2014 Focus (foc)
Owners Guide gf, 3rd Printing, February 2014
USA (fus)
290
Wheels and Tires
TECHNICAL SPECIFICATIONS
Wheel Lug Nut Torque Specifications
WARNING: When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting
surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel. Make sure that any fasteners that attach the rotor to the hub are secured so they do not interfere with the mounting surfaces of the wheel. Installing wheels without correct metal-to-metal contact at the wheel mounting surfaces can cause the wheel nuts to loosen and the wheel to come off while the vehicle is in motion, resulting in loss of control.
Retighten the lug nuts to the specified torque within 100 miles (160 kilometers) after any wheel disturbance (such as tire rotation, changing a flat tire, wheel removal).
Bolt size
M12 x 1.5
Wheel lug nut torque*
N•m
135
ft-lb
100
* Torque specifications are for nut and bolt threads free of dirt and rust. Use only Ford recommended replacement fasteners.
Note: Inspect the wheel pilot bore and mounting surface prior to installation. Remove any visible corrosion or loose particles.
2014 Focus (foc)
Owners Guide gf, 3rd Printing, February 2014
USA (fus)
Capacities and Specifications
291
ENGINE SPECIFICATIONS Engine Cubic inches Required fuel Firing order Ignition system Compression ratio Spark plug gap
2.0L GDI engine
121
Minimum 87 octane or E85
1–3–4–2
Coil On Plug
12.0:1
.035 +/ - .001 in.
(0.9 +/- .05 mm)
Engine Drivebelt Routing 2.0L GDI
2014 Focus (foc)
Owners Guide gf, 3rd Printing, February 2014
USA (fus)
292
Capacities and Specifications
–
—
—
2014 Focus (foc)
Owners Guide gf, 3rd Printing, February 2014
USA (fus)
Capacities and Specifications
293
—
—
2014 Focus (foc)
Owners Guide gf, 3rd Printing, February 2014
USA (fus)
294