1999 Ford Explorer Owners Manual

SEEK

TUNE

CLK

TAPE AMS

† †

to decrease minutes and to increase minutes.

SEEK

TUNE

SEEK

TUNE

39

Controls and features

AM/FM Stereo / Single CD Radio

VOL - PUSH ON

SEEK

TUNE

AM FM

CD

BASS

TREB

FM1

ST

BAL

FADE

DISC

SCN

CLK

EJ

COMP

Volume/powercontrol Press the control to turn the audio system on or off.

VOL - PUSH ON

Turn the control to raise or lower volume.

VOL - PUSH ON

If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on.

40

AM/FMselect The AM/FM select control works in radio and CD modes.

Controls and features

AM FM

CD

AM/FMselectinradiomode This control allows you to select AM or FM frequency bands. Press the control to switch between AM, FM1 or FM2 memory preset stations. AM/FMselectinCDmode Press this control to stop CD play and begin radio play. Tuneadjust The tune control works in radio mode. Tuneadjustinradiomode † Press

to move to the next

frequency down the band (whether or not a listenable station is located there). Hold the control to move through the frequencies quickly.

† Press

SEEK

TUNE

to move to the next frequency up the band (whether or not

a listenable station is located there). Hold for quick movement.

Seekfunction The seek function control works in radio or CD mode. Seekfunctioninradiomode † Press

to find the next

listenable station down the frequency band.

SEEK

TUNE

41

to find the next listenable station up the frequency band.

Controls and features † Press SeekfunctioninCDmode † Press † Press

to listen to the next

selection.

to listen to the previous

selection.

Scanfunction The scan function works in radio or CD mode.

SEEK

TUNE

SCN

Scanfunctioninradiomode Press the SCAN control to hear a brief sampling of all listenable stations on the frequency band. Press the SCAN control again to stop the scan mode. ScanfunctioninCDmode Press the SCAN control to hear a short sampling of all selections on the CD. (The CD scans in a forward direction, wrapping back to the first track at the end of the CD.) To stop on a particular selection, press the control again. Radiostationmemorypreset The radio is equipped with four or six station memory preset controls. These controls can be used to select up to four or six preset AM stations and eight or twelve FM stations (four to six in FM1 and four to six in FM2). Settingmemorypresetstations 1. Select the frequency band with the AM/FM select control. 2. Select a station. Refer to Tune adjust or Seek function for more information on selecting a station. 3. Press and hold a memory preset control until the sound returns, indicating the station is held in memory on the control you selected.

42

Controls and features

Bassadjust The bass adjust control allows you to increase or decrease the audio system’s bass output.

Trebleadjust The treble adjust control allows you to increase or decrease the audio system’s treble output.

Speakerbalanceadjust Speaker sound distribution can be adjusted between the right and left speakers.

BASS

TREB

BAL

43

Controls and features

Speakerfadeadjust Speaker sound can be adjusted between the front and rear speakers.

CDselect † To begin CD play (if CD[s] are loaded), press the CD control. The first track of the disc will begin playing. After that, CD play will begin where it stopped last.

Ejectfunction Press the control to stop and eject a CD.

FADE

AM FM CD

EJ

Compressionfeature Compression adjust brings soft and loud CD passages together for a more consistent listening level. Press the COMP control to activate and deactivate compression adjust. Settingtheclock To set the hour, press and hold the CLK control and press:

COMP

SCN

CLK

44

† †

to decrease hours and to increase hours.

Controls and features

To set the minute, press and hold the CLK control and press:

SEEK

TUNE

SEEK

TUNE

SCN

CLK

† †

to decrease minutes and to increase minutes.

SEEK

TUNE

SEEK

TUNE

45

Controls and features

Premium AM/FM Stereo/Cassette/Single CD/Premium Sound

VOL - PUSH ON

DISC

FM 1
AMC

BL

ST

RF

DOLBY B NR

EJ

TAPE

CD

AM

FM

SEEK

TUNE

REW

SCAN

BASS

TREB

FF

SIDE 1-2

SEL

EJ

MUTE

AUTO

CLK

BAL

FADE

COMP

SHUFFLE

VOL - PUSH ON

Volume/powercontrol Press the control to turn the audio system on or off. Audio power can also be turned on by pressing the AM/FM select control or the tape/CD select control. Audio power is turned off by using the volume/power control.

Turn control to raise or lower volume.

VOL - PUSH ON

46

Controls and features

If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on. AM/FMselect The AM/FM select control works in radio, tape and CD modes.

AM

FM

AM/FMselectinradiomode This control allows you to select AM or FM frequency bands. Press the control to switch between AM, FM1 or FM2 memory preset stations. AM/FMselectintapemode Press this control to stop tape play and begin radio play. AM/FMselectinCDorCDchangermode(ifequipped) Press this control to stop CD play and begin radio play. Tuneadjust The tune control works in radio or CD changer mode. Tuneadjustinradiomode † Press

to move to the next

SEEK

SEEK

frequency down the band (whether or not a listenable station is located there). Hold the control to move through the frequencies quickly.

to move to the next

frequency up the band (whether or not a listenable station is located there). Hold for quick movement.

† Press

TUNE

TUNE

47

Controls and features

TuneadjustforCDchanger(ifequipped) † Press

to select the previous

disc in the CD changer. (Play will begin on the first track of the disc unless the CD changer is in shuffle mode. Refer to Shuffle feature for more information. Hold the control to continue reversing through the remaining discs. † Press

to select the next disc

SEEK

TUNE

SEEK

TUNE

in the CD changer. Hold the control to fast-forward through the remaining discs.

Seekfunction The seek function control works in radio, tape or CD mode. Seekfunctioninradiomode † Press

to find the next

† Press

listenable station down the frequency band.

to find the next

listenable station up the frequency band.

SEEK

TUNE

SEEK

TUNE

Seekfunctionintapemode † Press † Press

to listen to the previous selection on the tape. to listen to the next selection on the tape.

48

Controls and features

SeekfunctionforCDorCDchanger(ifequipped) † Press

to seek to the previous

track of the current disc. If a selection has been playing for three seconds or more and you press , the CD changer will replay that selection from the beginning.

† Press

to seek forward to the

next track of the current disc. After the last track has been completed, the first track of the current disc will automatically replay.

SEEK

TUNE

SEEK

TUNE

Scanfunction The scan function works in radio, tape or CD mode.

SCAN

Scanfunctioninradiomode Press the SCAN control to hear a brief sampling of all listenable stations on the frequency band. Press the control again to stop the scan mode. Scanfunctionintapemode Press the SCAN control to hear a short sampling of all selections on the tape. (The tape scans in a forward direction. At the end of the tape’s first side, direction automatically reverses to the opposite side of the tape.) To stop on a particular selection, press the control again. ScanfunctioninCDorCDchangermode(ifequipped) Press the SCAN control to hear a short sampling of all selections on the CD. (The CD scans in a forward direction, wrapping back to the first track at the end of the CD.) To stop on a particular selection, press the control again. Radiostationmemorypreset The radio is equipped with six station memory preset controls. These controls can be used to select up to six preset AM stations and twelve FM stations (six in FM1 and six in FM2).

49

Controls and features

Settingmemorypresetstations

AM

FM

1. Select the frequency band with the AM/FM select control. 2. Select a station. Refer to Tune adjust or Seek function for more information on selecting a station.

REW

FF

SIDE 1-2

COMP

SHUFFLE

3. Press and hold a memory preset control until the sound returns, indicating the station is held in memory on the control you selected. Autosetmemorypreset Autoset allows you to set strong radio stations without losing your original manually set preset stations. This feature is helpful on trips when you travel between cities with different radio stations. Startingautosetmemorypreset 1. Select a frequency using the AM/FM select controls. 2. Press the AUTO control. 3. When the first six strong stations are filled, the station stored in memory preset control 1 will start playing. If there are less than six strong stations available on the frequency band, the remaining memory preset controls will all store the last strong station available.

AUTO

CLK

50

Controls and features

These stations are temporarily stored in the memory preset controls (until deactivated) and are accessed in the same manner of your original presets. To deactivate autoset and return to your audio system’s manually set memory stations, press the AUTO control again. Bassadjust The bass adjust control allows you to increase or decrease the audio system’s bass output. Press the BASS control then press: † to decrease the bass output †

to increase the bass output.

BASS

TREB

and

SEL

Trebleadjust The treble adjust control allows you to increase or decrease the audio system’s treble output. Press the TREB control then press: † to decrease the treble output †

to increase the treble output.

and

BASS

TREB

SEL

Speakerbalanceadjust Speaker sound distribution can be adjusted between the right and left speakers.

BAL

FADE

51

Controls and features

Press the BAL control then press: † †

to shift sound to the left and to shift sound to the right.

Speakerfadeadjust Speaker sound can be adjusted between the front and rear speakers. Press the FADE control then press: † †

to shift the sound to the

to shift the sound to the rear.

front and

SEL

BAL

FADE

SEL

Tape/CDselect † To begin tape play (with a tape loaded into the audio system) while in the radio or CD mode, press the TAPE control. Press the button during rewind or fast forward to stop the rewind or fast forward function.

† To begin CD play (if CD(s) are loaded), press the CD control. The first track of the disc will begin playing. If returning from radio or tape mode, CD play will begin where it stopped last.

TAPE

TAPE

CD

CD

With the dual media audio system, press the CD control to toggle between single CD and CD changer play (if equipped).

52

continue until rewind is stopped (with the TAPE control) or the beginning of the tape is reached. † In CD mode, pressing the REW control rewinds the CD within the

Rewind The rewind control works in tape and CD modes. † In tape mode, radio play will

current track.

Fastforward The fast forward control works in tape and CD modes. † In the tape mode, tape direction will automatically reverse when the end of the tape is reached.

Controls and features

REW

FF

† In CD mode, pressing the control fast forwards the CD within the

current track.

Tapedirectionselect Press SIDE 1–2 to play the alternate side of a tape.

Ejectfunction Press the EJ control to stop and eject a tape.

Press the EJ control to stop and eject a CD. Dolbynoisereduction Dolby noise reduction reduces the amount of hiss and static during tape playback. Press the control to activate (and deactivate) the noise reduction.

SIDE 1-2

EJ

EJ

53

Controls and features

Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. “Dolby” and the double-D symbol

are trademarks of Dolby Laboratories Licensing Corporation.

COMP

Compressionadjust Compression adjust brings soft and loud CD passages together for a more consistent listening level. Press the COMP control to activate and deactivate compression adjust. Shufflefeature The shuffle feature operates in CD mode and plays all tracks on the current disc in random order. If equipped with the CD changer, the shuffle feature continues to the next disc after all tracks on the current disc are played. Press the SHUFFLE control to start this feature. Random order play will continue until the SHUFFLE control is pressed again. Settingtheclock To set the hour, press and hold the CLK control and press SEEK:

SHUFFLE

AUTO

CLK

SEEK

TUNE

SEEK

TUNE

to decrease hours and to increase hours.

† †

54

Controls and features

AUTO

CLK

SEEK

TUNE

SEEK

TUNE

To set the minute, press and hold the CLK control and press TUNE:

to decrease minutes and to increase minutes.

† † If your vehicle has a separate clock module, (other than the digital radio display), the CLK button will not function in the above manner.

AUTO

The CLK button will allow you to switch between media display mode (radio station, stereo information, etc.) and clock display mode (time). When in clock mode, the media information will display for ten seconds, when the radio is turned on, and then revert to clock information. Anytime that the media is changed, (new radio station, etc.), the media information will again display for ten seconds before reverting back to the clock. In media mode, the media information will always be displayed.

CLK

55

Controls and features

Mutemode Press the control to mute the playing media. Press the control again to return to the playing media.

EJ

MUTE

SEEK

MODE

MEMORY

- VOLUME +

Rearseatcontrols(ifequipped) The Personal Audio System, a feature of the optional Premium AM/FM Stereo/Cassette/Single CD/Premium Sound and the MACHt Audio System with AM/FM Stereo/Cassette/Single CD, allows front and middle seat passengers to listen to different media sources (radio, cassette or CD) simultaneously. However, the front and middle-seat passengers cannot listen to two different radio stations at the same time. To turn on the rear seat controls, press the memory preset controls 3
will and 5 at the same time. The appear in the display. Pressing 3 and 5 at the same time again will turn the rear seat controls off. If there is a discrepancy between the rear seat and the front audio controls, (such as both trying to listen to the same playing media), the front audio system will receive the desired selection.

COMP

REW

SIDE 1-2

FF

SHUFFLE

56

Controls and features

- VOLUME +

MODE

SEEK

MEMORY

To activate the Personal Audio System, press the speaker/headphone control. Press the MODE control to change audio sources (for headphone mode only). Use the SEEK, VOLUME and MEMORY controls to make adjustments to the playing media.

Adjustingthevolume Press the + control to increase volume. Press the - control to decrease volume.

- VOLUME +

MODE

SEEK

MEMORY

From the rear seat controls, volume control can be set no higher than the current radio setting unless the speakers are turned off. Refer to Turning speakers on and off.

- VOLUME +

MODE

SEEK

MEMORY

57

Controls and features

Turningthespeakersonandoff Press to turn all speakers on or off.

- VOLUME +

MODE

SEEK

MEMORY

jack. Press the

Usingheadphones Plug a 3.5 mm headphone (not included) into the speaker on/off control to operate the headphones. The rear speakers will cut out once the speaker on/off control is pressed. The front speaker will remain playing for the front passengers. Press the control again to deactivate the headphones. Modeselect Push the MODE control to toggle between AM, FM1, FM2, tape, CD or CD changer (if equipped).

- VOLUME +

MODE

SEEK

MEMORY

58

Memorypresetcontrol Push the MEMORY control successively to allow rear seat passengers to scroll through the 6
memory presets in AM, FM1 or FM2. Push the MEMORY control in CD changer mode (if equipped) to advance to the next disc.

Seekfunction † In radio mode, press to find the next listenable station down the frequency band. † In radio mode, press

to find

the next listenable station up the frequency band.

† In tape mode, use the SEEK function to access the next previous

selection.

† In CD mode (if equipped), use

or

the SEEK function to access the next

Controls and features

- VOLUME +

MODE

SEEK

MEMORY

- VOLUME +

MODE

SEEK

MEMORY

or previous

selection.

59

Controls and features

MACHT Audio System with AM/FM Stereo/Cassette/Single CD

VOL - PUSH ON

DISC

FM1

ST

EJ

MUTE

AM

FM

SEEK

TUNE

REW

DOLBY B NR

EJ

TAPE

CD

AUTO

SCAN

BASS

TREB

FF

SIDE 1-2

SEL

BAL

FADE

RDS

COMP

SHUFFLE

Your audio system is equipped with selective lighting, a unique lighting strategy. This lighting feature is operable when the headlamps are illuminated. During the operation of any selected mode, lighting for the individual function controls will either illuminate or turn off. Those controls which have a function for the specific mode of operation selected will be lit, while the controls which have no function for that mode will be turned off. Volume/powercontrol Press the control to turn the audio system on or off.

VOL - PUSH ON

60

Controls and features

Turn control to raise or lower volume.

VOL - PUSH ON

If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on. If you wish to maintain your preset volume level, turn the audio system off with the power control before switching off the ignition. AM/FMselect The AM/FM select control works in radio, tape and CD modes.

AM

FM

AM/FMselectinradiomode This control allows you to select AM or FM frequency bands. Press the control to switch between AM, FM1 or FM2 memory preset stations. AM/FMselectintapemode Press this control to stop tape play and begin radio play. AM/FMselectinCDmode Press this control to stop CD play and begin radio play. Tuneadjust The tune control works in radio or CD mode.

61

Controls and features

Tuneadjustinradiomode † Press

to move to the next

frequency down the band (whether or not a listenable station is located there). Hold the control to move through the frequencies quickly.

to move to the next

frequency up the band (whether or not a listenable station is located there). Hold for quick movement.

† Press

SEEK

TUNE

SEEK

TUNE

SEEK

TUNE

SEEK

TUNE

TuneadjustforCDchanger(ifequipped) † Press

to select the previous

disc in the CD changer. (Play will begin on the first track of the disc unless the CD changer is in shuffle mode. Refer to Shuffle feature for more information. Hold the control to continue reversing through the disc.

to select the next disc

† Press

in the CD changer. Hold the control to fast-forward through the remaining discs.

Seekfunction The seek function control works in radio, tape or CD mode. Seekfunctioninradiomode † Press

to find the next

† Press

listenable station down the frequency band.

to find the next

listenable station up the frequency band.

62

SEEK

TUNE

SEEK

TUNE

Controls and features

Seekfunctionintapemode † Press † Press SeekfunctionforCDchanger(ifequipped) † Press

to listen to the previous selection on the tape. to listen to the next selection on the tape.

to seek to the previous

track of the current disc. If a selection has been playing for three seconds or more and you , the CD changer will press replay that selection from the beginning.

† Press

to seek forward to the

next track of the current disc. After the last track has been completed, the first track of the current disc will automatically replay.

SEEK

TUNE

SEEK

TUNE

Scanfunction The scan function works in radio, tape or CD mode.

SCAN

Scanfunctioninradiomode Press the SCAN control to hear a brief sampling of all listenable stations on the frequency band. Press the control again to stop the scan mode. Scanfunctionintapemode Press the SCAN control to hear a short sampling of all selections on the tape. (The tape scans in a forward direction. At the end of the tape’s first side, direction automatically reverses to the opposite side of the tape.) To stop on a particular selection, press the control again. ScanfunctioninCDmode Press the SCAN control to hear a short sampling of all selections on the CD. (The CD scans in a forward direction, wrapping back to the first track at the end of the CD.) To stop on a particular selection, press the control again.

63

Controls and features

Radiostationmemorypreset The radio is equipped with six station memory preset controls. These controls can be used to select up to six preset AM stations and twelve FM stations (six in FM1 and six in FM2). Settingmemorypresetstations 1. Select the frequency band with the AM/FM select control. 2. Select a station. Refer to Tune adjust or Seek function for more information on selecting a station. 3. Press and hold a memory preset control until the sound returns, indicating the station is held in memory on the control you selected.

AM

FM

COMP

REW

SIDE 1-2

FF

SHUFFLE

Autosetmemorypreset Autoset allows you to set strong radio stations without losing your original manually set preset stations. This feature is helpful on trips when you travel between cities with different radio stations. Startingautosetmemorypreset 1. Select a frequency using the AM/FM select controls. 2. Press the AUTO control. 3. When the first six strong stations are filled, the station stored in memory preset control 1 will start playing. If there are less than six strong stations available on the frequency band, the remaining memory preset controls will all store the last strong station available. To deactivate autoset and return to your audio system’s manually set memory stations, press the AUTO control again.

AUTO

RDS

64

Controls and features

Bassadjust The bass adjust control allows you to increase or decrease the audio system’s bass output. Press the BASS control then press: † to decrease bass output and † to increase bass output.

BASS

TREB

SEL

Trebleadjust The treble adjust control allows you to increase or decrease the audio system’s treble output. Press the TREB control then press: † to decrease treble output and † to increase treble output.

BASS

TREB

SEL

Speakerbalanceadjust Speaker sound distribution can be adjusted between the right and left speakers. Press the BAL control then press:

BAL

FADE

65

Controls and features

† †

to shift sound to the left and to shift sound to the right.

SEL

Speakerfadeadjust Speaker sound can be adjusted between the front and rear speakers. Press the FADE control then press: † †

to shift sound to the front

to shift sound to the rear.

and

BAL

FADE

SEL

Tape/CD/CDchanger(ifequipped)select † To begin tape play (with a tape loaded into the audio system) while in the radio or CD mode, press the TAPE control. Press the button during rewind or fast forward to stop the rewind or fast forward function.

TAPE

CD

† To begin CD play (if CD(s) are loaded), press the CD control. The first track of the disc will begin playing. After that CD play will begin where it stopped last.

TAPE

CD

If equipped with a CD changer, press the CD control to toggle between single CD and CD changer play.

66

Rewind The rewind control works in tape and CD modes. † In tape mode, radio play will

Controls and features

REW

continue until rewind is stopped (with the TAPE control) or the beginning of the tape is reached. † In CD mode, pressing the REW control for less than three seconds

results in slow rewind. Pressing the control for more than three seconds results in fast rewind.

Fastforward The fast forward control works in tape and CD modes. † In the tape mode, tape direction will automatically reverse when the end of the tape is reached.

FF

† In CD mode, pressing the control for less than three seconds results in slow forward action. Pressing the control for more than three seconds results in fast forward action.

Tapedirectionselect Press SIDE 1–2 to play the alternate side of a tape.

Ejectfunction Press the control to stop and eject a tape.

Press the control to stop and eject a CD. Dolbynoisereduction Dolby noise reduction reduces the amount of hiss and static during tape playback. Press the control to activate (and deactivate) the noise reduction.

SIDE 1-2

EJ

EJ

67

Controls and features

Dolby noise reduction manufactured under license from Dolby Laboratories Licensing Corporation. “Dolby” and the double-D symbol

are trademarks of Dolby Laboratories Licensing Corporation.

COMP

Compressionadjust Compression adjust brings soft and loud CD passages together for a more consistent listening level. Press the COMP control to activate and deactivate compression adjust. Shufflefeature The shuffle feature operates in CD mode and plays all tracks on the current disc in random order. If equipped with the CD changer, the shuffle feature continues to the next disc after all tracks on the current disc are played. Press the SHUFFLE control to start this feature. Random order play will continue until the SHUFFLE control is pressed again. Settingtheclock Press the clock/RDS control until SELECT HOUR is displayed and press:

SHUFFLE

AUTO

RDS

SEL

to decrease hours and to increase hours.

† †

68

Controls and features

To set the minute, press the clock/RDS control until SELECT MIN is displayed and press:

† †

to decrease minutes and to increase minutes.

RadioDataSystem(RDS)feature This feature allows your audio system to receive text information from RDS-equipped FM radio stations. Press and hold the control for three seconds to turn the feature on or off. Press the control to scroll through the following selections:

AUTO

RDS

SEL

AUTO

RDS

69

Controls and features

RDStrafficannouncement † Press the RDS control until

TRAFFIC is displayed.

† Use the SELECT control to select ON or OFF. With the feature ON, use the SEEK or SCAN control to find a radio station broadcasting a traffic report (if it is broadcasting RDS data).

RDSselectprogramtype † Press the RDS control until FIND

program type is displayed.

† Use the SEL control to select the program type. With the feature on, use the SEEK or AUTOSET or SCAN control to find the desired program type from the following selections:

70

AUTO

RDS

SEL

AUTO

RDS

SEL

† Classic † Country † Info † Jazz/R&B † Religious † Rock † Soft † Top 40
RDSshow † With the RDS menu enabled, press the RDS control until SHOW is displayed.

† Use the SEL control to select TYPE, NAME, TEXT or NONE. When your radio is turned to a RDS station, RDS station TYPE, station NAME, or TEXT message will be displayed along with the frequency. Press SEL in order to scroll through the text messages.

Mutemode Press the control to mute the playing media. Press the control again to return to the playing media.

Controls and features

AUTO

RDS

SEL

EJ

MUTE

71

Controls and features

SEEK

MODE

MEMORY

- VOLUME +

Rearseatcontrols(ifequipped) The Personal Audio System, a feature of the optional Premium AM/FM Stereo/Cassette/Single CD/Premium Sound and the MACHt Audio System with AM/FM Stereo/Cassette/Single CD, allows front and middle seat passengers to listen to different media sources (radio, cassette or CD) simultaneously. However, the front and middle-seat passengers cannot listen to two different radio stations at the same time. To turn on the rear seat controls, press the memory preset controls 3
and 5 at the same time. The will appear in the display. Pressing 3 and 5 at the same time again will turn the rear seat controls off. If there is a discrepancy between the rear seat and the front audio controls, (such as both trying to listen to the same playing media), the front audio system will receive the desired selection. To activate the Personal Audio System, press the speaker/headphone control. Press the MODE control to change audio sources (for headphone mode only). Use the SEEK, VOLUME and MEMORY controls to make adjustments to the playing media.

- VOLUME +

MEMORY

MODE

SEEK

COMP

REW

SIDE 1-2

FF

SHUFFLE

72

Adjustingthevolume Press the + control to increase volume.

Press the - control to decrease volume.

Controls and features

- VOLUME +

MODE

SEEK

MEMORY

- VOLUME +

MODE

SEEK

MEMORY

From the rear seat controls, volume control can be set no higher than the current radio setting unless the speakers are turned off. Refer to Turning speakers on and off. Turningthespeakersonandoff Press to turn all speakers on or off.

- VOLUME +

MODE

SEEK

MEMORY

Usingheadphones Plug a 3.5 mm headphone (not included) into the speaker on/off control to operate the headphones.

jack. Press the

73

Controls and features

The rear speakers will cut out once the speaker on/off control is pressed. The front speaker will remain playing for the front passengers. Press the control again to deactivate the headphones. Modeselect Push the MODE control to toggle between AM, FM1, FM2, tape, CD or CD changer (if equipped).

- VOLUME +

MODE

SEEK

MEMORY

- VOLUME +

MODE

SEEK

MEMORY

- VOLUME +

MODE

SEEK

MEMORY

Memorypresetcontrol Push the MEMORY control successively to allow rear seat passengers to scroll through the 6
memory presets in AM, FM1 or FM2. Push the MEMORY control in CD changer mode (if equipped) to advance to the next disc.

Seekfunction † In radio mode, press to find the next listenable station down the frequency band. † In radio mode, press

to find

the next listenable station up the frequency band.

† In tape mode, use the SEEK function to access the next previous

selection.

or

74

Controls and features † In CD mode (if equipped), use the SEEK function to access the next

or previous

selection.

CD changer (if equipped) The CD changer is located in one of the following locations: † in the trunk † in the center console † under the driver’s seat 1. Slide the door to access the CD changer magazine.

2. Press

to eject the magazine.

3. Turn the magazine (A) over. 4. Using the disc holder release knob (C), pull the disc holder (B) out of the magazine.

75

Controls and features

If you pull too hard on the disc holder, the disc holder may come completely out of the magazine. If this happens, reinsert the disc holder back into the magazine while pressing on the lever (A). 5. Line up the CD with the groove of the disc holder. Ensure that the label on the CD faces downwards. 6. Press in on the disc holder until it locks securely into the magazine. If the disc holders are not fully locked into the magazine, the unit will not operate.

Ensure that the disc holder is evenly inserted and at the same level as the magazine (A). The unit will not operate if the disc holder is not inserted at the same level (B).

Radio power must be turned on to play the CDs in the changer. The magazine may be stored in the glove box when not being used.

76

Controls and features

The CD magazine may be inserted or ejected with the radio power off. ONLY use the magazine supplied with the CD changer, other types will damage the unit. Keep the CD changer door closed. Coins and foreign objects will damage the CD player and void your audio system warranty.

Troubleshooting the CD changer (if equipped)

The laser beam used in the compact disc player is harmful to the eyes. Do not attempt to disassemble the case.

If sound skips: † You may be traveling on a rough road, playing badly scratched discs or

the disc may be dirty. Skipping will not scratch the discs or damage the player.

If your changer does not work, it may be that: † A disc is already loaded where you want to insert a disc. † The disc is inserted with the label surface downward. † The disc is dusty or defective. † The player’s internal temperature is above 60°C (140°F). Allow the † A disc with format and dimensions not within industry standards is

player to cool down before operating.

inserted.

Cleaning compact discs Inspect all discs for contamination before playing. If necessary, clean discs only with an approved CD cleaner and wipe from the center out to the edge. Do not use circular motion.

CD and CD changer care † Handle discs by their edges only. Never touch the playing surface. † Do not expose discs to direct sunlight or heat sources for extended † Do not insert more than one disc into each slot of the CD changer

periods of time.

magazine.

77

Controls and features

Cleaning cassette player (if equipped) Clean the tape player head with a cassette cleaning cartridge after ten to twelve hours of play in order to maintain the best sound and operation.

Cassette and cassette player care † Use only cassettes that are 90 minutes long or less. † Do not expose tapes to direct sunlight, high humidity, extreme heat or

extreme cold. Allow tapes that may have been exposed to extreme temperatures to reach a moderate temperature before playing. † Tighten very loose tapes by inserting a finger or pencil into the hole † Remove loose labels before inserting tapes. † Do not leave tapes in the cassette player for a long time when not

and turning the hub.

being played.

Radio frequency information The Federal Communications Commission (FCC) and the Canadian Radio and Telecommunications Communications (CRTC) establish the frequencies AM and FM stations may use for their broadcasts. Allowable frequencies are: AM 530, 540–1600, 1610 kHz FM 87.9, 88.1–107.1, 107.9 MHz Not all frequencies are used in a given area. Radioreceptionfactors Three factors can affect radio reception: † Distance/strength. The further an FM signal travels, the weaker it is. The listenable range of the average FM station is approximately 40 km (24 miles). This range can be affected by “signal modulation.” Signal modulation is a process radio stations use to increase their strength/volume relative to other stations.

† Terrain. Hills, mountains and tall buildings between your vehicle’s antenna and the radio station signal can cause FM reception problems. Static can be caused on AM stations by power lines, electric fences, traffic lights and thunderstorms. Moving away from an interfering structure (out of its “shadow”) returns your reception to normal.

78

Controls and features † Station overload. Weak signals are sometimes captured by stronger signals when you pass a broadcast tower. A stronger signal may temporarily overtake a weaker signal and play while the weak station frequency is displayed.

The audio system automatically switches to single channel reception if it will improve the reception of a station normally received in stereo.

Audio system warranties and service Refer to the “Warranty Guide” for audio system warranty information. If service is necessary, see your dealer or a qualified technician.

TURN SIGNAL CONTROL † Push down to activate the left † Push up to activate the right turn

turn signal.

signal.

POSITIONS OF THE IGNITION 1. ACCESSORY, allows the electrical accessories such as the radio to operate while the engine is not running. 2. LOCK, locks the steering wheel, automatic transmission gearshift lever and allows key removal. 3. OFF, shuts off the engine and all accessories without locking the steering wheel. 4. ON, all electrical circuits operational. Warning lights illuminated. Key position when driving. 5. START, cranks the engine. Release the key as soon as the engine starts.

79

Controls and features

SPEED CONTROL (IF EQUIPPED)

To turn speed control on † Press ON. Vehicle speed cannot be controlled until the vehicle is traveling at or above 48 km/h (30 mph).

ON

OFF

Do not use the speed control in heavy traffic or on roads that are winding, slippery, or unpaved.

Do not shift the gearshift lever into N (Neutral) with the speed control on.

To turn speed control off † Press OFF or † Turn off the vehicle ignition.

ON

OFF

Once speed control is switched off, the previously programmed set speed will be erased.

80

To set a speed † Press SET/SET ACC/SET ACCEL. For speed control to operate, the speed control must be ON and the vehicle speed must be greater than 48 km/h (30 mph).

Controls and features

RSM

SET ACC

COAST

If you drive up or down a steep hill, your vehicle speed may vary momentarily slower or faster than the set speed. This is normal. Speed control cannot reduce the vehicle speed if it increases above the set speed on a downhill. If your vehicle speed is faster than the set speed while driving on a downhill, you may want to shift to the next lower gear or apply the brakes to reduce your vehicle speed. If your vehicle slows down more than 16 km/h (10 mph) below your set speed on an uphill, your speed control will disengage. This is normal. Pressing RES/RSM/RESUME will re-engage it.

Do not use the speed control in heavy traffic or on roads that are winding, slippery, or unpaved.

To set a higher set speed † Press and hold SET/SET

ACC/SET ACCEL. Release the control when the desired vehicle speed is reached or

† Press and release SET/SET ACC/SET ACCEL. Each press will increase the set speed by 1.6
km/h (1 mph) or

† Accelerate with your accelerator pedal. When the desired vehicle speed is reached, press and release SET/SET ACC/SET ACCEL.

RSM

SET ACC

COAST

81

Controls and features

You can accelerate with the accelerator pedal at any time during speed control usage. Releasing the accelerator pedal will return your vehicle to the previously programmed set speed.

To set a lower set speed † Press and hold CST/COAST. Release the control when the desired speed is reached or † Press and release CST/COAST. Each press will decrease the set speed by 1.6 km/h (1 mph) or

† Depress the brake pedal. When

the desired vehicle speed is reached, press SET/SET ACC/SET ACCEL.

RSM

SET ACC

COAST

RSM

SET ACC

COAST

82

Controls and features

To disengage speed control † Depress the brake pedal or

† Depress the clutch pedal (if

equipped)

Disengaging the speed control will not erase the previously programmed set speed.

Pressing OFF will erase the previously programmed set speed.

ON

OFF

83

Controls and features

To return to a previously set speed † Press RES/RSM/RESUME. For RES/RSM/RESUME to operate, the vehicle speed must be faster than 48 km/h (30 mph).

RSM

SET ACC

COAST

Indicator light This light comes on when either the SET ACC/SET ACCEL or RES/RSM/RESUME controls are pressed. It turns off when the speed control OFF control is pressed, the brake is applied or the ignition is turned to the OFF position.

SPEED CONT

84

Controls and features

TILT STEERING WHEEL (IF EQUIPPED) Pull the tilt steering control toward you to move the steering wheel up or down. Hold the control while adjusting the wheel to the desired position, then release the control to lock the steering wheel in position.

Never adjust the steering wheel when the vehicle is moving.

HAZARD FLASHER For information on the hazard flasher control, refer to Hazard flasher in the Roadside emergencies chapter.

WINDSHIELD WIPER/WASHER CONTROLS Rotate the windshield wiper control to the desired interval, low or high speed position. The bars of varying length are for intermittent wipers. When in this position rotate the control upward for fast intervals and downward for slow intervals.

85

Controls and features

Push the control on the end of the stalk to activate washer. Push and hold for a longer wash cycle. The washer will automatically shut off after ten seconds of continuous use.

Speed dependent wipers When the windshield wiper control is set on the intermittent settings, speed-sensitive front wipers automatically adjust as the vehicle’s speed increases.

Rear window wiper and washer For rear wiper operation, rotate the rear window wiper and washer control to the desired interval position.

Press the control for rear washer fluid operation.

R.WIPE

OFF

HI

PUSH

R.WIPE

OFF

HI

PUSH

STEERING WHEEL CONTROLS (IF EQUIPPED) These controls allow you to operate some radio and climate control features.

86

Controls and features

Radio control features † Press BAND/MODE to select AM,

FM1, FM2, TAPE or CD (if equipped).

In Radio mode: † Press MEM/NEXT to select a preset station from memory.

NEXT

MODE

In Tape mode: † Press MEM/NEXT to listen to the next selection on the tape. In CD mode: † Press MEM/NEXT to listen to the next track on the disc. In any mode: † Press VOL up or down to adjust the volume. Climate control features † Press TEMP up or down to adjust temperature. † Press FAN up or down to adjust fan speed. OVERHEAD CONSOLE (IF EQUIPPED) The appearance of your vehicle’s overhead console will vary according to your option package. All overhead consoles show the outside temperature and compass display.

87

Controls and features

Storage compartment (if equipped) Press the OPEN control to open the storage compartment. The door will open slightly and can be moved to full open.

door.

Installing a garage door opener (if equipped) The storage compartment can be converted to accommodate a variety of aftermarket garage door openers: † Remove the storage clip from the † Place Velcroy hook onto side of aftermarket transmitter opposite of actuator control. † Place the transmitter into storage † Place the provided height

compartment, control down.

adaptors onto the back of the GARAGE control as needed.

88

† Press the GARAGE control to

activate the transmitter.

Controls and features

Moon roof (if equipped) You can move the moon roof back to open the glass panel or tilt up to ventilate the vehicle. To open the moon roof: The moon roof is equipped with an automatic, one-touch, express opening feature. Press and release the rear portion of the control. To stop motion at any time during the one-touch opening, press the control