Download PDF Manual


adjust the setting.


4. Press the OK button to confirm your


selection.


5. Press the MENU button to return.


Waveband Button Press the RADIO button to select from the wavebands available. You can use the selector to return to radio reception when you have been listening to another source. Alternatively, press the left arrow button to display the available wavebands. Scroll to the required waveband and press OK. Station Tuning Control Seek Tuning Select a waveband and briefly press one of the seek buttons. The unit will stop at the first station it finds in the direction you have chosen. Manual Tuning 1. Press function button 2. 2. Use the left and right arrow buttons to tune down or up the waveband in small increments or press and hold to increment quickly, until you find a station you want to listen to.


3. Press OK to continue listening to a


station.


Scan Tuning Scan allows you to listen to a few seconds of each station detected. 1. Press function button 3. 2. Use the seek buttons to scan up or


down the selected waveband.


3. Press function button 3 again or OK


to continue listening to a station.


Station Preset Buttons This feature allows you to store your favorite stations, they can be recalled by selecting the appropriate waveband and pressing one of the preset buttons.


252


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


Audio System


When selected, AF will be shown in the display. 1. Press the MENU button. 2. Select Audio Settings. 3. Scroll to Alternat. freq. or Alt.


Frequency. and turn on or off with the OK button.


4. Press the MENU button to return. Regional Mode Regional mode controls the behavior of alternative frequencies switching between regionally related networks of a parent broadcaster. A broadcaster may run a fairly large network across a large part of the country. At various times of the day this large network may be broken down into a number of smaller regional networks, typically centered on major towns or cities. When the network is not split into regional variants, the whole network carries the same programming. Regional mode ON: This prevents random alternative frequency switches when neighboring regional networks are not carrying the same programming. Regional mode OFF: This allows a larger coverage area if neighboring regional networks are carrying the same programming, but can cause random alternative frequency switches if they are not. 1. Press the MENU button. 2. Select Audio Settings. 3. Scroll to RDS regional and turn on or


off with the OK button.


4. Press the MENU button to return.


News Broadcasts Your audio unit may interrupt normal reception to broadcast news bulletins from stations on the FM waveband, radio data system or other enhanced network linked stations. The display will indicate there is an incoming announcement, during news broadcasts. When the audio unit interrupts for a news broadcast the preset volume level will be the same as traffic announcements. 1. Press the MENU button. 2. Select Audio Settings. 3. Scroll to News and turn on or off with


the OK button.


4. Press the MENU button to return. Alternative Frequencies The majority of programs that broadcast on the FM waveband have a program identification code, it can be recognized by audio units. When your vehicle moves from one transmission area to another with the alternative frequencies tuning switched on, this function will search for the strongest station signal. Under certain conditions, alternative frequencies tuning may temporarily disrupt normal reception. When selected, the unit continually evaluates signal strength and, if a better signal becomes available, the unit will switch to that alternative. It mutes while it checks a list of alternative frequencies and if necessary, it will search once across the selected waveband for a genuine alternative frequency. It will restore radio reception when it finds one or if one is not found, the unit will return to the original stored frequency.


253


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


Audio System


AUDIO UNIT - VEHICLES WITH: TOUCHSCREEN DISPLAY


Note: The MyFord Touch® system controls most of the audio features. See MyFord Touch™ (page 295).


WARNING


Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any handheld device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.


Tune: Press these buttons when in radio mode to manually search up or down through the radio frequency band. In SIRIUS mode, press these buttons to find the next or previous available satellite radio station. On, Off and Volume: Press the button to switch the audio system on or off. Turn the dial to adjust the volume. Eject: Press the button to eject a CD.


254


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


E143843 Audio System


SEEK Press these buttons when you are in radio mode to go to the next station up or down the radio frequency band, or to go to the next or previous track on a CD. In SIRIUS mode, press these buttons to select the next or previous channel. If a specific category is selected (for example Jazz, Rock or News), use these buttons to find the next or previous channel in the selected category. SOUND: Press the button to adjust the sound settings for bass, treble, middle, balance and fade. SOURCE: Press the button to access different audio modes, such as AM, FM and A/V input.


Note: The MyFord Touch® system controls most of the audio features. See MyFord Touch™ (page 295).


AUDIO UNIT - VEHICLES WITH: SONY AUDIO SYSTEM/TOUCHSCREEN DISPLAY


WARNING


Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any handheld device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.


255


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


Audio System


On, Off: Press the button to switch the audio system on or off. CD Slot Where you insert a CD. TUNE +: In radio mode, press this button to manually search forward through the radio frequency band. In SIRIUS mode, press this button to find the next available satellite radio station. Seek up In radio mode, press this button to go to the next station up the radio frequency band. Press to go to the next track on a CD. In SIRIUS mode, press this button to select the next channel. If a specific category is selected (for example Jazz, Rock or News), use this button to find the next channel in the selected category. Eject: Press the button to eject a CD. SOUND: Press the button to adjust the sound settings for bass, treble, middle, balance and fade. Volume Turn the dial to adjust the volume.


256


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


E156663ABCDEJIFGH Audio System


TUNE -: In radio mode, press this button to manually search backward through the radio frequency band. In SIRIUS mode, press this button to find the previous available satellite radio station. Seek down In radio mode, press this button to go to the next station down the radio frequency band. Press to go to the previous track on a CD. In SIRIUS mode, press this button to select the previous channel. If a specific category is selected (for example Jazz, Rock or News), use this button to find the previous channel in the selected category. SOURCE: Press the button to access different audio modes, such as AM, FM and A/V input.


AUXILIARY INPUT JACK


WARNINGS


Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.


For safety reasons, do not connect or adjust the settings on your portable music player while your


vehicle is moving.


Store the portable music player in a secure location, such as the center console or the glove box, when your


vehicle is moving. Hard objects may become projectiles in a collision or sudden stop, which may increase the risk of serious injury. The audio extension cable must be long enough to allow the portable music player to be safely stored while your vehicle is moving.


257


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


The auxiliary input jack allows you to connect and play music from your portable music player through your vehicle speakers. You can use any portable music player designed for use with headphones. Your audio extension cable must have male 1/8th-inch (3.5 millimeter) connectors at each end. 1. Switch off the engine, radio and


portable music player. Set the parking brake and put the transmission in position P (vehicle with an automatic transmission) or neutral (vehicle with a manual transmission).


2. Plug the extension cable from the


portable music player into the auxiliary input jack.


3. Switch the radio on. Select either a


tuned FM station or a CD.


4. Adjust the volume as desired.


E149149 Audio System


5. Switch your portable music player on


and adjust its volume to half its maximum level.


6. Press AUX until LINE or LINE IN


appears in the display. You should hear music from your device even if it is low.


7. Adjust the volume on your portable


music player until it reaches the volume level of the FM station or CD. Do this by switching back and forth between the AUX and FM or CD controls.


AUDIO TROUBLESHOOTING


Audio unit display PLEASE CHECK CD


CD DRIVE MALFUNCTION


CD DRIVE HIGH TEMP


Rectification


General error message for CD fault conditions, such as cannot read the CD, data-CD inserted, etc. Make sure the disc is loaded correct way up. Clean and re-try, or replace disc with known music disc. If error persists


contact your dealer.


General error message for CD fault conditions such as


possible mechanism fault.


Ambient temperature too hot – unit will not work until


it has cooled down.


258


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


GENERAL INFORMATION


SYNC is an in-vehicle communications system that works with your Bluetooth-enabled cellular phone and portable media player. This allows you to: • Make and receive calls. • Access and play music from your


portable music player.


• Use 911 Assist, Vehicle Health Report and SYNC Services (Traffic, Directions & Information).*


• Use applications, such as Pandora and


Stitcher, via SYNC AppLink.


• Access phonebook contacts and music


using voice commands. Stream music from your connected phone. Text message.




• Use the advanced voice recognition


system


• Charge your USB device (if your device


supports this).


*These features require activation. Make sure that you review your device's manual before using it with SYNC. Support The SYNC support team is available to help you with any questions you cannot answer on your own. Monday-Saturday, 8:30am-9:00pm EST. Sunday, 10:30am-7:30pm EST. In the United States, call 1-800-392-3673. In Canada, call 1-800-565-3673.


259


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


E142598 SYNC™


When using SYNC: • Do not operate playing devices if the


power cords or cables are broken, split or damaged. Place cords and cables out of the way, so they do not interfere with the operation of pedals, seats, compartments or safe driving abilities.


• Do not leave playing devices in your


vehicle during extreme conditions as it could cause them damage. See your device's manual for further information. • Do not attempt to service or repair the


system. See an authorized dealer.


Privacy Information When a cellular phone is connected to SYNC, the system creates a profile within your vehicle that is linked to that cellular phone. This profile is created in order to offer you more cellular features and to operate more efficiently. Among other things, this profile may contain data about your cellular phone book, text messages (read and unread), and call history, including history of calls when your cellular phone was not connected to the system. In addition, if you connect a media device, the system creates and retains an index of supported media content. The system also records a short development log of approximately 10 minutes of all recent system activity. The log profile and other system data may be used to improve the system and help diagnose any problems that may occur. The cellular profile, media device index, and development log will remain in the vehicle unless you delete them and are generally accessible only in the vehicle when the cellular phone or media player is connected. If you no longer plan to use the system or the vehicle, we recommend you perform a Master Reset to erase all stored information.


Times are subject to change due to holidays. SYNC Owner Account Why do I need a SYNC owner account? • Required to activate Vehicle Health


Report and to view the reports online.


• Required to activate the


subscription-based SYNC Services and to personalize your Saved Points and Favorites. Essential for keeping up with the latest software downloads available for SYNC.



• Access to customer support for any


questions you may have.


Driving Restrictions For your safety, certain features are speed-dependent and restricted when your vehicle is traveling over 3 mph (5 km/h). Safety Information


WARNING


Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.


260


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


System data cannot be accessed without special equipment and access to the vehicle's SYNC module. Ford Motor Company and Ford of Canada will not access the system data for any purpose other than as described absent consent, a court order, or where required by law enforcement, other government authorities, or other third parties acting with lawful authority. Other parties may seek to access the information independently of Ford Motor Company and Ford of Canada. For further privacy information, see the sections on 911 Assist, Vehicle Health Report, and Traffic, Directions and Information.


USING VOICE RECOGNITION This system helps you control many features using voice commands. This allows you to keep your hands on the wheel and focus on what is in front of you. Initiating a Voice Session


Push the voice icon. A tone sounds and Listening appears in the display. Say any of the


following:


Say


"Bluetooth audio" "Cancel" "Line in"


"Mobile apps" * "Phone"


"Services" * "SYNC" "USB"


"Vehicle health report" * "Voice settings" "Help"


If You Want To


Stream audio from your phone. Cancel the requested action. Access the device connected to the auxiliary input jack. Access mobile applications.


Make calls. Access the SYNC Services portal.


Return to the main menu. Access the device connected to your USB port. Run a vehicle health report.


Adjust the level of voice interaction and feedback. Hear a list of voice commands available in the current mode.


* This is an optional feature and available in the United States only.


261


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


E142599 SYNC™


System Interaction and Feedback The system provides feedback through audible tones, prompts, questions and spoken confirmations depending on the situation and the chosen level of interaction (voice settings). You can customize the voice recognition system to provide more or less instruction and feedback.


The default setting is to a higher level of interaction in order to help you learn to use the system. You can change these settings at any time. Adjusting the Interaction Level


Push the voice icon. Say "Voice settings" when prompted, then any of the following:


When you say:


"Interaction mode standard"


"Interaction mode advanced"


The system:


Provides more detailed interaction and


guidance.


Provides less audible interaction and more


tone prompts.


The system defaults to the standard interaction mode.


Confirmation prompts are short questions the system asks when it is not sure of your request or when there are multiple possible responses to your request. For example, the system may ask "Phone, is that correct?". If turned off, the system simply makes a best guess as to what you requested and may ask you to confirm settings.


When you say:


"Confirmation prompts off"


"Confirmation prompts on"


The system creates candidate lists when it has the same confidence level of several options based on your voice command. When turned on, it may prompt you with as many as four possibilities for clarification.


The system:


Makes a best guess from the command; you may still occasionally be asked to


confirm settings.


Clarifies your voice command with a short


question.


For example, say "Say 1 after the tone to call John Doe at home. Say 2 after the tone to call Johnny Doe on mobile. Say 3 after the tone to call Jane Doe at home." You could also say "Say 1 after the tone to play John Doe, Say 2 after the tone to play Johnny Doe."


262


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


E142599 When you say:


"Media candidate lists off"


"Media candidate lists on"


"Phone candidate lists off"


SYNC™


The system:


Makes a best guess from the media


candidate list. You may still occasionally


be asked questions.


Clarifies your voice command for media


candidates.


Makes a best guess from the phone


candidate list. You may still occasionally


be asked questions.


"Phone candidate lists on"


Clarifies your voice command for phone


candidates


Ending a call.


USING SYNC™ WITH YOUR PHONE Hands-free calling is one of the main features of SYNC. While the system supports a variety of features, many are dependent on your cellular phone's functionality. At a minimum, most cellular phones with Bluetooth wireless technology support the following functions: • Answering an incoming call. • • Using privacy mode. • Dialing a number. • Redialing. • Call waiting notification. • Caller ID. Other features, such as text messaging using Bluetooth and automatic phonebook download, are phone-dependent features. To check your phone's compatibility, see your phone's manual and visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca.


Helpful Hints • Make sure the interior of your vehicle is as quiet as possible. Wind noise from open windows and road vibrations may prevent the system from correctly recognizing spoken commands.


• After pressing the voice icon, wait until


after the tone sounds and Listening appears before saying a command. Any command spoken before this does not register with the system. Speak naturally, without long pauses between words.



• At any time, you can interrupt the


system while it is speaking by pressing the voice icon.


263


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


OK.


1. Press the phone button, and then scroll


to System Settings. Press OK.


2. Scroll to Bluetooth Devices. Press OK. 3. Scroll to Add Bluetooth Device. Press


4. When Find SYNC appears in the


display, press OK.


5. Put your phone into Bluetooth


discovery mode. See your phone's manual if necessary.


6. When prompted on your phone's


display, enter the six-digit PIN provided by SYNC in the radio display. The display indicates when the pairing is successful.


The system then prompts with questions, such as if you would like to set the current phone as the primary phone (the phone SYNC automatically tries to connect with first upon vehicle start-up) and download your phone book. Phone Voice Commands Press the voice icon and say "Phone". Say any of the following:


"PHONE"


"Call "1,2


"Call at home"1,2


"Call at work"1,2


"Call in office"1,2


"Call on mobile OR cell"1,2


"Call on other"1,2


"Call history incoming"2


"Call history missed"2


Pairing a Phone for the First Time Note: SYNC can support downloading up to approximately 1000 entries per Bluetooth-enabled cellular phone. Note: Make sure to switch on the ignition and the radio. Put the transmission in position P. Note: To scroll through the menus, press the up and down arrows on your audio system. Wirelessly pairing your phone with SYNC allows you to make and receive hands-free calls. 1. Press the phone button. When the display indicates there is no phone paired, press OK.


2. When Find SYNC appears in the


display, press OK.


3. Put your phone into Bluetooth


discovery mode. See your device's manual if necessary.


4. When prompted on your phone's


display, enter the six-digit PIN provided by SYNC in the radio display. The display indicates when the pairing is successful.


Depending on your phone's capability and your market, the system may prompt you with questions, such as setting the current phone as the primary phone (the phone SYNC automatically tries to connect with first upon vehicle start-up) and downloading your phonebook. Pairing Subsequent Phones Note: Make sure to switch on the ignition and the radio. Put the transmission in position P. Note: To scroll through the menus, press the up and down arrows on your audio system.


264


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


"PHONE"


"Call history outgoing"2


"Connections"2


"Dial"1,3


"Go to privacy"


"Hold" "Join"


"Menu"2,4


"Phone book "2


"Phone book at home"2


"Phone book at office"2


"Phone book at work" 2


"Phone book on mobile OR


cell"2


"Phone book on other"2


1 This command does not require you to say "Phone" first. 2 This command is not available until phone information is completely downloaded using Bluetooth. 3 See Dial table below. 4 See Menu table below. Phone book commands: When you ask SYNC to access things such as a phonebook name or number, the requested information appears in the display to view. Press the phone button and say, "Call" to call the contact.


"DIAL"


"411 (four-one-one)", "911" (nine-one-


one)


"700" (seven hundred) "800" (eight hundred) "900" (nine hundred)


"Pound" (#)


"Number <0-9>"


"Asterisk" (*)


"Clear" (deletes all entered digits)


"Delete" (deletes one digit)


"Plus" "Star"


Note: To exit dial mode, press and hold the phone button or press MENU to go to the phone menu.


"MENU"


"(Phone) connections"


"(Phone) settings (message) notification


off"


"(Phone) settings (message) notification


on"


"(Phone) settings (set) phone ringer"


"(Phone) settings (set) ringer 1" "(Phone) settings (set) ringer 2" "(Phone) settings (set) ringer 3" "(Phone) settings (set) ringer off"


"Battery"


"Phone name"


265


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


"MENU" "Signal"


"Text message inbox"


Words in ( ) are optional and do not have to be spoken for the system to understand the command. Making Calls Press the voice icon and when prompted say: 1. Say "Call " or "Dial", then the


desired number.


2. When the system confirms the number,


say, "Dial" again to initiate the call.


To erase the last spoken digit, say, "Delete" or press the left arrow button. To erase all spoken digits, say "Clear" or press and hold the left arrow button. To end the call, press and hold the phone button.


Receiving Calls When receiving a call, you can: • Answer the call by pressing the phone


button.


• Reject the call by pressing and holding


the phone button. Ignore the call by doing nothing.


• Phone Options during an Active Call During an active call, you have more menu features that become available, such as putting a call on hold or joining calls. Use the arrow buttons to scroll through the menu options. 1. Press MENU during an active call. 2. After selecting Active Call Menu, press


OK.


3. Scroll to cycle through the following


options:


When you select:


You can:


Mute Call? Privacy


Call Hold


Enter Tones


Join Calls


Mute the call. Switch a call from an active hands-free environment to your cellular phone for a more private conversation. Press OK when Privacy on/off appears. (The display indicates In Privacy and the system transfers your call.) Put an active call on hold. Press OK when Hold on/off appears. To answer another call at this time, press the phone button. Enter "tones", such as numbers for passwords. Scroll until the desired number appears in the display, then press OK; a tone sounds as confirmation. Repeat as necessary. Join two separate calls. (SYNC supports a maximum of three callers on a multiparty call or conference call.) 1. Press the phone button.


266


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


When you select:


You can:


2. Access the desired contact through SYNC or use voice commands to place the second call. Once actively in the second call, press MENU. 3. Scroll to Join Calls, and press OK. Press OK again when Join Calls? appears. Access your phonebook contacts. 1. Press OK to select, and then scroll through your phone- book contacts. 2. Press OK again when the desired selection appears in the display. 3. Press the phone button. Access your call history log. 1. Press OK to select, then scroll through your call history options (incoming, outgoing or missed). 2. Press OK when the desired selection appears in the display. 3. Press the phone button to call the selection. Exit the current menu.


Phonebook


Call History


Return


1. Press the phone button to enter the


phone menu.


2. Scroll to cycle through:


Accessing Features through the Phone Menu SYNC's phone menu allows you to redial a number, access your call history and phonebook and sends text messages as well as access phone and system settings. You can also access advanced features, such as 911 Assist, Vehicle Health Report and SYNC Services.


When you select:


You can:


Phone Redial


Call History1


Redial the last number called (if available). Press OK to select, and then press OK again to confirm. Access any previously dialed, received or missed calls after you connect your Bluetooth-enabled phone to SYNC. 1. Press OK to select. 2. Scroll to select from Call History Incoming, Call History Outgoing or Call History Missed. Press OK to make your selection. 3. Press OK or the phone button to call the desired selec- tion.


267


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


When you select:


You can:


Phonebook1,2


Text Message1


Phone Settings 1


SYNC Services3


911 Assist4


Vehicle Health Report3


Mobile Apps3


System Settings


Note: The system attempts to automatically re-download your phonebook and call history each time your phone connects to SYNC (if the auto download feature is on and your Bluetooth-enabled cellular phone supports this feature). Access and call any contacts in your previously down- loaded phonebook. 1. Press OK to confirm and enter. If your phonebook has fewer than 255 listings, they appear alphabetically in flat file mode. If there are more than 255 entries, the system organizes them into alphabetical categories. 2. Scroll until the desired contact appears, then press OK. 3. Press OK or the phone button. Send, download and delete text messages.


View your phone's status, set ring tones, select your message notification, change phone book entries and automatically download your cellular phone among other features. Access the SYNC Services portal where you can request various types of information, traffic reports and directions. Place an emergency call to a 911 operator for you after an accident, when used properly. Create and receive a diagnostic report card on your vehicle.


Interact with SYNC-capable mobile applications on your smartphone. Access Bluetooth Devices menu listings (Add, Connect, Set as Primary, On and Off, Delete) as well as Advanced menu listings (prompts, languages, defaults, master reset, install application and system information). Exit the phone menu by pressing OK.


Exit Phone Menu 1 This is a phone-dependent feature. 2 This is a phone-dependent and speed-dependent feature. 3 This is an optional feature and available in the United States only. 4 This is an optional feature and available in the United States and Canada only.


268


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


Text Messaging Note: This is a phone-dependent feature. SYNC allows you to receive, send, download and delete text messages. The system can also read incoming text messages to you so that you do not have to take your eyes off the road. Receiving a Text Message Note: This is a phone-dependent feature. Your phone must support downloading text messages using Bluetooth to receive incoming text messages. When a new message arrives, an audible tone sounds and the display indicates you have a new message. You have these options: • Press the voice button, wait for the prompt and say "Read message" to have SYNC read the message to you. • Press OK to receive and open the text message or do nothing and the message goes into your text message inbox. Press OK again and SYNC reads your message aloud as you are not able to view the message. You can then also choose to reply or forward the message.


• Press OK and scroll to choose


between: • Reply to Text Message: Press OK to access and then scroll through the list of pre-defined messages to send. Forward Text Message: Press OK to forward the message to anyone in your Phonebook or Call History. You can also choose Enter Number.



Sending, Downloading and Deleting Your Text Messages Note: Forwarding a text message is a speed-dependent feature and is only available when your vehicle is traveling at 3
mph (5 km/h) or less. Note: You can only have one recipient per text message. Text messaging is a phone-dependent feature. If your phone is compatible, SYNC allows you to receive, send, download and delete text messages. 1. Press the phone button. 2. Scroll to Text Message, and then press


OK.


Scroll to select from the following options: • Send Text Message? allows you to send a new text message based on a pre-defined set of 15 messages.


• Download Unread Msgs allows you to download your unread messages (only) to SYNC. To download the messages, press OK to select. The display indicates that it is downloading your messages. When it is complete, SYNC takes you to your inbox.


• Delete All Messages? allows you to delete current text messages from SYNC (not your phone). To delete the messages, press OK to select. The display indicates when it is finished deleting all your text messages. SYNC returns you to the text message menu. • Return exits the current menu when


you press OK.


If you select Send Text Message?: 1. Press OK to select. If the system


detects your phone does not support this feature, Unsupported appears in the display and SYNC returns to the main menu.


2. Scroll to cycle through the message


options in the following chart.


269


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


3. Press OK when the desired selection


is in the display.


4. Enter the name of the recipient. Scroll


to cycle through Phonebook or Call History entries. You can also select Enter Number to say the desired number.


5. Press OK to enter the desired menu


and scroll to select the specific contact.


6. Press OK when the contact appears and press OK again to confirm when the system asks if you would like to send the message. The system sends each text message with the following signature: "This message was sent from my ".


Pre-defined text message options


Can't talk right now


Call me


Call U later


Be there in 10 minutes Be there in 20 minutes


Yes


When you select:


Phone Status


Set Ringer


SYNC™


Pre-defined text message options


No Why? Thanks


Where R you?


I need more directions


I love you Too funny


Can't wait to see you


I'm stuck in traffic


Accessing Your Phone Settings These are phone-dependent features. Your phone settings allow you to access and adjust features such as your ring tone, text message notification, modify your phonebook and set up automatic download. 1. Press the phone button. 2. Scroll to Phone Settings, and then


press OK.


3. Scroll to select from the following


options:


You can:


See the provider, name, signal power, battery power and roaming status of your connected phone. Press OK to select and scroll to view the information. When done, press OK again to return to the phone status menu. Select which ring tone sounds during an incoming call (one of the system's or your phone's). 1. Press OK to select and scroll to hear Ringer 1, Ringer 2, Ringer 3 and Phone Ringer. 2. Press OK to select.


270


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


When you select:


You can:


Message Notification


Modify Phonebook


Auto Download


If your phone supports in-band ringing, your phone's ring tone plays when you choose Phone Ringer. Have the option of hearing an audible tone to notify you when a text message arrives. 1. Press OK to select and scroll between Message Notific- ation On and Message Notification Off. 2. Press OK to select. Modify the contents of your phonebook (such as add, delete or download). Press OK to choose between: Add Contacts: Press OK to add more contacts from your phone book. Push the desired contact(s) on your phone. See your phone's manual on how to push contacts. Delete Phonebook: Press OK to delete the current phone book and call history. When Delete Phonebook appears, press OK to confirm. SYNC takes you back to the Phone Settings menu. Download Phonebook: Press OK to select, then and press OK again when Confirm Download? appears. Automatically download your phone book each time your phone connects to SYNC.* Press OK to select. When Auto Download On? appears, press OK to have your phonebook automatically down- loaded each time.** Select Off if you do not want to download your phonebook every time your phone connects to SYNC. Your phonebook, call history and text messages can only be accessed when your specific phone is connected to SYNC. Exit the current menu.


Return *Downloading times are phone-dependent and quantity-dependent. **When Auto Download is on, it automatically deletes any changes, additions or deletions saved since your last download.


System Settings This menu provides access to your Bluetooth Devices and Advanced menu features. Use the arrow buttons to scroll through the menu options.


Bluetooth Devices The Bluetooth Devices menu allows you to add, connect and delete devices, set a phone as primary as well as turn your Bluetooth feature on and off.


271


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


1. Press the phone button to enter the


phone menu


2. Scroll to System Settings. Press OK.


3. Scroll to Bluetooth Devices. Press OK. 4. Scroll to select from the following


options:


If you select:


Add Bluetooth Device* Connect Bluetooth Device


Set as Primary Phone


Set Bluetooth


Delete Device


Delete All Devices


See Using SYNC™ With Your Phone (page 263).


You can:


Connect a previously paired Bluetooth-enabled phone.** 1. Press OK to select and view a list of previously paired phones. 2. Scroll until you find the desired device, and then press OK to connect the phone. Set a previously paired phone as your primary phone. Press OK to select and scroll to select the desired phone. Press OK to confirm. SYNC attempts to connect with the primary phone at every ignition cycle. When you select a phone as a primary phone, it appears first in the list and the system marks it with an asterisk. Turn the Bluetooth feature on and off. Press OK and scroll to toggle between On and Off. Make a selection, and then press OK. Setting Bluetooth to off disconnects all Bluetooth devices and turns off all Bluetooth features. Delete a paired phone. Press OK and scroll to select the device. Press OK to confirm. Delete all previously paired phones (and all information originally saved with those phones). Press OK to select. Exit the current menu.


Return * This is a speed-dependent feature. **You can only connect one device at a time. When another phone is connected, the previous one is disconnected.


272


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


Advanced The Advanced menu allows you to access and set prompts, languages, defaults, perform a master reset, install an application and view system information.


1. Press the phone button to enter the


phone menu


2. Scroll to System Settings. Press OK. 3. Scroll to Advanced. Press OK. 4. Scroll to select from the following


options:


If you select:


Prompts


Languages


Factory Defaults


Master Reset


Install Application?


Delete All Devices


System Info


You can:


Get help from SYNC by using questions, helpful hints or asking you for a specific action. To turn these prompts on or off: 1. Press OK to select and scroll to select between On and Off. 2. Press OK when the desired selection appears in the display. SYNC takes you back to the Advanced menu. Choose between English, Français and Español. Once selected, all of the radio displays and prompts are in the selected language. 1. Press OK to select and then scroll through the languages. 2. Press OK when the desired selection appears in the display. If you change the language setting, the display indicates that the system is updating. When complete, SYNC takes you back to the Advanced menu. Return to the factory default settings. This selection does not erase your indexed information (phonebook, call history, text messages and paired devices). 1. Press OK to select and then press OK again when Restore Defaults? appears in the display. 2. Press OK to confirm. Completely erase all information stored on SYNC (phonebook, call history, text messages and paired devices) and return to the factory default settings. Press OK to select. The display indicates when complete and SYNC takes you back to the Advanced menu. Install applications you have downloaded. Press OK and scroll to select. Press OK to confirm. Delete all previously paired phones (and all information originally saved with those phones). Press OK to select. Access the Auto Version number as well as the FDN number.


273


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


If you select:


You can:


MAP Profile


Return


Press OK to select. This is a Bluetooth component, which can further help your phone with the exchange of text messages. Exit the current menu.


SYNC™ APPLICATIONS AND SERVICES In order for the following features to work, your cellular phone must be compatible with SYNC. To check your phone's compatibility, visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. •


SYNC Services*: Provides access to traffic, directions and information such as travel, horoscopes, stock prices and more. 911 Assist: Can alert 911 in the event of an emergency.



• Vehicle Health Report*: Provides a diagnostic and maintenance report card of your vehicle.


*This is an optional feature and available in the United States only. 911 Assist


WARNINGS


Unless the 911 Assist setting is set on before a crash, the system will not dial for help which could delay


response time, potentially increasing the risk of serious injury or death after a crash.


WARNINGS


Do not wait for 911 Assist to make an emergency call if you can do it yourself. Dial emergency services immediately to avoid delayed response time which could increase the risk of serious injury or death after a crash. If you do not hear 911 Assist within five seconds of the crash, the system or phone may be damaged or non-functional.


Always place your phone in a secure location in your vehicle so it does not become a projectile or get damaged


in a crash. Failure to do so may cause serious injury to someone or damage the phone which could prevent 911 Assist from working properly.


Note: The SYNC 911 Assist feature must be set on before the incident. Note: Before setting this feature on, make sure that you read the 911 Assist Privacy Notice later in this section for important information. Note: If any user turns 911 Assist on or off, that setting applies for all paired phones. If 911 Assist is turned off, either a voice message plays or a display message (or icon) comes on (or both) when your vehicle is started after a previously paired phone connects. Note: Every phone operates differently. While SYNC 911 Assist works with most cellular phones, some may have trouble using this feature.


274


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™



You must pair and connect a Bluetooth-enabled and compatible cell phone to SYNC.


• A connected Bluetooth-enabled phone


must have the ability to make and maintain an outgoing call at the time of the incident.



• A connected Bluetooth-enabled phone must have adequate network coverage, battery power and signal strength. The vehicle must have battery power and be located in the U.S., Canada or in a territory in which 911 is the emergency number. In the Event of a Crash Not all crashes will deploy an airbag or activate the fuel pump shut-off (the triggers for 911 Assist). If a connected cell phone sustains damage or loses its connection to SYNC during a crash, SYNC will search for and try to connect to a previously paired cell phone; SYNC will then attempt to call the emergency services. Before making the call: •


SYNC provides a short window of time (about 10 seconds) to cancel the call. If you fail to cancel the call, SYNC attempts to dial 911. SYNC says the following, or a similar message: "SYNC will attempt to call 911, to cancel the call, press Cancel on your screen or press and hold the phone button on your steering wheel."



If you do not cancel the call, and SYNC makes a successful call, a pre-recorded message plays for the 911 operator, and then the occupant(s) in your vehicle is able to talk with the operator. Be prepared to provide your name, phone number and location immediately, because not all 911
systems are capable of receiving this information electronically.


If a crash deploys an airbag (excluding knee airbags and rear inflatable safety belts [if equipped]) or activates the fuel pump shut-off, your SYNC-equipped vehicle may be able to contact emergency services by dialing 911 through a paired and connected Bluetooth-enabled phone. You can learn more about the 911 Assist feature, visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca. See Supplementary Restraints System (page 34). Important information about airbag deployment is in this chapter. See Roadside Emergencies (page 166). Important information about the fuel pump shut-off is in this chapter. Setting 911 Assist On 1. Press the phone button to enter the


phone menu.


2. Scroll to select 911 Assist. 3. Press OK to confirm and enter the 911


Assist menu.


4. Scroll to select between On and Off. 5. Press OK when the desired option appears in the radio display. Set On or Set Off appears in the display as confirmation.


Off selections include: • Off with reminder: Provides a display


and voice reminder at phone connection at vehicle start.


• Off without reminder: Provides a


display reminder only without a voice reminder at phone connection. To make sure that 911 Assist works properly: •


SYNC must be powered and working properly at the time of the incident and throughout feature activation and use. The 911 Assist feature must be set on before the incident.



275


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


Note: Your Vehicle Health Report feature requires activation before use. Visit www.SYNCMyRide.com to register. There is no fee or subscription associated with Vehicle Health Report, but you must register to use this feature. Note: This feature may not function properly if you have enabled caller ID blocking on your cellular phone. Before running a report, review the Vehicle Health Report Privacy Notice. Note: In order to allow a break-in period for your vehicle, you may not be able to create a Vehicle Health Report until your vehicle odometer has reached 200 miles. Note: Cellular phone and SMS charges may apply when making a report. Register for Vehicle Health Report and set your report preferences at www.SYNCMyRide.com. After registering, you can request a Vehicle Health Report (inside your vehicle). Return to your account at www.SYNCMyRide.com to view your report. You can also choose for SYNC to remind you automatically to run reports at specific mileage intervals. The system allows you to check your vehicle's overall health in the form of a diagnostic report card. The vehicle health report contains valuable information such as: • Vehicle diagnostic information • • Open recalls and Field Service Actions • Items noted during vehicle inspections by an authorized dealer that still need servicing.


Scheduled maintenance


You can run a report (after your vehicle has been running a minimum of 60 seconds) by pressing the voice button and saying "Vehicle health report", or pressing the phone button. To run a report using the phone button:


911 Assist May Not Work If •


Your cellular phone or 911 Assist hardware sustains damage in a crash. The vehicle's battery or the SYNC system has no power. The phone(s) thrown from your vehicle are the ones paired and connected to the system.




911 Assist Privacy Notice When you turn on 911 Assist, it may disclose to emergency services that your vehicle has been in a crash involving the deployment of an airbag or activation of the fuel pump shut-off. Certain versions or updates to 911 Assist may also be capable of electronically or verbally disclosing to 911 operators your vehicle location or other details about your vehicle or crash to assist 911 operators to provide the most appropriate emergency services. If you do not want to disclose this information, do not turn the feature on. Vehicle Health Report WARNING


Always follow scheduled maintenance instructions, regularly inspect your vehicle, and seek repair for any damage or problem you suspect. Vehicle Health Report supplements, but cannot replace, normal maintenance and vehicle inspection. Vehicle Health Report only monitors certain systems electronically monitored by your vehicle and will not monitor or report the status of any other system, (such as brake lining wear). Failure to perform scheduled maintenance and regularly inspect your vehicle may result in vehicle damage and serious injury.


Note: This feature is only available in the United States.


276


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


1. Press the phone button to enter phone


menu.


2. Scroll to select Vehicle Health, and


then press OK.


3. Scroll to select from the following


options:


User Preferences: Press OK to select and enter the menu. Scroll to select from:


Run Report?


Vehicle health report options Automatic Reports: Press OK to and select On or Off. Select On to have SYNC automatically prompt you to run a health report at certain mileage intervals.* Mileage Intervals: Press OK. Scroll to select between 5000, 7500 or 10000-mile intervals and press OK to make your selection. Return: Press OK to exit the menu. Press OK for SYNC to run a health report of your vehicle's diagnostic systems and send the results to Ford where it combines with scheduled maintenance information, open recalls and other field service actions and vehicle inspec- tion items that still need servicing from an authorized dealer.


*You must first turn this feature on before you can select the desired mileage interval.


Vehicle Health Report Privacy Notice When you create a Vehicle Health Report, Ford Motor Company may collect your cellular phone number (to process your report request) and diagnostic information about your vehicle. Certain versions or updates to Vehicle Health Report may also collect more vehicle information. Ford may use your vehicle information it collects for any purpose. If you do not want to disclose your cellular phone number or vehicle information, do not run the feature or set up your Vehicle Health Report profile at www.SYNCMyRide.com. See www.SYNCMyRide.com (Vehicle Health Report Terms and Conditions, and Privacy Statement) for more information.


SYNC Services: Traffic, Directions & Information (TDI) Note: SYNC Services requires activation before use. Visit www.SYNCMyRide.com to register and check your eligibility for complimentary services. Standard phone and message rates may apply. Subscription may be required. You must also have the active SYNC Services Bluetooth-enabled cellular phone paired and connected to the system in order to connect to, and use, SYNC Services. See Using SYNC™ With Your Phone (page 263). Note: This feature does not function properly if you have enabled caller ID blocking on your cellular phone. Make sure your cellular phone is not blocking caller ID before using SYNC Services.


277


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


2. When prompted, say "Services". This


initiates an outgoing call to SYNC Services using your paired and connected Bluetooth-enabled cellular phone.


3. Once you connect to the service, follow


the voice prompts to request the desired service, such as Traffic or Directions. You can also say, "What are my choices?" to receive a list of available services from which to choose.


4. Say, "Services" to return to the Services


main menu or for help, say, "Help". Connecting to SYNC Services Using the Phone Menu 1. Press the phone button to enter the


phone menu.


2. Scroll to Services. 3. Press OK to confirm and enter the


Services menu. The display indicates the system is connecting.


4. Press OK. SYNC initiates the call to the


Services portal.


5. Once you connect to the service, follow


the voice prompts to request the desired service, such as Traffic or Directions. You can also say, "What are my choices?" to receive a list of available services from which to choose.


6. Say, "Services" to return to the Services


main menu or for help, say, "Help". Receiving Turn-by-Turn Directions 1. When connected to SYNC Services,


say "Directions" or "Business search". To find the closest business or type of business to your current location, just say "Business search" and then "Search near me". If you need further assistance in finding a location you can say "Operator" at any time within a


Note: The driver is ultimately responsible for the safe operation of the vehicle, and therefore, must evaluate whether it is safe to follow the suggested directions. Any navigation features provided are only an aid. Make your driving decisions based on your observations of local conditions and existing traffic regulations. Do not follow the route suggestions if doing so would result in an unsafe or illegal maneuver, place you in an unsafe situation, or if you would be directed into an area that you consider unsafe. Maps used by this system may be inaccurate because of errors, changes in roads, traffic conditions or driving conditions. Note: When you connect, the service uses GPS technology and advanced vehicle sensors to collect your vehicle's current location, travel direction and speed to help provide you with the directions, traffic reports, or business searches you request. Further, to provide the services you request, for continuous improvement, the service may collect and record call details and voice communications. For more information, see SYNC Services Terms and Conditions at www.SYNCMyRide.com. If you do not want Ford or its service providers to collect your vehicle travel information or other information identified in the Terms and Conditions, do not subscribe or use the service. SYNC Services uses advanced vehicle sensors, integrated GPS technology and comprehensive map and traffic data, to give you personalized traffic reports, precise turn-by-turn directions, business search, news, sports, weather and more. For a complete list of services, or to learn more, please visit www.SYNCMyRide.com. Connecting to SYNC Services Using Voice Commands 1. Press the voice button.


278


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


3. While on an active route, you can select


or say "Route summary" or "Route status" to view the Route Summary turn list or the Route Status ETA. You can also turn voice guidance on or off, cancel the route or update the route.


If you miss a turn, SYNC automatically asks if you want the route updated. Just say, "Yes" when prompted and the system sends a new route to your vehicle. Disconnecting from SYNC Services 1. Press and hold the phone button on


the steering wheel.


2. Say "Goodbye" from the SYNC


Services main menu.


Directions or Business search to speak with a live operator. The system may prompt you to speak with an operator when it has difficulty matching your voice request. The live operator can assist you by searching for businesses by name or by category, residential addresses by street address or by name or specific street intersections. Operator Assist is a feature of your SYNC Services subscription. For more information on Operator Assist, visit www.SYNCMyRide.com/support.


2. Follow the voice prompts to select your


destination. Once you select your destination, the system uploads your current vehicle location, calculates a route based on current traffic conditions and sends it back to your vehicle. After the route download is complete, the phone call automatically ends. You then receive audible and visual driving instructions as you travel toward your destination.


Personalizing


Push to interrupt


Portable


SYNC Services quick tips You can personalize your Services feature to provide quicker access to your most used or favorite information. You can save address points such as work or home. You can also save favorite information like sports teams or a news category. You can learn more about personalization by logging onto www.SYNCMyRide.com. Press the voice button at any time (while connected to SYNC Services) to interrupt a voice prompt or an audio clip (such as a sports report) and say your voice command. Your subscription is associated with your Bluetooth- enabled cellular phone number, not your VIN (Vehicle Identification Number). You can pair and connect your phone to any vehicle equipped with SYNC Services and continue enjoying your personalized services. You can even access your account outside your vehicle. Just use the number on your phone's call history. Traffic and Directions features do not function properly but information services and the 411 connect and text message features are available.


279


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


To Access Using the Media Menu 1. Press the AUX button on the center


2. Press MENU to access the SYNC


console.


menu.


3. Select "SYNC-Media" by pressing OK. 4. Scroll to Mobile Apps and press OK to access a list of available applications.


5. Scroll through the list of available


applications and press OK to select a particular app.


6. Once an app is running through SYNC,


you can access an app’s menu by pressing the MENU button to first access the SYNC menu.


7. Select "SYNC-Media" by pressing OK. 8. Scroll until " Menu" is displayed (such as, Pandora Menu), then press OK. From here, you can access an application's features, such as Thumbs up and Thumbs down. For more information, please visit www.SYNCMyRide.com.


To Access Using Voice Commands 1. Press the voice icon. 2. When prompted, say "Mobile Apps". 3. Say the name of the application after


the tone.


4. The app should start. While an app is running through SYNC, you can press the voice button and speak commands specific to the app, such as "Play Station Quickmix". Say "Help" to discover available voice commands.


SYNC AppLink Note: This feature is only available in the United States. Note: You must pair and connect your smartphone to SYNC to access AppLink. Note: iPhone users need to connect the phone to the USB port in order to start the application. We recommend you lock your iPhone after starting an application. Note: The AppLink feature is not available if your vehicle is equipped with the MyFord Touch or MyLincoln Touch system. Note: Depending on your display type, you can access AppLink from the media menu, the phone menu, or by using voice commands. Once an app is running through AppLink, you can control main features of the app through voice commands and steering wheel controls. To Access Using the Phone Menu 1. Press the phone button to access the


SYNC phone menu on-screen.


2. Scroll to Mobile Apps and press OK to access a list of available applications.


3. Scroll through the list of available


applications and press OK to select a particular app.


4. Once an app is running through SYNC,


you can access an app’s menu by pressing the MENU button to first access the SYNC menu.


5. Select "SYNC-Media" by pressing OK. 6. Scroll until " Menu" is displayed (such as, Pandora Menu), then press OK. From here, you can access an application's features, such as Thumbs up and Thumbs down. For more information, please visit www.SYNCMyRide.com.


280


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


USING SYNC™ WITH YOUR MEDIA PLAYER You can access and play music from your digital music player over your vehicle's speaker system using the system's media menu or voice commands. You can also sort and play your music by specific categories, such as artist and album. SYNC is capable of hosting nearly any digital media player including: iPod®, Zune™, Plays from device players, and most USB drives. SYNC also supports audio formats, such as MP3, WMA, WAV and ACC. Connecting Your Digital Media Player to the USB Port Note: If your digital media player has a power switch, make sure you switch it on before plugging it in. To Connect Using Voice Commands 1. Plug the device into the USB port. 2. Press the voice icon and when


prompted, say "USB".


3. You can now play music by saying any


of the appropriate voice commands. See the media voice commands.


To Connect Using the System Menu 1. Plug the device into the USB port. 2. Press AUX and then MENU to enter


the media menu.


3. Scroll to Select Source. Press OK. 4. Scroll to USB. Press OK. 5. Depending on how many digital media


files are on your connected device, Indexing may appear in the radio display. When indexing is complete, the screen returns to the Play menu.


Tracks Explore USB Similar Music


Press OK and scroll through selections of: • Play All • Albums • Genres • Playlists • • • • Return What's Playing? At any time when a track is playing, you can press the voice icon and ask the system "What's playing?". The system reads the metadata tags (if populated) of the playing track to you. Media Voice Commands


Press the voice icon. When prompted, say "USB", then any of the following:


"USB"


"Autoplay off" "Autoplay on" "Connections"


"Pause" "Play"


"Play album "1,2


"Play all"


"Play artist "1,2


"Play genre "1,2


"Play next folder"3
"Play next track"


281


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


E142599 SYNC™


"USB"


"Play playlist "1,2


"Play previous folder"3
"Play previous track"


"Play song "1,2


"Play track "1,2


"Refine album "1,2


"Refine artist "1,2


"Refine song "1,2


"Refine track "1,2


"Repeat off" "Repeat on"


"Search album "1,2


"USB"


"Search artist "1,2


"Search genre "1,2


"Search song "1,2


"Search track "1,2


"Shuffle off" "Shuffle on"


"Similar music" "What's playing?"


1 is a dynamic listing, meaning that it could be the name of anything, such as a group, artist or song. 2 This voice command is not available until indexing is complete. 3 This voice command is only available in folder mode.


"Autoplay"


"Search genre" or "Play genre"


"Similar music"


Voice command guide


Turn autoplay on to listen to music processed during indexing. Turn autoplay off to allow the indexing process to finish before the system plays any of your music.* The system searches all the data from your indexed music and, if available, begins to play the chosen type of music. You can only play genres of music that are present in the GENRE metadata tags that you have on your digital media player. The system compiles a playlist and then plays music similar to what is currently playing from the USB port using indexed metadata information.


282


Fiesta (CCT) Vehicles Built From: 01-04-2013, Vehicles Built Up To: 31-12-2013


SYNC™


Voice command guide


"Search" or "Play" artist, track or album "Refine"


The system searches for specific artist, track or album information from the music indexed through the USB port. This allows you to make your previous command more specific. For example, if you asked to search and play all

Loading...
x