2014 Ford Focus Owners Manual

2014 Focus (foc) Owners Guide gf, 3rd Printing, February 2014
USA (fus)

290

Wheels and Tires

TECHNICAL SPECIFICATIONS

Wheel Lug Nut Torque Specifications

WARNING: When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting

surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel. Make sure that any fasteners that attach the rotor to the hub are secured so they do not interfere with the mounting surfaces of the wheel. Installing wheels without correct metal-to-metal contact at the wheel mounting surfaces can cause the wheel nuts to loosen and the wheel to come off while the vehicle is in motion, resulting in loss of control.

Retighten the lug nuts to the specified torque within 100 miles (160 kilometers) after any wheel disturbance (such as tire rotation, changing a flat tire, wheel removal).

Bolt size

M12 x 1.5

Wheel lug nut torque*

N•m 135

ft-lb 100

* Torque specifications are for nut and bolt threads free of dirt and rust. Use only Ford recommended replacement fasteners.

Note: Inspect the wheel pilot bore and mounting surface prior to installation. Remove any visible corrosion or loose particles.

2014 Focus (foc) Owners Guide gf, 3rd Printing, February 2014
USA (fus)

Capacities and Specifications

291

ENGINE SPECIFICATIONS Engine Cubic inches Required fuel Firing order Ignition system Compression ratio Spark plug gap

2.0L GDI engine 121
Minimum 87 octane or E85
1–3–4–2
Coil On Plug 12.0:1
.035 +/ - .001 in. (0.9 +/- .05 mm)

Engine Drivebelt Routing 2.0L GDI

2014 Focus (foc) Owners Guide gf, 3rd Printing, February 2014
USA (fus)

292

Capacities and Specifications

–

—

—

2014 Focus (foc) Owners Guide gf, 3rd Printing, February 2014
USA (fus)

Capacities and Specifications

293

—

—

2014 Focus (foc) Owners Guide gf, 3rd Printing, February 2014
USA (fus)

294