immediately. The counter is automatically reset to 0:00:00 when any disc is inserted into the FES. Removing a CD/DVD (while playing) 1. Press the STOP/EJECT control to stop playback if a disc is playing. 2. Press the STOP/EJECT control again to eject the CD/DVD. If the CD/DVD is not removed within the allotted time, the system will pull the CD/DVD back into the system for safety purposes. If the CD/DVD will not eject from the system, press and hold the EJECT control for approximately 2 seconds. The disc should eject whether the vehicle ignition is ON or OFF. Playing an auxiliary device 1. Connect the video line from your video device to the YELLOW auxiliary input jack.

35

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

2. Connect the left and right audio lines to the WHITE (left) and RED (right) auxiliary input jacks respectively. 3. Press the MODE control repeatedly until DVD/CD AUX (no disc in player) or DVD/CD play (disc in player) illuminates in the radio display. If a disc is in the system, playback should begin. To enable the aux inputs, press the STOP control or press the AUX control on the DVD player. On-screen indicators

Each time a control is pressed, the operational status of the DVD player is shown on the screen. The following are some possible indicators: 1. DVD/ CD STATUS (PLAY/FWD/REV/PAUSE) 2. CD track number / DVD title 3. DVD chapter number 4. MEDIA COUNTER — displays current viewing time of desired media. (HOURS:MINUTES:SECONDS) 5. Viewing angle (of picture) - Adjustable with cursor controls and ENTER control. 6. Subtitles (specific language type - English, Spanish or French, dependent on disc capability and ON/OFF selection.) 7. AUDIO OUTPUT (not changeable) 8. AUDIO VERSION — (01 ENG., etc.) 9. DISPLAY SETTING (4x3, Zoom, 16x9) 10. STATUS ICON (FWD, x4, x8, x32, REV, x4, x8, x32, etc.)

36

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

Safety information Read all the safety and operating instructions before operating the system and retain for future reference. • Do not attempt to service, repair or modify the Family Entertainment DVD System. See your Ford or Lincoln Mercury dealer. • Do not insert foreign objects into the DVD compartment.

The front glass on the flip-down liquid crystal display (LCD) may break when hit with a hard surface. If the glass breaks, do not

touch the liquid crystalline material. In case of contact with skin, wash immediately with soap and water.

Do not expose the flip-down liquid crystal display (LCD) to direct sunlight or intensive ultraviolet rays for extensive periods of time. Ultraviolet rays deteriorate the liquid crystal. • Ensure that you review User Manuals for video games and video game

equipment when used as auxiliary inputs for your Family Entertainment DVD System.

• Do not operate video games or video equipment if the power cords and/or cables are broken, split or damaged. Carefully place cords and/or cables where they will not be stepped on or interfere with the operation of seats and/or compartments.

• Disconnect video games and video equipment power cords and/or • Avoid touching auxiliary input jacks with your fingers. Do not blow on • Do not clean any part of the DVD player with benzene, paint thinner

them or allow them to get wet or dirty.

cables when not in use.

or any other solvent.

Whenever a warning notice is received, the radio volume will be lowered to a volume that will allow the tones to be heard. The radio volume will return to the previous level after the warning notice is complete.

37

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

Federal Communication Commission (FCC) Compliance Changes or modifications not approved by Ford or Lincoln Mercury could void user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy. If not installed and used in accordance with the instructions, the Family Entertainment System (FES) may cause harmful interference with radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, (which can be determined by turning the equipment off and on), the user is encouraged to consult the dealer or an experienced radio/TV technician for help. Care and service of the DVD player Environmental extremes DVD players that are subjected to harsh environmental conditions may be damaged or perform at less than optimal capability. To avoid these outcomes, whenever possible avoid exposing your DVD player to: • extremely hot or cold temperatures. • direct sunlight. • high humidity. • a dusty environment. • locations where strong magnetic fields are generated. Temperature extremes When the vehicle is parked under direct sunlight or in an extremely cold place for a long period of time, wait until the cabin temperature of the vehicle is at normal temperature before operating the system. Humidity and moisture condensation Moisture in the air will condense in the DVD player under extremely humid conditions or when moving from a cold to a warm location. If moisture condensation occurs, do not insert a CD or DVD into the player. If one is already in the player, remove it and turn the DVD player ON to dry the moisture before inserting a DVD. This could take an hour or more depending on the amount of moisture.

38

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Entertainment Systems

Cleaning the liquid crystal display (LCD) flip-down screen Clean the display screen by applying a small amount of water or any ammonia-based household glass cleaner directly to a soft cloth. Rub the screen gently until the dust, dirt or fingerprints are removed. Do not spray the screen directly with water or glass cleaning solvents. Overspray from these fluids could drip down into the internal electronics of the screen and cause damage. Do not apply excessive pressure while cleaning the screen. Foreign substances Exercise care to prevent dirt and foreign objects from entering the DVD player compartment. If liquid is accidentally spilled onto the system, immediately turn the system OFF and consult a qualified service technician. Cleaning compact discs Inspect all discs for contamination before playing. If necessary, clean discs only with an approved CD cleaner and wipe from the center out to the edge. Do not wipe in a circular motion. Cleaning the DVD player Clean the exterior of the DVD player with a damp cloth. Do not use CD cleaning kits or CDs intended to clean the interior of your DVD player. Use of these products may damage your system.

39

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Climate Controls

MANUAL HEATING AND AIR CONDITIONING SYSTEM (IF EQUIPPED) 1. Temperature selection: Controls the temperature of the airflow in the vehicle. 2. Air flow selections: Controls the direction of the airflow in the vehicle. See the following for a brief description on each control setting: MAX A/C: Distributes recirculated air through the instrument panel vents only to cool the vehicle. This re-cooling of the interior air is more economical and efficient. Recirculated air may also help reduce undesirable odors from entering the vehicle.

: Distributes air through the instrument panel vents. : Distributes air through the instrument panel vents and floor vents.

O (OFF): Outside air is shut out and the climate system is turned off.

: Distributes air through the floor vents. Note: You may notice a

small amount of air flowing from the demister and defroster vents.

: Distributes air through the windshield defroster vents, demisters

and floor vents.

: Distributes outside air through the windshield defroster and

select another mode.

demister vents. Can be used to clear thin ice or fog from the windshield. To exit 3. Rear defroster: Press to activate/deactivate rear window defroster. Refer to Rear window defroster in this section for more information. Recirculated air: Press to activate/deactivate air recirculation 4. in the vehicle cabin. Recirculated air may reduce the amount of time to cool down the interior of the vehicle and may also help reduce undesired odors from reaching the interior of the vehicle. Recirculation engages automatically with selection of MAX A/C or can be engaged manually in any other airflow selection except defrost. Recirculation may turn off automatically in all airflow selections except MAX A/C. 5. A/C: Press to activate/deactivate air conditioning. Use with recirculated air to improve cooling performance and efficiency. Engages automatically in MAX A/C, Cannot be disabled in MAX A/C mode.

(floor/defrost).

(defrost) and

40

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

6. Fan speed adjustment: Controls the volume of air circulated in the vehicle.

Climate Controls

position.

airflow to the back seats.

the air flow selector in the

airflow selector in the O (OFF) or with recirculated air engaged.

Operating tips • To reduce fog build up on the windshield during humid weather, place • To reduce humidity build up inside the vehicle: do not drive with the • Do not put objects under the front seats that will interfere with the • Remove any snow, ice or leaves from the air intake area at the base of • For maximum cooling performance (MAX A/C): In the MAX A/C mode: • Move the temperature control selector to the coldest setting. • Set the fan to the highest speed initially, then adjust to maintain

the windshield.

passenger comfort.

and

modes:

In the • Move the temperature control selector to the coldest setting. • Select A/C and recirculated air • Set the fan to the highest speed initially, then adjust to maintain

colder airflow.

. Use

with A/C to provide

passenger comfort.

In extremely cold temperatures, to maximize overall heater performance it is suggested to not operate the auxiliary system (if so equipped) until the engine temperature gauge crosses into the normal operating range. To aid in side window defogging/demisting in cold weather: 1. Select 2. Select A/C. 3. Set the temperature control to full heat. 4. Set the fan speed to the highest setting. 5. Direct the outer instrument panel vents towards the side windows.

Do not place objects on top of the instrument panel as these objects may become projectiles in a collision or sudden stop.

41

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Climate Controls

DUAL ZONE AUTOMATIC TEMPERATURE CONTROL (IF EQUIPPED)

select another mode.

Defrost: Distributes outside air through the windshield defroster

Recirculated air: Press to activate/deactivate air recirculation

1. and demister vents. Can be used to clear thin ice or fog from the windshield. To exit 2. Passenger temperature control: Press to increase/decrease the airflow temperature for the passenger in the front of the vehicle. Rear defroster: Press to activate/deactivate rear window 3. R defroster. Refer to Rear window defroster in this section for more information. 4. in the cabin. Recirculated air may reduce the amount of time to cool down the interior of the vehicle and may also help reduce undesired odors from reaching the interior of the vehicle. Recirculation can be engaged manually in any other airflow selection except defrost. Recirculation may turn off automatically in all airflow selections. 5. A/C: Press to activate/deactivate air conditioning. Use with recirculated air to improve cooling performance and efficiency. Engages automatically in AUTO, defrost and floor/defrost. 6. floor vents. 7. small amount of air flowing from the demister and defroster vents.

: Distributes air through the floor vents. Note: You may notice a

: Distributes air through the windshield defroster, demister and

42

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

8.

: Distributes air through the instrument panel and floor vents.

Climate Controls

: Distributes air through the instrument panel vents.

Front fan speed control: Press to manually increase or

9. 10. Manual override controls: Allows you to manually select where airflow is directed. To return to full automatic control, press AUTO. 11. decrease the fan speed. To return to automatic fan operation, press AUTO. 12. EXT: Press to display outside temperature. Press again to display cabin temperature settings. 13. F/C (Temperature conversions): Press to switch temperature display between ° Fahrenheit and ° Celsius. 14. OFF: Outside air is shut out and the climate control system is turned off. 15. Driver temperature control: Press to increase/decrease the temperature on the driver side of the cabin. Sets the passenger side temperature also when DUAL is disengaged. The recommended vehicle cabin setting is between 72°F (22°C) and 75°F (24°C). Dual temperature control: Press and hold the AUTO button to engage-disengage separate passenger side temperature control. 16. AUTO: To engage automatic temperature control, press AUTO and select the desired temperature using the temperature control. The system will automatically determine fan speed, airflow location, A/C on or off, and outside or recirculated air, to heat or cool the vehicle to reach the desired temperature.

43

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Climate Controls

Dual Zone Automatic Temperature Control with heated seats (if equipped)

select another mode.

Defrost: Distributes outside air through the windshield defroster

1. and demister vents. Can be used to clear thin ice or fog from the windshield. To exit 2. Passenger temperature control: Press to increase/decrease the airflow temperature for the passenger in the front of the vehicle. Rear defroster: Press to activate/deactivate rear window 3. R defroster. Refer to Rear window defroster in this section for more information. 4. DUAL (Dual temperature control): Press to engage/disengage separate passenger side temperature control. 5. setting (2 indicator lights), press again to activate low heat setting (1
indicator light), and press again to deactivate the passenger heated seat. Note: The heated seat feature will remain on for approximately ten minutes. 6. in the cabin. Recirculated air may reduce the amount of time to cool down the interior of the vehicle and may also help reduce undesired odors from reaching the interior of the vehicle. Recirculation can be engaged manually in any other airflow selection except defrost. Recirculation may turn off automatically in all airflow selections.

Recirculated air: Press to activate/deactivate air recirculation

Passenger heated seat control: Press once to activate high heat

44

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Climate Controls

7. A/C: Press to activate/deactivate air conditioning. Use with recirculated air to improve cooling performance and efficiency. Engages automatically in AUTO, defrost and floor/defrost. 8. Airflow direction control: Press to toggle through the air distribution modes listed below. The selected mode will be shown in the display.

: Distributes air through the instrument panel and center console

vents (if equipped).

: Distributes air through the instrument panel, floor and center

console vents (if equipped).

: Distributes air through the floor vents. Note: You may notice a

small amount of air flowing from the demister and defroster vents.

: Distributes air through the windshield defroster, demister and floor

Front fan speed control: Press to manually increase or

Driver heated seat control: Press to heat the driver seat. Press

vents. 9. Manual override controls: Allows you to manually select where airflow is directed. To return to full automatic control, press AUTO. 10. once to activate high heat (two indicator lights). Press again to activate low heat (one indicator light). Press again to deactivate the driver heated seat. Note: The heated seat feature will remain on for approximately ten minutes. 11. decrease the fan speed. To return to automatic fan operation, press AUTO. 12. EXT: Press to display outside temperature. Press again to display cabin temperature settings. 13. F/C (Temperature conversions): Press to switch temperature display between ° Fahrenheit and ° Celsius. 14. OFF: Outside air is shut out and the climate control system is turned off. 15. Driver temperature control: Press to increase/decrease the temperature on the driver side of the cabin. Sets the passenger side temperature also when DUAL is disengaged. The recommended vehicle cabin setting is between 72°F (22°C) and 75°F (24°C). 16. AUTO: Press to engage automatic temperature control. Select the desired temperature using the temperature control. The system will automatically determine fan speed, airflow location, A/C on or off, and outside or recirculated air, to heat or cool the vehicle to reach the desired temperature.

45

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Climate Controls

Dual Zone Automatic Temperature Control with rear passenger compartment climate control (if equipped)

select another mode.

Defrost: Distributes outside air through the windshield defroster

1. and demister vents. Can be used to clear thin ice or fog from the windshield. To exit 2. Rear temperature control: Press to enable the auxiliary system and set the desired rear cabin airflow temperature with the front control. The rear cabin airflow temperature will match the driver airflow temperature setting when only the center rear temperature bar is illuminated. The rear cabin airflow temperature will be warmer or cooler than the driver airflow temperature setting when more than one temperature bar is illuminated. 3. Passenger temperature control: Press to increase/decrease the airflow temperature for the passenger in the front of the vehicle. Rear defroster: Press to activate/deactivate rear window 4. R defroster. Refer to Rear window defroster in this section for more information. Rear fan speed control: Press to enable the auxiliary system or 5. to adjust the rear fan speed from the front control. The rear fan speed settings are 4, 3, 2, 1 and OFF.

46

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Climate Controls

Front fan speed control: Press to manually increase or

Recirculated air: Press to activate/deactivate air recirculation

: Distributes air through the windshield defroster, demister and

: Distributes air through the floor vents. Note: You may notice a

: Distributes air through the instrument panel and floor vents. : Distributes air through the instrument panel vents.

6. in the cabin. Recirculated air may reduce the amount of time to cool down the interior of the vehicle and may also help reduce undesired odors from reaching the interior of the vehicle. Recirculation can be engaged manually in any other airflow selection except defrost. Recirculation may turn off automatically in all airflow selections. 7. A/C: Press to activate/deactivate air conditioning. Use with recirculated air to improve cooling performance and efficiency. Engages automatically in AUTO, defrost and floor/defrost. 8. floor vents. 9. small amount of air flowing from the demister and defroster vents. 10. 11. 12. Manual override controls: Allows you to manually select where airflow is directed. To return to full automatic control, press AUTO. 13. decrease the fan speed. To return to automatic fan operation, press AUTO. 14. OFF: Outside air is shut out and the climate control system is turned off. 15. Driver temperature control: Press to increase/decrease the temperature on the driver side of the cabin. Sets the passenger side temperature also when DUAL is disengaged. The recommended vehicle cabin setting is between 72°F (22°C) and 75°F (24°C). 16. AUTO: To engage automatic temperature control, press AUTO and select the desired temperature using the temperature control. The system will automatically determine fan speed, airflow location, A/C on or off, and outside or recirculated air, to heat or cool the vehicle to reach the desired temperature. 17. F/C (Temperature conversions): Press to switch temperature display between ° Fahrenheit and ° Celsius. 18. REAR: Press to enable the control located in the rear seat. Press again to turn the auxiliary system OFF. 19. EXT: Press to display outside temperature. Press again to display cabin temperature settings.

47

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Climate Controls

position.

the air flow selector in the

airflow selector in the OFF or with recirculated air engaged.

Operating tips • To reduce fog build up on the windshield during humid weather, place • To reduce humidity build up inside the vehicle: do not drive with the • Do not put objects under the front seats that will interfere with the • Remove any snow, ice or leaves from the air intake area at the base of • For maximum cooling performance (MAX A/C): In AUTO mode, press AUTO control and set to desired temperature.

airflow to the back seats.

the windshield.

In manual override control, select and set the temperature to 60°F (16°C). Set the fan to the air highest speed initially, then adjust to maintain passenger comfort. • To improve the A/C cool down, drive with the windows slightly open

, A/C and recirculated

or

for 2–3 minutes after starting the vehicle or until the vehicle has “aired out.”

In extremely cold temperatures, to maximize overall heater performance it is suggested to not operate the auxiliary system (if so equipped) until the engine temperature gauge crosses into the normal operating range. To aid in side window defogging/demisting in cold weather: 1. Select 2. Select A/C. 3. Adjust the temperature control to maintain comfort. 4. Set the fan to the highest speed. 5. Direct the outer instrument panel vents towards the side windows.

Do not place objects on top of the instrument panel as these objects may become projectiles in a collision or sudden stop.

48

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Dual Zone Automatic Temperature Control with heated seats and rear passenger compartment climate control (if equipped)

Climate Controls

select another mode.

Defrost: Distributes outside air through the windshield defroster

1. and demister vents. Can be used to clear thin ice or fog from the windshield. To exit 2. Rear temperature control: Press to enable the auxiliary system and set the desired rear cabin airflow temperature with the front control. The rear cabin airflow temperature will match the driver airflow temperature setting when only the center rear temperature bar is illuminated. The rear cabin airflow temperature will be warmer or cooler than the driver airflow temperature setting when more than one temperature bar is illuminated. 3. Passenger temperature control: Press to increase/decrease the airflow temperature for the passenger in the front of the vehicle. 4. R Refer to Rear window defroster in this section for more information. Rear fan speed control: Press to enable the auxiliary system or 5. to adjust the rear fan speed from the front control. The rear fan speed settings are 4, 3, 2, 1 and OFF. 6. setting (2 indicator lights), press again to activate low heat setting (1
indicator light), and press again to deactivate the passenger heated seat. Note: The heated seat feature will remain on for approximately ten minutes.

Rear defroster: Press to activate/deactivate rear window defroster.

Passenger heated seat control: Press once to activate high heat

49

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Climate Controls

Recirculated air: Press to activate/deactivate air recirculation

7. in the cabin. Recirculated air may reduce the amount of time to cool down the interior of the vehicle and may also help reduce undesired odors from reaching the interior of the vehicle. Recirculation can be engaged manually in any other airflow selection except defrost. Recirculation may turn off automatically in all airflow selections. 8. A/C: Press to activate/deactivate air conditioning. Use with recirculated air to improve cooling performance and efficiency. Engages automatically in AUTO, defrost and floor/defrost. 9. DUAL (Dual temperature control): Press to engage/disengage separate passenger side temperature control. 10. Airflow direction control: Press to toggle through the air distribution modes listed below. The selected mode will be shown in the display.

: Distributes air through the instrument panel and center console

vents (if equipped).

: Distributes air through the instrument panel, floor and center

console vents (if equipped).

: Distributes air through the floor vents. Note: You may notice a

small amount of air flowing from the demister and defroster vents.

: Distributes air through the windshield defroster, demister and floor

Driver heated seat control: Press to heat the driver seat. Press

vents. 11. Manual override controls: Allows you to manually select where airflow is directed. To return to full automatic control, press AUTO. 12. once to activate high heat (two indicator lights). Press again to activate low heat (one indicator light). Press again to deactivate the driver heated seat. Note: The heated seat feature will remain on for approximately ten minutes. 13. decrease the fan speed. To return to automatic fan operation, press AUTO. 14. EXT: Press to display outside temperature. Press again to display cabin temperature settings. 15. F/C (Temperature conversions): Press to switch temperature display between ° Fahrenheit and ° Celsius. 16. OFF: Outside air is shut out and the climate control system is turned off.

Front fan speed control: Press to manually increase or

50

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Climate Controls

17. Driver temperature control: Press to increase/decrease the temperature on the driver side of the cabin. Sets the passenger side temperature also when DUAL is disengaged. The recommended vehicle cabin setting is between 72°F (22°C) and 75°F (24°C). 18. AUTO: Press to engage automatic temperature control. Select the desired temperature using the temperature control. The system will automatically determine fan speed, airflow location, A/C on or off, and outside or recirculated air, to heat or cool the vehicle to reach the desired temperature. 19. REAR: Press to enable the control located in the rear seat. Press again to turn the auxiliary system OFF.

AUXILIARY CLIMATE CONTROL (IF EQUIPPED) 1. Fan speed: Turn to select the desired fan speed. 2. Temperature/mode selection: The distribution of air from the overhead and floor registers is based on the temperature selected. Turn to select for comfort. To use the rear climate controls, ensure that REAR is pressed on the main climate control face located on the instrument panel.

REAR WINDOW DEFROSTER R The rear defroster control is located on the climate control panel and works to clear the rear window of fog and thin ice. The ignition must be in the 3 (RUN) position to operate the rear window defroster. The rear defroster turns off automatically after 10 minutes or when the ignition is turned to the 1 (LOCK) position. To manually turn off the defroster before 10 minutes have passed, push the control again. Do not use razor blades or other sharp objects to clean the inside of the rear window or to remove decals from the inside of the rear window. This may cause damage to the heated grid lines and will not be covered by your warranty.

51

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

P

Lights

HEADLAMP CONTROL Turns the lamps off. Turns on the parking lamps, instrument panel lamps, license plate lamps and tail lamps.

Turns the headlamps on.

Autolamp control (if equipped) The autolamp system provides light sensitive automatic on-off control of the exterior lights normally controlled by the headlamp control. • To turn autolamps on, rotate the • To turn autolamps off, rotate the

control counterclockwise to

control clockwise to

The autolamp system also keeps the lights on for a predetermined amount of time after the ignition switch is turned to LOCK. You can change the amount of time the lamps stay on by using the programming procedure that follows: Autolamps - Programmable exit delay Programmable exit delay allows the length of the autolamp exit delay to be changed. To program the auto lamp exit time delay: 1. Start with the ignition in the LOCK position and the headlamp control in the autolamp position. 2. Turn the headlamp switch to 3. Turn the ignition switch to RUN and then back to LOCK. 4. Turn the headlamp switch to the autolamp position. The headlamps will turn on.

52

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

5. Wait the desired amount of time for the exit delay you want (up to . The headlamps three minutes), then turn the headlamp switch to will turn off.

Lights

Foglamp control (if equipped) With the ignition on, the foglamps can be turned on when the headlamp control is pulled toward you and is in any of the following positions: • Parking lamps • Low beams • Autolamps (when active) The foglamps will not operate when the high beams are active.

High beams Pull the lever towards you, to the second detent, to activate. Pull the lever towards you again to deactivate.

Flash to pass Pull toward you, to the first detent, to activate and release to deactivate.

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

53

Lights

Daytime running lamps (DRL) (if equipped) Turns the headlamps on with a reduced output. To activate: • the ignition must be in the ON position, • the headlamp control is in the OFF, autolamps or parking lamp • the transmission must be out of the Park position.

position and

Always remember to turn on your headlamps at dusk or during inclement weather. The Daytime Running Lamp (DRL) system

does not activate the tail lamps and generally may not provide adequate lighting during these conditions. Failure to activate your headlamps under these conditions may result in a collision.

PANEL DIMMER CONTROL Use to adjust the brightness of the instrument panel and all applicable switches in the vehicle during headlamp and parklamp operation. Move the control to the full upright position, past detent, to turn on the interior lamps.

AIMING THE HEADLAMPS The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident the alignment of your headlamps should be checked by your authorized dealer.

Vertical aim adjustment 1. Park the vehicle directly in front of a wall or screen on a level surface, approximately 25 feet (7.6 meters) away.

54

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Lights

ground

• (1) 8 feet (2.4 meters) • (2) Center height of lamp to • (3) 25 feet (7.6 meters) • (4) Horizontal reference line 2. Measure the height of the headlamp bulb center from the ground and mark an 8 foot (2.4
meter) horizontal reference line on the vertical wall or screen at this height (a piece of masking tape works well). 3. Turn on the low beam headlamps to illuminate the wall or screen and open the hood. To see a clearer light pattern for adjusting, you may want to block the light from one headlamp while adjusting the other. 4. On the wall or screen you will observe an area of high intensity light. The top of the high intensity area should touch the horizontal reference line, if not, the beam will need to be adjusted.

5. Locate the vertical adjuster on each headlamp. Using a Phillips #2
screwdriver, turn the adjuster either clockwise (to adjust down) or counterclockwise (to adjust up). The horizontal edge of the brighter light should touch the horizontal reference line. 6. Close the hood and turn off the lamps.

HORIZONTAL AIM IS NOT REQUIRED FOR THIS VEHICLE AND IS NON-ADJUSTABLE.

55

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Lights

TURN SIGNAL CONTROL • Push down to activate the left • Push up to activate the right turn

turn signal.

signal.

INTERIOR LAMPS

Dome lamps and map lamps The map lamps are located on the overhead console. Press the controls on either side of each map lamp to turn on the lamps.

Your vehicle may also have reading lamps within the rear dome lamp(s). Press the switches on either side of the dome lamp to turn on the lamps.

BULB REPLACEMENT

Headlamp Condensation The headlamps are vented to equalize pressure. When moist air enters the headlamp(s) through the vents, there is a possibility that condensation can occur. This condensation is normal and will clear within 45 minutes of headlamp operation.

56

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Lights

Using the right bulbs Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized “D.O.T.” for North America and an “E” for Europe to ensure lamp performance, light brightness and pattern and safe visibility. The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb burn time.

Function

Number of bulbs

Front park/turn lamp

Trade number 3157AK or

3157A (amber)

9008 H13

168

Front sidemarker lamp Headlamp Tail/brake/turn signal lamp Backup lamp License plate lamp High-mount brake lamp Foglamp (if equipped) Map lamp Dome/reading lamps All replacement bulbs are clear in color except where noted. To replace all instrument panel lights - see your authorized dealer.

4057K 3156
168
W5W H11 LL 12V6W

578

Replacing exterior bulbs Check the operation of all the bulbs frequently.

Replacing headlamp (high/low beam) bulbs 1. Make sure headlamp switch is in the OFF position, then open the hood. 2. Reach behind the headlamp assembly to access the bulb sockets and connectors.

57

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Lights

3. Locate the outboardmost electrical connector and remove it by releasing the locking tab and pulling it off. 4. Remove the bulb socket by turning it counterclockwise and pulling it straight out.

Handle a halogen headlamp bulb carefully and keep out of children’s reach. Grasp the bulb only by its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated.

Install the new bulb(s) in reverse order. Replacing front parking lamp/turn signal bulbs 1. Make sure headlamp switch is in the OFF position, then open the hood. 2. Reach behind the headlamp assembly to access the bulb sockets and connectors. 3. Remove the bulb socket by turning it counterclockwise and pulling it straight out. 4. To remove the bulb, pull it straight out of the bulb socket.

Install the new bulb(s) in reverse order. Replacing front sidemarker bulbs 1. Make sure headlamp switch is in the OFF position, then open the hood. 2. Reach behind the headlamp assembly to access the bulb sockets and connectors.

58

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Lights

3. Locate the front sidemarker lamp electrical connector and remove it by pulling it off. 4. Remove the bulb socket by turning it counterclockwise and pulling it straight out. 5. To remove the bulb, pull it straight out of the bulb socket.

Install the new bulb(s) in reverse order. Replacing stop/tail/turn/backup bulbs The stop, tail, turn and backup lamp bulbs are located in the tail lamp assembly. Follow the same steps to replace either bulb. 1. Make sure the headlamp switch is in the OFF position and open the liftgate. 2. Remove the two screws in the liftgate opening, then pull the lamp assembly away from the vehicle.

3. Remove the bulb socket by rotating it counterclockwise, then pulling it out of the lamp assembly. 4. Pull the bulb straight from the socket.

Install new bulb(s) in reverse order.

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

59

Lights

Replacing high-mount brake lamp bulbs 1. Make sure the ignition control is in the OFF position. 2. Remove the two screws. 3. Unclip the bulb holder from the reflector. 4. Pull the bulb straight out. Install in reverse order. Replacing license plate lamp bulbs 1. Make sure the headlamp switch is in the OFF position. 2. Remove the screw from the license plate lamp assembly and pull it down. 3. Remove bulb socket by turning counterclockwise. 4. Carefully pull the bulb out from the socket.

Install new bulb(s) in reverse order. Replacing foglamp bulbs 1. Make sure the foglamp switch is in the OFF position. 2. Remove the bulb socket from the foglamp by turning counterclockwise. 3. Disconnect the electrical connector. Install the new bulb in reverse order.

60

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

MULTI-FUNCTION LEVER Windshield wiper: For intermittent operation, move control up one position. Adjust the rotary control to the desired speed setting. Mist function: To activate mist, push control down from the OFF position and release to get one wipe.

For normal or low speed wiper operation, move control up two positions from OFF. For high speed wiper operation, move control up three positions from OFF.

Windshield washer: Pull the end of the stalk towards you: • briefly: causes a single swipe of the wipers without washer fluid. • a quick pull and hold: the wipers

will swipe three times with washer fluid.

• a long pull and hold: the wipers and washer fluid will be activated for

up to ten seconds.

61

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

Rear window wiper/washer controls For rear wiper operation, rotate the rear window wiper and washer control to the desired position. Select: 2 — Three to four second interval rear wiper. 1 — Ten second interval rear wiper. O — Rear wiper and washer off. For rear wash cycle, rotate (and hold as desired) the rear wiper/washer control to either From either position, the control will automatically return to the 2 or O (Off) position. Rear heated wiper blades: The wiper blades are heated automatically to reduce ice buildup and activates when the vehicle is started. The wiper rests are designed to operate regardless of the geographic location of the vehicle. There is no switch to turn on, or other operator involvement required other than to start the vehicle.

position.

TILT STEERING WHEEL To adjust the steering wheel: 1. Pull down and hold the steering wheel release control. 2. Move the steering wheel up or down until you find the desired location. 3. Pull the steering wheel release control up. This will lock the steering wheel in position.

Never adjust the steering wheel when the vehicle is moving.

62

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

ILLUMINATED VISOR MIRROR (IF EQUIPPED) Lift the mirror cover to turn on the visor mirror lamp. The visor will slide back and forth on the rod for increased sunlight coverage.

Slide on rod feature Rotate the visor towards the side window and extend it rearward for additional sunlight coverage. Note: To stow the visor back into the headliner, visor must be retracted before moving it back towards the windshield.

INSTRUMENT PANEL STORAGE COMPARTMENT The storage compartment may be used to secure sunglasses or similar sized objects. Press the control to open the storage compartment.

OVERHEAD CONSOLE The appearance of your vehicle’s overhead console will vary according to your option package.

63

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

Storage compartment Press the latch to open the storage compartment. The door will open slightly and can be moved to full open. The storage compartment may be used to secure sunglasses or a similar object.

Conversation mirror (if equipped) The conversation mirror allows the driver to view the rear seating area. This does not replace the rear view mirror. Pull down on the housing to lock it in place. Adjust the mirror, as needed, in any direction. The rear view mirror may have to be adjusted to its lower arm position to prevent interference when the conversation mirror is extended down. CENTER CONSOLE Your vehicle may be equipped with a variety of console features. These include: • Utility compartment with power • Gear Shift • Cup holders • Rear vent and cup holders (if

point

PULL DOWN TO LOCK

equipped)

Use only soft cups in the cupholder. Hard objects can injure you in a collision.

64

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

Second row center console features (if equipped) The second row center console incorporates the following features: • Utility compartment • Cupholders • Flip forward armrest to provide a

flat load floor

Use only soft cups in the cupholder. Hard objects can

injure you in a collision.

AUXILIARY POWER POINT (12VDC) Power outlets are designed for accessory plugs only. Do not insert any other object in the power outlet as this will damage the outlet and blow the fuse. Do not hang any type of accessory or accessory bracket from the plug. Improper use of the power outlet can cause damage not covered by your warranty. The auxiliary power points are located on the instrument panel, in the center console utility compartment and on the left-hand trim panel. Do not use the power point for operating the cigarette lighter element (if equipped). To prevent the fuse from being blown, do not use the power point(s) over the vehicle capacity of 12 VDC/180W. To prevent the battery from being discharged, do not use the power point longer than necessary when the engine is not running. Always keep the power point caps closed when not being used. Cigar/Cigarette lighter (if equipped) Do not plug optional electrical accessories into the cigarette lighter socket.

65

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

Do not hold the lighter in with your hand while it is heating, this will damage the lighter element and socket. The lighter will be released from its heating position when it is ready to be used. Improper use of the lighter can cause damage not covered by your warranty.

POWER WINDOWS

Do not leave children unattended in the vehicle and do not let children play with the power windows. They may seriously injure

themselves.

When closing the power windows, you should verify they are free of obstructions and ensure that children and/or pets are not in

the proximity of the window openings.

Press and pull the window switches to open and close windows. • Push down (to the first detent) • Pull up (to the first detent) and

and hold the switch to open.

hold the switch to close.

AUTO

One touch up or down This feature is present on the driver’s window only. To operate ONE TOUCH DOWN: • Press the switch completely down to the second detent and release quickly. The driver’s window will open fully. Momentarily press the switch to any position to stop the window operation.

If the switch is pressed and held to the normal close or ONE TOUCH UP position during a ONE TOUCH DOWN event, the window will stop. If, after 1/2 second the switch is still held, the window will perform a normal close or ONE TOUCH UP.

66

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

To operate ONE TOUCH UP: • Pull the switch completely up to the second detent and release quickly. The driver’s window will close fully. Momentarily press the switch to any position to stop the one touch up.

If the switch is pressed and held to the normal open or ONE TOUCH DOWN position during a ONE TOUCH UP event, the window will stop. If, after 1/2 second the switch is still held, the window will perform a normal open or ONE TOUCH DOWN.

Window lock The window lock feature allows only the driver to operate the power windows. To lock out all the window controls except for the driver’s press the right side of the control. Press the left side to restore the window controls.

Bounce-Back (Driver’s window only) When an obstacle has been detected in the window opening as the window is moving upward, the window will automatically reverse direction and move down. This is known as “bounce-back”. If the ignition is turned OFF (without accessory delay being active) during bounce-back, the window will move down until the bounce back position is reached.

Security Override If during a bounce-back condition, the switch is released to the neutral position, then held in the one touch up position within two seconds after the window reaches the bounce-back position, the window will travel up with no bounce-back protection. If the switch is released before the window reaches fully closed or the ignition is turned OFF (without accessory delay being active), the window will stop. Security override can be used if the window movement is restricted in some way, for example, if there is ice on the window or seals.

67

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

Accessory delay With accessory delay, the radio, Family Entertainment DVD System (if equipped), power windows, and moonroof (if equipped) operate for up to ten minutes after the ignition switch is turned from the ON to the OFF position or until one of the front doors are opened.

AUTOMATIC DIMMING INSIDE REAR VIEW MIRROR (IF EQUIPPED) Your vehicle may be equipped with an inside rear view mirror with an auto-dimming function. The electronic day/night mirror will change from the normal (high reflective) state to the non-glare (darkened) state when bright lights (glare) reach the mirror. When the mirror detects bright light from behind the vehicle, it will automatically adjust (darken) to minimize glare. The mirror will automatically return to the normal state whenever the vehicle is placed in R (Reverse) to ensure a bright clear view when backing up. Do not block the sensor on the backside of the inside rear view mirror since this may impair proper mirror performance.

EXTERIOR MIRRORS

Power side view mirrors To adjust your mirrors: 1. Rotate the control clockwise to adjust the right mirror and rotate the control counterclockwise to adjust the left mirror. 2. Move the control in the direction you wish to tilt the mirror. 3. Return to the center position to lock mirrors in place.

68

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

Fold-away mirrors Pull the side mirrors in carefully when driving through a narrow space, like an automatic car wash.

(if equipped)

Heated outside mirrors Both mirrors are heated automatically to remove ice, mist and fog when the rear window defrost is activated. Do not remove ice from the mirrors with a scraper or attempt to readjust the mirror glass if it is frozen in place. These actions could cause damage to the glass and mirrors.

POWER ADJUSTABLE FOOT PEDALS (IF EQUIPPED) The accelerator and brake pedal should only be adjusted when the vehicle is stopped and the gearshift lever is in the P (Park) position. Press and hold the rocker control (located on the instrument panel) to adjust accelerator and brake pedal. • Press the top of the control to • Press the bottom of the control to adjust the pedals towards you. The adjustment allows for approximately 2.8 inches (71 mm) of maximum travel.

adjust the pedals away from you.

Never adjust the accelerator and brake pedal with feet on the pedals while the vehicle is moving.

69

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

Memory feature (if equipped) The accelerator and brake pedal positions are saved when doing a memory set function and can be recalled along with the vehicle personality features when a memory position is selected through the remote entry transmitter, keyless entry keypad or memory switch on the driver’s door (if equipped with memory feature). Refer to Memory seats/mirrors/adjustable pedals in the Seating and Safety Restraints chapter.

SPEED CONTROL With speed control set, you can maintain a speed of 30 mph (48 km/h) or more without keeping your foot on the accelerator pedal. Speed control does not work at speeds below 30 mph (48 km/h).

Do not use the speed control in heavy traffic or on roads that are winding, slippery or unpaved.

OFF

ON

CNCL

RSM

SET

SET

OFF

ON

CNCL

RSM

SET

SET

Setting speed control The controls for using your speed control are located on the steering wheel for your convenience. 1. Press the ON control and release it. 2. Accelerate to the desired speed.

3. Press the SET + control and release it. 4. Take your foot off the accelerator pedal. 5. The indicator instrument cluster will turn on.

light on the

70

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

steep hill.

Note: • Vehicle speed may vary momentarily when driving up and down a • If the vehicle speed increases above the set speed on a downhill, you • If the vehicle speed decreases more than 10 mph (16 km/h) below

may want to apply the brakes to reduce the speed.

your set speed on an uphill, your speed control will disengage.

Disengaging speed control To disengage the speed control: • Depress the brake pedal or press CNCL (Cancel). Disengaging the speed control will not erase previous set speed. Resuming a set speed Press the RES control and release it. This will automatically return the vehicle to the previously set speed. The RES control will not work if the vehicle speed is not faster than 30
mph (48 km/h).

CNCL

RSM

OFF

ON

SET

Increasing speed while using speed control There are two ways to set a higher speed: • Press and hold the SET + control until you get to the desired speed, then release the control. You can also use the SET + control to operate the Tap-Up function. Press and release this control to increase the vehicle set speed in small amounts by 1 mph (1.6 km/h).

SET

OFF

ON

CNCL

RSM

SET

SET

• Use the accelerator pedal to get to the desired speed. When the vehicle reaches that speed press and release the SET + control.

71

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

OFF

ON

CNCL

RSM

SET

SET

OFF

ON

CNCL

RSM

SET

SET

OFF

ON

CNCL

RSM

SET

SET

Driver Controls

Reducing speed while using speed control There are two ways to reduce a set speed: • Press and hold the SET - control until you get to the desired speed, then release the control. You can also use the SET - control to operate the Tap-Down function. Press and release this control to decrease the vehicle set speed in small amounts by 1
mph (1.6 km/h). • Depress the brake pedal or press CNCL (Cancel) until the desired vehicle speed is reached, press the SET + control.

Turning off speed control There are two ways to turn off the speed control: • Depress the brake pedal or press CNCL (Cancel). This will not erase your vehicle’s previously set speed.

• Press the speed control OFF

control.

Note: When you turn off the speed control or the ignition, your speed control set speed memory is erased.

72

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

STEERING WHEEL CONTROLS (IF EQUIPPED) Radio control features • Press MEDIA to select AM, FM1,

FM2, or CD (if equipped).

In Radio mode: • Press SEEK to access the

next/previous strong station.

In CD mode: • Press SEEK to listen to the next

track on the disc.

In any mode: • Press VOL up or down to adjust • Press MUTE to mute the volume.

the volume.

VOL

SEEK

MEDIA

MUTE

VOL

SEEK

MEDIA

MUTE

MOON ROOF (IF EQUIPPED) You can move the glass panel of the moon roof back to open or tilt up to ventilate the vehicle.

Do not let children play with the moon roof or leave children unattended in the vehicle. They may seriously hurt themselves.

73

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

To open the moon roof: The moon roof is equipped with an automatic, one-touch, express opening and closing feature. To stop motion at any time during the one-touch operation, press the control a second time. To open the moon roof, press and release the rear portion of the control.

When closing the moon roof, you should verify that it is free of obstructions and ensure that children and/or pets are not in the

proximity of the moon roof opening.

To close the moon roof: To close, press and release the front portion of the control. To vent: To tilt the moon roof into the vent position (when the glass panel is closed), press and hold the middle portion of the control. To close the moon roof from the vent position, press and hold the front portion of the control until the glass panel stops moving. The moon roof has a sliding shade that can be opened or closed when the glass panel is shut. To close the shade, pull it toward the front of the vehicle HOMELINK姞 WIRELESS CONTROL SYSTEM (IF EQUIPPED) The HomeLink威 Wireless Control System, located on the driver’s visor, provides a convenient way to replace up to three hand-held transmitters with a single built-in device. This feature will learn the radio frequency codes of most transmitters to operate garage doors, entry gate operators, security systems, entry door locks, and home or office lighting.

When programming your HomeLink威 Wireless Control System to a garage door or gate, be sure that people and objects are out of

the way to prevent potential harm or damage.

74

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

Do not use the HomeLink威 Wireless Control System with any garage door opener that lacks safety stop and reverse features as required by U.S. federal safety standards (this includes any garage door opener model manufactured before April 1, 1982). A garage door which cannot detect an object, signaling the door to stop and reverse, does not meet current U.S. federal safety standards. For more information, contact HomeLink威 at: www.homelink.com or 1–800–355–3515. Retain the original transmitter for use in other vehicles as well as for future programming procedures (i.e. new HomeLink威 equipped vehicle purchase). It is also suggested that upon the sale of the vehicle, the programmed Homelink威 buttons be erased for security purposes, refer to Programming in this section.

Programming Do not program HomeLink威 with the vehicle parked in the garage. Note: Your vehicle may require the ignition switch to be turned to the ACC position for programming and/or operation of the HomeLink威. It is also recommended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLink威 for quicker training and accurate transmission of the radio-frequency signal. 1. Press and hold the two outside buttons releasing only when the indicator light begins to flash after 20 seconds. Do not repeat Step 1
to program additional hand-held transmitters to the remaining two HomeLink威 buttons. This will erase previously programmed hand-held transmitter signals into HomeLink威. 2. Position the end of your hand-held transmitter 1–3 inches (2–8 cm) away from the HomeLink威 button you wish to program (located on your visor) while keeping the indicator light in view.

75

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

3. Simultaneously press and hold both the HomeLink威 and hand-held transmitter button. Do not release the buttons until Step 4 has been completed. Some entry gates and garage door openers may require you to replace Step 3 with procedures noted in the “Gate Operator and Canadian Programming” in this section for Canadian residents. 4. The indicator light will flash slowly and then rapidly. Release both buttons when the indicator light flashes rapidly. (The rapid flashing light indicates acceptance of the hand-held transmitters’ radio frequency signals.) 5. Press and hold the just-trained HomeLink威 button and observe the indicator light. If the light is constant, programming is complete and your device should activate when the HomeLink威 button is pressed and released. Note: To program the remaining two HomeLink威 buttons, begin with Step 2 in the “Programming” section — do not repeat Step 1. Note: If the indicator light blinks rapidly for two seconds and then turns to a continuous red, proceed with Steps 6 through 8 to complete programming of a rolling code equipped device. 6. At the garage door opener receiver (motor-head unit) in the garage, locate the “learn” or “smart” button (usually near where the hanging antenna wire is attached to the unit). 7. Press and release the “learn” or “smart” button. (The name and color of the button may vary by manufacturer.) Note: There are 30 seconds in which to initiate Step 8. 8. Return to the vehicle and firmly press, hold for two seconds and release the HomeLink威 button. Repeat the press/hold/release sequence again, and, depending on the brand of the garage door opener (or other rolling code equipped device), repeat this sequence a third time to complete the programming. HomeLink威 should now activate your rolling code equipped device. To program additional HomeLink威 buttons begin with Step 2 in the “Programming” section. For questions or comments, please contact HomeLink at www.homelink.com or 1–800–355–3515.

76

2006 Freestyle (219) Owners Guide (post-2002-fmt) USA (fus)

Driver Controls

Gate Operator & Canadian Programming During programming, your hand-held transmitter may automatically stop transmitting — not allowing enough time for HomeLink威 to accept the signal from the hand-held transmitter. After completing Steps 1 and 2
outlined in the “Programming” section, replace Step 3 with the following: Note: If programming a garage door opener or gate operator, it is advised to unplug the device during the “cycling” process to prevent overheating. • Continue to press and hold the HomeLink威 button (note Step 3 in the

“Programming” section) while you press and release — every two seconds (“cycle”) your hand-held transmitter until the frequency signal has been accepted by the HomeLink威. The indicator light will flash slowly and then rapidly after HomeLink威 accepts the radio frequency signal.

• Proceed with Step 4 in the “Programming” section.

Operating the HomeLink姞 Wireless Control System To operate, simply press and release the appropriate HomeLink威 button. Activation will now occur for the trained product (garage door, gate operator, security system, entry door lock, or home or office lighting etc.). For convenience, the hand-held transmitter of the device may also be used at any time. In the event that there are still programming difficulties, contact HomeLink威 at www.homelink.com or