2002 Ford Explorer Owners Manual

Volume/powercontrol Press the control to turn the audio system on or off.

VOL - PUSH ON

Turn the control to raise or lower volume.

VOL - PUSH ON

If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on.

55

Controls and features

AM/FMselect The AM/FM select control works in radio and tape modes.

AM

FM

AM/FMselectinradiomode This control allows you to select AM or FM frequency bands. Press the AM control to select from AM selections, and press the FM control to select from FM1 or FM2 memory preset stations. AM/FMselectintapemode Press this control to stop tape play and begin radio play. Tuneadjust The tune control works in radio mode. Tuneadjustinradiomode † Press

to move to the next

frequency down the band (whether or not a listenable station is located there). Hold the control to move through the frequencies quickly.

† Press

to move to the next frequency up the band (whether or not

a listenable station is located there). Hold for quick movement.

Seekfunction The seek function control works in radio mode. Seekfunctioninradiomode † Press

to find the next listenable station down the frequency band.

† Press

to find the next

listenable station up the frequency band.

56

Controls and features

Scanfunction The scan function works in radio mode.

SCAN

Scanfunctioninradiomode Press the SCAN control to hear a brief sampling of all listenable stations on the frequency band. Press the SCAN control again to stop the scan mode. Radiostationmemorypreset The radio is equipped with six station memory preset controls. These controls can be used to select up to six preset AM stations and twelve FM stations (six in FM1 and six in FM2). Settingmemorypresetstations 1. Select the frequency band with the AM or the FM select control. 2. Select a station. Refer to Tune adjust or Seek function for more information on selecting a station. 3. Press and hold a memory preset control until the sound returns, indicating the station is held in memory on the control you selected.

Bassadjust The bass adjust control allows you to increase or decrease the audio system’s bass output.

BASS

57

Controls and features

Trebleadjust The treble adjust control allows you to increase or decrease the audio system’s treble output.

Speakerbalanceadjust Speaker sound distribution can be adjusted between the right and left speakers.

Speakerfadeadjust Speaker sound can be adjusted between the front and rear speakers.

Tapeselect † To enter tape mode while in radio

mode, press the TAPE AMS control.

58

TREB

BAL

FADE

CLK

TAPE AMS

Controls and features

CLK

TAPE AMS

AutomaticMusicSearch The Automatic Music Search feature allows you to quickly locate the beginning of the tape selection being played or to skip to the next selection. To activate the feature, momentarily depress the TAPE AMS button. Then, press either REW (for the beginning of the current selection) or FF (to advance to the next selection). The tape deck stops and returns to play mode when the AMS circuit senses a blank section on the tape. In order to ensure proper operation of the AMS feature, the tape MUST have a blank section of at least four seconds duration between programs. Rewind The rewind control works in tape mode. To rewind in tape mode, press the REW control. Fastforward The fast forward control works in tape mode. To fast forward in tape mode, press the FF control. In the tape mode, tape direction will automatically reverse when the end of the tape is reached. Tapedirectionselect Press SIDE and 1–2 at the same time to play the alternate side of a tape.

SIDE 1 - 2
REW FF

SIDE REW

1 - 2
FF

SIDE REW

1 - 2
FF

59

Controls and features

Ejectfunction Press the control to stop and eject a tape.

EJ

control to activate (and deactivate) Dolbyt noise

DolbyT noisereduction Dolbyt noise reduction operates only in tape mode. Dolbyt noise reduction reduces the amount of hiss and static during tape playback. Press the reduction. Dolbyt noise reduction is manufactured under license from Dolbyt Laboratories Licensing Corporation. “Dolbyt” and the double-D symbol are registered trademarks of Dolby Laboratories Licensing Corporation. Settingtheclock Press CLK to toggle between listening frequencies and clock mode while in radio mode. To set the hour, press and hold the CLK control and press the SEEK control:

CLK

TAPE AMS

† †

to decrease hours and to increase hours.

To set the minute, press and hold the CLK control and press the TUNE control:

60

SEEK

TUNE DISCS

CLK

TAPE AMS

† †

to decrease minutes and to increase minutes.

Controls and features

SEEK

TUNE DISCS

The CLK control will allow you to switch between media display mode (radio station, stereo information, etc.) and clock display mode (time). When in clock mode, the media information will display for 10 seconds, when the radio is turned on, and then revert to clock information. Any time that the media is changed, (new radio station, etc.), the media information will again display for 10 seconds before reverting back to the clock. In media mode, the media information will always be displayed.

AM/FM Stereo / Single CD Radio

VOL - PUSH ON

AM FM

CD

BASS

TREB

FM1

ST

BAL

FADE

SEEK

TUNE DISCS

DISC

SCN

CLK

EJ

COMP

CD

CD

SHUFFLE

Volume/powercontrol Press the control to turn the audio system on or off.

VOL - PUSH ON

61

Controls and features

Turn the control to raise or lower volume.

VOL - PUSH ON

If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on. AM/FMselect The AM/FM select control works in radio and CD modes.

AM FM

CD

AM/FMselectinradiomode This control allows you to select AM or FM frequency bands. Press the control to switch between AM, FM1 or FM2 memory preset stations. AM/FMselectinCDmode Press this control to stop CD play and begin radio play. Tuneadjust The tune control works in radio mode. Tuneadjustinradiomode † Press

to move to the next

frequency down the band (whether or not a listenable station is located there). Hold the control to move through the frequencies quickly.

SEEK

TUNE DISCS

to move to the next frequency up the band (whether or not

† Press

a listenable station is located there). Hold for quick movement.

Seekfunction The seek function control works in radio or CD mode.

62

Controls and features

Seekfunctioninradiomode † Press

to find the next listenable station down the frequency band.

† Press

to find the next

listenable station up the frequency band.

SeekfunctioninCDmode † Press † Press

selection.

to listen to the next

to listen to the previous

selection.

Scanfunction The scan function works in radio or CD mode.

SEEK

TUNE DISCS

SEEK

TUNE DISCS

SCN

Scanfunctioninradiomode Press SCN to hear a brief sampling of all listenable stations on the frequency band. Press SCN again to stop the scan mode. ScanfunctioninCDmode Press SCN to hear a short sampling of all selections on the CD. (The CD scans in a forward direction, wrapping back to the first track at the end of the CD.) To stop on a particular selection, press the control again. Bassadjust The bass adjust control allows you to increase or decrease the audio system’s bass output.

BASS

63

Controls and features

Trebleadjust The treble adjust control allows you to increase or decrease the audio system’s treble output.

Speakerbalanceadjust Speaker sound distribution can be adjusted between the right and left speakers.

Speakerfadeadjust Speaker sound can be adjusted between the front and rear speakers.

CDselect † To begin CD play (if CD[s] are loaded), press the CD control. The first track of the disc will begin playing. After that, CD play will begin where it stopped last.

64

TREB

BAL

FADE

AM FM CD

Controls and features

Do not insert any promotional (odd shaped or sized) discs, or discs with removable labels into the CD player as jamming may occur. Rewind The rewind control works in CD mode. To rewind in CD mode, press the CD control (preset 1). Press the control again to deactivate rewind mode. Fastforward The fast forward control works in CD mode. To fast forward in CD changer mode, press the CD control (preset 2). Press the control again to deactivate fast forward mode. Ejectfunction Press the control to stop and eject a CD.

CD

CD

EJ

COMP

Compressionfeature Compression adjust brings soft and loud CD passages together for a more consistent listening level. Press the COMP control to activate and deactivate compression adjust. Shufflefeature The shuffle feature operates in CD mode and plays all tracks on the current disc in random order. Press the SHUFFLE control to start this feature. Random order play will continue until the SHUFFLE control is pressed again.

SHUFFLE

65

SCN

CLK

SEEK

TUNE DISCS

SCN

CLK

SEEK

TUNE DISCS

Controls and features

Settingtheclock Press CLK to toggle between listening frequencies and clock mode while in radio mode. To set the hour, press and hold the CLK control.

Press the SEEK control: † †

to decrease hours and to increase hours.

To set the minute, press and hold the CLK control.

Press the TUNE control: † †

to decrease minutes and to increase minutes.

66

Controls and features

Premium AM/FM Stereo/Cassette/Single CD

VOL PUSH ON

DISC

FM 1
AMC

BL

ST

RF

DOLBY B NR

EJ

TAPE

CD

AM

FM

SEEK

TUNE

REW

SCAN

BASS

TREB

FF

SIDE 1-2

SEL

EJ

MUTE

AUTO

CLK

Volume/powercontrol Press the control to turn the audio system on or off. Audio power can also be turned on by pressing the AM/FM select control or the TAPE/CD select control.

Turn control to raise or lower volume.

BAL

FADE

COMP

SHUFFLE

VOL - PUSH ON

VOL - PUSH ON

If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on.

67

Controls and features

AM/FMselect The AM/FM select control works in radio, tape and CD modes.

AM

FM

AM/FMselectinradiomode This control allows you to select AM or FM frequency bands. Press the control to switch between AM, FM1 or FM2 memory preset stations. AM/FMselectintapemode Press this control to stop tape play and begin radio play. AM/FMselectinCDmode Press this control to stop CD play and begin radio play. Tuneadjust The tune control works in radio mode. Tuneadjustinradiomode † Press

to move to the next

frequency down the band (whether or not a listenable station is located there). Hold the control to move through the frequencies quickly.

† Press

to move to the next frequency up the band (whether or not

a listenable station is located there). Hold for quick movement.

Seekfunction The seek function control works in radio, tape or CD mode. Seekfunctioninradiomode † Press

to find the next listenable station down the frequency band.

† Press Seekfunctionintapemode † Press † Press

68

to find the next listenable station up the frequency band.

to listen to the previous selection on the tape. to listen to the next selection on the tape.

SeekfunctioninCDmode † Press

to seek to the previous

track of the disc. If a selection has been playing for three seconds or more and you press from the beginning.

† Press

Controls and features

, the CD will replay that selection

to seek forward to the next track of the disc. After the last

track has been completed, the first track of the current disc will automatically replay.

Scanfunction The scan function works in radio, tape or CD mode.

SCAN

Scanfunctioninradiomode Press the SCAN control to hear a brief sampling of all listenable stations on the frequency band. Press the control again to stop the scan mode. Scanfunctionintapemode Press the SCAN control to hear a short sampling of all selections on the tape. (The tape scans in a forward direction. At the end of the tape’s first side, direction automatically reverses to the opposite side of the tape.) To stop on a particular selection, press the control again. ScanfunctioninCDmode Press the SCAN control to hear a short sampling of all selections on the CD. (The CD scans in a forward direction, wrapping back to the first track at the end of the CD.) To stop on a particular selection, press the control again. Radiostationmemorypreset The radio is equipped with six station memory preset controls. These controls can be used to select up to six preset AM stations and twelve FM stations (six in FM1 and six in FM2). Settingmemorypresetstations 1. Select the frequency band with the AM/FM select control. 2. Select a station. Refer to Tune adjust or Seek function for more information on selecting a station.

AM

FM

69

Controls and features

3. Press and hold a memory preset control until the sound returns, indicating the station is held in memory on the control you selected.

REW

FF

SIDE 1-2

COMP

SHUFFLE

AUTO

Autosetmemorypreset Autoset allows you to set strong radio stations without losing your original manually set preset stations. This feature is helpful on trips when you travel between cities with different radio stations. Startingautosetmemorypreset 1. Select a frequency using the AM/FM select controls. 2. Press the control. 3. When the first six strong stations are filled, the station stored in memory preset control 1 will start playing. If there are less than six strong stations available on the frequency band, the remaining memory preset controls will all store the last strong station available. These stations are temporarily stored in the memory preset controls (until deactivated) and are accessed in the same manner as your original presets. To deactivate autoset and return to your audio system’s manually set memory stations, press the AUTO control again. Bassadjust The bass adjust control allows you to increase or decrease the audio system’s bass output.

CLK

BASS

TREB

70

Controls and features

Press the BASS control then press: † to decrease the bass output

and

†

to increase the bass output.

SEL

Trebleadjust The treble adjust control allows you to increase or decrease the audio system’s treble output. Press the TREB control then press: † to decrease the treble output

and

†

to increase the treble output.

BASS

TREB

SEL

Speakerbalanceadjust Speaker sound distribution can be adjusted between the right and left speakers. Press the BAL control then press: † †

to shift sound to the left and to shift sound to the right.

BAL

FADE

SEL

71

Controls and features

Speakerfadeadjust Speaker sound can be adjusted between the front and rear speakers. Press the FADE control then press: †

to shift the sound to the

front and

to shift the sound to the rear.

†

BAL

FADE

SEL

Tape/CDselect † To begin tape play (with a tape loaded into the audio system) while in the radio or CD mode, press the TAPE control. Press again during rewind or fast forward to stop the rewind or fast forward function.

TAPE

CD

† To begin CD play (if CD(s) are loaded), press the CD control. The first track of the disc will begin playing. If returning from radio or tape mode, CD play will begin where it stopped last.

TAPE

CD

Press the CD control to toggle between single CD and CD changer play (if equipped). Do not insert any promotional (odd shaped or sized) discs, or discs with removable labels into the CD player as jamming may occur. Rewind The rewind control works in tape and CD modes. † In tape mode, radio play will

REW

continue until rewind is stopped (with the TAPE control) or the beginning of the tape is reached. † In CD mode, pressing the REW control rewinds the CD within the

current track.

72

Fastforward The fast forward control works in tape and CD modes. † In the tape mode, tape direction will automatically reverse when the end of the tape is reached.

Controls and features

FF

† In CD mode, pressing the control fast forwards the CD within the

current track.

Tapedirectionselect Press SIDE 1–2 to play the alternate side of a tape.

Ejectfunction Press the EJ control to stop and eject a tape.

Press the EJ control to stop and eject a CD.

SIDE 1-2

EJ

EJ

DolbyT noisereduction Dolbyt noise reduction operates in tape mode. Dolbyt noise reduction reduces the amount of hiss and static during tape playback. Press the reduction. Dolbyt noise reduction is manufactured under license from Dolbyt Laboratories Licensing Corporation. “Dolbyt” and the double-D symbol Corporation.

control to activate (and deactivate) the Dolbyt noise

are registered trademarks of Dolbyt Laboratories Licensing

73

Controls and features

COMP

Compressionadjust Compression adjust brings soft and loud CD passages together for a more consistent listening level. Press the COMP control to activate and deactivate compression adjust. Shufflefeature The shuffle feature operates in CD mode and plays all tracks in random order. Press the SHUFFLE control to start this feature. Random order play will continue until the SHUFFLE control is pressed again. Settingtheclock To set the hour, press and hold the CLK control and press SEEK:

SHUFFLE

AUTO

CLK

AUTO

CLK

† †

to decrease hours and to increase hours.

To set the minute, press and hold the CLK control and press TUNE:

74

Controls and features

to decrease minutes and to increase minutes.

† † If your vehicle has a separate clock, (other than the digital radio display), the CLK control will not function in the above manner. The CLK control will allow you to switch between media display mode (radio station, stereo information, etc.) and clock display mode (time). When in clock mode, the media information will display for 10
seconds, when the radio is turned on, and then revert to clock information. Any time that the media is changed, (new radio station, etc.), the media information will again display for 10 seconds before reverting back to the clock. In media mode, the media information will always be displayed. Mutemode Press the MUTE control to mute the playing media. Press the MUTE control again to return to the playing media.

AUTO

CLK

EJ

MUTE

75

Controls and features

Audiophile AM/FM Stereo In Dash Six CD Radio

PremiumAM/FMStereoInDashSixCDRadio

SHUF

SCAN

DISC TUNE

SEEK

REW

FF

COMP

MUTE

EJ

BASS

BAL

SEL

TREB

FADE

MENU

LOAD

PUSH ON

AM FM

CD

76

Controls and features

Volume/powercontrol Press the control to turn the audio system on or off. Turn the control to raise or lower volume.

PUSH ON

If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on. Speedsensitivevolume With this feature, radio volume changes automatically and slightly with vehicle speed to compensate for road and wind noise. The recommended level for speed sensitive volume is from level 1
through level 3. Level 0 turns the speed sensitive volume off and level 7
is the maximum setting. To engage the speed sensitive volume feature, press and hold the volume control for five seconds (with the radio on), then press: †

to increase volume

PUSH ON

†

compensation.

to decrease or shut off the

volume compensation.

The selected level will appear in the display. AM/FMselect The AM/FM select control works in radio and CD modes.

SEL

AM FM

CD

AM/FMselectinradiomode This control allows you to select AM or FM frequency bands. Press the control to switch between AM, FM1 or FM2 memory preset stations. AM/FMselectinCDmode Press this control to stop CD play and begin radio play.

77

Controls and features

Tune/discadjust The tune control works in radio or CD mode. Tuneadjustinradiomode † Press

to move to the next

frequency down the band (whether or not a listenable station is located there). Hold the control to move through the frequencies quickly.

DISC TUNE

† Press

to move to the next frequency up the band (whether or not

a listenable station is located there). Hold for quick movement.

DiscadjustforCDmode † Press

to select the previous disc. (Play will begin on the first track of the disc unless shuffle mode is engaged.) Refer to Shuffle feature for more information. Hold the control to continue reversing through the discs.

DISC TUNE

† Press

through the remaining discs.

to select the next disc. Hold the control to fast-forward

Seekfunction The seek function works in radio or CD mode. Seekfunctioninradiomode † Press

to find the next listenable station down the frequency band. SEEK DOWN will display.

† Press

SEEK UP will display.

78

to find the next listenable station up the frequency band.

Controls and features

SeekfunctioninCDmode † Press

to seek to the previous

track of the current disc. If the beginning of the disc is reached, the CD player seeks to the beginning of the last track on the current disc and begins playing.

to seek forward to the next track of the current disc. After the last track has been completed, the first track of the current disc will automatically replay.

† Press

Scanfunction The scan function works in radio or CD mode.

Scanfunctioninradiomode Press the SCAN control to hear a brief sampling of all listenable stations on the frequency band. Press the SCAN control again to stop the scan mode. ScanfunctioninCDmode Press the SCAN control to hear a short sampling of all selections on the CD. (The CD scans in a forward direction, wrapping back to the first track at the end of the CD.) To stop on a particular selection, press the control again. Radiostationmemorypreset The radio is equipped with six station memory preset controls. These controls can be used to select up to six preset AM stations and twelve FM stations (six in FM1 and six in FM2). Settingmemorypresetstations 1. Select the frequency band with the AM/FM select control. Press the AM/FM control to toggle between AM, FM1, or FM2. 2. Press the SEEK control to access the next listenable station up or down the frequency band. Press the TUNE control to go up or down the listening band in individual increments. 3. Select a station. Refer to Seek function for more information on selecting a station.

79

Controls and features

4. Press and hold a memory preset control. The playing media will mute momentarily. When the sound returns, the station is held in memory on the control you selected. The display will read SAVED.

Autostore Autostore allows you to set the strongest local radio stations without losing your original manually set preset stations. This feature is helpful on trips when you travel between cities with different radio stations. Startingautostore 1. Press and momentarily hold the AM/FM control. 2. AUTOSET will flash in the display as the frequency band is scrolled through. 3. When the six strongest stations are filled, the station stored in memory preset control 1 will start playing. If there are fewer than six strong stations available on the frequency band, the remaining memory preset controls will all store the last strong station available. To deactivate autoset and return to your audio system’s manually set memory stations, press the AM/FM control again.

AM FM

CD

80

Controls and features

CD

AM FM

CDselect CD mode may be entered by pressing the CD control and the LOAD control. Load the CD into the audio system. The first track of the disc will begin playing. After that, CD play will begin where it stopped last. If an alternative CD is desired, press the corresponding preset control (1–6) of a loaded CD, or press the TUNE control to access the other loaded CDs. NO CD will display if the CD control is activated when there is not a CD present in the audio system. NO CD will illuminate in the display if the CD control and a present number (that is currently empty) are pressed. The system will play the next available disc. CD units are designed to play commercially pressed 12 cm (4.75 in) audio compact discs only. Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Irregular shaped CDs, CDs with a scratch protection film attached, and CDs with homemade paper (adhesive) labels should not be inserted into the CD player. The label may peel and cause the CD to become jammed. It is recommended that homemade CDs be identified with permanent felt tip marker rather than adhesive labels. Ball point pens may damage CDs. Please contact your dealer for further information. Displaydescription Six circles are always lit in the digital display. These signify the six CD slots in the audio system. When a disc is loaded into a particular slot (1–6), the number inside that specific circle lights. If the circle is empty, there is no CD in that particular slot. Load The load feature allows you to load single CDs into the player internal to the radio. This six disc CD player is equipped with a CD door. Compact discs should only be inserted into the player after the CD door has been opened by the player. Do not attempt to force the door open. Compact discs should only be loaded by pressing the LOAD control.

LOAD

81

Controls and features

Press the LOAD control. (You can choose which slot will be loaded by pressing the desired preset number. If you do not choose a slot, the system will choose the next available one.) Wait until the CD door opens. Load the CD into the player. LOADING CD# is displayed. When the CD has been loaded, the door will close and the CD will begin to play. For example, to load a CD into slot 2, press the LOAD control and then press preset 2.

LOAD

Autoload This feature allows you to autoload up to 6 discs into the multi disc CD player internal to the radio. Press and hold the LOAD control until AUTOLOAD # is displayed. The CD door will open. Load the desired discs, one at a time. The CD is loaded into position and the audio system will display CD#. Each time the CD door opens, INSERT CD# is displayed. The door will close and the player will move to the next slot after each disc has been loaded. The process is repeated until all 6 slots are full. The audio system plays the last CD loaded and the display is updated. If some slots are already full and autoload is activated, the system will fill all empty slots.

Eject Press the EJ control to stop and eject a CD. You can choose which CD will be ejected by pressing the EJ control and the desired preset number (1–6). For example, to eject CD 2, press the EJ control and then press the preset 2 control. If you do not choose a specific CD, the player will eject the current CD. If a CD is ejected and not removed from the door of the CD player, the player will automatically reload the CD. This feature may be used when the ignition is ON or OFF.

EJ

Autoeject Press and momentarily hold the EJ control to engage auto eject. All CDs which are present in the player will be ejected one at a time. If a CD is ejected and not removed from the door of the CD player, the player will automatically reload the CD. This feature may be used when the ignition is ON or OFF.

EJ

82

Controls and features

FF

FF

REW

REW

Rewind The rewind control works in CD modes. Press and hold the REW control until the desired selection is reached. If the beginning of the disc is reached, the CD will begin play at the first track. Release the control to disengage rewind mode. When in rewind mode, your audio system will automatically lower the volume level of the playing media. Fastforward The fast forward control works in CD modes. Press and hold the FF control until the desired selection is reached. If the end of the disc is reached, the CD will return to the first track. Release the control to disengage fast forward mode. When in fast forward mode, your audio system will automatically lower the volume level of the playing media. Shufflefeature Press the SHUF control until the desired shuffle mode is displayed. The audio system will then engage the desired shuffle mode. When engaged, the shuffle feature has two different modes: SHUFFLE DISC and SHUFFLE TRK. SHUFFLE DISC randomly plays tracks from all the discs presently in the audio system. SHUFFLE TRK plays all the tracks on the current disc in random order. Compressionfeature(ifequipped) The compression feature operates in CD mode and brings soft and loud CD passages together for a more consistent listening level.

MENU

SEL

On Audiophile audios, press the MENU control until compression status is displayed. Press the SEL control to enable the compression feature

83

Controls and features

SEL

TREB

BASS

when COMP OFF is displayed. Press the SEL control again to disable the feature when COMP ON is displayed. On Premium audios, press the COMP control until COMP ON is displayed. Bassadjust The bass adjust control allows you to increase or decrease the audio system’s bass output. Press the BASS control. Use the SEL control to increase or decrease the amount of bass. Trebleadjust The treble adjust control allows you to increase or decrease the audio system’s treble output. Press the TREB control. Use the SEL control to increase or decrease the amount of treble. Speakerbalanceadjust Speaker sound distribution can be adjusted between the right and left speakers. Press the BAL control. Use the SEL control to adjust the sound between the left and right speakers. Speakerfadeadjust Speaker sound can be adjusted between the front and rear speakers. Press the FADE control. Use the SEL control to adjust the sound between the front and rear speakers.

BASS

TREB

FADE

FADE

BAL

BAL

SEL

SEL

SEL

84

Controls and features

Menumode The MENU control allows you to access many different features within your audio system. There are three sets of menus available depending upon which mode or feature is activated. While in FM mode, two menus are available. If RDS is turned OFF, you can access the following: † SELECT HOURS — Refer to Setting the clock. † SELECT MINUTES — Refer to Setting the clock. † RDS OFF — Refer to Radio data system feature. If RDS is turned ON, you can access the following: † TRAFFIC ON/OFF-Refer to Traffic announcements. † FIND type-Refer to Program type. † SHOW (NAME, TYPE, NONE)- Refer to Radio data system feature. † RDS ON— Refer to Radio data system feature. † SELECT HOURS — Refer to Setting the clock. † SELECT MINUTES —Refer to Setting the clock. When in CD mode, you can access: SELECT HOURS, SELECT MINUTES or COMP ON/OFF. SELECT HOURS, SELECT MINUTES— Allows you to adjust the hours and minutes. Refer to Setting the clock. TRAFFIC ON/OFF— Traffic announcements can be programmed as local or distant. Refer to Traffic announcements. RDS ON/OFF— This feature allows your audio system to receive text information from RDS-equipped FM radio stations. Refer to Radio Data System feature. FIND type — Allows you to select your desired FM program type and search for that selection. SHOW — Allows you to select from NAME (displays the name of the radio station), TYPE (displays the RDS program type: rock, jazz, etc.), or NONE (deactivates the RDS display).

85

Controls and features

SEL

MENU

Radiodatasystem(RDS)feature This feature allows your audio system to receive text information from RDS-equipped FM radio stations. To activate RDS: † When in FM mode, press the MENU control until RDS OFF displays. † Press the SEL control to engage this feature (RDS ON). RDS features: Once the RDS feature is on, press the MENU control to scroll through the following selections: Trafficannouncements This feature allows you to hear traffic announcements while in CD mode. These announcements are broadcast by traffic capable RDS stations. When in this mode, traffic announcements will interrupt radio and CD play. † Press the MENU control until TRAFFIC is displayed. † Press the SEL control to engage the feature. The display will read

TRAFFIC ON.

This feature also allows you to control the volume of traffic announcements. With the display reading TRAFFIC ON, adjust the volume using the volume control to the desired level. The volume level will show at the bottom of the display. Interrupting traffic announcements will be at the selected volume level. To disengage the feature, press the MENU control until TRAFFIC ON displays. Press the SEL control. The display will read TRAFFIC OFF. Traffic announcements are not available in most U.S. markets. Programtype This feature allows you to search for RDS stations selectively by their program type.

86

Controls and features

MENU

Press the MENU control until FIND program type is displayed. Use the SEL control to select the program type. With the feature on, use the SEEK or SCAN control to find the desired program type from the following selections: † Classic † Country † Info † Jazz † Oldies † R & B † Religious † Rock † Soft † Top 40
Show This feature allows you to select the type of RDS broadcast information the radio will regularly show in the display.

MENU

SEL

SEL

MENU

With RDS activated, press the MENU control until SHOW is displayed. Use the SEL control to select TYPE (displays the RDS program type: rock, jazz, etc), NAME (displays the name of the radio station) or NONE (deactivates the RDS display). Digitalsignalprocessing(ifequipped) The digital signal processing (DSP) feature allows you to change the signal mode to suit your listening tastes.

SEL

87

Controls and features

Press the DSP control to access one of the following modes: † DSP OFF † SIGNAL MODE † OCCUPANCY MODE Use the SEL control to select the

DSP

SEL

SEL

desired signal mode (the selected mode will appear in the display). The following signal modes can be selected: † DSP OFF—disengages the feature † NEWS—”voice-only” type of sound with a limited audio band † JAZZ CLUB—jazz club with clearly reflected sounds † HALL—rectangular concert hall capacity of about 2 000
† CHURCH—church with a high vault † STADIUM—outdoor stadium with a capacity of about 30 000
Press the DSP control again to access the occupancy modes. Use the SEL control to optimize the sound based upon the occupants in the vehicle. The following occupancy modes can be selected: † ALL SEATS † DRIVER SEAT † REAR SEATS Mutemode Press the control to mute the playing media. Press the control again to return to the playing media.

Settingtheclock Press the MENU control until SELECT HOUR or SELECT MINUTE is displayed. (The menu mode must be engaged to enable clock mode).

88

Controls and features

SEL

Use the SEL control to manually set the time. † Press † Press

hours/minutes.

to decrease

to increase

hours/minutes.

Press the MENU control again to disengage the clock mode.

Troubleshooting the CD changer (if equipped)

The laser beam used in the compact disc player is harmful to the eyes. Do not attempt to disassemble the case.

If sound skips: † You may be traveling on a rough road, playing badly scratched discs or

the disc may be dirty. Skipping will not scratch the discs or damage the player.

If your changer does not work, it may be that: † A disc is already loaded where you want to insert a disc. † The disc is inserted with the label surface downward. † The disc is dusty or defective. † The player’s internal temperature is above 60°C (140°F). Allow the † A disc with format and dimensions not within industry standards is

player to cool down before operating.

inserted.

Cleaning compact discs Inspect all discs for contamination before playing. If necessary, clean discs only with an approved CD cleaner and wipe from the center out to the edge. Do not use circular motion.

CD and CD changer care † Handle discs by their edges only. Never touch the playing surface. † Do not expose discs to direct sunlight or heat sources for extended † Do not insert more than one disc into each slot of the CD changer

periods of time.

magazine.

89

Controls and features

CD units are designed to play commercially pressed 12 cm (4.75 in) audio compact discs only. Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in Ford CD players. Irregular shaped CDs, CDs with a scratch protection film attached, and CDs with homemade paper (adhesive) labels should not be inserted into the CD player. The label may peel and cause the CD to become jammed. It is recommended that homemade CDs be identified with permanent felt tip marker rather than adhesive labels. Ball point pens may damage CDs. Please contact your dealer for further information.

Cleaning cassette player (if equipped) Clean the tape player head with a cassette cleaning cartridge after 10 to 12 hours of play in order to maintain the best sound and operation.

Cassette and cassette player care † Use only cassettes that are 90 minutes long or less. † Do not expose tapes to direct sunlight, high humidity, extreme heat or

extreme cold. Allow tapes that may have been exposed to extreme temperatures to reach a moderate temperature before playing. † Tighten very loose tapes by inserting a finger or pencil into the hole † Remove loose labels before inserting tapes. † Do not leave tapes in the cassette player for a long time when not

and turning the hub.

being played.

Radio frequency information The Federal Communications Commission (FCC) and the Canadian Radio and Telecommunications Commission(CRTC) establish the frequencies AM and FM stations may use for their broadcasts. Allowable frequencies are: AM 530, 540–1600, 1610 kHz FM 87.7, 87.9–107.7, 107.9 MHz Not all frequencies are used in a given area. Radioreceptionfactors Three factors can affect radio reception: † Distance/strength. The further an FM signal travels, the weaker it is. The listenable range of the average FM station is approximately 40 km

90

Controls and features

(24 miles). This range can be affected by “signal modulation.” Signal modulation is a process radio stations use to increase their strength/volume relative to other stations.

† Terrain. Hills, mountains and tall buildings between your vehicle’s antenna and the radio station signal can cause FM reception problems. Static can be caused on AM stations by power lines, electric fences, traffic lights and thunderstorms. Moving away from an interfering structure (out of its “shadow”) returns your reception to normal.

† Station overload. Weak signals are sometimes captured by stronger signals when you pass a broadcast tower. A stronger signal may temporarily overtake a weaker signal and play while the weak station frequency is displayed.

The audio system automatically switches to single channel reception if it will improve the reception of a station normally received in stereo.

Audio system warranties and service Refer to the Warranty Guide for audio system warranty information. If service is necessary, see your dealer or a qualified technician.

TURN SIGNAL CONTROL † Push down to activate the left † Push up to activate the right turn

turn signal.

signal.

91

Controls and features

POSITIONS OF THE IGNITION 1. OFF/LOCK, shuts off the engine and all accessories/locks the steering wheel, gearshift lever and allows key removal. 2. ACC, allows the electrical accessories such as the radio to operate while the engine is not running. 3. ON, all electrical circuits operational. Warning lights illuminated. Key position when driving. 4. START, cranks the engine. Release the key as soon as the engine starts.

SPEED CONTROL

To turn speed control on † Press ON. Vehicle speed cannot be controlled until the vehicle is traveling at or above 48 km/h (30 mph). Do not shift the gearshift lever into N (Neutral) with the speed control on.

Do not use the speed control in heavy traffic or

on roads that are winding, slippery, or unpaved.

92

To turn speed control off † Press OFF † Speed control automatically

defaults to OFF when the ignition is turn off.

Once speed control is switched off, the previously programmed set speed will be erased.

To set a speed † Press SET+. For speed control to operate, the speed control must be ON and the vehicle speed must be greater than 48 km/h (30 mph).

Controls and features

RES

SET

COAST

If you drive up or down a steep hill, your vehicle speed may vary momentarily slower or faster than the set speed. This is normal. Speed control cannot reduce the vehicle speed if it increases above the set speed going downhill. If your vehicle speed is faster than the set speed while driving downhill, you may want to shift to the next lower gear or apply the brakes to reduce your vehicle speed. If your vehicle slows down more than 16 km/h (10 mph) below your set speed on an uphill, your speed control will disengage. This is normal. Pressing RES will re-engage it.

Do not use the speed control in heavy traffic or on roads that are winding, slippery, or unpaved.

93

Controls and features

To set a higher set speed † Press and hold SET +. Release the control when the desired vehicle speed is reached or † Press and release SET + to operate the Tap-Up function. Each press will increase the set speed by 1.6 km/h (1 mph) or † Accelerate with your accelerator pedal. When the desired vehicle speed is reached, press and release SET +.

RES

SET

COAST

You can accelerate with the accelerator pedal at any time during speed control usage. Releasing the accelerator pedal will return your vehicle to the previously programmed set speed.

To set a lower set speed † Press and hold COAST/CST −. Release the control when the desired speed is reached or

† Press and release COAST/CST − to operate the Tap-Down function. Each press will decrease the set speed by 1.6 km/h (1 mph) or

† Depress the brake pedal. When

the desired vehicle speed is reached, press SET +.

RES

SET

COAST

RES

SET

COAST

94

Controls and features

To disengage speed control † Depress the brake pedal or

† Depress the clutch pedal (if

equipped).

Disengaging the speed control will not erase the previously programmed set speed.

Pressing OFF will erase the previously programmed set speed.

95

Controls and features

To return to a previously set speed † Press RES. For RES to operate, the vehicle speed must be faster than 48 km/h (30 mph).

RES

SET

COAST

Indicator light This light comes on when the vehicle speed control is engaged and actively controlling vehicle speed.

TILT/TELESCOPE STEERING COLUMN (IF EQUIPPED) Pull the lever down to unlock the tilt/telescope steering column. While the lever is in the down position, tilt and telescope the steering column to the desired orientation.

96

Controls and features

If your vehicle has the tilt-only steering column, pull the lever down to unlock the steering column. While the lever is in the down position, tilt the steering column to its desired orientation.

Lift the lever back to its original position to lock the steering column.

Never adjust the steering column when the vehicle is

moving.

HAZARD FLASHER

For information on the hazard flasher control, refer to Hazard flasher in the Roadside emergencies chapter.

WINDSHIELD WIPER/WASHER CONTROLS Rotate the windshield wiper control to the desired interval, low or high speed position. The bars of varying length are for intermittent wipers. When in this position rotate the control upward for fast intervals and downward for slow intervals.

97

Controls and features

Push (tap) the end of the stalk briefly for a single swipe (no wash). Push and hold for three swipes with wash. Push and hold for a longer wash (up to ten seconds).

Speed dependent wipers When the windshield wiper control is set on the intermittent settings, speed-sensitive front wipers automatically adjust as the vehicle’s speed changes.

Rear window wiper/washer controls For rear wiper operation, rotate the rear window wiper and washer control to the desired position. Select: INT 1 — 3–4 second interval rear wiper. INT 2 — 8–10 second interval rear wiper. OFF — Rear wiper and washer off. For rear wash cycle, rotate (and hold as desired) the rear wiper/washer control to either From either position, the control will automatically return to the INT 2
or OFF position.

position.

STEERING WHEEL CONTROLS (IF EQUIPPED) These controls allow you to operate some radio and climate control features.

98

Controls and features

Audio control features Press to select: † AM, FM1, FM2, † TAPE (if equipped), † CD (if equipped), or † DVD (if equipped).

In AM, FM1, or FM2 mode: † Press MEM to select preset

stations within the selected radio band.

In Tape mode: † Press MEM to select the next

selection on the tape.

In CD mode: † Press MEM to select the next

selection on the CD.

In any mode: † Press VOL + or − to adjust

volume.

99

Controls and features

Climate control features Press TMP + or - to adjust temperature.

Press

+ or - to adjust fan speed.

OVERHEAD CONSOLE (IF EQUIPPED) The appearance of your vehicle’s overhead console will vary according to your option package.

100

Controls and features

Storage compartment Press the latch to open the storage compartment.

Installing a garage door opener (if equipped) The storage compartment can be converted to accommodate a variety of aftermarket garage door openers: † Place the Velcro hook onto the

side of the aftermarket transmitter opposite of the button.

† Place the transmitter into storage

compartment, button down.

† Place the provided height

adaptors onto the back of the door as needed. † Close the door. † Press the depression in the door

to activate the transmitter.

101

Controls and features

Moon roof (if equipped) You can move the glass panel of the moon roof back to open or tilt up to ventilate the vehicle. To open the moon roof: The moon roof is equipped with an automatic, one-touch, express opening feature. Press and momentarily hold the rear portion of the control. To stop motion at any time during the one-touch opening, press the control a second time. To close the moon roof: Press and hold the front portion of the control until the glass panel stops moving. Once fully closed, the rear of the glass panel will appear higher than the front edge. To vent: To tilt the moon roof into the vent position (when the glass panel is closed), press and hold the front portion of the control. To close the moon roof from the vent position, press and hold the rear portion of the control until the glass panel stops moving. If the battery is disconnected, discharged, or a new battery is installed, the moon roof needs to be opened to the vent position to reset the moon roof positions. The moon roof has a sliding shade that can be opened or closed when the glass panel is shut. To close the shade, pull it toward the front of the vehicle.

Do not let children play with the moon roof. They may seriously hurt themselves.

Interior Lamps Domelampsandmaplamps The front map/dome lamp is located overhead between the driver and the passenger seats. If the vehicle is equipped with a moon roof or large overhead console, the map/dome lamp is located above the second row seat.

102

Controls and features

The map lamp controls are located on the dome lamp. Press the controls on either side of each lens on each map lamp to activate the lamps.

All vehicles are equipped with a cargo lamp, which is located overhead in the rear cargo area and above the the third row seat (if equipped). The cargo lamp will stay on if the control is moved to the passenger side position. When the control is in the middle position, the lamp will only come on when a door is opened. If the control is moved to the driver’s side position, the lamp will not come on at all. With the control in the middle position, the dome lamp will illuminate whenever a front door is opened. If either front door has been opened from the outside, the lamp will remain on for 25 seconds after the door is shut. If any other door has been opened from the inside, the lamp will shut off immediately after the door is closed. The front map lamps are located on the control panel (if equipped). First row map lamps may also be located in the overhead console (if equipped). Press the controls on either side of each map lamp to activate the lamps.

HOMELINKT UNIVERSAL TRANSCEIVER (IF EQUIPPED) The HomeLinkt Universal Transceiver, located on the overhead console, provides a convenient way to replace up to three hand-held transmitters with a single built-in device. This feature will learn the radio frequency codes of most current transmitters to operate garage doors, entry gate operators, security systems, entry door locks, and home or office lighting.

When programming your HomeLinkt Universal Transceiver to a garage door or gate, be sure that people and objects are out of

the way to prevent potential harm or damage.

103

Controls and features

Do not use the HomeLinkt Universal Transceiver with any garage door opener that lacks safety stop and reverse features as required by U.S. federal safety standards (this includes any garage door opener model manufactured before April 1, 1982). A garage door which cannot detect an object, signaling the door to stop and reverse, does not meet current U.S. federal safety standards. For more information, contact HomeLinkt at: www.homelink.com or 1–800–355–3515. Retain the original transmitter for use in other vehicles as well as for future programming procedures (i.e. new HomeLinkt equipped vehicle purchase). It is also suggested that upon the sale of the vehicle, the programmed Homelinkt Universal Transceiver buttons be erased for security purposes, refer to Programming in this section.

Programming Do not program the HomeLinkt Universal Transceiver with the vehicle parked in the garage. Note: Some vehicles may require the ignition switch to be turned to the second (or “ACC”) position for programming and/or operation of the HomeLinkt. It is also recommended that a new battery be placed in the hand-held transmitter of the device being programmed to HomeLinkt for quicker training and accurate transmission of the radio-frequency signal. 1. Press and hold the two outside buttons releasing only when the red light begins to flash after 20
seconds. Do not repeat step one to program additional hand-held transmitters to the remaining two HomeLinkt buttons. This will erase previously programmed hand-held transmitter signals into HomeLinkt. 2. Position the end of your hand-held transmitter 2–8 cm (1–3 inches) away from the HomeLinkt Universal Transceiver surface (located on your overhead console) while keeping the red light in view.

104

Controls and features

3. Simultaneously press and hold both the HomeLinkt and hand-held transmitter button. Do not release the buttons until step 4 has been completed. Some entry gates and garage door openers may require you to replace step 3 with procedures noted in the “Gate Operator and Canadian Programming” section for Canadian residents. 4. The red light will flash slowly and then rapidly. Release both buttons when the red light flashes rapidly. (The rapid flashing light indicates acceptance of the hand-held transmitters’ radio frequency signals.) 5. Press and hold the just-trained HomeLinkt button and observe the red light. If the light is a constant red, programming is complete and your device should activate when the HomeLinkt button is pressed and released. Note: To program the remaining two HomeLinkt buttons, begin with step 2 in the “Programming” section — do not repeat step 1. If the red light blinks rapidly for two seconds and then turns to a continuous red, proceed with steps 6 through 8 to complete programming of a rolling code equipped device. 6. At the garage door opener receiver (motor-head unit) in the garage, locate the “learn” or “smart” button (usually near where the hanging antenna wire is attached to the unit). 7. Press and release the “learn” or “smart” button. (The name and color of the button may vary by manufacturer.) Note: There are 30 seconds in which to initiate step eight. 8. Return to the vehicle and firmly press, hold for two seconds and release the HomeLinkt button. Repeat the press/hold/release sequence again, and, depending on the brand of the garage door opener (or other rolling code equipped device), repeat this sequence a third time to complete the programming. HomeLinkt should now activate your rolling code equipped device. To program additional HomeLinkt buttons begin with step 2 in the “Programming” section. For questions or comments, please contact HomeLink at www.homelink.com or 1–800–355–3515.

105

Controls and features

Gate Operator & Canadian Programming During programming, your hand-held transmitter may automatically stop transmitting — not allowing enough time for HomeLinkt to accept the signal from the hand-held transmitter. After completing steps 1 and 2
outlined in the “Programming” section, replace step 3 with the following: Note: If programming a garage door opener or gate operator, it is advised to unplug the device during the “cycling” process to prevent overheating. † Continue to press and hold the HomeLinkt button (note step 3 in the

“Programming” section) while you press and release — every two seconds (“cycle”) your hand-held transmitter until the frequency signal has been accepted by the HomeLinkt. The red indicator light will flash slowly and then rapidly after HomeLinkt accepts the radio frequency signal.

† Proceed with step 4 in the “Programming” section.

Operating the HomeLinkT Universal Transceiver To operate, simply press and release the appropriate HomeLinkt button. Activation will now occur for the trained product (garage door, gate operator, security system, entry door lock, or home or office lighting etc.). For convenience, the hand-held transmitter of the device may also be used at any time. In the event that there are still programming difficulties, contact Homelinkt at www.homelink.com or 1–800–355–3515.

106

Controls and features

Erasing HomeLinkT buttons To erase the three programmed buttons (individual buttons cannot be erased): † Press and hold the two outer

HomeLinkt buttons until the red indicator light begins to flash-after 20 seconds. Release both buttons. Do not hold for longer that 30 seconds.

HomeLinkt is now in the train (or learning) mode and can be programmed at any time beginning with step 2 in the “Programming” section. ReprogrammingasingleHomeLinkT button To program a device to HomeLinkt using a HomeLinkt button previously trained, follow these steps: 1. Press and hold the desired HomeLinkt button. Do NOT release the button. 2. The red indicator light will begin to flash after 20 seconds. Without releasing the HomeLinkt button, follow step 2 in the “Programming” section. For questions or comments, contact HomeLinkt at www.homelink.com or 1–800–355–3515.

AUTOMATIC DIMMING REAR VIEW MIRROR