Download PDF Manual

driving with a heavy load ......109
location ....................................109


GVWR (Gross Vehicle Weight Rating) .......................................109
calculating ...............................109
definition .................................109
driving with a heavy load ......109
location ....................................109


Hazard flashers .........................115
Head restraints ...........................65
Headlamps ...................................44
aiming ..............................181–183
bulb specifications ..................181
daytime running lights .............44
flash to pass ..............................45
high beam ...........................11, 45
replacing bulbs .......................176
turning on and off ....................44
warning chime ..........................13
Heating ........................................38
heater only system ...................38
heating and air conditioning system .......................................40
Hood ..........................................138


Ignition .........................44, 192–193
Infant seats (see Safety seats) ..86


211


Index


Inspection/maintenance (I/M) testing ........................................175
Instrument panel ..........................8
cleaning ...................................187
cluster ..................................8, 187
lighting up panel and interior .......................................17
location of components ..............8


Jack ............................................125
positioning ...............................125
storage .....................................125
Jump-starting your vehicle ......129


Keys


key in ignition chime ...............13
positions of the ignition ...........44


Lamps


bulb replacement specifications chart ................181
cargo lamps ...............................17
daytime running light ...............44
fog lamps ...................................45
headlamps .........................44, 176
headlamps, flash to pass ..........45
instrument panel, dimming .....17
interior lamps ...................53, 180
replacing bulbs .......176, 178–180


Lane change indicator (see Turn signal) .................................46
Lights, warning and indicator ......8
air bag ........................................10
anti-lock brakes (ABS) ......11, 99


212


anti-theft ...................................11
brake ..........................................10
charging system ........................11
fuel cap light .............................12
high beam .................................11
low fuel ........................................8
oil pressure ...............................12
safety belt .................................10
service engine soon ....................9
turn signal indicator .................11
Load limits .................................109
GAWR ......................................109
GVWR ......................................109
trailer towing ..........................109


Locks


childproof ..................................54
Lubricant specifications ...191–192


Manual transaxle


fluid capacities ........................190
lubricant specifications ..........192
reverse .....................................108


Mirrors


cleaning ...................................185
side view mirrors (power) .......18
Moon roof ....................................52
Motorcraft parts ................171, 189


Octane rating ............................169
Odometer .....................................15
Oil (see Engine oil) ..................142


P


Panic alarm feature, remote entry system ................................60
Parking brake ..............................99
Parts (see Motorcraft parts) ....189
Power distribution box (see Fuses) ........................................122
Power door locks ........................54
Power steering ..........................100
fluid, checking and adding ....153
fluid, refill capacity ................190
fluid, specifications .........191–192


Radio ............................................19
Rear window defroster ...............43
Relays ................................117, 125
Remote entry system ...........57, 60
illuminated entry ......................62
locking/unlocking doors .....58–59
opening the trunk .....................59
panic alarm ...............................60
replacement/additional transmitters ...............................61
replacing the batteries .............60
Roof rack ...................................113


Safety belts (see Safety restraints) ........................12, 69–73
Safety defects, reporting ..........208
Safety restraints ....................69–73
belt minder ...............................75
cleaning the safety belts ..78, 188


Index


extension assembly ..................74
for adults .............................70–72
for children ...............................85
lap belt ......................................74
warning light and chime ...10, 12, 75
Safety seats for children ............86
Seat belts (see Safety restraints) ....................................69
Seats ............................................65
child safety seats ......................86
cleaning ...........................187–188
Servicing your vehicle ..............135
Spark plugs, specifications .............189, 192–193
Specification chart, lubricants ...........................191–192
Speed control ..............................46
Speedometer ...............................15
Starting your vehicle ............93, 96
jump starting ..........................129


Steering wheel


tilting .........................................50


Tachometer .................................16
Temperature control (see Climate control) ..........................38
Tires ...........................125, 161–163
changing ..........................125–126
checking the pressure ............163
replacing ..................................164
rotating ....................................163
snow tires and chains ............165
tire grades ...............................162
treadwear ................................162


213


Vehicle loading ..........................109
Ventilating your vehicle .............97


Warning chimes .....................12–13
Warning lights (see Lights) .........8
Washer fluid ..............................147
Water, Driving through .............113
Windows


power .........................................55


Windshield washer fluid and wipers


checking and adding fluid .....147
checking and cleaning ............160
operation ...................................51
replacing wiper blades ...........161
Wrecker towing .........................134


Index


Towing .......................................111
trailer towing ..........................111
wrecker ....................................134


Transaxle


automatic operation ...............101
fluid, refill capacities ..............190
lubricant specifications ..........192


Transmission


fluid, checking and adding (automatic) .............................154
fluid, checking and adding (manual) .................................156
lubricant specifications ..........191
Trip odometer .............................16
Trunk ...........................................56
remote release ....................18, 59
............................11, 46


Turn signal


Vehicle dimensions ...................193
Vehicle Identification Number (VIN) ..........................................195


214


215


Filling station information


Item Required fuel Fuel tank capacity Tire size and pressure


Hood release


Oil capacity (includes filter change) Engine oil


Coolant capacity 1


Information Unleaded fuel only - 87 octane 48.5L (12.8 gallons) Refer to the Certification Label inside of driver’s door. Pull handle under the left side of the instrument panel. Sedan-3.8L (4.0 quarts) ZX2-4.25L (4.5 quarts) Use Motorcraft SAE 5W-20Super Premium Motor Oil, Ford specification WSS-M2C153-H Automatic transaxle-6.0L (6.3
quarts) Manual transaxle-5.0L (5.3 quarts) Fill to line on reservoir. 3.9L (4.1 quarts) 3.35L (3.55 quarts)


Power steering fluid capacity Automatic transaxle capacity Manual transaxle capacity 1Use either green-colored Motorcraft Premium Engine Coolant or yellow-colored Motorcraft Premium Gold Engine Coolant. DO NOT USE Ford Extended Life Engine Coolant (orange in color). Refer to Adding engine coolant, in the Maintenance and Care chapter.


216


Before driving


Introduction


Instrumentation


Controls and features


Seating and safety restraints


Starting and driving


Starting


Driving


Roadside emergencies


Servicing


Maintenance and care


Capacities and specifications


Customer assistance


Reporting safety defects


Index


Contents


17


65


93


98


114


135


189


196


208


209


All rights reserved. Reproduction by any means, electronic or mechanical including photocopying, recording or by any information storage and retrieval system or translation in whole or part is not permitted without written authorization from Ford Motor Company. Ford may change the contents without notice and without incurring obligation. Copyright © 2001 Ford Motor Company


Introduction


The following warning may be required by California law: CALIFORNIA Proposition 65 Warning


WARNING: Engine exhaust, some of its constituents, and certain vehicle components contain or emit chemicals known to


the State of California to cause cancer and birth defects or other reproductive harm. In addition, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.


ICONS Indicates a safety alert. Read the following section on Warnings.


Indicates vehicle information related to recycling and other environmental concerns will follow. Correct vehicle usage and the authorized disposal of waste cleaning and lubrication materials are significant steps towards protecting the environment. Indicates a message regarding child safety restraints. Refer to Seating and safety restraints for more information.


Indicates that this Owner Guide contains information on this subject. Please refer to the Index to locate the appropriate section which will provide you more information.


Introduction


WARNINGS Warnings provide information which may reduce the risk of personal injury and prevent possible damage to others, your vehicle and its equipment.


BREAKING-IN YOUR VEHICLE There are no particular guidelines for breaking-in your vehicle. During the first 1 600 km (1 000 miles) of driving, vary speeds frequently. This is recommended to give the moving parts a chance to break in.


INFORMATION ABOUT THIS GUIDE The information found in this guide was in effect at the time of printing. Ford may change the contents without notice and without incurring obligation.


EMISSION WARRANTY The New Vehicle Limited Warranty includes Bumper-to-Bumper Coverage, Safety Restraint Coverage, Corrosion Coverage, and 7.3L Power Stroke Diesel Engine Coverage. In addition, your vehicle is eligible for Emissions Defect and Emissions Performance Warranties. For a detailed description of what is covered and what is not covered, refer to the Warranty Guide that is provided to you along with your Owner’s Guide.


Introduction


These are some of the symbols you may see on your vehicle.


Vehicle Symbol Glossary


Safety Alert


See Owner’s Guide


Fasten Safety Belt


Air Bag-Front


Air Bag-Side


Child Seat


Child Seat Installation Warning


Child Seat Tether Anchorage


Brake System


Anti-Lock Brake System


Brake Fluid - Non-Petroleum Based


Traction Control


Master Lighting Switch


Hazard Warning Flasher


Fog Lamps-Front


Fuse Compartment


Fuel Pump Reset


Windshield Wash/Wipe


Rear Window Defrost/Demist


Power Window Lockout


Windshield Defrost/Demist


Power Windows Front/Rear


Introduction


Vehicle Symbol Glossary


Child Safety Door Lock/Unlock


Interior Luggage Compartment Release Symbol


Panic Alarm


Engine Oil


Engine Coolant


Engine Coolant Temperature


Do Not Open When Hot


Battery


Avoid Smoking, Flames, or Sparks


Battery Acid


Explosive Gas


Fan Warning


Power Steering Fluid


Maintain Correct Fluid Level


MAX MIN


Emission System


Engine Air Filter


Passenger Compartment Air Filter


Jack


Check fuel cap


Instrumentation


Foglamp control *


(pg. 45)


Instrument cluster


(pg. 8)


Headlamp/turn signal control


(pg. 44)


MIRROR


50


80


40


60


70


100


120


80


90


140


30


60


0 0 0 1 1 3


160


100


4 5


RPMx1000


THEFT


1 2/


FUEL FILL


LOW FUEL


Power side view mirrors*


(pg. 18)


Speed control*


(pg. 46)


Instrument panel dimmer switch


(pg. 17)


Driver air bag


(pg. 79)


Instrumentation


Passenger air bag


(pg. 80)


TAPE CD


Windshield


wiper/washer control


(pg. 51)


I N


M I S T O F F


SEEK TRACK


TUNE DISCS


AM FM


SCAN


VOL PUSH ON


EJ


PREMIUM SOUND


REW


FF


DOLBY B NR


SIDE 1-2


LO


HI


COMP


SHUF


OFF


A/C


MAX A/C


BASS


TREB


BAL


FADE


R.DEF


Climate controls


(pg. 38)


Audio system


(pg. 19)


*if equipped


Instrumentation


WARNING LIGHTS AND CHIMES


Base instrument cluster


1 2/


FUEL FILL


SERVICE ENGINE SOON


LOW FUEL


ABS


BRAKE


50 60 70


80


100


120


0 0 0 0 0


40


30


60


40


20
10 20


0 0 0


MPH km/h


80


140


90
100


160


110


180


120


200



THEFT


CHECK FUEL CAP


ZX2 coupe instrument cluster


50


80


40


60


70


100


120


80


140


90


30


60


0 0 0 0 0


160


100


20


40


10 20


MPH


0 0 0


km/h


180


110


120


4 5


RPMx1000


THEFT


1 2/


FUEL FILL


LOW FUEL


CHECK FUEL CAP


SERVICE ENGINE SOON


BRAKE



ABS


Low fuel Illuminates as an early reminder of a low fuel condition indicated on the fuel gauge (refer to Fuel gauge in this chapter for more information). When refueling, after the light comes on, the amount of fuel that is added will be less than the advertised capacity since there is fuel still in the tank. The ignition must be in the ON position for this lamp to illuminate. The lamp will also illuminate for several seconds after the ignition is turned to the ON position regardless of the fuel level to ensure your bulb is working.


LOW FUEL


Instrumentation


SERVICE ENGINE SOON


Service engine soon Your vehicle is equipped with a computer that monitors the engine’s emission control system. This system is commonly known as the On Board Diagnostics System (OBD II). The OBD II system protects the environment by ensuring that your vehicle continues to meet government emission standards. The OBD II system also assists the service technician in properly servicing your vehicle. The Service Engine Soon indicator light illuminates when the ignition is first turned to the ON position to check the bulb. If it comes on after the engine is started, one of the engine’s emission control systems may be malfunctioning. The light may illuminate without a driveability concern being noted. The vehicle will usually be drivable and will not require towing. WhatyoushoulddoiftheServiceEngineSoonlightilluminates Light turns on solid: This means that the OBD II system has detected a malfunction. Temporary malfunctions may cause your Service Engine Soon light to illuminate. Examples are: 1. The vehicle has run out of fuel. (The engine may misfire or run poorly.) 2. Poor fuel quality or water in the fuel. 3. The fuel cap may not have been properly installed and securely tightened. These temporary malfunctions can be corrected by filling the fuel tank with high quality fuel of the recommended octane and/or properly installing and securely tightening the gas cap. After three driving cycles without these or any other temporary malfunctions present, the Service Engine Soon light should turn off. (A driving cycle consists of a cold engine startup followed by mixed city/highway driving.) No additional vehicle service is required. If the Service Engine Soon light remains on, have your vehicle serviced at the first available opportunity.


Instrumentation


Light is blinking: Engine misfire is occurring which could damage your catalytic converter. You should drive in a moderate fashion (avoid heavy acceleration and deceleration) and have your vehicle serviced at the first available opportunity.


Under engine misfire conditions, excessive exhaust temperatures could damage the catalytic converter, the fuel system, interior floor coverings or other vehicle components, possibly causing a fire.


Air bag readiness Momentarily illuminates when the ignition is turned ON. If the light fails to illuminate, continues to flash or remains on, have the system serviced immediately.


Safety belt Momentarily illuminates when the ignition is turned to the ON position to remind you to fasten your safety belts. For more information, refer to the Seating and safety restraints chapter.


Brake system warning Momentarily illuminates when the ignition is turned to the ON position to indicate a system check. Also illuminates if the parking brake is engaged. If the brake warning lamp does not illuminate at these times, seek service immediately. Illumination after releasing the parking brake indicates low brake fluid level and the brake system should be inspected immediately.


BRAKE


Shift indicator light (if equipped) To maximize fuel economy, the shift indicator light illuminates when the manual transmission should be shifted to the next highest gear.


10


Instrumentation


Anti-lock brake system (ABS) (If equipped) Momentarily illuminates when the ignition is turned to the ON position to ensure the circuit is functional. If the light does not illuminate momentarily at start up, remains on or continues to flash, the ABS needs to be serviced. With the ABS light on, the anti-lock brake system is disabled and normal braking is still effective unless the brake warning light also remains illuminated with the parking brake released.


ABS


Turn signal Illuminates when the left or right turn signal or the hazard lights are turned on. If one or both of the indicators stay on continuously or flash faster, check for a burned-out turn signal bulb. Refer to Bulbs in the Maintenance and care chapter.


High beams Illuminates when the high beam headlamps are turned on.


Anti-theft system (if equipped) Refer to Anti-theft system in the Controls and features chapter.


Charging system Illuminates when the ignition is turned to the ON position and the engine is off. The light also illuminates when the battery is not charging properly, requiring electrical system service.


THEFT


11


Instrumentation


Engine oil pressure Momentarily illuminates when the ignition is turned to the ON position and the engine is off. Illuminates when the oil pressure falls below the normal range. Stop the vehicle as soon as safely possible and switch off the engine immediately. Check the oil level and add oil if needed. Refer to Engine oil in the Maintenance and care chapter.


CHECK FUEL CAP


Check fuel cap (if equipped) Momentarily illuminates when the ignition is turned to the ON position to ensure your bulb is working. When this light turns on, check the fuel filler cap. Continuing to operate the vehicle with the check fuel cap light on, can activate the Service Engine Soon/Check Engine warning light. When the fuel filler cap is properly re-installed, the light(s) will turn off after a period of normal driving. This period will vary depending on driving conditions. It may take a long period of time for the system to detect an improperly installed fuel filler cap. For more information, refer to Fuel filler cap in the Maintenance and care chapter.


Safety belt warning chime Sounds to remind you to fasten your safety belts. For information on the safety belt warning chime, refer to the Seating and safety restraints chapter. Beltminderchime Sounds intermittently to remind you to fasten your safety belts. For information on the safety belt minder chime, refer to the Seating and safety restraints chapter.


Supplemental restraint system (SRS) warning chime For information on the SRS warning chime, refer to the Seating and safety restraints chapter.


12


Instrumentation


Key-in-ignition warning chime Sounds when the key is left in the ignition in the OFF/LOCK or ACC position and the driver’s door is opened.


Headlamps on warning chime Sounds when the headlamps or parking lamps are on, the ignition is off (and the key is not in the ignition) and the driver’s door is opened.


GAUGES


Base instrument cluster gauges


1 2/


FUEL FILL


SERVICE ENGINE SOON


LOW FUEL


ABS


BRAKE


50 60 70


80


100


120


0 0 0 0 0


40


30


60


40


20
10 20


0 0 0


MPH km/h


80


140


90
100


160


110


180


120


200



THEFT


CHECK FUEL CAP


ZX2 coupe instrument cluster gauges


1 2/


FUEL FILL


50


80


40


60


70


100


120


80


140


90


30


60


0 0 0 0 0


160


100


20


40


10 20


MPH


0 0 0


km/h


180


110


120


LOW FUEL


CHECK FUEL CAP


SERVICE ENGINE SOON


BRAKE



ABS


4 5


RPMx1000


THEFT


13


Instrumentation


Fuel gauge Displays approximately how much fuel is in the fuel tank (when the key is in the ON position). The fuel gauge may vary slightly when the vehicle is in motion or after refueling. The ignition should be in the OFF position while the vehicle is being refueled. When the gauge first indicates empty, there is a small amount of reserve fuel in the tank. When refueling the vehicle from an empty indication, the amount of fuel that can be added will be less than the advertised capacity due to the reserve fuel.


1 2/


FUEL FILL


Engine coolant temperature gauge Indicates the temperature of the engine coolant. At normal operating temperature, the needle remains within the normal area (the area between the “H” and “C”). If it enters the red section, the engine is overheating. Stop the vehicle as soon as safely possible, switch off the engine immediately and let the engine cool. Refer to Engine coolant in the Maintenance and care chapter. Never remove the coolant reservoir cap while the engine is running or hot. This gauge indicates the temperature of the engine coolant, not the coolant level. If the coolant is not at its proper level the gauge indication will not be accurate.


14


Speedometer Indicates the current vehicle speed.


Odometer Registers the total kilometers (miles) of the vehicle.


Instrumentation


50


80


40


60


70


100


120


80


140


90


30


60


0 0 0 0 0


160


100


20


40


10 20


MPH


0 0 0


km/h


180


110


120


50


80


40


60


70


100


120


80


140


90


30


60


0 0 0 0 0 0


160


100


20


40


10 20


MPH


0 0 0


km/h


180


110


120


15


Instrumentation


Trip odometer Registers the kilometers (miles) of individual journeys. To reset, depress the control.


50


80


40


60


70


100


120


80


140


90


30


60


0 0 0 0 0 0


160


100


20


40


10 20


MPH


0 0 0 0


km/h


180


110


120


Tachometer (if equipped) Indicates the engine speed in revolutions per minute. Driving with your tachometer pointer in the red zone may damage the engine.


4 5


RPMx1000


THEFT


16


Controls and features


PANEL DIMMER CONTROL Use to adjust the brightness of the instrument panel during headlamp and parklamp operation. Coupe † Rotate up to brighten. † Rotate down to dim.


Sedan † Rotate left to brighten † Rotate right to dim


The dome lamp will not illuminate if the control switch is in the OFF position.


17


Controls and features


POWER SIDE VIEW MIRRORS (IF EQUIPPED) The ignition must be in ACC or ON position to adjust the power side view mirrors. To adjust your mirrors: 1. Select L to adjust the left mirror or R to adjust the right mirror.


MIRRORS L R


2. Move the control in the direction you wish to tilt the mirror.


MIRRORS L R


3. Return to the center position to lock mirrors in place.


TRUNK REMOTE CONTROL Press the remote trunk release control on the instrument panel to open the trunk.


18


N K R ELEA


RELEA


NK


Controls and features


USING YOUR AUDIO SYSTEM


AM/FM Stereo/Cassette


SEEK


TUNE


AM FM


SCAN


VOL PUSH ON


EJ


SIDE 1-2


LO


HI


TAPE


REW


FF


DOLBY B NR


BASS


TREB


BAL


FADE


OFF


R.DEF


A/C


MAX A/C


Volume/powercontrol Press the control to turn the audio system on or off.


VOL PUSH ON


Turn control to raise or lower volume.


VOL PUSH ON


19


Controls and features


If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on. If you wish to maintain your preset volume level, turn the audio system off with the power control before switching off the ignition. AM/FMselect The AM/FM select control works in radio modes.


AM FM


AM/FMselectinradiomode This control allows you to select AM or FM frequency bands. Press the control to switch between AM, FM1
or FM2 memory preset stations.


AM FM


AM/FMselectintapemode Press this control to stop tape play and begin radio play. Tuneadjust The tune control works in radio mode.


SEEK


TUNE


20


Controls and features


Tuneadjustinradiomode † Press the


to move to the next


frequency down the band (whether or not a listenable station is located there). Hold the to move through the frequencies quickly.


† Press the


to move to the next


frequency up the band (whether or not a listenable station is located there). Hold


for quick movement.


Seekfunction The seek function control works in radio or tape mode.


SEEK


TUNE


SEEK


TUNE


to find the next listenable station down the frequency band. to find the next listenable station up the frequency band.


to listen to the previous selection on the tape. to listen to the next selection on the tape.


Seekfunctioninradiomode † Press † Press Seekfunctionintapemode † Press † Press Scanfunction The scan function works in radio or tape mode.


SEEK


TUNE


SCAN


21


Controls and features


Scanfunctioninradiomode Press the SCAN control to hear a brief sampling of all listenable stations on the frequency band. Press the control again to stop the scan mode. Scanfunctionintapemode Press the SCAN control to hear a short sampling of all selections on the tape. (The tape scans in a forward direction. At the end of the tape’s first side, direction automatically reverses to the opposite side of the tape.) To stop on a particular selection, press the control again. Radiostationmemorypreset The radio is equipped with six station memory preset controls. These controls can be used to select up to six preset AM stations and twelve FM stations (six in FM1 and six in FM2). Settingmemorypresetstations 1. Select the frequency band with the AM/FM select control.


AM FM


SIDE 1-2


2. Select a station. Refer to Tune adjust or Seek function for more information on selecting a station. 3. Press and hold a memory preset control until the sound returns, indicating the station is held in memory on the control you selected. Bass/trebleadjust † The bass adjust control allows you to increase or decrease the audio system’s bass output. † The treble adjust control allows you to increase or decrease the audio system’s treble output.


BASS



TREB


BAL


FADE


22


Speakerbalance/fadeadjust † Speaker sound distribution can be


adjusted between the right and left speakers. † Press the BAL control. Toggle


between the + and — control to adjust the speaker sound. † Speaker sound can be adjusted


between the front and rear speakers.


Controls and features


BASS


TREB



BAL


FADE


† Press the FADE control. Toggle between the + and — control to


adjust the speaker sound.


DOLBY B NR


FF


EJ


REW


Insertingatape Push only slightly when inserting a cassette tape (with the open edge to the right). A cassette deck loading mechanism pulls the tape in the rest of the way. You can switch from radio to tape play by inserting a tape into the cassette deck. Tapeplayselect Insert a tape to begin tape play. Push only slightly when inserting a cassette tape (with the open edge to the right). A cassette deck loading mechanism pulls the tape in the rest of the way. Rewind The rewind control works in tape mode. † In tape mode, radio play will


REW


FF


continue until rewind is stopped (with the TAPE control) or the beginning of the tape is reached.


23


Controls and features


Fastforward The fast forward control works in tape mode. † In the tape mode, tape direction will automatically reverse when the end of the tape is reached.


Tapesideselect Press this control to play the alternate side of a tape.


REW


FF


SIDE 1-2


Ejectfunction Press the control to stop and eject a tape.


EJ


REW


FF


DOLBY B NR


DolbyT noisereduction Dolbyt noise reduction operates only in tape mode. Dolbyt noise reduction reduces the amount of hiss and static during tape playback. Press the (and deactivate) Dolbyt noise reduction. Dolbyt noise reduction manufactured under license from Dolbyt Laboratories Licensing Corporation. “Dolbyt” and the double-D symbol are registered trademarks of Dolbyt Laboratories Licensing Corporation.


control to activate


24


Controls and features


Settingtheclock To set the hour, press the hour (h) control and press : † (+) to increase hour and † (−) to decrease hour


To set the minute, press the minute (m) control and press: † (+) to increase minutes and † (−) to decrease minutes.


12:


:01


Premium AM/FM Stereo/Cassette/ Premium Sound (Radio Controlled CD Changer Compatible)


SEEK TRACK


TUNE DISCS


AM FM


SCAN


VOL PUSH ON


TAPE CD


EJ


PREMIUM SOUND


REW


FF


DOLBY B NR


SIDE 1-2


LO


HI


COMP


SHUF


OFF


A/C


MAX A/C


BASS


TREB


BAL


FADE


R.DEF


25


Controls and features


Volume/powercontrol Press the control to turn the audio system on or off.


VOL PUSH ON


Turn control to raise or lower volume.


VOL PUSH ON


If the volume is set above a certain level and the ignition is turned off, the volume will come back on at a “nominal” listening level when the ignition switch is turned back on. If you wish to maintain your preset volume level, turn the audio system off with the power control before switching off the ignition. AM/FMselect The AM/FM select control works in radio, tape and CD modes (if equipped).


AM FM


AM/FMselectinradiomode This control allows you to select AM or FM frequency bands. Press the control to switch between AM, FM1
or FM2 memory preset stations.


AM FM


26


Controls and features


AM/FMselectintapemode Press this control to stop tape play and begin radio play. AM/FMselectinCDmode Press this control to stop CD play and begin radio play. You can switch from CD play to tape play by simply inserting a tape into the cassette deck. Tuneadjust The tune control works in radio or CD mode (if equipped).


SEEK TRACK


TUNE DISCS


SEEK TRACK


TUNE DISCS


Tuneadjustinradiomode † Press the


to move to the next


frequency down the band (whether or not a listenable station is located there). Hold the control to move through the frequencies quickly.


† Press the right side of the control to move to the next frequency up the band (whether or not a listenable station is located there). Hold for quick movement.


27


Controls and features


TuneadjustforCDmode(ifequipped) † Press the


to select the


previous disc in the CD changer. (Play will begin on the first track of the disc unless the CD changer is in shuffle mode. Refer to Shuffle feature for more information. Hold the control to continue reversing through the disc. † Press


SEEK TRACK


TUNE DISCS


to select the next disc in the CD changer. Hold the control


to fast-forward through the remaining discs.


Seekfunction The seek function control works in radio, tape or CD mode (if equipped).


SEEK TRACK


TUNE DISCS


to find the next listenable station up the frequency band.


to find the next listenable station down the frequency


Seekfunctioninradiomode † Press band. † Press Seekfunctionintapemode † Press † Press SeekfunctioninCDmode(ifequipped) † Press selection has been playing for three seconds or more and you press beginning.


to listen to the previous selection on the tape. to listen to the next selection on the tape.


, the CD changer will replay that selection from the


to seek to the previous track of the current disc. If a


28


Controls and features


† Press


to seek forward to the next track of the current disc.


After the last track has been completed, the first track of the current disc will automatically replay.


Scanfunction The scan function works in radio, tape or CD mode (if equipped).


SEEK TRACK


TUNE DISCS


SCAN


Scanfunctioninradiomode Press the SCAN control to hear a brief sampling of all listenable stations on the frequency band. Press the control again to stop the scan mode. Scanfunctionintapemode Press the SCAN control to hear a short sampling of all selections on the tape. (The tape scans in a forward direction. At the end of the tape’s first side, direction automatically reverses to the opposite side of the tape.) To stop on a particular selection, press the control again. ScanfunctioninCDmode(ifequipped) Press the SCAN control to hear a short sampling of all selections on the CD. (The CD scans in a forward direction, wrapping back to the first track at the end of the CD.) To stop on a particular selection, press the control again. Radiostationmemorypreset The radio is equipped with six station memory preset controls. These controls can be used to select up to six preset AM stations and twelve FM stations (six in FM1 and six in FM2). Settingmemorypresetstations 1. Select the frequency band with the AM/FM select control.


AM FM


2. Select a station. Refer to Tune adjust or Seek function for more information on selecting a station.


29


Controls and features


3. Press and hold a memory preset control until the sound returns, indicating the station is held in memory on the control you selected.


SIDE 1-2


COMP


SHUF


Bass/trebleadjust † The bass adjust control allows you to increase or decrease the audio system’s bass output. † The treble adjust control allows you to increase or decrease the audio system’s treble output.


Speakerbalance/fadeadjust † Speaker sound distribution can be


adjusted between the right and left speakers. † Speaker sound can be adjusted


between the front and rear speakers.


BASS


TREB



BAL


FADE


BASS


TREB



BAL


FADE


Insertingatape Push only slightly when inserting a cassette tape (with the open edge to the right). A cassette deck loading mechanism pulls the tape in the rest of the way. You can switch from CD (if equipped) to tape play by inserting a tape into the cassette deck.


REW


EJ


DOLBY B NR


FF


30


Controls and features


Tapeplayselect Insert a tape to begin tape play. Push only slightly when inserting a cassette tape (with the open edge to the right). A cassette deck loading mechanism pulls the tape in the rest of the way. Rewind The rewind control works in tape and CD modes (if equipped). † In tape mode, radio play will


REW


FF


continue until rewind is stopped (with the TAPE control) or the beginning of the tape is reached.


† In CD mode (if equipped), pressing the REW control for less than three seconds results in slow rewind. Pressing the control for more than three seconds results in fast rewind.


Fastforward The fast forward control works in tape and CD modes (if equipped). † In the tape mode, tape direction will automatically reverse when the end of the tape is reached.


REW


FF


† In CD mode, pressing the control for less than three seconds results in slow forward action. Pressing the control for more than three seconds results in fast forward action.


Tapesideselect Press this control to play the alternate side of a tape.


SIDE 1-2


31


Controls and features


Ejectfunction Press the control to stop and eject a tape.


EJ


REW


FF


DOLBY B NR


control to activate


DolbyT noisereduction Dolbyt noise reduction operates only in tape mode. Dolbyt noise reduction reduces the amount of hiss and static during tape playback. Press the (and deactivate) Dolbyt noise reduction. Dolbyt noise reduction is manufactured under license from Dolbyt Laboratories Licensing Corporation. “Dolbyt” and the double-D symbol are registered trademarks of Dolbyt Laboratories Licensing Corporation. Compressionadjust Compression adjust works in CD mode (if equipped), and brings soft and loud CD passages together for a more consistent listening level. Press the COMP control to activate and deactivate compression adjust.


COMP


32


Loading...
x