Download PDF Manual

60 A 60 A 40 A 30 A 30 A 60 A 60 A


20 A 15 A 20 A 15 A 7.5 A 15 A 20 A


Stability assist.


Anti-lock brake system.1
Transmission control module. Cooling fan.


Cooling fan module.3
Blower motor. Passenger compartment fuse box supply. Central locking system. Ignition switch. Powertrain control module. Stability assist module. Engine start inhibitor. Fuel system. Power windows.


High-speed cooling fan.2
Not used. Not used. Not used. High beam. Powertrain control module. Front fog lamps. Emissions system. High beam. Ignition coil.


Ignition coil.3


169


Fiesta (CCT), enUSA, Second Printing


Fuse 23
24
25


26


27


28
29
30
31


32


33


34
35
36
37
38
39
40
41
42
43


Fuses


Fuse rating


Circuits protected


15 A 10 A 15 A


20 A


7.5 A


15 A


15 A 20 A 10 A


7.5 A


10 A 7.5 A 30 A 10 A 10 A 10 A 10 A


Right-hand exterior lamps. Emissions system. Left-hand exterior lamps. Horn. Battery back-up sounder. Interior lamps.


Engine cold start system module.4


Water pump.2
Active grill shutter.2
Direction indicators.


Compressed natural gas, fuel control module.1
Air conditioning clutch. Not used. Powertrain control module. Transmission control unit. Fuel injectors.


Mass air flow sensor.3
Heated exterior mirrors. Left-hand fog lamp. Right-hand fog lamp. Left-hand high beam. Right-hand high beam. Not used. Not used. Not used. Not used. Not used.


170


Fiesta (CCT), enUSA, Second Printing


Fuses


Fuse 44
45
46


Fuse rating


Circuits protected


Not used. Not used. Not used.


1 If equipped. 2 1.0L EcoBoost. 3 1.0L and 1.6L EcoBoost. 4 1.6L Flex-fuel


Relay


Circuits switched


R1
R2
R3
R4
R5
R6
R7
R8
R9
R10
R11
R12
R13


Compressed natural gas fuel system.1
Not used. Powertrain control module. Blower motor.


Cooling fan.1
Air conditioning clutch.


High-speed cooling fan.2
Not used. Engine start inhibitor. High beam. Front fog lamps.


Reversing lamp.3
Fuel pump.


171


Fiesta (CCT), enUSA, Second Printing


Circuits switched


Fuses


Relay R14
R15


Not used. Not used.


1 If equipped. 2 1.0L and 1.6L EcoBoost. 3 6-Speed PowerShift Transmission.


Passenger Compartment Fuse Box This fuse box is located behind the glove box. Open the glove box and empty the contents. Press the sides inwards and swivel the glove box downward.


172


Fiesta (CCT), enUSA, Second Printing


Fuses


Fuse


Fuse rating


Circuits protected


15 A


7.5 A


7.5 A


7.5 A


Ignition switch. Auto-dimming interior mirror. Autowipers. Heater relay control. Instrument cluster. Passenger airbag deactivation indicator. Passenger sensing system.


173


Fiesta (CCT), enUSA, Second Printing


E156756 Fuses


Fuse


Fuse rating


Circuits protected


10


11
12
13


14


15


16


17
18
19
20


21


22


23
24


15 A 10 A


7.5 A


7.5 A


20 A


15 A


20 A 7.5 A 15 A


20 A


15 A


5 A


15 A 10 A 7.5 A 10 A


7.5 A


7.5 A


7.5 A 7.5 A


On-board diagnostics connector. Reversing lamps. Instrument panel. Information and entertainment display. Moonroof. Remote keyless entry. Remote keyless starting. Audio unit. SYNC module. Windshield wipers. Climate control. Rear window wiper. Remote keyless entry. Remote keyless starting. Windshield wipers. Exterior mirrors. Power windows. Heated seats. Brake lamp. Instrument cluster. Airbags Electronic power assist steering. Instrument cluster. Ignition. Windshield wipers. Passive anti-theft system. Transmission control unit. Powertrain control module. Anti-lock brake system. Stability assist. Transmission control unit. Audio unit.


174


Fiesta (CCT), enUSA, Second Printing


Fuses


Circuits protected


Exterior mirrors. Central locking system. Not used. Not used. Not used. Not used. Power windows. Battery back-up sounder. Auxiliary power points. Power windows. Moonroof. Not used.


Fuse 25
26
27
28
29
30
31
32
33
34
35
36


Fuse rating


7.5 A 7.5 A


30 A 20 A 20 A 30 A 20 A


Relay


R1
R2
R3
R4
R5
R6
R7
R8
R9


Circuits switched


Ignition relay. Not used. Not used. Driver heated seat. Passenger heated seat. Remote keyless starting. Remote keyless starting. Battery back-up sounder. Accessory delay.


175


Fiesta (CCT), enUSA, Second Printing


Fuses


CHANGING A FUSE Fuses


WARNING


Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire.


If electrical components in the vehicle are not working, a fuse may have blown. Blown fuses are identified by a broken wire within the fuse. Check the appropriate fuses before replacing any electrical components.


Standard Fuse Amperage Rating and Color


Color


Fuse rating


Micro fuses


Dual micro fuses


M-type fuses


J-type fuses


Grey


Light Blue


White Pink Green


Blue White Pink Green Red Yellow


5A 7.5A 10A 15A 20A 25A 30A 40A 50A 60A


Tan Brown Red Blue Yellow White Green


Fiesta (CCT), enUSA, Second Printing


Tan Brown Red Blue


176


E142430 Maintenance


Working with the Engine Off 1. Set the parking brake and shift to park


(P).


2. Switch off the engine. 3. Block the wheels. Working with the Engine On


WARNING


To reduce the risk of vehicle damage and/or personal burn injuries, do not start your engine with the air cleaner


removed and do not remove it while the engine is running.


1. Set the parking brake and shift to park


(P).


2. Block the wheels OPENING AND CLOSING THE HOOD Opening the Hood


GENERAL INFORMATION Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of authorized dealers that are there to help you with their professional servicing expertise. We believe that their specially trained technicians are best qualified to service your vehicle properly and expertly. They are supported by a wide range of highly specialized tools developed specifically for servicing your vehicle. To help you service your vehicle, we provide scheduled maintenance information which makes tracking routine service easy. See Scheduled Maintenance (page 396). If your vehicle requires professional service, an authorized dealer can provide the necessary parts and service. Check your warranty information to find out which parts and services are covered. Use only recommended fuels, lubricants, fluids and service parts conforming to specifications. Motorcraft® parts are designed and built to provide the best performance in your vehicle. Precautions • Do not work on a hot engine. • Make sure that nothing gets caught in


moving parts.


• Do not work on a vehicle with the


engine running in an enclosed space, unless you are sure you have enough ventilation. Keep all open flames and other burning material (such as cigarettes) away from the battery and all fuel related parts.



1. Pull the hood release lever. 2. Slightly lift the hood.


177


Fiesta (CCT), enUSA, Second Printing


E102165 Maintenance


3. Move the catch to the left to release


the hood.


4. Open the hood and support it with the


hood strut.


Closing the Hood 1. Remove the hood strut from the catch


and secure it correctly in the clip.


2. Lower the hood and allow it to drop under its own weight for the last 8-12
in (20-30 cm).


Note: Make sure that the hood is correctly closed.


178


Fiesta (CCT), enUSA, Second Printing


E163236E87786 Maintenance


UNDER HOOD OVERVIEW - 1.0L ECOBOOST™


Engine coolant reservoir*: See Engine Coolant Check (page 183). Engine oil filler cap*: See Engine Oil Check (page 182). Battery: See Changing the 12V Battery (page 186). Brake and clutch fluid reservoir*: See Brake Fluid Check (page 186). Engine compartment fuse box: Windshield and rear window washer fluid reservoir: See Washer Fluid Check (page 186). Air cleaner: See Changing the Engine Air Filter (page 199). Engine oil dipstick*: See Engine Oil Check (page 182).


* The filler caps and the engine oil dipstick are colored for easy identification.


179


Fiesta (CCT), enUSA, Second Printing


E163005ABCDEGHF Maintenance


UNDER HOOD OVERVIEW - 1.6L DURATEC-16V TI-VCT (SIGMA)


Engine coolant reservoir*: See Engine Coolant Check (page 183). Engine oil filler cap*: See Engine Oil Check (page 182). Battery: See Changing the 12V Battery (page 186). Brake and clutch fluid reservoir : See Brake Fluid Check (page 186). Engine compartment fuse box: Windshield and rear window washer fluid reservoir: See Washer Fluid Check (page 186). Air cleaner: See Changing the Engine Air Filter (page 199). Engine oil dipstick*: See Engine Oil Check (page 182).


* The filler caps and the engine oil dipstick are colored for easy identification.


180


Fiesta (CCT), enUSA, Second Printing


E163006ABCDHGFE Maintenance


UNDER HOOD OVERVIEW - 1.6L ECOBOOST™


Engine coolant reservoir*: See Engine Coolant Check (page 183). Engine oil filler cap*: See Engine Oil Check (page 182). Engine oil dipstick*: See Engine Oil Check (page 182). Battery: See Changing the 12V Battery (page 186). Brake and clutch fluid reservoir*: See Brake Fluid Check (page 186). Engine compartment fuse box: Windshield and rear window washer fluid reservoir: See Washer Fluid Check (page 186). Air cleaner: See Changing the Engine Air Filter (page 199).


* The filler caps and the engine oil dipstick are colored for easy identification.


181


Fiesta (CCT), enUSA, Second Printing


ABCDFGHEE163007 Maintenance


ENGINE OIL DIPSTICK - 1.0L ECOBOOST™


ENGINE OIL DIPSTICK - 1.6L ECOBOOST™


Minimum Maximum


ENGINE OIL DIPSTICK - 1.6L DURATEC-16V TI-VCT (SIGMA)


Minimum Maximum


182


Fiesta (CCT), enUSA, Second Printing


Minimum Maximum


ENGINE OIL CHECK 1. Make sure that your vehicle is on level


ground.


2. Check the oil level before starting the


engine, or switch the engine off and wait 15 minutes for the oil to drain into the oil pan.


3. Remove the dipstick and wipe it with


a clean, lint free cloth. Replace the dipstick and remove it again to check the oil level.


If the oil level is at the minimum mark, add oil immediately. See Maintenance (page 177). Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty. Note: Make sure that the oil level is between the minimum and the maximum marks. Note: The oil consumption of new engines reaches its normal level after approximately 3000 mi (5,000 km).


E141337ABE188072ABABE134114 Maintenance


Adding Engine Oil


Only use oils certified for gasoline engines by the American Petroleum Institute (API). An oil with this trademark symbol conforms to the current engine and emission system protection standards and fuel economy requirements of the International Lubricants Specification Advisory Council (ILSAC), comprised of U.S. and Japanese automobile manufacturers.


WARNINGS


Only add oil when the engine is cold. If the engine is hot, wait 10 minutes for the engine to cool down. Do not remove the filler cap when the engine is running.


1. Remove the engine oil filler cap. 2. Add engine oil that meets Ford


specifications. See Maintenance (page 177).


3. Wipe off any spilled oil. 4. Replace the engine oil filler cap. Turn


it clockwise until you feel a strong resistance.


Note: Do not add oil further than the maximum mark. Oil levels above the maximum mark may cause engine damage. Note: Soak up any spillage with an absorbent cloth immediately.


OIL CHANGE INDICATOR RESET Resetting the Oil Life Monitoring System Only reset the oil life monitoring system after changing the engine oil and oil filter. 1. Switch the ignition on. Do not start the engine. For vehicles with push-button start, press and hold the start button for two seconds without pressing the brake pedal. Do not start the engine.


2. Press the accelerator and brake pedals


at the same time.


3. Keep the accelerator and brake pedals


fully pressed.


4. After three seconds, a message


confirming that the reset is in progress will be displayed.


5. After 25 seconds, a message


confirming that the reset is complete will be displayed.


6. Release the accelerator and brake


pedals.


7. The message confirming that the reset is complete will no longer be displayed. 8. Switch the ignition off. For vehicles with


push-button start, press the start button to switch the ignition off. ENGINE COOLANT CHECK Checking the Engine Coolant When the engine is cold, check the concentration and level of the engine coolant at the intervals listed in the scheduled maintenance information. See Scheduled Maintenance (page 396). Note: Make sure that the level is between the MIN and MAX marks on the coolant reservoir.


183


Fiesta (CCT), enUSA, Second Printing


E142732 Maintenance


Note: Coolant expands when it is hot. The level may extend beyond the MAX mark. Note: If the level is at the MIN mark, below the MIN mark, or empty, add coolant immediately. See Adding Engine Coolant in this chapter. Maintain coolant concentration within 48% to 50%, which equates to a freeze point between -30°F (-34°C) and -34°F (-37°C). Note: For best results, coolant concentration should be tested with a refractometer, for example Robinair® coolant and battery refractometer 75240. We do not recommend the use of hydrometers or coolant test strips for measuring coolant concentrations. Note: Automotive fluids are not interchangeable. Do not use engine coolant, antifreeze or windshield washer fluid outside of its specified function and vehicle location. Adding Engine Coolant WARNINGS


Do not add engine coolant when the engine is hot. Steam and scalding liquids released from a hot cooling system can burn you badly. Also, spilling coolant on hot engine parts can burn you.


Do not put engine coolant in the windshield washer fluid reservoir. If sprayed on the windshield, engine


coolant could make it difficult to see through the windshield.


Do not add coolant further than the MAX mark. To reduce the risk of personal injury, make sure the engine is cool before unscrewing the coolant pressure relief cap. The cooling system is under pressure; steam and hot liquid can come out forcefully when the cap is loosened slightly.


Note: Do not use stop leak pellets, cooling system sealants or additives as they can cause damage to the engine cooling or heating systems. The vehicle warranty does not cover this damage. Note: During normal vehicle operation, the engine coolant may change color from orange to pink or light red. As long as the engine coolant is clear and uncontaminated, this color change does not indicate that the engine coolant has degraded or that you drain the engine coolant, flush the system or replace the engine coolant. • Do not mix different colors or types of coolant in your vehicle. Make sure the correct coolant is used. Mixing of engine coolants may harm the engine’s cooling system. The use of incorrect coolant may harm engine and cooling system components and may void the warranty. Use prediluted engine coolant meeting the Ford specification. See Capacities and Specifications (page 241). In case of emergency, you can add a large amount of water without engine coolant in order to reach a vehicle service location. In this instance, you must have the cooling system drained, chemically cleaned with Motorcraft Premium Cooling System Flush, and refilled with engine coolant as soon as possible. Water alone (without engine coolant) can cause engine damage, for example corrosion, overheating or freezing.



• Do not use alcohol, methanol, brine or any engine coolants mixed with alcohol or methanol antifreeze. Alcohol and other liquids can cause engine damage, for example overheating or freezing.


• Do not add extra inhibitors or additives to the coolant. These can be harmful and compromise the corrosion protection of the engine coolant.


184


Fiesta (CCT), enUSA, Second Printing


Maintenance


Unscrew the cap slowly. Any pressure will escape as you unscrew the cap. Add prediluted engine coolant meeting the Ford specification. See Maintenance (page 177). Whenever you add coolant, check the coolant level in the coolant reservoir the next few times you drive the vehicle. If necessary, add enough prediluted engine coolant to bring the coolant level to the correct level. Recycled Engine Coolant We do not recommend the use of recycled engine coolant since a Ford-approved recycling process is not yet available. Used engine coolant should be disposed of in an appropriate manner. Follow your community’s regulations and standards for recycling and disposing of automotive fluids. Severe Climates If you drive in extremely cold climates: It may be necessary to have a Ford • authorized dealer increase the coolant concentration above 50%.


• A coolant concentration of 60% will


provide improved freeze point protection. Engine coolant concentrations above 60% will decrease the overheat protection characteristics of the engine coolant and may cause engine damage


If you drive in extremely hot climates: It may be necessary to have a Ford • authorized dealer decrease the coolant concentration to 40%.


• A coolant concentration of 40%


provides improved overheat protection. Engine coolant concentrations below 40% will decrease the freeze and corrosion protection characteristics of the engine coolant and may cause engine damage.


Vehicles driven year-round in non-extreme climates should use prediluted engine coolant for optimum cooling system and engine protection. AUTOMATIC TRANSMISSION FLUID CHECK Note: Transmission fluid should be checked by an authorized dealer. If required, fluid should be added by an authorized dealer. The automatic transmission does not have a transmission fluid dipstick. Have an authorized dealer check and change the transmission fluid at the correct service interval. See Scheduled Maintenance (page 396). Your transmission does not consume fluid. However, the fluid level should be checked if the transmission is not working properly, (i.e., if the transmission slips or shifts slowly) or if you notice some sign of fluid leakage. Do not use supplemental transmission fluid additives, treatments or cleaning agents. The use of these materials may affect transmission operation and result in damage to internal transmission components.


185


Fiesta (CCT), enUSA, Second Printing


Maintenance


Note: Where applicable you must reprogram the audio system using the keycode. The battery is located in the engine compartment. See Maintenance (page 177). CHECKING THE WIPER BLADES


Run the tip of your fingers over the edge of the blade to check for roughness. Clean the wiper blades with washer fluid or water applied with a soft sponge or cloth. CHANGING THE WIPER BLADES Windshield Wiper Blades Note: Do not hold the wiper blade when lifting the wiper arm. Note: Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached.


BRAKE FLUID CHECK Fluid levels between the MIN and MAX lines are within the normal operating range; there is no need to add fluid. If the fluid levels are outside of the normal operating range, the performance of the system could be compromised; seek service from your authorized dealer immediately. POWER STEERING FLUID CHECK Your vehicle is equipped with an electric power steering (EPS) system. There is no fluid reservoir to check or fill. WASHER FLUID CHECK Note: The reservoir supplies the front and rear washer systems. When adding fluid, use a mixture of washer fluid and water to help prevent freezing in cold weather and improve the cleaning capability. We recommend that you use only high quality washer fluid. For information on fluid dilution, refer to the product instructions. FUEL FILTER Your vehicle is equipped with a lifetime fuel filter that is integrated with the fuel tank. Regular maintenance or replacement is not needed. CHANGING THE 12V BATTERY


WARNING


For vehicles with start-stop the battery requirement is different. You must replace the battery with one of


exactly the same specification.


186


Fiesta (CCT), enUSA, Second Printing


E142463E7289912 Maintenance


ADJUSTING THE HEADLAMPS Vertical Aim Adjustment If your vehicle has been involved in an accident, have the alignment of your headlamps checked by an authorized dealer. Headlamp Aiming Target


1. Lift the wiper arm and then press the


wiper blade locking button.


2. Remove the wiper blade. 3. Install in the reverse order. Note: Make sure that the wiper blade locks into place. Rear Window Wiper Blade Note: Do not hold the wiper blade when lifting the wiper arm. Note: Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached. 1. Lift the wiper arm.


8 feet (2.4 meters) Center height of lamp to ground 25 feet (7.6 meters) Horizontal reference line


Vertical Aim Adjustment Procedure 1. Park your vehicle directly in front of a


wall or screen on a level surface, approximately 25 feet (7.6 meters) away.


2. Measure the height of the headlamp


bulb center from the ground and mark an 8 foot (2.4 meter) horizontal reference line on the vertical wall or screen at this height.


Note: To see a clearer light pattern for adjusting, you may want to block the light from one headlamp while adjusting the other.


2. Slightly rotate the wiper blade. 3. Disengage the wiper blade from the


wiper arm.


4. Remove the wiper blade. 5. Install in the reverse order. Note: Make sure that the wiper blade locks into place.


187


Fiesta (CCT), enUSA, Second Printing


E13006032E142592 Maintenance


3. Turn on the low beam headlamps to


illuminate the wall or screen and open the hood.


4. On the wall or screen you will observe


a flat zone of high intensity light located at the top of the right hand portion of the beam pattern. If the top edge of the high intensity light zone is not at the horizontal reference line, adjust the headlamp.


5. Locate the vertical adjuster on each


headlamp. Using a Phillips #2
screwdriver, turn the adjuster either clockwise or counterclockwise in order to adjust the vertical aim of the headlamp. The horizontal edge of the brighter light should touch the horizontal reference line.


6. Close the hood and turn the lamps off. Horizontal Aim Adjustment Horizontal aim is not required for this vehicle and is not adjustable. REMOVING A HEADLAMP 1. Open the hood. See Opening and


Closing the Hood (page 177).


2. Remove the screws.


188


Fiesta (CCT), enUSA, Second Printing


E142465E156848E1468782 Maintenance


Headlamp Note: Remove the covers to gain access to the bulbs.


Side marker Headlamp low beam Headlamp high beam Direction indicator


Side Marker 1. Remove the headlamp. See


Removing a Headlamp (page 188).


2. Remove the bulb holder. 3. Remove the bulb. Headlamp Low Beam 1. Remove the headlamp. See


Removing a Headlamp (page 188).


3. Disconnect the electrical connector. 4. Remove the headlamp. Note: When fitting the headlamp, make sure that you reconnect the electrical connector correctly. Note: When fitting the headlamp, make sure that you fully engage the headlamp in the retaining clips. CHANGING A BULB - 4-DOOR


WARNINGS


Switch the lamps and the ignition off.


Let the bulb cool down before removing it. Do not touch the glass of the bulb.


Note: Only fit bulbs of the correct specification. Note: The following instructions describe how to remove the bulbs. Fit replacements in the reverse order unless otherwise stated.


189


Fiesta (CCT), enUSA, Second Printing


E10259034BACDE159827E161707A Maintenance


Direction Indicator 1. Remove the headlamp. See


Removing a Headlamp (page 188).


2. Remove the cover. 3. Disconnect the electrical connector. 4. Release the clip and remove the bulb. Note: Do not touch the glass of the bulb. Headlamp High Beam 1. Remove the headlamp. See


Removing a Headlamp (page 188).


2. Turn the bulb holder counterclockwise


and remove it.


3. Gently press the bulb into the bulb holder, turn it counterclockwise and remove it.


Side Direction Indicator


2. Remove the cover. 3. Turn the bulb counterclockwise and


remove it.


Note: Do not touch the glass of the bulb.


190


Fiesta (CCT), enUSA, Second Printing


E14680342E14680423E146805312E112777 Maintenance


1. Press the side of the cover to release


the clips.


2. Remove the cover.


3. Remove the bulb and bulb holder.


Remove the bulb. Front Fog Lamps


Note: You cannot separate the fog lamp bulb from the bulb holder. 2. Using a suitable implement, remove


the cover.


3. Remove the screws. 4. Remove the lamp.


1. Remove the retaining clips to gain


access to the lamp assembly.


5. Disconnect the electrical connector.


191


Fiesta (CCT), enUSA, Second Printing


3E112778E1616651234E1616675E1616706 Maintenance


Reversing Lamp


6. Turn the bulb holder counterclockwise


and remove it.


Rear Lamps Brake, Tail and Direction Indicator Lamps 1. Remove the trim and disconnect the


electrical connector.


2. Loosen the wing nut and carefully pull


out the rear lamp.


1. Remove the trim panel and disconnect


the electrical connector.


3. Unclip the bulb holder and remove it. 4. Remove the bulb.


2. Loosen the wing nut and carefully pull


out the rear lamp.


192


Fiesta (CCT), enUSA, Second Printing


E161816132E161793A1E113384E161817 Maintenance


Interior Lamp


3. Turn the bulb holder counterclockwise


and remove it.


4. Remove the bulb. Center High Mounted Stop Lamp Note: The LED board is not a serviceable item, please consult your dealer if this fails. License Plate Lamp


1. Carefully remove the lamp. 2. Turn the bulb holder counterclockwise


and remove it.


3. Remove the bulb. Reading Lamps


1. Carefully release the spring clip. 2. Remove the lamp. 3. Turn the bulb counterclockwise and


remove it.


1. Carefully remove the lamp. 2. Turn the bulb holder counterclockwise


and remove it.


3. Remove the bulb.


193


Fiesta (CCT), enUSA, Second Printing


E1630044321E72789E99452231E99453231 Maintenance


Luggage Compartment Lamp, Footwell Lamp and Liftgate Lamp


Side marker Headlamp low beam Headlamp high beam Direction indicator


Side Marker 1. Remove the headlamp. See


Removing a Headlamp (page 188).


2. Remove the bulb holder. 3. Remove the bulb. Headlamp Low Beam 1. Remove the headlamp. See


Removing a Headlamp (page 188).


1. Carefully pry out the lamp. 2. Remove the bulb. CHANGING A BULB - 5-DOOR


WARNINGS


Switch the lamps and the ignition off.


Let the bulb cool down before removing it. Do not touch the glass of the bulb.


Note: Only fit bulbs of the correct specification. Note: The following instructions describe how to remove the bulbs. Fit replacements in the reverse order unless otherwise stated. Headlamp Note: Remove the covers to gain access to the bulbs.


194


Fiesta (CCT), enUSA, Second Printing


E72784BACDE159827E161707A Maintenance


Direction Indicator 1. Remove the headlamp. See


Removing a Headlamp (page 188).


2. Remove the cover. 3. Disconnect the electrical connector. 4. Release the clip and remove the bulb. Note: Do not touch the glass of the bulb. Headlamp High Beam 1. Remove the headlamp. See


Removing a Headlamp (page 188).


2. Turn the bulb holder counterclockwise


and remove it.


3. Gently press the bulb into the bulb holder, turn it counterclockwise and remove it.


Side Direction Indicator


2. Remove the cover. 3. Turn the bulb counterclockwise and


remove it.


Note: Do not touch the glass of the bulb.


195


Fiesta (CCT), enUSA, Second Printing


E14680342E14680423E146805312E112777 Maintenance


1. Press the side of the cover to release


the clips.


2. Remove the cover.


3. Remove the bulb and bulb holder.


Remove the bulb. Front Fog Lamps


Note: You cannot separate the fog lamp bulb from the bulb holder. 2. Using a suitable implement, remove


the cover.


3. Remove the screws. 4. Remove the lamp.


1. Remove the retaining clips to gain


access to the lamp assembly.


5. Disconnect the electrical connector.


196


Fiesta (CCT), enUSA, Second Printing


3E112778E1616651234E1616675E1616706 Maintenance


6. Turn the bulb holder counterclockwise


and remove it.


Rear Lamps


1. Remove the screws.


4. Gently press the bulb into the bulb holder, turn it counterclockwise and remove it. Indicator


A. B. Tail and brake C. Reverse Center High Mounted Stop Lamp Note: The LED board is not a serviceable item, please consult your dealer if this fails. License Plate Lamp


2. Disconnect the electrical connector. 3. Turn the bulb holder counterclockwise


and remove it.


1. Carefully release the spring clip. 2. Remove the lamp. 3. Turn the bulb counterclockwise and


remove it.


197


Fiesta (CCT), enUSA, Second Printing


E1028541E1616712E146871ABC321E72789 Interior Lamp


Maintenance


1. Carefully remove the lamp. 2. Turn the bulb holder counterclockwise


and remove it.


3. Remove the bulb. Luggage Compartment Lamp, Footwell Lamp and Liftgate Lamp


1. Carefully remove the lamp. 2. Turn the bulb holder counterclockwise


and remove it.


3. Remove the bulb. Reading Lamps


1. Carefully pry out the lamp. 2. Remove the bulb.


BULB SPECIFICATION CHART


Lamp


Specification


Power (watt)


Front direction indicator Headlamp high beam Headlamp low beam Front fog lamp Side direction indicator


Fiesta (CCT), enUSA, Second Printing


PY27/7
H1LL H11
H11


WY5W


198


27/7
55
55
55


E99452231E99453231E72784 Maintenance


Lamp


Specification


Power (watt)


PY27/7
PY27/7
W16W W5W W6W W5W W5W


27/7
27/7
16


Note: Failure to use the correct air filter element may result in severe engine damage. Your warranty may be void for any damage to the engine if the correct air filter element is not used. Vehicles with 1.0L EcoBoost and 1.6L EcoBoost Engine


Rear direction indicator Brake and tail lamp Reversing lamp License plate lamp Interior lamp Reading lamp Luggage compartment lamp Note: On some vehicles the lamps are LED. These are not serviceable items, have your vehicle checked by an authorized dealer as soon as possible. CHANGING THE ENGINE AIR FILTER


WARNING


To reduce the risk of vehicle damage and personal burn injuries, do not start your engine with the air cleaner


removed and do not remove it while the engine is running.


When changing the air filter element, use only the air filter element listed. See Motorcraft Parts (page 242). On vehicles with an EcoBoost engine, when servicing the air cleaner it is important that no foreign material enters the air induction system. The engine and turbocharger are susceptible to damage from even small particles. Change the air filter element at the correct interval. See Normal Scheduled Maintenance (page 399).


199


Fiesta (CCT), enUSA, Second Printing


E156923 Maintenance


Vehicles with 1.6L Duratec-16V Engine


2. Carefully lift the air filter housing cover. 3. Remove the air filter element from the


air filter housing.


5.


4. Wipe any dirt or debris from the air filter housing and cover to make sure no dirt gets in the engine and to make sure you have a good seal. Install a new air filter element. Be careful not to crimp the filter element edges between the air filter housing and cover. This could cause filter damage and allow unfiltered air to enter the engine if not correctly seated. Install the air filter housing cover. Install the retaining screws to secure the air filter housing cover to the air filter housing.


6. 7.


1. Remove the retaining screws that secure the air filter housing cover.


TECHNICAL SPECIFICATIONS - 1.0L ECOBOOST™ Capacities


Item


Engine lubrication system – including the oil filter Engine lubrication system – excluding the oil filter Engine oil top-up – raise the level on the dipstick from minimum to maximum Engine cooling system Fuel tank Brake fluid


Manual transmission Windshield and rear window washer system - including headlamp washer A/C refrigerant A/C refrigerant compressor oil


Capacity


4.3 qt (4.1 L) 4.0 qt (3.8 L) 0.8 qt (0.75 L)


6.1 qt (5.8 L) 12.4 gal (47 L)


Between MIN/MAX on brake fluid


reservoir


1.8 qt (1.7 L) 2.6 qt (2.5 L)


24 oz (0.68 kg) 4.2 fl oz (125 ml)


200


Fiesta (CCT), enUSA, Second Printing


E156924 Maintenance


Specifications Materials


Name


Recommended motor oil (U.S. and Mexico): Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP Recommended Motor oil (Canada): Motorcraft SAE 5W-20 Synthetic Motor Oil CXO-5W20-LSP12
Optional motor oil (U.S. and Mexico): Motorcraft SAE 5W-20 Full Synthetic Motor Oil XO-5W20-QFS Optional Motor oil (Canada): Motorcraft SAE 5W-20 Synthetic Motor Oil CXO-5W20-LFS12
Engine coolant (U.S. and Mexico): Motorcraft Orange Antifreeze/Coolant Prediluted VC-3DIL-B Engine coolant (Canada): Motorcraft Orange Antifreeze/Coolant Prediluted CVC-3DIL-B Brake fluid: Motorcraft DOT 4 Low Viscosity (LV) High Performance Motor Vehicle Brake Fluid PM-20
Manual transmission fluid: Motorcraft Dual Clutch Transmission Fluid XT-11-QDC Windshield washer fluid (U.S. and Mexico): Motorcraft Premium Windshield Wash Concentrate with Bitterant ZC-32-B2
Windshield washer fluid (Canada): Motorcraft Premium Quality Windshield Washer Fluid CXC-37-(A, B, D, F) A/C refrigerant (U.S. and Mexico): Motorcraft R-134a Refrigerant


Specification


WSS-M2C945-A


WSS-M2C945-A


WSS-M2C945-A


WSS-M2C945-A


WSS-M97B44-D2


WSS-M97B44-D2


WSS-M6C65-A2


WSS-M2C200-D2


WSS-M14P19-A


WSS-M14P19-A


WSH-M17B19-A


201


Fiesta (CCT), enUSA, Second Printing


Maintenance


Name


Specification


WSH-M17B19-A


WSH-M1C231-B


ESB-M1C93-B


An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of the International Lubricant Standardization and Approval Committee (ILSAC). Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty.


YN-19
A/C refrigerant (Canada): Motorcraft R-134a Refrigerant CYN-16-R A/C refrigerant compressor oil: Motorcraft PAG Refrigerant Compressor Oil YN-12-D Multi-purpose grease: Motorcraft Multi-Purpose Grease Spray XL-5


If you use oil and fluids that do not meet the defined specification and viscosity grade, this may lead to: • Component damage which is not covered by the vehicle warranty. Longer engine cranking periods. Increased emission levels.


• • • Reduced engine performance. • Reduced fuel economy. • Degraded brake performance. Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specifications. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API certification mark.


202


Fiesta (CCT), enUSA, Second Printing


E142732 Maintenance


Note: Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure. TECHNICAL SPECIFICATIONS - 1.6L ECOBOOST™ Capacities


Item


Engine lubrication system – including the oil filter Engine lubrication system – excluding the oil filter Engine oil top-up – raise the level on the dipstick from minimum to maximum Engine cooling system Fuel tank Brake fluid


Manual transmission Windshield and rear window washer system – including headlamp washer A/C refrigerant A/C refrigerant compressor oil


Capacity


4.3 qt (4.1 L) 4.0 qt (3.8 L) 0.8 qt (0.75 L)


6.1 qt (5.8 L) 12.4 gal (47 L)


Between MIN/MAX on brake fluid


reservoir


1.8 qt (1.7 L) 2.6 qt (2.5 L)


24 oz (0.68 kg) 5.1 fl oz (150 ml)


203


Fiesta (CCT), enUSA, Second Printing


Maintenance


Specifications Materials


Name


Recommended motor oil (U.S. and Mexico): Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP Recommended Motor oil (Canada): Motorcraft SAE 5W-20 Synthetic Motor Oil CXO-5W20-LSP12
Optional motor oil (U.S. and Mexico): Motorcraft SAE 5W-20 Full Synthetic Motor Oil XO-5W20-QFS Optional Motor oil (Canada): Motorcraft SAE 5W-20 Synthetic Motor Oil CXO-5W20-LFS12
Engine coolant (U.S. and Mexico): Motorcraft Orange Antifreeze/Coolant Prediluted VC-3DIL-B Engine coolant (Canada): Motorcraft Orange Antifreeze/Coolant Prediluted CVC-3DIL-B Brake fluid: Motorcraft DOT 4 Low Viscosity (LV) High Performance Motor Vehicle Brake Fluid PM-20
Manual transmission fluid: Motorcraft Dual Clutch Transmission Fluid XT-11-QDC Windshield washer fluid (U.S. and Mexico): Motorcraft Premium Windshield Wash Concentrate with Bitterant ZC-32-B2
Windshield washer fluid (Canada): Motorcraft Premium Quality Windshield Washer Fluid CXC-37-(A, B, D, F) A/C refrigerant (U.S. and Mexico): Motorcraft R-134a Refrigerant


Specification


WSS-M2C945-A


WSS-M2C945-A


WSS-M2C945-A


WSS-M2C945-A


WSS-M97B44-D2


WSS-M97B44-D2


WSS-M6C65-A2


WSS-M2C200-D2


WSS-M14P19-A


WSS-M14P19-A


WSH-M17B19-A


204


Fiesta (CCT), enUSA, Second Printing


Maintenance


Name


Specification


WSH-M17B19-A


WSH-M1C231-B


ESB-M1C93-B


An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of the International Lubricant Standardization and Approval Committee (ILSAC). Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty.


YN-19
A/C refrigerant (Canada): Motorcraft R-134a Refrigerant CYN-16-R A/C refrigerant compressor oil: Motorcraft PAG Refrigerant Compressor Oil YN-12-D Multi-purpose grease: Motorcraft Multi-Purpose Grease Spray XL-5


If you use oil and fluids that do not meet the defined specification and viscosity grade, this may lead to: • Component damage which is not covered by the vehicle warranty. Longer engine cranking periods. Increased emission levels.


• • • Reduced engine performance. • Reduced fuel economy. • Degraded brake performance. Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specifications. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API certification mark.


205


Fiesta (CCT), enUSA, Second Printing


E142732 Maintenance


Note: Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure. TECHNICAL SPECIFICATIONS - 1.6L DURATEC-16V TI-VCT (SIGMA) Capacities


Item


Engine lubrication system – including the oil filter Engine lubrication system – excluding the oil filter Engine oil top-up – raise the level on the dipstick from minimum to maximum Engine cooling system Fuel tank Automatic transmission Manual transmission Windshield and rear window washer system – including headlamp washer A/C refrigerant A/C refrigerant compressor oil


Capacity


4.3 qt (4.1 L) 4.0 qt (3.8 L) 0.8 qt (0.75 L)


6.1 qt (5.8 L) 12 gal (47 L) 1.8 qt (1.7 L) 2.2 qt (2.1 L) 2.6 qt (2.5 L)


21 oz (0.6 kg)


5.1 fl oz (150 ml)


206


Fiesta (CCT), enUSA, Second Printing


Maintenance


Specifications Materials


Name


Recommended motor oil (U.S. and Mexico): Motorcraft SAE 5W-20 Premium Synthetic Blend Motor Oil XO-5W20-QSP Recommended Motor oil (Canada): Motorcraft SAE 5W-20 Synthetic Motor Oil CXO-5W20-LSP12
Optional motor oil (U.S. and Mexico): Motorcraft SAE 5W-20 Full Synthetic Motor Oil XO-5W20-QFS Optional Motor oil (Canada): Motorcraft SAE 5W-20 Synthetic Motor Oil CXO-5W20-LFS12
Engine coolant (U.S. and Mexico): Motorcraft Orange Antifreeze/Coolant Prediluted VC-3DIL-B Engine coolant (Canada): Motorcraft Orange Antifreeze/Coolant Prediluted CVC-3DIL-B Brake fluid: Motorcraft DOT 4 Low Viscosity (LV) High Performance Motor Vehicle Brake Fluid PM-20
Automatic transmission fluid: Motorcraft Dual Clutch Transmission Fluid XT-11-QDC Manual transmission fluid: Motorcraft Full Synthetic Manual Transmission Fluid XT-M5-QS Windshield washer fluid (U.S. and Mexico): Motorcraft Premium Windshield Wash Concentrate with Bitterant ZC-32-B2
Windshield washer fluid (Canada): Motorcraft Premium Quality Windshield Washer Fluid


Specification


WSS-M2C945-A


WSS-M2C945-A


WSS-M2C945-A


WSS-M2C945-A


WSS-M97B44-D2


WSS-M97B44-D2


WSS-M6C65-A2


WSS-M2C200-D2


WSD-M2C200-C


WSS-M14P19-A


WSS-M14P19-A


207


Fiesta (CCT), enUSA, Second Printing


Maintenance


Name


Specification


WSH-M17B19-A


WSH-M17B19-A


WSH-M1C231-B


ESB-M1C93-B


An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of the International Lubricant Standardization and Approval Committee (ILSAC). Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty.


CXC-37-(A, B, D, F) A/C refrigerant (U.S. and Mexico): Motorcraft R-134a Refrigerant YN-19
A/C refrigerant (Canada): Motorcraft R-134a Refrigerant CYN-16-R A/C refrigerant compressor oil: Motorcraft PAG Refrigerant Compressor Oil YN-12-D Multi-purpose grease: Motorcraft Multi-Purpose Grease Spray XL-5


If you use oil and fluids that do not meet the defined specification and viscosity grade, this may lead to: • Component damage which is not covered by the vehicle warranty. Longer engine cranking periods. Increased emission levels.


• • • Reduced engine performance. • Reduced fuel economy. • Degraded brake performance. Use of synthetic or synthetic blend motor oil is not mandatory. Only use fluid that meets Ford specifications. Motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines are also acceptable. Do not use oil labeled with API SN service category unless the label also displays the API certification mark.


208


Fiesta (CCT), enUSA, Second Printing


E142732 Maintenance


Note: Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure. Note: Automatic transmissions that require MERCON LV transmission fluid should only use MERCON LV transmission fluid. The use of any other fluid may cause transmission damage.


209


Fiesta (CCT), enUSA, Second Printing


Vehicle Care


• Never use strong household detergents


or soap, for example dish washing or laundry liquid. These products can discolor and spot painted surfaces.


• Never wash your vehicle when is hot to


the touch, or during strong or direct sunlight.


• Dry your vehicle with a chamois or soft


terry cloth towel to eliminate water spotting. Immediately remove fuel spillages, bird droppings, insect deposits and road tar. These may cause damage to your vehicle’s paintwork or trim over time. We recommend Motorcraft Bug and Tar Remover.



• Remove any exterior accessories, for example antennas, before entering a car wash.


Note: Suntan lotions and insect repellents can damage painted surfaces. If these substances come in contact with your vehicle, wash the affected area as soon as possible. Exterior Chrome Parts • Apply a high quality-cleaning product to bumpers and other chrome parts. Follow the manufacturer’s instructions. We recommend Motorcraft Custom Bright Metal Cleaner.


• Do not apply the cleaning product to hot surfaces. Do not leave the cleaning product on chrome surfaces longer than the time recommended.


• Using other non-recommended cleaners can result in severe and permanent cosmetic damage.


Note: Never use abrasive materials, for example steel wool or plastic pads as they can scratch the chrome surface. Note: Do not use chrome cleaner, metal cleaner or polish on wheels or wheel covers.


CLEANING PRODUCTS For best results, use the following products or products of equivalent quality: • Motorcraft Bug and Tar Remover


(ZC-42)


• Motorcraft Custom Bright Metal


Cleaner (ZC-15)


• Motorcraft Detail Wash (ZC-3-A) • Motorcraft Dusting Cloth (ZC-24) • Motorcraft Engine Shampoo and


Degreaser (U.S. only) (ZC-20)


• Motorcraft Engine Shampoo (Canada


only) (CXC-66-A)


• Motorcraft Multi-Purpose Cleaner


(Canada only) (CXC-101)


• Motorcraft Premium Glass Cleaner


(Canada only) (CXC-100)


• Motorcraft Premium Quality


Windshield Washer Fluid (Canada only) [CXC-37-(A, B, D or F)]


• Motorcraft Premium Windshield Wash Concentrate with Bitterant (U.S. only) (ZC-32-B2)


• Motorcraft Professional Strength


Carpet & Upholstery Cleaner (ZC-54) • Motorcraft Premium Leather and Vinyl


Cleaner (ZC-56)


• Motorcraft Spot and Stain Remover


(U.S. only) (ZC-14)


• Motorcraft Ultra-Clear Spray Glass


Cleaner (ZC-23)


• Motorcraft Wheel and Tire Cleaner


(ZC-37-A)


CLEANING THE EXTERIOR Wash your vehicle regularly with cool or lukewarm water and a neutral pH shampoo, we recommend Motorcraft

Loading...
x